a. Manual Handling In sheet form, OSB can present a manual handling risk due to its physical dimensions and weight. Good lifting practice should be followed. Note: A 2440 mm by 1220 mm (8‟ x 4‟) sheet of 18 mm (3/4”) OSB3 weighs approximately 33 kg (73 lbs). b. Storage Keep away from heat, sparks, flame and other ignition sources.
However dust from processing should be contained, carefully collected and removed. 7. Handling and Storage a. Manual Handling. In sheet form, OSB ...
SterlingOSB Material Safety Data Sheet Current revision-- Revision 10 June 2017 Norbord Europe Ltd Morayhill, Inverness Highland, IV2 7JQ Scotland UK Phone: +44 (0) 1463 795100 www.norbord.co.uk 1. Identification of the substance/ preparation and Company. Product name: Norbord SterlingOSB, RoofDek, SiteCoat, BuildBoard. Product type: Oriented Strand Board (OSB) Product description: OSB is an engineered panel product in which flakes of softwood are oriented to maximize strength properties and bonded together to form a panel. It is formed using a synthetic adhesive with waterresistant properties. RoofDek: - Coating is odourless, insoluble in water, stable and not considered dangerous under EU directives. Treat as OSB. SiteCoat: - Coating is odourless, insoluble in water, stable and not considered dangerous under EU directives. Treat as OSB. BuildBoard: - Coating is odourless, insoluble in water, stable and not considered dangerous under EU directives. Treat as OSB. Application: Building, construction, furniture components, packaging, decorative fixtures and fittings, for dry internal and moisture resistant applications. See product literature for further information. Company: Norbord Europe Ltd. Station Road Cowie, Stirling Scotland FK7 7BQ Tel: (+44)(0)1786 812 921 In case of emergency: (+44)(0)1786 812 921 (office hours) Ask for Health and Safety or Technical Manager 2. Hazards identification Physical hazard Health hazard Non-classifiable Non-classifiable No hazard or precautionary statements 3. Identification/ information on ingredients. No materials identified for this purpose as specified the Classification, Labelling and Packaging (CLP) regulations 2009 (amended 2016). SterlingOSB Material Safety Data Sheet Norbord Europe Ltd Morayhill, Inverness Highland, IV2 7JQ Scotland UK Phone: +44 (0) 1463 795100 www.norbord.co.uk 4. First aid measures. INHALATION: Inhalation of dust can only occur during reprocessing of the material. If inhalation of dust causes adverse effects, remove to fresh air. If discomfort persists, seek medical advice. SKIN CONTACT: In case of irritation from dust generated from processing, wash with water. EYE CONTACT: If particles enter the eyes during processing, immediately flush eyes with plenty of water. Seek medical attention if irritation persists. 5. Fire-fighting measures Non-flammable at room temperature, but will burn. In case of fire, soak (flood) with water. For large fires, fire fighters should wear full emergency protective equipment including self-contained breathing apparatus. Wood waste or dust may present a fire or explosion hazard - good housekeeping practices must be followed. 6. Accidental Release Measures OSB does not represent a hazard in sheet form. However dust generated from processing should be contained, carefully collected and removed. 7. Handling and Storage a. Manual Handling In sheet form, OSB can present a manual handling risk due to its physical dimensions and weight. Good lifting practice should be followed. Note: A 2440 mm by 1220 mm (8 x 4) sheet of 18 mm (3/4") OSB3 weighs approximately 33 kg (73 lbs). b. Storage Keep away from heat, sparks, flame and other ignition sources. Store at room temperature. Keep away from moisture. Take care during removing packaging, especially banding. Stacking c. Stacking The ground should be flat and even with a minimum of sloping, recommended maximum 2°. Ground should be strong enough to withstand the weight of the packs and the machinery. It should be well consolidated and not affected by adverse weather conditions such as rain. Clear any obstacles such as waste timber or unused bearers from the stacking area as they make stacks unstable. Stacks outside may be affected by wind, make sure the stack is secure, if possible construct the stack so that a small cross section is facing the prevailing wind. Securely attach any protective sheeting. Bearers need to be straight and identical in length. Vertically stacked packs should be of the same size or reduce in size up the stack, avoid overhangs. Further information is available on HSE information sheet `Safe stacking of sawn material and board materials' SterlingOSB Material Safety Data Sheet Norbord Europe Ltd Morayhill, Inverness Highland, IV2 7JQ Scotland UK Phone: +44 (0) 1463 795100 www.norbord.co.uk 