Pipe hangers and supports catalog
File info: application/pdf · 356 pages · 22.32MB
Pipe hangers and supports catalog
CA310001EN, 2020 version, Created 11/19
CA310001EN, 2020, version, Created, 11/19
Extracted Text
Pipe Hangers PH-20 Pipe hangers & supports We make what matters work.* At Eaton, we believe that power is a fundamental part of just about everything people do. That's why we're dedicated to helping our customers find new ways to manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. To improve people's lives, the communities where we live and work, and the planet our future generations depend upon. Because this what really matters. And we're here to make sure it works. To learn more go to: Eaton.com/whatmatters We make what matters work. * Table of Contents Introduction ....................................................................................................................................................................................... 3 Pictorial Index ....................................................................................................................................................................... 5 - 17 Strut Systems Information .................................................................................................................................... 18 - 19 Technical Data Materials & Corrosion ............................................................................................................................................................ 20 Finishes & General Information ........................................................................................................................... 20 - 21 Recommended Specifications .............................................................................................................................. 22 - 27 Beam Clamps C-Clamps .............................................................................................................................................................................. 29 - 32 Reversible Beam Clamps ......................................................................................................................................... 33 - 34 Reversible Stainless Steel Beam Clamps .............................................................................................................. 35 Bottom Beam Clamps ................................................................................................................................................ 36 - 43 Retaining Straps .............................................................................................................................................................. 37 - 39 Bottom Beam Clamps ................................................................................................................................................ 40 - 43 Top Beam Clamps .................................................................................................................................................................... 44 Side Beam Clamps .................................................................................................................................................................. 44 Bar Joist Hanger ........................................................................................................................................................................ 45 Trus Joist Beam Clamps ..................................................................................................................................................... 46 Pipe Hangers Clevis Pipe Spacer .................................................................................................................................................................... 49 Clevis Hangers ................................................................................................................................................................. 50 - 59 `J' Hangers ..................................................................................................................................................................................... 55 Band Hangers ................................................................................................................................................................... 60 - 62 Split Clamps & Hangers, Rings .................................................................................................................. 63 - 65, 71 Wall Mount Lay-In Hangers .............................................................................................................................................. 66 Retrofit Wrap Around `U' Hanger Clamp ................................................................................................................ 67 Wire Hangers .................................................................................................................................................................... 68 - 69 Spring Hangers ........................................................................................................................................................................... 70 Pipe Clamps Risers ...................................................................................................................................................................................... 73 - 74 Underground Clamps .................................................................................................................................................. 75 - 76 Pipe Clamps ....................................................................................................................................................................... 77 - 87 Pipe Straps .......................................................................................................................................................................... 88 - 91 VibraClampTM ..................................................................................................................................................................... 92 - 93 ArmafixTM Inserts, Clamps & Isolation Tape ......................................................................................................... 94 Vibra CushionTM .......................................................................................................................................................................... 95 ISO-TapeTM ..................................................................................................................................................................................... 95 CPVC Hangers ............................................................................................................................................................... 96 - 105 Plastic KWIK-CLIPTM ............................................................................................................................................... 106 - 107 Pipe Rollers & Roller Supports Roller Hangers ............................................................................................................................................................ 109 - 110 Roller Supports .......................................................................................................................................................... 111 - 119 Roller Stands ................................................................................................................................................................ 120 - 122 Spring Cushion Roller Hanger ...................................................................................................................................... 123 Rollers ............................................................................................................................................................................... 124 - 125 B-Line series Pipe Hangers & Supports 1 Eaton Table of Contents Pipe Supports, Guides, Shields & Saddles Calcium Silicate Shields .................................................................................................................................................... 127 Stands & Supports .................................................................................................................................................. 128 - 142 Isolators, Guides & Anchors ............................................................................................................................ 143 - 149 Pipe Slides ..................................................................................................................................................................... 150 - 157 Pipe Saddles ................................................................................................................................................................ 158 - 163 Pipe Shields .................................................................................................................................................................. 164 - 167 Snap `N ShieldTM - Strut Mounted Style ................................................................................................. 168 - 169 Snap `N ShieldTM - Clevis & Band Hanger Style ................................................................................ 170 - 171 TOLCOTM Seismic Bracing Sway Bracing Pipe Clamps ............................................................................................................................... 173 - 178 Sway Bracing Attachments .............................................................................................................................. 179 - 192 Mechanical Fast Clamps .................................................................................................................................................. 193 Pre-Stretched Aircraft Cable .......................................................................................................................................... 194 Cable Sway Brace Attachments ................................................................................................................... 195 - 196 Sway Brace Main Pipe Attachments ........................................................................................................ 197 - 202 Miscellaneous Brace Attachments ............................................................................................................. 203 - 207 Concrete Inserts Concrete Deck Inserts ......................................................................................................................................... 209 - 211 Spot Inserts & Insert Nuts .................................................................................................................... 209, 212 - 215 Continuous Concrete Inserts .......................................................................................................................... 216 - 218 Anchor Clips ............................................................................................................................................................................... 219 Brackets Light Duty ...................................................................................................................................................................... 221 - 223 Medium Duty ............................................................................................................................................................................ 224 Heavy Duty ................................................................................................................................................................................. 225 Brackets w/ U-Bolts ............................................................................................................................................................. 226 Upper Attachments Ceiling Flange ............................................................................................................................................................................ 229 Angle Supports .......................................................................................................................................................... 230 - 233 Swivel Attachment ................................................................................................................................................................ 234 Bolted & Welded ...................................................................................................................................................... 235 - 237 Concrete Plates ......................................................................................................................................................... 238 - 240 Rod Beam Attachments ................................................................................................................................................... 241 Threaded Accessories Eye Sockets & Nuts ............................................................................................................................................... 243 - 244 U-Bolts .............................................................................................................................................................................. 245 - 247 Miscellaneous Accessories .............................................................................................................................. 248 - 250 Rods, Couplings, Washers & Hardware ................................................................................................. 251 - 261 Toggle Bolts & Wedge Anchors ................................................................................................................................. 262 Eaton 2 B-Line series Pipe Hangers & Supports Table of Contents Vibration Isolation Vibration Pads ............................................................................................................................................................. 267 - 270 Vibra StripTM ................................................................................................................................................................................. 271 Neoprene Mounts ................................................................................................................................................................. 272 Steel Spring Isolator Restraints ..................................................................................................................... 273 - 277 Neoprene Isolator Restraints .......................................................................................................................... 278 - 279 Neoprene Mounts with Integrak Seismic Restraints .................................................................... 280 - 281 Neoprene Hangers ................................................................................................................................................................ 282 Spring Hanger with Seismic Cushion Stops ........................................................................................ 283 - 286 Spring & Neoprene Hanger with Seismic Cushion Stops ......................................................... 287 - 290 DURA-BLOKTM Rooftop Supports Base ................................................................................................................................................................................................. 293 Base & Channel ......................................................................................................................................................... 294 - 296 Base & Hinged Clamp Riser .......................................................................................................................................... 297 Base & Harness ........................................................................................................................................................ 298 - 299 Base & Rollers ............................................................................................................................................................ 300 - 301 Base Stand .................................................................................................................................................................................. 301 Load Distribution Plate ....................................................................................................................................................... 302 KwikWireTM System Clamps ........................................................................................................................................................................................... 307 Wire Rope .................................................................................................................................................................................... 307 KwikPakTM Kits .......................................................................................................................................................................... 308 Cable Cutter ............................................................................................................................................................................... 308 KwikWire Hangers ................................................................................................................................................................ 309 Accessories (Loop, Hook, Bracket Termination) .............................................................................. 310 - 315 Reference Data Anchor Load Chart Information ................................................................................................................................... 316 Metric Conversions .............................................................................................................................................................. 317 Decimals & Fractions .......................................................................................................................................................... 318 Miscellaneous Charts � Piping, Tubing, Threaded Rod, etc. ................................................... 319 - 326 Threaded Rod Charts .......................................................................................................................................................... 327 Miscellaneous Chart � Wide Flange I-Beams ..................................................................................... 328 - 329 Miscellaneous Charts � `S' Shape I-Beams ....................................................................................................... 330 Miscellaneous Charts � `C' Shape I-Beams ....................................................................................................... 331 Trapeze Hanger Chart ........................................................................................................................................... 332 - 333 MSS & Federal Specifications to � B-Line series Cross References ............................... 334 - 335 B-Line series Compliances & Approvals ................................................................................................. 336 - 337 Cross References B-Line series to TOLCO ................................................................................................................................. 338 - 339 TOLCO to B-Line series ................................................................................................................................. 340 - 341 Anvil/Grinnell to B-Line series/TOLCO .............................................................................................................. 342 Erico to B-Line series/TOLCO .................................................................................................................................. 343 PHD to B-Line series/TOLCO .................................................................................................................................. 344 Super Strut to B-Line series/TOLCO .................................................................................................................. 345 C & P* to B-Line series/TOLCO ............................................................................................................................ 346 Empire to B-Line series/TOLCO ............................................................................................................................ 347 Index ........................................................................................................................ 348 - 351 * C & P is Carpenter & Paterson B-Line series Pipe Hangers & Supports 3 Eaton Introduction Eaton is a leading manufacturer and fabricator of B-Line series metal products used in the support of pipe and equipment for industrial, residential, commercial, utility, and OEM installations. Eaton is proud of the exacting standards of research, design, engineering, and manufacturing that go into each and every product that comprise our pipe hanger product line. Our customers have access to one of the most complete support systems offered in the industry, including pipe hangers, strut system, cable tray, slotted angle, seismic bracing, fasteners, communications, enclosures and anchors. Many of Eaton B-Line series products are listed by Underwriters' Laboratories, Inc. and FM Global approved for fire sprinkler system installations. All Eaton B-Line series products are manufactured to meet or exceed industry standards. Eaton B-Line series products are produced in plants consisting of over 1,000,000 square feet. These facilities are located in Highland, Illinois; Troy, Illinois; Reno, Nevada; and Sherman, Texas. Regional sales and distribution centers are located throughout the United States and stock standard B-Line series products for quick service and delivery. This catalog is designed to help engineers and contractors in the application and selection of pipe hangers, supports and seismic bracing for construction and maintenance. If a unique application requires a special product not included in this catalog, Eaton engineering personnel are ready to furnish design consultation and material estimates. In addition, engineering sales representatives are located throughout the United States and abroad for your convenience. WARNING All hanger products in this catalog should be installed and serviced only as illustrated or described. Do not use them for any purpose other than those described in this catalog. Products that are used for unintended purposes could fail, resulting in severe personal injury or death. Examples of misapplications which could cause severe personal injury or death include, but are not limited to: � Using a beam clamp on a beam other than those described in the catalog; � Using concrete inserts as anchors for pulling pipe up to the required elevation; � Suspending clevis hangers, one under another, which could result in an accumulative load that is greater than that which the pipe hanger will support. Eaton B-Line series pipe hanger and support products are manufactured in accordance with industry standards. Our customers should exercise care in using these products properly as to avoid potential damage or injury. Contact us if you have any questions about proper installation and use of the products in this catalog. NOTICE Eaton reserves the right to change the specifications, materials, equipment, prices or the availability of products at any time without prior notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time of publication, Eaton is not responsible for inaccuracies resulting from undetected errors or omissions. SINCE 1924 Manufacturers Standardization Society of the Valve and Fitting Industry, Inc. ISO 9001:2008 B-Line Division 509 West Monroe Street Highland, Illinois 62249-0326 Phone: 800-851-7415 Eaton 4 www.eaton.com/pipehangers B-Line series Pipe Hangers & Supports Beam Clamps Pictorial Index Pictorial Index B351L Steel C-Clamp With Locknut Page 29 B3036L Malleable Iron C-Clamp With Locknut Page 29 B3362 thru B3365 Retaining Strap Page 30 B3037 Z-Purlin Beam Clamp Page 30 B3031-3/8 Light Duty Malleable C-Clamp Page 31 B3033 Wide Jaw Top Flange C-Clamp Page 31 B303-B309 Beam Clamp Page 36 B3034 Top Flange C-Clamp Page 32 Fig. 65 Reversible Steel C-Clamp With Locknut 3/4" Throat Page 33 Fig. 65XT-3/8 Reversible Steel C-Clamp With Locknut 3/4" Throat Page 33 Fig. 66 Reversible Steel C-Clamp With Locknut 11/4" Throat Page 34 B321 Series Beam Clamp Page 36 Fig. 69 Retaining Strap Page 37 Fig. 69R Retrofit Retaining Strap Page 38 Fig. 67SS (3/4" Throat) Fig. 68SS (11/4" Throat) Reversible Stainless Steel C-Clamp With Locknut Page 35 B3040 Adjustable Beam Clamp Page 39 B312 Retaining Strap Page 39 B3050 Beam Clamp Page 40 B3055 Steel Beam Clamp Page 41 B3054 Malleable Iron Beam Clamp Page 42 B3291 thru B3298 UFS Forged Steel Beam Clamp Page 43 B3042 Top Beam Clamp Page 44 B3045 Side Beam Clamp Page 44 B-Line series Pipe Hangers & Supports 5 B3042T Bar Joist Hanger Page 45 Fig. 130 Trus Joist Beam Clamp Page 46 Eaton Pictorial Index Pipe Hangers Pictorial Index Fig. 1CBS Clevis Pipe Spacer Page 49 B3100 Standard Clevis Hanger Pages 50 & 51 X B3100C Plastic Coated Standard Clevis Hanger Page 52 B3100F Felt Lined Standard Clevis Hanger Page 52 B3102 AWWA Clevis Hanger Page 53 B3108 Extended Clevis Hanger Page 54 B3690 Adjustable 'J' Hanger Page 55 B3690F Felt Lined Adjustable 'J' Hanger Page 55 B3690C Plastic Coated Adjustable 'J' Hanger Page 55 B3109 Flat Top Clevis Hanger Page 56 B3106 Vee Bottom Clevis Hanger Page 57 B3106V Plastic Pipe Support Channel Page 57 B3104 Light Duty Clevis Hanger Page 58 X B3104F Felt Lined Light Duty Clevis Hanger Page 58 B3104C Plastic Coated Light Duty Clevis Hanger Page 58 B3104CT Copper Tubing Light Duty Clevis Hanger u Page 59 B3104CTC Plastic Coated Copper Tubing Light Duty Clevis Hanger u Page 59 B3170CT Copper Tubing Adjustable Swivel Ring Page 60 u u DURA-COPPERTM Finish B3170CTC Copper Tubing Plastic Coated Adjustable Swivel Ring Page 60 u X Available in DURA GREENTM Finish (Other hangers may be available with the DURA-GREEN finish, contact factory) Eaton 6 B-Line series Pipe Hangers & Supports Pictorial Index Pipe Hangers (Continued) Fig. 200 Trimline Adjustable Band Hanger Page 61 Fig. 200 H Heavy Duty Band Hanger Page 62 Fig. 200F Felt Lined Trimline Adjustable Band Hanger Page 61 Fig. 200C Plastic Coated Trimline Adjustable Band Hanger Page 61 B3198H Hinged Extension Split Pipe Clamp Page 63 B3198HCT Copper Tubing Hinged Extension Split Pipe Clamp Page 64 u Pictorial Index B3198R Extension Split Pipe Clamp Page 63 B3198RCT Copper Tubing Extension Split Pipe Clamp Page 64 u B3175 Ring and Bolt Hanger Page 65 B3175CT Copper Tubing Ring and Bolt Hanger Page 65 u B3190 Offset 'J' Hook Page 66 B3191 Straight 'J' Hook Page 66 Fig. 120RWA Retrofit Wrap Around "U" Hanger Clamp Page 67 Fig. 120 `U' Hanger Page 68 Fig. 120MJ Mutt & Jeff `U' Hanger Page 69 Fig. 120W Wrap Around `U' Hanger Page 69 BH-2-4 BH-5-8 BH-9-12 Parallel Strap Hanger Page 71 B-Line series Pipe Hangers & Supports BH-2-4-R BH-5-8-R BH-9-12-R Right Angle Strap Hanger Page 71 u DURA-COPPERTM Finish 7 B3262 Light Duty Spring Hanger Page 70 BL1400 thru BL1490 Hanger Page 71 Eaton Pictorial Index Pictorial Index Pipe Clamps B3373 Standard Riser Clamp Page 73 B3373C Plastic Coated Standard Riser Clamp Page 73 B3373F Felt Lined Standard Riser Clamp Page 73 B3373CT Copper Tubing Riser Clamp Page 74 u B3373CTC Copper Tubing Plastic Coated Riser Clamp Page 74 u B3132 Two-Bolt Underground Clamp Page 75 B3134 Four-Bolt Underground Clamp Page 76 Fig. 4A Pipe Clamp for Sway Bracing Page 77 B3140 Standard Pipe Clamp Pages 78 & 79 B3140C Plastic Coated Standard Pipe Clamp Pages 78 & 79 B3132W Lug Washer Page 75 B3134W Washer Page 76 B3140F Felt Lined Standard Pipe Clamp Pages 78 & 79 B3141 A.W.W.A. Pipe Clamp Page 80 B3142 Heavy Duty Pipe Clamp Page 81 B3144 Double Bolt Pipe Clamp Pages 82 & 83 B3146 Heavy Duty Double Bolt Pipe Clamp Page 84 Fig. 4B Pipe Clamp For Sway Bracing Page 85 B3148 Offset Pipe Clamp Page 86 B2400 Standard Pipe Strap B3180 Pages 90 & 91 Extended Leg Pipe Strap Page 89 u DURA-COPPERTM Finish B3149 Marine Hanger Page 87 B3180FL Flush Mount Pipe Strap Page 88 BVT VibraClamp Tubing Sizes Page 92 BVP VibraClamp Pipe Sizes Page 93 IPH Series ArmafixTM Inserts & Insulation Tape Page 94 Eaton 8 B-Line series Pipe Hangers & Supports Pictorial Index Pipe Clamps (Continued) Pictorial Index B1999 Vibra Cushion Page 95 ISO ISO-PIPETM Page 95 Fig. 22 Single Fastener CPVC Strap Page 96 Fig. 22L2 One Hole Hanger/Restraint For CPVC & Steel Pipe Page 97 Fig. 23 Double Fastener CPVC Strap Page 98 Fig. 24 Double Fastener Side Mounted CPVC Strap Page 99 Fig. 25 Surge Restrainer Page 100 Fig. 27 Speed Nut Page 101 Fig. 28 Stand-Off Hanger & Restrainer for CPVC Pipe Page 102 Fig. 28M Offset Hanger & Restrainer for CPVC & IPS Pipe Page 103 Fig. 29 Double Offset Hanger & Restrainer for CPVC Pipe Page 104 B3184 Light Duty Offset Hanger & Restrainer for CPVC & IPS Pipe Page 105 BPRC Series Rod Mount KWIK-CLIP Page 106 Pipe Rollers & Roller Supports BPIC Series BPSC Series Channel Mount KWIK-CLIP Page 107 B3110 Adjustable Steel Yoke Pipe Roll Page 109 X B3114 Pipe Roll With Sockets Page 110 B3122 Adjustable Roller Support Page 111 X Available in DURA GREENTM Finish B3122A Adjustable Double Roller Guide Page 112 B-Line series Pipe Hangers & Supports 9 Eaton Pictorial Index Pictorial Index Pipe Rollers & Roller Supports (Continued) B3120 Roller Chair Page 113 B3124 Roller Support Page 114 B3126 Roller Support Page 115 B218 Pipe Rollers Page 116 B219 Pipe Rollers Page 117 B379 Pipe Rollers Page 118 B479 Pipe Rollers Page 119 B3117SL Steel Roller Stand Page 120 B3118SL Adjustable Roller Stand With Base Plate Page 121 B3119SL Roller With Steel Base Plate Page 122 B3264 Spring Cushion Hanger Page 123 B3114R Long Pipe Roll Only Page 124 B3117R Short Pipe Roll Only Page 125 Pipe Supports, Guides, Shields & Saddles B3380 thru B3384 360� Calcium Silicate Shield Page 127 B3088 Base Stand B3088S Seismic Base Stand Pages 128 & 129 B3088T Threaded Base Stand B3088ST Seismic Threaded Base Stand Pages 128 & 129 B3096 Adjustable Pipe Saddle Support Page 130 B3089 Pipe Support Adjuster Page 131 B3090 Pipe Saddle Support With U-Bolt Pages 132 & 133 B3095 Pipe Saddle Support Pages 134 & 135 B3092 Adjustable Pipe Saddle Support With Yoke Pages 136 & 137 B3093 Adjustable Pipe Saddle Support Pages 138 & 139 B3097 Pipe Saddle With Strap Page 140 B3098 Adjustable Pipe Support w/U-Bolt Page 141 B3094 Flange Support Page 142 Eaton 10 B-Line series Pipe Hangers & Supports Pictorial Index Pictorial Index Pipe Supports, Guides, Shields & Saddles (Continued) B3195 I.P.S. Isolator B3195CT Copper Tubing Isolator Page 143 B3281 thru B3287 Pipe Alignment Guide Pages 144 & 145 B2417 Pipe Guides Page 146 B3147A B3147B Anchor Chairs Pages 146 & 147 B3160 thru B3165 Pipe Covering Protection Saddle Pages 158 - 163 B3256 Hold-Down Anchor Clamp Page 148 B3257 Base Plate Page 149 B3891 thru B3897 Pipe Slides Pages 150 - 153 BPS Series Snap N'Shield For Strut Channel Pages 168 & 169 TOLCOTM Seismic Bracing B3991 thru B3993 Pipe Slides Pages 154 - 157 B3151 Insulation Protection Shield Page 166 B3153 Insulation Protection Shield With Tabs Page 166 BPCH Series Snap N'Shield For Clevis & Band Hangers Pages 170 & 171 B3154 Short Insulation Protection Shield Page 167 B3155 Short Insulation Protection Shield With Tabs Page 167 Fig. 4A Pipe Clamp For Sway Bracing Page 173 Fig. 4B Pipe Clamp For Fig. 4L Longitudinal "In-Line" Fig. 4LA Sway Brace Longitudinal "In-Line" Sway Bracing Page 178 Attachment Sway Brace Pages 174 & 175 Attachment Pages 176 & 177 Fig. 906 Sway Brace MultiFastener Adaptor Page 179 Fig. 800 Adjustable Sway Brace Attachment To Steel Pages 180 & 181 Fig. 828 Universal Sway Brace Attachment Pages 182 & 183 Fig. 825 Bar Joist Sway Brace Attachment Pages 184 & 185 B-Line series Pipe Hangers & Supports Fig. 825A Bar Joist Sway Brace Attachment Page 186 11 Fig. 909 No-Thread Swivel Sway Brace Attachment Page 187 Fig. 910 Swivel Sway Brace Attachment Page 188 Eaton Pictorial Index Pictorial Index TOLCOTM Seismic Bracing (Continued) Fig. 907 4-Way Longitudinal Sway Brace Attachment Page 189 Fig. 975 Straight Sway Brace Fitting Page 190 Fig. 981 Fast-Attach Universal Swivel Sway Brace Attachment Page 191 Fig. 980 Universal Swivel Sway Brace Attachment Page 192 Fig. BRC CABLE Pre-Stretched Aircraft Cable Page 194 Fig. 985 Mechanical Fast Clamp Page 193 Fig. 986 Mechanical Fast Clamp Page 193 Fig. 990 Cable Sway Brace Attachment Page 195 Fig. 991 Fast Attach Cable Sway Brace Attachment Page 196 Fig. 3000 CPVC Sway Brace Attachment Page 197 Fig. 1001 Sway Brace Attachment Pages 198 & 199 Fig. 1000 Fast Clamp Sway Brace Attachment Pages 200 & 201 Fig. 2002 Sway Brace Attachment Page 202 B335 Three Hole Adjustable Hinge Page 203 Concrete Inserts B650 Seismic Retrofit Bracket Page 203 Fig. 76 Structural Attachment for Sway Brace Assembly Pages 204 & 205 Fig. 77 Sysrem Piping Attachment for Restraint Assembly Pages 206 & 207 B3019 Adjustable Metal Deck Ceiling Bolt Page 209 B2499 Heavy Duty Spot Insert Page 209 Fig. 109DD Concrete Deck Insert Pages 210 & 211 B2500 Light Duty Spot Insert Page 212 N2500 Steel Insert Nut Page 212 Eaton 12 B-Line series Pipe Hangers & Supports Pictorial Index Concrete Inserts (Continued) B3014 Malleable Iron Spot Insert Page 213 B3014N Malleable Iron Insert Nut Page 213 Pictorial Index B2501 Light Duty Spot Insert Pages 214 B2505 thru B2508 Spot Insert Page 214 B2503 Heavy Duty Spot Insert Page 215 BRACKETS B22I, B32I, B52I Continuous Concrete Inserts Pages 216 - 218 BD40 Fastener Clip Page 219 BE-5-8 BE-9-12 Fastener Clip Page 219 B3068 Light Duty Welded Bracket Page 221 B3064 Adjustable Strut Bracket Page 222 B3067 Heavy Duty Welded Bracket Page 225 B3069W Welded Knee Brace Page 226 Upper Attachments B3065 Light Duty Welded Bracket Page 223 B3069E "O" Bracket Page 226 B3066 Medium Duty Welded Bracket Page 224 B3199 Ceiling Flange Page 229 B3199CT Dura-Copper Coated Ceiling Flange Page 229 u Fig. 78 All Steel Ceiling Plate Page 229 B3060L Side Beam Angle Clip Page 230 B3070 Reversible Angle Clip Page 230 B3060 Side Beam Angle Clip Page 231 Fig. 51NFPA Side Beam Bracket for NFPA Rod Page 231 Fig. 50 Side Beam Bracket For NFPA Rod & Fastener Sizing Page 232 B-Line series Pipe Hangers & Supports u DURA-COPPERTM Finish 13 B3061 Angle Bracket Page 232 Eaton Pictorial Index Pictorial Index Upper Attachments (Continued) Fig. 56 Tapped Side Beam Connector Page 232 Fig. 58 Threaded Side Beam Bracket Page 233 Fig. 75 Swivel Attachment Page 234 B3058 Side Beam Connector Page 235 B3062 Side Beam Bracket Page 235 B3083 B3083WO Welded Beam Attachment Page 236 B3080S (Short) B3080L (Long) Structural Welding Lug Page 237 B3085 Rod Attachment Concrete Plate Page 238 B3086 Clevis Concrete Plate Page 239 Threaded Accessories B3084 Single Lug Concrete Plate Page 240 B3082 Rod Beam Attachment Page 241 B3222 Eye Socket Page 243 B3200 Weldless Eye Nut Page 244 B501 Light Weight U-Bolt Page 245 B3188 Standard U-Bolt Pages 246 & 247 B3188C Plastic Coated Standard U-Bolt Pages 246 & 247 B3201 Forged Steel Clevis Page 248 Eaton B3203 Extension Piece Page 249 B3223 Offset Eye Socket Page 249 B3224 Hanger Adjuster B3224CT Dura-Copper Coated Hanger Adjuster Page 250 u u DURA-COPPERTM Finish B3202 Turnbuckle Page 250 14 B-Line series Pipe Hangers & Supports Threaded Accessories (Continued) Pictorial Index Pictorial Index B3205 Machine Threaded Rod Page 251 ATR All Threaded Rod Page 251 B3214 Tie Bolt Page 253 Fig. 98 Rod Stiffener Page 252 Fig. 98B Rod Stiffener with Break Off Bolt Head Page 252 SC228 Rod Stiffener Page 252 B3210 Eye Rod Page 254 B3211 Welded Eye Rod 254 B3210X Linked Eye Rod Page 255 B3211X Linked Welded Eye Rod Page 255 B3213 Coach Screw Rod Page 253 B3212 J-Bolt Page 256 B3228 Hex Head Lag Bolt Page 256 DS 16 x 2 #16 x 2" Drive Screw Page 256 B655 Steel Rod Coupling B656 Steel Reducer Rod Coupling Page 257 B3220 Malleable Iron Rod Coupling Page 258 B200 Square Washer Page 258 B3248 Steel Washer Plate Page 259 B3234 Bevel Washer Page 259 HN - Hex Nut HHN - Heavy Hex Nut Page 260 FW Flat Washer Page 261 LW Lock Washer Page 261 FFW Flat Fender Washer Page 261 ATB Toggle Bolt Page 262 AWA Wedge Anchor Page 262 B-Line series Pipe Hangers & Supports 15 Eaton Pictorial Index Pictorial Index VIBRATION ISOLATION NNP Ribbed Neoprene Pad Page 267 CNP Cork and Ribbed Neoprene Pad Page 268 CNNK Cork, Ribbed Neoprene and Steel Page 269 VRP Rubber Cube Pad Page 270 BVS Type 15/8" Wide Vibra StripTM Page 271 RM & RM-D Type Neoprene Mounts Page 272 OS Type Steel Spring Isolator Restraints 1", 2", & 3" Deflection Pages 273 & 274 JQ Type Isolator Restraints w/OPA-0070 Pre-Approved Seismic Protection 1", 2", & 3" Deflection Pages 275 & 277 JQ-TQN Type Neoprene Isolator Restraints w/OPA-0070 Pre-Approved Seismic Protection 1/2" Deflection Pages 278 & 279 RQ & RQD Type Neoprene Mount w/Integrak Seismic Restraints 1/4" & 1/2" Deflection Pages 280 & 281 RH & RHD Type Neoprene Hanger 1/4" & 1/2" Deflection Page 282 CHSCS Type Spring Hanger w/Seismic Cushion Stop 1" & 2" Deflection Pages 283 & 284 HHSCS Type Combination Hanger Spring & Neoprene w/ Seismic Cushion Stop 11/2" & 21/2" Deflection Pages 287 & 288 Eaton CH30SCS Type Deflection Combination Hanger 15� Tilt Spring & Neoprene w/ Seismic Cushion Stop 1" & 2" Deflection Pages 285 & 286 16 HH30SCS Type Deflection Combination Hanger 15� Tilt Spring & Neoprene w/ Seismic Cushion Stop 11/2" & 21/2" Deflection Pages 289 & 290 B-Line series Pipe Hangers & Supports Pictorial Index DURA-BLOKTM Rooftop Supports Pictorial Index DBP Base Page 293 DBM Base Page 293 DB Series Base & Short Channel Page 294 DB6 Series Base & Tall Channel Page 295 DBM Series Base & Clamp Riser Page 297 DB__DS Series Bases & Harness Assembly Pages 298 & 299 DBR Series Base & Adjustable Height Roller Assembly Page 301 KwikWireTM System DBE Series Base & Adjustable Height Channel Page 301 DB10 Series Double Base & Long Channel Page 296 DBR Series Base & Fixed Height Roller Assembly Page 300 CLDP10 Load Distribution Plate Page 302 KwikWire Clamp Page 307 Wire Rope Page 307 KwikPakTM Kit Page 308 Wire Rope Cutter Page 308 KwikWire Hanger Page 309 BKL & BKLK Series Loop Termination Page 311 BKH & BKHK Series Single Hook Termination Page 312 BKYH & BKYHK Series Double Hook Termination Page 313 BKB & BKBK Series Bolt Termination Page 314 B-Line series Pipe Hangers & Supports 17 BKA & BKAK Series Angle Bracket Termination Page 315 Eaton Strut Systems The B-Line series metal framing support system is designed with many time-saving features. Fully adjustable and reusable, with a complete line of channels, fittings, and accessories for multi-purpose applications. Strut Systems Information SELECTION CHART for Channels, Materials and Hole Patterns Channel Dimensions Channel Height Width Material & Thickness Stainless Steel SH Steel 1 Alum. 2 Type 304 3 Type 316 4 B11 31/4" (82.5) 15/8" (41.3) 12 Ga. -- -- -- 1 B12 27/16" (61.9) 15/8" (41.3) 12 Ga. .105 -- -- 12 B22 15/8" (41.3) 15/8" (41.3) 12 Ga. .105 12 Ga. 12 Ga. 1 2 3 4 B24 15/8" (41.3) 15/8" (41.3) 14 Ga. .080 14 Ga. 14 Ga. 1 2 3 4 B26 15/8" (41.3) 15/8" (41.3) 16 Ga. -- -- -- 1 B32 13/8" (34.9) 15/8" (41.3) 12 Ga. -- 12 Ga. -- 13 B42 1" (25.4) 15/8" (41.3) 12 Ga. -- 12 Ga. -- 13 B52 13/16" (20.6) 15/8" (41.3) 12 Ga. -- -- -- 1 B54 13/16" (20.6) 15/8" (41.3) 14 Ga. .080 14 Ga. 14 Ga. 1 2 3 4 B56 13/16" (20.6) 15/8" (41.3) 16 Ga. -- -- -- 1 Channel Hole Pattern S H17/8 TH 1 1 -- 1 12 -- 1 1234 1 1 1234 -- 1 1 -- 1 13 -- 1 13 -- 1 1 -- 1 1234 -- 1 1 -- KO6 1 12 12 12 1 1 1 1 12 1 Channel Nuts Size and Part Number Thread With Without Twirl Size Spring Spring Nut 1/4"-20 N224 N224WO TN224 3/8"-16 N228 N228WO TN228 1/2"-13 N225 N225WO TN225 5/8"-11 N255 N255WO -3/4"-10 N275 N275WO -- Available Finishes: Electro-Galvanized Combo Nut Washers Part Number NW524 NW528 NW525 Thread Size 1/4"-20 3/8"-16 1/2"-13 Available Finishes: Electro-Galvanized B2000 Series Schedule 40 Pipe Clamps Copper Tubing Clamps DURA-COPPERTM Part No. B2026DCU B2008DCU B2030DCU B2032DCU B2011DCU B2038DCU B2042DCU B2046DCU B2050DCU B2054DCU Nominal Tubing Size 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (60) 3" (80) 31/2" (90) 4" (100) Mat'l Ga. 16 16 14 14 14 12 12 12 12 11 Part No. B2001 B2008 B2009 B2010 B2011 B2012 B2013 B2014 B2015 B2016 B2017 B2018 B2019 B2020 B2021 B2022 Nomina l Pipe Size 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (60) 3" (80) 31/2" (90) 4" (100) 41/2" (115) 5" (125) 6" (150) 7" (175) 8" (200) Available Finishes: Electro-Galvanized, Aluminum, Stainless, DURA-COPPER Painted, Hot-Dip Galvanized and PVC coated. Nut and bolts are included with all two-piece clamps. ** Add "PA" to Part No. for Pre-assembled Mat'l Ga. 16 16 14 14 14 12 12 12 12 11 11 11 11 11 11 11 Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 18 B-Line series Pipe Hangers & Supports Strut Systems Information Strut Systems Below are some basic clamp and cushions to be used with a strut system. For the industry's most complete line of strut and strut fittings, refer to B-Line series Strut Systems catalog. B2000 Series 1BBV-1PL/1I25N"0E.I.P BVT & BVP Series Vibra-ClampTM O.D. Pipe Clamps Part No. B2023 B2024 B2025 B2026 B2027 B2028 B2029 B2030 B2031 B2032 B2004 B2011 B2005 B2036 B2037 B2038 B2039 B2013 B2041 B2042 B2043 B2014 B2045 B2046 B2047 B2048 B2015 B2050 B2051 B2016 B2054 B2055 B2056 B2017 B2058 B2059 B2060 B2061 B2062 B2063 B2064 B2065 O.D. Size (Outside Dia.) 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 11/8" 11/4" 13/8" 11/2" 15/8" 13/4" 17/8" 2" 21/8" 21/4" 23/8" 21/2" 25/8" 23/4" 27/8" 3" 31/8" 31/4" 33/8" 31/2" 35/8" 33/4" 4" 41/8" 41/4" 43/8" 41/2" 45/8" 43/4" 47/8" 5" 51/8" 51/4" 53/8" 51/2" (6.3) (9.5) (12.7) (15.9) (19.0) (22.2) (25.4) (28.6) (31.7) (34.9) (38.1) (41.3) (44.4) (47.6) (50.8) (54.0) (57.1) (60.3) (63.5) (66.7) (69.8) (73.0) (76.2) (79.4) (82.5) (85.7) (88.9) (92.1) (95.2) (101.6) (104.8) (107.9) (111.1) (114.3) (117.5) (120.6) (123.8) (127.0) (130.2) (133.3) (136.5) (139.7) Mat'l Ga. 16 16 16 16 16 16 14 14 14 14 14 14 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 For Copper Tubing & OD Sizes Catalog No. BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT412 BVT612 Copper & OD Tubing Size 1/4" (6.3) 3/8" (9.5) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 15/8" (41.3) 13/4" (44.4) 17/8" (47.6) 2" (50.8) 21/8" (54.0) 21/4" (57.1) 21/2" (63.5) 25/8" (66.7) 3" (76.2) 31/8" (79.4) 35/8" (92.1) 41/8" (104.8) 61/8" (155.6) Nominal Copper Size -- -1/4" (6) 3/8" (10) 1/2" (15) 5/8" (17) 3/4" (20) -- -1" (25) -- -11/4" (32) -- -11/2" (40) -- --- --- -2" (50) -- --- -21/2" (65) -- -3" (80) 31/2" (90) 4" (100) 6" (150) Available for tubing and pipe sizes 1/4" to 6", OD sizes 1/4" to 65/8". Easy one tool installation, dampens vibration and noise, secures tubing firmly, and protects against galvanic reaction. Stainless Steel available For Pipe Sizes Catalog No. BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600 Nominal Pipe Size 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" (6) (10) (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) B1999 Vibra-CushionTM � Inhibits Galvanic Reaction � Reduces Sound & Vibration � Used on refrigeration, HVAC, copper tubing, glass pipes & hydraulic lines Available in 20 Ft. rolls. For Rigid Conduit or Iron Pipe Nominal Length of Use Size Vibra-Cushion Clamp No. 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 21/8" 25/8" 31/4" 41/8" 53/16" 515/16" 71/2" 9" 11" 121/2" 141/2" 177/16" 203/4" (54.0) (66.7) (82.5) (104.8) (131.8) (150.8) (190.5) (228.6) (279.4) (317.5) (368.3) (442.9) (527.0) B2002 B2009 B2031 B2004 B2012 B2038 B2042 B2046 B2051 B2055 B2059 B2067 B2116 For Thinwall (EMT) Conduit Nominal Length of Use Size Vibra-Cushion Clamp No. 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 113/16" 23/16" 27/8" 35/8" 43/8" 57/16" 67/8" (46.0) (58.7) (73.0) (92.1) (120.6) (138.1) (174.6) B2027 B2002 B2003 B2032 B2036 B2012 B2013 For Thinwall (EMT) Conduit Nominal Length of Size Vibra-Cushion 1/4" (6) 3/8" (10) 1/2" (15) 5/8" (17) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 13/16" 19/16" 17/8" 25/16" 23/4" 31/2" 45/16" 51/8" 611/16" 81/4" 913/16" 113/8" 1215/16" 61/8" 191/4" 251/2" (30.2) (39.7) (47.6) (58.7) (69.8) (88.9) (109.5) (130.2) (169.9) (209.5) (249.2) (288.9) (328.6) (409.6) (488.9) (647.7) Use Clamp No. B2026 B2027 B2028 B2029 B2030 B2032 B2011 B2036 B2013 B2014 B2048 B2052 B2056 B2064 B2112 B2128 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 19 Eaton Technical Data Technical Data MATERIALS Carbon Steel Carbon steel is used in the manufacture of B-Line series pipe hangers and supports. Excellent strength characteristics and adaptability to cold forming provide a well engineered design. By cold forming the steel, mechanical properties are increased, adding to the structural integrity of the fabricated hanger. Stainless Steel AISI Type 304 and Type 316 are non-magnetic members of the austenitic stainless steel group. Several conditions make the use of stainless steel ideal. These include reducing long term maintenance costs, high ambient temperatures, appearance, and stable structural properties such as yield strength, and high creep resistance. CORROSION All metal surfaces exposed to the environment are affected by corrosion. Depending on the physical properties of the metal and its proximity to other dissimilar metals, an electrochemical reaction may occur which causes an attack on the metal itself, resulting in corrosion. Chemical corrosion is limited to highly corrosive environments, high temperatures, or a combination of both. FINISHES Zinc Coatings Protective zinc coatings are available on a number of pipe hangers and accessories in three basic forms: Electro-galvanized, pre-galvanized, and hot-dip galvanized after fabrication. In all cases, the zinc protects the steel first as a sacrificial anode to repair bare areas on cut edges and gouges. When exposed to air and moisture, zinc forms a tough, adherent protective film consisting of a mixture of zinc oxides, hydroxides, and carbonates. The corrosion resistance of zinc is directly related to its thickness and the environment. For example a 0.2 mil (5 m) coating will last twice as long as a 0.1 mil (2.5 m) coating in the same environment. Electro-Galvanized (ASTM B633 SC1 or SC3) An electro-galvanized process deposits a coating of zinc on the steel by electrolysis from a bath of zinc salts. This coating is pure zinc and adheres to the steel with a molecular bond. A maximum of 0.5 mils (12.7 m) of zinc can be applied by this method. This coating is recommended for in-door use in relatively dry areas. Pre-Galvanized Zinc (ASTM A653 Coating Designation G90) Pre-galvanized zinc is produced by continuously rolling the steel coils or sheets through molten zinc at the steel mills. This is also known as "millgalvanized" or "hot-dipped mill galvanized". Coils are then slit to size for fabrication of pipe hangers. Coating thicknesses of G90, is 0.90 ounces per square foot (0.27 kg/m2) of steel surface. Zn ZnFe Fe ZnO Cut edges and welded areas are not zinc coated; however, zinc near the uncoated metal becomes a sacrificial anode which protects the bare areas after a short period of time. Pre-galvanized steel is not generally recommended for use outdoors in industrial environments, but is suitable for extended exposure in dry or mildly corrosive atmospheres. Hot-Dip Galvanized After Fabrication (ASTM A123) After a pipe hanger or fitting has been fabricated, it is completely immersed in a bath of molten zinc. A metallurgical bond is formed, resulting in a zinc coating that completely coats all surfaces, including edges. Zinc coatings of this specification have a minimum thickness of 1.50 ounces per square foot (0.45 kg/m2) on each side or a total of 3.0 ounces per square foot (0.9 kg/m2) of steel. Hot-dip galvanized after fabrication is recommended for outdoor exposure. For best results, a zinc rich paint (available from Eaton) should be applied to field cuts. The zinc rich paint will provide immediate protection for field cuts and eliminate the short time period for galvanic action to "heal" the damaged coating. Plastic Coating Some products offered by Eaton are plastic or vinyl coated for prevention of galvanic reaction between materials or for noise reduction. These coated products can also be used where contact between glass pipe and hanger is not desirable. Felt lined hangers may be substituted for same purpose. Red Primer A corrosion resistant metal primer containing rust inhibitive pigments. Protection of cut edges with zinc coatings. Eaton 20 B-Line series Pipe Hangers & Supports Technical Data DURA-COPPER and DURA GREEN Epoxy Coatings DURA-COPPERTM and DURA GREENTM are water borne epoxy coatings applied to B-Line series products by a precisely controlled cathodic electro-deposition process. This process is accomplished using a conveyor to transport parts through several cleaning, phosphatizing and application stages prior to being baked (See diagram below). This custom designed paint system is used for painting all copper painted hanger parts and all green channel, slotted angle and fittings. Samples are selected on a routine basis for Salt Spray (fog) testing to verify the quality of the finish. These tests are performed in accordance with ASTM B117-73 and evaluated and rated according to ASTM D1654-79 (Tables 1 & 2). The DURA-COPPER and DURA GREEN Epoxy coatings have been tested and listed by Underwriters Laboratories in accordance with "Standard for Pipe Hanger Equipment for Fire Protection Service, UL 203" and meet or exceed all requirements of Federal Specification TT-C-490B Paragraph 3. Quality Assurance Eaton's Quality Assurance Program has been developed and implemented for compliance to various industry standards and specifications. DURA-COPPER & DURA GREEN EPOXY COATING PROCESS TANK 1 Parts are thoroughly cleaned and phosphatized. TANK 2 Rinse is applied to remove insoluble salts and unreacted phosphates. TANK 3 Phosphatized sealer is applied to insure corrosion resistance and paint adhesion. TANK 4 The material moves through clear water rinse to remove excess phosphates. TANK 5 Deionized rinse prepares the metal for the cathodic electro-coating. TANK 6 The electrocoating tank applies a uniform coat of epoxy paint to the entire surface. TANK 7 The first post rinse removes any unelectrically attracted solids. TANK 8 The final rinse insures a smooth, nonblemish finish. BAKE OVEN The curing process takes 20 minutes at a baking temperature of 375�F (199�C). Technical Data SALT SPRAY TEST RESULTS DURA-COPPER Epoxy Copper Plating DURA-COPPER out performs Copper Plating 4 to 1 (1) All salt spray (fog) tests conducted in accordance with ASTM B117-73 and evaluated and rated according to ASTM D1654-79 Tables 1 & 2. Tests were performed and certified by an independent testing laboratory. Elapsed Time General Information Torque The torque values in this catalog are to be used as a guide only. The relationship between the applied torque or torque wrench reading and the actual tension created in the bolt may be substantially different. Important factors affecting torque-tension relationships include friction under the bolt head or nut, hole tolerances, and torque wrench tolerances. Accuracy of many commercial torque wrenches may vary as much as plus or minus 25%. Charts and Tables Charts and tables in this section are compiled from information published by nationally recognized organizations and are intended for use as a guide only. Eaton recommends that users of this information determine the validity of such information as applied to their own applications. Eaton reserves the right to make specification changes without notice. B-Line series Pipe Hangers & Supports 21 Eaton Technical Data Technical Data SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the pipe hanger and supports as described in this specification. 1.02 REFERENCES A. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel. B. ASTM A123 - Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products. C. ASTM A653 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process. D. ASTM A1011 - Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability. E. ANSI/MSS SP-58 - Manufacturers Standardization Society: Pipe Hangers and Supports Materials, Design, and Manufacture. F. ANSI/MSS SP-69 - Manufacturers Standardization Society: Pipe Hangers and Supports Selection and Application. G. NFPA 13 - Installation of Sprinkler Systems. 1.03 QUALITY ASSURANCE A. Hangers and supports used in fire protection piping systems shall be listed and labeled by Underwriters Laboratories. B. Steel pipe hangers and supports shall have the manufacturers name, part number, and applicable size stamped in the part itself for identification. C. Hangers and supports shall be designed and manufactured in conformance with ANSI/MSS SP-58. D. Supports for sprinkler piping shall be in conformance with NFPA 13. 1.04 SUBMITTALS A. Submit product data on all hanger and support devices, including shields and attachment methods. Product data to include, but not limited to materials, finishes, approvals, load ratings, and dimensional information. Part II - PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS A. Manufacturer: Subject to compliance with these specifications, pipe hanger and support systems shall be as manufactured by Eaton. 2.02 PIPE HANGERS AND SUPPORTS A. Hangers 1. Uninsulated pipes 2 inch and smaller: a. Adjustable steel swivel ring (band type) hanger, B-Line series Fig. 200. b. Adjustable steel swivel J-hanger, B-Line series B3690. c. Malleable iron ring hanger, B-Line series B3198R or hinged ring hanger, B3198H. d. Adjustable steel clevis hanger, B-Line series B3104 or B3100. Eaton 22 B-Line series Pipe Hangers & Supports Technical Data Technical Data 2. Uninsulated pipes 21/2 inch and larger: a. Adjustable steel clevis hanger, B-Line series B3100. b. Pipe roll with sockets, B-Line series B3114. c. Adjustable steel yoke pipe roll, B-Line series B3110. 3. Insulated pipe - Hot or steam piping: a. 2 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metal shield, B-Line series B3100 with B3151 or B3153 series. b. 21/2 inch and larger pipes: i. Adjustable steel yoke pipe roll with pipe covering protection saddle, B-Line series B3110 with B3160 - B3165 series. ii. Pipe roll with sockets with pipe covering protection saddle, B-Line series B3114 with B3160 - B3165 series. 4. Insulated pipe - Cold or chilled water piping: a. 5 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metal shield, B-Line series B3100 with B3151 or B3153 series. b. 6 inch and larger pipes: i. Adjustable steel yoke pipe, B-Line series B3110, with B3380CW - B3384CW calcium silicate shield. ii. Pipe roll with sockets, B-Line series B3114, with B3380CW - B3384CW calcium silicate shield. B. PIPE CLAMPS 1. When flexibility in the hanger assembly is required due to horizontal movement, use pipe clamps with weldless eye nuts, B-Line series B3140 or B3142 with B3200. For insulated lines use double bolted pipe clamps, B-Line series B3144 or B3146 with B3200. C. MULTIPLE OR TRAPEZE HANGERS 1. Trapeze hangers shall be constructed from 12 gauge roll formed ASTM A1011 SS Gr. 33 structural steel channel, 15/8" x 15/8" minimum, B-Line series B22 strut or stronger as required. 2. Mount pipes to trapeze with two piece pipe straps sized for outside diameter of pipe, B-Line series B2000 series. 3. For pipes subjected to axial movement: a. Strut mounted roller support, B-Line series B3126. Use pipe protection shield or saddles on insulated lines. b. Strut mounted pipe guide, B-Line series B2417. D. WALL SUPPORTS 1. Pipes 4 inch and smaller: a. Carbon steel hook, B-Line series B3191. b. Carbon steel J-hanger, B-Line series B3690. 2. Pipes larger than 4 inch: a. Welded strut bracket and pipe straps, B-Line series B3064 and B2000 series. b. Welded steel brackets, B-Line series B3066 or B3067, with roller chair or adjustable steel yoke pipe roll. B-Line series B3120 or B3110. Use pipe protection shield or saddles on insulated lines. B-Line series Pipe Hangers & Supports 23 Eaton Technical Data Technical Data E. FLOOR SUPPORTS 1. Hot piping under 6 inch and all cold piping: a. Carbon steel adjustable pipe saddle and nipple attached to steel base stand sized for pipe elevation, B-Line series B3093 and B3088T or B3090 and B3088. Pipe saddle shall be screwed or welded to appropriate base stand. 2. Hot piping 6 inch and larger: a. (Adjustable) Roller stand with base plate, B-Line series B3117SL (or B3118SL). b. Adjustable roller support and steel support sized for elevation, B-Line series B3124 F. VERTICAL SUPPORTS 1. Steel riser clamp sized to fit outside diameter of pipe, B-Line series B3373. G. COPPER TUBING SUPPORTS 1. Hangers shall be sized to fit copper tubing outside diameters. a. Adjustable steel swivel ring (band type) hanger, B-Line series B3170CT. b. Malleable iron ring hanger, B-Line series B3198CT or hinged ring hanger B3198HCT. c. Adjustable steel clevis hanger, B-Line series B3104CT. H. PLASTIC PIPE SUPPORTS 1. V-bottom clevis hanger with galvanized 18 gauge continuous support channel, B-Line series B3106 and B3106V, to form a continuous support system for plastic pipe or flexible tubing. I. SUPPLEMENTARY STRUCTURAL SUPPORTS 1. Design and fabricate supports using structural quality steel bolted framing materials as manufactured by Eaton. Channels shall be roll formed, 12 gauge ASTM A1011 SS Grade 33 steel, 15/8" x 15/8" or greater as required by loading conditions. Submit designs for pipe tunnels, pipe galleries, etc., to engineer for approval. Use clamps and fittings designed for use with the strut system. 2.04 UPPER ATTACHMENTS A. BEAM CLAMPS 1. Beam clamps shall be used where piping is to be suspended from building steel. Clamp type shall be selected on the basis of load to be supported, and load configuration. 2. C-Clamps shall have locknuts and cup point set screws, B-Line series B351L, B3036L or Fig. 65XT Top flange C-clamps shall be used when attaching a hanger rod to the top flange of structural shapes, B-Line series B3034 or B3033. Refer to manufacturers' recommendation for setscrew torque. Retaining straps shall be used to maintain the clamp's position on the beam where required (Fig. 69, Fig. 69R). 3. Center loaded beam clamps shall be used where specified. Steel clamps shall be B-Line series B3050 or B3055. Malleable iron or forged steel beam clamps with cross bolt shall be B-Line series B3054 or B3291 - B3297 series as required to fit beams. B. CONCRETE INSERTS 1. Cast in place spot concrete inserts shall be used where applicable, either steel or malleable iron body, B-Line series B2500 or B3014. Spot inserts shall allow for lateral adjustment and have means for attachment to forms. Select insert nuts to suit threaded hanger rod sizes, B-Line series N2500 or B3014N series. Eaton 24 B-Line series Pipe Hangers & Supports Technical Data Technical Data 2. Continuous concrete inserts shall be used where applicable. Channels shall be 12 gauge, ASTM A 1011 SS Grade 33 structural quality carbon steel, complete with styrofoam inserts and end caps with nail holes for attachment to forms. The continuous concrete insert shall have a load rating of 2,000 lbs/ft. in concrete, B-Line series B22I, B32I, or B52I (B52I is limited to 1,500 lbs/ft.). Select channel nuts suitable for strut and rod sizes. 2.05 VIBRATION ISOLATION AND SUPPORTS A. For refrigeration, air conditioning, hydraulic, pneumatic, and other vibrating system applications, use a clamp that has a vibration dampening insert and a nylon inserted locknut. For copper and steel tubing use B-Line series BVT Vibra-ClampTM, for pipe sizes use BVP Vibra-Clamp. B. For larger tubing or piping subjected to vibration, use neoprene or spring hangers as required. C. For base mounted equipment use vibration pads, molded neoprene mounts, or spring mounts as required. D. Vibration isolation products as provided by Eaton's B-Line series. 2.06 ACCESSORIES A. Hanger rods shall be threaded both ends, B-Line series B3205, or continuous threaded rods of circular cross section. Use adjusting locknuts at upper attachments and hangers. No wire, chain, or perforated straps are allowed. B. Shields shall be 180� galvanized sheet metal, 12 inch minimum length, 18 gauge minimum thickness, designed to match outside diameter of the insulated pipe, B-Line series B3151. C. Pipe protection saddles shall be formed from carbon steel, 1/8 inch minimum thickness, sized for insulation thickness. Saddles for pipe sizes greater than 12 inch shall have a center support rib. 2.07 FINISHES INDOOR FINISHES A. Hangers and clamps for support of bare copper piping shall be coated with copper colored epoxy paint, B-Line series DURA-COPPERTM. Additionally a plastic coating or a felt lining in hanger can be used. B. Hangers for other than bare copper pipe shall be zinc plated in accordance with ASTM B633 - SC3 or shall have an electro-deposited green epoxy finish, B-Line series DURA GREENTM. C. Strut channels shall be pre-galvanized in accordance with ASTM A653 G90 or have an electro-deposited green epoxy finish, B-Line series DURA GREEN. OUTDOOR AND CORROSIVE AREA FINISHES D. Hangers and strut located outdoors shall be hot dip galvanized after fabrication in accordance with ASTM A123. All hanger hardware shall be hot-dip galvanized or stainless steel. Zinc plated hardware is not acceptable for outdoor or corrosive use. E. Hangers and strut located in corrosive areas shall be Type 304 (316) stainless steel with stainless steel hardware. B-Line series Pipe Hangers & Supports 25 Eaton Technical Data Technical Data Part III - EXECUTION 3.01 PIPE HANGERS AND SUPPORTS A. Pipe shall be adequately supported by pipe hanger and supports specified in PART II PRODUCTS. Hangers for insulated pipes shall be sized to accommodate insulation thickness. B. Horizontal steel piping shall be supported in accordance with ANSI/MSS SP-69 & SP-58 Tables 3 and 4, excerpts of which follow below: NOMINAL PIPE SIZE ROD DIAMETER MAXIMUM SPACING 3/8" - 11/4" 3/8" 11/2" 3/8" 2" 3/8" 21/2" 1/2" 3" 1/2" 31/2" 1/2" 4" 5/8" 5" 5/8" 6" 3/4" 8" 3/4" 10" 7/8" 12" 7/8" 14" 1" 16" 1" 7'-0" 9'-0" 10'-0" 11'-0" 12'-0" 13'-0" 14'-0" 16'-0" 17'-0" 19'-0" 22'-0" 23'-0" 25'-0" 27'-0" C. Horizontal copper tubing shall be supported in accordance with ANSI/MSS SP-69 & SP-58 Tables 3 and 4, excerpts of which follow below: NOMINAL TUBING SIZE ROD DIAMETER MAXIMUM SPACING 1/4" - 3/4" 3/8" 1" 3/8" 11/4" 3/8" 11/2" 3/8" 2" 3/8" 21/2" 1/2" 3" 1/2" 31/2" 1/2" 4" 1/2" 5" 1/2" 6" 5/8" 8" 3/4" 5'-0" 6'-0" 7'-0" 8'-0" 8'-0" 9'-0" 10'-0" 11'-0" 12'-0" 13'-0" 14'-0" 16'-0" D. Provide means of preventing dissimilar metal contact such as plastic coated hangers, copper colored B-Line series DURA-COPPERTM epoxy paint, or non-adhesive isolation tape (B-Line series Iso-PipeTM). Galvanized felt isolators sized for copper tubing may also be used, B-Line series B3195CT. Eaton 26 B-Line series Pipe Hangers & Supports Technical Data E. Support horizontal cast iron pipe adjacent to each hub, with 10 feet maximum spacing between hangers. F. Install hangers to provide a minimum of 1/2 inch space between finished covering and adjacent work. G. Place a hanger within 12 inches of each horizontal elbow. H. Support vertical piping independently of connected horizontal piping. Support vertical pipes at every (other) floor. Wherever possible, locate riser clamps directly below pipe couplings or shear lugs. I. Where several pipes can be installed in parallel and at the same elevation, provide trapeze hangers as specified in Section 2.02 C. Trapeze hangers shall be spaced according to the smallest pipe size, or install intermediate supports according to schedule in Section 3.01 B. J. Do not support piping from other pipes, ductwork or other equipment which is not building structure. 3.02 CONCRETE INSERTS A. Provide inserts for placement in formwork before concrete is poured. B. Provide inserts for suspending hangers from reinforced concrete slabs and sides of reinforced concrete beams. C. Where concrete slabs form finished ceilings, provide inserts to be flush with slab surface. D. For inserts carrying 5" nominal pipe and larger, provide hooked rod to concrete reinforcement. Technical Data B-Line series Pipe Hangers & Supports 27 Eaton Beam Clamps Beam Clamps Beam clamps offered in this section are designed to provide attachment of hanger rods to structural members without drilling or welding. A wide range of types and sizes are available for various applications. Materials Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps and accessories. Stainless steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Galvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating and DURA GREENTM. Other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, copper plated, or in stainless steel. Recommended Set screw Torque (unless otherwise specified) 1/4"-20 4 ft/lbs (5 Nm) 3/8"-16 5 ft/lbs (7 Nm) 1/2"-13 11 ft/lbs (15 Nm) 5/8"-11 21 ft/lbs (28 Nm) 3/4"-10 34 ft/lbs (46 Nm) Over torqued set screws will damage beam clamps in this section. We are aware that torque wrenches are not used or not available in many instances. In the absence of a torque wrench, the set screw should be finger tightened to the I-beam and then an additional 1/4 to 1/2 turn applied to the set screw. Approvals (as noted) Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 28 B-Line series Pipe Hangers & Supports Beam Clamps B351L - Steel C-Clamp With Locknut Size Range: 3/8"-16 thru 7/8"-9 rod Material: Steel Function: For attachment to I-beams, channels, and wide flange beams where the thickness does not exceed 3/4" (19.0mm). Hardened set screw secures "C" Clamp to beam. Approvals: B351L (3/8"-16 thru 3/4"-10), is Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 23 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 23. Finish: Plain. Contact customer service for alternative finishes and materials. Note: When retaining strap is required, order B3362 thru B3365 separately. See page 30. Order By: Part number and finish Part No. B351L-3/8 B351L-1/2 B351L-5/8 B351L-3/4 B351L-7/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 B in. (mm) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 3" (76.2) C in. (mm) 23/8" (60.3) 23/8" (60.3) 21/4" (57.1) 21/4" (57.1) 31/4" (82.5) Note: See page 28 for recommended setscrew torque. D in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 1" (25.4) Design Load Lbs. (kN) 300 (0.89) 380 (1.69) 550 (2.44) 630 (2.80) 1200 (5.34) Set Screw and D Locknut Included B A (Rod Size) Hanger Rod Not Included C Maximum Iron Pipe Size Per UL in. (mm) 4" (100) 6" (150) 6" (150) 6" (150) -- -- Approx. Wt./100 Lbs. (kg) 41 (18.6) 41 (18.6) 60 (27.2) 71 (32.2) 184 (83.4) B3036L - Malleable Iron C-Clamp With Locknut Size Range: 3/8"-16 thru 3/4"-10 rod Material: Malleable Iron Function: Designed for attaching a hanger rod to the flange of a beam. Approvals: B3036L is Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Complies with Federal Specification WW-H-171E & A-A-1192A Type 23 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 Type 23. Finish: Plain or Electro-Galvanized Order By: Part number and finish. When retaining strap is required, order B3362 thru B3365 separately. See page 30. Set Screw and Locknut Included A (Rod Size) Hanger Rod Not Included 3/4" (19.0) B C Beam Clamps Part No. B3036L-3/8 B3036L-1/2 B3036L-5/8 B3036L-3/4 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 B in. (mm) 13/4" (44.4) 13/4" (44.4) 2" (50.8) 2" (50.8) C in. (mm) 13/4" (44.4) 13/4" (44.4) 17/8" (47.6) 2" (50.8) Design Load Lbs. (kN) 300 (0.89) 380 (1.69) 530 (2.36) 530 (2.36) Note: See page 28 for recommended setscrew torque. Maximum Iron Pipe Size Per UL in. (mm) 4" (100) 5" (125) 6" (150) 6" (150) Approx. Wt./100 Lbs. (kg) 41 (18.6) 41 (18.6) 60 (27.2) 71 (32.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 29 Eaton Beam Clamps B3362, B3363, B3364, B3365 - Retaining Strap Size Range: 6" (152.4mm) to 12" (304.8mm) lengths Material: Steel (Stainless Steel available) Finish: Pre-Galvanized Function: Designed for use with B351L and B3036L C-Clamps. Order By: Part number, length 'L', (add 1" (25.4) minimum to flange width), and finish. Note: Requires field forming on beam. Flange Width in. (mm) 3"-5" (76-127) 5"-7" (127-178) 7"-9" (178-228) 9"-11" (228-279) Length L in. (mm) 6" (152.4) 8" (203.2) 10" (254.0) 12" (304.8) B 3/4" (19.0) L A Material Thickness 12 Gauge (2.7) Part No. B3362-L B3363-L B3364-L B3365-L For Use With B351L-3/8 & 1/2 B351L-5/8 & 3/4, B3036L-3/8 & 1/2 B3036L-5/8 & 3/4 B351L-7/8 A in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) B in. (mm) 7/16" (11.1) 5/8" (15.9) 11/16" (17.4) 3/4" (19.0) 6" (152.4) Lbs. (kg) 27 (12.2) 26 (11.8) Approx. Wt./100 for Length 'L' of 8" (203.2) 10" (254.0) Lbs. (kg) Lbs. (kg) 35 (15.9) 44 (19.9) 35 (15.9) 43 (19.5) 12" (304.8) Lbs. (kg) 52 (23.6) 52 (23.6) 26 (11.8) 32 (14.5) 35 (15.9) 42 (19.0) 43 (19.5) 52 (23.6) 52 (23.6) 62 (28.1) B3037Z - Z-Purlin Malleable C-Clamp Material: Malleable Iron Function: Designed for attaching a 3/8"-16 hanger rod to the bottom flange of a Z-purlin. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) for up to 4" (100mm) pipe. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 23 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 23. Finish: Plain or Electro-Galvanized Order By: Part number and finish. Weight: Approx. Wt./100 90 Lbs. (40.8kg) Design Load: 400 Lbs. (1.78kN) Note: See page 28 for recommended setscrew torque. Set Screw and Locknut Included 3" (76.2) 313/32" (86.5) Throat Opening 31/32" (24.6) Bottom Hanger Rod Threads 3/8"-16 Beam Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 30 B-Line series Pipe Hangers & Supports B3031-3/8 - Light Duty Malleable C-Clamp Material: Malleable Iron Function: Designed for attaching a 3/8"-16 hanger rod to the top or bottom flange of a beam or bar joist when setscrew is in the down position as shown. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) for up to 4" pipe. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19. Finish: Plain or Electro-Galvanized Order By: Part number and finish. When retaining strap is required, order Fig. 69 separately. See Page 37. Weight: Approx. Wt./100 25 Lbs. (11.3kg) Design Load: 350 Lbs. (1.55kN) Note: See page 28 for recommended setscrew torque. Beam Clamps 3/4" (19.0) 11/2" (38.1) 17/8" (47.6) Throat Opening 11/16" (17.5) Hanger Rod Not Included Set Screw and Locknut Included B3033 - Wide Jaw Reversible C-Clamp Size Range: 3/8"-16 thru 3/4"-10 rod Material: Cast Malleable Steel with hardened cup point set screw and jam nut Function: For attachment to structural shapes requiring wider throat Throat Opening especially under roof with bar joist construction. 11/4" (31.7) for B3033-3/8 & 1/2 This clamp may be used with the set screw in the up or down position. 15/16" (33.3) for B3033-5/8 & 3/4 Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering Approved (FM). Conforms to Federal Specification WW-H-171E Type 19 & A-A-1192A, Type 19 & 23 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19 & 23. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish C Set Screw and Locknut Included D B A (Rod Size) Hanger Rod Not Included Top Flange Attachment Applications Beam Clamps Bottom Flange Attachment Applications Part No. B3033-3/8 B3033-1/2 B3033-5/8 B3033-3/4 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 B in. (mm) 21/4" (57.1) 25/16" (58.7) 25/8" (66.7) 211/16" (68.3) C in. (mm) 2" (50.8) 23/16" (55.6) 21/2" (63.5) 21/2" (63.5) D in. (mm) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 17/16" (36.5) Design Load with Setscrew Maximum Iron Pipe Size Per UL Lbs. (kN) in. (mm) 500 (2.22) 4" (100) 810 (3.60) 8" (200) 1000 (4.45) 8" (200) 1400 (6.23) 10" (250) Approx. Wt./100 Lbs. (kg) 54 (24.5) 51 (23.1) 70 (31.7) 98 (44.4) Note: See page 28 for recommended setscrew torque. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 31 Eaton Beam Clamps Beam Clamps B3034 - C-Clamp Size Range: 3/8"-16 thru 3/4"-10 rod Material: Cast Malleable Steel with hardened cup point set screw and jam nut Function: Recommended for hanging from steel beam where flange thickness does not exceed 3/4" (19.0mm). Features: May be used on top or bottom flange of the beam. Beveled lip allows hanging from top flange where clearance is limited. may be installed with the set screw in the up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. The rear window design permits inspection of thread engagement. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering Approved (FM) for 3/8"-16 and 1/2"-13 rod sizes. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 & 23 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19 & 23. 3/8"-16 is (cULus) Listed to support up to 4" (100mm) pipe with the set screw in the down position, up to 3" (75mm) pipe with the set screw in the up position. 1/2"-13 is (cULus) Listed to support up to 8" (200mm) pipe with the set screw in the down position, up to 6" (150mm) pipe with the set screw in the up position. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish B3034-5/8" and B3034-3/4" sizes Attach only as shown. B3034-3/8" and B3034-1/2" sizes Attach only as shown. D C Throat Opening 3/4" (19.0) Set Screw and Locknut Included B A (Rod Size) Hanger Rod Not Included B3034-3/8 Shown Top Flange Attachment Applications C D Throat Opening 3/4" (19.0) Set Screw and Locknut Included B A (Rod Size) Hanger Rod Not Included Bottom Flange Attachment Applications Part No. B3034-3/8 B3034-1/2 B3034-5/8 B3034-3/4 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 B in. (mm) 15/8" (41.3) 113/16" (46.0) 13/4" (44.5) 2" (50.8) C in. (mm) 2" (50.8) 23/16" (55.6) 21/8" (54.0) 21/4" (57.2) D in. (mm) 7/8" (19.0) 13/16" (30.2) 11/4" (31.7) 11/4" (31.7) Design Load with Setscrew Lbs. (kN) 560 (2.49) 810 (3.60) 1000 (4.45) 1500 (6.67) Maximum Iron Pipe Size Per UL in. (mm) 4" (100) 8" (200) -- -- -- -- Note: See page 28 for recommended setscrew torque. Approx. Wt./100 Lbs. (kg) 30 (13.6) 47 (21.3) 58 (26.3) 77 (35.0) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 32 B-Line series Pipe Hangers & Supports Beam Clamps TOLCOTM Fig. 65 - Reversible Steel C-Type Beam Clamp 3/4" (19.0mm) Throat Opening Size Range: 1/2"-13 and 5/8"-11 rod sizes Material: Steel with hardened cup point set screw and jam nut Function: Recommended for hanging from steel beam where flange thickness does not exceed 3/4" (19.0mm). Features: All steel construction eliminates structural deficiencies associated with casting type beam clamps. May be used on top or bottom flange of beam. (Beveled lip allows hanging from top flange where clearance is limited.) May be installed with set screw in up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. Open design permits inspection of thread engagement. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Exceeds requirements of the National Fire Protection Association (NFPA), pamphlet 13, 3/8"-16 rod will support 1/2" (15mm) thru 4" (100mm) pipe 1/2"-13 rod will support 1/2" (15mm) thru 8" (200mm) pipe Included in the Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load spacing and placement information relating OSHPD projects, please refer to the Seismic Restraint System Guidelines. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Fig. 65 Patent #4,570,885 Component of State of California OSHPD Approved Seismic Restraints System B D E C F A Set Screw and Locknut Included Part No. 65-1/2 65-5/8 Rod Size A 1/2"-13 5/8"-11 B in. (mm) 11/2" (38.1) 11/2" (38.1) C in. (mm) 3/4" (19.0) 3/4" (19.0) D in. (mm) 1" (25.4) 1" (25.4) E in. (mm) 9/16" (14.3) 9/16" (14.3) Part No. 65-1/2 65-5/8 F in. (mm) 11/4" (31.7) 11/4" (31.7) Max. Rec. Load * Approx. Wt./100 lbs. (kN) lbs. (kg) 1130 (5.02) 1130 (5.02) 55 (24.9) 55 (24.9) * Maximum loads for clamp with set screw in up or down position. Note: See page 28 for recommended setscrew torque. Beam Clamps TOLCOTM Fig. 65XT - Reversible Steel C-Type Beam Clamp 3/4" (19.0mm) Throat Opening Size Range: 3/8"-16 rod size Feature: Extruded holes allow for more thread engagement of threaded rod and set screw. Weight: Approx. Wt./100 - 28.0 Lbs. (12.7kg) Design Load: 730 Lbs (3.25kN) Finish: Plain or Electro-Galvanized Order By: Part number and finish Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering Approved (FM) for up to 4" (100mm) pipe. Note: See page 28 for recommended setscrew torque. 3/4" (19.0) Set Screw and Locknut Included 11/8" (28.6) 19/16" (39.7) 13/8" (34.9) 7/8" (22.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 33 Eaton Beam Clamps TOLCOTM Fig. 66 - Reversible Steel C-Type Beam Clamp 11/4" (31.7mm) Throat Opening Size Range: 3/8"-16, 1/2"-13 rod sizes, and 5/8"-11 rod sizes Material: Steel with hardened cup point set screw and jam nut Component of State of California OSHPD Approved Seismic Restraints System Function: Recommended for hanging from steel beam where flange thickness does not exceed 11/4" (31.7mm). Features: All steel construction eliminates structural deficiencies associated with casting type beam clamps. May be used on top or bottom flange of beam. (Beveled lip allows hanging from top flange where clearance is limited.) May be installed with set screw in up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. Open design permits inspection of thread engagement. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Exceeds requirements of the National Fire Protection Association (NFPA), pamphlet 13, 3/8"-16 rod will support 1/2" (15mm) thru 4" (100mm) pipe 1/2"-13 rod will support 1/2" (15mm) thru 8" (200mm) pipe F Included in the Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load spacing and placement information relating OSHPD projects, please refer to the Seismic Restraint System Guidelines. B D E C A Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Set Screw and Locknut Included Beam Clamps Part No. 66-3/8 66-1/2 66-5/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 B in. (mm) 13/16" (30.2) 11/2" (38.1) 11/2" (38.1) C in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) D in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) Part No. 66-3/8 66-1/2 66-5/8 F in. (mm) 1" (25.4) 11/4" (31.7) 11/4" (31.7) Max. Rec. Load * Approx. Wt./100 lbs. (kN) lbs. (kg) 610 (2.71) 1130 (5.02) 1130 (5.02) 28 (12.7) 55 (24.9) 55 (24.9) * Maximum loads for clamp with set screw in up or down position. Note: See page 28 for recommended setscrew torque. E in. (mm) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 34 B-Line series Pipe Hangers & Supports Beam Clamps TOLCOTM Fig. 67SS - Stainless Steel Reversible C-Type Beam Clamp 3/4" (19.0mm) Throat Opening TOLCOTM Fig. 68SS - Stainless Steel Reversible C-Type Beam Clamp Wide Mouth Size Range: 3/8"-16 and 1/2"-13 rod sizes Material: Stainless Steel (Type 316 or 304) Function: Recommended for hanging from steel beams where flange thickness does not exceed 3/4" (19.0mm) for Fig. 67SS or 11/4" (31.7mm) for Fig. 68SS. Features: All steel construction eliminates structural deficiencies associated with casting type beam clamps. May be used on top or bottom flange of beam. May be installed with set screw in up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19. Meets or exceeds requirements of the National Fire Protection Association (NFPA), pamphlet 13. 3/8"-16 rod will support 1/2" (15mm) thru 4" (100mm) pipe 1/2"-13 rod will support 1/2" (15mm) thru 8" (200mm) pipe Order By: Part number and stainless steel type. B E G D Beam Clamps Set Screw and Locknut Included Fig. 67SS Part No. 67SS-3/8 67SS-1/2 Rod Size A 3/8"-16 1/2"-13 Pipe Size in. (mm) 1/2" - 4" (15 - 100) 5" - 8" (125 -200) B in. (mm) 3" (76,2) 3" (76,2) C in. (mm) 7/8" (22.2) 7/8" (22.2) D in. (mm) 1" (25.4) 1" (25.4) Part No. 67SS-3/8 67SS-1/2 F in. (mm) 15/8" (41.3) 15/8" (41.3) G in. (mm) 11/8" (28.6) 11/8" (28.6) Test Load lbs. (kN) 1500 (6.67) 4050 (18.01) Approx. Wt./100 lbs. (kg) 84 (38.1) 170 (77.1) CF A E in. (mm) 15/8" (41.3) 15/8" (41.3) Fig. 68SS * Part No. 68SS-3/8 68SS-1/2 Rod Size A 3/8"-16 1/2"-13 Pipe Size in. (mm) 1/2" - 4" (15 - 100) 5" - 8" (125 -200) B in. (mm) 21/16" (52.4) 21/4" (57.1) C in. (mm) 11/8" (28.6) 11/4" (31.7) Part No. 68SS-3/8 68SS-1/2 F in. (mm) 2" (50.8) 21/4" (57.1) Test Load lbs. (kN) 1500 (6.67) 4050 (18.01) Approx. Wt./100 lbs. (kg) 84 (38.1) 170 (77.1) * Fig. 68SS minimum order quantity of 30 pieces. Note: See page 28 for recommended setscrew torque. D in. (mm) 3/4" (19.0) 13/16" (20.6) E in. (mm) 11/4" (31.7) 11/4" (31.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 35 Eaton Beam Clamps B303-B309 - Beam Clamp Size Range: 1/4"-20 thru 5/8"-11 rod Material: Steel Function: Designed for attaching a hanger rod to the flange of a beam. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19. Finish: Electro-Galvanized or Hot-Dip Galvanized Order By: Part number and finish. When retaining strap is required, order B312 separately. See page 39. Recommended Set Screw Torque: 3/8"-16 = 150 in-lbs (16.9 N�m) 1/2"-13 = 350 in-lbs (39.5 N�m) Part No. B303 B304 B305 B306 B307 B308 B309 Rod Size A 1/4"-20 5/16"-18 3/8"-16 3/8"-16 1/2"-13 1/2"-13 5/8"-11 Setscrew Size 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 C in. (mm) 25/16" 25/16" 25/16" 27/16" 27/16" 29/16" 29/16" (58.7) (58.7) (58.7) (61.9) (61.9) (65.1) (65.1) T in. (mm) 11 Ga. (3.0) 11 Ga. (3.0) 11 Ga. (3.0) 7 Ga. (4.5) 7 Ga. (4.5) 1/4" (6.3) 1/4" (6.3) 7/8" (22.2) Maximum Flange Thickness T C A 21/2" (63.5) Set Screw Included 11/8" (28.6) Design Load Lbs. (kN) 400 (1.78) 600 (2.67) 600 (2.67) 1100 (4.89) 1100 (4.89) 1500 (6.67) 1500 (6.67) Approx. Wt./100 Lbs. (kg) 72 (32.6) 72 (32.6) 72 (32.6) 97 (44.0) 97 (44.0) 133 (60.3) 133 (60.3) Beam Clamps Fig. B321 - Series Beam Clamp Size Range: 3/8"-16 thru 3/4"-10 rod Material: Steel Function: Designed for attaching a hanger rod to the flange of a beam. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 19. Finish: Electro-Galvanized or Hot-Dip Galvanized Ordering: Part number and finish. When retaining strap is required, order B312 separately. See page 39. Recommended Set Screw Torque: 1/2"-13 = 350 in-lbs (39.5 N�m) 5/8"-11 = 700 in-lbs (79.0 N�m) Minimum Flange Thickness: For B321-1 thru B321-3 = 3/8" (9.5) For B321-4 & B321-5 = 5/8" (15.9) Set Screw Included T 111/16" (42.8) Maximum Flange Thickness C 15/8" (41.3) 31/4" (82.5) A Part No. B321-1 B321-2 B321-3 B321-4 B321-5 Rod Size A 3/8"-16 1/2"-13 5/8"-11 5/8"-11 3/4"-10 Setscrew Size 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 C in. (mm) 39/16" (92.1) 39/16" (92.1) 39/16" (92.1) 323/32" (94.4) 323/32" (94.4) T in. (mm) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 5/16" (7.9) 5/16" (7.9) Design Load Lbs. (kN) 1300 (5.78) 1400 (6.23) 1600 (7.12) 1800 (8.00) 2000 (8.89) Approx. Wt./100 Lbs. (kg) 187 (84.8) 186 (84.3) 185 (83.9) 239 (108.4) 238 (107.9) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 36 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 69 - Beam Clamp Retaining Strap Size Range: 3/8"-16 thru 3/4"-10 rod 4" (101,6mm) thru 16" (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized Steel Function: To offer more secure fastening of various types of beam clamps to beam where danger of movement might be expected. NFPA 13 requires the use of retaining straps with all beam clamps installed in earthquake areas. Satisfies requirements of NFPA 13. Important Note: Good installation practice of a retaining strap requires that the strap be held tightly and securely to all component parts of the assembly. Therefore a locking mechanism of some kind, such as a hex nut or the beveled locking slot of the Fig. 69R will provide a more secure reliable installation. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Approved for use with any listed beam clamp. Included in the Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load spacing and placement information relating OSHPD projects, please refer to the Seismic Restraint System Guidelines. Finish: Pre-Galvanized Order By: Part number, length (L), and finish. Note: Minimum return on strap is 1" (25.4mm) Lengths over 16" (406mm) are not UL Listed Beam Clamps Component of State of California OSHPD Approved Seismic Restraints System Fig. 69-3/8-1/2 7/16" (11.1) 9/16" (14.3) D Fig. 69-5/8 & 3/4 Part No. Hole Dia. D in. (mm) 69-3/8-1/2-L see drawing 69-5/8-L 69-3/4-L 11/16" (17.5) 13/16" (20.6) For Use With B3033-3/8, B3034-3/8, B3031-3/8, 65-3/8, 65XT-3/8, 66-3/8 B3033-1/2, B3034-1/2, 65-1/2, 66-1/2 B3033-5/8, 65-5/8, 66-5/8 B3033-3/4 Length Specify Specify Specify Beam Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 37 Eaton Beam Clamps TOLCOTM Fig. 69R - Retrofit Capable Beam Clamp Retaining Strap Size Range: 3/8"-16 & 1/2"-13 rod 4" (101,6mm) thru 16" (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized Steel Function: To offer more secure fastening of various types of beam clamps to beam where danger of movement might be expected. NFPA 13 requires the use of retaining straps with all beam clamps installed in earthquake areas. Satisfies requirements of NFPA 13. Features: Beveled locking slot* is precisely formed to align with the threaded section of a hanger rod or set screw and engage the unit securely. May be used as shown in Section "A-A" or inverted. Allows easy installation for new construction or retrofit applications. Important Note: Good installation practice of a retaining strap requires that the strap be held tightly and securely to all component parts of the assembly. Therefore a locking mechanism of some kind, such as a hex nut or the beveled locking slot of the Fig. 69R will provide a more secure reliable installation. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Approved for use with any listed beam clamp. Included in the Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load spacing and placement information relating OSHPD projects, please refer to the Seismic Restraint System Guidelines. Finish: Pre-Galvanized Order By: Part number, length, and finish. Note: Minimum return on strap is 1" (25.4mm) * Patent #5,947,424 A A Part No. 69R-3/8-L 69R-1/2-L Slot Width in. (mm) 7/16" (11.1) 9/16" (14.3) For Use With B3033-3/8, B3034-3/8, B3031-3/8, 65-3/8, 65XT-3/8, 66-3/8 B3033-1/2, B3034-1/2, 65-1/2, 66-1/2 Length Specify Specify Component of State of California OSHPD Approved Seismic Restraints System A - A Beam Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 38 B-Line series Pipe Hangers & Supports B312 - Retaining Strap Size Range: 9" (228.6mm) to 18" (457.2mm) strap lengths Material: Steel Function: Designed for use with B303-B309 and B321 beam clamps. Finish: Pre-Galvanized 11/4" Order By: Part number and finish. (31.7) Note: Maximum beam thickness 3/4" (19.0). For thicker beams step up one flange width size. Requires field forming on beam. Beam Clamps Material Thickness 14 Gauge (1.9) 13/4" L (44.4) 1/2" (12.7) 1/4" (6.3) Beam Clamps Part No. B312-6 B312-9 B312-12 B312-15 For Flange With in. (mm) 6" (152.4) 9" (228.6) 12" (304.8) 15" (381.0) L in. (mm) 9" (228.6) 12" (304.8) 15" (381.0) 18" (457.2) Approx. Wt./100 Lbs. kg 22 (10.0) 30 (13.6) 40 (18.1) 49 (22.2) B3040 - Adjustable Beam Clamp Size Range: 3/8"-16 thru 3/4"-10 rod Material: Steel Function: Fits structural I-Beams and wide flange beams, flange widths 31/2" (88.9mm) to 8" (203.2mm), thickness up to 1/2" (12.7mm). Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 54, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 27. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish J-Hook and Hex Nut Included C Center of J-Hook to bottom of clamp body. B A (Rod Size) Hanger Rod Not Included Steel Size C Part No. B3040-3/8 B3040-1/2 B3040-5/8 B3040-3/4 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 B in. (mm) 23/4" (69.8) 23/4" (69.8) 3" (76.2) 33/8" (85.7) C in. (mm) 113/16" (46.0) 13/4" (44.4) 13/4" (44.4) 17/8" (47.6) Steel Size in. (mm) 1/4" x 11/4" (6.3 x 31.7) 1/4" x 11/2" (6.3 x 38.1) 1/4" x 13/4" (6.3 x 44.4) 3/8" x 2" (9.5 x 50.8) Design Load Lbs. (kN) 300 (1.33) 700 (3.11) 1000 (4.45) 1800 (8.00) Approx. Wt./100 Lbs. (kg) 120 (54.4) 160 (72.6) 216 (98.0) 442 (200.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 39 Eaton Beam Clamps B3050 - Beam Clamp Material: Steel Function: Recommended for the suspending of hanger rod from the center of an I-beam, equally distributing the load on both sides of the beam. Use with B3210 eye rod, B3211 welded eye rod or B3200 weldless eye nut. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 21 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 21. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, type, width of flange and finish. A Center of bolt to bottom of beam flange. Bolt and Nut Included Bolt Size 'W' B Steel Size A C Part Number & Size B3050-2 X * B3050-5 X * Bolt Size 1/2"-13 3/4"-10 Flange Thickness Min. Max. in. (mm) in. (mm) 3/16" (4.8) 1/2" (12.7) 5/8" (25.9) 1" (25.4) * Any flange width shown in bottom chart. A in. (mm) 13/8" (34.9) 17/8" (47.6) B in. (mm) 5/8" (15.9) 7/8" (22.2) C in. (mm) 21/8" (54.0) 3" (76.2) Steel Size in. (mm) 1/4"x 11/4" (6.3 x 31.7) 1/2"x 2" (12.7 x 50.8) Design Load Lbs. (kN) 1000 (3.11) 3000 (6.67) Flange Width * 'W' in. (mm) 4 4" (101.6) 5 5" (127.0) 6 6" (152.4) 7 7" (177.8) 8 8" (203.2) 9 9" (228.6) 10 10" (254.0) 12 12" (304.8) Approx. Wt./100 For Beam Clamp Size 2 lbs. (kg) 5 lbs. (kg) 116 (52.6) 429 (194.6) 125 (56.7) 458 (207.8) 134 (60.8) 486 (220.5) 143 (64.9) 514 (233.2) 152 (69.0) 543 (246.3) 160 (72.6) 571 (259.0) 169 (76.7) 599 (271.8) 187 (84.8) 656 (297.6) Beam Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 40 B-Line series Pipe Hangers & Supports Beam Clamps Beam Clamps B3055 - Steel Beam Clamp Size Range: 3/8"-16 thru 1"-8 rod Material: Steel Function: Designed for attaching a hanger rod to be centered under beam flanges. 2" (50.8mm) vertical adjustment is provided in the clamp. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 21 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 21. Finish: Plain or Electro-Galvanized Order By: Part number, flange width, and finish. Note: Consult factory for additional flange widths. Part No. B3055-3/8 B3055-1/2 B3055-5/8 B3055-3/4 B3055-7/8 B3055-1 Steel Size Bolt and Nut Included W B C Center of cross bolt to bottom of side of B hanger rod nut. A (Rod Size) Hanger Rod Not Included NOTE: Slots on bottom portions of clamp halves allow 1" (25.4) adjustment for variance in flange widths Steel Size W C B A (Rod Size) Hanger Rod Not Included Note: Box Style Furnished For B3055-3/8 x 4" B3055-1/2 x 4" B3055-5/8 x 4" B3055-3/4 x 4" B3055-7/8 x 4" B3055-7/8 x 5" B3055-1 x 4" B3055-1 x 5" B3055-1 x 6" Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 B in. (mm) 3" (76.2) 3" (76.2) 31/4" (82.5) 31/4" (82.5) 31/2" (88.9) 31/2" (88.9) C in. (mm) 4" (101.6) 4" (101.6) 41/2" (114.3) 41/2" (114.3) 5" (127.0) 51/2" (139.7) Steel Size in. (mm) 1/4" x 11/4" (6.3 x 31.7) 1/4" x 11/2" (6.3 x 38.1) 3/8" x 11/2" (9.5 x 38.1) 3/8" x 2" (9.5 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) Design Load Lbs. (kN) 550 (2.44) 850 (3.78) 1100 (4.89) 1500 (6.67) 2600 (11.56) 4300 (19.12) Flange Width W in. (mm) 4" (101.6) 5" (127.0) 6" (152.4) 7" (177.8) 8" (203.2) 10" (254.0) 12" (304.8) B3055-3/8" 168 (76.2) 181 (82.1) 193 (87.5) 205 (93.0) 214 (97.1) 235 (106.6) 259 (117.5) Approximate Wt./100 For Beam Clamp Size Lbs. (kg) B3055-1/2" B3055-5/8" B3055-3/4" B3055-7/8" 201 (91.2) 328 (148.8) 434 (196.8) 657 (298.0) 217 (98.4) 352 (159.6) 466 (211.4) 667 (302.5) 231 (104.8) 373 (169.2) 495 (224.5) 705 (319.8) 246 (111.6) 395 (179.2) 525 (238.1) 744 (337.5) 256 (116.1) 411 (186.4) 546 (247.6) 773 (350.6) 282 (127.9) 449 (203.6) 596 (270.3) 840 (381.0) 311 (141.0) 493 (223.6) 655 (297.1) 918 (416.4) B3055-1" 797 (361.5) 824 (373.7) 877 (397.8) 926 (420.0) 962 (436.3) 1046 (474.4) 1143 (518.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 41 Eaton Beam Clamps Beam Clamps B3054 - Malleable Iron Beam Clamp With Extension B3054WO - Malleable Iron Beam Clamp Without Extension Size Range: 3/8"-16 thru 7/8"-9 rod Material: Malleable Iron Function: Designed for attaching a hanger rod to the bottom flange of a beam. Adjustable for flange widths of 3" (76.2mm) to 7" (177.8mm) and a flange thickness of no greater than 5/8" (15.9mm). Approvals: Underwriters Laboratories Listed. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 30 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 30. Finish: Plain or Electro-Galvanized Ordering: Part number and finish Clamping Rod and Nuts Included E E Rod Take-Out A (Rod Size) Hanger Rod Not Included B3054WO B3054-Rod Size Part No. B3054-3/8 B3054-1/2 B3054-5/8 B3054-3/4 B3054-7/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 3" (76.2) 411/16" (119.1) 413/16" (122.2) 47/8" (123.8) 51/8" (130.2) 53/16" (131.8) Rod Take Out 'E' For Beam Flange Width Of in. (mm) 4" (101.6) 5" (127.0) 6" (152.4) 49/16" (115.9) 45/8" (117.5) 4" (101.6) 41/2" (114.3) 45/16" (109.5) 315/16" (100.0) 45/8" (117.5) 43/8" (111.1) 33/4" (95.2) 5" (127.0) 45/8" (117.5) 41/4" (107.9) 47/8" (123.8) 411/16" (119.1) 45/16" (109.5) 7" (177.8) 31/8" (79.4) 31/4" (82.5) 35/16" (84.1) 33/4" (95.2) 33/4" (95.2) Part No. B3054-3/8 B3054-1/2 B3054-5/8 B3054-3/4 B3054-7/8 Design Load Lbs. (kN) 730 (3.25) 1350 (6.00) 1365 (6.07) 1365 (6.07) 1365 (6.07) Max. Iron Pipe Size Per UL in. (mm) 4" (100) 8" (200) 10" (250) 10" (250) 10" (250) Approx. Wt./100 Lbs. (kg) 236 (107.0) 254 (115.2) 260 (117.9) 278 (126.1) 292 (132.4) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 42 B-Line series Pipe Hangers & Supports Beam Clamps Beam Clamps B3291, B3292, B3293, B3294, B3295, B3296, B3297, B3298 UFS Beam Clamp With Weldless Eye Nut Available with left hand threads by adding an L to part number Example: B3291L-* Size Range: 3/8"-16 thru 2"-41/2 rod C Material: Forged Steel Function: Designed for attaching a hanger rod to the bottom flange of a beam. Adjustable from flange widths of 3" (76.2mm) to 15" (381.0mm). and flange thickness of no greater than 11/32" (26.2mm). Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A (Type 28 without links; Type 29 with links,) and ANSI/MSS SP-58 (Type 28 without links; Type 29 with links). Finish: Plain or Electro-Galvanized A Order By: Part number, rod size and finish. E B Without Links With Links Note: Design load for B3291 thru B3295 based on maximum rod size shown. Use the appropriate all threaded rod design load shown on page 322 for sizes less than maximum. C E B A B3294 B3293 Part No. *Rod Size B3291-* B3292-* B3293-* Maximum Beam Flange Thickness In. (mm) .60 (15.2) .60 (15.2) .60 (15.2) B3294-* B3295-* B3296-* 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) B3297-* B3298-* 1.031 (26.2) 1.031 (26.2) Rod Size A (Specify) * 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10 7/8"-9, 1"-8 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10, 7/8"-9, 1"-8 7/8"-9, 1"-8 7/8"-9, 1"-8 1"-8, 11/8"-7, 11/4"-7, 11/2"-6 11/8"-7, 11/4"-7, 11/2"-6 13/4"-5, 2"-41/2 B In. (mm) 11/4" (31.7) 111/16" (42.9) 111/16" (42.9) C In. (mm) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/2" (38.1) 11/2" (38.1) 21/8" (54.0) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 21/8" (54.0) 49/16" (115.9) 11/8" (28.6) 11/8" (28.6) Design Load Lbs. (kN) Approx. Wt./100 Lbs. (kg) 3230 (14.36) 5900 (26.24) 5900 (26.24) 390 (176.9) 915 (415.0) 1300 (589.6) 5900 5900 11500 (26.24) (26.24) (51.15) 2165 (982.0) 3385 (1535.4) 2390 (1084.1) 11500 (51.15) 11500 (51.15) 3575 (1621.6) 3675 (1666.9) 'E' Rod Take-Out For Flange Width Part No. 3" 4" 5" 6" 7" 8" 9" 10" 11" 12" B3291-* 41/2" 55/16" 41/16" 35/8" 27/8" -- -- -- -- -- B3292-* -- 43/4" 47/16" 41/16" 33/8" -- -- -- -- -- B3293-* -- -- -- -- 515/16" 6" 55/16" 5" -- -- B3294-* -- 613/16" 65/8" 63/8" 57/8" 57/8" 53/8" 413/16" -- -- B3295-* B3296-* -- -- -- -- 73/16" 7" -- -- -- -- -- 81/8" 73/4" 63/4" 61/4" 65/16" 513/16" 53/16" -- -- B3297-* -- -- -- -- -- -- -- -- 81/2" 81/8" B3298-* -- 83/8" 87/16" 83/16" 73/4" 73/4" 71/4" 65/8" -- -- To determine (mm) in the above chart, multiply inches by 25.4. * Rod Size required to finish part number (see Rod Size 'A' in top chart). These part numbers are furnished with links. 13" 14" 15" -- -- -- -- -- -- -- -- -- -- -- -- 71/8" 65/8" 61/16" -- -- -- 71/2" 7" 67/16" -- -- -- All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 43 Eaton Beam Clamps Beam Clamps B3042 - Top Beam Hook Size Range: 3/8"-16 and 1/2"-13 rod Material: Steel Function: Designed for attaching hanger rod to the top flange of a beam or angle truss. The support rod completes assembly and secures it to the flange. Finish: Plain or Electro-Galvanized Order By: Part number flange width, flange thickness and finish. Steel Size A (Rod Size) Hanger Rod W Not Included Allows 1/8" (3.2) clearance between hanger rod and flange of beam. Part No. B3042-3/8 B3042-1/2 A 3/8"-16 1/2"-13 For Pipe Size in. (mm) 3/4"-2" (20-50) 21/2"-31/2" (65-90) Design Load Lbs. (kN) 300 (1.33) 500 (2.22) Part No. B3042-3/8 B3042-1/2 4" (101.6) 47 (21.3) 65 (29.5) Approximate Wt./100 Lbs. (kg) For Width of Beam Flange 'W' 6" (152.4) 8" (203.2) 62 (28.1) 72 (32.6) 86 (39.0) 105 (47.6) 12" (304.8) 108 (49.0) 146 (66.2) B3045 - Side Beam Clamp Size Range: 3/8"-16 thru 7/8"-9 rods 3" (76.2mm) thru 9" (228.6mm) flange widths Material: Steel Function: Designed for attaching hanger rod to the side of a beam flange. Works on top or bottom of beam. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 53 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 25. Finish: Plain or Electro-Galvanized Order By: Part number, flange width and thickness, and finish. A (Rod Size) Hanger Rod Not Included Bolt and Nut Included B Part No. B3045-3/8 B3045-1/2 B3045-5/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 B in. (mm) 21/16" (52.4) 25/16" (58.7) 27/16" (61.9) Flange Width in. (mm) 3" - 9" (76.2 - 228.6) 3" - 9" (76.2 - 228.6) 3" - 9" (76.2 - 228.6) Design Load Lbs. (kN) 300 (1.33) 500 (2.22) 700 (3.11) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 44 B-Line series Pipe Hangers & Supports B3042T - Bar Joist Hanger Size Range: 3/8"-16 and 1/2"-13 rod Material: Steel Function: Designed to hook on top chord of metal bar joist. Hanger rod is threaded into product and secured with a washer and nut. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) for up to 4" (100mm) pipe with 3/8"-16 rod, up to 6" (150mm) pipe with 1/2"-13 rod. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, width and thickness of bar joist, and finish. Beam Clamps Part No. B3042T-3/8 B3042T-1/2 Rod Size Size 3/8"-16 1/2"-13 For Pipe Size in. (mm) Up to 4" (up to 100) 6" (150) Design Load Lbs. (kN) 300 (1.33) 600 (2.67) Approx. Wt./100 Lbs. (kg) 50.6 (22.9) 50.0 (22.7) Beam Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 45 Eaton Beam Clamps TOLCOTM Fig. 130 - Trus Joist Beam Clamp Size Range: 130-1 = TJI 230 or equivalent 130-2 = TJI S31 or equivalent 130-3 = TJI 110 or equivalent 130-4 = TJI 560 or equivalent 130-5 = TJI 560 or equivalent 130-6 = �� Material: Steel Function: Designed for attachment to trus joist beams. Use with B3210 Series eye rods. Approvals: Sizes 1 - 6 are Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) list through 4" (100mm) pipe. All Fig. 130 Beam Clamps meet requirements of Factory Mutual Engineering and NFPA 13, through 4" (100mm) pipe. Finish: Electro-Galvanized or Hot-Dip Galvanized Order By: Part number and finish. W AH Hardware Included 1" (25.4) 1/8" (3.2) 2" (50.8) 3/8" 3/4" Material Thickness (9.5) (19.0) 11 Gauge (3.0) Beam Clamps Part No. 130-1 130-2 130-3 130-4 130-5 130-6 Hardware Size 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 A in. (mm) 31/4" (82.5) 31/2" (88.9) 31/4" (82.5) 31/2" (88.9) 35/8" (92.1) 41/2" (114.3) H in. (mm) 11/2" (38.1) 13/4" (44.4) 11/2" (38.1) 11/2" (38.1) 13/4" (44.4) 21/2" (63.5) W in. (mm) 25/16" (58.7) 21/2" (63.5) 13/4" (44.4) 31/2" (88.9) 31/2" (88.9) 37/8" (98.4) Approx. Wt./100 Lbs. (kg) 65 (29.5) 70 (31.7) 58 (26.3) 83 (37.6) 86 (39.0) 101 (45.8) `H' and `W' are beam dimensions. * Maximum Recommended Load 500 Lbs. (2.22kN) Safety Factor of 5 Larger bolts and I-rods are required for 5" (125mm) and 6" (150mm) pipe sizes Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 46 B-Line series Pipe Hangers & Supports Beam Clamps Beam Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 47 Eaton Pipe Hangers Pipe Hangers Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials Carbon Steel, Malleable Iron and AISI Type 304 & 316 Stainless Steel are used in the manufacturing of pipe hangers. Other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black, Electro-Galvanized Zinc (ASTM B633 SC3), Pre-Galvanized (ASTM A653 G90), Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREENTM, DURA-COPPERTM and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes i.e. Hot-Dip Galvanized, DURA GREEN, DURA-COPPER, PVC etc. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, DURA-COPPER Painted or Stainless Steel. Consult customer service for availability. Approvals (as noted) Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 48 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 1CBS - Clevis Pipe Spacer Size Range: Size 1" (25mm) thru 20" (500mm) clevis hanger Material: Steel Function: Used as a spacer at a seismic brace location to keep clevis hanger from collapsing during seismic event. Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the Seismic Restraint Systems Guidelines. Installation Note: Fig. 1CBS fits easily over the cross bolt and attaches by pinching tabs down. Finish: Pre-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Pipe Hangers Component of State of California OSHPD Approved Seismic Restraints System Pipe Hangers Part No. 1CBS-1 1CBS-11/4 1CBS-11/2 1CBS-2 1CBS-21/2 1CBS-3 1CBS-31/2 1CBS-4 1CBS-5 1CBS-6 1CBS-8 1CBS-10 1CBS-12 1CBS-14 1CBS-16 1CBS-18 1CBS-20 Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) Approx. Wt./100 lbs. (kg) 3.2 (1.4) 4.1 (1.8) 4.8 (2.2) 9.4 (4.2) 11.4 (5.2) 13.9 (6.8) 16.0 (7.2) 18.0 (8.1) 27.3 (12.4) 32.5 (14.7) 42.5 (19.2) 72.7 (32.9) 86.3 (39.1) 157.6 (71.5) 183.7 (83.3) 224.6 (101.9) 254.0 (115.2) Sizes 1" (25) thru 11/2" (40) Sizes 2" (50) thru 20" (500) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 49 Eaton Pipe Hangers B3100 - Standard Clevis Hanger SLIDE-RITETM Clevis Hanger Features Pipe will not `pinch' when installing. 15� swing in either direction allows pipe to easily feed thru. E Engineered design aligns bolt holes for quicker overhead installation. *SLIDE-RITE Clevis Hanger D design, as shown below, for sizes 2, 21/2, 3, 4, 5 & 6. Pat. No. 5,848,770 5,924,655 A (Rod Size) Hanger Rod Not Included C Component of State of California OSHPD Approved Seismic Restraints System B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. E Minimum thread length of hanger rod F Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. B Pipe Hangers Part No. B3100-1/2 B3100-3/4 B3100-1 B3100-11/4 B3100-11/2 B3100-2 * B3100-21/2 * B3100-3 * B3100-31/2 B3100-4 * B3100-5 * B3100-6 * B3100-8 B3100-10 B3100-12 B3100-14 B3100-16 B3100-18 B3100-20 B3100-24 B3100-30 B3100-36 Nominal Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Rod Size A Std NFPA** 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 3/8"-16 1/2"-13 3/8"-16 1/2"-13 3/8"-16 5/8"-11 3/8"-16 5/8"-11 1/2"-13 3/4"-10 1/2"-13 3/4"-10 1/2"-13 7/8"-9 5/8"-11 7/8"-9 5/8"-11 1"-8 -- 1"-8 -- 1"-8 -- 11/4"-7 -- 11/4"-7 -- 11/4"-7 -- 11/4"-7 -- B in. (mm) 21/8" (54.0) 21/2" (63.5) 27/8" (73.0) 31/2" (88.9) 4" (101.6)` 41/2" (114.3) 53/8" (136.5) 61/2" (165.1) 71/4" (184.1) 73/4" (196.8) 83/4" (222.2) 105/16" (261.9) 123/4" (323.8) 151/8" (384.2) 171/2" (444.5) 193/8" (492.1) 213/8" (542.9) 25" (635.0) 283/4" (730.2) 323/4" (831.8) 3915/16" (1014.4) 46" (1168.4) C in. (mm) 13/4" (44.4) 2" (50.8) 21/4" (57.1) 211/16" (68.2) 31/16" (77.8) 35/16" (84.1) 315/16" (100.0) 43/4" (120.6) 51/4" (133.3) 51/2" (139.7) 61/8" (155.6) 615/16" (176.2) 87/16" (214.3) 93/4" (247.6) 111/8" (282.6) 123/8" (314.3) 133/8" (339.7) 16" (406.4) 173/4" (450.8) 193/4" (501.6) 2415/16" (633.4) 28" (711.2) **Note: Do not use the dimensions shown in the B3100 chart for NFPA hanger sizes. Contact customer service for NFPA rod sizing on 1/2" (15mm) thru 12" (300mm) pipe. Part numbers will be 1NFPA-pipe size. D in. (mm) 15/16" (23.8) 11/8" (28.6) 13/8" (34.9) 113/16" (46.0) 21/4" (57.1) 21/2" (63.5) 31/16" (77.8) 315/16" (100.0) 41/16" (103.2) 51/2" (139.7) 6" (152.4) 7" (177.8) 71/8" (181.0) 83/8" (212.7) 911/16" (246.1) 105/8" (269.9) 119/16" (293.7) 143/16" (360.3) 165/8" (422.3) 185/8" (473.1) 223/4" (577.8) 25" (635.0) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 50 B-Line series Pipe Hangers & Supports Pipe Hangers B3100 - Standard Clevis Hanger Size Range: 1/2" (15mm) to 36" (900mm) Component of State of California OSHPD Approved Seismic Restraints System Material: Steel Function: Recommended for the suspension of non-insulated pipe or insulated pipe with a B3151 shield. Note: When an oversized clevis is used, a pipe spacer should be placed over the cross bolt to assure that the lower U-strap will not move in on the bolt. When attaching seismic bracing to the clevis hangers, a Fig. 1CBS (cross bolt spacer) must be installed. See Seismic Restraints Approval Guidelines. Order pipe sleeves Fig. 1CBS-(pipe size) separately. Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the B-Line/TOLCO Seismic Restraint Systems Guidelines. Underwriter's Laboratories Listed in the USA (UL) and Canada (cUL) for sizes 3/4" (20mm) thru 12" (300mm). Factory Mutual Engineering Approved (FM) for 3/4" (20mm) thru 12" (300mm) pipe. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 1 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Also available to accommodate rod schedule per National Fire Protection Association (NFPA) Pamphlet 13. Maximum Temperature: 650�F (343�C). Standard Finish: Plain, Electro-Galvanized, DURA GREENTM, or Hot-Dip Galvanized also available in Stainless Steel Order By: Part number and finish. For AWWA - Ductile Iron Clevis Hangers, see B3102, page 53. Pipe Hangers Part No. B3100-1/2 B3100-3/4 B3100-1 B3100-11/4 B3100-11/2 B3100-2 * B3100-21/2 * B3100-3 * B3100-31/2 B3100-4 * B3100-5 * B3100-6 * B3100-8 B3100-10 B3100-12 B3100-14 B3100-16 B3100-18 B3100-20 B3100-24 B3100-30 B3100-36 E in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 4" (101.6) 4" (101.6) 41/2" (114.3) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0 Adjustment F in. (mm) 7/16" (11.1) 1/2" (12.7) 5/8" (15.9) 7/8" (22.2) 13/16" (30.2) 15/8" (41.3) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 25/16" (58.7) 25/16" (58.7) 25/8" (66.7) 27/8" (73.0) 211/16" (68.3) 315/16" (100.0) 53/8" (136.5) 53/8" (136.5) 61/4" (158.7) 57/16" (138.1) Design Load Lbs. (kN) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 1350 (6.00) 1350 (6.00) 1350 (6.00) 1430 (6.36) 1430 (6.36) 1940 (8.63) 2000 (8.89) 3600 (16.01) 3800 (16.90) 4200 (18.68) 4600 (20.46) 4800 (21.35) 4800 (21.35) 4800 (21.35) 6000 (26.69) 6000 (26.69) *SLIDE-RITETM Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6. Approx. Wt./100 Lbs. (kg) 25 (11.3) 29 (13.1) 35 (15.9) 40 (18.1) 42 (19.0) 52 (23.6) 90 (40.8) 110 (49.9) 142 (64.4) 132 (59.9) 215 (97.5) 320 (145.1) 485 (220.0) 846 (383.7) 1083 (491.2) 1432 (649.5) 2200 (997.9) 2500 (1134.0) 4400 (1995.8) 5000 (2268.0) 6600 (2993.7) 8474 (3843.