8. Exposure Controls/ Personal Protection Health the following health problems are among the effects that have been associated with exposure to wood dust. Skin disorders Obstruction in the nose and rhinitis; Asthma a rare type of nasal cancer a. Exposure Controls During processing, adequate ventilation and/ or extraction should be provided to minimise airborne dust. Whenever possible, fit dust extraction equipment even when using hand-held machines. b. Personal Protection Dust will be created during processing; use appropriate respiratory protection equipment. Wear gloves and overalls as required to prevent skin contact. Wear eye protection to prevent dust particles from entering eyes. Wear the correct clothing and use other safety equipment as necessary. 9. Physical and Chemical Properties Appearance: Wood sheets in various dimensions Odour: Faint wood resin odour under ambient conditions 10. Stability and Reactivity - Considered stable and inert in sheet form. a. Materials to avoid: Reducing and oxidising agents. b. Conditions to avoid: Heating and ignition sources and damp atmospheres. c. Thermal decomposition products are generally as for wood: CO, CO2, aldehydes (including formaldehyde, HCHO) particulate matter and other organic compounds. d. Other Hazards: Processing of OSB will generate wood dust. Appropriate protection from inhalation of the dust is recommended. Also refer to section 5 and 8. SterlingOSB Material Safety Data Sheet Norbord Europe Ltd Morayhill, Inverness Highland, IV2 7JQ Scotland UK Phone: +44 (0) 1463 795100 www.norbord.co.uk 11. Toxicological Information OSB in panel form is unlikely to give rise to any toxicological effects; however health risks may arise from dust and moulds associated with poor processing, handling or storage practices. a. Immediate Hazards INHALATION: Dust generated during processing may cause irritation of the nose and throat. SKIN: Dust generated during processing may cause irritation. EYES: Dust generated during processing may cause irritation. Under COSHH Regulations, softwood dust has a Workplace Exposure Limit (WEL) of 5 mg/m3 (8 hr TWA) - this is the relevant limit for controlling exposure to OSB dust. Exposure must be reduced as far as is reasonably practicable below this limit - usually with properly designed and maintained extraction equipment fitted to woodworking machines. When using portable or hand-held tools, extraction equipment often is not practicable or available, in which case a suitable dust mask should be worn. If possible OSB should be machined in a well-ventilated workplace, for example outside. Softwood dust has also been classified as a potential sensitizer. Formaldehyde has a WEL of 2.5 mg/m3 (8 hour TWA) and a Short Term Exposure Limit (STEL) also 2.5 mg/m3 (15 minute exposure).Formaldehyde vapour can irritate the eyes and nasal linings. Formaldehyde class for OSB is class E1 - less than or equal to 8 mg/100g (0.008 %) of board as per BS EN 13986:2004 Annex B. b. Delayed Hazards Skin eczema can take up to 15 weeks to develop for persons susceptible to dust irritation. 12. Ecological Information Mobility: The dust from processing is highly mobile especially when airborne. Degradability: Biodegradable as for wood. Bio accumulative potential: Not determined. Aquatic toxicity: Toxicity to bacteria, algae and higher marine organisms not tested. 13. Disposal Considerations The option of recycling any residues should be considered. Special consideration should be given to containing dust to prevent spillage during transit SterlingOSB Material Safety Data Sheet Norbord Europe Ltd Morayhill, Inverness Highland, IV2 7JQ Scotland UK Phone: +44 (0) 1463 795100 www.norbord.co.uk 14. Transport Information UK Supply Classification: UK Carriage Classification: UK Conveyance Classification: UN Number: Non-classifiable. Non-classifiable. Non-classifiable. None. 15. Regulatory Information Label Information: UK Supply Classification: UN Number: Other Regulations: Non-classifiable None. This Material Safety Data has been compiled in accordance with:- "Classification, Labelling and Packaging (CLP) regulations 2009" Transport, storage, use and disposal of the material should be in accordance with the following additional legislation/publications, where applicable: COSHH Regulations 1994 and Amendments; Environmental Protection Act 1990; Environmental Protection (Duty of Care) Regulations 1992; EH40 Workplace Exposure Limits Note: This list may not be exhaustive and users should satisfy themselves that they comply with all the relevant and latest issue national legislation. 16. Other Information None. Further technical information can be obtained from Norbord Europe Ltd. Station Road Cowie Stirling Scotland FK7 7BQ Phone: 01786 812921 Fax: 01786 817143 www.norbord.co.uk