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 51 Eaton Pipe Hangers B3100C - Standard Clevis Hanger - Plastic Coated B3100F - Standard Clevis Hanger - Felt Lined for Copper Tubing Size Range: 1/2" (15mm) to 8" (200mm) pipe Material: Steel Insulation Material: 1/8" (3.2mm) Felt E Service: The B3100F is designed for the suspension of copper tube so as to prevent electrolysis between tubing and hanger. The B3100C is designed for steel or other pipe types of the same O.D. Both B3100F and B3100C D act to reduce noise and vibration in pipe or tubing systems. Approvals: Underwriter's Laboratories Listed in the USA (UL) and Canada (cUL). Maximum Temperature: 650�F (343�C). Standard Finish: Plain, Electro-Galvanized, or Hot-Dip Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. A (Rod Size) Hanger Rod Not Included B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. C B E Minimum thread length of hanger rod F Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Pipe Hangers Part No. B3100-1/2 B3100-3/4 B3100-1 B3100-11/4 B3100-11/2 B3100-2 B3100-21/2 B3100-3 B3100-31/2 B3100-4 B3100-5 B3100-6 B3100-8 Part No. B3100-1/2 B3100-3/4 B3100-1 B3100-11/4 B3100-11/2 B3100-2 B3100-21/2 B3100-3 B3100-31/2 B3100-4 B3100-5 B3100-6 B3100-8 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) E in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 Adjustment F in. (mm) 7/16" (11.1) 1/2" (12.7) 5/8" (15.9) 7/8" (22.2) 13/16" (30.2) 15/8" (41.3) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 25/16" (58.7) B in. (mm) 21/8" (54.0) 27/16" (61.9) 213/16" (71.4) 37/16" (87.3) 4" (101.6)` 41/2" (114.3) 59/16" (141.3) 63/4" (171.4) 7" (177.8) 713/16" (198.4) 91/16" (230.2) 107/16" (265.1) 123/4" (323.8) C in. (mm) 111/16" (42.9) 17/8" (47.6) 21/8" (54.0) 29/16" (65.1) 3" (76.2) 31/4" (82.5) 4" (101.6) 47/8" (123.8) 5" (127.0) 51/2" (139.7) 61/8" (155.6) 615/16" (176.2) 83/8" (212.7) D in. (mm) 15/16" (23.8) 11/8" (28.6) 13/8" (34.9) 113/16" (46.0) 21/4" (57.1) 21/2" (63.5) 31/16" (77.8) 315/16" (100.0) 41/16" (103.2) 43/8" (111.1) 5" (127.0) 511/16" (144.5) 71/8" (181.0) Design Load Lbs. (kN) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 1350 (6.00) 1350 (6.00) 1350 (6.00) 1430 (6.36) 1430 (6.36) 1940 (8.63) 2000 (8.89) Approx. Wt./100 Lbs. (kg) 25 (11.3) 29 (13.1) 35 (15.9) 40 (18.1) 42 (19.0) 52 (23.6) 90 (40.8) 110 (49.9) 142 (64.4) 132 (59.9) 215 (97.5) 320 (145.1) 485 (220.0) B3100C B3100F Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 52 B-Line series Pipe Hangers & Supports B3102 - A.W.W.A. Clevis Hanger Size Range: 4" (100mm) to 24" (600mm) Material: Steel Function: Recommended for the suspension of E flanged or bell and spigot A.W.W.A. cast iron or ductile iron pipe. The O.D. of the A.W.W.A. iron pipe is shown in the data table. Approvals: Conforms to Federal Specification D WW-H-171E & A-A-1192A, Type 1 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Maximum Temperature: 650�F (343�C). Standard Finish: Plain & Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Pipe Hangers A (Rod Size) Hanger Rod Not Included C B B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. E Minimum thread length of hanger rod F Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Part No. B3102-4 B3102-6 B3102-8 B3102-10 B3102-12 B3102-14 B3102-16 B3102-18 B3102-20 B3102-24 Pipe O.D. in. (mm) 4.80 (121.9) 6.90 (175.2) 9.05 (229.9) 11.10 (281.9) 13.20 (335.3) 15.30 (388.6) 17.40 (441.9) 19.50 (495.3) 21.60 (548.6) 25.80 (655.3) Rod Size A 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 11/4"-7 11/4"-7 B in. (mm) 85/16" (211.1) 105/8" (269.9) 131/4" (336.5) 157/8" (403.2) 18" (457.2) 203/8" (517.5) 231/2" (569.9) 255/8" (650.9) 291/2" (749.3) 33" (838.2) C in. (mm) 513/16" (147.6) 71/16" (179.4) 85/8" (219.1) 101/4" (260.3) 115/16" (287.3) 125/8" (320.7) 1411/16" (373.1) 153/4" (400.0) 189/16" (471.5) 191/8" (508.0) D in. (mm) 45/8" (117.5) 513/16" (147.6) 73/16" (182.5) 811/16" (220.6) 93/4" (247.6) 113/16" (281.6) 127/8" (327.0) 1315/16" (354.0) 177/16" (442.9) 20" (485.8) E in. (mm) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 4" (101.6) 4" (101.6) 41/2" (114.3) 5" (127.0) 5" (127.0) F Design Load in. (mm) Lbs. (kN) 2" (50.8) 1430 (6.36) 2" (50.8) 1940 (8.63) 21/8" (54.0) 2000 (8.89) 21/4" (57.1) 3600 (16.01) 21/4" (57.1) 3800 (16.90) 27/8" (73.0) 4200 (18.68) 33/8" (85.7) 4600 (20.46) 33/8" (85.7) 4800 (21.35) 413/16" (122.2) 4800 (21.35) 51/4" (133.3) 4800 (21.35) Approx. Wt./100 Lbs. (kg) 203 (92.1) 352 (159.6) 532 (241.3) 800 (362.9) 1152 (522.5) 1449 (657.2) 2100 (952.6) 2294 (1040.5) 3887 (1763.1) 4844 (2197.2) Pipe Hangers All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 53 Eaton Pipe Hangers B3108 - Extended Clevis Hanger Size Range: 3/4" (20mm) thru 12" (300mm) pipe Material: Steel Function: Recommended for the suspension of insulated pipe where the temperature does not require the use of slides, guides, or rollers for movement. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 1 and Manufacturers Standardization E Society ANSI/MSS SP-69 & SP-58, Type 1. Maximum Temperature: 650�F (343�C). Order By: Part number and finish. D Standard Finish: Plain, Electro-Galvanized or Hot Dip Galvanized For service temperatures of 750�F (399�C) thru 1050�F (565�C) specify Type 304 Stainless Steel A (Rod Size) Hanger Rod Not Included C B B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. E Minimum thread length of hanger rod. F Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. H Maximum insulation thickness. Part No. B3108-3/4 B3108-1 B3108-11/4 B3108-11/2 B3108-2 B3108-21/2 B3108-3 B3108-4 B3108-5 B3108-6 B3108-8 B3108-10 B3108-12 Nominal Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 B in. (mm) 43/8" (111.1) 43/4" (120.6) 53/8" (136.5) 67/8" (174.6) 813/16" (223.8) 10" (254.0) 105/8" (269.9) 1113/16" (300.0) 131/8" (333.4) 143/8" (365.1) 163/4" (425.4) 191/4" (488.9) 215/8" (549.3) C in. (mm) 313/16" (96.8) 41/16" (103.2) 41/2" (114.3) 515/16" (150.8) 75/8" (193.7) 81/2" (215.9) 813/16" (223.8) 91/2" (241.3) 105/16" (261.9) 11" (279.5) 123/8" (314.3) 1313/16" (350.8) 153/16" (385.8) D in. (mm) 31/16" (77.8) 31/4" (82.5) 35/16" (84.1) 51/8" (130.2) 67/8" (174.6) 79/16" (192.1) 77/8" (200.0) 83/8" (212.7) 91/8" (231.8) 911/16" (246.0) 111/8" (282.6) 125/16" (312.7) 135/8" (346.1) Part No. B3108-3/4 B3108-1 B3108-11/4 B3108-11/2 B3108-2 B3108-21/2 B3108-3 B3108-4 B3108-5 B3108-6 B3108-8 B3108-10 B3108-12 E in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) F in. (mm) 1/2" (12.7) 5/8" (15.9) 7/8" (22.2) 13/16" (30.2) 15/8" (41.3) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 25/16" (58.7) 25/16" (58.7) 25/8" (66.7) H in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) Design Load lbs. (kN) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 730 (3.25) 1350 (6.00) 1350 (6.00) 1430 (6.36) 1430 (6.36) 1940 (8.63) 2000 (8.89) 3600 (16.01) 3800 (16.90) Approx. Wt./100 lbs. (kg) 45 (20.4) 49 (22.2) 55 (24.9) 67 (30.4) 83 (37.6) 177 (80.3) 191 (86.6) 237 (107.5) 302 (137.0) 397 (180.1) 582 (264.0) 968 (439.1) 1221 (553.8) Pipe Hangers Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 54 B-Line series Pipe Hangers & Supports B3690 - J-Hanger for Pipe or Conduit B3690F - Felt Lined J-Hanger for Copper Tubing B3690C - PVC Coated J-Hanger for Pipe or Conduit Size Range: 1/2" (15mm) to 10" (250mm) pipe size Material: Steel Function: Recommended for the suspension of non-insulated pipe, or insulated pipe with B3151 shield. Side hole allows for wall mounting. B3690F and B3690C are designed to reduce noise and vibration and/or prevent electrolysis between pipe and hanger. Approvals: Conforms Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 5. Standard Finish: Electro-Plated. Contact customer service for alternative finishes and materials. Order By: Part number and finish. A (Rod Size) Hanger Rod Not Included D Dia. E F B Pipe Hangers B Center of pipe to top of hanger. F Rod Take-Out Center of pipe to bottom of hanger rod. C Pipe Hangers B3690F B3690C Part No. B3690-1/2 B3690-3/4 B3690-1 B3690-11/4 B3690-11/2 B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 B3690-6 B3690-8 B3690-10 Nominal Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) Rod Size B A in. (mm) 3/8"-16 25/8" (66.7) 3/8"-16 27/8" (73.0) 3/8"-16 215/16" (74.6) 3/8"-16 31/4" (82.5) 3/8"-16 39/16" (90.5) 3/8"-16 311/16" (93.7) 1/2"-13 47/16" (112.7) 1/2"-13 413/16" (122.2) 1/2"-13 51/8" (130.2) 5/8"-11 61/8" (155.6) 5/8"-11 63/4" (171.4) 3/4"-10 73/4" (196.8) 7/8"-9 93/16" (233.4) 7/8"-9 103/4" (273.0) C in. (mm) 13/4" (44.4) 17/8" (47.6) 115/16" (49.2) 2" (50.8) 23/16" (55.6) 21/8" (54.0) 27/16" (61.9) 29/16" (65.1) 25/8" (66.7) 33/16" (81.0) 31/4" (82.5) 39/16" (90.5) 315/16" (100.0) 37/8" (98.4) D in. (mm) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) E in. (mm) 11/2" (38.1) 111/16" (42.9) 113/16" (46.0) 21/16" (52.4) 27/16" (61.9) 29/16" (65.1) 33/16" (81.0) 31/2" (88.9) 33/4" (95.2) 45/8" (117.5) 51/16" (128.6) 513/16" (147.6) 615/16" (176.2) 75/8" (193.7) F in. (mm) 115/16" (49.2) 21/8" (54.0) 25/16" (58.7) 25/8" (66.7) 27/8" (73.0) 31/16" (77.8) 35/8" (92.1) 41/16" (103.2) 43/8" (111.1) 53/16" (131.8) 53/4" (146.0) 65/8" (168.3) 8" (203.3) 91/8" (231.8) Design Load Lbs. (kN) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 500 (2.22) 500 (2.22) 500 (2.22) 550 (2.44) 550 (2.44) 600 (2.67) 760 (3.38) 760 (3.38) Approx. Wt./100 Lbs. (kg) 18 (8.1) 21 (9.5) 22 (10.0) 25 (11.3) 27 (12.2) 29 (13.1) 64 (29.0) 72 (32.6) 84 (38.1) 138 (62.6) 162 (73.5) 249 (112.9) 291 (132.0) 315 (142.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 55 Eaton Pipe Hangers B3109 - Flat Top Clevis Hanger Size Range: 2" (50mm) to 8" (200mm) pipe size Material: Steel Function: Recommended for suspending noninsulated, stationary pipe where space is limited. Approvals: Complies with Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 Type 1. Standard Finish: Plain or Electro-Galvanized Order By: Part number and finish. A (Rod Size) Hanger Rod Not Included C B D B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. Pipe Hangers Part No. B3109-2 B3109-21/2 B3109-3 B3109-31/2 B3109-4 B3109-5 B3109-6 B3109-8 Nominal Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Part No. B3109-2 B3109-21/2 B3109-3 B3109-31/2 B3109-4 B3109-5 B3109-6 B3109-8 C in. (mm) 25/8" (66.7) 33/16" (81.0) 39/16" (90.5) 313/16" (96.8) 41/4" (107.9) 5" (127.0) 511/16" (144.5) 7" (177.8) Rod Size A 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 B in. (mm) 313/16" (96.8) 45/8" (117.5) 55/16" (134.9) 513/16" (147.6) 61/2" (165.1) 713/16" (198.4) 97/16" (230.2) 113/8" (288.9) Rod Take-Out D in. (mm) 17/8" (47.6) 23/16" (55.6) 25/8" (66.7) 27/8" (73.0) 31/8" (79.4) 37/8" (98.4) 47/16" (112.7) 513/16" (147.6) Design Load Lbs. (kN) 300 (1.33) 500 (2.22) 500 (2.22) 500 (2.22) 700 (3.11) 700 (3.11) 900 (4.00) 1000 (4.45) Approx. Wt./100 Lbs. (kg) 52 (23.6) 116 (52.6) 133 (60.3) 145 (65.8) 180 (81.6) 248 (112.5) 332 (150.6) 513 (232.7) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 56 B-Line series Pipe Hangers & Supports B3106 - Vee Bottom Clevis Hanger Size Range: 1/2" (15mm) to 4" (100mm) pipe Material: Steel Function: Recommended for the suspension of flexible plastic pipe. Use with B3106V support trough for plastic pipe. Approvals: Complies with Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 B Type 1. Standard Finish: Plain & Electro-Galvanized. Contact customer service for alternative finishes D and materials. Order By: Part number and finish. Pipe Hangers A (Rod Size) Hanger Rod Not Included B Overall Height C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. E Minimum thread length of hanger rod. C Part No. B3106-2 B3106-4 Nominal Pipe Size in. (mm) 1/2" to 2" (15 to 50) 21/2" to 4" (65 to 100) Rod Size A 3/8"-16 1/2"-13 B in. (mm) 515/16" (150.8) 93/8" (238.1) C in. (mm) 41/16" (103.2) 6" (152.4) Part No. B3106-2 B3106-4 Rod Take-Out D in. (mm) 35/16" (84.1) 413/16" (122.2) Adjustment E in. (mm) 15/8" (41.3) 23/16" (55.6) Design Load Lbs. (kN) 150 (.67) 150 (.67) Approx Wt./100 Lbs. (kg) 60 (27.2) 143 (64.8) Pipe Hangers B3106V - Plastic Pipe Support Channel Size Range: 1/2" (15mm) to 4" (100mm) pipe Material: Steel Function: Designed for use with B3106 as a support for plastic or other flexible pipe systems. Standard Finish: Pre-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. T x L Steel Size B Part No. B3106V-2 B3106V-4 For Nominal Pipe Sizes in. (mm) 1/2" to 2" (15 to 50) 21/2" to 4" (65 to 100) Steel Size T x L in. (mm) 18 Ga. x 96" (1.2 x 2438.4) 18 Ga. x 120" (1.2 x 3048.0) B in. (mm) 19/16" (39.7) 31/8" (79.4) Maximum Hanger Spacing Ft. (M) 8 (2.44) 10 (3.05) Design Load Lbs. (kN) 150 (.67) 150 (.67) Approx. Wt./100 Lbs. (kg) 449 (203.6) 1123 (509.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 57 Eaton Pipe Hangers B3104 - Light-Duty Clevis Hanger B3104F - Light-Duty Clevis Hanger - Felt Lined B3104C - Light-Duty Clevis Hanger - PVC Coated Size Range: 1/2" (15mm) to 4" (100mm) pipe Material: Steel Function: Recommended for the suspension of light stationary pipe allowing for vertical adjustment. Approvals: Underwriter's Laboratories Listed in the USA (UL) and Canada (cUL) for sizes 3/4" (20mm) thru 4" (100mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 12 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Standard Finish: Plain, ElectroGalvanized, or DURA-GREENTM Order By: Part number and finish. A (Rod Size) Hanger Rod Not Included E D C B *Slide-RiteTM Clevis Hanger design for sizes 2, 3 & 4. Pat. No. 5,848,770 5,924,655 B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. E Minimum thread length of hanger rod. F Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Pipe Hangers Part No. B3104-1/2 B3104-3/4 B3104-1 B3104-11/4 B3104-11/2 B3104-2 * B3104-21/2 B3104-3 * B3104-31/2 B3104-4 * Nominal Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 B in. (mm) 115/16" (49.2) 25/16" (58.7) 23/4" (69.8) 35/16" (84.1) 35/8" (92.1) 413/16" (122.2) 513/16" (147.6) 67/16" (163.5) 615/16" (176.2) 73/4" (196.8) C in. (mm) 11/2" (38.1) 13/4" (44.4) 21/16" (52.4) 27/16" (61.9) 25/8" (66.7) 35/8" (92.1) 45/16" (109.5) 45/8" (117.5) 415/16" (125.4) 51/2" (139.7) Part No. B3104-1/2 B3104-3/4 B3104-1 B3104-11/4 B3104-11/2 B3104-2 * B3104-21/2 B3104-3 * B3104-31/2 B3104-4 * Rod Take-Out D in. (mm) 13/16" (20.6) 1" (25.4) 13/8" (34.9) 13/4" (44.4) 2" (50.8) 215/16" (74.6) 37/16" (87.3) 33/4" (95.2) 4" (101.6) 49/16" (115.9) E in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) Adjustment F in. (mm) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 13/16" (20.6) 1" (25.4) 13/4" (44.4) 2" (50.8) 2" (50.8) 2" (50.8) 23/16" (55.6) Design Load Lbs. (kN) 150 (.67) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 350 (1.55) 350 (1.55) 350 (1.55) 400 (1.78) Approx. Wt./100 Lbs. (kg) 13 (5.9) 22 (10.0) 24 (10.9) 29 (13.1) 30 (13.6) 35 (15.9) 82 (37.2) 91 (41.3) 98 (44.4) 132 (59.9) B3104C B3104F Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 58 B-Line series Pipe Hangers & Supports B3104CT - Clevis Hanger B3104CTC - Clevis Hanger - PVC Coated Size Range: 1/2" (15mm) to 6" (150mm) copper tubing Material: Steel Function: Recommended for the suspension of E non- insulated stationary copper tubing lines. Available with plastic coating to provide additional separation between tubing and hanger. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 12 and D Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Standard Finish: DURA-COPPERTM Order By: Part number and finish. Pipe Hangers A (Rod Size) Hanger Rod Not Included C B B Bottom of pipe to top of hanger. C Center of pipe to top of hanger. D Rod Take-Out Center of pipe to bottom of hanger rod. E Minimum thread length of hanger rod. F Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Pipe Hangers Part No. B3104CT-1/2 B3104CT-3/4 B3104CT-1 B3104CT-11/4 B3104CT-11/2 B3104CT-2 B3104CT-21/2 B3104CT-3 B3104CT-31/2 B3104CT-4 B3104CT-5 B3104CT-6 Part No. B3104CT-1/2 B3104CT-3/4 B3104CT-1 B3104CT-11/4 B3104CT-11/2 B3104CT-2 B3104CT-21/2 B3104CT-3 B3104CT-31/2 B3104CT-4 B3104CT-5 B3104CT-6 B3104CTC B3104CT Tubing Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) E in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 B in. (mm) 21/4" (57.1) 115/16" (49.2) 25/16" (58.7) 23/4" (69.8) 35/16" (84.1) 41/2" (114.3) 511/16" (144.5) 53/16" (131.8) 61/2" (165.1) 73/8" (187.3) 9" (228.6) 105/16" (261.9) C in. (mm) 115/16" (49.2) 11/2" (38.1) 13/4" (44.4) 21/16" (52.4) 27/16" (61.9) 37/16" (87.3) 41/2" (114.3) 35/8" (92.1) 49/16" (115.9) 35/16" (134.9) 67/16" (163.5) 71/4" (184.1) Rod Take-Out D in. (mm) 11/8" (28.6) 11/8" (28.6) 15/16" (33.3) 19/16" (39.7) 21/16" (52.4) 33/8" (85.7) 315/16" (100.0) 4" (101.6) 41/8" (104.8) 43/8" (111.1) 53/4" (146.0) 61/2" (165.1) Adjustment F in. (mm) 3/8" (9.5) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 15/16" (23.8) 13/4" (44.4) 21/8" (54.0) 21/16" (52.4) 21/8" (54.0) 21/8" (54.0) 21/2" (63.5) 3" (76.2) Design Load Lbs. (kN) 150 (.67) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 350 (1.55) 350 (1.55) 350 (1.55) 400 (1.78) 550 (2.44) 550 (2.44) Approx. Wt./100 Lbs. (kg) 12 (5.4) 12 (5.4) 22 (10.0) 24 (10.9) 30 (13.6) 35 (15.9) 80 (36.3) 88 (39.9) 94 (42.6) 116 (52.6) 208 (94.3) 247 (112.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 59 Eaton Pipe Hangers B3170CT - Adjustable Swivel Hanger for Copper Tubing B3170CTC - Adjustable Swivel Hanger for Copper Tubing - Plastic Coated Size Range: 1/2" (15mm) thru 6" (150mm) copper tubing Material: Steel Function: Recommended for the suspension of copper tubing, allowing for vertical adjustment. (Available with plastic coating to provide additional separation between tubing and hanger.) Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 10 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 10. Standard Finish: DURA-COPPERTM Order By: Part number and finish. B Center of pipe to top of knurled hanger rod nut. C Rod Take-Out Center of pipe to bottom of hanger rod. D D B Top of pipe to bottom of hanger rod nut. A (Rod Size) Hanger Rod Not Included C Part No. B3170CT-1/2 B3170CT-3/4 B3170CT-1 B3170CT-11/4 B3170CT-11/2 B3170CT-2 B3170CT-21/2 B3170CT-3 B3170CT-31/2 B3170CT-4 B3170CT-5 B3170CT-6 Nominal Pipe Size 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 B in. (mm) 21/16" (52.4) 25/16" (58.7) 21/2" (63.5) 21/2" (63.5) 215/16" (74.6) 31/8" (79.4) 41/16" (103.2) 315/16" (100.0) 47/16" (112.7) 411/16" (119.1) 515/16" (150.8) 611/16" (169.9) C in. (mm) 11/8" (28.6) 15/16" (33.3) 19/16" (39.7) 19/16" (39.7) 2" (50.8) 21/8" (54.0) 29/16" (65.1) 33/4" (95.2) 31/4" (82.5) 39/16" (89.6) 45/16" (109.5) 53/16" (131.8) D in. (mm) 31/32" (24.6) 11/32" (26.2) 15/32" (29.3) 1" (25.4) 15/16" (33.3) 13/16" (30.2) 13/8" (34.9) 11/4" (31.7) 11/2" (38.1) 19/16" (39.7) 125/32" (45.2) 21/8" (54.0) Part No. B3170CT-1/2 B3170CT-3/4 B3170CT-1 B3170CT-11/4 B3170CT-11/2 B3170CT-2 B3170CT-21/2 B3170CT-3 B3170CT-31/2 B3170CT-4 B3170CT-5 B3170CT-6 Max. Rec. Load lbs. (kN) 180 (0.80) 180 (0.80) 180 (0.80) 180 (0.80) 180 (0.80) 180 (0.80) 200 (0.89) 250 (1.11) 300 (1.33) 360 (1.60) 480 (2.13) 630 (2.80) Approx. Wt./100 lbs. (kg) 8 (6.6) 10 (4.5) 10 (4.5) 12 (5.4) 12 (5.4) 12 (5.4) 31 (24.0) 33 (14.9) 39 (17.2) 40 (18.1) 95 (43.1) 118 (53.5) B3170CT B3170CTC Pipe Hangers Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 60 B-Line series Pipe Hangers & Supports Pipe Hangers TOLCOTM Fig. 200 - "Trimline" Adjustable Band Hanger TOLCOTM Fig. 200F - "Trimline" Adjustable Band Hanger with Felt Lining for Copper Tubing TOLCOTM Fig. 200C - "Trimline" Adjustable Band Hanger with Plastic Coated TOLCOTM Fig. 200S - "Trimline" Adjustable Band Hanger with Removable Nut (For sizes 1" thru 2") Size Range: Fig. 200 - 1/2" (15mm) thru 8" (200mm) pipe Material: Steel, Pre-Galvanized to G90 specifications Function: For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Features: � 1/2" (15mm) thru 2" (50mm) sizes have flared edges for ease of installation on all pipe types and protects CPVC plastic pipe from abrasion. Captured knurled nut design (flared top) on 1" thru 2" sizes keep nut from separating with hanger. Hanger is easily installed around pipe. � 1/2" (15mm), 3/4" (20mm), and 21/2" (65mm) thru 8" (200mm)) Spring tension on nut holds it securely in hanger before installation. Knurled nut is easily removed. � For 1/2" (15mm) and 3/4" (20mm) sizes with non-captured knurl nuts order Fig. 200S Approvals: Underwriters Laboratories listed (1/2" (15mm) thru 8" (200mm)) in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and Factory Mutual Engineering Approved (3/4" (20mm) thru 8" (200mm)). Conforms to Federal Specifications WW-H-171E & A-A-1192A, Type 10 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 10. Maximum Temperature: 650�F (343�C) Finish: Pre-Galvanized. Stainless Steel materials will be supplied with (2) hex nuts in place of a knurl nut. Order By: Part number and pipe size A Overall Height B Center of pipe to top of knurled hanger rod nut. D Top of pipe to bottom of hanger rod nut. Fig. 200-1/2 & 200-3/4 D Fig. 200-1 to 200-2 B A Fig. 200-21/2 to 200-8 ** Note: For metric hanger rod sizes add the metric rod size to the figure number. Example: 200M8-11/2 or 200M10-11/2 M8 rod size is not UL Listed or FM Approved Fig. 200C 200C-11/2 shown Fig. 200F 200F-11/2 shown Fig. 200 shown with captured nut 1" thru 2" sizes only Fig. 200 & Fig. 200S shown with non-captured nut Pipe Hangers Nominal Pipe Size Rod Size Part No.** in. (mm) in. mm** 200-1/2 200-3/4 200-1 200-11/4 200-11/2 200-2 200-21/2 200-3 200-31/2 200-4 200-5 200-6 200-8 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 M8 or M10 M8 or M10 M8 or M10 M8 or M10 M8 or M10 M8 or M10 M10 M10 M10 M10 M12 M12 M12 A in. (mm) 31/8" (79.4) 31/8" (79.4) 33/8" (85.7) 33/4" (94.0) 37/8" (98.4) 41/2" (114.3) 55/8" (142.9) 57/8" (149.1) 73/8" (187.3) 73/8" (187.3) 91/8" (231.8) 101/8" (257.2) 131/8" (333.4) B in. (mm) 25/8" (66.7) 21/2" (63.5) 25/8" (66.7) 27/8" (73.0) 27/8" (73.0) 3" (76.3) 41/8" (104.7) 4" (101.6) 51/4" (133.3) 5" (127.0) 61/4" (158.7) 63/4" (171.4) 83/4" (222.2) D in. (mm) 111/32" (34.1) 11/16" (27.0) 11/8" (28.6) 15/32" (29.3) 13/16" (30.2) 13/16" (30.2) 17/16" (36.5) 11/4" (31.7) 23/16" (55.6) 13/8" (34.9) 311/32" (84.9) 27/32" (56.3) 37/32" (81.7) Max. Rec. Load Approx. Wt./100 lbs. (kN) lbs. (kg) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 600 (2.67) 600 (2.67) 600 (2.67) 1000 (4.45) 1250 (5.56) 1250 (5.56) 1250 (5.56) 11 (5.0) 11 (5.0) 12 (5.5) 13 (5.9) 14 (6.4) 15 (6.9) 27 (12.3) 29 (13.3) 34 (15.6) 35 (16.0) 66 (30.2) 73 (33.4) 136 (62.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 61 Eaton Pipe Hangers TOLCOTM Fig. 200H - Heavy Duty Band Hanger (For Trapeze) Size Range: 2" (50mm) thru 4" (100mm) trapeze pipe size. Material: Steel -- Pre-Galvanized to G40 Spec Function: Designed primarily to support substantially heavier loads than is normally intended for the nominal hanger size. Used extensively to support trapeze installations and the increased loads from both above and below the trapeze assembly. Features: Furnished with 3/8"-16 or 1/2"-13 adjusting threaded ring nut. Approvals: Underwriters Laboratories listed in the USA (UL) and Canada (cUL). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 10 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 10. Maximum Temperature: 650�F (343�C) Finish: Pre-Galvanized Order By: Part number, pipe size and rod size. Important Design Note. Because of the increased loads applied to the trapeze assembly, both the upper trapeze supports as well as the lower hanging unit must be able to hold the maximum loads intended. If using metric rods the M8 rod size is not UL Listed B A Pipe Hangers Part No. 200H-2-3/8 200H-2-1/2 200H-21/2-3/8 200H-21/2-1/2 200H-3-3/8 200H-3-1/2 200H-4-3/8 200H-4-1/2 Pipe Size in. (mm) 2" (50) 2" (50) 21/2" (65) 21/2" (65) 3" (75) 3" (75) 4" (100) 4" (100) Rod Size 3/8"-16 1/2"-13 3/8"-16 1/2"-13 3/8"-16 1/2"-13 3/8"-16 1/2"-13 A in. (mm) 49/16" (115.9) 423/32" (119.8) 55/16" (134.9) 515/32" (138.9) 53/4" (146.0) 57/8" (148.1) 67/8" (174.6) 71/32" (178.6) B in. (mm) 37/32" (81.7) 33/8" (85.7) 323/32" (94.4) 37/8" (98.3) 327/32" (97.6) 331/32" (100.8) 47/16" (112.7) 419/32" (1116.7) Max. Rec. Load lbs. (kN) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) Note: Select trapeze pipe size based on section modulus required for span of trapeze per information provided in NFPA 13 (2002) Table 9.1.1.6.1 (a and b). All sizes are UL Listed to support up to 8" pipe at max spacing per NFPA 13. For 6" (150mm) and 8" (200mm) trapeze pipe, consult factory. Approx. Wt./100 lbs. (kg) 48 (21.8) 45 (20.4) 59 (26.7) 56 (25.4) 63 (28.6) 60 (27.2) 76 (34.5) 73 (33.1) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 62 B-Line series Pipe Hangers & Supports B3198H - Hinged Extension Split Pipe Clamp Size Range: 3/8" (10mm) to 3" (80mm) pipe Material: Malleable Iron C Function: Designed for suspending non-insulated pipe horizontally or vertically. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12. Standard Finish: Plain or Electro-Galvanized Order By: Part number and finish. Part No. B3198H-3/8 B3198H-1/2 B3198H-3/4 B3198H-1 B3198H-11/4 B3198H-11/2 B3198H-2 B3198H-21/2 B3198H-3 Pipe Size in. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 C in. (mm) 31/32" (24.6) 11/16" (27.0) 17/32" (30.9) 111/32" (34.1) 119/32" (39.7) 123/32" (43.6) 2" (50.8) 211/32" (59.5) 223/32" (69.0) Design Load Lbs. (kN) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 300 (1.33) 300 (1.33) Approx. Wt./100 Lbs. (kg) 9 (4.1) 12 (5.4) 12 (5.4) 13 (5.9) 18 (8.1) 21 (9.5) 44 (19.9) 73 (33.1) 95 (43.1) Pipe Hangers A (Rod Size) Hanger Rod Not Included B3198R - Extension Split Pipe Clamp Size Range: 3/8" (10mm) to 4" (100mm) pipe C Material: Malleable Iron Function: Designed for suspending non-insulated pipe horizontally or vertically. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12. Standard Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Part No. B3198R-3/8 B3198R-1/2 B3198R-3/4 B3198R-1 B3198R-11/4 B3198R-11/2 B3198R-2 B3198R-21/2 B3198R-3 B3198R-4 Pipe Size in. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) Rod Thread Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 C in. (mm) 31/32" (24.6) 11/16" (27.0) 17/32" (30.9) 111/32" (34.1) 119/32" (39.7) 123/32" (43.6) 2" (50.8) 211/32" (59.5) 223/32" (69.0) 311/32" (84.9) Design Load Lbs. (kN) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 300 (1.33) 300 (1.33) 300 (1.33) Approx. Wt./100 Lbs. (kg) 12 (5.4) 16 (7.2) 18 (8.1) 24 (10.9) 29 (13.1) 32 (14.5) 39 (17.7) 115 (52.1) 140 (63.5) 160 (72.6) A (Rod Size) Hanger Rod Not Included Pipe Hangers All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 63 Eaton Pipe Hangers B3198HCT - Hinged Extension Split Pipe Clamp Size Range: 1/2" (15mm) to 2" (50mm) copper tubing Material: Malleable Iron Function: A rigid support to suspend tubing horizontally or vertically. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12. Standard Finish: DURA-COPPERTM Order By: Part number and finish. Part No. B3198HCT-1/2 B3198HCT-3/4 B3198HCT-1 B3198HCT-11/4 B3198HCT-11/2 B3198HCT-2 Tubing Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 C in. (mm) 5/8" (15.9) 13/16" (20.6) 15/16" (23.8) 11/8" (28.6) 15/16" (33.3) 19/16" (39.7) C Design Load Lbs. (kN) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) Approx. Wt./100 Lbs. (kg) 8 (3.6) 10 (4.5) 10 (4.5) 14 (6.3) 18 (8.1) 23 (10.4) B3198RCT - Extension Split Pipe Clamp Size Range: 1/2" (15mm) to 2" (50mm) copper tubing Material: Malleable Iron C Function: A rigid support to suspend tubing horizontally or vertically. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12. Standard Finish: DURA-COPPERTM Order By: Part number and finish. Part No. B3198RCT-3/8 B3198RCT-1/2 B3198RCT-3/4 B3198RCT-1 B3198RCT-11/4 B3198RCT-11/2 B3198RCT-2 Tubing Size in. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 C in. (mm) 9/16" (14.3) 11/16" (17.5) 7/8" (22.2) 11/16" (27.0) 11/8" (28.6) 11/4" (31.7) 11/2" (38.1) Design Load Lbs. (kN) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) 180 (.80) Approx. Wt./100 Lbs. (kg) 12 (5.4) 12 (5.4) 14 (6.3) 17 (7.7) 17 (7.7) 22 (10.0) 26 (11.8) A (Rod Size) Hanger Rod Not Included A (Rod Size) Hanger Rod Not Included Pipe Hangers Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 64 B-Line series Pipe Hangers & Supports Pipe Hangers B3175 - Ring and Bolt Hanger Size Range: 1/2" (15mm) to 6" (150mm) pipe Material: Pre-Galvanized Steel Function: Designed for suspending light-weight non-insulated pipe. (Use with B3222 eye socket or B3224 hanger adjuster). Standard Finish: Pre-Galvanized Order By: Part number and finish. Part No. B3175-1/2 B3175-3/4 B3175-1 B3175-11/4 B3175-11/2 B3175-2 B3175-21/2 B3175-3 B3175-31/2 B3175-4 B3175-5 B3175-6 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) C in. (mm) 11/16" (27.0) 13/16" (30.2) 15/16" (33.3) 11/2" (38.1) 15/8" (41.3) 113/16" (46.0) 25/16" (58.7) 25/8" (66.7) 27/8" (73.0) 31/8" (79.4) 35/8" (92.1) 43/16" (106.4) Bolt Size 1/4"-20 1/4"-20 1/4"-20 1/4"-20 1/4"-20 1/4"-20 5/16"-18 5/16"-18 5/16"-18 5/16"-18 5/16"-18 5/16"-18 Steel Size in. (mm) 18 Ga. x 7/8" (1.2 x 22.2) 18 Ga. x 7/8" (1.2 x 22.2) 18 Ga. x 7/8" (1.2 x 22.2) 18 Ga. x 7/8" (1.2 x 22.2) 18 Ga. x 7/8" (1.2 x 22.2) 18 Ga. x 7/8" (1.2 x 22.2) 16 Ga. x 11/4" (1.5 x 31.7) 16 Ga. x 11/4" (1.5 x 31.7) 16 Ga. x 11/4" (1.5 x 31.7) 16 Ga. x 11/4" (1.5 x 31.7) 16 Ga. x 11/4" (1.5 x 31.7) 16 Ga. x 11/4" (1.5 x 31.7) Bolt and Nut Included Bolt Size Steel Size C Design Load Lbs. (kN) 275 (1.22) 275 (1.22) 275 (1.22) 275 (1.22) 275 (1.22) 275 (1.22) 500 (2.22) 500 (2.22) 500 (2.22) 500 (2.22) 500 (2.22) 500 (2.22) Approx. Wt./100 Lbs. (kg) 7.5 (3.4) 8.0 (3.6) 9.0 (4.1) 10.5 (4.7) 11.5 (5.2) 13.0 (5.9) 30.0 (13.6) 35.0 (15.9) 38.5 (17.4) 42.0 (19.0) 51.0 (23.1) 58.5 (26.5) B3175CT - Ring and Bolt Hanger, DURA-COPPER Coated Size Range: 1/2" (15mm) to 4" (100mm) pipe Material: Pre-Galvanized Steel Function: Designed for suspending copper tubing allowing for vertical adjustment. (Use with B3222 eye socket or B3224 hanger adjuster). Standard Finish: DURA-COPPERTM Order By: Part number and finish. Bolt and Nut Included C Bolt Size Steel Size Part No. B3175CT-1/2 B3175CT-3/4 B3175CT-1 B3175CT-11/4 B3175CT-11/2 B3175CT-2 B3175CT-21/2 B3175CT-3 B3175CT-31/2 B3175CT-4 Tubing Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) C in. (mm) 15/16" (33.3) 13/8" (34.9) 13/16" (30.2) 15/16" (33.3) 11/2" (38.1) 115/16" (49.2) 23/16" (55.6) 211/16" (68.3) 215/16" (74.6) 33/16" (81.0) Bolt Size 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1" Steel Size in. (mm) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) 1/16" x 7/8" (1.6 x 22.2) Design Load Lbs. (kN) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) Approx. Wt./100 Lbs. (kg) 8 (3.6) 8 (3.6) 8 (3.6) 10 (4.5) 11 (5.0) 11 (5.0) 12 (5.4) 14 (6.3) 16 (7.2) 18 (8.1) Pipe Hangers All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 65 Eaton Pipe Hangers B3190 Return Line Offset J-Hook Size Range: 1/2" (15mm) to 8" (200mm) pipe Material: Steel (Stainless steel available) Function: Recommended for supporting light pipe runs with a 1" (25.4) offset from mounting surfaces. Standard Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Part No. B3190-1/2 B3190-3/4 B3190-1 B3190-11/4 B3190-11/2 B3190-2 B3190-21/2 B3190-3 B3190-31/2 B3190-4 B3190-5 B3190-6 B3190-8 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Design Load Lbs. (kN) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 350 (1.55) 350 (1.55) 350 (1.55) 450 (2.00) 450 (2.00) 450 (2.00) 450 (2.00) Approx. Wt./100 Lbs. (kg) 54 (24.5) 55 (24.9) 78 (35.4) 85 (38.5) 90 (40.8) 98 (44.4) 126 (57.1) 136 (61.7) 147 (66.8) 235 (106.6) 350 (158.7) 383 (173.7) 605 (274.4) 1" (25.4) 5" (127.0) 9/16" Dia. (14.3) B3191 Return Line Straight J-Hook Size Range: 1/2" (15mm) to 8" (200mm) pipe Material: Steel (Stainless steel available) Function: Recommended for supporting light pipe runs flush with the mounting surfaces. Standard Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Part No. B3191-1/2 B3191-3/4 B3191-1 B3191-11/4 B3191-11/2 B3191-2 B3191-21/2 B3191-3 B3191-31/2 B3191-4 B3191-5 B3191-6 B3191-8 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Design Load Lbs. (kN) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 200 (.89) 350 (1.55) 350 (1.55) 350 (1.55) 450 (2.00) 450 (2.00) 450 (2.00) 450 (2.00) Approx. Wt./100 Lbs. (kg) 54 (24.5) 55 (24.9) 76 (34.5) 82 (37.2) 87 (39.4) 96 (43.5) 124 (56.2) 134 (60.8) 145 (65.8) 153 (69.4) 348 (157.8) 381 (172.8) 600 (272.1) 5" (127.0) 9/16" Dia. (14.3) Pipe Hangers Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 66 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 120RWA - Retrofit Wrap Around "U" Hanger Clamp Size Range: 1" (25mm) thru 6" (150mm) pipe Material: Steel Function: Designed to restrain movement of the pipe within standard U-hangers as required by NFPA 13. Where retrofit capability is crucial, the Fig. 120RWA is a labor efficient alternative to the standard B-Line series Fig. 120W wrap around U-hanger. Features Installs easily by tightening two hex nuts. Features a unique bracing slot that locks onto a standard U-hanger to become a solid unit that will stabilize the pipe during seismic activity or sprinkler head activation. Designed to be used in retrofit or new construction applications. Will clamp to existing U-Hangers without restriction to leg angle. Approvals: Underwriters Laboratories listed in the USA (UL) and Canada (cUL) as a restrainer. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the B-Line series Seismic Restraint Systems Guidelines. NFPA 13 (2010) 9.3.6.3. Finish: Plain and Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, type numbers and pipe size Ordering Note: Order by the following type and pipe size: Type 1 -- (1" (25mm) and 11/4" (32mm) pipe size) Type 2 -- (11/2" (40mm) and 2" (50mm) pipe size) Type 3 -- (21/2" (65mm) and 3" (80mm) pipe size) Type 4 -- (4" (100mm) pipe size) Type 6 -- (5" (125mm) and 6" (150mm) pipe size) Important Note: The bracing slot feature is sized to fit the U-Hanger rod schedule as required by NFPA 13 as follows: 5/16" (7.9mm) rod for up to 2" (50mm) pipe 3/8" (9.5mm) rod for 21/2" (65mm) - 6" (160mm) pipe For other rod size requirements consult factory. Type Part No. 120RWA-TYPE1-1 1 120RWA-TYPE1-11/4 1 120RWA-TYPE2-11/2 2 120RWA-TYPE2-2 2 120RWA-TYPE3-21/2 3 120RWA-TYPE3-3 3 120RWA-TYPE4-31/2 4 120RWA-TYPE4-4 4 120RWA-TYPE6-5 6 120RWA-TYPE6-6 6 Pipe Size in. (mm) 1" (20) 11/4" (25) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) Pipe Hangers Component of State of California OSHPD Approved Seismic Restraints System Pipe Hangers All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 67 Eaton Pipe Hangers TOLCOTM Fig. 120 - "U" Hanger Size Range: Size 3/4" (20mm) thru 8" (200mm) pipe Material: Steel Function: Used to support piping from wood beams where no contraction is expected. Used extensively in automatic A fire sprinkler systems. Approvals: Meets or exceeds the requirements of National Fire Protection Association (NFPA), Pamphlet 13. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the Seismic Restraint Systems Guidelines. Maximum Temperature: 750�F (399�C) Finishes: Plain, Electro Galvanized, Hot-Dip Galvanized, SS4 or SS6. Length (Specify) Order By: Part number, pipe size, length and finish Pipe Hangers Part No. 120-3/4 120-1 120-11/4 120-11/2 120-2 120-21/2 120-3 120-31/2 120-4 120-5 120-6 120-8 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) Fastener Size 16 x 2* 16 x 2* 16 x 2* 16 x 2* 16 x 2* 3/8 x 21/2** 3/8 x 21/2** 3/8 x 21/2** 1/2 x 3** 1/2 x 3** 1/2 x 3** 5/8 x 3** Max. Rec. Load*** lbs. (kN) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 320 (1.42) 320 (1.42) 560 (2.49) 560 (2.49) 560 (2.49) 760 (3.38) -- (--) * Drive Screw ** Lag Bolt *** With minimum safety factor of 5 Fastener schedule per NFPA Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 68 B-Line series Pipe Hangers & Supports Pipe Hangers TOLCOTM Fig. 120MJ - Mutt & Jeff "U" Hanger Size Range: Size 3/4" (20mm) thru 8" (200mm) pipe Material: Steel Function: Used to support piping from wood beams where no contraction is expected. Used extensively in automatic fire sprinkler systems. Fig. 120MJ is used when the wood beam is on a diagonal. Finishes: Plain, Electro Galvanized, Hot-Dip Galvanized, SS4 or SS6. Order By: Part number, side length and finish Part No. 120MJ-3/4 120MJ-1 120MJ-11/4 120MJ-11/2 120MJ-2 120MJ-21/2 120MJ-3 120MJ-31/2 120MJ-4 120MJ-5 120MJ-6 120MJ-8 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) Fastener Size Max. Rec. Load*** lbs. (kN) 16 x 2* 16 x 2* 16 x 2* 16 x 2* 16 x 2* 3/8 x 21/2** 3/8 x 21/2** 3/8 x 21/2** 1/2 x 3** 1/2 x 3** 1/2 x 3** 5/8 x 3** 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 250 (1.11) 320 (1.42) 320 (1.42) 560 (2.49) 560 (2.49) 560 (2.49) 760 (3.38) -- (--) A Length (Specify) * Drive Screw ** Lag Bolt *** With minimum safety factor of 5 Fastener schedule per NFPA TOLCOTM Fig. 120W - Wrap Around "U" Hanger Size Range: Size 3/4" (20mm) thru 2" (50mm) pipe Material: Steel Function: Required for automatic fire protection agencies to be used on the end of branch lines to prevent pipe from whipping vertical and striking ceiling or beam. A Finishes: Plain, Electro Galvanized, Hot-Dip Galvanized, SS4 or SS6. Order By: Part number, side length and finish Part No. 120W-3/4 120W-1 120W-11/4 120W-11/2 120W-2 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) A in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) Fastener Size Max. Rec. Load*** lbs. (kN) 16 x 2* 250 (1.11) 16 x 2* 250 (1.11) 16 x 2* 250 (1.11) 16 x 2* 16 x 2* 250 (1.11) 250 (1.11) Length (Specify) * Drive Screw *** With minimum safety factor of 5 Fastener schedule per NFPA Pipe Hangers All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 69 Eaton Pipe Hangers B3262 Light Duty Spring Hanger Rod Size Range: 3/8"-16 to 3/4"-10 Material: Steel Service: Designed for use with a light piping system where vertical movement does not exceed 11/4" (31.7). Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 49 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 48. Order By: Part number. A (Rod Size) C D B A (Rod Size) Part No. B3262-3/8 B3262-1/2 B3262-5/8 B3262-3/4 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 Spring Color Brown Black Red Orange B In (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) C In (mm) 23/4" (69.8) 23/4" (69.8) 23/4" (69.8) 3" (76.2) D In (mm) 41/2" (114.3) 41/2" (114.3) 41/2" (114.3) 7" (177.8) Part No. B3262-3/8 B3262-1/2 B3262-5/8 B3262-3/4 Spring Deflection In (mm) 1.20 (30.1) 1.10 (27.7) 1.00 (25.4) 1.20 (30.1) Rated Load Lbs. (kN) 100-150 (.44 - .67) 150-250 (.67 - 1.11) 350-450 (1.56 - 2.00) 600-750 (2.67 - 3.34) Approx. Wt./100 Lbs. (kg) 390 (176.2) 410 (186.0) 470 (213.2) 1240 (562.6) Pipe Hangers Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 70 B-Line series Pipe Hangers & Supports BH-2-4, BH-5-8, BH-9-12 - Parallel Strap Hangers BH-2-4-R, BH-5-8-R, BH-9-12-R - Right Angle Strap Hangers Material: Steel Function: The Parallel Strap Hanger series is designed for suspending up to 1" (50.8) wide straps parallel to beams. The Right Angle Strap Hanger series is designed for suspending up to 1" (50.8) wide straps at right angle to the beam. Note: Install clip to beam with hammer. Standard Finish: Zinc Phosphate Order By: Part number and finish. Parallel Strap Pipe Hangers Right Angle Strap Part No. Parallel Right Angle BH-2-4 BH-2-4-R BH-5-8 BH-5-8-R BH-9-12 BH-9-12-R Flange Thickness In. (mm) 1/8" to 1/4" (3.2 to 6.3) 5/16" to 1/2" (7.9 to 12.7) 9/16" to 3/4" (14.3 to 19.0) Design Load is a static straight down load. BL1400 - Hanger Size Range: 1/2" (15mm) to 4" (100mm) pipe Material: Steel Function: Designed to support or suspend light duty stationary pipe runs. Standard Finish: Electro-Galvanized. Also available in Stainless Steel Type 304 (SS4) Order By: Part number. Maximum Load Lbs. (kN) 200 (.89) 200 (.89) 200 (.89) Approx. Wt./100 BH-2-12 BH-2-12R Lbs. (kg) Lbs. (kg) 4.5 (2.0) 6.0 (2.7) 5.0 (2.3) 6.5 (2.9) 5.5 (2.5) 7.0 (3.2) W Pipe Size T A Hole Size B Pipe Hangers Part No. BL1400 BL1410 BL1420 BL1430 BL1440 BL1450 BL1460 BL1470 BL1480 BL1490 Pipe Size In. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" 40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) A In. (mm) 29/32" (23.0) 31/32" (24.6) 11/4" (31.7) 113/32" (35.7) 55/8" (41.3) 17/8" (47.6) 21/16" (52.4) 21/2" (63.5) 23/4" (69.8) 31/2" (88.9) Designed for positioning only, no load rating. B In. (mm) 9/32" (7.1) 9/32" (7.1) 9/32" (7.1) 9/32" (7.1) 11/32" (8.7) 11/32" (8.7) 11/32" (8.7) 11/32" (8.7) 11/32" (8.7) 11/32" (8.7) T In. (mm) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 18 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) W In. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) Approx. Wt./100 Lbs. (kg) 6 (2.7) 7 (3.2) 8 (3.6) 10 (4.5) 17 (7.7) 25 (11.3) 26 (11.8) 33 (14.9) 36 (16.3) 40 (18.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 71 Eaton Pipe Clamps Pipe Clamps Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. A wide range of pipe clamps are available for various applications. Materials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREENTM, DURA-COPPERTM and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper Plated, or in Stainless Steel. Recommended Torque (Pipe Clamp Hardware) 1/4"-20 6 ft/lbs (8 Nm) 5/16"-18 11 ft/lbs (19 Nm) 3/8"-16 19 ft/lbs (26 Nm) 1/2"-13 50 ft/lbs (68 Nm) 5/8"-11 65 ft/lbs (88 Nm) 3/4"-10 & larger 75 ft/lbs (101 Nm) Approvals (as noted) Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. All pipe hangers and supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. Select pipe O.D. from charts on pages 321 thru 325. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 72 B-Line series Pipe Hangers & Supports Pipe Clamps B3373 - Standard Riser Clamp B3373F - Felt Lined Standard Riser Clamp for Copper Tubing (not UL Listed or FM Approved) B3373C - PVC Coated Standard Riser Clamp (not FM Approved) Size Range: (B3373) 1/2" (15mm) thru 30" (760mm) pipe (B3373F) 1/2" (15mm) thru 21/2" (65mm) copper tubing (B3373C) 1/2" (15mm) thru 6" (150mm) pipe Material: Steel Design Load Insulation Material: (B3373F) 1/8" (3.2mm) thick felt. Function: Used for supporting vertical piping. Approvals: Underwriters Laboratories Listed in the USA (UL), Canada (cUL) 3/4" (20mm) - 8" (200mm). Factory Mutual Engineering Approved (FM) for plain and electro-Galvanized zinc, 3/4" (20mm) thru 8" (200mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 8 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 8. Bolt Size Maximum Temperature: 650�F (343�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: (B3373 and B3373C) pipe size and finish. B3373F is available for Iron Pipe Size, consult factory. L Bolts and Nuts Included Pipe Clamps B3373C Part No. B3373-1/2 B3373-3/4 B3373-1 B3373-11/4 B3373-11/2 B3373-2 B3373-21/2 B3373-3 B3373-31/2 B3373-4 B3373-5 B3373-6 B3373-8 B3373-10 B3373-12 B3373-14 B3373-16 B3373-18 B3373-20 B3373-24 B3373-30 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) L in. (mm) 81/2" (215.9) 83/4" (222.2) 91/16" (230.2) 91/2" (241.3) 93/4" (247.6) 101/4" (260.3) 1115/16" (303.2) 117/16" (290.8) 123/8" (314.3) 127/8" (327.0) 133/4" (349.2) 143/4" (374.6) 173/4" (450.8) 197/16" (493.7) 2111/16" (550.9) 239/16" (598.5) 263/8" (669.9) 287/8" (733.4) 307/8" (784.2) 347/8" (885.8) 403/4" (1035.0) B3373F Bolt Size 3/8"-16 x 11/4" 3/8"-16 x 11/4" 3/8"-16 x 11/4" 3/8"-16 x 11/4" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 1/2"-13 x 13/4" 1/2"-13 x 13/4" 1/2"-13 x 13/4" 1/2"-13 x 2" 5/8"-11 x 21/2" 5/8"-11 x 21/2" 5/8"-11 x 3" 5/8"-11 x 3" 3/4"-10 x 31/4" 3/4"-10 x 31/4" 3/4"-10 x 31/2" 3/4"-10 x 31/2" 7/8"-9 x 31/2" Design Load Lbs. (kN) 255 (1.13) 255 (1.13) 255 (1.13) 255 (1.13) 255 (1.13) 255 (1.13) 390 (1.73) 530 (2.35) 670 (2.98) 810 (3.60) 1160 (5.16) 1570 (6.98) 2500 (11.12) 2500 (11.12) 2700 (12.01) 2700 (12.01) 2900 (12.90) 2900 (12.90) 2900 (12.90) 2900 (12.90) 2900 (12.90) Approx. Wt./100 Lbs. (kg) 101 (45.9) 105 (47.7) 109 (49.4) 112 (50.9) 113 (51.1) 165 (75.0) 180 (81.6) 195 (88.4) 217 (98.5) 228 (103.5) 480 (217.7) 526 (238.6) 957 (434.1) 1101 (499.4) 1622 (735.7) 1732 (785.6) 2959 (1342.2) 3235 (1467.4) 3568 (1618.4) 4064 (1843.3) 6016 (2728.8) B3373 Notes: For ductile iron (D.I.) pipe use part number B3373DI-pipe size. Contact B-Line Engineering for more information. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 73 Eaton Pipe Clamps B3373CT - Copper Tubing Riser Clamp B3373CTC - PVC Coated Cooper Tubing Riser Clamp Size Range: -- Size 1/2" (15mm) thru 6" (150mm) copper tubing Material: -- Steel Function: -- Used for supporting vertical copper tubing. Approvals: -- Conforms to Federal Specification WW-H-171E & A-A-1192A Type 8 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 Type 8. Finish: -- DURA-COPPERTM Note: -- Available with plastic coating, specify by ordering B3373CTC Order By: -- Part number and nominal tubing size Design Load Bolt Size Bolts and Nuts Included L Pipe Clamps B3373CT B3373CTC Part No. B3373CT-1/2 B3373CT-3/4 B3373CT-1 B3373CT-11/4 B3373CT-11/2 B3373CT-2 B3373CT-21/2 B3373CT-3 B3373CT-31/2 B3373CT-4 B3373CT-5 B3373CT-6 Tubing Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) L in. (mm) 83/4" (222.2) 91/16" (234.9) 95/16" (236.5) 95/8" (244.5) 93/4" (247.6) 107/16" (265.1) 1015/16" (277.8) 117/16" (290.5) 1115/16" (303.2) 121/2" (317.5) 135/8" (346.1) 145/8" (371.5) Bolt Size 5/16"-18 x 1" 5/16"-18 x 1" 3/8"-16 x 1" 3/8"-16 x 1" 3/8"-16 x 11/4" 3/8"-16 x 11/4" 3/8"-16 x 11/4" 3/8"-16 x 11/4" 3/8"-16 x 11/4" 1/2"-13 x 13/4" 1/2"-13 x 2" 1/2"-13 x 2" Design Load Lbs. (kN) 75 (.33) 75 (.33) 120 (.53) 150 (.67) 150 (.67) 150 (.67) 300 (1.33) 300 (1.33) 300 (1.33) 300 (1.33) 500 (2.22) 500 (2.22) Approx. Wt./100 Lbs. (kg) 72 (32.6) 73 (33.2) 74 (33.6) 77 (34.8) 111 (50.3) 120 (54.5) 128 (58.1) 136 (61.5) 145 (65.7) 170 (77.3) 355 (161.0) 386 (175.1) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 74 B-Line series Pipe Hangers & Supports B3132 - Two-Bolt Underground Clamp Size Range: 4" (100mm) thru 24" (600mm) pipe Material: Steel Function: Clamp is used for underground A.W.W.A. cast iron and ductile iron water pipe to prevent joints from separating. The O.D. of the A.W.W.A. pipe is shown in the data table. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and outside diameter of pipe. Order B3132W lugs, tie rods and hex nuts separately. Pipe Clamps A B Bolts and Nuts Included Steel Size Bolt Size Pipe Clamps Part No. B3132-4 B3132-6 B3132-8 B3132-10 B3132-12 B3132-14 B3132-16 B3132-18 B3132-20 B3132-24 Pipe Size in. (mm) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) A in. (mm) 127/8" (327.0) 143/4" (374.6) 171/4" (438.1) 193/8" (492.1) 217/8" (555.6) 26" (660.4) 283/8" (720.7) 313/8" (796.9) 331/2" (850.9) 39" (990.6) B in. (mm) 93/4" (247.6) 12" (304.8) 141/4" (361.9) 161/2" (419.1) 187/8" (479.4) 221/4" (565.1) 245/8" (625.5) 275/8" (701.7) 293/4" (755.6) 351/4" (895.3) Clamp I.D. in. (mm) 5" (127.0) 71/16" (179.4) 93/16" (233.4) 113/8" (288.9) 131/2" (342.9) 153/4" (400.0) 177/8" (454.0) 20" (508.0) 221/8" (562.0) 263/8" (669.9) Steel Size in. (mm) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) 3/4" x 3" (19.0 x 76.2) 3/4" x 4" (19.0 x 101.6) 3/4" x 4" (19.0 x 101.6) 3/4" x 41/2" (19.0 x 114.3) 3/4" x 5" (19.0 x 127.0) Bolt Size 5/8"-11 x 3" 5/8"-11 x 3" 5/8"-11 x 3" 5/8"-11 x 3" 5/8"-11 x 3" 7/8"-9 x 41/2" 1"-8 x 41/2" 11/4"-7 x 5" 11/4"-7 x 5" 11/4"-6 x 51/2" Approx. Wt./100 Lbs. (kg) 864 (391.9) 1020 (462.6) 1222 (554.3) 1409 (639.1) 1608 (729.4) 4359 (1977.2) 6403 (2904.4) 7293 (3308.1) 8778 (3981.7) 11659 (5288.5) B3132W - Lug Washer Size Range: 3/4" (20mm) thru 11/2" (40mm) rod Material: Cast Iron for B3132W-3/4, steel for other sizes Function: Used with B3132 to secure tie rods. The projecting lug bears against the clamp bolt to prevent washer and tie rod from slipping off clamp. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish E B3132W-3/4 G D Dia. H E F B3132W-1 G thru 11/2 D Dia. H Part No. B3132W-3/4 B3132W-1 B3132W-11/4 B3132W-13/8 B3132W-11/2 Tie Rod Size 3/4"-10 1"-8 11/4"-7 13/8"-6 11/2"-6 Use With Pipe Size in. (mm) 4"-12" (100-300) 14"-16" (350-400) 18" (450) 20" (500) 24" (600) Dia. in. (mm) 7/8" (22.2) 11/8" (28.6) 13/8" (34.9) 11/2" (38.1) 15/8" (41.3) E in. (mm) 23/8" (60.3) 31/2" (88.9) 31/2" (88.9) 4" (101.6) 4" (101.6) F in. (mm) -- -31/2" (88.9) 4" (101.6) 41/4" (107.9) 43/4" (120.6) G in. (mm) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) H in. (mm) 15/8" (41.3) 21/2" (63.5) 31/2" (63.5) 4" (101.6) 4" (101.6) Approx. Wt./100 Lbs. (kg) 74 (33.7) 207 (93.9) 236 (107.0) 231 (104.8) 259 (117.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 75 Eaton Pipe Clamps B3134 - Double Bolt Underground Socket Clamp Size Range: 4" (100mm) thru 24" (600mm) pipe Material: Steel Function: Clamp is used for underground A.W.W.A. cast iron and ductile iron water pipe to prevent joints from separating. The O.D. of the A.W.W.A. pipe is shown in the data table. Approvals: Conforms to National Fire Protection Association (NFPA) Pamphlet 24, 4" (100mm) thru 12" (300mm) pipe sizes. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and outside diameter of pipe. Order B3134W plate washers, tie rods and hex nuts separately. A B Pipe Clamps Part No. B3134-4 B3134-6 B3134-8 B3134-10 B3134-12 B3134-14 B3134-16 B3134-18 B3134-20 B3134-24 Pipe Size in. (mm) 4.80" (121.9) 6.90" (175.3) 9.05" (229.9) 11.10" (281.9) 13.20" (335.3) 15.30" (388.6) 17.40" (441.9) 19.50" (495.3) 21.60" (548.6) 25.80" (655.3) A in. (mm) 141/16" 167/16" 195/8" (357.2) (417.5) (498.5) 2113/16" (554.0) 241/2" (622.3) 2615/16" (684.2) 303/4" (781.0) 345/16" (871.5) 365/8" (930.3) 421/8" (1070.0) B in. (mm) 95/16" (236.5) 1111/16" (298.9) 147/8" (442.6) 171/16" (433.4) 191/4" 2111/16" 243/4" 275/16" 295/8" 343/8" (488.9) (550.9) (628.6) (693.7) (752.5) (873.1) Bolt Size 5/8"-11 5/8"-11 5/8"-11 3/4"-10 7/8"-9 7/8"-9 1"-8 11/4"-7 11/4"-7 11/2"-6 B3134 Washer Size) B3134W-3/4 B3134W-3/4 B3134W-3/4 B3134W-3/4 B3134W-1 B3134W-1 B3134W-11/8 B3134W-11/4 B3134W-11/2 B3134W-11/2 Approx. Wt./100 lbs. (kg) 1275 (578.3) 1455 (660.0) 2350 (1065.9) 2925 (1326.8) 4030 (1828.0) 5385 (2442.6) 7645 (3467.8) 9425 (4275.2) 10975 (4978.2) 14865 (6742.6) B3134W - Plate Washer Size Range: 3/4"-10 thru 11/2"-6 rod Material: Steel Function: Used with B3134 to secure tie rods. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish C B A A Part No. B3134W-3/4 B3134W-1 B3134W-11/8 B3134W-11/4 B3134W-11/2 Tie Rod Size 3/4"-10 1"-8 11/8"-7 11/4"-7 11/2"-6 A in. (mm) 3" (76.2) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) B in. (mm) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 3/4" (19.0) Hole Size C in. (mm) 7/8" (22.2) 11/8" (28.6) 11/4" (31.7) 13/8" (35.8) 15/8" (41.2) Approx. Wt./100 lbs. (kg) 120 (54.4) 157 (71.2) 194 (88.0) 230 (104.3) 240 (108.8) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 76 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 4A - Pipe Clamp for Sway Bracing Size Range: 4" (100mm) thru 8" (200mm) pipe. For sizes smaller than 4" (100mm) use B3140. Material: Steel Function: For bracing pipe against sway and seismic disturbance. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) 4" (100mm) thru 8" (200mm). Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). Installation Instructions: The Fig. 4A is the "braced pipe" attachment component of a longitudinal, lateral or riser brace assembly. It is intended to be combined with the "bracing pipe" and B-Line series TOLCO transitional and structural attachment component(s) to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be followed. To Install: Place the Fig. 4A over the pipe to be braced. Attach TOLCO transitional fitting, either Fig. 980, 910 or 909, to the clamp ears. Tighten bolts and nuts; torque requirement is a minimum of 50 ft./lbs. (68Nm). Transitional fitting attachment can pivot for adjustment to proper brace angle. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Pipe Clamps Component of State of California OSHPD Approved Seismic Restraints System B A D C Pipe Clamps Fig. 980 Fig. 980 Fig. 4A Longitudinal Brace Fig. 4A Fig. 4A Lateral Brace (UL Listed Up to 4" (100mm) IPS) Pipe Max. Horizontal Approx. Part Size A B C D Bolt Design Load Wt./100 No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Size lbs. (kN) lbs. (kg) 4A-4 4" (100) 81/2" (215.9) 9/16" (14.3) 33/8" (85.7) 311/16" (93.7) 1/2"-13 2015 (8.96) 221 (100.2) 4A-5 5" (125) 93/4" (247.6) 9/16" (14.3) 37/8" (98.4) 43/8" (111.1) 1/2"-13 2015 (8.96) 253 (114.7) 4A-6 6" (150) 111/2" (292.1) 5/8" (15.9) 5" (127.0) 51/8" (130.2) 1/2"-13 2015 (8.96) 513 (232.7) 4A-8 8" (200) 131/4" (336.5) 3/4" (19.0) 611/16" (169.9) 61/8" (155.6) 1/2"-13 2015 (8.96) 601 (272.6) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 77 Eaton Pipe Clamps B3140 - Standard Pipe Clamp B3140F - Standard Pipe Clamp Felt Lined for Copper Tubing B3140C - Standard Pipe Clamp PVC Coated Size Range: B3140/B3140C Size 1/2" (15mm) thru 30" (750mm) pipe. B3140F Size 1/2" (15mm) thru 21/2" (65mm) copper tubing Material: Steel Function: Recommended for the suspension of non-insulated pipe or insulated pipe with B3151 shields. (Use B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod.) B3140F and B3140C are designed to reduce noise and vibration and/or prevent electrolysis. Approvals: Underwriters Laboratories Listed in the USA (UL), Canada (cUL) 3/4" (20mm) - 12" (300mm), and approved by Factory Mutual Engineering (FM), 3/4" (20mm) - 8" (200mm). Federal Specification WW-H-171E & A-A-1192A, Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 4. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the Seismic Restraint Systems Guidelines. Note: For piping that requires sway bracing refer to Fig. 4A. Maximum Temperature: -- 750�F (399�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish. Order Note: When ordering B3140F allow for 1/8" (3.2mm) felt on each half of clamp. Component of State of California OSHPD Approved Seismic Restraints System Bolt Size B C B C A Pipe Clamps B3140 B3140F B3140C Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 78 B-Line series Pipe Hangers & Supports Pipe Clamps B3140 - Standard Pipe Clamp B3140F - Standard Pipe Clamp Felt Lined B3140C - Standard Pipe Clamp PVC Coated cont. Part No. B3140-1/2 B3140-3/4 B3140-1 B3140-11/4 B3140-11/2 B3140-2 B3140-21/2 B3140-3 B3140-31/2 B3140-4 B3140-5 B3140-6 B3140-8 B3140-10 B3140-12 B3140-14 B3140-16 B3140-18 B3140-20 B3140-24 B3140-30 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) A in. (mm) 3/8" (9.5) 9/16" (14.3) 9/16" (14.3) 17/32" (13.5) 19/32" (15.1) 9/16" (14.3) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) 21/4" (57.1) B in. (mm) 31/32" (24.6) 13/32" (27.8) 15/16" (33.3) 17/16" (36.5) 121/32" (42.0) 21/8" (54.0) 221/32" (67.5) 215/16" (74.6) 35/32" (80.1) 39/16" (90.5) 41/8" (104.8) 415/16" (125.4) 61/16" (154.0) 73/8" (187.3) 87/16" (214.3) 91/4" (234.9) 101/4" (260.3) 117/8" (301.6) 123/4" (323.8) 151/4" (387.3) 185/8" (473.1) Part No. B3140-1/2 B3140-3/4 B3140-1 B3140-11/4 B3140-11/2 B3140-2 B3140-21/2 B3140-3 B3140-31/2 B3140-4 B3140-5 B3140-6 B3140-8 B3140-10 B3140-12 B3140-14 B3140-16 B3140-18 B3140-20 B3140-24 B3140-30 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) Max. Design Load 650�F (343�C) 750�F (399�C) lbs. (kN) lbs. (kN) 500 (2.22) 390 (1.73) 500 (2.22) 390 (1.73) 500 (2.22) 390 (1.73) 500 (2.22) 390 (1.73) 800 (3.56) 620 (2.76) 1040 (4.62) 810 (3.60) 1040 (4.62) 810 (3.60) 1040 (4.62) 810 (3.60) 1040 (4.62) 810 (3.60) 1040 (4.62) 810 (3.60) 1040 (4.62) 810 (3.60) 1615 (7.18) 1260 (5.60) 1615 (7.18) 1260 (5.60) 2490 (11.07) 1950 (8.67) 2490 (11.07) 1950 (8.67) 2490 (11.07) 1950 (8.67) 2490 (11.07) 1950 (8.67) 3060 (13.61) 2390 (10.63) 3060 (13.61) 2390 (10.63) 3060 (13.61) 2390 (10.63) 3500 (15.57) 2740 (12.14) C in. (mm) 117/32" 121/32" 17/8" (38.9) (42.0) (47.6) 2" (50.8) 27/32" (56.4) 23/4" (69.8) 39/32" (83.3) 39/16" (90.5) 325/32" (96.0) 45/16" (109.5) 47/8" (123.8) 513/16" (147.6) 615/16" (176.2) 811/16" (220.7) 93/4" (247.6) 105/8" (269.9) 115/8" (295.3) 131/4" (336.5) 141/8" (358.8) 167/8" (428.6) 21" (533.4) Approx. Wt./100 lbs. (kg) 30 (13.6) 31 (14.0) 33 (14.5) 39 (17.7) 41 (18.6) 118 (53.5) 130 (58.9) 150 (68.0) 158 (71.6) 239 (108.4) 272 (123.4) 541 (245.4) 642 (291.2) 1366 (619.6) 1543 (699.9) 2077 (942.1) 2289 (1038.3) 3206 (1454.2) 3616 (1640.2) 5161 (2341.0) 10460 (4744.6) Bolt Size 5/16"-18 5/16"-18 5/16"-18 5/16"-18 5/16"-18 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 79 Eaton Pipe Clamps B3141 - A.W.W.A. Pipe Clamp Size Range: 4" (100mm) thru 24" (600mm) pipe A Material: Steel Function: Recommended for the suspension of flanged or bell and spigot A.W.W.A. cast iron or ductile iron pipe. The O.D. of the A.W.W.A. iron pipe is shown in the data table. Used with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 4. B Maximum Temperature: 650�F (343�C) Finish: Plain or Electro-Galvanized Note: Available in HDG finish or Stainless Steel materials. Order By: Part number, pipe size and finish B Pipe Clamps Part No. B3141-4 B3141-6 B3141-8 B3141-10 B3141-12 B3141-14 B3141-16 B3141-18 B3141-20 B3141-24 Pipe O.D. in. (mm) 4.80" (121.9) 6.90" (175.2) 9.05" (229.9) 11.10" (281.9) 13.20" (335.3) 15.30" (388.6) 17.40" (441.9) 19.50" (495.3) 21.60" (548.6) 25.80" (655.3) A in. (mm) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 13/4" (44.4) 13/4" (44.4) 17/8" (47.6) 2" (50.8) 2" (50.8) B in. (mm) 41/16" (103.2) 51/16" (128.6) 63/16" (157.2) 71/4" (184.1) 85/16" (211.1) 97/8" (250.7) 115/16" (287.3) 129/16" (319.1) 135/8" (346.1) 165/16" (414.3) Bolt Size 5/8"-11 5/8"-11 5/8"-11 5/8"-11 5/8"-11 3/4"-10 7/8"-9 1"-8 1"-8 11/4"-7 Max. Recommended Design Load lbs. (kN) 1400 (6.23) 1400 (6.23) 1400 (6.23) 1400 (6.23) 1400 (6.23) 2000 (8.89) 2500 (11.12) 3000 (13.34) 3100 (13.79) 4500 (20.01) Approx. Wt./100 lbs. (kg) 860 (390.1) 1060 (480.8) 1230 (557.9) 1430 (648.6) 1630 (739.3) 2300 (1043.3) 3725 (1689.6) 4200 (1905.1) 4575 (2075.2) 6400 (2903.0) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 80 B-Line series Pipe Hangers & Supports B3142 - Heavy Duty Pipe Clamp Size Range: 3" (80mm) thru 24" (600mm) pipe Material: Steel Function: Recommended for the suspension of heavy-duty pipe lines. (Use with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod). Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 4. Maximum Temperature: 750�F (399�C) Finish: Plain or Electro-Galvanized and HDG. Order By: Part number, pipe size and finish Pipe Clamps A C B B Pipe Clamps Part No. B3142-3 B3142-4 B3142-5 B3142-6 B3142-8 B3142-10 B3142-12 B3142-14 B3142-16 B3142-18 B3142-20 B3142-24 Pipe Size in. (mm) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) A in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/4" (31.7) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 13/4" (44.4) B in. (mm) 3" (76.2) 311/16" (93.7) 45/16" (109.5) 53/16" (131.8) 61/4" (158.7) 77/8" (200.0) 91/2" (241.3) 101/8" (257.2) 113/16" (284.2) 123/16" (309.6) 135/16" (338.1) 153/8" (390.5) C in. (mm) 41/8" (104.8) 415/16" (125.4) 59/16" (141.3) 611/16" (169.9) 73/4" (196.8) 91/2" (241.3) 115/8" (295.3) 121/4" (311.1) 135/16" (338.1) 145/16" (363.5) 157/16" (392.1) 173/4" (450.8) Bolt Size 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 11/4"-7 11/2"-6 11/2"-6 11/2"-6 11/2"-6 11/2"-6 11/2"-6 Max. Design Load 650�F (343�C) 750�F (399�C) lbs. (kN) lbs. (kN) 3370 (14.99) 3005 (13.36) 3515 (15.63) 3135 (13.94) 3515 (15.63) 3135 (13.94) 4865 (21.64) 4340 (19.30) 4865 (21.64) 4340 (19.30) 6010 (26.73) 5360 (23.84) 8675 (38.58) 7740 (34.43) 9120 (40.56) 8135 (36.18) 9120 (40.56) 8135 (36.18) 9150 (40.70) 8160 (36.29) 9150 (40.70) 8160 (36.29) 9200 (40.92) 8205 (36.49) Approx. Wt./100 lbs. (kg) 498 (225.9) 634 (287.6) 714 (323.9) 1351 (612.8) 1573 (713.5) 2537 (1150.8) 4300 (1950.5) 5228 (2371.4) 5657 (2566.0) 6914 (3136.2) 7468 (3387.5) 12629 (5728.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 81 Eaton Pipe Clamps B3144 - Standard Double Bolt Pipe Clamp Size Range: -- 1/2" (15mm) thru 36" (900mm) pipe. Material: -- Steel Function: -- Recommended for the suspension of pipe requiring up to 4" (101.6mm) of insulation and where flexibility of the clamp may be necessary. Use B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod. Also recommended for the attachment of sway bracing up to 8" (203.2mm). Refer to B-Line series TOLCO State of California Approved Seismic Restraint Product Manual. Approvals: -- Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 3 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 3. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the B-Line/TOLCO Seismic Restraint Systems Guidelines. Maximum Temperature: 750�F (399�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish. Component of State of California OSHPD Approved Seismic Restraints System A Spacer BC E D Pipe Clamps Part No. B3144-1/2 B3144-3/4 B3144-1 B3144-11/4 B3144-11/2 B3144-2 B3144-21/2 B3144-3 B3144-31/2 B3144-4 B3144-5 B3144-6 B3144-8 B3144-10 B3144-12 B3144-14 B3144-16 B3144-18 B3144-20 B3144-24 B3144-30 B3144-36 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) A in. (mm) 3/8" (9.5) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) B in. (mm) 213/16" (71.4) 3" (76.2) 31/4" (82.5) 31/2" (88.9) 53/8" (136.5) 513/16" (147.6) 61/8" (155.6) 63/4" (171.4) 73/16" (182.6) 73/4" (196.8) 89/16" (217.5) 97/8" (250.8) 11" (279.4) 12" (304.8) 131/8" (333.4) 145/16" (363.5) 159/16" (395.3) 167/8" (428.6) 181/4" (463.5) 207/16" (519.7) 26" (660.4) 323/8" (822.2) C in. (mm) 23/16" (55.6) 23/8" (60.2) 25/8" (66.7) 27/8" (72.9) 41/2" (114.3) 415/16" (125.4) 51/4" (133.3) 57/8" (149.2) 65/16" (160.3) 65/8" (168.3) 77/16" (189.5) 81/2" (215.9) 95/8" (244.5) 101/2" (266.7) 115/8" (295.3) 129/16" (319.1) 1313/16" (350.8) 151/8" (384.2) 163/8" (415.9) 187/16" (468.3) 23" (584.2) 287/8" (733.4) D in. (mm) 11/2" (38.1) 111/16" (42.9) 115/16" (49.2) 23/16" (58.7) 25/8" (66.7) 215/16" (74.6) 31/4" (82.5) 35/8" (92.1) 37/8" (98.4) 411/16" (119.1) 55/16" (134.9) 61/8" (155.6) 75/16" (185.7) 87/8" (225.4) 915/16" (252.4) 115/16" (287.3) 125/16" (312.7) 133/8" (339.7) 151/8" (384.2) 175/16" (439.7) 22" (558.8) 255/8" (650.9) E in. (mm) 7/8" (22.2) 11/16" (27.0) 15/16" (33.3) 19/16" (39.7) 13/4" (44.4) 21/16" (52.4) 23/8" (60.3) 211/16" (68.3) 3" (76.2) 39/16" (90.5) 43/16" (106.4) 43/4" (120.6) 515/16" (150.8) 75/16" (185.7) 87/16" (214.3) 99/16" (242.9) 109/16" (268.3) 115/8" (295.3) 131/4" (336.5) 155/16" (388.9) 19" (482.6) 221/8" (562.0) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 82 B-Line series Pipe Hangers & Supports B3144 - Standard Double Bolt Pipe Clamp cont. BC E D A Spacer Pipe Clamps Component of State of California OSHPD Approved Seismic Restraints System Pipe Clamps Part No. B3144-1/2 B3144-3/4 B3144-1 B3144-11/4 B3144-11/2 B3144-2 B3144-21/2 B3144-3 B3144-31/2 B3144-4 B3144-5 B3144-6 B3144-8 B3144-10 B3144-12 B3144-14 B3144-16 B3144-18 B3144-20 B3144-24 B3144-30 B3144-36 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Bolt Size Size 3/8"-16 3/8"-16 3/8"-16 3/8"-16 5/8"-11 5/8"-11 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 11/4"-7 11/4"-7 11/4"-7 13/8"-6 13/8"-6 13/8"-6 13/4"-5 Max. Design Load 650�F (343�C) 750�F (399�C) lbs. (kN) lbs. (kN) 950 (4.22) -- (--) 950 (4.22) -- (--) 950 (4.22) -- (--) 950 (4.22) -- (--) 1545 (6.87) 1380 (6.14) 1545 (6.87) 1380 (6.14) 1545 (6.87) 1380 (6.14) 1545 (6.87) 1380 (6.14) 1545 (6.87) 1380 (6.14) 2500 (11.12) 2230 (9.92) 2500 (11.12) 2230 (9.92) 2865 (12.74) 2555 (11.36) 2865 (12.74) 2555 (11.36) 3240 (14.41) 2890 (12.85) 3240 (14.41) 2890 (12.85) 4300 (19.12) 3835 (17.06) 4300 (19.12) 3835 (17.06) 4300 (19.12) 3835 (17.06) 5490 (24.42) 4900 (21.79) 4500 (20.01) 4015 (17.86) 7500 (33.36) -- (--) 10500 (46.70) -- (--) Approx. Wt./100 lbs. (kg) 73 (33.1) 73 (33.1) 77 (34.9) 79 (35.8) 236 (107.0) 251 (113.8) 274 (124.3) 289 (131.1) 315 (142.9) 745 (337.9) 828 (375.6) 1261 (572.0) 1535 (696.3) 2173 (985.7) 2404 (1090.4) 4002 (1815.3) 4362 (1978.6) 4935 (2238.5) 6570 (2980.1) 7524 (3412.9) 19502 (8846.1) 23488 (10654.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 83 Eaton Pipe Clamps B3146 - Heavy Duty Double Bolt Pipe Clamp Size Range: 6" (150mm) thru 36" (900mm) pipe. Material: Steel Function: Recommended for the suspension of heavy duty high temperature pipe runs requiring up to 4" (101.6mm) of insulation and where flexibility of the clamp may be necessary. Use with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 3 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 3. Maximum Temperature: 750�F (399�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish. A C B E D Part No. B3146-6 B3146-8 B3146-10 B3146-12 B3146-14 B3146-16 B3146-18 B3146-20 B3146-24 B3146-30 B3146-36 Pipe Size in. (mm) 6" (150) 8" (200) 10" (350) 12" (300) 14" (450) 16" (400) 18" (550) 20" (500) 24" (600) 30" (750) 36" (900) A in. (mm) 13/4" (44.4) 2" (50.8) 21/4" (57.1) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 41/4" (107.9) 41/2" (107.9) B in. (mm) 103/16" (258.8) 113/8" (288.9) 131/8" (333.4) 145/16" (363.5) 151/2" (393.7) 171/8" (435.0) 181/4" (463.5) 193/4" (501.6) 223/8" (568.3) 323/4" (831.8) 401/4" (1022.3) C in. (mm) 815/16" (227.0) 101/8" (257.2) 113/8" (288.9) 129/16" (319.1) 131/2" (342.9) 147/8" (377.7) 161/4" (412.7) 171/4" (438.1) 195/16" (490.5) 281/4" (717.5) 343/4" (882.6) D in. (mm) 6" (152.4) 71/4" (184.1) 9" (228.6) 103/8" (263.5) 115/8" (295.3) 131/8" (333.4) 141/2" (368.3) 16" (406.4) 181/2" (469.9) 243/8" (619.1) 301/8" (765.2) E in. (mm) 43/4" (120.6) 6" (152.4) 71/4" (184.1) 85/8" (219.1) 95/8" (244.5) 107/8" (276.2) 121/2" (317.5) 131/2" (342.9) 151/2" (393.7) 197/8" (504.8) 225/8" (574.7) Pipe Clamps Part No. B3146-6 B3146-8 B3146-10 B3146-12 B3146-14 B3146-16 B3146-18 B3146-20 B3146-24 B3146-30 B3146-36 Bolt Size in. (mm) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 13/4" (44.4) 2" (50.8) 2" (50.8) 2" (50.8) 21/4" (57.1) 23/4" (69.8) Maximum Design Load For Service Temperature 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 3500 (15.57) 3125 (13.90) 4800 (21.35) 4285 (19.06) 5500 (24.46) 4910 (21.84) 7000 (31.13) 6250 (27.80) 9500 (42.25) 8485 (37.74) 10000 (44.48) 8930 (39.72) 13800 (61.38) 12325 (54.82) 15300 (68.05) 13665 (60.78) 16300 (72.50) 14555 (64.74) 20500 (91.18) -- (--) 28000 (124.54) -- (--) Approx. Wt./100 Lbs. (kg) 1200 (544.3) 1850 (839.1) 3030 (1374.4) 4200 (1905.1) 6000 (2721.6) 8000 (3628.8) 11500 (5216.4) 14000 (6350.4) 19000 (8618.4) 40600 (18416.1) 67800 (30754.1) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 84 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 4B - Pipe Clamp for Sway Bracing Size Range: 3/4" (20mm) to 8" (200mm) pipe Material: Steel Function: For bracing pipe against sway and seismic disturbance Approvals: Included in the Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). Underwriters Laboratories Listed in the USA (UL), Canada (cUL) 2" (50mm) - 8" (200mm) Standard Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Installation Instructions: Fig. 4B is the "braced pipe" attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and transitional and structural attachment component(s) to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be followed. To Install: Place the Fig. 4B over the pipe to be braced. Attach other transitional fitting, Fig. 909, 910, or 980. Tighten bolts and nuts. Transitional fitting attachment can pivot for adjustment to proper brace angle. For sizes 2" - 8" Pipe Clamps Component of State of California OSHPD Approved Seismic Restraints System C A B D Shown with two TOLCO Fig. 980's and Schedule 40 brace pipe. Fig. 4B Hanger/Longitudinal Brace Pipe Clamps Part No. 4B-3/4 4B-1 4B-11/4 4B-11/2 4B-2 4B-21/2 4B-3 4B-31/2 4B-4 4B-5 4B-6 4B-8 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 7/8"-9 B in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 11/2" (38.1) 13/4" (44.4) 17/8" (47.6) 2" (50.8) 2" (50.8) 2" (50.8) 21/8" (54.0) 21/8" (54.0) C in. (mm) 27/8" (73.0) 31/4" (82.5) 39/16" (90.6) 313/16" (96.8) 51/8" (130.2) 55/8" (142.9) 63/4" (171.4) 71/4" (184.1) 85/8" (219.1) 97/8" (250.8) 1015/16" (277.8) 137/16" (341.2) D in. (mm) 25/8" (66.7) 215/16" (74.6) 31/4" (82.5) 37/16" (87.3) 45/8" (117.5) 53/8" (136.5) 61/8" (155.5) 63/4" (171.4) 71/4" (184.1) 85/16" (211.1) 91/2" (241.3) 111/2" (292.1) Bolt Size 5/16"-18 5/16"-18 5/16"-18 5/16"-18 5/16"-18 3/8"-16 3/8"-16 3/8"-16 1/2"-13 5/8"-11 5/8"-11 3/4"-10 Design Load Lbs. (kN) 330 (1.47) 330 (1.47) 330 (1.47) 330 (1.47) 440 (1.78) 440 (1.78) 660 (2.93) 660 (2.93) 800 (3.56) 980 (4.36) 980 (4.36) 1200 (5.34) Approx. Wt./100 Lbs. (kg) 56 (3.6) 60 (3.6) 74 (4.5) 79 (5.0) 156 (5.0) 176 (5.4) 198 (6.3) 219 (7.2) 288 (8.1) 390 (8.1) 448 (8.1) 691 (8.1) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 85 Eaton Pipe Clamps B3148 - Offset Pipe Clamp Size Range: 1/2" (15mm) thru 12" (300mm) pipe Material: Steel Function: Recommended for support of pipe lines running at a definite distance from the wall or floor of a building or structure. Maximum Temperature: -- 650�F (343�C) Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Note: Special "A" dimensions available on request, consult factory. Order By: Part number, pipe size and finish Design Load A C Bolts and Nuts Included Bolt Size B H 2 Holes Part No. B3148-1/2 B3148-3/4 B3148-1 B3148-11/4 B3148-11/2 B3148-2 B3148-21/2 B3148-3 B3148-31/2 B3148-4 B3148-6 B3148-8 B3148-10 B3148-12 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) A in. (mm) 27/16" (61.9) 21/2" (63.5) 25/8" (66.7) 23/4" (69.8) 3" (76.2) 33/16" (81.0) 37/16" (87.3) 33/4" (95.2) 4" (101.6) 41/4" (107.9) 55/16" (134.9) 65/16" (160.3) 73/8" (187.3) 83/8" (212.7) Bolt Size B 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 3/4"-10 3/4"-10 C in. (mm) 513/16" (147.6) 515/16" (150.8) 61/4" (158.7) 611/16" (169.9) 615/16" (176.2) 85/16" (211.1) 87/8" (225.4) 91/2" (241.3) 101/16" (255.6) 109/16" (268.3) 143/8" (365.1) 167/16" (417.5) 211/2" (546.1) 247/8" (631.8) H in. (mm) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 13/16" (20.6) 13/16" (20.6) Design Load Approx. Wt./100 Lbs. (kN) Lbs. (kg) 190 (.84) 107 (48.5) 190 (.84) 109 (49.4) 190 (.84) 116 (52.6) 190 (.84) 126 (57.1) 190 (.84) 134 (60.8) 420 (1.87) 191 (86.6) 420 (1.87) 209 (94.8) 420 (1.87) 232 (105.3) 420 (1.87) 250 (113.4) 610 (2.71) 370 (167.8) 870 (3.87) 650 (294.8) 870 (3.87) 787 (357.0) 925 (4.11) 1238 (561.5) 1225 (5.45) 2100 (952.5) Pipe Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 86 B-Line series Pipe Hangers & Supports B3149 - Extended Pipe Clamp Size Range: 3/4" (20mm) thru 8" (200mm) pipe Material: Steel Function: For suspending or supporting piping runs where the pipe cannot be determined until installation. Field modify to suit conditions. Maximum Temperature: 650�F (343�C) Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Note: Special "A" dimensions available on request, consult factory. Order By: Part number, pipe size and finish Pipe Clamps A C Bolt Size B Part No. B3149-3/4 B3149-1 B3149-11/4 B3149-11/2 B3149-2 B3149-21/2 B3149-3 B3149-31/2 B3149-4 B3149-5 B3149-6 B3149-8 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) Bolt Size B 3/8"-16" 3/8"-16" 3/8"-16" 3/8"-16" 1/2"-13" 1/2"-13" 1/2"-13" 1/2"-13" 1/2"-13" 1/2"-13" 5/8"-11" 5/8"-11" C in. (mm) 47/16" (112.7) 411/16" (119.1) 5" (127.0) 51/4" (133.3) 6" (152.4) 71/4" (184.1) 77/8" (200.0) 83/8" (212.7) 91/4" (234.9) 101/2" (266.7) 121/2" (317.5) 145/8" (371.5) Approx. Wt./100 Lbs. (kg) 225 (102.0) 230 (104.3) 235 (106.6) 240 (108.8) 345 (156.5) 360 (163.3) 375 (170.1) 390 (176.9) 500 (226.8) 545 (247.2) 870 (394.6) 980 (444.5) Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 87 Eaton Pipe Clamps B3180FL - Flush Mount Pipe Strap Size Range: 1/2" (15mm) thru 8" (200mm) pipe Material: Steel Function: Recommended for supporting pipe with fittings vertically or horizontally to walls or ceiling. Supports pipe flush with the mounting surface. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 26 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 26. Finish: Plain Note: Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By: Part number, pipe size and material/finish A C B D Pipe Clamps Part No. B3180FL-1/2 B3180FL-3/4 B3180FL-1 B3180FL-11/4 B3180FL-11/2 B3180FL-2 B3180FL-21/2 B3180FL-3 B3180FL-31/2 B3180FL-4 B3180FL-5 B3180FL-6 B3180FL-8 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 41/8" (104.8) 45/16" (109.5) 49/16" (115.9) 415/16" (125.4) 53/16" (131.8) 53/4" (146.0) 61/4" (158.7) 67/8" (174.6) 73/8" (187.3) 83/8" (212.7) 97/16" (239.7) 101/2" (266.7) 14" (355.6) B in. (mm) 5/16" (7.9) 7/16" (11.1) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 11/16" (27.0) 19/16" (39.7) 15/8" (41.3) 17/8" (47.6) 21/8" (53.9) 25/8" (66.7) 33/16" (80.9) 41/4" (107.9) C in. (mm) 27/8" (73.0) 3" (76.2) 33/8" (85.7) 33/4" (95.2) 41/4" (107.9) 43/4" (120.6) 51/4" (133.3) 57/8" (149.2) 63/8" (161.9) 7" (177.8) 77/8" (200.0) 87/8" (225.4) 111/2" (292.1) D in. (mm) 3/4" (19.0) 15/16" (23.8) 11/8" (28.6) 11/2" (38.1) 15/8" (41.3) 21/4" (57.1) 23/4" (69.8) 33/8" (85.7) 37/8" (98.3) 43/8" (111.1) 53/8" (136.5) 67/16" (163.5) 83/8" (212.7) Hole Size in. (mm) 7/16 (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) Max. Rec. Load Lbs. (kN) 410 (1.82) 410 (1.82) 410 (1.82) 410 (1.82) 410 (1.82) 410 (1.82) 610 (2.71) 610 (2.71) 610 (2.71) 725 (3.22) 725 (3.22) 725 (3.22) 900 (4.00) Approx. Wt./100 Lbs. (kg) 21 (9.5) 24 (10.9) 26 (11.8) 30 (13.6) 33 (14.9) 38 (17.2) 102 (46.2) 118 (53.5) 130 (58.9) 159 (72.1) 191 (86.6) 234 (106.1) 446 (202.3) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 88 B-Line series Pipe Hangers & Supports B3180 - Standard Pipe Strap Size Range: 1/2" (15mm) thru 8" (200mm) pipe Material: Steel Function: Recommended for supporting pipe with fittings vertically or horizontally to walls or ceiling. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 26 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 26. Finish: Plain Note: Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By: Part number, pipe size and material/finish Pipe Clamps A C B D Pipe Clamps Part No. B3180-1/2 B3180-3/4 B3180-1 B3180-11/4 B3180-11/2 B3180-2 B3180-21/2 B3180-3 B3180-31/2 B3180-4 B3180-5 B3180-6 B3180-8 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (75) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 37/8" (98.4) 4" (101.6) 49/16" (115.9) 415/16" (125.4) 53/16" (131.8) 53/4" (146.0) 61/4" (158.7) 67/8" (174.6) 73/8" (187.3) 83/8" (212.7) 97/16" (239.7) 101/2" (266.7) 14" (355.6) B in. (mm) 3/4" (19.0) 13/16" (20.6) 7/8" (22.2) 1" (25.4) 13/16" (30.2) 17/16" (36.5) 111/16" (42.9) 2" (50.8) 21/4" (57.1) 21/2" (63.5) 31/16" (77.8) 35/8" (92.1) 45/8" (117.5) C in. (mm) 31/16" (77.8) 31/8" (79.4) 33/8" (85.7) 33/4" (95.2) 41/4" (107.9) 43/4" (120.6) 51/4" (133.3) 57/8" (149.2) 63/8" (161.9) 7" (177.8) 77/8" (200.0) 87/8" (225.4) 111/2" (292.1) D in. (mm) 15/32" (11.9) 15/16" (33.3) 11/2" (38.1) 17/8" (47.6) 21/8" (54.6) 25/8" (66.7) 31/8" (79.4) 33/4" (95.2) 41/4" (107.9) 43/4" (120.6) 513/16" (147.6) 67/8" (174.6) 9" (228.6) Hole Size in. (mm) 7/16 (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) Max. Rec. Load Lbs. (kN) 410 (1.82) 410 (1.82) 410 (1.82) 410 (1.82) 410 (1.82) 410 (1.82) 610 (2.71) 610 (2.71) 610 (2.71) 725 (3.22) 725 (3.22) 725 (3.22) 900 (4.00) Approx. Wt./100 Lbs. (kg) 16 (7.2) 21 (9.5) 26 (11.8) 30 (13.6) 33 (14.9) 38 (17.2) 102 (46.2) 118 (53.5) 130 (58.9) 159 (72.1) 191 (86.6) 234 (106.1) 446 (202.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 89 Eaton Pipe Clamps B2400 - Standard Pipe Strap Size Range: 1/2" (15mm) thru 24" (600mm) pipe Material: Steel Function: Designed for supporting pipe runs from strut supports. Approvals: Underwriters Laboratories Listed for B2400-3/4" thru B2400-8" for Design Load 1 only. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 26 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 26. Finish: Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Note: Ductile iron sizes available. Special "B" dimensions available on request, consult factory. Pipe Size Design Load 3 C Design Load 1 B Hole Sized For Bolt Size A T W Design Load 2 Pipe Clamps Part No. B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Bolt Size A 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 7/8" 7/8" 7/8" 7/8" 7/8" B in. (mm) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 7/16" (11.1) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 11/16" (17.4) 15/16" (33.3) 15/16" (33.3) 15/16" (33.3) 15/16" (33.3) 15/16" (33.3) C in. (mm) 213/16" (71.4) 3" (76.2) 317/32" (89.7) 33/4" (95.2) 41/16" (103.2) 521/32" (143.6) 65/32" (156.3) 625/32" (172.2) 79/32" (184.9) 725/32" (197.6) 87/8" (225.4) 915/16" (252.4) 1131/32" (304.0) 14" (355.6) 16" (406.4) 203/8" (517.5) 223/8" (568.3) 261/8" (663.6) 281/8" (714.4) 321/8" (816.0) T in. (mm) 10 Ga. (3.4) 10 Ga. (3.4) 10 Ga. (3.4) 10 Ga. (3.4) 10 Ga. (3.4) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) W in. (mm) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 90 B-Line series Pipe Hangers & Supports B2400 - Standard Pipe Strap cont. Pipe Size Design Load 1 Design Load 3 C B Pipe Clamps Design Load 1 Only Hole Sized For Bolt Size A T W Design Load 2 Pipe Clamps Part No. B2400-1/2 B2400-3/4 B2400-1 B2400-11/4 B2400-11/2 B2400-2 B2400-21/2 B2400-3 B2400-31/2 B2400-4 B2400-5 B2400-6 B2400-8 B2400-10 B2400-12 B2400-14 B2400-16 B2400-18 B2400-20 B2400-24 Design Load 1 Lbs. (kN) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1500 (6.67) 1500 (6.67) 1500 (6.67) 2000 (8.90) 2000 (8.90) 2000 (8.90) 2000 (8.90) 2000 (8.90) 2000 (8.90) 2000 (8.90) 2000 (8.90) Design Load 2 Lbs. (kN) 150 (.67) 150 (.67) 150 (.67) 150 (.67) 150 (.67) 480 (2.14) 480 (2.14) 480 (2.14) 480 (2.14) 600 (2.67) 600 (2.67) 600 (2.67) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) Design Load 3 Lbs. (kN) 105 (.47) 105 (.47) 120 (.53) 120 (.53) 120 (.53) 180 (.80) 180 (.80) 300 (1.33) 300 (1.33) 450 (2.00) 450 (2.00) 450 (2.00) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) Approx. Wt./100 Lbs. (kg) 23 (10.4) 26 (11.8) 31 (14.0) 36 (16.3) 39 (17.7) 93 (42.2) 106 (48.1) 132 (59.9) 151 (68.5) 160 (72.6) 192 (87.1) 219 (99.3) 297 (134.7) 465 (210.9) 560 (254.0) 761 (345.2) 861 (390.5) 1297 (588.3) 1426 (646.8) 1682 (762.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 91 Eaton Pipe Clamps BVT Series - Vibra-ClampTM Design Load 1 Design Load 2 A 1BBV-1PL/1I25N"0E.I.P B Design Load 3 C Part No. BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT112 BVT137 BVT162 BVT212 BVT262 BVT312 BVT362 BVT412 BVT612 O.D. Size in. (mm) 1/4" (6.3) 3/8" (9.5) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 11/8" (28.6) 13/8" (34.9) 15/8" (41.3) 21/8" (54.0) 25/8" (66.6) 31/8" (79.4) 35/8" (92.1) 41/8" (104.8) 61/8" (155.5) Pipe Size in. (mm) 1/8" (3) 1/4" (6) 3/8" (10) 1/2" (15) 5/8" (17) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 6" (150) A in. (mm) 1.22" (30.9) 1.36" (34.5) 1.49" (37.8) 1.62" (41.1) 1.87" (47.4) 2.00" (50.8) 2.25" (57.1) 2.51" (63.7) 3.00" (76.2) 3.52" (89.4) 4.02" (102.1) 4.53" (115.0) 5.05" (128.2) 5.55" (140.9) 7.62" (193.5) Part No. BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT112 BVT137 BVT162 BVT212 BVT262 BVT312 BVT362 BVT412 BVT612 Design Load 1 Lbs. (kN) 400 (1.78) 400 (1.78) 400 (1.78) 400 (1.78) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 1000 (4.45) 1000 (4.45) 1000 (4.45) Design Load 2 Lbs. (kN) 50 (0.22) 50 (0.22) 50 (0.22) 50 (0.22) 75 (0.33) 75 (0.33) 75 (0.33) 75 (0.33) 125 (0.55) 125 (0.55) 125 (0.55) 125 (0.55) 200 (0.89) 200 (0.89) 200 (0.89) Design Load 3 Lbs. (kN) 50 (0.22) 50 (0.22) 50 (0.22) 50 (0.22) 75 (0.33) 75 (0.33) 75 (0.33) 75 (0.33) 125 (0.55) 125 (0.55) 125 (0.55) 125 (0.55) 150 (0.67) 150 (0.67) 150 (0.67) � Easy one tool installation. � Temperature Range: -40�F (-40�C) to +300�F (148.9�C) � Dampens vibration and noise. � Eliminates galvanic corrosion due to metal to metal contact. � Resists most industrial oils and solvents. � Secures tubing firmly to strut channel. Dimensions B in. (mm) 0.19" (4.8) 0.25" (6.3) 0.31" (7.8) 0.38" (9.6) 0.50" (12.7) 0.56" (14.2) 0.69" (17.5) 0.81" (20.6) 1.00" (25.4) 1.25" (31.7) 1.50" (38.1) 1.75" (44.4) 2.00" (50.8) 2.25" (57.1) 3.25" (82.5) C in. (mm) 0.49" (12.4) 0.61" (15.5) 0.74" (18.8) 0.86" (21.8) 1.15" (29.2) 1.27" (32.2) 1.52" (38.6) 1.78" (45.2) 2.20" (55.9) 2.70" (68.6) 3.20" (81.3) 3.70" (93.9) 4.23" (107.4) 4.73" (120.1) 6.74" (171.1) Wt. Each Lbs. (kg) .11 (.05) .12 (.05) .14 (.06) .15 (.07) .19 (.08) .21 (.09) .26 (.12) .38 (.17) .40 (.18) .55 (.25) .55 (.25) .64 (.29) .76 (.34) .93 (.42) 1.36 (.61) Pipe Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 92 B-Line series Pipe Hangers & Supports BVP Series - Vibra-ClampTM � Easy one tool installation. � Temperature Range: -40�F (-40�C) to +300�F (148.9�C) � Dampens vibration and noise. � Eliminates galvanic corrosion due to metal to metal contact. � Resists most industrial oils and solvents. � Secures pipe firmly to strut channel. Pipe Clamps 1BBV-1PL/1I25N"0E.I.P Design Load 1 A Design Load 2 B Design Load 3 C Part No. BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600 Part No. BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600 O.D. Size in. (mm) 0.540" (13.7) 0.675" (17.1) 0.875" (22.2) 1.050" (26.7) 1.312" (33.3) 1.660" (42.2) 1.900" (48.3) 2.375" (60.3) 2.875" (73.0) 3.500" (88.9) 4.000" (101.6) 4.500" (114.3) 5.563" (141.3) 6.625" (168.3) Pipe Size in. (mm) 1/4" (6) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) A in. (mm) 1.61" (39.9) 1.86" (47.2) 1.99" (50.5) 2.25" (57.1) 2.51" (63.8) 3.00" (76.2) 3.21" (81.5) 3.77" (95.8) 4.28" (108.7) 5.05" (128.3) 5.55" (140.9) 6.05" (153.7) 6.84" (173.7) 8.24" (209.3) Design Load 1 Lbs. (kN) 400 (1.78) 600 (2.67) 600 (2.67) 600 (2.67) 600 (2.67) 800 (3.56) 800 (3.56) 800 (3.56) 800 (3.56) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) Design Load 2 Lbs. (kN) 50 (0.22) 75 (0.33) 75 (0.33) 75 (0.33) 75 (0.33) 125 (0.55) 125 (0.55) 125 (0.55) 125 (0.55) 200 (0.89) 200 (0.89) 200 (0.89) 200 (0.89) 200 (0.89) Design Load 3 Lbs. (kN) 50 (0.22) 75 (0.33) 75 (0.33) 75 (0.33) 75 (0.33) 125 (0.55) 125 (0.55) 125 (0.55) 125 (0.55) 150 (0.67) 150 (0.67) 150 (0.67) 150 (0.67) 150 (0.67) Dimensions B in. (mm) 0.37" (9.4) 0.50" (12.7) 0.56" (14.2) 0.69" (17.5) 0.81" (20.6) 1.00" (25.4) 1.12" (28.4) 1.37" (34.8) 1.62" (41.1) 2.00" (50.8) 2.25" (57.1) 2.50" (63.5) 3.00" (76.2) 3.56" (90.4) C in. (mm) 0.87" (22.1) 1.15" (29.2) 1.27" (32.3) 1.52" (38.6) 1.77" (45.0) 2.21" (56.1) 2.41" (61.2) 2.96" (75.2) 3.46" (87.9) 4.24" (107.7) 4.74" (120.3) 5.24" (133.1) 6.24" (158.4) 7.36" (186.9) Wt. Each Lbs. (kg) .15 (.07) .18 (.08) .20 (.09) .21 (.09) .20 (.09) .36 (.16) .40 (.18) .45 (.20) .54 (.24) .81 (.37) .87 (.39) 1.09 (.49) 1.36 (.61) 1.63 (.74) Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 93 Eaton Pipe Clamps Armafix� IPH Series Inserts Only - Inserts with Clamps � Engineered load-bearing inserts prevents insulation compression � Innovative insulated pipe support � Desirable "Foam-to-Foam" Bond � Slip Data: 45 lbs. (0.20 kN) max � Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) � Service Temperature Range -58�F (-50�C) to +220�F (+105�C) Insert Only Assembly Insert & Clamp 1/2" Wall Insulation Thickness Assembly Insert Only Part No. Part No. Pipe/Copper/OD Hanger Size Size* IPH03812 IPH03812WO 3/8" O.D. 11/4" IPH01212 IPH01212WO 1/2" O.D. 11/4" IPH05812 IPH05812WO 5/8" O.D. 11/2" IPH07812 IPH07812WO 3/4" O.D. & 7/8" O.D. 2" IPH11812 IPH11812WO 3/4" IPS & 11/8" O.D. 2" IPH13812 IPH13812WO 13/8" O.D. 21/2" IPH15812 IPH15812WO 15/8" O.D. 21/2" IPH11012 IPH11012WO 11/2" IPS & 17/8" O.D. 3" IPH21812 IPH21812WO 21/8" O.D. 3" IPH25812 IPH25812WO 25/8" O.D. 31/2" IPH31812 IPH31812WO 31/8" O.D. 4" IPH35812 IPH35812WO 35/8" O.D. 5" IPH41812 IPH41812WO 41/8" O.D. 6" IPH40012 IPH40012WO 4" IPS 6" IPH50012 IPH50012WO 5" IPS 8" IPH60012 IPH60012WO 6" IPS 8" * Recommended pipe hanger size for insulation thickness shown. (Order hanger separately) IPH18230 ARMAFLEX� Insulation Tape � 30 ft. (9.14 M) roll 3/4" Wall Insulation Thickness Assembly Insert Only Part No. Part No. Pipe/Copper/OD Hanger Size Size* IPH03834 IPH03834WO 3/8" O.D. 2" IPH01234 IPH01234WO 1/2" O.D. 2" IPH05834 IPH05834WO 5/8" O.D. 2" IPH07834 IPH07834WO 3/4" O.D. & 7/8" O.D. 21/2" IPH11834 IPH11834WO 3/4" IPS & 11/8" O.D. 21/2" IPH13834 IPH13834WO 13/8" O.D. 3" IPH15834 IPH15834WO 15/8" O.D. 31/2" IPH11034 IPH11034WO 11/2" IPS & 17/8" O.D. 31/2" IPH21834 IPH21834WO 21/8" O.D. 4" IPH25834 IPH25834WO 25/8" O.D. 5" IPH31834 IPH31834WO 31/8" O.D. 5" IPH35834 IPH35834WO 35/8" O.D. 6" IPH41834 IPH41834WO 41/8" O.D. 6" IPH40034 IPH40034WO 4" IPS 6" IPH50034 IPH50034WO 5" IPS 8" IPH60034 IPH60034WO 6" IPS 10" IPH80034 IPH80034WO 8" IPS 12" * Recommended pipe hanger size for insulation thickness shown. (Order hanger separately) 1" Wall Insulation Thickness Assembly Insert Only Part No. Part No. Pipe/Copper/OD Hanger Size Size* IPH05810 IPH07810 IPH11810 IPH13810 IPH15810 IPH11010 IPH21810 IPH25810 IPH31810 IPH35810 IPH41810 IPH40010 IPH50010 IPH60010 IPH80010 IPH05810WO 5/8" O.D. IPH07810WO 3/4" O.D. & 7/8" O.D. IPH11810WO 3/4" IPS & 11/8" O.D. IPH13810WO 13/8" O.D. IPH15810WO 15/8" O.D. IPH11010WO 11/2" IPS & 17/8" O.D. IPH21810WO 21/8" O.D. IPH25810WO 25/8" O.D. IPH31810WO 31/8" O.D. IPH35810WO 35/8" O.D. IPH41810WO 41/8" O.D. IPH40010WO 4" IPS IPH50010WO 5" IPS IPH60010WO 6" IPS IPH80010WO 8" IPS 21/2" 3" 3" 31/2" 31/2" 4" 4" 5" 5" 6" 6" 8" 8" 10" 12" * Recommended pipe hanger size for insulation thickness shown. (Order hanger separately) Pipe Clamps Eaton Armafix� and Armaflex� is a registered trademark of Armacell. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 94 B-Line series Pipe Hangers & Supports B1999 - Vibra-CushionTM � Ideal Isolation Material � Inhibits Galvanic Corrosion � Dampens Sound and Vibration � Service Temperature Range -75� F (-60�C) to +375�F (+190�C) � Packaged - 20 Ft. (6.09m) per carton Vibra Cushion is designed for use with refrigeration lines, HVAC, copper tubing, glass pipe and hydraulic lines. It provides an energy-absorption barrier between the lines and the mounting material and remains flexible thru its entire service range of -75�F (-60�C) to +375�F (+190�C). This elastomer allows for expansion and contraction within the mounting system and prevents galvanic reaction between dissimilar metals. Note: See Strut Catalog for sizing information. ISO - ISO-PIPETM � Non-adhesive rubber tape � Fuses to itself � Water resistant � Prevents galvanic reaction caused by dissimilar metal contact � Service Temperature Range -140� F (-95�C) to +395�F (+200�C) � 1" (25.4mm) wide x 0.02" (0.5mm) thick � Packaged - 36 Ft. (10.97m) per carton Pipe Clamps Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 95 Eaton Pipe Clamps TOLCOTM Fig. 22 - Hanger for CPVC Plastic Pipe Single Fastener Strap Size Range: 3/4" (20mm) thru 2" (50mm) CPVC pipe Material: Pre-Galvanized Steel C Function: Intended to perform as a hanger to support CPVC piping used in automatic fire sprinkler systems. The product acts as a hanger when tab is upward and the fastener screw is in the horizontal position. Fig. 22 can be installed on the top of a beam, but in this situation acts as a guide to the piping which is supported by the beam itself. It is not intended to support CPVC pipe from under a flat horizontal surface, such as a ceiling. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) to support fire sprinkler piping. May be installed in wood using fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using (1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13, 13R and 13D. A Features: Fig. 22 incorporates features which protect the pipe and ease B installation. The flared edge design protects CPVC pipe from any rough surface. It is easily attached to the building structure using the special UL Listed hex head self threading screw* furnished with the product. It is recommended that rechargeable electric drills fitted with a hex socket attachment to be used as installation tools. No impact tools (such as a hammer) are allowed. Damage has been known to result from installations using impact type tools. No pre-drilling of a pilot hole in wood is required. Finish: Pre-Galvanized Order By: Part number and CPVC pipe size. * Hardened hex head self threading screw is furnished with the product and is the minimum fastener size acceptable. Part No. 22-3/4 22-1 22-11/4 22-11/2 22-2 CPVC Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) A in. (mm) 27/16" (61.9) 211/16" (68.3) 31/16" (77.8) 35/16" (84.1) 33/4" (95.2) B in. (mm) 15/16" (33.3) 17/16" (36.5) 15/8" (42.3) 13/4" (44.4) 21/8" (54.6) C in. (mm) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) Max. Hanger Spacing Ft. (m) 51/2 (1.67) 6 (1,83) 61/2 (1.98) 7 (2.13) 8 (2.44) Fastener Hex Head Size in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) Approx. Wt./100 Lbs. (kg) 9 (4.1) 9 (4.1) 11 (5.0) 12 (5.4) 15 (6.8) Pipe Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 96 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 22L2 - One Hole Hanger/Restrainer for CPVC & Steel Pipe Size Range: 3/4" (20mm) thru 2" (50mm) CPVC & steel pipe Material: Pre-Galvanized Steel Function: cULus Listed to perform as a hanger and restrainer for CPVC or IPS piping systems. The innovative design also allows for a preferred installation location close to a CPVC fitting without applying damaging compression forces on the pipe which could result in serious Mechanical ESC (Environmental Stress Cracking). Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) to support fire sprinkler piping. May be installed in wood using fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using (1) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Installation Note: Comes in open position for easier installation. Because of multi � structural installation possibilities, specific fastener not included; see notes below for various applications. For Concrete Installation -- UL requires a minimum test load of 340 lbs. (1.5kN) for CPVC hangers and 750 lbs. (3.3kN) for steel pipe hangers; verify anchors meet or exceed these requirements. For Wood Installation -- Test results have shown that #14 x 11/2" wood screws will support the required load for c UL us. For Steel Installation -- Test results have shown that 1/4" x 1" (min. 20ga steel) Tek type screw will support required UL load. Finish: Pre-Galvanized Order By: Part number Patent Pending Pipe Clamps C A B TTAaBb DDOoWwNn oorr TTAaBbUUPp HHAaNnGgEeRr//RREeSsTtRraAinINeErR Mounting MOUNTING SURFACE Surface SSPpRriInNkKleLEr R HHEeAaDd PiPpIPeE OOD D HHAaNnGgEeRr//RREeSsTtrRaAinINeEr R FFITiTtINtiGnOgD OD OOFFSfEfTset DDESeIGsNign Part No. 22L2-3/4 22L2-1 22L2-11/4 22L2-11/2 22L2-2 CPVC or Steel Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) A in. (mm) 23/16" (55.6) 21/2" (63.5) 213/16" (71.4) 31/8" (79.4) 39/16" (90.5) B in. (mm) 15/16" (23.8) 11/8" (28.6) 11/4" (31.7) 17/16" (36.5) 15/8" (41.3) C in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) Max. Hanger Spacing - CPVC Ft. (m) 51/2 (1.67) 6 (1,83) 61/2 (1.98) 7 (2.13) 8 (2.44) Max. Hanger Spacing - Steel in. (mm) NA (NA) 12 (3.66) 12 (3.66) 15 (4.57) 15 (4.57) Approx. Wt./100 Lbs. (kg) 9 (4.1) 9 (4.1) 11 (5.0) 12 (5.4) 15 (6.8) Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 97 Eaton Pipe Clamps TOLCOTM Fig. 23 - Hanger for CPVC Plastic Pipe Double Fastener Strap Size Range: 3/4" (20mm) thru 3" (80mm) CPVC pipe Material: Pre-Galvanized Steel Function: Intended to perform as a hanger to support CPVC piping used in automatic fire sprinkler systems. Fig. 23 can be installed on the top, bottom or side of a beam. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) sizes 3/4" (20mm) thru 2" (50mm) to support fire sprinkler piping. May be installed in wood using fasteners supplied with product, or into minimum 20 gauge (0.9mm) steel using (2) 1/4" x 1" tek type screw. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Features: Fig. 23 incorporates features which protect the pipe and ease installation. The flared edge design protects the CPVC pipe from any rough surface. It also incorporates snap restrainers allowing easier and faster installation. Easily attaches to the building structure using the two UL Listed hex head self threading screws* C furnished with the product. It is recommended that rechargeable electric drills fitted with a hex socket attachment be used as installation tools. No impact tools (such as a hammer) are allowed. Damage has been known to result from installations using impact type tools. No pre-drilling of a pilot hole in wood is required. Finish: Pre-Galvanized Order By: Part number and pipe size * Hardened hex head self threading screw is furnished with the product and is the minimum fastener size acceptable. B B A Part No. 23-3/4 23-1 23-11/4 23-11/2 23-2 23-21/2 23-3 CPVC Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) A in. (mm) 31/8" (79.4) 33/8" (85.7) 43/16" (106.4) 47/16" (112.7) 47/8" (123.8) 53/8" (136.5) 6" (152.4) B in. (mm) 19/16" (39.7) 111/16" (42.9) 23/32" (53.1) 27/32" (56.3) 27/16" (61.9) 211/16" (68.3) 3" (76.2) C in. (mm) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) Max. Hanger Spacing Ft. (m) 51/2 (1.67) 6 (1,83) 61/2 (1.98) 7 (2.13) 8 (2.44) Consult Factory Consult Factory Fastener Hex Head Size in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) Approx. Wt./100 Lbs. (kg) 9 (4.1) 9 (4.1) 11 (5.0) 12 (5.4) 15 (6.8) 22 (10.0) 25 (11.3) Pipe Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 98 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 24 - Hanger for CPVC Plastic Pipe Double Fastener Strap Side Mounted Size Range: 3/4" (20mm) thru 2" (50mm) CPVC pipe Material: Pre-Galvanized Steel Function: Intended to perform as a hanger to support CPVC piping used in automatic fire sprinkler systems. Can be installed on the top or on the bottom of a beam. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) to support fire sprinkler piping. May be installed in wood using fasteners supplied with product, or into minimum 20 gauge (0.912mm) steel using (2) 1/4" x 1" tek type screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Features: Fig. 24 incorporates features which protect the pipe and ease installation. The flared edge design protects the CPVC pipe from any rough surface. Easily attaches to the building structure using the two UL Listed hex head self threading screws* furnished with the product. It is recommended that rechargeable electric drills fitted with a hex socket attachment be used as installation tools. No impact tools (such as a hammer) are allowed. Damage has been known to result from installations using impact type tools. No pre-drilling of a pilot hole in wood is required. Finish: Pre-Galvanized Order By: Part number and pipe size * Hardened hex head self threading screw is furnished with the product and is the minimum fastener size acceptable. Pipe Clamps C B B A Part No. 24-3/4 24-1 24-11/4 24-11/2 24-2 CPVC Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) A in. (mm) 25/16" (58.7) 25/8" (66.7) 3" (76.2) 31/4" (82.5) 311/16" (93.7) B in. (mm) 15/32" (27.8) 15/16" (33.3) 11/2" (38.1) 15/8" (42.3) 127/32" (43.6) C in. (mm) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) Max. Hanger Spacing Ft. (m) 51/2 (1.67) 6 (1,83) 61/2 (1.98) 7 (2.13) 8 (2.44) Fastener Hex Head Size in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) Approx. Wt./100 Lbs. (kg) 9 (4.1) 9 (4.1) 11 (5.0) 12 (5.4) 15 (6.8) Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 99 Eaton Pipe Clamps TOLCOTM Fig. 25 - Surge Restrainer Size Range: -- One size fits 3/4" (20mm) thru 2" (40mm) pipe. Material: -- Pre-Galvanized Steel Function: -- Designed to be used in conjunction with Fig. 200 band hangers to restrict the upward movement of piping as it occurs during sprinkler head activation or earthquake type activity. The surge restrainer is easily and efficiently installed by snapping into a locking position on the band hanger. This product is intended to satisfy the requirements as indicated in the National Fire Protection Association NFPA 13, 2010 edition, 9.2.3.4.4.1 and 9.2.3.4.4.4 Can be used to restrain either steel pipe or CPVC plastic Pipe. Approvals: -- Underwriters Laboratories Listed only when used with band hanger Fig. 200, in the USA (UL) and Canada (cUL). Finish: Pre-Galvanized Order By: Part number and band hanger, size from 3/4" (20mm) thru 2" (40mm). Patent #5,344,108 Part No. 25 Approx. Wt./100 lbs. (kg) 4.8 (2.2) Pipe Clamps Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 100 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 27B - Speed Nut Size Range: -- Fits screws supplied with all CPVC hangers. Material: -- Pre-Galvanized Steel Finish: -- Pre-Galvanized Function: -- To be used anywhere a screw cannot achieve full embedment due to thickness of wood structural material when installed. Fig. 27B allows full pull out load capacity of screws when installed to the standard screws supplied with all CPVC hangers (Fig. 22, 23, 24, 28, 28M, 29, and B3184). Part No. 27B Approx. Wt./100 lbs. (kg) 1.2 (0.5) Fig. 27B (1) Required High Side of Hanger Application Fig. 27B (2) Required Pipe Clamps Pipe Clamps Hanger Application Hanger and Restraint Application Fig. 27B (1) Required High Side of Hanger Application Fig. 27B (2) Required Hanger Application Hanger and Restraint Application All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 101 Eaton Pipe Clamps TOLCOTM Fig. 28 - "Stand-Off" Hanger & Restrainer for CPVC Plastic Pipe Size Range: -- 3/4" (20mm) through 2" (50mm) Material: -- Steel, Pre-Galvanized Function: -- Designed to be used as a hanger and restrainer for CPVC piping where the "stand-off" design will ease installation by eliminating the need for wood blocking. Features: � Flared edge design protects CPVC pipe from any rough or abrasive surfaces. � Unique twist and lock design holds pipe firmly in place and allows retrofit type of installation. A � The "Stand-Off" design eliminates the need for wood block extension. � Can be installed on horizontal or vertical piping regardless of mounting surface orientation. � Attaches easily to wood structure with two hex head self-threading screws furnished with B C product. � Installs easily using rechargeable electrical driver with 5/16" (7.9mm) extension socket eliminating impact tool damage to pipe. � Attaches easily to steel, minimum 18 gauge (1.024mm) with (2) 1/4" x 1" tek type self drilling tapping screws. � UL Listed as a hanger and a restrainer for fire sprinkler piping. Approvals: -- Underwriters Laboratory Listed in the USA (UL) and Canada (cUL) to support automatic fire sprinkler systems. May be installed into wood using fasteners supplied with product, or into minimum 18 gauge steel using (2) 1/4" x 1" tek type screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Fig. 28 satisfies the UL vertical restraint requirement where needed. UL Listed as a hanger and vertical restraint when installed on 3/8" (9.5mm) composite wood material. Use two Fig. 27B Speed Nuts when used as a hanger and restraint. Use one Fig. 27B Speed Nut on the upper installed screw when used as a hanger only. Order by: -- Part number and pipe size. Pat. # 7,455,268, Pat. # 7,832,248 Pipe Clamps Fig. 27B (1) Required High Side of Hanger Application Fig. 27B (2) Required Hanger Application Hanger and Restraint Application Eaton Part No. 28-3/4 28-1 28-11/4 28-11/2 28-2 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) A in. (mm) 31/32" (77.0) 35/16" (84.1) 35/8" (92.1) 4" (101.6) 41/2" (114.3) B in. (mm) 2" (50.8) 23/16" (55.6) 23/8" (60.3) 21/2" (63.5) 211/16" (68.3) C in. (mm) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 35/8" (92.1) Approx. Wt./100 lbs. (kg) 18 (8.1) 21 (9.5) 23 (10.4) 31 (14.0) 34 (15.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 102 B-Line series Pipe Hangers & Supports Pipe Clamps TOLCOTM Fig. 28M - Offset Hanger & Restrainer for CPVC Plastic Pipe Size Range: 3/4" (20mm) thru 2" (32mm) Material: Steel, Pre-Galvanized Function: Designed to be used as a hanger and restrainer for CPVC piping where the "stand-off" design will ease installation by eliminating the need for wood blocking. Features: � Flared edge design protects CPVC pipe from any rough or abrasive surfaces � Unique snap-on design holds pipe firmly in place and allows retrofit type of installation � The "Stand-Off" design eliminates the need for wood block extension A � Can be installed on horizontal or vertical piping regardless of mounting surface orientation � Attaches easily to wood structure with two hex head self-threading screws furnished with product � Installs easily using rechargeable electrical driver with 5/16" (7.9mm) extension socket eliminating impact tool damage to pipe � Attaches easily to steel, minimum 18 gauge (1.024mm) with (2) 1/4" x 1" tek type self drilling tapping screws C � cULus Listed as a hanger and a restrainer for fire sprinkler piping Installation Note: When installed in wood structural members and threads from the #10 x 1" screws are exposed, use Fig. 27B speed nut to secure B Approvals: Underwriters Laboratory Listed in the USA (UL) and Canada (cUL) to support automatic fire sprinkler systems. May be installed into wood using fasteners screws. Meets and exceeds the requirements of NFPA 13, 13R and 13D. Fig. 28M satisfies the UL vertical restraint requirements where needed. Order By: Part number and pipe size Fig. 27B (2) Required Patent #7,744,042 Pipe Clamps Restraint Hanger and Restraint Application Fig. 27B (1) Required High Side of Hanger Restraint Detail A Hanger Application Part No. 28M-3/4 28M-1 28M-11/4 28M-11/2 28M-2 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (49) 2" (50) A in. (mm) 2" (50.8) 21/8" (54.0) 25/16" (58.7) 27/16" (61.9) 25/8" (66.7) * Required per NFPA 13 for CPVC plastic pipe Hole Dia. B in. (mm) 3/16" (4.8) 3/16" (4.8) 3/16" (4.8) 3/16" (4.8) 3/16" (4.8) C in. (mm) 35/16" (84.1) 31/2" (88.9) 31/2" (88.9) 37/8" (98.4) 47/16" (112.7) Max Spacing* in. (mm) 5'-6" (1676) 6'-0" (1829) 6'-6" (1981) 7'-0" (2133) 8'-0" (2438) Approx. Wt./100 lbs. (kg) 9 (4.1) 12 (5.4) 13 (5.9) 14 (6.3) 15 (6.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 103 Eaton Pipe Clamps TOLCOTM Fig. 29 - Double Offset Hanger & Restrainer for CPVC Plastic Pipe Size Range: Available in 3/4" (20mm) and 1" (25mm) pipe sizes Material: Pre-Galvanized Steel Function: Intended to perform as a hanger and restrainer for CPVC, plastic fire sprinkler pipe. Provides double offset 11/2" (20mm) x 11/2" (20mm) from mounting surface. This design will ease installation by eliminating the need for wood block extension and allow retro-fit attachment of hanger to sprinkler pipe. Features: � Thumb tab provides protection to restrain pipe in rough job site conditions. Tab is not required to be bent for listed installation. � Offset edge eliminates abrasion. � Attaches easily to wood structure with two special #10 x 1" hex head self-threading screws furnished with product. � Can be used as a single offset hanger by aligning "dimples" with top of mounting surface and utilizing two fasteners in two of the three holes provided. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) as a hanger and restrainer to support fire sprinkler systems. Meets and exceeds requirements of NFPA 13, 13R and 13D. Finish: Pre-Galvanized Order By: Part number and pipe size. Patent # US2008/0129040A1 Part No. 29-3/4 29-1 Pipe Size in. (mm) 3/4" (20) 1" (25) Approx. Wt./100 lbs. (kg) 17.0 (7.7) 18.6 (8.4) 1.5" (38.1mm) 1.5" (38.1mm) 1.5" (38.1mm) 1.5" (38.1mm) Pipe Clamps Double Offset Single Offset Install using a rechargeable electric drill fitted with a 5/16" (7.9mm) socket attachment with the special hex head self-tapping screws provided. Install screws until they bottom out. Pipe can be "snapped" into hanger before or after installation of the screws to the mounting surface. "Thumb tab" may be bent up to provide additional protection to the pipe, but is not required for performance of the hanger / restrainer function. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 104 B-Line series Pipe Hangers & Supports B3184 - Offset Hanger for CPVC Plastic Pipe and IPS Pipe Size Range: 3/4" (20mm) thru 2" (32mm) Material: Pre-Galvanized Steel Function: Designed to be used as a hanger for CPVC piping or steel piping where the "stand-off" design will ease installation by eliminating the need for wood blocking. Features: � Flared edge design protects CPVC pipe from any rough or abrasive surfaces � The "Stand-Off" design eliminates the need for wood block extension � Can be installed on horizontal or vertical piping regardless of mounting surface orientation � Attaches easily to wood structure with two hex head self-threading screws furnished with product Installation Note: When installed in wood structural members and threads from the #10 x 1" screws are exposed, use Fig. 27B speed nut to secure Order By: Part number and pipe size Pipe Clamps Pipe Size H L Pipe Clamps Part No. B3184-3/4 B3184-1 B3184-11/4 B3184-11/2 B3184-2 CPVC Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) H Overall in. (mm) 29/16" (65.1) 213/16" (71.4) 33/16" (81.0) 37/16" (87.3) 37/8" (98.4) L Overall in. (mm) 41/4" (107.9) 41/2" (114.3) 45/8" (117.5) 5" (127.0) 5" (127.0) Max. Hanger Spacing ft. (m) 51/2 (1.67) 6 (1,83) 61/2 (1.98) 7 (2.13) 8 (2.44) Fastener Hex Head Size in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) Approx. Wt./100 Lbs. (kg) 9.0 (4.1) 10.0 (4.5) 12.0 (5.4) 12.0 (5.4) 15.0 (6.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 105 Eaton Pipe Clamps KWIK-CLIPTM Series Size Range: 1/2" (15mm) thru 2" (50mm) Copper Tubing or CPVC pipe sizes 3/8" (9.5mm) thru 21/8" (54mm) O.D. Tubing sizes Material: Plastic - Black Features: � One piece design greatly reduces installation time. � No tools required to install. � Non-metallic design eliminates metal-to-metal contact; preventing galvanic corrosion. � Easily snaps into channel or onto 3/8"-16 all thread rod. � Meets UL2043 requirements for plenum rating; and UL94 HB flame rating. � Working temperature range of -40�F (-40�C) to +275�F (135�C). � BPIC and BPSC clips can be used with insulation, maintaining an unbroken barrier seal and eliminating sweating. � BPRC rod clip can be snapped onto 3/8"-16 all thread rod at any location. Order By: Part number. Rod Mount Clips Pipe Clamps BPRC Series Part Number BPRC062 BPRC075 BPRC087 BPRC100 BPRC112 BPRC125 BPRC137 BPRC150 BPRC162 BPRC200 BPRC212 Copper/CPVC Pipe in. (mm) 1/2" (15) 5/8" (16) 3/4" (20) -- (--) 1" (25) -- (--) 11/4" (32) -- (--) 11/2" (40) -- (--) 2" (50) O.D. Tubing in. (mm) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 15/8" (41.3) 2" (50.8) 21/8" (54.0) Sch.40 Pipe in. (mm) -- (--) -- (--) 1/2" (12.7) 3/4" (19.0) -- (--) 1" (25.4) -- (--) -- (--) -- (--) -- (--) -- (--) Approx. Wt./100 lbs. (kg) 1.2 (0.54) 1.3 (0.59) 1.4 (0.63) 1.5 (0.68) 1.6 (0.72) 1.7 (0.77) 1.8 (0.81) 2.1 (0.95) 2.3 (1.04) 2.5 (1.13) 2.7 (1.22) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 106 B-Line series Pipe Hangers & Supports KWIK-CLIPTM Series - cont. Channel Mount Clips Pipe Clamps BPIC Series BPSC Series Part Number BPSC037 BPSC050 BPSC062 BPSC075 BPSC087 BPSC112 BPSC137 BPSC162 Copper/CPVC Pipe in. (mm) 1/4" (6) 3/8" (10) 1/2" (15) 5/8" (16) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) O.D. Tubing in. (mm) 3/8" (9.5) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 11/8" (28.6) 13/8" (34.9) 15/8" (41.3) Sch.40 Pipe in. (mm) -- (--) -- (--) -- (--) -- (--) 1/2" (12.7) -- (--) -- (--) -- (--) Approx. Wt./100 lbs. (kg) 2.3 (1.0) 2.6 (1.2) 2.8 (1.3) 3.3 (1.5) 3.9 (1.7) 4.5 (2.0) 5.0 (2.2) 5.5 (12.5) Part Number BPIC062 BPIC075 BPIC087 BPIC100 BPIC112 BPIC125 BPIC137 BPIC150 BPIC162 BPIC200 BPIC212 Copper/CPVC Pipe in. (mm) 1/2" (15) 5/8" (16) 3/4" (20) -- (--) 1" (25) -- (--) 11/4" (32) -- (--) 11/2" (40) -- (--) 2" (50) O.D. Tubing in. (mm) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 15/8" (41.3) 2" (50.8) 21/8" (54.0) Sch.40 Pipe in. (mm) -- (--) -- (--) 1/2" (12.7) 3/4" (19.0) -- (--) 1" (25.4) -- (--) -- (--) -- (--) -- (--) -- (--) Approx. Wt./100 lbs. (kg) 2.9 (1.3) 2.9 (1.3) 3.0 (1.4) 3.2 (1.4) 3.3 (1.5) 3.4 (1.5) 3.5 (1.6) 3.8 (1.7) 4.0 (1.8) 4.2 (1.9) 4.4 (2.0) Pipe Clamps Insert in channel. Twist into place. Lay tubing/pipe into clip. Snap clip closed. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 107 Eaton Pipe Rollers & Roller Supports Pipe Rollers & Pipe Supports Pipe rollers and roller supports offered in this section are designed to compensate for longitudinal movement due to the expansion or contraction of both insulated or non-insulated pipe. Materials Carbon Steel with Cast Iron rollers are used in the manufacture of pipe roller supports. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREENTM and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper plated, or in Stainless Steel. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 SP-58. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 108 B-Line series Pipe Hangers & Supports Pipe Rollers & Roller Supports B3110 - Adjustable Steel Yoke Pipe Roll Size Range: 2" (65mm) thru 24" (600mm) pipe Material: Cast iron roller and steel axle/hanger (Non-metallic polyurethane rollers are available) Function: For supporting pipe where movement may occur due to thermal expansion. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 44, 1" (25mm) thru 20" (500mm), and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 43. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish A (Rod Size) B Hanger Rod Center of axle to E Not Included center of pipe. C Center of axle to top of hanger steel. D Rod Take-Out Center of pipe to bottom of hanger rod. D E C Adjustment B Top of pipe to bottom of hanger rod nut. F Part No. B3110-2 B3110-21/2 B3110-3 B3110-31/2 B3110-4 B3110-5 B3110-6 B3110-8 B3110-10 B3110-12 B3110-14 B3110-16 B3110-18 B3110-20 B3110-24 Part No. B3110-2 B3110-21/2 B3110-3 B3110-31/2 B3110-4 B3110-5 B3110-6 B3110-8 B3110-10 B3110-12 B3110-14 B3110-16 B3110-18 B3110-20 B3110-24 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Rod Size A 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 11/4"-7 11/2"-6 B in. (mm) 19/16" (39.7) 17/8" (47.6) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 315/16" (100.0) 51/16" (128.6) 61/4" (158.7) 73/8" (187.3) 81/4" (209.5) 91/4" (234.9) 103/8" (263.5) 111/2" (292.1) 1313/16" (350.8) Note: Not for continuous cycling applications. C in. (mm) 43/4" (120.6) 6" 65/8" 71/4" 77/8" 93/16" 103/8" 125/8" 1415/16" 173/8" (152.4) (168.3) (184.1) (200.0) (233.4) (263.5) (320.7) (379.4) (441.3) 19" 203/4" 2311/16" 257/8" 319/16" (482.6) (527.0) (601.7) (657.2) (801.7) D in. (mm) 23/8" 33/16" 31/2" 33/4" (60.3) (81.0) (88.9) (95.2) 4" (101.6) 49/16" (115.9) 51/16" (128.6) 61/16" (154.0) 73/16" (182.6) 83/8" (212.7) 83/4" (222.2) 93/4" (247.6) 117/16" (290.5) 121/4" (311.1) 15" (381.0) E in. (mm) 17/16" (36.5) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" 21/16" 21/4" 21/4" (50.8) (52.4) (57.1) (57.1) 2" (50.8) 211/16" (68.3) 21/2" (63.5) 31/2" (88.9) F in. (mm) 27/8" (73.0) 31/4" (82.5) 37/8" (98.4) 43/8" (111.1) 47/8" (123.8) 515/16" (150.8) 7" (177.8) 9" (228.6) 111/8" (282.6) 133/8" (339.7) 141/2" (368.3) 163/8" (415.9) 183/8" (466.7) 203/8" (517.5) 245/8" (625.5) Maximum O.D. Covering in. (mm) 25/8" (66.7) 3" (76.2) 35/8" (92.1) 41/8" (104.8) 411/16" (119.1) 53/4" (146.0) 63/4" (171.4) 83/4" (222.2) 103/4" (273.0) 13" (330.2) 141/4" (361.9) 161/8" (409.6) 181/8" (460.4) 201/8" (511.2) 243/8" (619.1) Design Load lbs. (kN) 150 (.67) 225 (1.00) 310 (1.38) 390 (1.73) 475 (2.11) 685 (3.04) 780 (3.47) 780 (3.47) 965 (4.29) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1400 (6.23) 1600 (7.11) 1800 (8.00) Approx. Wt./100 Lbs. (kg) 123 (55.8) 178 (80.7) 206 (93.4) 267 (121.1) 344 (156.0) 600 (272.1) 800 (362.9) 1300 (589.7) 1600 (725.7) 2600 (1179.3) 3400 (1542.2) 3900 (1769.0) 4900 (2222.6) 6686 (3032.7) 11630 (5275.3) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel yoke and hardware are available for most sizes (B3110NM-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 109 Eaton Pipe Rollers & Roller Supports B3114 - Pipe Roll with Sockets Size Range: 2" (25mm) thru 30" (750mm) pipe Material: Cast iron roller and steel axle (Non-metallic polyurethane rollers are available) Function: For supporting pipe where expansion may occur due to thermal movement. Double rod design provides support for greater loads. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, B Type 42, 2" (50mm) thru 24" (600mm), and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 41 Note: When pipe line is insulated, total outside diameter of pipe and covering D should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. C E Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Note: Not for continuous cycling applications. D Center of pipe to center of axle. E Center of axle to bottom of socket. A (Rod Size) Hanger Rod and Nuts Not Included Part No. B3114-2 B3114-21/2 B3114-3 B3114-31/2 B3114-4 B3114-5 B3114-6 B3114-8 B3114-10 B3114-12 B3114-14 B3114-16 B3114-18 B3114-20 B3114-24 B3114-30 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) Rod Size A 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 11/4"-7 11/2"-6 11/2"-6 B in. (mm) 25/8" (66.7) 31/8" (79.4) 33/4" (95.2) 41/4" (107.9) 43/4" (120.6) 513/16" (147.6) 67/8" (174.6) 87/8" (225.4) 11" (279.4) 13" (330.2) 141/4" (361.9) 161/4" (412.7) 181/4" (463.5) 201/4" (514.3) 241/4" (615.9) 301/4" (768.3) C in. (mm) 41/8" (104.8) 47/8" (123.8) 51/2" (139.7) 61/8" (155.6) 63/4" (171.4) 81/16" (204.8) 99/16" (242.9) 1115/16" (303.2) 141/16" (357.2) 1513/16" (401.6) 173/4" (450.8) 193/4" (501.6) 217/8" (555.6) 241/4" (615.9) 287/8" (733.4) 351/2" (901.7) D in. (mm) 19/16" (39.7) 17/8" (47.6) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 315/16" (100.0) 51/16" (128.6) 61/4" (158.7) 73/8" (187.3) 81/4" (209.5) 91/4" (234.9) 103/8" (263.5) 111/2" (292.1) 1313/16" (350.8) 171/4" (438.1) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with hot-dip galvanized sockets and stainless steel hardware are available for most sizes (B3114NM-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Pipe Supports Part No. B3114-2 B3114-21/2 B3114-3 B3114-31/2 B3114-4 B3114-5 B3114-6 B3114-8 B3114-10 B3114-12 B3114-14 B3114-16 B3114-18 B3114-20 B3114-24 B3114-30 Eaton E in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 2" (50.8) Max. O.D. Covering in. (mm) 33/4" (82.5) 33/4" (95.2) 41/2" (114.3) 5" (127.0) 57/8" (149.2) 7" (177.8) 81/4" (209.5) 101/2" (266.7) 123/4" (323.8) 143/4" (374.6) 161/4" (412.7) 18" (457.2) 201/4" (514.3) 221/2" (571.5) 261/2" (673.1) 321/2" (825.5) Design Load Lbs. (kN) 600 (2.67) 660 (2.93) 700 (3.11) 750 (3.33) 750 (3.33) 750 (3.33) 1070 (4.76) 1350 (6.00) 1730 (7.69) 2400 (10.67) 3130 (13.92) 3970 (17.66) 4200 (18.68) 4550 (20.24) 6160 (27.40) 7290 (32.42) Approx. Wt./100 Lbs. (kg) 119 (54.0) 140 (63.5) 158 (71.6) 170 (77.1) 188 (85.3) 246 (111.6) 504 (228.6) 658 (298.4) 849 (385.1) 1200 (544.3) 2289 (1038.3) 2497 (1132.6) 2899 (1315.0) 3637 (1649.7) 5664 (2569.2) 9437 (4280.6) 36" (900) available upon request. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 110 B-Line series Pipe Hangers & Supports Pipe Rollers & Roller Supports B3122 - Adjustable Roller Support Size Range: 2" (25mm) thru 24" (750mm) pipe Material: Cast iron roller and steel axle (Non-metallic polyurethane rollers are available) Function: Designed for suspending pipe where longitudinal movement and vertical adjustment is required. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 42, 2" (50mm) thru 24" (600mm), and Manufacturers Standardization Society ANSI/MSS SP-69 & E SP-58, Type 41 Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Plain. Contact customer service for alternative finishes and materials. F Furnished With: B3114 Roller, two support rods and eight HN Hex Nuts -- not assembled. Order By: Part number, pipe size and finish Note: Not for continuous cycling applications. Part No. B3122-2 B3122-21/2 B3122-3 B3122-31/2 B3122-4 B3122-5 B3122-6 B3122-8 B3122-10 B3122-12 B3122-14 B3122-16 B3122-18 B3122-20 B3122-24 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Rod Size A 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 11/4"-7 11/2"-6 B in. (mm) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 18" (457.2) 18" (457.2) 18" (457.2) 24" (609.6) C in. (mm) 41/8" (104.8) 47/8" (123.8) 51/2" (139.7) 61/8" (155.6) 63/4" (171.4) 81/16" (204.8) 99/16" (242.9) 1115/16" (303.2) 141/16" (357.2) 1513/16" (401.6) 173/4" (450.8) 193/4" (501.6) 217/8" (555.6) 241/4" (615.9) 287/8" (733.4) D in. (mm) 25/8" (66.7) 31/8" (79.4) 33/4" (95.2) 41/4" (107.9) 43/4" (120.6) 513/16" (147.6) 67/8" (174.6) 87/8" (225.4) 11" (279.4) 13" (330.2) 141/4" (361.9) 161/4" (412.7) 181/4" (463.5) 201/4" (514.3) 241/4" (615.9) D B A (Rod Size) C B Length of rod C Center to center distance of rod. D Length of Roller E Center of axle to center of pipe. F Center of axle to bottom of socket. Part No. B3122-2 B3122-21/2 B3122-3 B3122-31/2 B3122-4 B3122-5 B3122-6 B3122-8 B3122-10 B3122-12 B3122-14 B3122-16 B3122-18 B3122-20 B3122-24 E in. (mm) 19/16" (39.7) 17/8" (47.6) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 315/16" (100.0) 51/16" (128.6) 61/4" (158.7) 73/8" (187.3) 81/4" (209.5) 97/16" (239.7) 101/2" (266.7) 111/2" (292.1) 1313/16" (350.8) F in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) Design Load Lbs. (kN) 600 (2.67) 660 (2.93) 700 (3.11) 750 (3.33) 750 (3.33) 750 (3.33) 1070 (4.76) 1350 (6.00) 1730 (7.69) 2400 (10.67) 3130 (13.92) 3970 (17.66) 4200 (18.68) 4550 (20.24) 6160 (27.40) Approx. Wt./100 Lbs. (kg) 194 (88.0) 284 (128.8) 302 (137.0) 314 (142.4) 438 (198.7) 495 (224.5) 867 (393.3) 1176 (533.4) 1368 (620.5) 1861 (844.1) 3116 (1413.4) 3550 (1610.3) 4328 (1963.2) 5241 (2377.3) 7773 (3525.8) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with hot-dip galvanized sockets and stainless steel hardware are available for most sizes (B3122NM-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 111 Eaton Pipe Rollers & Roller Supports B3122A - Adjustable Double Roller Guide Size Range: 2" (50mm) thru 24" (600mm) pipe Material: Cast iron roller and steel axle (Non-metallic polyurethane rollers are available) Function: Designed for supporting and guiding pipe where longitudinal movement and vertical adjustment are required. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 42, 2" (50mm) thru 24" (600mm), and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 41 Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. E Finish: Plain. Contact customer service for alternative finishes and materials. Furnished With: B3114 Roller, two support rods and twelve HN Hex Nuts -- not assembled. Order By: Part number, pipe size and finish F Note: Not for continuous cycling applications. Part No. B3122A-2 B3122A-21/2 B3122A-3 B3122A-31/2 B3122A-4 B3122A-5 B3122A-6 B3122A-8 B3122A-10 B3122A-12 B3122A-14 B3122A-16 B3122A-18 B3122A-20 B3122A-24 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Rod Size A 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 11/4"-7 11/2"-6 B in. (mm) 12" (304.8) 14" (355.6) 14" (355.6) 14" (355.6) 18" (457.2) 18" (457.2) 24" (609.6) 24" (609.6) 30" (762.0) 30" (762.0) 36" (914.4) 36" (914.4) 42" (1066.8) 42" (1066.8) 48" (1219.2) C in. (mm) 41/8" (104.8) 47/8" (123.8) 51/2" (139.7) 61/8" (155.6) 63/4" (171.4) 81/16" (204.8) 99/16" (242.9) 1115/16" (303.2) 141/16" (357.2) 1513/16" (401.6) 173/4" (450.8) 193/4" (501.6) 217/8" (555.6) 241/4" (615.9) 287/8" (733.4) D in. (mm) 25/8" 31/8" 33/4" 41/4" 43/4" 513/16" 67/8" 87/8" (66.7) (79.4) (95.2) (107.9) (120.6) (147.6) (174.6) (225.4) 11" (279.4) 13" 141/4" 161/4" 181/4" 201/4" 241/4" (330.2) (361.9) (412.7) (463.5) (514.3) (615.9) D B A (Rod Size) C B Length of rod C Center to center distance of rod. D Length of Roller E Center of axle to center of pipe. F Center of axle to bottom of socket. Pipe Rollers & Pipe Supports Part No. B3122A-2 B3122A-21/2 B3122A-3 B3122A-31/2 B3122A-4 B3122A-5 B3122A-6 B3122A-8 B3122A-10 B3122A-12 B3122A-14 B3122A-16 B3122A-18 B3122A-20 B3122A-24 E in. (mm) 19/16" (39.7) 17/8" (47.6) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 315/16" (100.0) 51/16" (128.6) 61/4" (158.7) 73/8" (187.3) 81/4" (209.5) 97/16" (242.9) 101/2" (266.7) 111/2" (292.1) 1313/16" (350.8) F in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) Design Load Lbs. (kN) 600 (2.67) 660 (2.93) 700 (3.11) 750 (3.33) 750 (3.33) 750 (3.33) 1070 (4.76) 1350 (6.00) 1730 (7.69) 2400 (10.67) 3130 (13.92) 3970 (17.66) 4200 (18.68) 4550 (20.24) 6160 (27.40) Approx. Wt./100 Lbs. (kg) 323 (146.5) 465 (210.9) 501 (227.2) 525 (238.1) 757 (343.4) 872 (395.5) 1687 (765.2) 2277 (1032.8) 2830 (1283.7) 3817 (1731.4) 6513 (2954.3) 6759 (3065.9) 7518 (3410.1) 11222 (5090.3) 17666 (8013.3) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with hot-dip galvanized sockets and stainless steel hardware are available for most sizes (B3122ANM-Pipe Size). Contact Eaton Engineering for more information. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 112 B-Line series Pipe Hangers & Supports Pipe Rollers & Roller Supports B3120 - Roller Chair Size Range: 2" (50mm) thru 24" (600mm) pipe Material: Cast iron roller and steel axle/base (Non-metallic polyurethane rollers are available) Function: For supporting pipe where movement may occur due B to thermal expansion. Used when ceiling suspension is impractical. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 45 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 44. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Steel Size Finish: Plain. Contact customer service for alternative finishes and A materials. Order by: Part number, pipe size and finish Note: Not for continuous cycling applications. A Center to center of mounting holes B Overall Bolt Length C Center of axle to bottom of steel strap. E E Center of axle to center of pipe. C D Bolt Size (Not Included) Part No. B3120-2 B3120-21/2 B3120-3 B3120-31/2 B3120-4 B3120-5 B3120-6 B3120-8 B3120-10 B3120-12 B3120-14 B3120-16 B3120-18 B3120-20 B3120-24 Part No. B3120-2 B3120-21/2 B3120-3 B3120-31/2 B3120-4 B3120-5 B3120-6 B3120-8 B3120-10 B3120-12 B3120-14 B3120-16 B3120-18 B3120-20 B3120-24 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) E in. (mm) 19/16" (39.7) 17/8" (47.6) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 315/16" (100.0) 51/16" (128.6) 61/4" (158.7) 73/8" (187.3) 81/4" (209.5) 91/4" (234.9) 103/8" (263.5) 111/2" (292.1) 133/4" (349.2) A in. (mm) 11/4" (31.7) 11/4" (31.7) 2" (50.8) 2" (50.8) 2" (50.8) 3" (76.2) 31/8" (79.4) 33/8" (85.7) 51/4" (133.3) 51/2" (139.7) 6" (152.4) 8" (203.2) 9" (228.6) 10" (254.0) 12" (304.8) B in. (mm) 45/8" (117.5) 53/8" (136.5) 6" (152.4) 63/4" (171.4) 71/4" (184.1) 87/16" (214.3) 93/4" (247.6) 12" (304.8) 147/16" (366.7) 165/8" (422.3) 181/4" (463.5) 21" (533.4) 23" (584.2) 25" (635.0) 30" (762.0) Steel Size in. (mm) 1/4" x 11/4" (6.3 x 31.7) 1/4" x 11/4" (6.3 x 31.7) 1/4" x 11/4" (6.3 x 31.7) 3/8" x 11/2" (9.5 x 38.1) 3/8" x 11/2" (9.5 x 38.1) 3/8" x 11/2" (9.5 x 38.1) 3/8" x 2" (9.5 x 50.8) 3/8" x 2" (9.5 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) 5/8" x 21/2" (15.9 x 63.5) 5/8" x 21/2" (15.9 x 63.5) 5/8" x 3" (15.9 x 76.2) 3/4" x 3" (19.0 x 76.2) C in. (mm) 11/2" (38.1) 15/8" (41.3) 13/4" (44.4) 21/16" (52.4) 25/16" (58.7) 21/2" (63.5) 23/4" (69.8) 3" (76.2) 35/8" (92.1) 41/8" (104.8) 45/8" (117.5) 5" (127.0) 51/4" (133.3) 53/4" (146.0) 7" (177.8) Recommended Bolt Size D (Not Included) 3/8"-16 x 11/2" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 1/2"-13 x 11/2" 1/2"-13 x 11/2" 1/2"-13 x 11/2" 5/8"-11 x 11/2" 5/8"-11 x 2" 5/8"-11 x 2" 5/8"-11 x 2" 5/8"-11 x 21/2" 5/8"-11 x 21/2" 3/4"-10 x 3" 3/4"-10 x 3" Design Load lbs. (kN) 600 (2.67) 660 (2.93) 700 (3.11) 750 (3.33) 750 (3.33) 750 (3.33) 1070 (4.76) 1350 (6.00) 1730 (7.69) 2400 (10.67) 3130 (13.92) 3970 (17.66) 4200 (18.68) 4550 (20.24) 6160 (27.40) Approx. Wt./100 lbs. (kg) 119 (54.0) 146 (66.2) 172 (78.0) 264 (119.7) 303 (137.4) 401 (181.9) 620 (281.2) 874 (396.4) 1270 (576.1) 1918 (870.0) 2629 (1192.5) 3248 (1473.3) 4120 (1868.8) 5630 (3553.7) 7702 (3493.6) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel chair and hardware are available for most sizes (B3120NM-Pipe Size). Contact Eaton Engineering for more information. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 113 Eaton Pipe Rollers & Pipe Supports Pipe Rollers & Roller Supports B3124 - Roller Support Size Range: 2" (50mm) thru 20" (500mm) pipe Material: Cast iron roller and steel axle/base (Non-metallic polyurethane rollers are available) Function: Designed for supporting pipe where longitudinal movement and vertical adjustment are required. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Note: Not for continuous cycling applications. B Overall Bolt Length C Center of axle to center of pipe. D Overall Stud Height E Center of roller to bottom of chair. C E B Steel Size A (Thread Size) D Part No. B3124-2 to 31/2 B3124-4 to 6 B3124-8 to 10 B3124-12 to 14 B3124-16 to 20 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) Thread Size A 5/8"-11 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 11/8"-7 11/8"-7 11/8"-7 B in. (mm) 43/4" (120.6) 43/4" (120.6) 43/4" (120.6) 43/4" (120.6) 57/8" (149.2) 57/8" (149.2) 57/8" (149.2) 83/4" (222.2) 83/4" (222.2) 111/4" (285.7) 111/4" (285.7) 121/2" (317.5) 121/2" (317.5) 121/2" (317.5) C in. (mm) 13/4" (44.4) 21/8" (54.0) 23/8" (60.3) 25/8" (66.7) 23/4" (69.8) 33/8" (85.7) 4" (101.6) 51/4" (133.3) 63/8" (161.9) 71/2" (190.5) 81/8" (206.4) 93/8" (238.1) 103/8" (263.5) 113/8" (288.9) D in. (mm) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 7" (177.8) 7" (177.8) 8" (203.2) 8" (203.2) 8" (203.2) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel chair and hardware are available for most sizes (B3124NM-Pipe Size). Contact Eaton Engineering for more information. Part No. B3124-2 to 31/2 B3124-4 to 6 B3124-8 to 10 B3124-12 to 14 B3124-16 to 20 E in. (mm) 113/16" (46.0) 2" (50.8) 211/16" (68.3) 31/4" (82.5) 31/2" (88.9) Length of Roller in. (mm) 23/4" (69.8) 33/4" (95.2) 6" (152.4) 8" (203.2) 9" (228.6) Steel Size in. (mm) 3/16" x 11/2" (4.8 x 38.1) 1/4" x 2" (6.3 x 50.8) 3/8" x 2" (9.5 x 50.8) 1/2" x 2" (12.7 x 50.8) 1/2" x 2" (12.7 x 50.8) Design Load Lbs. (kN) 390 (1.73) 600 (2.67) 800 (3.56) 1300 (5.78) 2300 (10.23) Approx. Wt./100 Lbs. (kg) 233 (105.7) 368 (166.9) 919 (416.8) 1660 (753.0) 2250 (1020.6) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 114 B-Line series Pipe Hangers & Supports Pipe Rollers & Pipe Supports B3126 Roller Support Size Range: 2" (50mm) thru 20" (500mm) pipe Material: Steel with Cast Iron Roller (Non-metallic polyurethane rollers are available) Function: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Pipe Rollers & Roller Supports A Center of axle to bottom of plate. B Center of axle to bottom of plate. C Center to center of mounting holes. D Overall width. Steel Size E Hole Size Diameter C B D A Part No. B3126-2 to 31/2 B3126-4 to 6 B3126-8 to 10 B3126-12 to 14 B3126-16 to 20 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) A in. (mm) 17/16" (36.5) 17/16" (36.5) 17/16" (36.5) 17/16" (36.5) 17/16" (36.5) 17/16" (36.5) 17/16" (36.5) 113/16" (46.0) 113/16" (46.0) 27/16" (61.9) 27/16" (61.9) 25/8" (66.7) 25/8" (66.7) 25/8" (66.7) B in. (mm) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 7" (177.8) 7" (177.8) 7" (177.8) 83/4" (222.3) 83/4" (222.3) 121/8" (308.0) 121/8" (308.0) 131/8" (333.4) 131/8" (333.4) 131/8" (333.4) C in. (mm) 311/64" (80.6) 327/64" (86.9) 347/64" (94.8) 363/64" (101.2) 413/64" (106.8) 447/64" (120.2) 517/64" (133.8) 7" (177.8) 81/16" (204.8) 927/32" (250.1) 1015/32" (265.9) 117/8" (301.6) 127/8" (327.1) 137/8" (352.4) D in. (mm) 75/8" (193.7) 75/8" (193.7) 75/8" (193.7) 75/8" (193.7) 85/8" (219.1) 85/8" (219.1) 85/8" (219.1) 103/8" (263.5) 103/8" (263.5) 143/8" (365.1) 143/8" (365.1) 153/8" (390.5) 153/8" (390.5) 153/8" (390.5) Part No. B3126-2 to 31/2 B3126-4 to 6 B3126-8 to 10 B3126-12 to 14 B3126-16 to 20 E in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 13/16" (20.6) 13/16" (20.6) Steel Size in. (mm) 1/4" x 15/8" (6.3 x 41.3) 1/4" x 15/8" (6.3 x 41.3) 1/4" x 15/8" (6.3 x 41.3) 3/8" x 2" (9.5 x 50.8) 3/8" x 2" (9.5 x 50.8) Design Load Lbs. (kN) 390 (1.73) 600 (2.67) 800 (3.56) 1300 (5.78) 2300 (10.23) Approx. Wt./100 Lbs. (kg) 177 (80.3) 231 (104.8) 542 (245.8) 1040 (471.7) 1508 (684.0) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel chair and hardware are available for most sizes (B3126NM-Pipe Size). Contact Eaton Engineering for more information. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 115 Eaton Pipe Rollers & Pipe Supports Pipe Rollers & Roller Supports B218 Pipe Rollers-1/2" (15mm) to 8" (200mm) Pipe Size Range: 1/2" (15mm) thru 8" (200mm) pipe Material: Steel with Malleable Iron Roller Function: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Electro-Galvanized Order By: Part number, pipe size and finish Design Load: 500 Lbs. (2.22kN) Weight: Approx. weight per 100 - 256.0 Lbs. (116.1kg)) Note: If using D.I. pipe refer to page 321 for sizing. Not for continuous cycling applications. Channel and mounting hardware not included. 25/8" (66.7) B A 23/8" (60.3) Reference Chart - A Dimension in. (mm) Pipe Size 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 0" (0.0mm) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 75/8" (193.7) 81/2" (215.9) 9" (228.6) 10" (254.0) 1" (25.4mm) -- -71/4" (184.1) 71/4" (184.1) 71/4" (184.1) 75/8" (193.7) 75/8" (193.7) 8" (203.2) 81/2" (215.9) 81/2" (215.9) 9" (228.6) 9" (228.6) 10" (254.0) 11" (279.4) Insulation Thickness 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) -- -- -- -- -- -- 75/8" (193.7) 75/8" (193.7) 8" (203.2) 81/4" (209.5) -- --- -- 8" (203.2) 8" (203.2) 81/2" (215.9) 81/4" (209.5) 81/2" (215.9) 81/2" (215.9) -- -9" (228.6) 9" (228.6) 81/2" (215.9) 9" (228.6) 10" (254.0) 9" (228.6) 9" (228.6) 10" (254.0) 9" (228.6) 10" (254.0) 10" (254.0) 9" (228.6) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 11" (279.4) 10" (254.0) 11" (279.4) 11" (279.4) 11" (279.4) 11" (279.4) 12" (304.8) Reference Chart - B Dimension in. (mm) Pipe Size 0" (0.0mm) 1" (25.4mm) Insulation Thickness 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 111/16" (68.3) 213/16" (71.4) 215/16" (74.6) 31/8" (79.4) 31/4" (82.5) 39/16" (90.5) 313/16" (96.8) 41/8" (104.8) 43/8" (111.1) 45/8" (117.5) 51/2" (127.0) 51/2" (139.7) 615/16" (160.3) -- -37/8" (98.4) 43/16" (106.4) 43/16" (106.4) 43/8" (111.1) 411/16" (119.1) 47/8" (123.8) 51/16" (128.6) 55/16" (134.9) 59/16" (141.3) 61/16" (154.0) 67/16" (163.5) 73/8" (187.3) -- -43/8" (111.1) 411/16" (119.1) 45/8" (117.5) 47/8" (123.8) 51/16" (128.6) 55/16" (134.9) 59/16" (141.3) 513/16" (147.6) 61/16" (154.0) 67/16" (163.5) 615/16" (176.2) 715/16" (201.6) -- -47/8" (123.8) 51/16" (128.6) 51/8" (130.2) 55/16" (134.9) 55/8" (142.9) 6" (152.4) 61/8" (155.6) 61/4" (158.7) 67/16" (163.5) 7" (177.8) 73/8" (187.3) 87/16" (214.3) -- --- --- --- -53/4" (146.0) 61/16" (154.0) 63/8" (161.9) 67/16" (163.5) 611/16" (169.9) 615/16" (176.2) 73/8" (187.3) 715/16" (201.6) 815/16" (227.0) 3" (76.2mm) -- --- --- --- --- --- --- -10" (254.0) 10" (254.0) 10" (254.0) 11" (279.4) 11" (279.4) -- -- 3" (76.2mm) -- --- --- --- --- --- --- -7" (177.8) 71/4" (184.1) 73/8" (187.3) 77/8" (200.0) 81/2" (215.9) -- -- 4" (101.6mm) -- --- --- --- --- --- --- --- --- --- -12" (304.8) 12" (304.8) -- -- 4" (101.6mm) -- --- --- --- --- --- --- --- --- --- -- 813/16" (223.8) 91/2" (241.3) -- -- Pipe Rollers & Pipe Supports Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 116 B-Line series Pipe Hangers & Supports Pipe Rollers & Roller Supports B219 Pipe Rollers 3/4" (15mm) to 12" (300mm) Pipe Size Range: 1/2" (20mm) thru 12" (300mm) pipe Material: Steel with Malleable Iron Roller Function: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Electro-Galvanized Order By: Part number, pipe size and finish Design Load: 750 Lbs. (3.33kN) Note: If using D.I. pipe refer to page 321 for sizing. Not for continuous cycling applications. Reference Chart - A Dimension Part No. B219 B219-1 B219-2 B219-3 B219-4 B219-5 A in. (mm) 71/4" (184.1) 8" (203.2) 9" (228.6) 10" (254.0) 107/8" (276.2) 115/8" (295.3) Wt./100 Lbs. (kg) 253 (114.7) 258 (117.0) 263 (119.3) 269 (122.0) 274 (124.8) 279 (126.5) Pipe Size 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) Channel and mounting hardware not included. 25/8" (66.7) B A 23/8" (60.3) 0" (0.0) B219 B219 B219 B219 B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-3 B219-4 B219-5 B219 Sizing Chart Insulation Thickness in. (mm) 1" (25.4) 11/2" (38.1) 2" (50.8) 21/2" (63.5) -B219 B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-3 B219-4 B219-5 -- -B219 B219-1 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-4 --- -B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 B219-3 B219-4 B219-5 --- ----B219-2 B219-2 B219-3 B219-3 B219-3 B219-3 B219-4 B219-4 B219-5 --- 3" (76.2) -------B219-3 B219-4 B219-4 B219-4 B219-5 ---- 4" (101.6) ----------B219-5 B219-5 ---- Reference Chart - B Dimension in. (mm) Insulation Thickness Pipe Size 0" (0.0mm) 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 211/16" (68.3) 213/16" (71.4) 215/16" (74.6) 31/8" (79.4) 31/4" (82.5) 39/16" (90.5) 33/4" (95.2) 41/8" (104.8) 41/8" (107.9) 49/16" (115.9) 51/16" (128.6) 57/16" (138.1) 63/8" (161.9) 75/16" (185.7) 81/4" (209.5) -- -37/8" (98.4) 43/16" (106.4) 43/16" (106.4) 47/16" (112.7) 45/8" (117.5) 47/8" (123.8) 51/8" (130.2) 51/4" (133.3) 51/2" (139.7) 61/16" (154.0) 67/16" (163.5) 77/16" (188.9) 83/16" (208.0) -- -- -- -41/2" (114.3) 45/8" (117.5) 45/8" (117.5) 47/8" (123.8) 53/16" (131.8) 51/4" (133.3) 59/16" (141.3) 513/16" (147.6) 61/16" (154.0) 67/16" (163.5) 615/16" (176.2) 715/16" (201.6) -- --- -- -- -47/8" (123.8) 51/16" (128.6) 51/8" (130.2) 51/4" (133.3) 51/2" (139.7) 6" (152.4) 61/16" (154.0) 61/4" (158.7) 67/16" (163.5) 7" (177.8) 73/8" (187.3) 83/8" (212.7) -- --- -- -- --- --- --- -53/8" (146.0) 61/16" (154.0) 63/8" (161.9) 67/16" (163.5) 611/16" (169.9) 615/16" (176.2) 73/8" (187.3) 77/8" (200.0) 9" (228.6) -- --- -- 3" (76.2mm) -- --- --- --- --- --- --- -615/16" (176.2) 71/16" (179.4) 73/8" (187.3) 77/8" (200.0) 815/16" (211.1) -- --- --- -- 4" (101.6mm) -- --- --- --- --- --- --- --- --- --- -815/16" (211.1) 99/16" (242.9) -- --- --- -- Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 117 Eaton Pipe Rollers & Roller Supports B379 Pipe Roller - 6" (150mm) to 18" (450mm) Pipe Size Range: 6" (150mm) thru 18" (450mm) pipe Material: Steel with Malleable Iron Roller Function: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Electro-Galvanized Order By: Part number, pipe size and finish Design Load: 1500 Lbs. (6.67kN) Weight: Approx. weight per 100 - 558.0 Lbs. (253.1kg)) Note: If using D.I. pipe refer to page 321 for sizing. Not for continuous cycling applications. Channel and mounting hardware not included. 4" (101.6) B A Reference Chart - A Dimension in. (mm) Pipe Size 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 0" (0.0mm) 99/16" (242.9) 101/4" (260.3) 11" (279.4) 1111/16" (296.9) 121/16" (306.4) 123/4" (323.8) 131/2" (342.9) 1" (25.4mm) 103/16" (258.8) 111/16" (281.0) 113/4" (298.4) 129/16" (319.1) 127/8" (327.0) 131/2" (342.9) 141/4" (361.9) Insulation Thickness 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 105/8" (269.9) 11" (279.4) 113/8" (288.9) 113/8" (288.9) 113/4" (298.4) 123/16" (309.6) 121/8" (308.0) 121/2" (317.5) 1213/16" (325.4) 127/8" (327.0) 131/4" (336.5) 139/16" (344.5) 133/16" (335.0) 139/16" (344.5) 137/8" (352.4) 137/8" (352.4) 1413/16" (360.4) 141/2" (368.3) 145/8" (371.5) 15" (381.0) 155/16" (388.9) 3" (76.2mm) 113/4" (298.4) 121/2" (317.5) 131/8" (333.4) 137/8" (352.4) 141/4" (361.9) 147/8" (377.8) 155/8" (396.9) Reference Chart - B Dimension in. (mm) Pipe Size 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 0" (0.0mm) 67/8" (174.6) 713/16" (198.4) 813/16" (223.8) 93/4" (247.6) 105/16" (261.9) 115/16" (287.3) 121/4" (311.1) 1" (25.4mm) 77/8" (200.0) 87/8" (225.4) 97/8" (250.8) 1015/16" (277.8) 113/8" (288.9) 125/16" (312.7) 131/4" (336.5) Insulation Thickness 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 83/8" (212.7) 87/8" (225.4) 93/8" (238.1) 93/8" (238.1) 97/8" (250.8) 107/16" (265.1) 107/16" (265.1) 1015/16" (277.8) 113/8" (288.9) 113/8" (288.9) 117/8" (301.6) 125/16" (312.7) 117/8" (301.6) 125/16" (312.7) 1213/16" (325.4) 1213/16" (325.4) 131/4" (336.5) 133/4" (349.2) 133/4" (349.2) 143/16" (360.4) 1411/16" (373.1) 3" (76.2mm) 97/8" (250.8) 1015/16"(277.8) 117/8" (301.6) 1213/16"(325.4) 131/4" (336.5) 141/4" (361.9) 151/8" (384.2) 4" (101.6mm) 121/2" (317.5) 131/4" (336.5) 137/8" (352.4) 145/8" (371.5) 147/8" (377.8) 151/2" (393.7) 165/16" (414.3) 4" (101.6mm) 1015/16" (277.8) 117/8" (301.6) 1213/16" (325.4) 133/4" (349.2) 141/4" (361.9) 151/8" (384.2) 161/16" (408.0) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 118 B-Line series Pipe Hangers & Supports Pipe Rollers & Pipe Supports B479 Pipe Roller - 16" (400mm) to 30" (750mm) Pipe Size Range: 16" (400mm) thru 30" (750mm) pipe Material: Steel with Malleable Iron Roller Function: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. Note: When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. Finish: Electro-Galvanized Order By: Part number, pipe size and finish Design Load: 2000 Lbs. (8.89kN) Weight: Approx. weight per 100 - 889.0 Lbs. (403.2kg) Note: If using D.I. pipe refer to page 321 for sizing. Not for continuous cycling applications. Pipe Rollers & Roller Supports Channel and mounting hardware not included. 4" (101.6) B A 213/16" (71.4) Pipe Rollers & Pipe Supports Reference Chart - A Dimension in. (mm) Pipe Size 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 0" (0.0mm) 153/16" (385.8) 151/2" (393.7) 16" (406.4) 1613/16" (427.0) 1713/16" (452.4) 1" (25.4mm) 155/8" (396.9) 16" (406.4) 163/8" (415.9) 175/16" (439.7) 181/4" (463.5) 11/2" (38.1mm) 157/8" (403.2) 163/16" (411.2) 169/16" (420.7) 171/2" (444.5) 183/8" (466.7) Insulation Thickness 2" (50.8mm) 21/2" (63.5mm) 16" (406.4) 161/4" (412.7) 163/8" (415.9) 169/16" (420.7) 167/8" (428.6) 1615/16" (430.2) 171/2" (444.5) 1711/16" (449.3) 189/16" (471.5) 187/8" (476.2) 3" (76.2mm) 161/2" (419.1) 163/4" (425.4) 173/16" (436.6) 177/8" (454.0) 187/8" (476.2) 4" (101.6mm) 17" (431.8) 173/16" (436.6) 171/2" (444.5) 181/8" (460.4) 191/4" (488.9) Reference Chart - B Dimension in. (mm) Pipe Size 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 0" (0.0mm) 1013/16" (274.6) 117/8" (301.6) 123/16" (325.4) 1413/16" (376.2) 1713/16" (452.4) 1" (25.4mm) 1115/16" (303.2) 1215/16" (328.6) 1315/16" (354.0) 157/8" (403.2) 187/8" (476.2) 11/2" (38.1mm) 123/8" (314.3) 137/16" (341.3) 147/16" (366.7) 163/8" (415.9) 193/8" (492.1) Insulation Thickness 2" (50.8mm) 21/2" (63.5mm) 1215/16" (328.6) 133/8" (339.7) 1315/16" (354.0) 147/16" (366.7) 147/8" (377.8) 157/16" (392.1) 167/8" (428.6) 173/8" (441.3) 197/8" (504.8) 203/8" (517.5) 3" (76.2mm) 1315/16"(354.0) 1415/16"(379.4) 157/8" (403.2) 177/8" (454.0) 205/16" (531.8) 4" (101.6mm) 1415/16" (379.4) 1515/16" (404.8) 1615/16" (430.2) 187/8" (479.4) 2115/16" (557.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 119 Eaton Pipe Rollers & Roller Supports B3117SL Steel Roller Stand Size Range: 2" (50mm) thru 42" (1067mm) Material: Cast Iron Roller and Steel Base (Non-metallic polyurethane rollers are available) Function: Designed to support pipe where movement may occur due to thermal expansion. When used with insulated pipe, see B3160-B3165 pipe covering protection saddle charts for proper sizing on pages 158 thru 163. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 45 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 44. Standard Finish: Plain, Available in Electro-Galvanized and HDG finish or Stainless Steel material Order By: Part number and finish. Note: Not for continuous cycling applications. Part No. B3117SL-2 to 31/2 B3117SL-4 to 6 B3117SL-8 to 10 B3117SL-12 to 14 B3117SL-16 to 20 B3117SL-24 B3117SL-30 B3117SL-36 to 42 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) 42" (1050) A in. (mm) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 21/16" (52.4) 21/16" (52.4) 21/16" (52.4) 37/16" (87.3) 37/16" (87.3) 37/8" (98.4) 37/8" (98.4) 41/4" (107.9) 41/4" (107.9) 41/4" (107.9) 43/8" (111.1) 51/8" (130.2) 53/4" (146.0) 53/4" (146.0) B in. (mm) 83/8" (212.7) 83/8" (212.7) 83/8" (212.7) 83/8" (212.7) 97/8" (250.8) 97/8" (250.8) 97/8" (250.8) 85/8" (219.1) 85/8" (219.1) 1015/16" (277.8) 1015/16" (277.8) 123/8" (314.3) 123/8" (314.3) 123/8" (314.3) 131/2" (342.9) 17" (431.8) 20" (508.0) 20" (508.0) A Center of axle to bottom of plate. E Center of pipe to bottom of base plate. G Dia. 2 Holes F Dia. 4 Holes J H B E A D C Typical for 2 to 6 Roller Stand C in. (mm) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 10" (254.0) 10" (254.0) 10" (254.0) 103/4" (273.0) 103/4" (273.0) 12" (304.8) 12" (304.8) Typical for 8 to 42 Roller Stand D in. (mm) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 41/4" (107.9) 41/4" (107.9) 41/4" (107.9) 5" (127.0) 5" (127.0) 6" (152.4) 6" (152.4) 61/2" (165.1) 61/2" (165.1) 61/2" (165.1) 61/2" (165.1) 8" (203.2) 9" (203.2) 9" (203.2) E in. (mm) 311/16" (93.7) 315/16" (100.0) 41/4" (107.9) 41/2" (114.3) 5" (127.0) 59/16" (141.3) 61/16" (154.0) 813/16" (223.8) 97/8" (250.8) 117/16" (290.5) 121/16" (306.4) 135/8" (346.1) 1411/16" (373.1) 1511/16" (398.5) 1711/16" (449.3) 213/4" (552.4) 255/16" (642.9) 285/16" (719.1) F in. (mm) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 13/16" (20.6) 13/16" (20.6) 13/16" (20.6) 13/16" (20.6) 11/16" (27.0) 13/16" (30.2) 13/16" (30.2) Part No. B3117SL-2 to 31/2 B3117SL-4 to 6 B3117SL-8 to 10 B3117SL-12 to 14 B3117SL-16 to 20 B3117SL-24 B3117SL-30 B3117SL-36 to 42 Dia. G in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) H in. (mm) 37/16" (87.3) 411/16" (119.1) 7" (177.8) 91/16" (230.2) 101/4" (260.3) 113/8" (288.9) 141/4" (361.9) 17" (431.8) J in. (mm) 63/8" (161.9) 77/8" (200.0) 4" (101.6) 53/4" (146.0) 63/4" (171.4) 71/2" (190.5) 10" (254.0) 12" (304.8) Design Load Lbs. (kN) 390 (1.73) 950 (4.22) 2100 (9.34) 3075 (13.68) 4980 (22.15) 6100 (27.13) 7500 (33.36) 12000 (53.37) Approx. Wt./100 Lbs. (kg) 508 (230.4) 631 (286.2) 1271 (576.5) 1994 (904.5) 3423 (1552.7) 4710 (2136.4) 7132 (3235.1) 10386 (4711.1) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel bases are available for most sizes (B3117SLNM-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Pipe Supports Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 120 B-Line series Pipe Hangers & Supports Pipe Rollers & Roller Supports B3118SL Adjustable Roller Stand with Base Plate Size Range: 2" (50mm) thru 30" (750mm) Material: Cast Iron Roller and Steel Base (Non-metallic polyurethane rollers are available) C Center of pipe to bottom of base plate. Function: Designed to support pipe where movement may occur due to thermal expansion. Set screws allow for vertical adjustment. When used with insulated pipe, see B3160-B3165 pipe covering protection saddle charts for proper sizing on pages 158 thru 163. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 47 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 46. D Center to center of mounting holes in bottom plate. E Dia. F Mounting holes in bottom plate. Finish: Plain, Available in Electro-Galvanized and HDG finish or Stainless Steel material AD Order by: Part number and finish. Note: Not for continuous cycling applications. Typical for 2 to 6 Roller Stand C B E Typical for 8 to 30 Roller Stand Part No. B3118SL-2 to 31/2 B3118SL-4 to 6 B3118SL-8 to 10 B3118SL-12 to 14 B3118SL-16 to 20 B3118SL-24 B3118SL-30 Part No. B3118SL-2 to 31/2 B3118SL-4 to 6 B3118SL-8 to 10 B3118SL-12 to 14 B3118SL-16 to 20 B3118SL-24 B3118SL-30 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) A in. (mm) 67/8" (174.6) 67/8" (174.6) 67/8" (174.6) 67/8" (174.6) 81/8" (206.4) 81/8" (206.4) 81/8" (206.4) 105/8" (269.9) 105/8" (269.9) 13" (330.2) 13" (330.2) 145/8" (371.5) 145/8" (371.5) 145/8" (371.5) 153/4" (400.0) 191/4" (488.9) B in. (mm) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 101/2" (266.7) Minimum in. (mm) 43/4" (120.6) 5" (127.0) 55/16" (134.9) 59/16" (141.3) 63/16" (157.2) 63/4" (171.4) 71/4" (184.1) 101/8" (257.2) 113/16" (284.2) 123/4" (323.8) 133/8" (339.7) 153/8" (390.5) 163/8" (415.9) 173/8" (441.3) 191/4" (488.9) 247/16" (620.7) C Maximum in. (mm) 55/8" (142.9) 57/8" (142.9) 63/16" (157.2) 67/16" (163.5) 77/16" (188.9) 8" (203.2) 81/2" (215.9) 1111/16" (296.9) 123/4" (323.8) 141/8" (358.8) 143/8" (365.1) 171/4" (438.1) 181/4" (463.5) 191/4" (488.9) 211/4" (539.7) 2611/16" (677.9) D in. (mm) 37/8" (98.4) 37/8" (98.4) 37/8" (98.4) 37/8" (98.4) 51/8" (130.2) 51/8" (130.2) 51/8" (130.2) 73/8" (187.3) 73/8" (187.3) 91/2" (241.3) 91/2" (241.3) 111/8" (282.6) 111/8" (282.6) 111/8" (282.6) 121/4" (311.1) 153/4" (400.0) E in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) F in. (mm) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 13/8" (34.9) Design Load Lbs. (kN) 390 (1.73) 950 (4.22) 2100 (9.34) 3075 (13.68) 4980 (22.15) 6100 (27.13) 7500 (33.36) Approx. Wt./100 Lbs. (kg) 1100 (498.9) 1310 (594.2) 2725 (1236.0) 3612 (1638.4) 6384 (2895.8) 8437 (3827.0) 12528 (5682.7) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel bases are available for most sizes (B3118LNM-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 121 Eaton Pipe Rollers & Roller Supports B3119SL Roller with Steel Base Plate Size Range: -- 2" (50mm) thru 30" (750mm) pipe Material: -- Steel with Cast Iron Roller (Non-metallic polyurethane rollers are available) Function: -- Designed for the support of pipe with longitudinal movement. Note: -- When pipe line is insulated, total outside diameter of pipe and covering should be used to determine size of hanger; also see B3160 to B3165 on pages 158 thru 163. C Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 46 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 45. B Finish: -- Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Note: Not for continuous cycling applications. D G B Center of pipe to bottom of plate. C Center of pipe to center E of roller. D Length of Roller E Center to center of mounting holes in A bottom plate. F Roller Travel G Dia. 1 hole for sizes 2 thru 6 2 holes for sizes 8 thru 30 Part No. B3119SL-2 to 31/2 B3119SL-4 to 6 B3119SL-8 to 10 B3119SL-12 to 14 B3119SL-16 to 20 B3119SL-24 B3119SL-30 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) Structural Channel Size C4 x 5.4 C5 x 6.7 C6 x 8.2 C8 x 11.5 C8 x 11.5 C8 x 11.5 C10 x 15.3 4 to 6 Roller Stand shown A in. (mm) 43/4" (120.6) 43/4" (120.6) 43/4" (120.6) 43/4" (120.6) 53/4" (146.0) 53/4" (146.0) 53/4" (146.0) 8" (203.2) 8" (203.2) 10" (254.0) 10" (254.0) 11" (279.4) 11" (279.4) 11" (279.4) 12" (304.8) 141/2" (368.3) B in. (mm) 31/16" (77.8) 35/16" (84.1) 35/8" (92.1) 37/8" (98.4) 41/8" (104.8) 411/16" (119.1) 53/16" (131.8) 73/16" (182.6) 81/4" (209.5) 913/16" (249.2) 107/16" (265.1) 117/8" (301.6) 1215/16" (328.6) 1315/16" (354.0) 1513/16" (401.6) 195/8" (498.5) C in. (mm) 115/16" (49.2) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 215/16" (74.6) 31/2" (88.9) 4" (101.6) 53/8" (136.5) 67/16" (163.5) 79/16" (192.1) 83/16" (208.0) 93/8" (238.1) 107/16" (265.1) 117/16" (290.5) 135/16" (338.1) 165/8" (422.3) D in. (mm) 23/4" (69.8) 23/4" (69.8) 23/4" (69.8) 23/4" (69.8) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 6" (152.4) 6" (152.4) 8" (203.2) 8" (203.2) 9" (228.6) 9" (228.6) 9" (228.6) 10" (254.0) 121/2" (317.5) E in. (mm) -------3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6)) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 6" (152.4) Part No. B3119SL-2 to 31/2 B3119SL-4 to 6 B3119SL-8 to 10 B3119SL-12 to 14 B3119SL-16 to 20 B3119SL-24 B3119SL-30 F in. (mm) 13/4" (44.4) 21/2" (63.5) 21/2" (63.5) 35/8" (92.1) 31/8" (79.4) 31/8" (79.4) 41/8" (104.8) Dia. G in. (mm) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 13/16" (20.6) 13/16" (20.6) 13/16" (20.6) 13/16" (20.6) Design Load Lbs. (kN) 390 (1.73) 950 (4.22) 2100 (9.34) 3075 (13.68) 4980 (22.15) 6100 (27.13) 7500 (33.36) Approx. Wt./100 Lbs. (kg) 314 (142.3) 489 (225.9) 950 (430.9) 1741 (789.7) 2018 (915.3) 2175 (986.6) 3510 (1592.1) Note: If using D.I. pipe refer to page 321 for sizing. Non-metallic rollers with stainless steel bases are available for most sizes (B3119LNM-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Pipe Supports Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 122 B-Line series Pipe Hangers & Supports B3264 - Spring Cushion Hanger Size Range: 2" (50mm) thru 30" (750mm) pipe Material: Steel Function: Designed for use with B3114 as a cushion spring for a piping system where vertical movement does not exceed 11/4" (31.7mm). Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 50 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 49. Order By: Part number Pipe Rollers & Roller Supports A (Rod Size) Hanger Rod Not Included C D Includes: 2 Springs 4 Cup Washers Part No. B3264-1 B3264-5 B3264-6 Rod Size A 3/8"-16 3/4"-10 1"-8 Free Height C in. (mm) 3" (76.2) 45/8" (117.5) 47/8" (123.8) D in. (mm) 111/16" (42.8) 25/16" (58.7) 31/4" (82.5) Spring Deflection Per Spring Lbs./In. (kg/mm) 30 (0.5) 707 (12.6) 1600 (28.6) Maximum Load at 1" (25.4mm) Deflection - 2 Springs Lbs. (kN) 78 (.34) 1500 (6.67) 3200 (14.23) Approx. Wt./100 Pair Lbs. (kg) 100 (45.3) 400 (181.4) 700 (317.5) Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 123 Eaton Pipe Rollers & Roller Supports B3114R Long Pattern Pipe Roller Only Size Range: 2" (50mm) thru 30" (750mm) pipe Material: Cast Iron (Non-metallic polyurethane rollers are available) Function: Designed for supporting pipe runs with longitudinal movement. Use with steel axle rod. Finish: Plain Order By: Part number and finish. Notes: If using D.I. pipe refer to page 321 for sizing. Non-metallic roller with stainless steel axle sleeve are available for most sizes (BFP3114R-Pipe Size). Contact Eaton Engineering for more information. C Center of axle to center of pipe. B A L C D Axle Dia Part No. B3114R-2 B3114R-21/2 B3114R-3 B3114R-31/2 B3114R-4 B3114R-5 B3114R-6 B3114R-8 B3114R-10 B3114R-12 B3114R-14 B3114R-16 B3114R-18 B3114R-20 B3114R-24 B3114R-30 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) A in. (mm) 11/16" (27.0) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 119/32" (40.5) 17/8" (47.6) 21/8" (54.0) 25/8" (66.7) 33/16" (81.0) 33/4" (95.2) 43/8" (111.1) 45/8" (117.5) 51/8" (130.2) 55/8" (142.9) 63/4" (171.4) 81/2" (215.9) B in. (mm) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 11/2" (38.1) 13/4" (44.4) 2" (50.8) 21/2" (63.5) 21/2" (63.5) 23/4" (69.8) 3" (76.2) 35/8" (92.1) 41/2" (114.3) C in. (mm) 19/16" (39.7) 17/8" (47.6) 23/16" (55.6) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 315/16" (100.0) 51/16" (128.6) 61/4" (158.7) 73/8" (187.3) 81/4" (209.5) 91/4" (234.9) 103/8" (263.5) 111/2" (292.1) 1313/16" (350.8) 171/4" (438.1) Axle Dia. D in. (mm) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 13/4" (44.4) L in. (mm) 25/8" (66.7) 31/8" (79.4) 33/4" (95.2) 41/4" (107.9) 43/4" (120.6) 513/16" (147.6) 67/8" (174.6) 87/8" (225.4) 11" (279.4) 13" (330.2) 141/4" (361.9) 161/4" (412.7) 181/4" (463.5) 201/4" (514.3) 241/4" (615.9) 301/4" (768.3) Approx. Wt./100 Lbs. (kg) 29 (13.1) 47 (21.3) 62 (28.1) 71 (32.2) 96 (43.5) 131 (59.4) 207 (93.9) 323 (146.5) 482 (218.6) 854 (387.4) 1150 (521.6) 1200 (544.3) 1550 (703.1) 2080 (943.5) 3300 (1496.9) 6200 (2812.3) Pipe Rollers & Pipe Supports Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 124 B-Line series Pipe Hangers & Supports B3117R - Short Pattern Pipe Roller Only Size Range: 2" (50mm) thru 42" (1050mm) pipe Material: Cast Iron (Non-metallic polyurethane rollers are available) Function: Designed for supporting pipe runs with longitudinal movement. Use with steel axle rod. Finish: Plain Order By: Part number and finish. Notes: If using D.I. pipe refer to page 321 for sizing. Non-metallic roller with stainless steel axle sleeve are available for most sizes (BFP3117R-Pipe Size). Contact Eaton Engineering for more information. Pipe Rollers & Roller Supports D A Axle Dia L Part No. B3117R-2 to 31/2 B3117R-4 to 6 B3117R-8 to 10 B3117R-12 to 14 B3117R-16 to 20 B3117R-24 B3117R-30 B3117R-36 to 42 Pipe Size in. (mm) 2" to 31/2" (50 to 90) 4" to 6" (100 to 150) 8", 10" (200 to 250) 12", 14" (300 to 350) 16" to 20" (400 to 500) 24" (600) 30" (750) 36" to 42" (900 to 1050) Axle Dia. A in. (mm) 1/2" (12.7) 1/2" (12.7) 3/4" (19.0) 7/8" (22.2) 11/8" (28.6) 11/4" (31.7) 13/4" (44.4) 2" (50.8) D in. (mm) 17/8" (47.6) 21/16" (52.4) 31/4" (82.5) 4" (101.6) 41/2" (114.3) 47/16" (112.7) 51/2" (139.7) 6" (152.4) L in. (mm) 23/4" (69.8) 33/4" (95.2) 6" (152.4) 8" (203.2) 9" (228.6) 10" (254.0) 121/2" (317.5) 147/8" (377.8) Approx. Wt./100 Lbs. (kg) 70 (31.7) 114 (51.7) 329 (149.2) 600 (272.1) 781 (354.2) 842 (381.9) 1385 (628.2) 1585 (718.9) Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 125 Eaton Pipe Supports, Guides, Shields & Saddles Supports, Guides, Shields & Saddles Pipe supports offered in this section are designed to support pipe from a base structure where vertical adjustment may be required. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion and contraction of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation. Materials Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, DURA GREENTM and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper plated, or in Stainless Steel. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. All pipe supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. See pipe data charts on pages 321 thru 325 for proper size selection. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 126 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3380 thru B3387 360� Calcium Silicate Shield Pre-Insulated Support Standard Temperature Type Size Range: Up to 24" (600mm) Material: Asbestos-free, Hydrous Calcium Silicate Insulation with Pre-Galvanized steel jacket Function: Designed to provide a crush resistant insulation insert at pipe support points. Can be used with hangers or straps. Standard type has functionality for both chilled water and hot water. Miscellaneous Information: Flame retardant, water and rot resistant, temperature range from -20�F (-29�C) to 1200�F (649�C). Easily installed in a pipe hanger or mounted to strut. Order By: Part number. (See part number legend below.) For additional information, contact factory. Applications Pipe Hanger Strut Mounted B338 0 CT - 3 Prefix B338 Commercial Duty, All Purpose Support * * Other models available Consult Factory Insulation Thickness 0 = 1/2" (13mm) 2 = 1" (25mm) 3 = 11/2" (38mm) 4 = 2" (51mm) 6 = 3" (76mm) 7 = 4" (101mm) Pipe Type CT = Copper Tubing Sizes Blank = Std. Sch. 40 Steel Pipe Size Nominal Pipe or Copper Tubing Size Note: Up to 24" (600mm) pipe size All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 127 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3088 - Base Stand Size Range: 3/4" (20mm) thru 6" (150mm) pipe Material: Steel Function: Designed as an unthreaded base stand for pipe supports B3090, B3094, B3095, B3096, B3097 and B3098. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, height and finish. **Height from top of pipe to bottom of plate. **Specify Height Plate Size Stand Pipe Size H 4 Holes A A Note: Match B3088 part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts. Part No. B3088-3/4 B3088-1 B3088-11/4 B3088-11/2 B3088-2 B3088-21/2 B3088-3 B3088-4 B3088-6 Plate Size in. (mm) 1/4" x 6" x 6" (6.3 x 152.4 x 152.4) 1/4" x 6" x 6" (6.3 x 152.4 x 152.4) 1/4" x 6" x 6" (6.3 x 152.4 x 152.4) 1/4" x 6" x 6" (6.3 x 152.4 x 152.4) 1/4" x 6" x 6" (6.3 x 152.4 x 152.4) 3/8" x 8" x 8" (9.5 x 203.2 x 203.2) 3/8" x 12" x 12" (9.5 x 203.2 x 203.2) 1/2" x 12" x 12" (12.7 x 304.8 x 304.8) 1/2" x 18" x 18" (12.7 x 304.8 x 304.8) *Based on a height of 18" (457.2mm). Stand Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) 6" (150) A in. (mm) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) Dia. H in. (mm) 3/4" (14.3) 3/4" (14.3) 3/4" (14.3) 3/4" (14.3) 3/4" (14.3) 13/16" (14.3) 13/16" (20.6) 15/16" (23.8) 11/8" (28.6) Approx. Wt./100* Lbs. (kg) 420 (190.5) 480 (216.0) 590 (267.6) 655 (297.1) 1211 (549.3) 2376 (1077.7) 3137 (1422.9) 4338 (1967.7) 7378 (3346.6) B3088T - Threaded Base Stand Size Range: 1" (25mm) thru 4" (100mm) pipe Material: Steel Function: Designed as a threaded base stand where vertical adjustment is required for pipe supports B3089, B3092, and B3093. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, height and finish. **Height from top of pipe to bottom of plate. **Specify Height Plate Size TL Thread Length Stand Pipe Size H 4 Holes A A Note: Match B3088T part number with dimension 'D' from B3089, B3092, and B3093 charts. Part No. B3088T-1 B3088T-11/4 B3088T-11/2 B3088T-2 B3088T-21/2 B3088T-3 B3088T-4 Plate Size in. (mm) 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 3/8"x 8"x 8" (9.5 x 203.2 x 203.2) 3/8"x 12"x 12" (9.5 x 304.8 x 304.8) 1/2"x 12"x 12" (12.7 x 304.8 x 304.8) Stand Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) A in. (mm) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) B3988T-1 and B3088T-11/4 can not be used with B3089, B3092 , and B3093. *Based on a height of 18" (457.2mm). Dia. H in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 13/16" (20.6) 13/16" (20.6) 15/16" (23.8) TL in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) Approx. Wt./100* Lbs. (kg) 495 (224.5) 583 (264.4) 649 (294.4) 785 (356.1) 1524 (691.3) 2624 (1190.2) 3594 (1630.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 128 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3088S - Seismic Base Stand Size Range: 3/4" (20mm) thru 4" (100mm) pipe Material: Steel Function: Designed as an unthreaded base stand for pipe supports, B3090, B3094, B3095, B3096, B3097 and B3098, to meet requirements of 12X anchor diameter hole spacing for seismic applications. The standard B3088-3 & B3088-6 already meet this requirement. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, height and finish. **Height from top of pipe to bottom of plate. **Specify Height Plate Size Stand Pipe Size H 4 Holes A A Note: Match B3088S part number with dimension 'D' from B3090, B3094, B3095, B3096, B3097 or B3098 charts. Part No. B3088S-3/4 B3088S-1 B3088S-11/4 B3088S-11/2 B3088S-2 B3088S-21/2 B3088S-4 Plate Size in. (mm) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 3/8" x 81/2" x 81/2" (9.5 x 215.9 x 215.9) 1/2" x 131/2" x 131/2" (12.7 x 342.9 x 342.9) *Based on a height of 18" (457.2mm). Stand Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (20) 11/2" (32) 2" (50) 21/2" (65) 4" (100) A in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 11/4" (31.7) 11/2" (38.1) Dia. H in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 15/16" (23.8) Approx. Wt./100* Lbs. (kg) 618 (280.3) 708 (321.1) 798 (362.0) 858 (389.2) 993 (450.4) 1638 (743.0) 4202 (1906.0) B3088ST - Threaded Seismic Base Stand Size Range: 1" (25mm) thru 4" (100mm) pipe Material: Steel Function: Designed as a threaded base stand where vertical adjustment is required for pipe supports B3089, B3092, and B3093, to meet requirements of 12X anchor diameter hole spacing for seismic applications. The standard B3088T-3 & B3088T-6 already meet this requirement. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, height and finish. **Height from top of pipe to bottom of plate. **Specify Height Plate Size TL Thread Length Stand Pipe Size H 4 Holes A A Note: Match B3088ST part number with dimension 'D' from B3089, B3092, and B3093 charts. Part No. B3088ST-1 B3088ST-11/4 B3088ST-11/2 B3088ST-2 B3088ST-21/2 B3088ST-4 Plate Size in. (mm) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 3/8" x 81/2" x 81/2" (9.5 x 215.9 x 215.9) 1/2" x 131/2" x 131/2" (12.7 x 342.9 x 342.9) *Based on a height of 18" (457.2mm). Stand Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 4" (100) A in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 11/4" (31.7) 11/2" (38.1) Dia. H in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 15/16" (23.8) TL in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) Approx. Wt./100* Lbs. (kg) 708 (321.1) 798 (362.0) 858 (389.2) 993 (450.4) 1638 (743.0) 4202 (1906.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 129 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3096 - Adjustable Pipe Saddle Support Size Range: Size 2" (505mm) thru 12" (300mm) pipe Material: Steel Function: Designed to support horizontal pipe from floor stanchion where vertical adjustment is required. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 39 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 38. Maximum Temperature: 650�F (343�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Steel Size A Thread Size Hex Nut Included 8" (203.2) Shank will fit into Sch. 40 Pipe Size `D' (not included) Part No. B3096-2 B3096-3 B3096-4 B3096-5 B3096-6 B3096-8 B3096-10 B3096-12 Pipe Size in. (mm) 2" (50) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) Max. Pipe O.D. in. (mm) 23/8" (60.3) 31/2" (88.9) 41/2" (114.3) 59/16" (141.3) 65/8" (168.3) 85/8" (219.1) 103/4" (273.0) 123/4" (323.8) Thread Size A 7/8"-9 7/8"-9 1"-8 1"-8 11/4"-7 11/4"-7 11/2"-6 11/2"-6 D in. (mm) 1" (25) 1" (25) 1" (25) 1" (25) 11/4" (32) 11/4" (32) 11/2" (40) 11/2" (40) Steel Size in. (mm) 3/8" x 2" (9.5 x 50.8) 3/8" x 2" (9.5 x 50.8) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 1/2" x 31/2" (12.7 x 88.9) 1/2" x 31/2" (12.7 x 88.9) 1/2" x 4" (12.7 x 101.6) 1/2" x 4" (12.7 x 101.6) Approx. Wt./100 Lbs. (kg) 212 (96.1) 259 (117.5) 370 (167.8) 404 (183.2) 714 (323.9) 819 (371.5) 1194 (541.6) 1315 (596.5) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 130 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3089 - Pipe Adjuster Size Range: For use with 11/2" (40mm) thru 36" (900mm) pipe Material: Steel Function: Straight threaded shank that permits adjustment after installation Maximum Temperature: 650�F (343�C) Finish: Plain. Contact B-Line for alternative finishes and materials. Order By: Part number and finish Note: If combining a Figure B3089 (Pipe adjuster) with a Figure B3090 (Pipe Support - pages 132 & 133) the catalog number will become a Figure B3092 (see pages 136 & 137). If combining a Figure B3089 (Pipe adjuster) with a Figure B3095 (Pipe Support Saddle - pages 134 & 135) the catalog number will become a Figure B3093 (see pages 138 & 139). B Pipe Size D Nominal pipe size of base stand - not included Part No. B3089-3/4 B3089-11/2 B3089-21/2 B3089-3 B3089-4 To Support Pipe Size in. (mm) 11/2" - 2" (40 - 50) 21/2" - 31/2" (65 - 90) 4" - 12" (100 - 300) 14" - 16" (350 - 400) 18" - 36" (450 - 900) B in. (mm) 3/4" (20) 11/2" (40) 21/2" (65) 3" (80) 4" (100) D in. (mm) 11/2" (40) 21/2" (65) 3" (80) 4" (100) 6" (150) Approx. Wt./100 Lbs. (kg) 140 (63.5) 400 (181.4) 700 (317.5) 1000 (453.6) 2200 (997.9) When determining base stand height, add 6" (152.4mm) to the "C" dimension of the support being utilized on B3090, B3095, B3097, and B3094 pipe and flange supports. This will provide a vertical adjustment capability of 21/4" (57.1mm) each direction. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 131 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3090 - Pipe Support with U-Bolt Size Range: 3/4" (20mm) thru 36" (900mm) pipe Material: Steel Function: Designed to support horizontal pipe from floor stanchion. U-bolts and hex nuts are provided to hold pipe securely to saddle. To complete floor stanchion, use with B3088 pipe stand. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 38 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 37 Maximum Temperature: 750�F (399�) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Note: For vertical adjustment see Figure B3092 (pages 136 & 137) A U-Bolt Dia. C 4" (101.6) Steel Size Gussets on sizes B3090-8 and larger. B (Shank Dia.) C Center of pipe to bottom lip of support. * Shank will fit into nominal Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). Part No. B3090-3/4 B3090-1 B3090-11/4 B3090-11/2 B3090-2 B3090-21/2 B3090-3 B3090-31/2 B3090-4 B3090-5 B3090-6 B3090-8 B3090-10 B3090-12 B3090-14 B3090-16 B3090-18 B3090-20 B3090-24 B3090-30 B3090-36 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Max. O.D. of Pipe in. (mm) 13/8" (34.9) 13/8" (34.9) 111/16" (42.9) 2" (50.8) 27/16" (61.9) 27/8" (73.0) 31/2" (88.9) 4" (101.6) 47/8" (123.8) 55/8" (142.9) 629/32" (175.4) 91/8" (231.8) 113/32" (281.8) 133/16" (335.0) 14" (355.6) 16" (406.4) 18" (457.2) 20" (508.0) 24" (609.6) 30" (762.0) 36" (914.4) Steel Size in. (mm) 1/4" x 11/2" (6.3 x 38.1) 1/4" x 11/2" (6.3 x 38.1) 1/4" x 2" (6.3 x 50.8) 1/4" x 2" (6.3 x 50.8) 1/4" x 2" (6.3 x 50.8) 1/4" x 3" (6.3 x 76.2) 1/4" x 3" (6.3 x 76.2) 1/4" x 3" (6.3 x 76.2) 3/8" x 31/2" (9.5 x 88.9) 3/8" x 31/2" (9.5 x 88.9) 1/2" x 31/2" (12.7 x 88.9) 1/2" x 31/2" (12.7 x 88.9) 1/2" x 31/2" (12.7 x 88.9) 1/2" x 31/2" (12.7 x 88.9) 5/8" x 4" (19.0 x 101.6) 5/8" x 4" (19.0 x 101.6) 3/4" x 5" (19.0 x 127.0) 3/4" x 5" (19.0 x 127.0) 1" x 5" (25.4 x 127.0) 1" x 5" (25.4 x 127.0) 1" x 5" (25.4 x 127.0) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3090DI - size. 3" (80) ductile iron uses B3090-31/2 Not available for 36" (900) ductile iron pipe size A in. (mm) 1/4" (6.4) 1/4" (6.4) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 132 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3090 - Pipe Support with U-Bolt cont. C 4" (101.6) C Center of pipe to bottom lip of support. Note: For vertical adjustment see Figure B3092 (pages 136 & 137) A U-Bolt Dia. Steel Size Gussets on sizes B3090-8 and larger. B (Shank Dia.) * Shank will fit into nominal Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). Part No. B3090-3/4 B3090-1 B3090-11/4 B3090-11/2 B3090-2 B3090-21/2 B3090-3 B3090-31/2 B3090-4 B3090-5 B3090-6 B3090-8 B3090-10 B3090-12 B3090-14 B3090-16 B3090-18 B3090-20 B3090-24 B3090-30 B3090-36 B in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 15/16" (33.3) 15/16" (33.3) 15/16" (33.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 27/8" (73.0) 27/8" (73.0) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) C in. (mm) 2" (50.8) 25/32" (54.8) 221/64" (59.1) 21/2" (63.5) 211/16" (68.3) 31/8" (79.4) 37/16" (87.3) 311/16" (93.7) 41/16" (103.2) 417/32" (115.1) 55/16" (134.9) 63/4" (171.4) 713/16" (198.4) 813/16" (223.8) 109/16" (268.3) 119/16" (293.7) 139/16" (344.5) 149/16" (369.9) 169/16" (420.7) 2011/16" (525.5) 2311/16" (601.7) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3090DI - size. 3" (80) ductile iron uses B3090-31/2 Not available for 36" (900) ductile iron pipe size D * in. (mm) 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) 11/2" (40) 11/2" (40) 11/2" (40) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 3" (80) 3" (80) 4" (100) 4" (100) 4" (100) 4" (100) 4" (100) Approx. Wt./100 Lbs. (kg) 107 (48.5) 117 (53.1) 149 (67.6) 166 (75.3) 186 (84.4) 251 (113.8) 316 (143.3) 317 (143.8) 586 (265.8) 621 (281.7) 895 (406.0) 1115 (505.7) 1423 (645.5) 1846 (837.3) 2593 (1176.2) 2825 (1281.4) 4843 (2196.8) 5225 (2370.0) 6970 (3161.6) 8587 (3895.0) 9977 (4525.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 133 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3095 - Pipe Saddle Support Size Range: 11/2" (40mm) thru 36" (900mm) pipe Material: Steel Function: Designed to support horizontal pipe from floor stanchion. To complete floor stanchion, use with B3088 pipe stand. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 37 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 36 Maximum Temperature: 750�F (399�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish E Steel Size Gussets on sizes B3095-8 and larger. B Note: For vertical adjustment see Figure B3093 (pages 138 & 139) C A Shank Length B Shank Diameter C A Center of pipe to bottom lip of support. * Shank will fit into nominal Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). Part No. B3095-1 B3095-11/4 B3095-11/2 B3095-2 B3095-21/2 B3095-3 B3095-31/2 B3095-4 B3095-5 B3095-6 B3095-8 B3095-10 B3095-12 B3095-14 B3095-16 B3095-18 B3095-20 B3095-24 B3095-30 B3095-36 Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Max. O.D. of Pipe in. (mm) 15/16" (33.3) 111/16" (42.9) 115/16" (49.2) 23/8" (60.3) 27/8" (73.0) 31/2" (88.9) 4" (101.6) 47/8" (123.8) 55/8" (142.9) 7" (177.8) 91/8" (231.8) 111/8" (282.6) 131/2" (342.9) 14" (355.6) 16" (406.4) 18" (457.2) 20" (508.0) 24" (609.6) 30" (762.0) 36" (914.4) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3095DI - size. 3" (80) ductile iron uses B3095-31/2 Not available for 36" (900) ductile iron pipe size A in. (mm) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) B in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 15/16" (33.3) 15/16" (33.3) 15/16" (33.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 27/8" (72.9) 27/8" (72.9) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) C in. (mm) 129/32" (48.4) 25/64" (52.8) 213/64" (55.9) 27/16" (61.9) 29/16" (65.1) 3" (76.2) 314" (82.5) 31/2" (88.9) 41/32" (102.4) 411/16" (119.1) 61/16" (154.0) 73/4" (196.8) 83/4" (222.2) 103/4" (273.0) 113/4" (298.4) 141/2" (368.3) 141/2" (368.3) 173/4" (450.8) 211/4" (539.7) 241/4" (615.9) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 134 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles B3095 - Pipe Saddle Support cont. Pipe Supports, Guides, Shields & Saddles E Steel Size Gussets on sizes B3095-8 and larger. B C A Shank Length B Shank Diameter C A Center of pipe to bottom lip of support. * Shank will fit into nominal Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). Note: For vertical adjustment see Figure B3093 (pages 138 & 139) Part No. B3095-1 B3095-11/4 B3095-11/2 B3095-2 B3095-21/2 B3095-3 B3095-31/2 B3095-4 B3095-5 B3095-6 B3095-8 B3095-10 B3095-12 B3095-14 B3095-16 B3095-18 B3095-20 B3095-24 B3095-30 B3095-36 D * in. (mm) 3/4" (20) 3/4" (20) 3/4" (20) 3/4" (20) 11/2" (40) 11/2" (40) 11/2" (40) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 3" (80) 3" (80) 4" (100) 4" (100) 4" (100) 4" (100) 4" (100) E in. (mm) 11/8" (28.6) 17/16" (36.5) 121/32" (42.0) 21/16" (52.4) 21/2" (63.5) 31/32" (77.0) 37/16" (87.3) 41/4" (107.9) 413/16" (122.2) 61/16" (154.0) 715/16" (201.5) 95/8" (244.5) 1111/16" (296.9) 121/8" (308.0) 137/8" (352.4) 1519/32" (396.1) 175/16" (439.7) 2025/32" (527.8) 26" (660.4) 313/16" (792.2) Approx. Wt./100 Lbs. (kg) 49 (22.2) 81 (36.7) 88 (39.9) 94 (42.6) 167 (75.7) 176 (79.8) 188 (85.3) 364 (165.1) 381 (172.8) 534 (242.2) 796 (361.0) 914 (414.6) 1068 (484.4) 1654 (750.2) 1817 (824.2) 2798 (1269.2) 3018 (1368.9) 3018 (1368.9) 7624 (3458.2) 8877 (4026.6) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3095DI - size. 3" (80) ductile iron uses B3095-31/2 Not available for 36" (900) ductile iron pipe size All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 135 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3092 - Adjustable Pipe Saddle Support with Yoke Size Range: 3/4" (20mm) thru 36" (900mm) pipe Material: Steel with cast iron reducer Function: Designed to support horizontal pipe from floor stanchion where vertical adjustment is required. U-bolt and hex nuts are provided to hold pipe securely to saddle. To complete floor stanchion, use with B3088T threaded pipe stand. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 38 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 37. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Notes: Order with B3088T (page 128) for complete stanchion support. 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3092DI - size. 3" (80) Ductile Iron uses B3092-31/2 Not available for 36" (900) ductile iron pipe size E U-Bolt Dia. C Steel Size B Gussets on sizes B3092-8 and larger. A D A Schedule 40 Pipe Size B Center of pipe to bottom of pipe reducer. C Center of pipe to bottom lip of support. D Nominal pipe size of base stand - Figure B3088T, not included. E U-Bolt Dia. Part No. B3092-3/4 B3092-1 B3092-11/4 B3092-11/2 B3092-2 B3092-21/2 B3092-3 B3092-31/2 B3092-4 B3092-5 B3092-6 B3092-8 B3092-10 B3092-12 B3092-14 B3092-16 B3092-18 B3092-20 B3092-24 B3092-30 B3092-36 Pipe Size in. (mm) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Maximum in. (mm) 13/8" (34.9) 13/8" (34.9) 111/16" (42.9) 2" (50.8) 27/16" (61.9) 27/8" (73.0) 31/2" (88.9) 4" (101.6) 47/8" (123.8) 55/8" (142.9) 629/32" (175.4) 91/8" (231.8) 113/32" (281.8) 133/16" (334.9) 14" (355.6) 16" (406.4) 18" (457.2) 20" (508.0) 24" (609.6) 30" (762.0) 36" (914.4) A in. (mm) 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) 11/2" (40) 11/2" (40) 11/2" (40) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 3" (80) 3" (80) 4" (100) 4" (100) 4" (100) 4" (100) 4" (100) B Minimum in. (mm) Maximum in. (mm) 53/4" (146.0) 101/4" (260.3) 529/32" (150.0) 1013/32" (264.3) 65/64" (154.4) 61/4" (158.7) 1037/64" (268.7) 103/4" (273.0) 67/16" (163.5) 1015/16" (277.8) 67/8" (174.6) 113/8" (288.9) 73/16" (182.6) 1111/16" (296.9) 77/16" (188.9) 1115/16" (303.2) 713/16" (198.4) 125/16" (312.7) 89/32" (210.3) 1225/32" (324.6) 91/16" (230.2) 139/16" (344.5) 101/2" (266.7) 15" (381.0) 119/16" (293.7) 161/16" (408.0) 129/16" (319.1) 171/16" (433.4) 145/16" (363.5) 1813/16" (477.8) 155/16" (388.9) 1913/16" (503.2) 175/16" (439.7) 2113/16" (554.0) 185/16" (465.1) 2213/16" (579.4) 205/16" (515.9) 2413/16" (630.2) 247/16" (620.7) 2815/16" (735.0) 277/16" (696.9) 3115/16" (811.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 136 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3092 - Adjustable Pipe Saddle Support with Yoke cont. E U-Bolt Dia. Steel Size Gussets on sizes B3092-8 and larger. A D A Schedule 40 Pipe Size C B Center of pipe to B bottom of pipe reducer. C Center of pipe to bottom lip of support. D Nominal pipe size of base stand - Figure B3088T, not included. E U-Bolt Dia. Part No. B3092-3/4 B3092-1 B3092-11/4 B3092-11/2 B3092-2 B3092-21/2 B3092-3 B3092-31/2 B3092-4 B3092-5 B3092-6 B3092-8 B3092-10 B3092-12 B3092-14 B3092-16 B3092-18 B3092-20 B3092-24 B3092-30 B3092-36 C in. (mm) 2" 25/32" 221/64" 21/2" 211/16" 31/8" 37/16" 311/16" 41/4" 49/16" 51/2" (50.8) (54.8) (59.1) (63.5) (68.3) (79.4) (87.3) (93.7) (107.9) (115.9) (139.7) 7" (177.8) 8" (203.2) 93/16" (233.4) 109/16" (268.3) 119/16" (293.7) 139/16" (344.5) 149/16" (369.9) 169/16" (420.7) 2011/16" (525.5) 2311/16" (601.7) D in. (mm) 11/2" (38) 11/2" (38) 11/2" (38) 11/2" (38) 11/2" (38) 21/2" (65) 21/2" (65) 21/2" (65) 3" (80) 3" (80) 3" (80) 3" (80) 3" (80) 3" (80) 4" (100) 4" (100) 6" (150) 6" (150) 6" (150) 6" (150) 6" (150) E in. (mm) 1/4" (6.4) 1/4" (6.4) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) Saddle Steel Size in. (mm) 1/4" x 11/2" 1/4" x 11/2" 1/4" x 2" 1/4" x 2" 1/4" x 2" 1/4" x 3" (6.3 x 38.1) (6.3 x 38.1) (6.3 x 50.8) (6.3 x 50.8) (6.3 x 50.8) (6.3 x 76.2) 1/4" x 3" (6.3 x 76.2) 1/4" x 3" 3/8" x 31/2" 3/8" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 1/2" x 31/2" (6.3 x 76.2) (9.5 x 88.9) (9.5 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (12.7 x 88.9) 1/2" x 31/2" (12.7 x 88.9) 5/8" x 4" 5/8" x 4" 3/4" x 5" 3/4" x 5" (15.9 x 101.6) (15.9 x 101.6) (19.0 x 127.0) (19.0 x 127.0) 1" x 5" (25.4 x 127.0) 1" x 5" (25.4 x 127.0) 1" x 5" (25.4 x 127.0) Approx. Wt./100 Lbs. (kg) 247 (112.0) 257 (116.6) 289 (131.1) 306 (138.8) 326 (147.9) 651 (295.3) 716 (324.8) 717 (325.2) 1286 (583.3) 1321 (599.2) 1595 (723.5) 1815 (823.3) 2123 (963.0) 2546 (1154.8) 3593 (1629.8) 3825 (1735.0) 7043 (3194.7) 7425 (3368.0) 9170 (4159.5) 10787 (4893.0) 12177 (5523.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 137 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3093 - Adjustable Pipe Saddle Support Size Range: 1" (25mm) thru 36" (900mm) pipe Material: Steel with cast iron reducer Function: Designed to support horizontal pipe from Steel Size C floor stanchion where vertical adjustment is required. U-bolt and hex nuts are provided to hold pipe Gussets on sizes B securely to saddle. To complete floor stanchion, use with B3088T threaded pipe stand. B3093-8 and larger. A Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 39 and D Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 38. Finish: Plain. Contact customer service for alternative finishes and materials. A Schedule 40 Pipe Size B Order By: Part number and finish Center of pipe to bottom of pipe reducer. Plain Note: Order with B3088T (page 128) for complete C stanchion support. Center of pipe to bottom lip of support. D Nominal pipe size of base stand - Figure B3088T, not included. Part No. B3093-1 B3093-11/4 B3093-11/2 B3093-2 B3093-21/2 B3093-3 B3093-31/2 B3093-4 B3093-5 B3093-6 B3093-8 B3093-10 B3093-12 B3093-14 B3093-16 B3093-18 B3093-20 B3093-24 B3093-30 B3093-36 Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Maximum in. (mm) 15/16" (33.3) 111/16" (42.9) 129/32" (48.4) 23/8" (60.3) 27/8" (73.0) 31/2" (88.9) 4" (101.6) 47/8" (123.8) 59/16" (141.3) 7" (177.8) 91/8" (231.8) 111/8" (282.6) 131/2" (342.9) 14" (355.6) 16" (406.4) 18" (457.2) 20" (508.0) 24" (609.6) 30" (762.0) 36" (914.4) A in. (mm) 3/4" (20) 3/4" (20) 3/4" (20) 3/4" (20) 11/2" (40) 11/2" (40) 11/2" (40) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 21/2" (65) 3" (80) 3" (80) 4" (100) 4" (100) 4" (100) 4" (100) 4" (100) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3093DI - size. 3" (80) ductile iron uses B3093-31/2 Not available for 36" (900) ductile iron pipe size B Minimum Maximum in. (mm) in. (mm) 521/32" (143.6) 553/64" (148.0) 6" (152.4) 63/16" (157.2) 65/16" (160.3) 65/8" (168.3) 67/8" (174.6) 71/4" (184.1) 725/32" (197.6) 87/16" (214.3) 101/4" (260.3) 115/16" (287.3) 121/8" (308.0) 141/2" (368.3) 151/2" (393.7) 171/4" (438.1) 181/4" (463.5) 211/2" (546.1) 245/8" (625.5) 275/8" (701.7) 105/32" (257.9) 1021/64" (2262.3) 101/2" (266.7) 1011/16" (271.5) 1013/16" (274.6) 111/8" (282.6) 113/8" (288.9) 113/4" (298.4) 129/32" (311.9) 1215/16" (328.6) 143/4" (374.6) 1513/16" (401.6) 165/8" (422.3) 19" (482.6) 20" (508.0) 213/4" (552.4) 223/4" (577.8) 26" (660.4) 291/8" (739.8) 321/8" (816.0) C in. (mm) 129/32" (48.4) 25/64" (52.8) 21/4" (58.1) 27/16" (61.9) 29/16" (65.1) 27/8" (73.0) 31/8" (79.4) 31/2" (88.9) 41/32" (102.4) 411/16" (119.1) 61/2" (165.1) 79/16" (192.1) 83/8" (212.7) 103/4" (273.0) 113/4" (298.4) 131/2" (342.9) 141/2" (368.3) 173/4" (450.8) 207/8" (530.2) 237/8" (606.4) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 138 B-Line series Pipe Hangers & Supports Pipe Supports, Guides, Shields & Saddles B3093 - Adjustable Pipe Saddle Support cont. Supports, Guides, Shields & Saddles Electro-Galvanized A Schedule 40 Pipe Size B Center of pipe to Steel Size C bottom of pipe reducer. C Center of pipe to Gussets on sizes B bottom lip of support. B3093-8 and larger. A D Nominal pipe size of base stand - Figure B3088T, not included. D Part No. B3093-1 B3093-11/4 B3093-11/2 B3093-2 B3093-21/2 B3093-3 B3093-31/2 B3093-4 B3093-5 B3093-6 B3093-8 B3093-10 B3093-12 B3093-14 B3093-16 B3093-18 B3093-20 B3093-24 B3093-30 B3093-36 D in. (mm) 11/2" (40) 11/2" (40) 11/2" (40) 11/2" (40) 21/2" (65) 21/2" (65) 21/2" (65) 3" (80) 3" (80) 3" (80) 3" (80) 3" (80) 3" (80) 4" (100) 4" (100) 6" (150) 6" (150) 6" (150) 6" (150) 6" (150) Saddle Steel Size in. (mm) 1/4" x 13/4" (6.3 x 44.4) 1/4" x 13/4" (6.3 x 44.4) 1/4" x 13/4" (6.3 x 44.4) 1/4" x 13/4" (6.3 x 44.4) 1/4" x 3" (6.3 x 76.2) 1/4" x 3" (6.3 x 76.2) 1/4" x 3" (6.3 x 76.2) 1/4" x 4" (6.3 x 101.6) 1/4" x 4" (6.3 x 101.6) 3/8" x 4" (9.5 x 101.6) 3/8" x 4" (9.5 x 101.6) 3/8" x 4" (9.5 x 101.6) 3/8" x 4" (9.5 x 101.6) 3/8" x 5" (9.5 x 127.0) 3/8" x 5" (9.5 x 127.0) 1/2" x 5" (12.7 x 127.0) 1/2" x 5" (12.7 x 127.0) 1/2" x 6" (12.7 x 152.4) 1" x 6" (25.4 x 152.4) 1" x 6" (25.4 x 152.4) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3093DI - size. 3" (80) ductile iron uses B3093-31/2 Not available for 36" (900) ductile iron pipe size Approx. Wt./100 Complete Saddle Only Lbs. (kg) Lbs. (kg) 189 (85.7) 221 (100.2) 228 (103.4) 234 (106.1) 567 (257.2) 576 (261.3) 588 (266.7) 1064 (482.6) 1081 (490.3) 1234 (559.7) 1496 (678.6) 1614 (732.1) 1768 (801.9) 2654 (1203.8) 2817 (1277.8) 4998 (2267.1) 5218 (2366.8) 6346 (2878.5) 9824 (4456.1) 11077 (5024.4) 49 (22.2) 81 (36.7) 88 (39.9) 94 (42.6) 167 (75.8) 176 (79.9) 188 (85.3) 364 (165.1) 381 (172.8) 534 (242.2) 796 (361.1) 914 (414.6) 1068 (484.4) 1654 (750.2) 1817 (824.2) 2798 (1269.1) 3018 (1368.9) 4146 (1880.6) 7624 (3458.2) 8877 (4026.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 139 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3097 - Pipe Saddle Support With Strap Size Range: Size 4" (100mm) thru 36" (900mm) pipe Material: Steel Function: Designed to support horizontal pipe from floor stanchion. Top clamp holds pipe securely to saddle. To complete floor stanchion use with B3088 pipe stand. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 38 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 37. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, pipe size and finish Note: For vertical adjustment use with Figure B3089 (Pipe Adjuster - page 131) and Figure B3088T (Threaded Pipe Stand - page 128). F A C 'A' Gussets on sizes B B3097-8 and larger. F 'E' Shank Diameter A Sizes 4" (100mm) thru * Shank will fit into nominal 12" (300mm) Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). C B 'D' Shank Diameter * Shank will fit into nominal Schedule 40 pipe size 'E' of Base Stand Figure B3088 (not included). Sizes 14" (350mm) thru 36" (900mm) Part No. B3097-4 B3097-5 B3097-6 B3097-8 B3097-10 B3097-12 B3097-14 B3097-16 B3097-18 B3097-20 B3097-22 B3097-24 B3097-26 B3097-30 B3097-32 B3097-36 Pipe Size in. (mm) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 22" (550) 24" (600) 26" (650) 30" (750) 32" (800) 36" (900) A in. (mm) 7" (123.8) 85/8" (141.3) 11" (177.8) 127/8" (231.8) 161/4" (282.6) 181/4" (342.9) 193/4" (355.6) 223/4" (406.4) 257/8" (457.2) 273/4" (508.0) 293/4" (609.6) 33" (609.6) 35" (762.0) 413/8" (762.0) 433/8" (762.0) 473/8" (1203.2) B in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) C in. (mm) 33/16" (65) 43/16" (65) 47/8" (65) 615/16" (65) 715/16" (65) 91/8" (65) 101/2" (80) 111/2" (80) 131/2" (100) 141/2" (100) 151/2" (100) 171/2" (100) 181/2" (100) 205/8" (100) 215/8" (100) 235/8" (600.1) D * in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) E in. (mm) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 27/8" (73.0) 27/8" (73.0) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) F in. (mm) 3/4" (19.0) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 13/8" (34.9) 15/8" (41.3) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) Bolt Size 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 3/4"-10 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 Approx. Wt./100 Lbs. (kg) 1050 (476.4) 1162 (527.1) 1371 (622.0) 1751 (794.4) 2174 (986.3) 2496 (1132.2) 5220 (2367.8) 5965 (2705.6) 7265 (3295.3) 7722 (3502.8) 8336 (3781.3) 9583 (4346.8) 9913 (4496.4) 13778 (6249.6) 14481 (6568.6) 15767 (7151.8) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 140 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3098 - Adjustable Pipe Support With U-Bolt Size Range: 2" (50mm) thru 12" (300mm) pipe Material: Steel Function: Designed to support horizontal pipe from floor stanchion where vertical adjustment is required. U-bolt and hex nuts are provided to hold pipe securely to saddle. Maximum Temperature: 650�F (343�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish C A 8" (202.3) B Part No. B3098-2 B3098-21/2 B3098-3 B3098-31/2 B3098-4 B3098-5 B3098-6 B3098-8 B3098-10 B3098-12 Pipe Size in. (mm) 2" (50) 21/2" (650) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) Max. Pipe O.D. in. (mm) 23/4" (69.8) 31/4" (82.5) 31/2" (88.9) 4" (101.6) 47/8" (123.8) 55/8" (142.9) 7" (177.8) 91/8" (231.8) 111/8" (282.6) 131/2" (342.9) A in. (mm) 6" (152.4) 61/2" (165.1) 63/4" (171.4) 63/4" (171.4) 71/2" (190.5) 73/4" (196.8) 83/8" (212.7) 91/2" (241.2) 10" (254.0) 111/4" (285.7) Bolt Size B 7/8"-9 7/8"-9 7/8"-9 7/8"-9 1"-8 1"-8 11/4"-7 11/4"-7 11/4"-7 11/4"-7 C in. (mm) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) Use With B3088 Pipe Stand 1" 1" 1" 1" 1" 1" 11/4" 11/4" 11/4" 11/4" Approx. Wt./100 Lbs. (kg) 210 (95.2) 219 (99.3) 240 (108.8) 240 (108.8) 340 (154.2) 360 (163.3) 580 (263.1) 640 (290.3) 1060 (480.8) 1060 (480.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 141 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3094 - Flange Support Size Range: 4" (100mm) thru 36" (900mm) pipe Material: Steel Function: Designed to support 125 lb. cast iron and 150 lb. forged steel flanged connections. (Consult factory for other flanged bolt patterns). To complete floor stanchion, use B3088 pipe stand. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 38 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 37. Maximum Temperature: 750�F (399�C) Finish: Plain Note: Available in Electro-Galvanized, and Hot Dip Galvanized finish or Stainless Steel materials. Order By: Part number and finish Note: For vertical adjustment use with Figure B3089 (Pipe Adjuster - page 131) and Figure B3088T (Threaded Pipe Stand - page 128). A C Gussets on sizes B3097-8 and larger. 'E' Shank Diameter * Shank will fit into nominal Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). H B Sizes 4" (100mm) thru 12" (300mm) A C Gussets on sizes B3097-8 and larger. 'E' Shank Diameter * Shank will fit into nominal Schedule 40 pipe size 'D' of Base Stand Figure B3088 (not included). H B Sizes 14" (350mm) thru 36" (900mm) Part No. B3094-4 B3094-5 B3094-6 B3094-8 B3094-10 B3094-12 B3094-14 B3094-16 B3094-18 B3094-20 B3094-24 B3094-30 B3094-36 Pipe Size in. (mm) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) A in. (mm) 63/8" (161.9) 71/16" (179.4) 73/4" (196.8) 99/16" (242.9) 8" (203.2) 91/2" (241.3) 183/16" (462.0) 165/8" (422.3) 1711/16" (449.3) 153/4" (400.0) 183/8" (466.7) 163/8" (415.9) 171/2" (444.5) B in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) C in. (mm) 67/8" (174.5) 73/8" (187.3) 73/8" (187.3) 101/8" (257.2) 113/8" (288.8) 127/8" (327.0) 15" (381.0) 161/4" (412.7) 18" (457.2) 191/4" (488.9) 221/2" (571.5) 257/8" (657.2) 291/2" (749.3) D * in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) E in. (mm) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 27/8" (73.0) 27/8" (73.0) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) 33/4" (95.2) H Dia. in. (mm) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/4" (31.7) 11/4" (31.7) 13/8" (34.9) 13/8" (34.9) 15/8" (41.3) Approx. Wt./100 Lbs. (kg) 707 (320.7) 775 (351.5) 844 (382.8) 1429 (648.2) 1250 (567.0) 1446 (655.9) 3149 (1429.4) 3068 (1391.6) 3339 (1514.6) 2994 (1358.1) 4255 (1930.0) 5210 (2363.2) 5382 (2441.3) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 142 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3195 - I.P.S. Isolator B3195CT - Copper Tubing Isolator Size Range: B3195 - 3/8" (10mm) thru 8" (200mm) pipe B3195CT - 3/8" (10mm) thru 4" (100mm) pipe Material: Pre-Galvanized steel and felt Function: A non-conductive felt lining serves to dampen sound vibration and prevent transmission of sound to the building structure. Finish: Pre-Galvanized Standard Steel Pipe Hangers for use with Isolators: B3100 clevis hanger, B3690 J-hanger and B2000 Series rigid or O.D. pipe clamps Order By: Part number and finish C B A Part No. B3195-3/8 B3195-1/2 B3195-3/4 B3195-1 B3195-11/4 B3195-11/2 B3195-2 B3195-21/2 B3195-3 B3195-31/2 B3195-4 B3195-5 B3195-6 B3195-8 Pipe Size in. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 11/8" (28.6) 13/8" (34.9) 11/2" (38.1) 113/16" (46.0) 21/8" (54.0) 23/8" (60.3) 27/8" (73.0) 33/8" (85.7) 4" (101.6) 41/2" (114.3) 51/2" (139.7) 61/2" (165.1) 75/8" (193.7) 95/8" (244.5) Part No. B3195CT-3/8 B3195CT-1/2 B3195CT-3/4 B3195CT-1 B3195CT-11/4 B3195CT-11/2 B3195CT-2 B3195CT-21/2 B3195CT-3 B3195CT-31/2 B3195CT-4 Pipe Size in. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) A in. (mm) 1" (25.4) 11/8" (28.6) 13/8" (34.9) 15/8" (41.3) 17/8" (47.6) 21/8" (54.0) 25/8" (66.7) 31/8" (79.4) 35/8" (92.1) 41/8" (104.8) 51/8" (130.2) B in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 21/8" (54.0) 21/8" (54.0) B in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) C in. (mm) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 3" (76.2) 3" (76.2) 3" (76.2) 31/2" (88.9) 4" (101.6) 51/2" (139.7) 51/2" (139.7) Hanger Size in. (mm) 1" (25) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) C in. (mm) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 31/2" (88.9) 31/2" (88.9) Hanger Size in. (mm) 3/4" (20) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 3" (80) 31/2" (90) 5" (125) Strut Clamp in. (mm) 1" (25) Rigid 1" (25) Rigid 11/4" (32) O.D. 11/2" (38) O.D. 2" (51) O.D. 2" (50) Rigid 21/2" (65) Rigid 3" (76) O.D. 31/2" (90) Rigid 4" (100) Rigid 5" (125) Rigid 6" (150) Rigid 75/8" (193) O.D. 95/8" (244) O.D. Approx. Wt./100 Lbs. (kg) 4 (1.8) 4 (1.8) 6 (2.7) 10 (4.5) 10 (4.5) 12 (5.4) 14 (6.3) 20 (9.1) 25 (11.3) 36 (16.3) 65 (29.5) 67 (30.4) 196 (88.9) 210 (95.2) Strut Clamp in. (mm) 11/8" (28) O.D. 11/8" (28) O.D. 1" (25) Rigid 11/2" (38) O.D. 13/4" (44) O.D. 21/8" (54) O.D. 25/8" (66) O.D. 31/8" (79) O.D. 3" (80) Rigid 31/2" (90) Rigid 5" (127) O.D. Approx. Wt./100 Lbs. (kg) 4 (1.8) 4 (1.8) 4 (1.8) 6 (2.7) 10 (4.5) 10 (4.5) 12 (5.4) 13 (5.9) 15 (6.8) 28 (12.7) 44 (19.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 143 Eaton Pipe Supports, Guides, Shields & Saddles Supports, Guides, Shields & Saddles B3281 thru B3287 - Pipe Alignment Guide Size Range: For use with 1/2" (15mm) thru 24" (600mm) pipe Material: Steel Finish: Black Primer, HDG Function: Designed for use in directing thermal expansion of insulated or non-insulated pipe in the direction permitted by expansion joints or loops. The use of two or more guides on both sides of an expansion joint or loop is recommended. Pipe lines should be supported with hangers or rollers so that when properly installed, the guides will not be supporting any pipe loads. Maximum operating temperature should not exceed 750oF (399�C). Order By: Part number and finish. For use with copper tubing, add CT suffix to the part number. Body Size 001 002 003 004 005 006 007 008 009 010 011 012 013 014 R in. (mm) 31/2" (88.9) 4" (101.6) 43/8" (111.1) 51/4" (133.3) 61/4" (158.7) 7" (177.8) 77/8" (200.0) 87/8" (225.4) 93/4" (247.6) 107/8" (276.2) 121/8" (308.0) 13" (330.2) 143/4" (374.6) 161/2" (419.1) S in. (mm) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 11/8" (28.6) 11/8" (28.6) T in. (mm) 57/8" (149.2) 63/4" (171.4) 75/8" (193.7) 91/4" (234.9) 115/8" (295.3) 133/8" (339.7) 151/8" (384.2) 17" (431.8) 183/4" (476.2) 21" (533.4) 231/8" (587.4) 25" (635.0) 273/4" (704.8) 311/2" (800.1) X W Overall Width U S Dia. 4 Holes U in. (mm) 41/8" (104.8) 43/8" (111.1) 51/8" (130.2) 61/8" (155.6) 7" (177.8) 81/4" (209.5) 97/8" (250.8) 107/8" (276.2) 117/8" (301.6) 113/4" (298.4) 141/2" (368.3) 151/2" (393.7) 171/8" (435.0) 191/4" (488.9) V in. (mm) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 23/4" (69.8) 23/4" (69.8) 4" (101.6) 4" (101.6) 4" (101.6) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) T Overall Height R Center of pipe to bottom of legs. T VR Body Size 001 002 003 004 005 006 007 008 009 010 011 012 013 014 W in. (mm) 61/8" (155.6) 71/8" (181.0) 81/8" (206.4) 101/8" (257.2) 121/8" (308.0) 141/8" (358.8) 161/8" (409.6) 181/8" (460.4) 201/8" (511.2) 221/8" (562.0) 241/8" (612.8) 261/8" (663.6) 281/8" (714.4) 321/8" (816.0) X in. (mm) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 6" (152.4) 6" (152.4) 6" (152.4) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) Approx. Wt./100 Lbs. (kg) 700 (317.5) 800 (362.9) 900 (408.2) 1100 (498.9) 1700 (771.1) 2000 (907.2) 4000 (1814.4) 4800 (2177.3) 5400 (2449.4) 6100 (2766.9) 8900 (4037.0) 10200 (4626.7) 11000 (4989.6) 15000 (6804.0) Note: CT sizes have lead shims between the steel clamp and the copper tubing. Guides with greater allowable movement available, Contact Eaton Engineering for more information. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 144 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3281 thru B3287 - Pipe Alignment Guide cont. Pipe Size 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) Part No. BS* SAM** Part No. BS* SAM** Part No. BS* SAM** B3281-1/2 001 B3281-3/4 001 4" (101.6) B3281-1/2 001 4" (101.6) B3282-3/4 002 4" (101.6) B3283-1/2 002 4" (101.6) B3283-3/4 003 4" (101.6) 4" (101.6) B3281-1 001 4" (101.6) B3282-1 002 4" (101.6) B3283-1 003 4" (101.6) B3281-11/4 001 4" (101.6) B3282-11/4 002 4" (101.6) B3283-11/4 003 4" (101.6) B3281-11/2 002 4" (101.6) B3281-11/2 002 4" (101.6) B3283-11/2 003 4" (101.6) B3281-2 002 4" (101.6) B3282-2 003 4" (101.6) B3283-2 004 4" (101.6) B3281-21/2 003 4" (101.6) B3281-21/2 003 4" (101.6) B3283-21/2 004 4" (101.6) B3281-3 003 4" (101.6) B3282-3 004 4" ((101.6) B3283-3 004 4" (101.6) B3281-4 004 4" (101.6) B3281-4 004 4" (101.6) B3283-4 005 4" (101.6) B3281-5 005 4" (101.6) B3281-5 005 4" (101.6) B3281-5 005 4" (101.6) B3281-6 005 4" (101.6) B3281-6 005 4" (101.6) B3283-6 006 4" (101.6) B3281-8 006 4" (101.6) B3281-8 006 4" (101.6) B3283-8 007 6" (152.4) B3281-10 008 6" (152.4) B3281-10 008 6" (152.4) B3281-10 008 6" (152.4) B3281-12 009 6" (152.4) B3281-12 009 6" (152.4) B3281-12 009 6" (152.4) B3281-14 010 6" (152.4) B3281-14 010 6" (152.4) B3281-14 010 6" (152.4) B3281-16 011 8" (203.2) B3281-16 011 8" (203.2) B3281-16 011 8" (203.2) B3281-18 012 8" (203.2) B3281-18 012 8" (203.2) B3281-18 012 8" (203.2) B3281-20 013 8" (203.2) B3281-20 013 8" (203.2) B3281-20 013 8" (203.2) B3281-24 014 8" (203.2) B3281-24 014 8" (203.2) B3281-24 014 8" (203.2) 21/2" (63.5mm) Part No. BS* SAM** B3284-1/2 003 B3284-3/4 004 4" (101.6) 4" (101.6) B3284-1 004 4" (101.6) B3284-11/4 004 4" (101.6) B3284-11/2 004 4" (101.6) B3283-2 004 4" (101.6) B3283-21/2 004 4" (101.6) B3284-3 005 4" (101.6) B3284-4 005 4" (101.6) B3284-5 006 4" (101.6) B3283-6 006 4" (101.6) B3284-8 008 6" (152.4) B3284-10 009 6" (152.4) B3284-12 010 6" (152.4) B3281-14 010 6" (152.4) B3281-16 011 8" (203.2) B3281-18 012 8" (203.2) B3281-20 013 8" (203.2) B3281-24 014 8" (203.2) Nominal Pipe Size 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 3" (76.2) Part No. BS* B3285-1/2 004 B3284-3/4 004 B3284-1 004 B3284-11/4 004 B3284-11/2 004 B3285-2 005 B3285-21/2 005 B3284-3 005 B3285-4 006 B3284-5 006 B3285-6 007 B3284-8 008 B3284-10 009 B3284-12 010 B3285-14 011 B3285-16 012 B3285-18 013 B3285-20 014 --- --- SAM** 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) --- --- Insulation Thickness 31/2" (88.9) Part No. BS* SAM** B3285-1/2 004 B3286-3/4 005 B3286-1 005 B3286-11/4 005 B3286-11/2 005 B3285-2 005 B3285-21/2 005 B3286-3 006 B3286-4 006 B3286-5 007 B3286-6 008 B3286-8 009 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 6" (152.4) 6" (152.4) 6" (152.4) B3286-10 010 6" (152.4) B3286-12 011 6" (152.4) B3285-14 011 8" (203.2) B3285-16 012 8" (203.2) B3285-18 013 8" (203.2) B3285-20 014 8" (203.2) --- --- --- --- 4" (101.6) Part No. BS* B3287-1/2 005 B3286-3/4 005 B3286-1 005 B3286-11/4 005 B3286-11/2 005 B3287-2 006 B3287-21/2 006 B3286-3 006 B3287-4 007 B3287-5 008 B3286-6 008 B3286-8 009 B3286-10 010 B3286-12 011 B3287-14 012 B3287-16 013 B3287-18 014 B3285-20 014 --- --- SAM** 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) --- --- BS* = Body Size SAM** = Standard Allowable Movement Note: Use 1" (25.4mm) insulation thickness column when no insulation is present. Installation: Attach outer housing of the first pipe guide to the structure a maximum of four pipe diameters from an expansion joint. The second pipe guide should be located a maximum of 14 pipe diameters from the first pipe guide. The spider pipe clamp should be offset at a minimum of half the distance in the opposite direction of the axial expansion. See chart for Standard Allowable Movement (SAM). All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 145 Eaton Pipe Supports, Guides, Shields & Saddles B2417 - Strut Mounted Pipe Guide Material: Steel Finish: Electro-Galvanized Function: Designed as a guide to permit longitudinal movement of pipe. Order By: Part number and finish. (Includes guide and pipe clamp). Supports, Guides, Shields & Saddles Clearance Part No. B2417-1/2 B2417-3/4 B2417-1 B2417-11/4 B2417-11/2 B2417-2 B2417-21/2 B2417-3 B2417-31/2 B2417-4 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) Min. Radial Clearance in. (mm) 1/16" (1.6) 1/16" (1.6) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 1/8" (3.2) 1/8" (3.2) 5/32" (3.9) 5/32" (3.9) 5/32" (3.9) Includes B2009 B2010 B2034 B2037 B2039 B2043 B2047 B2016 B2017 B2018 Approx. Wt./100 Lbs. (kg) 22 (10.0) 25 (11.3) 30 (13.6) 47 (21.8) 51 (23.1) 62 (28.1) 69 (31.3) 108 (49.0) 118 (53.5) 128 (58.0) Note: Strut Mounted Pipe Guides are available for copper tubing: B2417CT-Size B3147A & B3147B - Pipe Anchor (dimensional charts on following page) Size Range: For use with 1/2" (15mm) thru 24" (600mm) pipe Material: Steel Function: Recommended for anchoring pipe to structure. Finish: Plain Note: 1/2" (15mm) thru 4" (100mm), use U-bolt to fasten chair to support; 5" (125mm) thru 24" (600mm) U-bolt attaches directly to support structure. Holes are provided in chair for fastening to support if required. Available in Electro-Galvanized and Hot Dip Galvanized finish or Stainless Steel materials. Order By: Part number and pipe size 13/16" (30.2mm) x 11/16" (27.0mm) 2 Holes U-Bolt Dia. B C Type A A Center of pipe to bottom of base plate. U-Bolt Dia. D BC Type B Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 146 B-Line series Pipe Hangers & Supports Pipe Supports, Guides, Shields & Saddles B3147A & B3147B - Pipe Anchor cont. Supports, Guides, Shields & Saddles Type A Type A Type B Part No. B3147A-1/2 B3147A-3/4 B3147A-1 B3147A-11/4 B3147A-11/2 B3147A-2 B3147A-21/2 B3147A-3 B3147A-31/2 B3147A-4 B3147B-5 B3147B-6 B3147B-8 B3147B-10 B3147B-12 B3147B-14 B3147B-16 B3147B-18 B3147B-20 B3147B-24 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) U-Bolt Dia. in. (mm) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 3/8" (9.4) 3/8" (9.4) 3/8" (9.4) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 1" (25.4) A in. (mm) 15/16" (23.8) 11/16" (27.0) 13/16" (30.2) 13/8" (34.9) 19/16" (39.7) 13/4" (44.4) 2" (50.8) 23/8" (60.3) 23/8" (60.3) 27/8" (73.0) 37/16" (87.3) 4" (101.6) 51/4" (133.3) 67/16" (164.1) 71/2" (190.5) 83/16" (208.0) 91/4" (234.9) 103/8" (263.5) 113/8" (288.9) 135/8" (346.1) B in. (mm) 23/16" (55.5) 23/8" (60.3) 25/8" (66.7) 27/8" (73.0) 31/4" (82.5) 35/8" (92.1) 415/16" (125.4) 59/16" (141.3) 61/16" (154.0) 69/16" (166.7) 4" (101.6) 5" (127.0) 7" (177.9) 8" (203.2) 9" (228.6) 10" (254.0) 10" (254.0) 11" (279.4) 12" (304.8) 12" (304.8) C in. (mm) 13/16" (30.2) 13/8" (34.9) 15/8" (41.3) 21/16" (52.4) 23/8" (60.3) 23/4" (69.8) 37/16" (87.3) 41/16" (103.2) 49/16" (115.9) 51/16" (128.6) 65/32" (156.3) 73/8" (187.3) 93/8" (138.0) 115/8" (295.2) 133/4" (349.2) 15" (381.0) 17" (431.8) 191/8" (485.8) 211/8" (536.6) 251/8" (638.2) D in. (mm) -- (--) -- (--) -- (--) -- (--) -- (--) -- (--) -- (--) -- (--) -- (--) -- (--) 21/4" (57.1) 3" (76.2) 51/2" (139.7) 51/2" (139.7) 6" (152.4) 7" (177.9) 7" (177.9) 7" (177.9) 7" (177.9) 8" (203.2) Approx. Wt./100 Lbs. (kg) 80 (36.3) 88 (39.9) 96 (43.5) 107 (48.5) 118 (53.5) 132 (59.9) 175 (79.4) 215 (97.5) 240 (108.8) 265 (120.2) 290 (131.5) 315 (142.9) 885 (401.4) 1050 (476.3) 1210 (548.8) 1480 (671.3) 1735 (787.0) 2011 (912.2) 2332 (1057.8) 2550 (1156.7) Type B All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 147 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3256 Hold-Down Anchor Clamp Size Range: 2" (50mm) thru 30" (750mm) pipe Material: Steel Function: Designed to prevent longitudinal or lateral movement of pipe where pipe is anchored to concrete piers or other supporting structures. Finish: Plain or Electro-Galvanized Order By: Part number and finish. Part No. B3256-2 B3256-21/2 B3256-3 B3256-31/2 B3256-4 B3256-5 B3256-6 B3256-8 B3256-10 B3256-12 B3256-14 B3256-16 B3256-18 B3256-20 B3256-24 B3256-30 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (50) 31/2" (80) 4" (90) 5" (100) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) A in. (mm) 15/16" (23.8) 13/16" (30.2) 11/2" (38.1) 13/4" (44.4) 2" (50.8) 29/16" (65.1) 31/16" (77.8) 41/16" (103.2) 51/8" (130.2) 61/8" (155.6) 63/4" (171.4) 73/4" (196.8) 83/4" (222.2) 93/4" (247.6) 113/4" (298.4) 143/4" (374.6) H 2 Holes R CA B B3256-2 thru B3256-8 Steel Size D Steel Size R C A E H 4 Holes B D D B3256-10 thru B3256-30 B in. (mm) 81/8" (206.4) 85/8" (219.1) 91/4" (234.9) 93/4" (247.6) 101/4" (260.3) 115/16" (287.3) 139/16" (346.1) 153/4" (396.9) 183/4" (476.2) 203/4" (527.0) 22" (558.8) 24" (609.6) 26" (660.4) 28" (711.2) 32" (812.8) 38" (965.2) C in. (mm) 57/8" (149.2) 63/8" (161.9) 7" (177.8) 71/2" (190.5) 8" (203.2) 91/16" (230.2) 105/8" (269.9) 125/8" (320.7) 151/4" (387.3) 171/4" (438.1) 181/2" (469.9) 201/2" (520.7) 221/2" (571.2) 241/2" (622.3) 281/2" (723.9) 341/2" (876.3) D in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 3" (76.2) 3" (76.2) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 3" (76.2) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) E in. (mm) --------1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) Part No. B3256-2 B3256-21/2 B3256-3 B3256-31/2 B3256-4 B3256-5 B3256-6 B3256-8 B3256-10 B3256-12 B3256-14 B3256-16 B3256-18 B3256-20 B3256-24 B3256-30 H in. (mm) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) R in. (mm) 13/16" (30.2) 17/16" (36.5) 13/4" (44.4) 2" (50.8) 21/4" (57.1) 213/16" (71.4) 35/16" (84.1) 45/16" (109.5) 53/8" (136.5) 63/8" (161.9) 7" (177.8) 8" (203.2) 9" (228.6) 10" (254.0) 12" (304.8) 15" (381.0) Steel Size in. (mm) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 1/2" x 6" (12.7 x 152.4) 1/2" x 6" (12.7 x 152.4) 1/2" x 8" (12.7 x 203.2) 1/2" x 8" (12.7 x 203.2) 1/2" x 10" (12.7 x 254.0) 1/2" x 10" (12.7 x 254.0) 1/2" x 12" (12.7 x 304.8) 1/2" x 12" (12.7 x 304.8) 1/2" x 12" (12.7 x 304.8) 1/2" x 12" (12.7 x 304.8) Approx. Wt./100 Lbs. (kg) 342 (155.1) 386 (175.1) 434 (196.8) 478 (216.8) 518 (234.9) 610 (276.7) 1961 (889.5) 2397 (1087.3) 4155 (1884.7) 4789 (2172.3) 6421 (2912.5) 7210 (3270.4) 9509 (4313.3) 10434 (4732.8) 12295 (5577.0) 15082 (6841.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 148 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3257 - Base Plate Size Range: 2" (50mm) thru 30" (750mm) pipe Material: Steel Function: Designed as a base plate for B3256 pipe anchor. Finish: Plain or Electro-Galvanized Order By: Part number and finish. Part No. B3257-2 B3257-21/2 B3257-3 B3257-31/2 B3257-4 B3257-5 B3257-6 B3257-8 B3257-10 B3257-12 B3257-14 B3257-16 B3257-18 B3257-20 B3257-24 B3257-30 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) A in. (mm) 81/8" (206.4) 85/8" (219.1) 91/4" (234.9) 93/4" (247.6) 101/4" (260.3) 115/16" (287.3) 135/8" (346.1) 155/8" (396.9) 183/4" (476.2) 203/4" (527.0) 22" (558.8) 24" (609.6) 26" (660.4) 28" (711.2) 32" (812.8) 38" (965.2) BA Steel Size H 4 Holes A H C 2 Holes D Steel Size B3257-2 thru B3257-8 B ED C D B3257-10 thru B3257-30 B in. (mm) 57/8" (149.2) 63/8" (161.9) 7" (177.8) 71/2" (190.5) 8" (203.2) 91/16" (230.2) 105/8" (269.9) 125/8" (320.7) 151/4" (387.3) 171/4" (438.1) 181/2" (469.9) 201/2" (520.7) 221/2" (571.5) 241/2" (622.3) 281/2" (723.9) 341/2" (876.3) C in. (mm) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/2" (38.1) 11/2" (38.1) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) D in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 3" (76.2) 3" (76.2) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) Part No. B3257-2 B3257-21/2 B3257-3 B3257-31/2 B3257-4 B3257-5 B3257-6 B3257-8 B3257-10 B3257-12 B3257-14 B3257-16 B3257-18 B3257-20 B3257-24 B3257-30 E in. (mm) --------5" (127.0) 5" (127.0) 6" (152.4) 6" (152.4) 7" (177.8) 7" (177.8) 7" (177.8) 7" (177.8) H in. (mm) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" (25.4) 1" (25.4) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) Steel Size in. (mm) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 3/8" x 3" (9.5 x 76.2) 1/2" x 6" (12.7 x 152.4) 1/2" x 6" (12.7 x 152.4) 1/2" x 8" (12.7 x 203.2) 1/2" x 8" (12.7 x 203.2) 1/2" x 8" (12.7 x 254.0) 1/2" x 8" (12.7 x 254.0) 1/2" x 12" (12.7 x 304.8) 1/2" x 12" (12.7 x 304.8) 1/2" x 12" (12.7 x 304.8) 1/2" x 12" (12.7 x 304.8) Approx. Wt./100 Lbs. (kg) 246 (111.6) 262 (118.8) 282 (127.9) 298 (135.2) 314 (142.4) 348 (157.8) 1137 (515.7) 1307 (592.8) 2071 (939.4) 2298 (1042.4) 3064 (1389.8) 3347 (1518.2) 4368 (1981.3) 4709 (2136.0) 5389 (2444.4) 6410 (2907.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 149 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3891 - B3897 Pipe Slide Assembly Series B3891 - 10 - CL Base Style 1 2 3 4 5 6 7 Travel 04" (101) (except B3897) 10" (254) (except B3897) 21/2" (63) (B3897 only) Options Standard Slide = Blank W/ End Plates = EP - Pipe Size W/ B3140 Clamps = CL - Pipe Size Material: Tee - Steel; Facing Plate - Stainless Steel Type 304; Base - Steel with 3/32" (2.4mm) thick Teflon� slide pads. Finish: Black paint. Service: Designed to support pipe where horizontal movement from expansion and contraction is present. Fits up to 3" (76.2mm) insulation thickness. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 35. Operating Temperature Rating: 400�F (204�C) maximum Loading: Capable of supporting constant loads up to 2000 Psi at 70�F (21�C). Mark shown in this document is the property of its respective owner. B3891 B3892 B3896 B3897 Options: B3893 B3894 B3895 Notes: B3891, B3892 and B3893 are designed for longitudinal movement only. B3894, B3895 and B3896 are designed for longitudinal and limited transverse movement. B3897 is designed for up to 5 inches (127mm) of horizontal movement in any direction, depending on the installed position. Eaton End Plates Pipe Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 150 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3891 - B3897 - Pipe Slide Assembly Series Pipe Size 1" to 24" (25 to 600) Travel In. (mm) 21/2" (63.5) 4" (127.0) 10" (254.0) Part No. B3897 B3891 B3892 B3893 B3894 B3895 B3896 B3891 B3892 B3893 B3894 B3895 B3896 Height H In. (mm) 55/16" (134.9) 45/8" (117.5) 51/8" (130.2) 51/8" (130.2) 45/8" (117.5) 51/8" (130.2) 51/8" (130.2) 45/8" (117.5) 51/8" (130.2) 51/8" (130.2) 45/8" (117.5) 51/8" (130.2) 51/8" (130.2) Length L In. (mm) 91/2" (241.3) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) Depth B In. (mm) 5" (127.0) 2" (50.8) 4" (101.6) 4" (101.6) 2" (50.8) 4" (101.6) 4" (101.6) 2" (50.8) 4" (101.6) 4" (101.6) 2" (50.8) 4" (101.6) 4" (101.6) Diameter D In. (mm) 4" (101.6) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) N/A (N/A) Pipe Travel Size In. mm 21/2" (63.5) 1" to 24" (25 to 600) 4" (127.0) 10" (254.0) *Based on Teflon� of 500 psi. Part No. B3897 B3891 B3892 B3893 B3894 B3895 B3896 B3891 B3892 B3893 B3894 B3895 B3896 Width P In. mm N/A N/A 4" (101.6) 4" (101.6) 4" (101.6) N/A N/A 6" (152.4) 6" (152.4) 4" (101.6) 4" (101.6) 4" (101.6) N/A N/A 6" (152.4) 6" (152.4) Width W In. mm 91/2" (241.3) N/A N/A 7" (177.8) 7" (177.8) 6" (152.4) 10" (254.0) 10" (254.0) N/A N/A 7" (177.8) 7" (177.8) 6" (152.4) 10" (254.0) 10" (254.0) Max Recommended Load Lbs. kN 16000 (71.2) 12000 (53.4) 12000 (53.4) 12000 (53.4) 12000 (53.4) 24000 (106.8) 24000 (106.8) 12000 (53.4) 12000 (53.4) 12000 (53.4) 12000 (53.4) 24000 (106.8) 24000 (106.8) Mark shown in this document is the property of its respective owner. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 151 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3891 - B3897 - Pipe Slide Assembly Series B3891 & B3894 Views H P Field weld pipe to tee. Stainless steel facing plate on tee - filled Teflon� on base. B3891 Front View Field weld pipe to tee. H Stainless steel facing plate on tee - filled Teflon� on base. W B3894 Front View B3892 & B3895 Views B L B3891 & B3894 Side View Field weld pipe to tee. H 17/16" 1/16" P 1/16" 1/2" W B3892 Front View Field weld pipe to tee. H 17/16" 1" P 1" 1/2" W B3895 Front View B L B3892 & B3895 Side View Stainless steel facing plate on tee - filled Teflon� on base. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 152 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3891 - B3897 - Pipe Slide Assembly Series B3893 & B3896 Views Field weld pipe to tee. 1/2" H 17/16" 1/16" P 1/16" W 1/2" B3893 Front View Field weld pipe to tee. 1/2" H 17/16" P W 1/2" 1" 1" B3896 Front View B3897 Views Stainless steel facing plate on tee - filled B Teflon� on base. L B3893 & B3896 Side View Field weld pipe to tee. H 21/2" B 21/2" L B3897 Front View Stainless steel facing plate on tee - filled Teflon� on disc. 21/2" 21/2" B L B3897 Side View Mark shown in this document is the property of its respective owner. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 153 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3991 - B3993B Pipe Slide Assembly Series Material: Tee & H Slides - Steel with Heat Cured PTFE modified coating at slide plate. Base - Steel with 3/32" (2.4mm) thick Teflon� slide pads. Finish: Black paint. Service: Designed to support pipe where horizontal movement from expansion and contraction is present. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 35. Operating Temperature Rating: 400�F (204�C) maximum at base Loading: Capable of supporting constant loads up to 2000 Psi at 70�F (21�C) Mark shown in this document is the property of its respective owner. B3993 - 5 - 04 - CL Base Style 1 3 3B Pipe Size 5 = 1" (25) - 8" (200) 10 = 10" (250) - 24" (600) Travel 04 = 4" (100) 10 = 10" (250) Options Standard Slide = Blank W/ End Plates = EP - Pipe Size W/ B3140 Clamps = CL - Pipe Size B3993-5 B3993B-5 T-Slide B3991-5 Options: B3993-10 EP (standard slide with end plates) B3993B-10 H-Slide B3991-10 CL (standard slide with pipe clamps) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 154 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3991 - B3993B - Pipe Slide Assembly Series Pipe Size 1" to 24" (25 to 600) Travel In. (mm) 4" (101.6) 10" (254.0) Part No. B3991-5 B3993-5 B3993B-5 B3991-10 B3993-10 B3993B-10 B3991-5 B3993-5 B3993B-5 B3991-10 B3993-10 B3993B-10 Height H In. (mm) 47/16" (112.7) 47/16" (112.7) 411/16" (119.1) 47/8" (123.8) 47/8" (123.8) 51/8" (130.2) 47/16" (112.7) 47/16" (112.7) 411/16" (119.1) 47/8" (123.8) 47/8" (123.8) 51/8" (130.2) Length L In. (mm) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) Depth B In. (mm) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 4" (101.6) 4" (101.6) Width C In. (mm) 81/2" (215.9) N/A N/A 81/2" (215.9) 141/2"(368.3) N/A N/A 141/2"(368.3) 81/2" (215.9) N/A N/A 81/2" (215.9) 141/2"(368.3) N/A N/A 141/2"(368.3) Pipe Size 1" to 24" (25 to 600) Travel In. mm 4" (101.6) 10" (254.0) Part No. B3991-5 B3993-5 B3993B-5 B3991-10 B3993-10 B3993B-10 B3991-5 B3993-5 B3993B-5 B3991-10 B3993-10 B3993B-10 Width P In. mm 6" (152.4) 2" (50.8) 2" (50.8) 12" (304.8) 6" (152.4) 6" (152.4) 6" (152.4) 2" (50.8) 2" (50.8) 12" (304.8) 6" (152.4) 6" (152.4) *Based on Teflon� of 2000 psi. Width W In. mm N/A N/A 41/2" (114.3) 41/2" (114.3) N/A N/A 811/16" (220.7) 811/16" (220.7) N/A N/A 41/2" (114.3) 41/2" (114.3) N/A N/A 811/16" (220.7) 811/16" (220.7) Max Recommended Load Lbs. kN 16000 (71.2) 12000 (53.4) 12000 (53.4) 32000 (142.3) 24000 (106.8) 24000 (106.8) 16000 (71.2) 12000 (53.4) 12000 (53.4) 32000 (142.3) 24000 (106.8) 24000 (106.8) Mark shown in this document is the property of its respective owner. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 155 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3991 - Pipe Slide Assembly Series dimensional drawings Pipe to be field welded to T or H slides. 9/16" (14) See charts on page 155 for H, L, B, C, P & W dimensions H COP H BOP 9/16" (14) 3/4" P 3/4" (19) C (19) B3991-5 Front View B3991-5 (shown) & B3991-10 Side View B L 3/4" (19) Pipe Size In. (mm) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) P 3/4" (19) C B3991-10 Front View `BOP` In. (mm) 41/8" (104.8) 41/4" (107.9) 43/8" (111.1) 43/8" (111.1) 43/8" (111.1) 41/2" (114.3) 45/8" (117.5) `COP' In. (mm) 91/2" (241.3) 105/8" (269.9) 113/8" (288.9) 123/8" (314.3) 133/8" (339.7) 141/2" (368.3) 165/8" (422.3) B3993 Pipe Slide Assembly Series dimensional drawings H P W B3993-5 Front View Pipe to be field welded to T or H slides. See charts on page 155 for H, L, B, C, P & W dimensions B3993-5 (shown) & B3993-10 Side View B L Mark shown in this document is the property of its respective owner. COP H BOP P W B3993-10 Front View Pipe Size In. (mm) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) `BOP` In. (mm) 41/8" (104.8) 41/4" (107.9) 43/8" (111.1) 43/8" (111.1) 43/8" (111.1) 41/2" (114.3) 45/8" (117.5) `COP' In. (mm) 91/2" (241.3) 105/8" (269.9) 113/8" (288.9) 123/8" (314.3) 133/8" (339.7) 141/2" (368.3) 165/8" (422.3) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 156 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3993B Pipe Slide Assembly Series dimensional drawings Pipe to be field welded to T or H slides. See charts on page 155 for H, L, B, C, P & W dimensions 9/16" H (14) 3/4" P 3/4" (19) W (19) C B3993B-5 Front View B3993B-5 (shown) & B3993B-10 Side View B L COP H BOP 9/16" (14) 3/4" P 3/4" (19) W (19) C B3993B-10 Front View Pipe Size In. (mm) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) `BOP` In. (mm) 43/8" (111.1) 41/2" (114.3) 45/8" (117.5) 45/8" (117.5) 45/8" (117.5) 43/4" (120.6) 47/8" (123.8) `COP' In. (mm) 93/4" (247.6) 107/8" (276.2) 115/8" (295.3) 125/8" (320.7) 135/8" (346.1) 143/4" (374.6) 167/8" (428.6) Mark shown in this document is the property of its respective owner. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 157 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3160 thru B3165 - Pipe Covering Protection Saddle Material: Steel; Stainless Steel available Standard Finish: Plain or Electro-Galvanized Service: Designed to protect pipe insulation on high temperature pipe lines. Saddles are 12" (304.8mm) long. Center rib is furnished on all saddle sizes 12" (300mm) and above. Order By: Part number and finish. Select part number by insulation thickness and add nominal pipe size (Ex: B3161-11/4 PLN). Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 40A and Type 40B and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 Type 39A and Type 39B. 12" (304.8) Sizes 3/4" (20mm) thru 10" (250mm) Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) Part Number B3160 B3161 B3162 B3163 B3164 B3165 12" (304.8) Sizes 12" (300mm) and larger Part No. B3160-3/4 B3161-3/4 B3162-3/4 B3160-1 B3161-1 B3162-1 B3160-11/4 B3161-11/4 B3162-11/4 B3163-11/4 B3160-11/2 B3161-11/2 B3162-11/2 B3163-11/2 B3160-2 B3161-2 B3162-2 B3163-2 B3164-2 B3165-2 B3160-21/2 B3161-21/2 B3162-21/2 B3163-21/2 B3164-21/2 B3165-21/2 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) Size For Roller Part Number B3114 B3120 B3122 B3122A 2 3 4 21/2 3 4 21/2 31/2 4 5 3 31/2 5 6 31/2 4 5 6 8 10 31/2 5 6 8 8 12 B3117SL B3118SL B3119SL B3124 B3126 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 4-6 2-31/2 2-31/2 4-6 4-6 2-31/2 2-31/2 4-6 4-6 4-6 8-10 2-31/2 4-6 4-6 4-6 4-6 8-10 B3110 21/2 31/2 5 3 4 5 3 5 5 6 31/2 5 6 8 4 5 6 8 8 10 5 6 8 8 10 12 Design Load Lbs. (kN) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1200 (5.34) 1800 (8.00) 1800 (8.00) 1200 (5.34) 1200 (5.34) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1200 (5.34) 1200 (5.34) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) Approx. Wt./100 Lbs. (kg) 122 (55.3) 228 (103.4) 297 (134.7) 156 (70.7) 228 (103.4) 297 (134.7) 156 (70.7) 228 (103.4) 297 (134.7) 342 (155.1) 172 (78.0) 239 (108.4) 311 (141.0) 417 (189.1) 172 (78.0) 239 (108.4) 311 (141.0) 417 (189.1) 441 (200.0) 584 (264.9) 210 (95.2) 268 (121.5) 358 (162.4) 417 (189.1) 459 (208.2) 630 (285.8) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 158 B-Line series Pipe Hangers & Supports Pipe Supports, Guides, Shields & Saddles B3160 thru B3165 - Pipe Covering Protection Saddle cont. Supports, Guides, Shields & Saddles 12" (304.8) Sizes 3/4" (20mm) thru 10" (250mm) C AC B 12" (304.8) Sizes 12" (300mm) and larger Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) 21/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) Part Number B3160 B3161 B3162 B3163 B3164 B3165 Part No. B3160-3/4 B3161-3/4 B3162-3/4 B3160-1 B3161-1 B3162-1 B3160-11/4 B3161-11/4 B3162-11/4 B3163-11/4 B3160-11/2 B3161-11/2 B3162-11/2 B3163-11/2 B3160-2 B3161-2 B3162-2 B3163-2 B3164-2 B3165-2 B3160-21/2 B3161-21/2 B3162-21/2 B3163-21/2 B3164-21/2 B3165-21/2 Pipe Size In. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) Centerline of Pipe to Centerline of Roll A B3114, B3120, B3122, B3122A In. (mm) B B3117SL, B3118SL, B3119SL, B3124, B3126 In. (mm) A B3110 In. (mm) 2" (50.8) 27/16" (61.9) 35/16" (84.1) 25/16" (58.7) 27/8" (73.0) 37/16" (87.3) 29/16" (65.1) 31/8" (79.4) 311/16" (93.7) 41/16" (103.2) 211/16" (68.3) 33/16" (81.0) 39/16" (90.5) 47/16" (112.7) 215/16" (74.6) 37/16" (87.3) 41/8" (104.8) 411/16" (119.1) 51/4" (133.3) 63/8" (161.9) 31/4" (82.5) 37/8" (98.4) 49/16" (115.9) 51/8" (130.2) 57/16" (138.1) 615/16" (176.2) 21/4" (57.1) 27/8" (73.0) 37/16" (87.3) 21/2" (63.5) 3" (76.2) 35/8" (92.1) 211/16" (68.3) 31/4" (82.5) 313/16" (96.8) 41/8" (104.8) 27/8" (73.0) 35/16" (84.1) 313/16" (96.8) 43/8" (111.1) 31/8" (79.4) 35/8" (92.1) 41/8" (104.8) 411/16" (119.1) 53/16" (131.8) 61/2" (165.1) 33/8" (85.7) 315/16" (100.0) 49/16" (115.9) 5" (127.0) 55/16" (134.9) 7" (177.8) 2" (50.8) 23/8" (69.8) 33/8" (85.7) 25/16" (58.7) 27/8" (73.0) 31/2" (88.9) 21/2" (63.5) 31/8" (79.4) 37/16" (87.3) 41/16" (103.2) 27/16" (61.9) 33/16" (81.0) 313/16" (96.8) 41/2" (114.3) 215/16" (74.6) 31/2" (88.9) 41/16" (103.2) 43/4" (120.6) 51/4" (133.3) 63/8" (161.9) 31/2" (82.5) 37/8" (98.4) 45/8" (117.5) 51/8" (130.2) 51/2" (139.7) 615/16" (176.2) Centerline of Pipe to Outside of Saddle C In. (mm) 19/16" 23/16" 23/4" 113/16" 25/16" 27/8" (39.7) (55.6) (69.8) (46.0) (58.7) (73.0) 2" (50.8) 29/16" (65.1) 31/16" (77.8) 37/16" (87.3) 21/8" (54.0) 29/16" (65.1) 31/8" (79.4) 35/8" (92.1) 23/8" (60.3) 27/8" (73.0) 37/16" (87.3) 315/16" (100.0) 41/2" (114.3) 51/2" (139.7) 25/8" (66.7) 31/4" (82.5) 37/8" (98.4) 41/4" (107.9) 49/16" (115.9) 515/16" (150.8) Thickness of Covering (Per ASTM C 585) In. (mm) 7/8" 11/2" 115/16" 11/16" 19/16" 21/8" 15/16" 17/16" 21/8" 27/16" 11/32" 117/32" (22.2) (38.1) (49.2) (27.0) (39.7) (54.0) (23.8) (36.5) (54.0) (61.9) (26.2) (38.9) 2" (50.8) 227/32" (72.2) 11/16" (27.0) 119/32" (40.5) 21/8" (54.0) 25/8" (66.7) 31/8" (79.4) 43/16" (106.4) 11/16" (27.0) 17/8" (47.6) 25/16" (58.7) 27/8" (73.0) 31/16" (77.8) 47/16" (112.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 159 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3160 thru B3165 - Pipe Covering Protection Saddle cont. Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) Part No. B3160-3 B3161-3 B3162-3 B3163-3 B3164-3 B3165-3 B3160-31/2 B3161-31/2 B3162-31/2 B3163-31/2 B3164-31/2 B3160-4 B3161-4 B3162-4 B3163-4 B3164-4 B3165-4 B3160-5 B3161-5 B3162-5 B3163-5 B3164-5 B3165-5 B3160-6 B3161-6 B3162-6 B3163-6 B3164-6 B3165-6 B3160-8 B3161-8 B3162-8 B3163-8 B3164-8 B3165-8 B3160-10 B3161-10 B3162-10 B3163-10 B3164-10 B3165-10 Pipe Size In. (mm) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) Size For Roller Part Number B3114 B3120 B3122 B3122A B3117SL B3118SL B3119SL B3124 B3126 B3110 4 2-31/2 5 5 4-6 6 6 4-6 8 8 4-6 8 8 8-10 10 12 8-10 12 5 4-6 6 6 4-6 8 8 4-6 8 8 8-10 10 10 8-10 10 5 4-6 6 6 4-6 8 8 8-10 8 8 8-10 10 10 8-10 10 10 8-10 12 6 4-6 8 8 4-6 8 8 8-10 10 10 8-10 10 10 8-10 12 12 8-10 14 8 8-10 8 8 8-10 10 10 8-10 10 10 8-10 12 12 8-10 12 14 12-14 16 10 8-10 12 10 8-10 12 10 8-10 12 12 8-10 14 14 12-14 16 16 12-14 18 12 12-14 14 12 12-14 14 14 16-20 16 14 16-20 16 16 16-20 18 18 16-20 20 Part Number B3163 B3164 B3165 Design Load Lbs. (kN) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1200 (5.34) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) 1800 (8.00) Approx. Wt./100 Lbs. (kg) 210 (95.2) 268 (166.9) 358 (162.4) 417 (189.1) 459 (208.2) 600 (272.2) 226 (102.5) 289 (131.1) 364 (165.1) 422 (191.4) 488 (221.3) 226 (102.5) 289 (131.1) 364 (165.1) 422 (191.4) 488 (221.3) 616 (279.4) 250 (113.4) 289 (131.1) 364 (165.1) 422 (191.4) 488 (221.3) 643 (291.6) 387 (175.5) 498 (225.9) 594 (269.4) 694 (314.8) 794 (360.1) 1009 (457.7) 478 (216.8) 554 (251.3) 674 (305.7) 782 (354.7) 893 (405.0) 1089 (494.0) 546 (247.6) 642 (291.2) 750 (340.2) 850 (385.5) 957 (434.1) 1137 (515.7) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 160 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3160 thru B3165 - Pipe Covering Protection Saddle cont. Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) Part Number B3160 B3161 B3162 Insulation Thickness Part Number 21/2" (63.5mm) B3163 C AC B 3" (76.2mm) B3164 4" (101.6mm) B3165 Part No. B3160-3 B3161-3 B3162-3 B3163-3 B3164-3 B3165-3 B3160-31/2 B3161-31/2 B3162-31/2 B3163-31/2 B3164-31/2 B3160-4 B3161-4 B3162-4 B3163-4 B3164-4 B3165-4 B3160-5 B3161-5 B3162-5 B3163-5 B3164-5 B3165-5 B3160-6 B3161-6 B3162-6 B3163-6 B3164-6 B3165-6 B3160-8 B3161-8 B3162-8 B3163-8 B3164-8 B3165-8 B3160-10 B3161-10 B3162-10 B3163-10 B3164-10 B3165-10 Pipe Size In. (mm) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) Centerline of Pipe to Centerline of Roll A B3114 B3114, B3120, B3122, B3122A In. (mm) B B3117ST, B3118SL, B3119SL, B3124, B3126 In. (mm) A of Saddle B3110 In. (mm) 33/8" (85.7) 41/4" (107.9) 415/16" (125.4) 57/16" (138.1) 513/16" (147.6) 7" (177.8) 313/16" (96.8) 43/8" (111.1) 31/2" 45/16" 415/16" 53/8" 6" 71/16" 37/8" 43/8" (88.9) (109.5) (125.4) (136.5) (152.4) (179.4) (98.4) (111.1) 35/8" (91.1) 41/4" (107.9) 415/16" (125.4) 57/16" (138.1) 57/8" (149.2) 7" (177.8) 313/16" (96.8) 43/8" (111.1) 5" (127.0) 51/2" (139.7) 63/16" (157.2) 41/8" (104.8) 411/16" (119.1) 55/16" (134.9) 513/16" (147.6) 67/16" (163.5) 79/16" (192.1) 411/16" (119.1) 55/16" (134.9) 57/8" (149.2) 67/16" (163.5) 7" (177.8) 83/16" (208.0) 51/4" (133.3) 57/8" (149.2) 61/2" (165.1) 71/16" (179.4) 75/8" (193.7) 91/16" (230.2) 61/2" (165.1) 71/16" (179.4) 79/16" (192.1) 85/16" (211.1) 91/16" (230.2) 10" (254.0) 711/16" (195.3) 85/16" (211.1) 9" (228.6) 95/8" (244.5) 101/8" (257.2) 111/4" (285.7) 5" (127.0) 511/16" (144.5) 65/16" (160.3) 41/8" (104.8) 47/16" (112.7) 51/4" (133.3) 6" (152.4) 69/16" (166.7) 75/8" (193.7) 411/16" (119.1) 51/4" (133.3) 61/8" (155.6) 69/16" (166.7) 73/16" (182.6) 83/16" (208.0) 51/4" (133.3) 61/16" (154.0) 65/8" (168.3) 71/8" (181.0) 711/16" (195.3) 815/16" (227.0) 65/8" (168.3) 71/8" (181.0) 75/8" (193.7) 85/16" (211.1) 815/16" (227.0) 915/16" (252.4) 73/4" (196.8) 85/16" (211.1) 87/8" (225.4) 97/16" (239.7) 103/16" (258.8) 113/16" (284.2) 5" (127.0) 59/16" (141.3) 63/16" (157.2) 41/8" (104.8) 43/4" (120.6) 55/16" (134.9) 57/8" (149.2) 67/16" (163.5) 79/16" (192.1) 43/4" (120.6) 55/16" (134.9) 6" (152.4) 67/16" (163.5) 71/8" (181.0) 83/8" (212.7) 51/4" (133.3) 515/16" (150.8) 61/2" (165.1) 71/8" (181.0) 75/8" (193.7) 9" (228.6) 69/16" (166.7) 71/16" (179.4) 75/8" (193.7) 81/2" (215.9) 9" (228.6) 101/16" (255.6) 77/8" (200.0) 87/16" (214.3) 87/8" (225.4) 91/2" (241.3) 103/16" (258.8) 111/4" (285.7) Centerline of Pipe to Outside C In. (mm) 3" (76.2) 39/16" (90.5) 43/16" (106.4) 45/8" (117.5) 415/16" (125.4) 6" (152.4) 33/16" (81.0) 311/16" (93.7) 41/4" (107.9) 45/8" (117.5) 51/4" (133.3) 37/16" (87.3) 4" (101.6) 41/2" (114.3) 415/16" (125.4) 51/2" (139.7) 61/2" (165.1) 315/16" (100.0) 49/16" (115.9) 51/8" (130.2) 59/16" (141.3) 61/8" (155.6) 71/16" (179.4) 41/2" (114.3) 5" (127.0) 59/16" (141.3) 61/16" (154.0) 69/16" (166.7) 73/4" (196.8) 59/16" (141.3) 61/16" (154.0) 69/16" (166.7) 73/16" (182.6) 73/4" (196.8) 811/16" (220.7) 65/8" (168.3) 73/16" (182.6) 711/16" (195.3) 83/16" (208.0) 83/4" (222.2) 93/4" (247.6) Thickness of Covering (Per ASTM C 585) In. (mm) 11/32" (26.2) 19/16" (39.7) 21/16" (52.4) 29/16" (65.1) 31/16" (77.8) 41/8" (104.8) 11/32" (26.2) 19/16" (39.7) 21/16" (52.4) 225/32" (70.6) 31/16" (77.8) 11/16" (27.0) 19/16" (39.7) 21/16" (52.4) 29/16" (65.1) 31/8" (79.4) 41/8" (104.8) 11/32" (26.2) 117/32" (38.9) 21/32" (51.6) 29/16" (65.1) 33/32" (78.6) 45/32" (105.5) 1" (25.4) 11/2" (38.1) 21/16" (52.4) 29/16" (65.1) 31/16" (77.8) 43/16" (106.4) 11/32" (26.2) 19/16" (39.7) 21/16" (52.4) 211/16" (68.3) 33/16" (81.0) 43/16" (106.4) 31/32" (24.6) 15/8" (41.3) 21/8" (54.0) 25/8" (66.7) 31/8" (79.4) 41/8" (104.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 161 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3160 thru B3165 - Pipe Covering Protection Saddle cont. Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) Part No. B3160-12 B3161-12 B3162-12 B3163-12 B3164-12 B3165-12 B3161-14 B3162-14 B3163-14 B3164-14 B3165-14 B3161-16 B3162-16 B3163-16 B3164-16 B3165-16 B3161-18 B3162-18 B3163-18 B3164-18 B3165-18 B3161-20 B3162-20 B3163-20 B3164-20 B3165-20 B3161-24 B3162-24 B3163-24 B3164-24 B3165-24 B3161-30 B3162-30 B3163-30 B3164-30 B3165-30 B3161-36 B3162-36 B3163-36 B3164-36 B3165-36 Pipe Size In. (mm) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Size For Roller Part Number B3114 B3114 B3120, B3122 B3122A B3117SL B3118SL B3119SL B3124, B3126 B3110 14 12-14 16 14 12-14 16 16 16-20 18 16 16-20 18 18 16-20 20 20 16-20 24 16 16-20 18 16 16-20 18 18 16-20 20 18 16-20 20 20 24 24 18 16-20 20 18 16-20 20 20 16-20 24 20 24 24 24 24 24 20 16-20 24 20 24 24 24 24 24 24 24 24 24 24 - 24 24 24 24 24 24 24 24 - 24 24 - 30 30 - 30 30 - 30 30 - 30 30 - 30 30 - 30 30 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - - 36-42 - Part Number B3163 B3164 B3165 Design Load Lbs. (kN) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 5000 (22.24) 7200 (32.02) 7200 (32.02) 7200 (32.02) 5000 (22.24) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) 7200 (32.02) Approx. Wt./100 Lbs. (kg) 688 (312.1) 836 (379.2) 963 (436.8) 1091 (494.9) 1218 (552.5) 1462 (663.1) 828 (375.6) 963 (436.8) 1099 (498.5) 1230 (557.9) 1486 (674.0) 907 (411.4) 1039 (471.3) 1163 (527.5) 1298 (588.8) 1554 (704.9) 979 (444.1) 1107 (502.1) 1230 (557.9) 1362 (617.8) 1617 (733.5) 1043 (473.1) 1171 (531.1) 1294 (586.9) 1430 (648.6) 1689 (766.1) 1179 (534.8) 1306 (592.4) 1442 (654.1) 1562 (708.5) 1821 (826.0) 1370 (621.4) 1502 (681.3) 1640 (743.9) 1761 (798.8) 2008 (910.8) 1574 (713.9) 1701 (771.6) 1857 (842.3) 1961 (889.5) 2216 (1005.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 162 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3160 thru B3165 - Pipe Covering Protection Saddle cont. Insulation Thickness 1" (25.4mm) 11/2" (38.1mm) 2" (50.8mm) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) Part Number B3163 B3164 B3165 Part No. B3160-12 B3161-12 B3162-12 B3163-12 B3164-12 B3165-12 B3161-14 B3162-14 B3163-14 B3164-14 B3165-14 B3161-16 B3162-16 B3163-16 B3164-16 B3165-16 B3161-18 B3162-18 B3163-18 B3164-18 B3165-18 B3161-20 B3162-20 B3163-20 B3164-20 B3165-20 B3161-24 B3162-24 B3163-24 B3164-24 B3165-24 B3161-30 B3162-30 B3163-30 B3164-30 B3165-30 B3161-36 B3162-36 B3163-36 B3164-36 B3165-36 Nominal Pipe Size In. (mm) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Centerline of Pipe to Centerline of Roll A B3114, B3120 B3122, B3122A In. (mm) B B3117SL, B3118SL B3119SL B3124, B3126 In. (mm) A B3110 In. (mm) 815/16" (227.0) 813/16" (223.8) 87/8" (225.4) 99/16" (242.9) 97/16" (239.7) 91/2" (241.3) 101/16" (255.6) 101/8" (257.2) 101/8" (257.2) 105/8" (269.9) 105/8" (269.9) 105/8" (269.9) 113/16" (284.2) 113/16" (284.2) 111/4" (285.7) 125/16" (312.7) 123/16" (309.6) 125/16" (312.7) 101/16" (255.6) 915/16" (252.4) 101/16" (255.6) 105/8" (269.9) 105/8" (269.9) 105/8" (269.9) 113/16" (284.2) 113/16" (284.2) 111/4" (285.7) 113/4" (298.4) 1111/16" (296.9) 113/4" (298.4) 127/8" (327.0) 127/16" (315.9) 127/8" (327.0) 111/8" (282.6) 111/8" (282.6) 113/16" (284.2) 1113/16" (300.0) 1111/16" (296.9) 113/4" (298.4) 125/16" (312.7) 121/8" (308.0) 125/16" (312.7) 127/8" (327.0) 129/16" (319.1) 127/8" (327.0) 1315/16" (354.0) 139/16" (344.5) 1315/16" (354.0) 121/4" (311.1) 121/8" (308.0) 121/4" (311.1) 127/8" (327.0) 121/2" (317.5) 127/8" (327.0) 133/8" (339.7) 13" (330.2) 133/8" (339.7) 1315/16" (354.0) 139/16" (344.5) 1315/16" (354.0) 15" (381.0) 149/16" (369.9) -- -- 133/8" (339.7) 13" (330.2) 133/8" (339.7) 1315/16" (354.0) 131/2" (342.9) 1315/16" (354.0) 147/16" (366.7) 14" (355.6) -- -- 1415/16" (379.4) 149/16" (369.9) -- -- 161/4" (412.7) 157/8" (403.2) -- -- 1511/16" (398.5) 155/16" (388.9) -- -- 161/4" (412.8) 157/8" (403.2) -- -- 163/4" (425.4) 165/16" (414.3) -- -- 173/8" (441.3) 167/8" (428.6) -- -- 187/16" (468.3) 1715/16" (455.6) -- -- -- -- 187/8" (479.4) -- -- -- -- 193/8" (492.1) -- -- -- -- 1915/16" (506.4) -- -- -- -- 201/2" (520.7) -- -- -- -- 211/2" (546.1) -- -- -- -- 221/8" (562.0) -- -- -- -- 225/8" (574.7) -- -- -- -- 233/16" (589.0) -- -- -- -- 2311/16" (601.7) -- -- -- -- 2411/16" (627.1) -- -- C AC B Centerline of Pipe to Outside of Saddle C In. (mm) 75/8" (193.7) 83/16" (208.0) 83/4" (222.2) 91/4" (234.9) 911/16" (246.1) 103/4" (273.0) 811/16" (220.7) 93/16" (233.4) 93/4" (247.6) 101/4" (260.3) 113/16" (284.2) 911/16" (246.1) 101/4" (260.3) 1011/16" (271.5) 111/4" (285.7) 121/4" (311.1) 1011/16" (271.5) 111/4" (285.7) 1111/16" (296.9) 121/4" (311.1) 131/4" (336.5) 1111/16" (296.9) 123/16" (309.6) 1211/16" (322.3) 133/16" (350.8) 141/4" (361.9) 1311/16" (347.7) 143/16" (360.4) 145/8" (377.8) 151/4" (387.3) 161/4" (412.7) 1611/16" (423.9) 173/16" (436.6) 1711/16" (449.3) 183/16" (462.0) 193/16" (487.4) 1911/16" (500.1) 203/16" (512.8) 2011/16" (525.5) 213/16" (538.2) 223/16" (563.6) Thickness of Covering (Per ASTM C 585) In. (mm) 11/16" (27.0) 15/8" (41.3) 21/8" (54.0) 25/8" (66.7) 31/8" (79.4) 41/8" (104.8) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 163 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles Insulation Protection Shields Selection Tables for: B3151 Insulation Protection Shield (Page 166) B3153 Insulation Protection Shield with 'Loc' Tabs (Page 166) B3154 Short Insulation Protection Shield (Page 167) B3155 Short Insulation Protection Shield with 'Loc' Tabs (Page 167) Shield Size Selection Table Nominal Pipe or Tubing Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 1/2" (12.7mm) 1X 2X 2X 3X 3X 4X 5X 6X 7X 8X ----------- 3/4" (19.0mm) 2X 3X 3X 4X 4X 5X 6X 7X 8X 9X ----------- Insulation Thickness 1" (25.4mm) 3X 3X 4X 4X 5X 6X 7X 8X 9X 9X 10Y* 11Y* 13Y* 15Z 17Z 18Z 20Z 22Z 24Z 28Z 11/2" (38.1mm) 5X 5X 6X 7X 7X 8X 9X 9X 10X* 10X* 11Y* 12Y* 14Z 16Z 18Z 19Z 21Z 23Z 25Z 29Z 2" (50.8mm) 7X 7X 8X 8X 9X 9X 10X* 10X* 11X* 11X* 12Y* 13Y* 15Z 17Z 19Z 20Z 22Z 24Z 26Z 30Z 21/2" (63.5mm) ------ 10X* 11X* 11X* 12Y* 12Y* 13Y* 14Z 16Z 18Z 20Z 21Z 23Z 25Z 27Z 31Z 3" (76.2mm) ------ 11X* 11X* 12Y* 13Y* 13Y* 14Z 15Z 17Z 19Z 21Z 22Z 24Z 26Z 28Z 32Z 4" (101.6mm) ------- 13Y* 14Z 15Z 15Z 16Z 17Z 19Z 21Z 23Z 24Z 26Z 28Z 30Z 33Z *When selecting B3154 or B3155, replace 'X' or 'Y' designation with 'Z'. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 164 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles Pipe Hanger Size Selection Table Nominal Pipe or Tubing Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 1/2" (12.7mm) 11/2 2 2 21/2 21/2 3 31/2 4 5 5 ----------- 3/4" (19.0mm) 2 21/2 21/2 3 3 31/2 4 5 5 6 ----------- Insulation Thickness 1" (25.4mm) 21/2 21/2 3 3 31/2 4 5 5 6 6 8 8 10 12 14 16 18 20 22 26 11/2" (38.1mm) 31/2 31/2 4 5 5 5 6 6 8 8 8 10 12 14 16 18 20 22 24 28 2" (50.8mm) 5 5 5 5 6 6 8 8 8 8 10 10 12 16 18 18 20 22 24 28 21/2" (63.5mm) -----8 8 8 10 10 10 12 14 16 18 20 22 24 26 30 3" (76.2mm) -----8 10 10 10 10 12 12 16 18 20 20 22 24 26 30 4" (101.6mm) ------10 12 12 12 14 16 18 20 22 22 24 26 28 32 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 165 Eaton Pipe Supports, Guides, Shields & Saddles Supports, Guides, Shields & Saddles B3151 - Insulation Protection Shield B3153 - Insulation Protection Shield with "Loc" Tabs Material: Steel (Stainless steel available) Function: Designed to protect pipe insulation when used Stock Size with hangers. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 41 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58 Type 40. Finish: Pre-Galvanized Order By: Part number and finish. B3151 Note: See Selection Tables on page 164 for proper sizing. B3153 same dimension as B3151, but with bottom tabs for centering and securing the shield to hanger. Part Part Stock Size No. No. in. (mm) B3151-1X B3151-2X B3151-3X B3151-4X B3151-5X B3151-6X B3151-7X B3151-8X B3151-9X B3151-10X B3151-11X B3151-10Y B3151-11Y B3151-12Y B3151-13Y B3151-14Z B3151-15Z B3151-16Z B3151-17Z B3151-18Z B3151-19Z B3151-20Z B3151-21Z B3151-22Z B3151-23Z B3151-24Z B3151-25Z B3151-26Z B3151-27Z B3151-28Z B3151-29Z B3151-30Z B3153-1X B3153-2X B3153-3X B3153-4X B3153-5X B3153-6X B3153-7X B3153-8X B3153-9X B3153-10X B3153-11X ---------------------- 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 16 Ga. (1.5) 14 Ga. (1.9) 14 Ga. (1.9) 14 Ga. (1.9) 14 Ga. (1.9) 14 Ga. (1.9) 14 Ga. (1.9) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) 12 Ga. (2.6) L in. (mm) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 18" (457.2) 18" (457.2) 18" (457.2) 18" (457.2) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) 24" (609.6) L Shield I.D. (Inside Dia.) Shield 'I.D.' in. (mm) 1.90 (48.2) 2.38 (60.4) 2.88 (73.1) 3.50 (88.9) 4.00 (101.6) 4.50 (114.3) 5.00 (127.0) 5.56 (141.2) 6.64 (168.6) 7.64 (194.0) 8.64 (219.4) 7.64 (194.0) 8.64 (219.4) 9.64 (244.8) 10.76 (273.3) 11.76 (298.7) 12.76 (324.1) 14.00 (355.6) 15.00 (381.0) 16.00 (406.4) 17.00 (431.8) 18.00 (457.2) 19.00 (482.6) 20.00 (508.0) 21.00 (533.4) 22.00 (558.8) 23.00 (584.2) 24.00 (609.6) 25.00 (635.0) 26.00 (660.4) 27.00 (685.8) 28.00 (711.2) Shield I.D. L (Inside Dia.) Stock Size B3153 Approx. Wt./100 Lbs. (kg) 50 (22.7) 62 (28.1) 75 (34.0) 92 (41.7) 104 (47.2) 118 (53.5) 129 (58.5) 147 (66.7) 219 (99.3) 253 (114.7) 286 (129.7) 377 (171.0) 424 (192.3) 475 (215.4) 529 (239.9) 964 (437.3) 1045 (474.0) 1146 (519.8) 1227 (556.5) 1308 (593.3) 1393 (631.8) 2064 (936.2) 2178 (987.9) 2292 (1039.6) 2406 (1091.3) 2520 (1143.1) 2634 (1194.8) 2753 (1248.7) 2862 (1298.2) 2980 (1351.7) 3094 (1403.4) 3208 (1455.1) Pipe Hanger Size in. (mm) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 5" (125) 6" (150) 8" (200) 8" (200) 8" (200) 8" (200) 10" (250) 10" (250) 12" (300) 12" (300) 14" (350) 16" (400) 16" (400) 18" (450) 18" (450) 20" (500) 20" (500) 24" (600) 24" (600) 24" (600) 24" (600) 30" (750) 30" (750) 30" (750) 30" (750) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 166 B-Line series Pipe Hangers & Supports Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles B3154 - Short Insulation Protection Shield B3155 - Short Insulation Protection Shield with "Loc" Tabs Material: Steel (Stainless steel available) Function: Designed for protection of foam, L fiberglass, or high density insulation when used with pipe hangers. Finish: Pre-Galvanized Order By: Part number and finish. Stock Size Note: See Selection Tables on page 164 for proper sizing. B3154 Shield I.D. L (Inside Dia.) Shield I.D. (Inside Dia.) Stock Size B3155 Part No. B3154-1X B3154-2X B3154-3X B3154-4X B3154-5X B3154-6X B3154-7X B3154-8X B3154-9X B3154-10Z B3154-11Z B3154-12Z B3154-13Z B3154-14Z B3154-15Z Part No. B3155-1X B3155-2X B3155-3X B3155-4X B3155-5X B3155-6X B3155-7X B3155-8X B3155-9X B3155-10Z B3155-11Z B3155-12Z B3155-13Z B3155-14Z B3155-15Z B3155 same dimension as B3154 but with bottom tabs for centering and securing the shield to hanger. Stock Size in. (mm) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) 18 Ga. (1.2) L in. (mm) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) Shield 'I.D.' in. (mm) 1.90 (48.2) 2.38 (60.4) 2.88 (73.1) 3.50 (88.9) 4.00 (101.6) 4.50 (114.3) 5.00 (127.0) 5.56 (141.2) 6.64 (168.6) 7.64 (194.0) 8.64 (219.4) 9.64 (244.8) 10.76 (273.3) 11.76 (298.7) 12.76 (324.1) Approx.Wt./100 Pipe Hanger Size Lbs. (kg) in. (mm) 36 (16.3) 11/2" (40) 45 (20.4) 2" (50) 54 (24.5) 21/2" (65) 66 (29.9) 3" (80) 75 (34.0) 31/2" (90) 84 (38.1) 4" (100) 93 (42.2) 5" (125) 105 (47.6) 5" (125) 126 (57.1) 6" (150) 218 (98.9) 8" (200) 247 (112.0) 8" (200) 273 (123.8) 10" (250) 304 (137.9) 10" (250) 332 (150.6) 12" (300) 360 (163.3) 12" (300) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 167 Revised May-31-2017 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles BPSxxxB - Snap `N ShieldTM for Strut Channel (black) BPSxxxW - Snap `N ShieldTM for Strut Channel (white) Material: Prime grade high-impact copolymer polypropylene Features: � Fast easy installation � snaps onto strut channel: up to 60% quicker than traditional metal shields � Horizontal installation attachment feature to minimize the need to lift the pipe during installation � No tools required for installation � Tight snap-on fit design helps eliminate shield movement which helps prevent insulation damage � Tapered end lip design helps protect insulation from damage that can be caused by sharp edge of traditional saddles � High sidewalls are designed to contain refrigerant liquid lines for efficient system installation � Designed for side-by-side installation to help minimize costs in high density applications � Wide mounting flange to allow for optional self-tapping screws � MSS Standards require 12" (205mm) of surface contact for pipe sizes up to 4" (100mm). All sizes of Snap `N Shield have 12" (305mm) of surface contact � Built-in cable tie grooves � UL Classified for US and Canada � UV resistant � Operating temperature: -40�F (-40C�) to 178� (81C�) � Paintable � Custom textured interior shield surface to allow for thermal expansion of insulated piping Applications: Strut or trapeze mounted horizontal pipe runs for refrigeration, air conditioning and plumbing Certification: � UL Classified for USA UL723 (ASTM E84) Ceiling: FS15 / SD0 Floor: FS150 / SD250 UL Classified for Canada per CAN/ULC-S102.2 FSR 145 / SDC 600 � Material is FDA compliant, RoHS compliant, CA Proposition 65 compliant Color: Black (B) or White (W) Order By: Part number Patent(s) Pending Black Shield Part No. BPS200B BPS300B BPS400B BPS500B BPS600B BPS800B White Shield Part No. BPS200W BPS300W BPS400W BPS500W BPS600W BPS800W Inside Opening in. (mm) 2.35" (60) 3.46" (88) 4.50" (114) 5.52" (140) 6.50" (165) 8.64" (220) Approx. Wt./100 lbs. (kg) 21.5 (9.6) 29.8 (13.5) 38.1 (17.3) 46.4 (21.0) 55.1 (25.0) 75.3 (34.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Revised May-31-2017 168 B-Line series Pipe Hangers & Supports Pipe Supports, Guides, Shields & Saddles BPSxxxB - Snap `N ShieldTM for Strut Channel (black) BPSxxxW - Snap `N ShieldTM for Strut Channel (white) Supports, Guides, Shields & Saddles Sizing Tables for Strut Channel Attachment Sch. 40/80 Pipe Size 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 1/2" BPS200_ BPS200_ BPS200_ BPS200_ BPS200_ BPS300_ BPS300_ BPS300_ BPS400_ BPS400_ BPS500_ BPS500_ BPS800_ BPS800_ Insulation Thickness 3/4" BPS200_ BPS200_ BPS200_ BPS300_ BPS300_ BPS300_ BPS300_ BPS400_ BPS400_ BPS500_ BPS500_ BPS600_ BPS800_ BPS800_ 1" BPS300_ BPS300_ BPS300_ BPS300_ BPS300_ BPS400_ BPS400_ BPS400_ BPS500_ BPS500_ BPS600_ BPS600_ BPS800_ BPS800_ 11/2" BPS400_ BPS400_ BPS400_ BPS400_ BPS400_ BPS500_ BPS500_ BPS500_ BPS600_ BPS600_ BPS800_ BPS800_ BPS800_ -- _ Insert B for Black or W for White 2" BPS500_ BPS500_ BPS500_ BPS500_ BPS500_ BPS600_ BPS600_ BPS600_ BPS800_ BPS800_ BPS800_ BPS800_ --- Copper Tubing Size 1/4" 3/8" 1/2" 5/8" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 1/2" BPS200_ BPS200_ BPS200_ BPS200_ BPS200_ BPS200_ BPS300_ BPS300_ BPS300_ BPS400_ BPS400_ BPS500_ BPS500_ BPS600_ BPS800_ Insulation Thickness 3/4" BPS200_ BPS200_ BPS200_ BPS200_ BPS300_ BPS300_ BPS300_ BPS300_ BPS400_ BPS400_ BPS500_ BPS500_ BPS600_ BPS800_ BPS800_ 1" BPS300_ BPS300_ BPS300_ BPS300_ BPS300_ BPS300_ BPS300_ BPS400_ BPS400_ BPS500_ BPS500_ BPS600_ BPS600_ BPS800_ BPS800_ 11/2" BPS300_ BPS400_ BPS400_ BPS400_ BPS400_ BPS400_ BPS400_ BPS500_ BPS500_ BPS600_ BPS600_ BPS800_ BPS800_ BPS800_ -- _ Insert B for Black or W for White 2" BPS400_ BPS400_ BPS500_ BPS500_ BPS500_ BPS500_ BPS500_ BPS600_ BPS600_ BPS800_ BPS800_ BPS800_ BPS800_ --- All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 169 Revised May-31-2017 Eaton Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles BPCHxxxB - Snap `N ShieldTM for Pipe (Clevis) & Band Hangers (black) BPCHxxxW - Snap `N ShieldTM for Pipe (Clevis) & Band Hangers (white) Material: Prime grade high-impact copolymer polypropylene Features: � Innovative, one-piece snap-on design for fast, easy installation onto clevis and band hangers � No tools required for installation � Helps eliminate shield movement which helps prevent insulation damage � Tapered end lip design helps protect insulation from damage that can be caused by sharp edge of traditional saddles � High sidewalls are designed to contain refrigerant liquid lines for efficient system installation � MSS Standards require 12" (205mm) of surface contact for pipe sizes up to 4" (100mm). All sizes of Snap `N Shield have 12" (305mm) of surface contact � Built-in cable tie grooves � UL Classified for US and Canada � UV resistant � Operating temperature: -40�F (-40C�) to 178� (81C�) � Paintable � Custom textured interior shield surface to allow for thermal expansion of insulated piping Applications: Clevis or band hangers used in horizontal pipe runs for refrigeration, air conditioning and plumbing Certification: � UL Classified for USA UL723 (ASTM E84) Ceiling: FS15 / SD0 Floor: FS150 / SD250 UL Classified for Canada per CAN/ULC-S102.2 FSR 145 / SDC 600 � Material is FDA compliant, RoHS compliant, CA Proposition 65 compliant Color: Black (B) or White (W) Order By: Part number Patent(s) Pending Black Shield Part No. BPCH200B BPCH300B BPCH400B BPCH500B BPCH600B BPCH800B White Shield Part No. BPCH200W BPCH300W BPCH400W BPCH500W BPCH600W BPCH800W Inside Opening in. (mm) 2.35" (60) 3.46" (88) 4.50" (114) 5.52" (140) 6.50" (165) 8.64" (220) Appropriate Hanger Clevis Band B3100-2 B3100-3 B3100-4 B3100-5 B3100-6 B3100-8 Fig. 200-2 Fig. 200-3 Fig. 200-4 Fig. 200-5 Fig. 200-6 Fig. 200-8 Approx. Wt./100 lbs. (kg) 18.3 (8.3) 25.2 (11.4) 31.9 (14.5) 38.4 (17.4) 45.0 (20.4) 59.8 (27.1) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 170 B-Line series Pipe Hangers & Supports Pipe Supports, Guides, Shields & Saddles BPCHxxxB - Snap `N ShieldTM for Pipe (Clevis) & Band Hangers (black) BPCHxxxW - Snap `N ShieldTM for Pipe (Clevis) & Band Hangers (white) Supports, Guides, Shields & Saddles Sizing Tables for Pipe & Band Hanger Attachment Sch. 40/80 Pipe Size 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 1/2" BPCH200_ BPCH200_ BPCH200_ BPCH200_ BPCH200_ BPCH300_ BPCH300_ BPCH300_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH800_ BPCH800_ Insulation Thickness 3/4" BPCH200_ BPCH200_ BPCH200_ BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH600_ BPCH800_ BPCH800_ 1" BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH400_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH600_ BPCH600_ BPCH800_ BPCH800_ 11/2" BPCH400_ BPCH400_ BPCH400_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH500_ BPCH600_ BPCH600_ BPCH800_ BPCH800_ BPCH800_ -- _ Insert B for Black or W for White 2" BPCH500_ BPCH500_ BPCH500_ BPCH500_ BPCH500_ BPCH600_ BPCH600_ BPCH600_ BPCH800_ BPCH800_ BPCH800_ BPCH800_ --- Copper Tubing Size 1/4" 3/8" 1/2" 5/8" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 1/2" BPCH200_ BPCH200_ BPCH200_ BPCH200_ BPCH200_ BPCH200_ BPCH300_ BPCH300_ BPCH300_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH600_ BPCH800_ Insulation Thickness 3/4" BPCH200_ BPCH200_ BPCH200_ BPCH200_ BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH600_ BPCH800_ BPCH800_ 1" BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH300_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH600_ BPCH600_ BPCH800_ BPCH800_ 11/2" BPCH300_ BPCH400_ BPCH400_ BPCH400_ BPCH400_ BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH600_ BPCH600_ BPCH800_ BPCH800_ BPCH800_ -- _ Insert B for Black or W for White 2" BPCH400_ BPCH400_ BPCH500_ BPCH500_ BPCH500_ BPCH500_ BPCH500_ BPCH600_ BPCH600_ BPCH800_ BPCH800_ BPCH800_ BPCH800_ --- All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 171 Eaton Seismic Bracing Seismic Bracing The TOLCOTM seismic bracing solutions, coupled with Eaton B-Line series pipe hangers and strut systems product offering, is the most complete line of bracing components in the industry. The TOLCO brand has a history of over 40 years in seismic bracing of non-structural systems including fire sprinklers, plumbing, mechanical, HVAC and electrical. Our offering includes both rigid and cable bracing systems vibration isolation, and engineering services. Some of the key features of our seismic products include: � Visual verification of proper installation � Universal application � Multi size adaptable � OSHPD OPM Approval (OPM-0052-13) � Underwriters Laboratories Listed � FM Approved TOLCOTM In addition to the products shown in this catalog we also offer engineered solutions for any seismic bracing application. Our team of experts can help you design your seismic bracing layout to ensure it meets applicable building codes and standards. Contact SeismicQuotes@Eaton.com for assistance with your next project. Engineering services include: � BOM assistance � Submittal packages � Engineered design layout � PE stamp in all 50 states and aCanada � TOLBraceTM Software for Fire Sprinkler seismic bracing design Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 172 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 4A - Pipe Clamp for Sway Bracing Size Range: 21/2" (65mm) thru 8" (200mm) pipe. For sizes smaller than 21/2" (65mm) use Fig, 4LA. Material: Steel Function: For bracing pipe against sway and seismic disturbance. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) 21/2" (65mm) thru 8" (200mm). Installation Instructions: Fig. 4A is the "braced pipe" attachment component of a longitudinal, lateral or riser brace assembly. It is intended to be combine with the "bracing pipe" and TOLCO transitional and structural attachment component(s) to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 4A over the pipe to be braced. Attach TOLCO transitional fitting, either Fig. 980, 910 or 909, to the clamp ears. Tighten bolts and nuts; torque requirement is a minimum of 50 ft./lbs. (68Nm). Transitional fitting attachment can pivot for adjustment to proper brace angle. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size and finish Note: Please refer to Fig. 4LA for longitudinal brace applications for 1" (25mm) - 12" (300mm) pipe sizes. Seismic Bracing B A D C Hardware Included Seismic Bracing For Laterial Brace Refer to 4LA Fig. 980 Fig. 980 Longitudinal Brace Fig. 4A Part No. 4A-21/2 4A-3 4A-4 4A-5 4A-6 4A-8 Pipe Size in. (mm) 21/2" (100) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 7" (177.8) 71/2" (190.5) 81/2" (215.9) 93/4" (247.6) 111/2" (292.1) 131/4"(336.5) C in. (mm) 211/16" (68.3) 3" (76.2) 33/8" (85.7) 37/8" (98.4) 5" (127.0) 611/16" (169.9) D in. (mm) 3" (76.2) 35/16" (84.1) 311/16" (93.7) 43/8" (111.1) 51/8" (130.2) 61/8" (155.6) Bolt Size 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 Max. Horizontal Design Load (UL) lbs. (kN) 1000 (4.45) 1000 (4.45) 1600 (7.11) 1600 (7.11) 2015 (8.96) 2015 (8.96) Approx. Wt./100 lbs. (kg) 134 (60.8) 150 (69.0) 221 (100.2) 253 (114.7) 513 (232.7) 601 (272.6) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 173 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 4L - Longitudinal In-Line Sway Brace Attachment (UL Listed) Size Range: 2" (50mm) through 8" (200mm) IPS. Material: Steel OPM Function: For bracing pipe against sway and seismic disturbance. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) 21/2" (65mm) through 8" (200mm) pipe. Set Bolt & Hardware Included For FM Approval information refer to FM Approved page 175. Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD A projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Installation Instructions: Fig. 4L is the "braced pipe" attachment component of a longitudinal sway brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO structural attachment D component to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 4L over the pipe to be braced and tighten bolts. Then engage "bracing pipe" into jaw opening and tighten set bolt until head snaps off. Jaw attachment can pivot for adjustment to proper C brace angle. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size and finish. Brace Fig. 980 Fig. 4L Longitudinal Brace Part No. 4L-2 4L-21/2 4L-3 4L-4 4L-5 4L-6 4L-8 Pipe Size in. (mm) 2" (50) 21/2" (65) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 53/8" (136.5) 67/16" (163.5) 7" (177.8) 81/2" (215.9) 93/4" (247.6) 111/2" (292.1) 131/4" (336.5) C in. (mm) 21/16" (52.4) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 37/8" (98.4) 5" (127.0) 55/8" (142.8) D in. (mm) 21/16" (52.4) 23/4" (69.8) 31/16" (77.8) 311/16" (93.7) 43/8" (111.1) 51/8" (130.2) 55/8" (142.9) Bolt Size 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 Max. Rec. Load (cULus) lbs. (kN) 2015 (8.96) 2015 (8.96) 2015 (8.96) 2015 (8.96) 2015 (8.96) 2015 (8.96) 2015 (8.96) Approx. Wt./100 lbs. (kg) 243 (110.2) 253 (114.7) 268 (121.5) 348 (157.8) 380 (172.3) 640 (290.3) 728 (330.2) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 174 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 4L - Longitudinal In-Line Sway Brace Attachment (FM Approved) Size Range: 21/2" (65mm) through 8" (200mm) IPS. OPM Material: Steel Function: For bracing pipe against sway and seismic disturbance. Set Bolt & Hardware Approvals: Approved by Factory Mutual Engineering (FM), 21/2" (65mm) Included through 8" (200mm) pipe. For UL Listed information refer to UL Listed page 174. Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). A For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Installation Instructions: Fig. 4L is the "braced pipe" attachment component of a longitudinal sway brace assembly. It is intended to be D combined with the "bracing pipe" and TOLCO structural attachment component to form a complete bracing assembly. NFPA 13 and/or FM guidelines should be followed. To Install: Place the Fig. 4L over the pipe to be braced and tighten bolts. Then engage "bracing pipe" into jaw opening and tighten set bolt C until head snaps off. Jaw attachment can pivot for adjustment to proper brace angle. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size and finish. Designed to meet or exceed requirements of FM DS 2-8. Brace Fig. 980 Fig. 4L Longitudinal Brace Part No. 4L-21/2 4L-3 4L-4 4L-5 4L-6 4L-8 Pipe Size in. (mm) 21/2" (65) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) A in. (mm) 67/16" (163.5) 7" (177.8) 81/2" (215.9) 93/4" (247.6) 111/2" (292.1) 131/4" (336.5) C in. (mm) 21/2" (63.5) 23/4" (69.8) 33/8" (85.7) 37/8" (98.4) 5" (127.0) 55/8" (142.8) D in. (mm) 23/4" (69.8) 31/16" (77.8) 311/16" (93.7) 43/8" (111.1) 51/8" (130.2) 55/8" (142.9) Bolt Size 30�-44� lbs. (kN) Max. Rec. Load (FM) 45�-59� 60�-74� lbs. (kN) lbs. (kN) 75�-90� lbs. (kN) 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1030 (4.58) 1030 (4.58) 530 (2.36) 530 (2.36) 530 (2.36) 490 (2.18) 1180 (5.24) 1180 (5.24) 730 (3.25) 730 (3.25) 730 (3.25) 680 (3.02) 1420 (6.31) 1590 (7.07) 1420 (6.31) 1590 (7.07) 890 (3.96) 990 (4.40) 890 (3.96) 990 (4.40) 890 (3.96) 990 (4.40) 830 (3.69) 930 (4.13) FM Approved when used with 1", 11/4", 11/2" or 2" Sch. 40 brace pipe. FM Approved design loads are based on ASD design method. * UL Listed not FM Approved. Approx. Wt./100 lbs. (kg) 253 (114.7) 268 (121.5) 348 (157.8) 380 (172.3) 640 (290.3) 728 (330.2) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 175 Eaton Seismic Bracing TOLCOTM Fig. 4LA - In-Line Sway Brace Attachment (UL Listed) Size Range: 1" (25mm) through 8" (200mm) IPS. Material: Steel OPM Function: For bracing pipe against sway and seismic disturbance. Approvals: For FM Approval information refer to FM Approved page 177. Underwriters Laboratories Listed in the USA and Canada (cULus). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. D Installation Instructions: Fig. 4LA can be used as the system attachment A component of a longitudinal or lateral brace assembly. It is intended to be combined with the "bracing member" and TOLCO transitional attachment C and structural attachment to form a complete bracing assembly. For fire sprinkler applications NFPA 13 guidelines should be followed. To Install: Place the Fig. 4LA pipe clamp component over the pipe to be 4LA-1 thru 4LA-4 braced and tighten down the break-off nuts until the hex head portion breaks off to verify correct installation torque. Next engage brace member (pipe or strut) with jaw component and tighten break-off head bolt until the hex head breaks off to verify correct installation torque. Pivot jaw for correct angle and attach to structure using TOLCO brand transitional attachment and structural attachment. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size and finish. D A Seismic Bracing Longitudinal Brace Brace Fig. 980 Fig. 4LA Brace Fig. 980 Fig. 4LA Lateral Brace C 4LA-6 thru 4LA-12 Pipe UL Max. Rec. Load Approx. Part Size A C D Bolt Size Longitudinal Lateral Wt./100 No. in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kN) lbs. (kg) 4LA-1 4LA-11/4 4LA-11/2 4LA-2 4LA-21/2 4LA-3 4LA-31/2 4LA-4 4LA-6 4LA-8 4LA-10* 4LA-12* 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) 319/32" (91.2) 329/32" (99.3) 45/32" (105.7) 511/32" (135.6) 527/32" (148.7) 61/2" (164.9) 7.407" (188.1) 713/32" (190.8) 105/8" (269.9) 1213/16" (325.5) 161/2" (419.1) 181/2" (469.9) 15/16" (33.5) 13/8" (35.3) 11/2" (38.5) 21/32" (51.9) 25/16" (58.5) 25/8" (66.6) 27/8" (73.1) 31/8" (79.5) 49/16" (115.9) 59/16" (143.7) 71/4" (184.2) 81/4" (209.6) 15/16" (33.5) 13/8" (35.3) 11/2" (38.5) 21/16" (51.9) 25/16" (58.5) 25/8" (66.6) 27/8" (73.1) 31/8" (79.5) 49/16" (115.9) 521/32" (143.7) 71/4" (184.2) 81/4" (209.6) 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1600 (7.12) 2015 (7.12) NA (NA) NA (NA) NA (NA) NA (NA) NA (NA) NA (NA) NA (NA) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1600 (7.12) 2015 (7.12) NA (NA) NA (NA) 119 (54.0) 123 (55.8) 127 (57.6) 142 (64.4) 173 (78.5) 187 (84.8) 198 (89.8) 209 (94.8) 521 (236.3) 629 (285.3) 1320 (598.7) 1496 (678.6) * FM Approved but not UL Listed. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 176 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 4LA - In-Line Sway Brace Attachment (FM Approved) Size Range: 1" (25mm) through 12" (300mm) IPS. Material: Steel Function: For bracing pipe against sway and seismic disturbance. Approvals: Approved by Factory Mutual Engineering (FM), 1" (25mm) through 12" (300mm) pipe. For UL Listed information refer to UL Listed page 176. Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. OPM D C Installation Instructions: Fig. 4LA can be used as the system attachment component of a longitudinal or lateral brace assembly. It is intended to be combined with the "bracing member" and TOLCO transitional attachment and structural attachment to form a complete bracing assembly. For fire sprinkler applications NFPA 13 guidelines should be followed. To Install: Place the Fig. 4LA pipe clamp component over the pipe to be braced and tighten down the break-off nuts until the hex head portion breaks off to verify correct installation torque. Next engage brace member (pipe or strut) with jaw component and tighten break-off head bolt until the hex head breaks off to verify correct installation torque. Pivot jaw for correct angle and attach to structure using TOLCO brand transitional attachment and structural attachment. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size and finish. 4LA-1 thru 4LA-4 D C 4LA-6 thru 4LA-12 A A Pipe FM Max. Rec. Load Approx. Longitudinal & Lateral** Part Size A C D Bolt Size 30�-44� 45�-59� 60�-74� 75�-90� Wt./100 No. in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kg) 4LA-1 4LA-11/4 4LA-11/2 4LA-2 4LA-21/2 4LA-3 4LA-31/2 4LA-4 4LA-6 4LA-8 4LA-10 4LA-12 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) 319/32" (91.2) 329/32" (99.3) 45/32" (105.7) 511/32" (135.6) 527/32" (148.7) 61/2" (164.9) 7.407" (188.1) 713/32" (190.8) 105/8" (269.9) 1213/16" (325.5) 161/2" (419.1) 181/2" (469.9) 15/16" (33.5) 13/8" (35.3) 11/2" (38.5) 21/32" (51.9) 25/16" (58.5) 25/8" (66.6) 27/8" (73.1) 31/8" (79.5) 49/16" (115.9) 59/16" (143.7) 71/4" (184.2) 81/4" (209.6) 15/16" (33.5) 13/8" (35.3) 11/2" (38.5) 21/16" (51.9) 25/16" (58.5) 25/8" (66.6) 27/8" (73.1) 31/8" (79.5) 49/16" (115.9) 521/32" (143.7) 71/4" (184.2) 81/4" (209.6) 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 680 (3.02) 680 (3.02) 680 (3.02) 680 (3.02) 680 (3.02) 680 (3.02) 680 (3.02) 680 (3.02) 1620 (7.20) 1620 (7.20) 1620 (7.20) 1620 (7.20) 970 (4.31) 970 (4.31) 970 (4.31) 970 (4.31) 970 (4.31) 970 (4.31) 970 (4.31) 970 (4.31) Note 1 Note 2 Note 2 Note 2 1190 (5.29) 1190 (5.29) 1190 (5.29) 1190 (5.29) 1190 (5.29) 1190 (5.29) 1190 (5.29) 1190 (5.29) Note 3 Note 4 Note 4 Note 4 1320 (5.87) 1320 (5.87) 1320 (5.87) 1320 (5.87) 1320 (5.87) 1320 (5.87) 1320 (5.87) 1320 (5.87) Note 5 Note 6 Note 6 Note 6 119 (54.0) 123 (55.8) 127 (57.6) 142 (64.4) 173 (78.5) 187 (84.8) 198 (89.8) 209 (94.8) 521 (236.3) 629 (285.3) 1320 (598.7) 1496 (678.6) ** Longitudinal and Lateral Loads are the same except where noted in chart. Note 1: Longitudinal Load 2260 lbs. (10.05kN) - Lateral Load 2300 lbs. (10.23kN) Note 2: Longitudinal Load 1660 lbs. (7.38kN) - Lateral Load 2300 lbs. (10.23kN) Note 3: Longitudinal Load 2010 lbs. (8.94kN) - Lateral Load 2820 lbs. (12.54kN) Note 4: Longitudinal Load 1570 lbs. (6.98kN) - Lateral Load 2820 lbs. (12.54kN) Note 5: Longitudinal Load 2220 lbs. (9.87kN) - Lateral Load 3140 lbs. (13.96kN) Brace Longitudinal Brace Fig. 980 Fig. 4LA Brace Fig. 980 Fig. 4LA Note 6: Longitudinal Load 1740 lbs. (7.74kN) - Lateral Load 3140 lbs. (13.96kN) Lateral Brace Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 177 Eaton Seismic Bracing TOLCOTM Figure 4B Pipe Clamp for Sway Bracing Size Range: 3/4" (20mm) to 8" (200mm) pipe Material: Steel Function: For bracing pipe against sway and seismic disturbance Approvals: Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Standard Finish: Plain or Electro-Plated, Contact customer service for alternative finishes and materials. Ordering: Specify part number and finish. Installation Instructions: Fig. 4B is the "braced pipe" attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and transitional and structural attachment component(s) to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be followed. To Install: Place the Fig. 4B over the pipe to be braced. Attach other transitional fitting, Fig. 909, 910, or 980. Tighten bolts and nuts. Transitional fitting attachment can pivot for adjustment to proper brace angle. Component of State of California OSHPD Approved Seismic Restraints System C A B D Fig. 980 Seismic Bracing Brace Pipe Fig. 980 Fig. 4B Hanger/Longitudinal Brace Part No. 4B-3/4 4B-1 4B-11/4 4B-11/2 4B-2 4B-21/2 4B-3 4B-31/2 4B-4 4B-5 4B-6 4B-8 Pipe Size in. (mm) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Rod Size A 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 7/8"-9 B in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 11/2" (38.1) 13/4" (44.4) 17/8" (47.6) 2" (50.8) 2" (50.8) 2" (50.8) 21/8" (54.0) 21/8" (54.0) C in. (mm) 27/8" (73.0) 31/4" (82.5) 39/16" (90.6) 313/16" (96.8) 51/8" (130.2) 55/8" (142.9) 63/4" (171.4) 71/4" (184.1) 85/8" (219.1) 97/8" (250.8) 1015/16" (277.8) 137/16" (341.2) D in. (mm) 25/8" (66.7) 215/16" (74.6) 31/4" (82.5) 37/16" (87.3) 45/8" (117.5) 53/8" (136.5) 61/8" (155.5) 63/4" (171.4) 71/4" (184.1) 85/16" (211.1) 91/2" (241.3) 111/2" (292.1) Bolt Size 5/16"-18 5/16"-18 5/16"-18 5/16"-18 5/16"-18 3/8"-16 3/8"-16 3/8"-16 1/2"-13 5/8"-11 5/8"-11 3/4"-10 Design Load Lbs. (kN) 330 (1.47) 330 (1.47) 330 (1.47) 330 (1.47) 440 (1.78) 440 (1.78) 660 (2.93) 660 (2.93) 800 (3.56) 980 (4.36) 980 (4.36) 1200 (5.34) Approx. Wt./100 Lbs. (kg) 56 (25.4) 60 (27.2) 74 (33.5) 79 (35.8) 156 (70.7) 176 (79.8) 198 (89.9) 219 (99.3) 288 (130.6) 390 (176.9) 448 (203.2) 691 (313.4) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 178 B-Line series Pipe Hangers & Supports Seismic Bracing TOLCOTM Fig. 906 - Sway Brace Multi-Fastener Adapter Material: Steel Application: Allows sway brace fittings to develop greater load carrying ability by providing multiple fastener attachments for steel and wood. The National Fire Protection (NFPA) provides information on fastener loads to various structures. Refer to NFPA 13 (2016) 9.3.5.9.1. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) only when used with TOLCO Fig. 900 Series Earthquake Brace Attachments. Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Installation Instructions: Fig. 906 is a multiple fastener structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Attach the Fig. 906 to the structural surface as per fastener design guidelines. Attach other TOLCO transitional attachment fitting, Fig. 980, 910, 909, or any other TOLCO approved transitional fitting. Transitional fitting attachment can pivot for adjustment to proper brace angle. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number and specify dimensions H1 and H2. H1 D C C Seismic Bracing OPM H1 B H2 A Mounting Hardware Is Not Included Part Number 906 A in. (mm) 12" (305.0) B in. (mm) 9" (228.6) C in. (mm) 2" (50.8) D in. (mm) 1/4" (6.3) H1 Specify H2 Specify Approx. Wt./100 Lbs. (kg) 307 (139.3) Load Note: Actual design load determined by anchor and concrete strength, not to exceed the UL Listed maximum horizontal load of 2015 lbs. (8.96kN). Load is for Fig. 906. If combined load of anchors is less, must reduce to anchor maximum capacity. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 179 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 800 - Adjustable Sway Brace Attachment to Steel (UL Listed) Size Range: 4" (101.6mm) thru 18" (457.2mm) beam width Material: Steel Function: Seismic brace attachment to steel. Features: This product's design incorporates a concentric attachment point which is critical to the performance of structural seismic connections. NFPA 13 indicates the importance of concentric loading of connections and fasteners. Permits secure connection to steel where drilling and/or welding of brace connection could present structural issues. Installation Instructions: Fig. 800 is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 800 on the steel beam, tighten the cone point set bolts on flange until the heads break off. Tighten hex head bolts into clamp body until lock washers are fully flat. Attach other TOLCO transitional attachment fitting, Fig. 980, 910, 909, or any other TOLCO approved transitional fitting. Transitional fitting attachment can pivot for adjustment to proper brace angle. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For FM Approval information refer to FM Approved page 181. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, type number and size number. Example: FIG. 800 TYPE2X14-16 OPM Set Bolts & Hardware Included Type 800 TYPE1 800 TYPE2 Fits Beam Flange Thickness in. (mm) Up to 3/4" (Up to 19.0) 3/4" to 11/4" (19.0 to 31.7) Fits Flange Width Range in. (mm) 4-6 4"-6" (101.6-152.4) 6-8 6"-8" (152.4-203.2) 8-10 8"-10" (203.2-254.0) 10-12 10"-12" (254.0-304.8) 12-14 12"-14" (304.8-355.6) 14-16 14"-16" (355.6-406.4) 16-18 16"-18" (406.4-457.2) Max.Design Loads (cULus) Along Beam Across Beam lbs. (kN) lbs. (kN) 1265 (5.62) 1265 (5.62) 2015 (8.96) 2015 (8.96) Shown with Fig. 980 brace fitting to pipe brace (Across Beam) Shown with Fig. 980 brace fitting to pipe brace (Along Beam) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 180 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 800 - Adjustable Sway Brace Attachment to Steel (FM Approved) Size Range: 4" (101.6mm) thru 18" (457.2mm) beam width Material: Steel Function: Seismic brace attachment to steel. Features: This product's design incorporates a concentric attachment point which is critical to the performance of structural seismic connections. NFPA 13 indicates the importance of concentric loading of connections and fasteners. Permits secure connection to steel where drilling and/or welding of brace connection could present structural issues. Installation Instructions: Fig. 800 is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 800 on the steel beam, tighten the cone point set bolts on flange until the heads break off. Tighten hex head bolts into clamp body until lock washers are fully flat. Attach other TOLCO transitional attachment fitting, Fig. 980, 910, 909, or any other TOLCO approved transitional fitting. Transitional fitting attachment can pivot for adjustment to proper brace angle. Approvals: Approved by Factory Mutual Engineering (FM). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For UL Listed information refer to UL Listed page 180. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, type number and size number. Example: FIG. 800 TYPE2X14-16 Designed to meet or exceed requirements of FM DS 2-8. OPM Set Bolts & Hardware Included Type 800 TYPE1 800 TYPE2 Fits Beam Flange Thickness in. (mm) Up to 3/4" (Up to 19.0) 3/4" to 11/4"(19.0 to 31.7) Max.Design Loads (FM)* Laterial - Parallel to Structural Member Longitudinal - Perpendicular to Structural Member 30�-44� 45�-59� 60�-74� 75�-90� 30�-44� 45�-59� 60�-74� 75�-90� lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) 1430 1970 1980 NR 930 1310 1610 1800 (6.36) (8.76) (8.81) (NR) (4.13) (5.82) (7.16) (8.00) NR NR NR NR NR NR NR NR (NR) (NR) (NR) (NR) (NR) (NR) (NR) (NR) Shown with Fig. 980 brace fitting to pipe brace (Along Beam) Fits Flange Width Range in. (mm) 4-6 4"-6" (101.6-152.4) 6-8 6"-8" (152.4-203.2) 8-10 8"-10" (203.2-254.0) 10-12 10"-12" (254.0-304.8) 12-14 12"-14" (304.8-355.6) 14-16 14"-16" (355.6-406.4) 16-18 16"-18" (406.4-457.2) * The loads listed are axial loads on the brace. The horizontal load capacity, H, of the brace is: H = F x sin ?, where ? is the installation angle measured from the vertical. FM Approved design loads are based on ASD design method. Shown with Fig. 980 brace fitting to pipe brace (Across Beam) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 181 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 828 - Universal Sway Brace Attachment to Steel (UL Listed) Size Range: One size accommodates all Fig. 900 Series sway brace attachments. Fits from 3/8" (9.4mm) to 7/8" (22.2mm) thick steel structure. For thicknesses less than 3/8" (9.4mm) refer to Fig. 825 and Fig. 825A. Material: Steel Function: To attach sway bracing and/ot hangers to various types of steel structural members. Features: Permits secure non-friction connection without drilling or welding. Unique design allows offset placement on wide flange beam, I-beam, C-channel, open web, welded steel trusses, etc.. Secures brace to structure either across or along the beam. Break-off set bolts allow for visual verification of proper installation torque. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For FM Approval information refer to FM Approved page 183. Installation Instructions: The Fig. 828 is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 828 on the flange of the beam, truss, or girder. Be sure the attachment is fully engaged to the rear of the opening. Tighten the cone point set bolts (A) until the heads break off. Tighten the cone point set bolt (B) until the head breaks off. Remove the flange nut from set bolt (B). Install a TOLCO swivel fitting (Fig. 980, 910, 909, or any other TOLCO approved transitional fitting). Use flange nut to secure the swivel fitting*. Finish: Plain or Electro-Galvanized Approx. Weight/100: 275 Lbs. (124.7kg) Order By: Figure number and finish Patent #6,098,942, #8,534,625 Canada Patent #2,286,659 * Retaining strap not required. OPM Cone Point Set Bolts A Set Bolts Included Cone Point Set Bolt B UL Horizontal Design Load Maximum Design Load Across Beam 2015 lbs. (8.96kN) Maximum Design Load Along Beam 2015 lbs. (8.96kN) Fig. 828 Shown with Fig. 980 May pivot in any direction Fig. 828 Shown with Fig. 980 Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 182 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 828 - Universal Sway Brace Attachment to Steel (FM Approved) Size Range: One size accommodates all Fig. 900 Series sway brace attachments. Fits from 3/8" (9.4mm) to 7/8" (22.2mm) thick steel structure. For thicknesses less than 3/8" (9.4mm) refer to Fig. 825. Material: Steel Function: To attach sway bracing and/or hangers to various types of steel structural members. Features: Permits secure non-friction connection without drilling or welding. Unique design allows offset placement on wide flange beam, I-beam, C-channel, open web, welded steel trusses, etc.. Secures brace to structure either across or along the beam. Break-off set bolts allow for visual verification of proper installation torque. Approvals: Factory Mutual Approved (FM). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For UL Listed information refer to UL Listed page 182. Installation Instructions: The Fig. 828 is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 or FM guidelines should be followed. To Install: Place the Fig. 828 on the flange of the beam, truss, or girder. Be sure the attachment is fully engaged to the rear of the opening. Tighten the cone point set bolts (A) until the heads break off. Tighten the cone point set bolt (B) until the head breaks off. Remove the flange nut from set bolt (B). Install a TOLCO swivel fitting Fig. 980 or any other TOLCO approved transitional fitting). Use flange nut to secure the swivel fitting*. Finish: Plain or Electro-Galvanized Approx. Weight/100: 275 Lbs. (124.7kg) Order By: Figure number and finish Patent #6,098,942, #8,534,625 Canada Patent #2,286,659 Designed to meet or exceed requirements of FM DS 2-8. * Retaining strap not required. OPM Cone Point Set Bolts A Set Bolts Included Cone Point Set Bolt B FM Approved Allowable Horizontal Load* With Brace Perpendicular To Beam Brace Angle (degrees from vertical) 30�-44� 45�-59� 60�-74� 75�-90� 1570 (6.98kN) 2220 (9.87kN) 1210 (5.38kN) 700 (3.11kN) FM Approved Allowable Horizontal Load* With Brace Parallel To Beam Brace Angle (degrees from vertical) 30�-44� 45�-59� 60�-74� 75�-90� 690 (3.07kN) 970 (4.31kN) 1210 (5.38kN) 1330 (5.91kN) FM Approved design loads are based on ASD design method. Fig. 828 Shown with Fig. 980 May pivot in any direction Fig. 828 Shown with Fig. 980 Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 183 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 825 - Bar Joist Sway Brace Attachment To Steel (UL Listed) Size Range: One size accommodates all Fig. 900 Series sway brace attachments. Maximum Horizontal Design Load 2015 lbs (8.96kN). OPM Material: Steel Function: To attach sway bracing and hanger assemblies to steel members. Features: This product's design incorporates a concentric 3/8" (9.5) attachment point which is critical to the performance of structural seismic connections. NFPA 13 indicates the importance of concentric loading of connections and fasteners. Permits secure non-friction connection without drilling or welding. Unique design reinforces point of connection to joist. Break off head set bolt design assures verification of proper installation torque (min. 31 ft.-lbs.). Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For FM Approval information refer to FM Approved page 185. Set Bolts & Hardware Included Installation Instructions: Fig. 825 is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment, to form a complete bracing assembly. NFPA 13 guidelines should be followed. Maximum Design Load 2015 lbs. (8.96kN) UL Listed as Hanger Attachment for 6" (150mm) Pipe at Maximum Spacing To Install: Place the Fig. 825 on the steel beam, tighten the cone point set bolts until heads break off. Attach other TOLCO transitional attachment fitting, Fig. 980, 910, 909, or any other TOLCO approved transitional fitting. Transitional fitting attachment can pivot for adjustment to Fig. 825 proper brace angle. Fig. 980 Finish: Plain, Electro-Galvanized and HDG Approx. Wt./100: 247.5 Lbs. (112.2kg) Order By: Figure number and finish US Patent #6,098,942, Canada Patent #2,286,659 * Retaining strap not required. Fig. 4L 1" (25.4mm) 1/2" Bolt & Nut Furnished Top View I-Beam Fig. 825 Fig. 980 Fig. 825 Fig. 980 Bar joist shown attached to various roof materials Shown with Fig. 910 Brace Fig. 1001 May pivot in any direction Fig. 1001 Front View Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 184 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 825 - Bar Joist Sway Brace Attachment To Steel (FM Approved) Size Range: One size accommodates all Fig. 900 Series sway brace attachments. OPM Material: Steel Function: To attach sway bracing and hanger assemblies 3/8" to steel members. (9.5) Features: This product's design incorporates a concentric attachment point which is critical to the performance of structural seismic connections. NFPA 13 indicates the importance of concentric loading of connections and fasteners. Permits secure non-friction connection without drilling or welding. Unique design reinforces point of connection to joist. Break off head set bolt design assures verification of proper installation torque (min. 31 ft.-lbs.). Set Bolts & Hardware Included Approvals: Approved by Factory Mutual Engineering (FM). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For UL Listed information refer to UL Listed page 184. Top View Installation Instructions: Fig. 825 is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment, to form a complete bracing assembly. NFPA 13 or FM guidelines should be followed. 1" (25.4mm) Fig. 825 1/2" Bolt & Nut Furnished To Install: Place the Fig. 825 on the steel beam, tighten the cone point set bolts until heads break off. Attach other TOLCO transitional attachment fitting, Fig. 980, 910, 909, or any other TOLCO approved transitional fitting. Transitional fitting attachment can pivot for adjustment to proper brace angle. Fig. 980 Finish: Plain, Electro-Galvanized and HDG Approx. Wt./100: 247.5 Lbs. (112.2kg) Fig. 825 Order By: Figure number and finish US Patent #6,098,942, Canada Patent #2,286,659 Fig. 980 Fig. 1001 Side View Fig. 825 Designed to meet or exceed requirements of FM DS 2-8. * Retaining strap not required. Fig. 4L Fig. 980 FM Approved design loads are based on ASD design method. Maximum 3/8" Thick Flange Maximum 3/8" Thick Flange Perpendicular to Structural Member Parallel to Structural Member FM Approved Design Loads 30�-44� 45�-59� 60�-74� 75�-90� lbs. / (kN) lbs. / (kN) lbs. / (kN) lbs. / (kN) 990 1360 1670 1860 (4.40) (6.05) (7.43) (8.27) 460 630 770 860 (2.04) (2.80) (3.42) (3.82) Fig. 1001 I-Beam Fig. 825 Fig. 980 Brace Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 185 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 825A - Bar Joist Sway Brace Attachment To Steel Size Range: One size accommodates all Fig. 900 Series sway brace attachments. Material: Steel Function: To attach sway bracing and/or hanger to steel structural members. Features: This product's design incorporates a concentric attachment point which is critical to the performance of structural seismic connections. NFPA 13 indicates the importance of concentric loading of connections and fasteners. Permits secure non-friction connection without drilling or welding. Unique design reinforces point of connection to joist. Break off head bolt design assures verification of proper installation. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Installation Instructions: Fig. 825A is the structural attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with a TOLCO transitional attachment, "bracing pipe" and a TOLCO "braced pipe" attachment to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 825A on the steel beam, tighten the cone point set bolts until heads break off. Attach other TOLCO transitional attachment fitting, Fig. 980, 910, 909, or any other TOLCO approved transitional fitting. Transitional fitting attachment can pivot for adjustment to proper brace angle. Finish: Plain or Electro-Galvanized Approx. Wt./100: 154.5 Lbs. (70.1kg) Order By: Figure number and finish Patent #6,098,942 * Retaining strap not required. OPM Set Bolts & Hardware Included 3/8" (9.5) Maximum Design Load 1600 lbs. (7.11kN) UL Listed as a hanger up to 8" (7.11kN). Bar joist shown attached to various roof materials May pivot in any direction Shown with Fig. 910 Shown with Fig. 1001 Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 186 B-Line series Pipe Hangers & Supports Seismic Bracing TOLCOTM Fig. 909 - No-Thread Swivel Sway Brace Attachment (UL Listed) Size Range: 1" (25mm) bracing pipe. For brace pipe sizes larger than 1" (25mm), use Fig. 980. Available with holes for 1/2", 5/8", or 3/4" fastener attachment. Material: Steel, hardened cone point set bolt Function: The structural component of a sway and seismic bracing system. Features: This product's design incorporates a concentric attachment opening which is critical to the performance of structural seismic connections. NFPA 13 indicates clearly that fastener table load values are based only on concentric loading. No threading of the bracing pipe is required. Open design allows for easy inspection of pipe engagement. Application Note: Fig. 909 is used in conjunction with the Fig. 1000, Fig. 1001, Fig. 4A or Fig. 4L or other approved TOLCO attachment to pipe, and joined together with bracing pipe. Sway brace assemblies are intended to be installed in accordance with NFPA 13. The required type, number and size of fasteners used for the structure attachment fitting shall be in accordance with NFPA 13. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Installation Instructions: Fig. 909 is the structural or transitional attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001, 2002, 3000, 4A, 4LA or other approved TOLCO attachment to pipe to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Place the Fig. 909 onto the bracing pipe. Tighten the set bolt until the head bottoms out on surface. Attachment can pivot for adjustment to proper brace angle. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, fastener attachment size and finish. Set Bolt Included Seismic Bracing OPM D B Mounting Hardware Is Not Included Part Number Mounting Hole D in. (mm) 909-1/2 * 909-5/8 909-3/4 17/32" (13.5) 11/16" (17.5) 13/16" (20.6) * Standard size. Brace Pipe Size in. (mm) 1" (25) 1" (25) 1" (25) B in. (mm) 15/8" (41.3) 15/8" (41.3) 15/8" (41.3) Max. Design Load lbs. (kN) 2015 (8.96) 2015 (8.96) 2015 (8.96) Approx. Wt./100 lbs. (kg) 91 (41.3) 90 (40.8) 89 (40.4) Important! - For load information when using Fig. 909 with pre-installed or post-installed concrete anchors in compliance with NFPA 13 (2016) or ASCE 7-10, including prying factors, see page 316. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 187 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 910 - Threaded Swivel Sway Brace Attachment (UL Listed) Size Range: 1" (25mm) bracing pipe. For brace pipe sizes larger than 1" (25mm), use Fig. 980. Available with holes for 1/2", 5/8", or 3/4" fastener attachment. Material: Steel Function: For bracing pipe against sway and seismic disturbances. The building attachment component of a sway brace system; the Fig. 910 is used in conjunction with the Fig. 1001, Fig. 1000 or with a Fig. 4A, Fig. 4L, or Fig. 4LA pipe clamp and joined together with a brace pipe per NFPA 13. Features: This product's design incorporates a concentric attachment opening which is critical to the performance of structural seismic connections. NFPA 13 (2010) 9.3.5.8.4 and (2013-2016) 9.3.5.11.5 indicates that fastener table load values are based only on concentric loading. Universal swivel design allows Fig. 910 to be attached at any surface angle. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. Installation Instructions: Fig. 910 is a structural or transitional attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with the "bracing pipe", and TOLCO "braced pipe" attachment, Fig. 1000, Fig. 1001, Fig. 4A, Fig. 4L or Fig. 4LA to form a complete bracing assembly. Follow NFPA 13 and/or OSHPD guidelines. To Install: Thread the pipe into the Fig. 910 until pipe threads are visible through inspection site hole. Attachment can pivot for adjustment to proper brace angle. Note: Fig. 910 swivel attachment and Fig. 1001, 1000, 2002, 3000, 4A, 4L, or 4LA pipe clamps make up a sway brace system of (UL) Listed attachments and bracing materials which satisfies the requirements of Underwriters Laboratories and the National Fire Protection Association (NFPA). Finish: Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size, fastener attachment size, and finish. OPM D A B E C F Mounting Hardware Is Not Included Fig. 1001 Fig. 910 Brace Pipe Part Number 910-1 X 1/2 910-1 X 5/8 910-1 X 3/4 Brace Pipe Size in. (mm) 1" (25) 1" (25) 1" (25) A in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) B in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) C in. (mm) 3" (76.2) 3" (76.2) 3" (76.2) Mounting Hole D in. (mm) E in. (mm) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 25/16" (58.7) 25/16" (58.7) 25/16" (58.7) Lateral Brace Max. Design F Load in. (mm) lbs. (kN) 2" (50.8) 2" (50.8) 2" (50.8) 1600 (8.96) 1600 (8.96) 1600 (8.96) Approx. Wt./100 lbs. (kg) 88 (39.9) 87 (39.4) 86 (39.0) Important! - For load information when using Fig. 910 with pre-installed or post-installed concrete anchors in compliance with NFPA 13 (2016) or ASCE 7-10, including prying factors, see page 316. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 188 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 907 - Multi-Angle Attachment Size Range: 1" (25.4mm) x 1" (25.4mm), 1" (25.4mm) x 11/4" (31.7mm) and 11/4" (25.4mm) x 11/4" (25.4mm) bracing pipe. Material: Steel, hardened cone (or cup) point set bolt Function: For attaching two pieces of pipe together at various angles. To Install: Attach the Fig. 907 over one piece of pipe and adjust to desired position. Tighten set bolt until head bottoms out on surface, then repeat the process for the second pipe. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, bracing pipe sizes and finish. Seismic Bracing A B Set Bolts Included Seismic Bracing Part Number 907-1 X 1 907-1 X 11/4 907-11/4 X 11/4 Brace Pipe Size in. (mm) 1" x 1" (25 x 25) 1" x 11/4" (25 x 32) 11/4" x 11/4" (32 x 32) A in. (mm) 43/4" (120.6) 53/16" (128.6) 53/8" (136.5) B in. (mm) 43/4" (120.6) 413/16" (122.2) 51/4" (133.1) Max. Design Load Approx. Wt./100 lbs. (kN) lbs. (kg) 655 (2.91) 655 (2.91) 655 (2.91) 103 (46.7) 107 (48.5) 109 (49.4) Shown With Fig. 909 Shown With Fig. 909 Brace Pipe Fig. 1000 Fig. 907 Can Be Attached On Either Side Of The Pipe Being Braced Fig. 909 Fig. 907 4-Way Riser Brace Fig. 1000 Shown With Fig. 909 Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 189 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 975 - Straight Sway Brace Fitting (UL Listed) Size Range: 1" (25mm) bracing pipe. For brace pipe sizes larger than 1" (25mm), use Fig. 980. Available with holes for 1/2", 5/8", or 3/4" fastener attachment. Material: Steel Function: For bracing pipe against sway and seismic disturbances. The building attachment component of a sway brace system; the Fig. 975 is used in conjunction with the Fig. 1000, Fig. 1001 or with any approved TOLCO seismic bracing attachment to pipe and joined together with a brace pipe per NFPA 13. Features: Open design allows for easy checking of thread engagement. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Installation: Fig. 975 is the structural or transitional attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001, 4A or any approved TOLCO seismic bracing attachment to pipe to form a complete bracing assembly. NFPA 13 guidelines should be followed. To Install: Thread the Fig. 975 onto the threaded bracing pipe. Attachment can pivot for adjustment to proper brace angle. Bending of plate not permitted. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number and finish. Note: Bending of this fitting alters the material strength and voids the cULus Listing. Use Fig. 980, 910, 909, or any other TOLCO fitting when angled fitting is required. C Mounting Hardware Is Not Included D B A Brace Pipe Fig. 975 Fig. 1001 Lateral Brace Part Number 975-1/2 * 975-5/8 975-3/4 * Standard size. Brace Pipe Size in. (mm) 1" (25) 1" (25) 1" (25) A in. (mm) 4" (101.6) 4" (101.6) 4" (101.6) B in. (mm) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) C in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) Mounting Hole D in. (mm) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) Max. Design Load lbs. (kN) 2015 (8.96) 2015 (8.96) 2015 (8.96) Approx. Wt./100 lbs. (kg) 88 (39.9) 87 (39.4) 86 (39.0) Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 190 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 981 - Fast Attach � Universal Swivel Sway Brace Attachment Size Range: Fits bracing pipe 1" (25mm) thru 2" (50mm), 12 gauge (2.6mm) channel and all structural steel up to 1/4" (6.3mm) thick. Fig. 981-S fits rod sizes 3/8" thru 5/8". Fig. 981-L fits rod sizes 3/4" thru 7/8". Material: Steel Component of State of California OSHPD Approved Seismic Restraints System Set Screws Included Function: Multi-functional attachment to hanger rod, trapeze rod, structure or braced pipe fitting. Features: Fits multiple sizes of bracing pipe, strut or structural steel. Swivel allows adjustment to various surface angles. Breakaway bolt heads assure verification of proper installation torque. Unique "fast attach" yoke design fits multiple rod sizes; 3/8" thru 5/8" and 3/4" thru 7/8". "Stackable" design allows installation of both lateral and longitudinal braces to be easily installed on a single hanger rod, with no disassembly. Installation: Fig. 981 is the "braced pipe" attachment component of a lateral or longitudinal brace assembly. It is intended to be combined with the pipe hanger, all-thread rod, "bracing pipe" and TOLCO transitional and structural attachment component(s) to form a complete bracing assembly. NFPA 13 and or OSHPD guidelines should be followed. To Install: Spin nut on top of hanger counterclockwise to loosen the nut and raise it above the top of the hanger. Attach Fig. 981 by slipping the open side of the 981 yoke onto the all thread rod above the top of the hanger. Tighten 3/8" cone point set screw on yoke until head breaks-off to ensure proper installation torque. Spin the hex nut clockwise and tighten securely. Insert brace pipe into the jaw of the 981 and tighten the cone point set screw until the head breaks off ensuring proper installation torque. Pivot brace pipe to proper angle and attach to structure using a TOLCO swivel structural attachment. Approvals: Included in our Seismic Restraint Systems Guidelines, approved by the California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines. Finish: Electro-Galvanized Order By: Figure number, rod size US Patent Numbers Pat. #6,273,372, Pat. #7,097,141, Pat. #7,654,043, Pat. #7,654,043 B2 C B A D Shown with 1" Sch. 40 Pipe Brace Shown with Fig. 981 - Fast Attach Universal Swivel Sway Brace Attachment Fig. 200WON Band Hanger Part Number 981-S 981-L Rod Size Range 3/8" thru 5/8" 3/4" & 7/8" A in. (mm) 51/8" (130.2) 51/8" (130.2) B in. (mm) 41/8" (104.8) 41/8" (104.8) C in. (mm) 11/4" (31.7) 11/4" (31.7) Max. Horizontal D Design Load in. (mm) lbs. (kN) 21/4" (57.1) 21/4" (57.1) 2015 (8.96) 2015 (8.96) Approx. Wt./100 lbs. (kg) 88 (39.9) 82 (37.2) Shown with 12 Ga. Channel Brace Shown with Fig. 981 - Fast Attach Universal Swivel Sway Brace Attachment Shown with Trapeze Hanger Shown with 1" Sch. 40 Pipe Brace Shown with Fig. 1 Clevis Hanger with Fig. 1CBS Shown with Fig. 981 - Fast Attach Universal Swivel Sway Brace Attachment All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 191 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 980 - Universal Swivel Sway Brace Attachment - 3/8"-16 to 3/4"-10 rods TOLCOTM Fig. 980H - Universal Swivel Sway Brace Attachment - 7/8"-9 to 11/4"-7 rods Size Range: One size fits bracing pipe 1" (25mm) thru 2" (50mm), 12 gauge (2.6mm) channel, and all structural steel up to 1/4" (31.7mm) thick. Material: Steel. Stainless Steel Type 316 (SS6) optional. Function: Multi-functional attachment to structure or braced pipe fitting. Features: This product's design incorporates a concentric attachment opening which is critical to the performance of structural seismic connections. NFPA 13 (2010) 9.3.5.8.4 indicates clearly that fastener table load values are based only on concentric loading. Mounts to any surface angle. Break off bolt head assures verification of proper installation. Installation: Fig.980 is the structural or transitional attachment component of a longitudinal or lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001, 2002, 4L, 4A or 4B to form a complete bracing assembly. NFPA 13 and/or OSHPD guidelines should be followed. Component of State of California OSHPD Approved Seismic Restraints System Set Screw Included 980 D A B Mounting Hardware Is Not Included To Install: Place the Fig. 980 onto the "bracing pipe". Tighten the set screw until the head breaks off. Attachment can pivot for adjustment to proper brace angle. Approvals: --Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Approved by Factory Mutual Engineering (FM). Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines. Note: Fig. 980 Swivel Attachment and Fig. 1001, Fig. 1000, Fig. 2002, Fig. 4A, Fig. 4B or Fig. 4L pipe clamps make up a sway brace system of UL Listed attachments and bracing materials which satisfies the requirements of Underwriters Laboratories and the National Fire Protection Association (NFPA) Finish: Plain, Electro-Galvanized or Stainless Steel. Contact customer service for alternative finishes. Order By: Figure number and finish. 980H A Fig. 980 Fig. 1000 Shown D B Fig. 980 US Patent Numbers Pat. #6,273,372, Pat. #6,517,030, Pat. #6,953,174, Pat. #6,708,930, Pat. #7,191,987, Pat. #7,441,730, Pat. #7,669,806 Fig. 980 Brace Pipe Part Number 980-3/8 980-1/2 980-5/8 980-3/4 980H-7/8 980H-1 980H-11/8 980H-11/4 A in. (mm) 51/4" (133.3) 51/4" (133.3) 51/4" (133.3) 51/4" (133.3) 63/4" (171.4) 63/4" (171.4) 63/4" (171.4) 63/4" (171.4) B in. (mm) 17/8" (47.6) 17/8" (47.6) 17/8" (47.6) 17/8" (47.6) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) 31/2" (88.9) D* in. (mm) 13/32" (10.3) 17/32" (13.5) 11/16" (17.5) 13/16" (20.5) 15/16" (23.8) 11/16" (27.0) 13/16" (30.2) 15/16" (33.3) Max. Horizontal Max. Horizontal Design Load** (FM) Design Load (cULus) 30�-44� 45�-59� 60�-74� 75�-90� lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) lbs./(kN) 2015 1320 1970 2310 2550 (8.96) (5.87) (8.76) (10.27) (11.34) Approx. Wt./100 lbs. (kg) 149 (67.6) 148 (67.1) 147 (66.7) 146 (66.2) 402 (182.3) 400 (181.4) 397 (180.1) 390 (176.9) * Mounting attachment hole size. ** Installed with 1" or 11/4" Schedule 40 brace pipe. Important! - For load information when using Fig. 980 with pre-installed or post-installed concrete anchors in compliance with NFPA 13 (2016) or ASCE 7-10, including prying factors, see page 316. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 192 B-Line series Pipe Hangers & Supports Seismic Bracing TOLCOTM Fig. 985 - Mechanical Fast Clamp Size Range: Fig. 985-S fits rod sizes 3/8" thru 5/8" Fig. 985-L fits rod sizes 3/4" thru 7/8" rod sizes Material: Steel Function: Used for attachment of seismic bracing to pipe hanger or trapeze Features: Allows up to 12" (304.8mm) of adjustability in brace length, when used with Fig. 986. Break-off set screw heads visually verify required installation torque. Unique "Fast Attach" yoke design allows Fig. 985 to be installed to hanger rods 3/8" thru 5/8" or 3/4" thru 7/8" Finish: Electro-galvanized Order By: Figure number, rod size & finish Patent Pending Part Rod Number Size 985-S 985-L 3/8" thru 5/8" 3/4" & 7/8" A in. (mm) 2" (50.8) 2" (50.8) Max. Horizontal B Design Load in. (mm) lbs. (kN) 11/2" (38.1) 15/8" (41.3) 2015 (8.96) 2015 (8.96) Approx. Wt./100 lbs. (kg) 204 (92.5) 198 (89.8) TOLCOTM Fig. 986 - Mechanical Fast Clamp Size Range: Available with holes for 1/2"-13 thru 3/4"-10 fastener attachment. Material: Steel Function: Used for attachment of seismic bracing to structure or hanger. Features: Allows up to 12" (304.8mm) of adjustability in brace length, when used with Fig. 985. Break-off set screw heads visually verify required installation torque. Swivel allows adjustment to various surface angles. Finish: Electro-galvanized Order By: Figure number, rod size & finish Patent Pending Part Rod Hole Dia. Max. Horizontal Approx. Number Size D Design Load* Wt./100 in. (mm) lbs. (kN) lbs. (kg) 986-1/2 986-5/8 986-3/4 1/2" 9/16" (14.3) 2015 (8.96) 204 (92.5) 5/8" 11/16" (17.5) 2015 (8.96) 203 (92.1) 3/4" 13/16" (20.6) 2015 (8.96) 202 (91.6) * When used with 15/8" (41.3mm) x 15/8" (41.3mm) 12 Ga. (2.6mm) channel Seismic Bracing Set Screw Included B A Rod Size D Mounting Hardware Is Not Included Set Screw Included Fig. 986 Structural Attachment Max. 6" (152.4mm) Max. 6" (152.4mm) 15/8" (41.3mm) x 15/8" (41.3mm) 12 Ga. (2.6mm) Channel (Typ.) Fig. 985 Hanger or Trapeze Attachment All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 193 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. BRC CABLE - Pre-Stretched 7 x 19 Galvanized Aircraft Cable Size Range: Available in cable diameters of 1/8", 3/16", and 1/4" Material: Steel Function: Used for attachment of seismic bracing to structure or hanger. Features: Meets requirements of IBC 2009 and ASCE 7-05 for seismic bracing. Finish: Galvanized Order By: Figure number and size Note: Only pre-stretched aircraft cable should be used in seismic bracing installations where cable is used as the bracing component. Use of other types of cable will, over time, begin to sag and deform, thus rendering the bracing system to not perform properly. Part Number Cable Diameter in. (mm) Max. Rec. Load* lbs. (kN) Approx. Wt./100 Ft. lbs. (kg) BRC CABLE-1/8 1/8" (3.2) 975 (4.33) 2.9 (1.31) BRC CABLE-3/16 3/16" (4.8) 2050 (9.12) 6.5 (2.95) 7 x 19 BRC CABLE-1/4 1/4" (6.3) 3150 (14.01) 11.0 (4.99) * Cable breaking strength Fig. 990 Fig. 990 Pre-Stretched Cable Fig. 991 Cable Sway Brace Attachment Fig. 990 Cable Sway Brace Attachment Fig. 990 Fig. 990 Pre-Stretched Cable Fig. 990 Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 194 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 990 - Cable Sway Brace Attachment - 3/8"-16 to 3/4"-10 rods TOLCOTM Fig. 990H - Cable Sway Brace Attachment - 7/8"-9 to 11/4"-7 rods Component of State of California OSHPD Approved Seismic Restraints System Size Range: 1/8", 3/16" and 1/4" pre-stretched cable. Fig. 990 for 3/8", 1/2", 5/8", or 3/4" hanger rod, bolt, or fastener. Fig. 990H for 7/8", 1", 11/8", or 11/4" hanger rod, bolt, or fastener. Material: Steel Hardware Included As shown Mounting Hardware Is Not Included Function: Cable attachment for sway bracing. Attaches sway brace to structure or to hanger. To be used with 7 x 19 strand core pre-stretched galvanized aircraft cable. Features: Cable easily slides into oversized front arch opening. Breakaway hex nuts assure verification of proper installation. Will mount to any surface angle. Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint System Guidelines. Finish: Electro-Galvanized Order By: Figure number, cable size and mounting hole size. Note: Order 990H for hanger rod, bolt or fastener holes sized for 7/8" (22.2mm) thru 11/4" (31.7mm) rods. B 990 D A Cable ** Diameter in. (mm) 1/8" (3.2) 3/16" (4.8) 1/4" (6.3) 990 Dimensions A B in. (mm) in. (mm) 4 5/16" (14.3) 5" (127.0) 5" (127.0) 2" (50.8) 21/4" (57.1) 25/8" (66.7) 990H Dimensions A B in. (mm) in. (mm) 73/4" (196.8) 81/2" (215.9) 81/2" (215.9) 31/2" 88.9) 31/2" 88.9) 31/2" 88.9) * Maximum load rating controlled by cable breaking strength. Max. Horizontal Design Load * lbs. (kN) 975 (4.33) 2050 (9.12) 3150 (14.01) Part Number Rod Sizes 990-3/8 X ** 3/8" 990-1/2 X ** 1/2" 990-5/8 X ** 5/8" 990-3/4 X ** 3/4" 990H-7/8 X ** 7/8" 990H-1 X ** 1" 990H-11/8 X ** 11/8" 990H-11/4 X ** 11/4" D Dia. in. (mm) 13/32" (10.3) 17/32" (13.5) 11/16" (17.4) 13/16" (20.6) 15/16" (23.8) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) ** Insert cable diameter in part number. Approx. Wt./100 Varies Varies Varies Varies Varies Varies Varies Varies 990H D B A Fig. 990 Cable Sway Brace Attachment Fig. 990 Fig. 990 Fig. 990 Note: See Page 194 For Pre-Stretched Cable Information Fig. 990 Cable Sway Brace Attachment Fig. 1 Clevis Hanger & Fig.1CBS Clevis Cross Bolt Spacer All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 195 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 991 - Fast Attach � Cable Sway Brace Attachment Size Range: 1/8", 3/16" and 1/4" pre-stretched cable. Fig. 991S fits rod sizes 3/8" thru 5/8". Fig. 991L fits rod sizes 3/4" thru 7/8". Material: Steel Function: Cable attachment for sway bracing. Attaches sway brace to hanger rod. To be used with 7 x 19 strand core pre-stretched galvanized aircraft cable. Features: Cable easily slides into oversized front arch opening. Swivel allows adjustment to various surface angles. Break-away hex nuts assure verification of proper installation torque. Unique "Fast-Attach" yoke design fits multiple rod sizes; 3/8" thru 5/8" or 3/4" thru 7/8". To verify proper installation to hanger rod, simply install yoke to hanger rod and tighten 3/8" cone point set screw until head breaks off. "Stackable" design allows installation of both lateral and longitudinal braces, as well as opposing braces, to be easily installed on a single hanger rod, with no disassembly. The retrofit yoke has a visual verification of proper installation torque. Tighten existing hex nut down until the slight gap in the yoke assembly closes completely. Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint System Guidelines. Finish: Electro-Galvanized Order By: -- Figure number, rod size range 3/8" thru 5/8" or 3/4" thru 7/8" US Patent Numbers: Pat. #7,097,141, Pat. #7,654,043, Pat. #7,654,043 B2 Component of State of California OSHPD Approved Seismic Restraints System Hardware Included As Shown Part Number 991-S-1/8 991-S-3/16 991-S-1/4 Rod Sizes 3/8" thru 5/8" Cable Diameter in. (mm) 1/8" (3.2) 3/16" (4.8) 1/4" (6.3) A in. (mm) 45/16" (14.3) 5" (127.0) 5" (127.0) B in. (mm) 2" (50.8) 21/4" (57.1) 25/8" (66.7) Max. Horizontal Design Load* lbs. (kN) 975 (4.33) 2050 (9.12) 3150 (14.01) Approx. Wt./100 lbs. (kg) 128.3 (58.2) 182.1 (82.6) 221.1 (100.3) Part Number Rod Sizes Cable Diameter in. (mm) A in. (mm) B in. (mm) 991-L-1/8 991-L-3/16 991-L-1/4 3/4" 1/8" (3.2) 45/16" (14.3) 2" (50.8) & 3/16" (4.8) 5" (127.0) 21/4" (57.1) 7/8" 1/4" (6.3) 5" (127.0) 25/8" (66.7) * Maximum load rating controlled by cable breaking strength. Max. Horizontal Design Load* lbs. (kN) 975 (4.33) 2050 (9.12) 3150 (14.01) Approx. Wt./100 lbs. (kg) 122.3 (55.5) 176.1 (79.9) 215.1 (97.5) B A Fig. 990 Fig. 990 Fig. 991 Fig. 991 Note: See Page 194 For Pre-Stretched Cable Information Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 196 B-Line series Pipe Hangers & Supports Seismic Bracing TOLCOTM Fig. 3000 - CPVC Sway Brace Attachment Size Range: Pipe size to be braced: in 1" (25mm) thru 3" (80mm) pipe sizes Pipe size used for bracing 1" (25mm) Schedule 40 IPS Material: Steel Function: For bracing CPVC and steel pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system: Fig. 3000 is used in conjunction with a Fig. 900 Series fitting and joined together with bracing pipe per NFPA 13, forming a complete sway brace assembly. H Features: The Fig. 3000 is UL Listed as a sway brace to be used with both CPVC and (IPS) steel sprinkler pipe, in 1" (25mm) through 3" (80mm) diameters. The unique design does not compress the CPVC pipe, and the brace pipe to system pipe offset keeps the brace pipe from leaving harmful residue and oils on the CPVC pipe. Field adjustable, making critical pre-engineering of bracing pipe length unnecessary and requires no threading of bracing pipe. Comes assembled and ready for installation. Has a built-in visual verification of correct installation. See the following installation note. Installation Instructions: Slide the Fig. 3000 bracket over the brace member. Place the Fig. 3000 clamp over the pipe being braced, align the holes, and tighten the supplied bolts untill the underside of the bolt bottoms out against the Fig. 3000 clamp. The sway brace fitting is intended to be used with any Tolco 900 series transitional or 800 series structural attachments. Note: Brace member may be over or under the braced pipe. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Finish: Electro-Galvanized Order By: Figure number and pipe size. Important Note: Fig. 3000 is precision manufactured to perform its function as a critical component of a complete bracing assembly. To ensure performance, the UL Listing requires the Fig. 3000 must be used with other TOLCO bracing products. Fig. 3000 Clamp Seismic Bracing 15/8" W (41.3) 2" (50.8) Brace Member Supplied Bolts Part No. 3000-1 3000-11/4 3000-11/2 3000-2 3000-21/2 3000-3 CPVC or Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) H Height in. (mm) 325/32" (96.0) 41/8" (104.8) 43/8" (111.1) 43/4" (120.6) 51/4" (133.3) 57/8" (146.9) Pipe Fig. 3000 Bracket W Max. Design Load Width UL Listed in. (mm) Lbs. (kN) 41/4" (107.9) 41/2" (114.3) 43/4" (120.6) 6" (152.4) 61/2" (165.1) 7" (177.8) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) Approx. Wt./100 Lbs. (kg) 126 (57.1) 134 (60.8) 141 (63.9) 214 (97.1) 241 (109.3) 263 (119.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 197 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 1001 - Sway Brace Attachment (UL Listed) Size Range: Pipe size to be braced: 1" (25mm) thru 8" (200mm) IPS. Pipe size used for bracing: 1" (25mm) and 11/4" (32mm) Schedule 40 IPS. Material: Steel Function: For bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system: Fig. 1001 is used in conjunction with a Fig. 900 Series fitting and joined together with bracing pipe per NFPA 13, forming a complete sway brace assembly. Features: Can be used to brace schedule 7 through schedule 40 IPS. Field adjustable, making critical pre-engineering of bracing pipe length unnecessary. Unique design requires no threading of bracing pipe. Comes assembled and ready for installation. Fig. 1001 has built-in visual verification of correct installation. See installation note below. Installation Note: Position Fig. 1001 over the pipe to be braced and tighten two hex head cone point set bolts until heads bottom out. A minimum of 1" (25mm) pipe extension is recommended. Brace pipe can be installed on top or bottom of pipe to be braced. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For FM Approval information refer to FM Approved page 199. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Order by figure number, pipe size to be braced, followed by pipe size used for bracing (1" (25mm) or 11/4" (32mm)), and finish. Important Note: Fig. 1001 is precision manufactured to perform its function as a critical component of a complete bracing assembly. To ensure performance, the UL Listing requires that Fig. 1001 must be used only with other TOLCO bracing products. OPM Set Bolts Included Pipe Part Number & Approx. Wt./100 Size 1" (24mm) Brace Pipe 11/4" (32mm) Brace Pipe in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) 6" (150) 8" (200) 1001-1 X 1 1001-11/4 X 1 1001-11/2 X 1 1001-2 X 1 1001-21/2 X 1 1001-3 X 1 1001-4 X 1 1001-6 X 1 1001-8 X 1 Lbs. (kg) 100.0 (45.3) 100.0 (45.3) 100.0 (45.3) 108.0 (49.0) 138.6 (62.8) 147.2 (66.7) 160.9 (73.0) 190.0 (86.2) 217.4 (98.6) 1001-1 X 11/4 1001-11/4 X 11/4 1001-11/2 X 11/4 1001-2 X 11/4 1001-21/2 X 11/4 1001-3 X 11/4 1001-4 X 11/4 1001-6 X 11/4 1001-8 X 11/4 Note: Metric sizes are available, contact factory. Lbs. (kg) 118.0 (53.5) 114.0 (51.7) 115.0 (52.1) 121.0 (54.8) 160.4 (72.7) 168.7 (76,5) 182.4 (82.7) 211.4 (95.9) 238.8 (108.3) Design Load - Lbs. For Brace Pipe Size 1" / 11/4" Sch. 7 Sch. 10 Sch. 40 1" / 11/4" 1" / 11/4" 1" / 11/4" -- / -- 1000 / 1000 1000 / 1000 1000 / 1000 1000 / 1000 1000 / 1000 1000 / 1000 1500 / 1500 1500 / 1500 1000 / 1000 2015 / 2015 2015 / 2015 1600 / 1600 2015 / 2765 2015 / 2765 1600 / 1600 2015 / 2765 2015 / 2765 1600 / 1600 2015 / 2765 2015 / 2765 1600 / 1600 2015 / 2765 2015 / 2765 1600 / 1600 2015 / 2765 2015 / 2765 Eaton Fig. 1001 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 198 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 1001 - Sway Brace Attachment (FM Approved) Size Range: Pipe size to be braced: 1" (25mm) thru 8" (200mm) IPS. Pipe size used for bracing: 1" (25mm) and 11/4" (32mm) Schedule 40 IPS. Material: Steel Function: For bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system: Fig. 1001 is used in conjunction with a Fig. 900 Series fitting and joined together with bracing pipe per NFPA 13, forming a complete sway brace assembly. Features: Can be used to brace schedule 7 through schedule 40 IPS. Field adjustable, making critical pre-engineering of bracing pipe length unnecessary. Unique design requires no threading of bracing pipe. Can be used as a component of a four-way riser brace. Comes assembled and ready for installation. Fig. 1001 has built-in visual verification of correct installation. See installation note below. Installation Note: Position Fig. 1001 over the pipe to be braced and tighten two hex head cone point set bolts until heads bottom out. A minimum of 1" (25mm) pipe extension is recommended. Brace pipe can be installed on top or bottom of pipe to be braced. Approvals: Approved by Factory Mutual Engineering (FM). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For UL Listed information refer to UL Listed page 198. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Order by figure number, pipe size to be braced, followed by pipe size used for bracing (1" (25mm) or 11/4" (32mm)) , and finish. Important Note: Fig. 1001 is precision manufactured to perform its function as a critical component of a complete bracing assembly. To ensure performance, the FM Approval requires that Fig. 1001 must be used only with other TOLCO bracing products. Designed to meet or exceed requirements of FM DS 2-8. OPM Set Bolts Included Pipe Size in. (mm) Part Number & Approx. Wt./100 1" (24mm) Brace Pipe 11/4" (32mm) Brace Pipe Lbs. (kg) Lbs. (kg) Design Load - For Sch. 7, Sch. 10, & Sch. 40 Pipe Allowable Horizontal Capacity (lbf) Per Installation 1, 2, 3 30�-44� 45�-59� 60�-74� 75�-90� Lbs. (kN) Lbs. (kN) Lbs. (kN) Lbs. (kN) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 4" (100) 6" (150) 8" (200) 1001-1 X 1 1001-11/4 X 1 1001-11/2 X 1 1001-2 X 1 1001-21/2 X 1 1001-3 X 1 1001-4 X 1 1001-6 X 1 1001-8 X 1 100.0 (45.3) 100.0 (45.3) 100.0 (45.3) 108.0 (49.0) 138.6 (62.8) 147.2 (66.7) 160.9 (73.0) 190.0 (86.2) 217.4 (98.6) 1001-1 X 11/4 1001-11/4 X 11/4 1001-11/2 X 11/4 1001-2 X 11/4 1001-21/2 X 11/4 1001-3 X 11/4 1001-4 X 11/4 1001-6 X 11/4 1001-8 X 11/4 118.0 (53.5) 114.0 (51.7) 115.0 (52.1) 121.0 (54.9) 160.4 (72.7) 168.7 (76,5) 182.4 (82.7) 211.4 (95.9) 238.8 (108.3) 1800 (8.00) 1230 (5.47) 1230 (5.47) 1230 (5.47) 800 (3.56) 850 (3.78) 850 (3.78) 510 (2.27) 510 (2.27) 2550 (11.34) 1740 (7.74) 1740 (7.74) 1740 (7.74) 1130 (5.02) 1200 (5.34) 1200 (5.34) 730 (3.25) 730 (3.25) 3120 (13.88) 2140 (9.52) 2140 (9.52) 2140 (9.52) 1380 (6.14) 1470 (6.54) 1470 (6.54) 890 (3.96) 890 (3.96) 3490 (25.52) 2380 (10.58) 2380 (10.58) 2380 (10.58) 1540 (6.85) 1640 (7.29) 1640 (7.29) 990 (4.40) 990 (4.40) 1 FM Approved when used with 1 or 11/4 inch NPS Schedule 40 GB/T 3091,EN 10255H, or JIS G3451 steel pipe as the brace member. 2 Load rating for LW above refers to FM Approved Lightwall Pipe commonly referred to as "Schedule 7". These ratings may also be applied when EN 10220 and GB/T 8163 steel pipe. 3 Load rating for Schedule 10 above may be applied to GB/T 3092,EN 10255M and H, or JIS G3454, FM Approved Thinwall, or Schedule 40 steel pipes. Note: See UL load ratings in UL Listed Design Load chart shown under drawing. Note: Metric sizes are available, contact factory. Fig. 1001 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 199 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 1000 - "Fast Clamp" Branch Line Restraint Attachment (UL Listed) Size Range: Pipe size to be braced: 1" (25mm) thru 4" (100mm) 40 IPS. Pipe size used for bracing: 1" (25mm) and 11/4" (32mm) Schedule 40 IPS. For pipe sizes larger than 2" (500mm) please refer to TOLCO Fig. 1001. Material: Steel Function: A restraint device intended for lateral bracing. Features: Field adjustable, making critical pre-engineering of bracing pipe unnecessary. Unique design requires no threading of bracing pipe. Steel leaf spring insert provided to assure installer and inspector necessary minimum torque has been achieved. Installation: Fig. 1000 is the "braced pipe" attachment component of a lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO structural attachment component, Fig. 980, 910, 909 or other approved TOLCO component to form a complete bracing assembly. Follow NFPA 13 guidelines. To Install: Place the Fig. 1000 over the pipe to be braced, insert bracing pipe through opening leaving a minimum of 1" extension. Brace pipe can be installed on top or bottom of pipe to be braced. Tighten hex nuts until leaf spring is flat. It is recommended that the brace angle be adjusted before hex nuts are fully tightened. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Approved for use with engineered light wall sprinkler pipe up to 2" as a restraint device. Torque requirement is 6-8 ft./lbs. (8-10Nm). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For FM Approval information refer to FM Approved page 201. Application Note: Position Fast Clamp and tighten two hex nuts until leaf spring flattens. A minimum of 1" pipe extension beyond the Fig. 1000 is recommended. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Order by figure number, pipe size to be braced, followed by pipe size used for bracing (1" (25mm) or 11/4" (32mm)) , and finish. OPM Hardware Included * UL Listed 1" (25mm) thru 2" (50mm) pipe size Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) Part Number & Approx. Wt./100 1" (24mm) Brace Pipe 11/4" (32mm) Brace Pipe Lbs. (kg) Lbs. (kg) 1000-1 X 1 71.6 (32.5) 1000-1 X 11/4 75.8 (34.4) 1000-11/4 X 1 74.8 (33.9) 1000-11/4 X 11/4 79.1 (35.9) 1000-11/2 X 1 77.8 (35.3) 1000-11/2 X 11/4 82.1 (37.2) 1000-2 X 1 84.1 (38.1) 1000-2 X 11/4 88.4 (40.1) Fig. 1000 Fig. 980 Lateral Brace Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 200 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 1000 - "Fast Clamp" Sway Brace Attachment (FM Approved) Size Range: Pipe size to be braced: 1" (25mm) thru 4" (100mm) 40 IPS. Pipe size used for bracing: 1" (25mm) and 11/4" (32mm) Schedule 40 IPS. For pipe sizes larger than 4" (100mm) please refer to TOLCO Fig. 1001. Material: Steel Function: For bracing pipe against sway and seismic disturbance. Features: Field adjustable, making critical pre-engineering of bracing pipe unnecessary. Unique design requires no threading of bracing pipe. Steel leaf spring insert provided to assure installer and inspector necessary minimum torque has been achieved. Installation: Fig. 1000 is the "braced pipe" attachment component of a lateral sway brace assembly. It is intended to be combined with the "bracing pipe" and TOLCO structural attachment component, Fig. 980 or other approved TOLCO seismic brace to form a complete bracing assembly. Follow NFPA 13 guidelines. To Install: Place the Fig. 1000 over the pipe to be braced, insert bracing pipe through opening leaving a minimum of 1" extension. Brace pipe can be installed on top or bottom of pipe to be braced. Tighten hex nuts until leaf spring is flat. It is recommended that the brace angle be adjusted before hex nuts are fully tightened. Approvals: Approved by Factory Mutual Engineering (FM). Included in our Seismic Engineering Guidelines approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to our Seismic Engineering Guidelines, OPM-0052-13. For UL Listed information refer to UL Listed page 200. Application Note: Position Fast Clamp and tighten two hex nuts until leaf spring flattens. A minimum of 1" pipe extension beyond the Fig. 1000 is recommended. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Order by figure number, pipe size to be braced, followed by pipe size used for bracing (1" (25mm) or 11/4" (32mm)) , and finish. Designed to meet or exceed requirements of FM DS 2-8. OPM Hardware Included Fig. 1000 Fig. 980 Lateral Brace Pipe Size in. (mm) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) Part Number & Approx. Wt./100 1" (24mm) Brace Pipe 11/4" (32mm) Brace Pipe Lbs. (kg) Lbs. (kg) 1000-1 X 1 71.6 (32.5) 1000-1 X 11/4 75.8 (34.4) 1000-11/4 X 1 74.8 (33.9) 1000-11/4 X 11/4 79.1 (35.9) 1000-11/2 X 1 77.8 (35.3) 1000-11/2 X 11/4 82.1 (37.2) 1000-2 X 1 84.1 (38.1) 1000-2 X 11/4 88.4 (40.1) 1000-21/2 X 1 90.2 (40.9) 1000-21/2 X 11/4 94.6 (42.9) 1000-3 X 1 97.3 (44.1) 1000-3 X 11/4 101.7 (46.1) 1000-31/2 X 1 104.0 (47.2) 1000-31/2 X 11/4 108.4 (49.2) 1000-4 X 1 110.3 (50.0) 1000-4 X 11/4 114.6 (52.0) Design Load - Allowable Horizontal Capacity (lbf) Per Installation 1, 2, 3 30�-44� 45�-59� 60�-74� 75�-90� Lbs. (kN) Lbs. (kN) Lbs. (kN) Lbs. (kN) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69) 200 (0.89) 280 (1.24) 340 (1.51) 380 (1.69) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00) 230 (1.02) 320 (1.42) 400 (1.78) 450 (2.00) 1 FM Approved when used with 1, 11/4, 11/2, or 2 inch NPS Schedule 40 GB/T 3091,EN 10255H, or JIS G3451 steel pipe as the brace member. 2 Load rating for LW above refers to FM Approved Lightwall Pipe commonly referred to as "Schedule 7". These ratings may also be applied when EN 10220 and GB/T 8163 steel pipe. 3 Load rating for Schedule 10 above may be applied to GB/T 3092,EN 10255M and H, or JIS G3454, FM Approved Thinwall, or Schedule 40 steel pipes. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 201 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 2002 - Sway Brace Attachment (UL Listed) Size Range: Pipe size to be braced: 21/2" (65mm) thru 8" (200mm) all steel schedules. Consult factory when bracing other than steel. The Fig. 2002 accepts brace pipes sizes 11/2" (40mm) and 2" (50mm) steel schedule 10 through schedule 40. Material: Steel Function: For bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system: Fig. 2002 is used in conjunction with a TOLCO Fig. 980 sway brace attachment and joined together with bracing pipe. Install per NFPA 13. Features: Easy verification of proper installation by tightening bolts until ears touch. Installation: Place Fig. 2002 over pipe to be braced. Slide bracing pipe through attachment and tighten hex nuts until ears touch. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Figure number, pipe size to be braced, pipe size used for bracing (11/2" (40mm) or 2" (50mm)) and finish. Important Note: Fig. 2002 is precision manufactured to perform its function as a critical component of a complete bracing assembly. To ensure performance, the UL Listing requires that the Fig. 2002 must be used only with other TOLCO bracing products. Fig. 2002 Hardware Included Shown with Fig. 980 1" (25.4mm) Min. Pipe Size in. (mm) 21/2" (65) 3" (80) 4" (100) 6" (150) 8" (200) Part Number & Approx. Wt./100 11/2" (32mm) Brace Pipe 2" (50mm) Brace Pipe Lbs. (kg) Lbs. (kg) 2002-21/2 X 11/2 2002-3 X 11/2 2002-4 X 11/2 2002-6 X 11/2 2002-8 X 11/2 224.9 (102.0) 241.0 (109.3) 268.4 (121.7) 326.6 (148.1) 381.3 (172.9) 2002-21/2 X 2 2002-3 X 2 2002-4 X 2 2002-6 X 2 2002-8 X 2 283.3 (128.6) 299.4 (135.8) 326.8 (148.2) 385.0 (174.6) 439.7 (199.4) Design Load Lbs. (kN) 2015 (8.96) 2015 (8.96) 2015 (8.96) 2015 (8.96) 2015 (8.96) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Revised June-7-2017 202 B-Line series Pipe Hangers & Supports Seismic Bracing B335-2 Series - Three Hole Adjustable Hinge Function: For bracing strut channel trapeze supports. Finish: Zinc Plated or Dura-GreenTM paint. Part Number & Size B335-2-3/8 B335-2-1/2 B335-2-5/8 B335-2-3/4 Hole Size H in. (mm) 1/2" (11.1) 9/16" (14.3) 11/16" (17.4) 13/16" (20.6) Approx. Wt./100 lbs. (kg) 96 (43.2) 94 (42.3) 92 (41.4) 90 (40.6) Seismic Bracing Mounting Hardware Is Not Included H - Hole Size This Hole Only 213/16" (71.4mm) 411/16" (119.1mm) B650 Series - Seismic Retrofit Bracket Function: Allows for bracing swivel in two planes. Application: Use 1/2" bolts & channel nuts on the two hole side of the fitting. (Torque to 50 ft.-lbs.) Finish: Zinc Plated B129 Mounting Hardware Is Not Included ATR Bracket 9/16" Dia. (14.3mm) Holes Slot Opening For Rod Size 2" (50.8mm) 11/2" (38.1mm) 43/16" (106.4mm) 113/16" (46.0mm) 2" (50.8mm) 31/2" (88.9mm) Slot Opening For Rod Size 15/8" (41.3mm) 121/32" (42.1mm) Key 9/16" Dia. (14.3mm) Holes Part Number B650-3/8 B650-1/2 B650-5/8 B650-3/4 Rod Size 3/8" 1/2" 5/8" 3/4" TL in. (kN) 1100 (4.89) 1500 (6.67) 1500 (6.67) 1500 (6.67) LL in. (kN) 1100 (4.89) 1500 (6.67) 1500 (6.67) 1500 (6.67) Approx. Wt./100 lbs. (kg) 92 (41.4) 97 (43.6) 95 (42.7) 107 (48.5) Longitudal Load (LL) Transverse Load (TL) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 203 Eaton Seismic Bracing Seismic Bracing Fig. 76 - TOLCOTM Structural Attachment for Branch Line Restraint Assembly (UL Listed) Size Range: 3/8" and 1/2" all threaded rod (ATR) Material: Steel Function: Structural attachment for restraint (sway brace) or hanger assembly Features: The Fig. 76 has multiple sized fastener holes to accommodate multiple types of fasteners for various types of structures (concrete, wood and steel) see table below. It can be bent in the field to accommodate multiple angles, but is supplied fixed at 45� to accommodate the most common installation configuration. Its open design allows easy inspection to verify thread engagement. It will fit both 3/8" and �" all thread rod to accommodate changing field conditions when longer brace material is required. It is UL listed both as a restraint and as a hanger attachment for up to 4" (IPS) pipe size. Installation Instructions: Follow fastener manufacturer and NFPA 13 guidelines to install appropriate fastener for the structural type (i.e. concrete, wood, steel). Install all thread rod (brace member) to TOLCOTM Fig. 76 structural attachment. Bottom out ATR to ensure full thread engagement. This can be visually confirmed due to the open thread design. For more information visit our website for the most up to date instructions sheets. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). For FM Approval information refer to FM Approved page 205. Finish: Pre-Galvanized. Order By: Figure number. Structural Attachment for Branch Line Restraint Maximum Allowable Loads (UL Listed) Part No. 3/8" Rod 1/2" Rod Fig. 76 300 lbs. 300 lbs. Loads shown are axial ASD loads. Fasteners to use with Fig 76 (Up to 2" IPS pipe size) per NFPA 13 Structure Type Fastener Type Fastener Fastener NFPA 13 (2013 & 2016) Diameter Embedment Reference Concrete Concrete Steel Through Bolt Post Installed Anchors Through Bolt Steel Beam Clamp Wood (1) 3/8" lag screw 3/8" Various 3/8" 3/8" 3/8" N/A Various N/A N/A 2 1/2" 9.1.3.10.1 9.1.3 - 9.1.3.8 9.1.4.5.1 UL Listed Beam Clamp with Retaining Strap 9.1.5.3.1 Wood (2) #10 wood #10 1" screws All Thread Rod Maximum Restraint Lengths Rod Size (in) Root Dia. (in) Least Radius of Gyration r (in) Maximum Unbraced Length L - (in.) Max. Horizontal Load @ 45� (lbs.)** l/r=100 l/r=200 l/r=300 l/r=400 l/r=100 l/r=200 l/r=300 l/r=400 3/8 0.300 1/2 0.404 0.075 0.101 7 14 22 10 20 30 30 300 186 82 44 40 300 300 152 85 l/r = 400 NFPA 13 2010, Sec 9.3.6.1 (5) l/r = 400 NFPA 13 2013 & 2016,Sec 9.3.6.1 (5) & NFPA (2016) TABLE 9.3.11.8(a)(b)(c)(d)(e)(f) **Per NFPA 13 (2013) Table 9.3.5.11.8 (a)(b)(c), consult for maximum allowable load information on ATR. Max load governed by Fig. 76/77 Max horizontal load. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 204 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing Fig. 76 - TOLCOTM Structural Attachment for Sway Brace Assembly (FM Approved) Size Range: 3/8" and 1/2" all threaded rod (ATR) Material: Steel Function: Structural attachment for restraint (sway brace) assembly Features: The Fig. 76 has multiple sized fastener holes to accommodate multiple types of fasteners for various types of structures (steel, wood or concrete). It can be bent in the field to accommodate multiple angles, but is supplied fixed at 45� to accommodate the most common installation configuration. Its open design allows easy inspection to verify thread engagement. It will fit both 3/8" and �" all thread rod to accommodate changing field conditions when longer brace material is required. Installation Instructions: Follow fastener manufacturer and NFPA 13 guidelines to install appropriate fastener for the structural type (i.e. concrete, wood, steel). Install all thread rod (brace member) to TOLCOTM Fig. 76 structural attachment. Bottom out ATR to ensure full thread engagement. This can be visually confirmed due to the open thread design. For more information visit our website for the most up to date instructions sheets. Approvals: Approved by Factory Mutual Engineering (FM). For UL Listed information refer to UL Listed page 204. Finish: Pre-Galvanized. Order By: Figure number. Structural Attachment for Restraint (Sway Brace) Maximum Allowable Loads (FM Approved) Part No. 30�-44� 3/8" Rod 1/2" Rod lbs. lbs. 45�-59� 3/8" Rod 1/2" Rod lbs. lbs. Fig. 76 380 420 530 580 Loads shown are axial ASD loads. 60�-74� 3/8" Rod 1/2" Rod lbs. lbs. 800 1,020 75�-90� 3/8" Rod 1/2" Rod lbs. lbs. 750 1,110 Fasteners to use with Fig 76 (Up to 2" IPS pipe size) per NFPA 13 Structure Type Fastener Type Fastener Fastener NFPA 13 (2013 & 2016) Diameter Embedment Reference Concrete Concrete Steel Through Bolt Post Installed Anchors Through Bolt Steel Beam Clamp Wood (1) 3/8" lag screw 3/8" Various 3/8" 3/8" 3/8" N/A Various N/A N/A 2 1/2" 9.1.3.10.1 9.1.3 - 9.1.3.8 9.1.4.5.1 FM Approved Beam Clamp with Retaining Strap 9.1.5.3.1 Wood (2) #10 wood #10 1" screws All Thread Rod Maximum Restraint Lengths Rod Size (in) Root Dia. (in) Least Radius of Gyration r (in) Maximum Unbraced Length L - (in.) l/r=100 l/r=200 l/r=300 l/r=400 Max. Horizontal Load @ 45� (lbs.)** l/r=100 l/r=200 l/r=300 l/r=400 3/8 0.300 1/2 0.404 0.075 0.101 7 14 22 10 20 30 30 300 186 82 44 40 300 300 152 85 l/r = 400 NFPA 13 2010, Sec 9.3.6.1 (5) l/r = 400 NFPA 13 2013 & 2016,Sec 9.3.6.1 (5) & NFPA (2016) TABLE 9.3.11.8(a)(b)(c)(d)(e)(f) **Per NFPA 13 (2013) Table 9.3.5.11.8 (a)(b)(c), consult for maximum allowable load information on ATR. Max load governed by Fig. 76/77 Max horizontal load. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 205 Eaton Seismic Bracing Seismic Bracing TOLCOTM Fig. 77 - System Piping Attachment for Restraint Assembly (UL Listed) For CPVC & Steel Pipe Size Range: 3/8" and 1/2" all threaded rod (ATR) Material: Steel Function: System attachment for restraint (sway brace) assembly Features: The Fig. 77 is UL Listed to be used with both (IPS) steel and CPVC fire sprinkler pipe, in 1" through 2" diameters. It fits multiple rod diameters allowing for field adjustment if longer brace material is needed. Its sturdy break-off bolt will not strip and verifies proper installation. Its snap on design has many advantages. It can be installed with one-hand, can easily position the brace all thread rod over the top of the pipe being braced or underneath the pipe being braced to accommodate the desired brace angle. It can be fixed in place or moved to a new location by sliding along the pipe or snapping on or off and relocating. An entire prefabricated assembly (Fig. 76 & 77 joined with ATR) can be pre-assembled to save time and labor and later be field installed and adjusted to fit. Installation Instructions: Install TOLCOTM Fig. 77 system attachment to sprinkler pipe branch line to be restrained. You can position with the rod engagement either above or below the sprinkler pipe. Rod must extend a min. of 1" (25.4) past the edge of the Fig. 77. The attachment can be slid along the pipe to position close to where the Fig. 76 structural attachment will be fastened to the structure. The snap on design allows maximum adjustability during this stage of the installation process. Engage ATR (previously attached to the Fig. 76 structural attachment to the rod engagement portion of the Fig. 77 system attachment. Tighten set bolt on Fig. 77 system attachment until head breaks off verifying proper installation torque. For more information visit our website for the most up to date instructions sheets. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). For FM Approved information refer to FM Approved page 207. Finish: Pre-Galvanized. Order By: Figure number and pipe size. Pipe Attachment for Branch Line Restraint Patent Pending Part No. 77-1 77-11/4 77-11/2 77-2 Pipe Size in. (mm) 1 (25) 11/4 (32) 11/2 (40) 2 (50) Max.Design Loads (UL Listed) 3/8" Rod 1/2" Rod lbs. (kN) lbs. (kN) 300 (1.33) 300 (1.33) * These loads apply to IPS steel, Sch.10, Sch. 40, engineered lightwall piping, and CPVC plastic pipe. Loads shown are axial ASD loads. � All other trademarks are property of their respective owners. All Thread Rod Maximum Restraint Lengths Rod Size in. 3/8-16 1/2-13 Root Dia. in. (mm) Least Radius of Gyration r in. (mm) 0.300 (7.6) 0.075 (1.9) 0.404 (10.2) 0.101 (2.5) Maximum Unbraced Length L - (in.) Max. Horizontal Load @ 45� (lbs.)** l/r=100 in. (mm) 7 (177.8) 10 (254.0) l/r=200 in. (mm) 14 (355.6) 20 (508.0) l/r=300 in. (mm) 22 (558.8) 30 (762.0) l/r=400 l/r=100 l/r=200 in. (mm) lbs. (kN) lbs. (kN) 30 (763.0) 300 (1.33) 186 (0.82) 40 (1016.0) 300 (1.33) 300 (1.33) l/r=300 lbs. (kN) 82 (0.36) 152 (0.67) l/r=400 lbs. (kN) 44 (0.19) 85 (0.38) l/r = 400 NFPA 13 2010, Sec 9.3.6.1 (5) l/r = 400 NFPA 13 2013 & 2016,Sec 9.3.6.1 (5) & NFPA (2016) TABLE 9.3.11.8(a)(b)(c)(d)(e)(f) **Per NFPA 13 (2013) Table 9.3.5.11.8 (a)(b)(c), consult for maximum allowable load information on ATR. Max load governed by Fig. 76/77 Max horizontal load. Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 206 B-Line series Pipe Hangers & Supports Seismic Bracing Seismic Bracing TOLCOTM Fig. 77 - System Piping Attachment for Sway Brace Assembly (FM Approved) For CPVC & Steel Pipe Size Range: 3/8" and 1/2" all threaded rod (ATR) Material: Steel Function: System attachment for restraint Features: The Fig. 77 is to be used with both (IPS) steel and CPVC fire sprinkler pipe, in 1" through 2" diameters. It fits multiple rod diameters allowing for field adjustment if longer brace material is needed. Its sturdy break-off bolt will not strip and verifies proper installation. Its snap on design has many advantages. It can be installed with one-hand, can easily position the brace all thread rod over the top of the pipe being braced or underneath the pipe being braced to accommodate the desired brace angle. It can be fixed in place or moved to a new location by sliding along the pipe or snapping on or off and relocating. An entire prefabricated assembly (Fig. 76 & 77 joined with ATR) can be pre-assembled to save time and labor and later be field installed and adjusted to fit. Installation Instructions: Install TOLCOTM Fig. 77 system attachment to sprinkler pipe branch line to be restrained. It can be positioned with the rod engagement either above or below the sprinkler pipe. Rod must extend a min. of 1" past the edge of the Fig. 77. The attachment can be slid along the pipe to position close to where the Fig. 76 structural attachment will be fastened to the structure. The snap on design allows maximum adjustability during this stage of the installation process. Engage ATR (previously attached to the Fig. 76 structural attachment to the rod engagement portion of the Fig. 77 system attachment. Tighten set bolt on Fig. 77 system attachment until head breaks off verifying proper installation torque. For more information visit our website for the most up to date instructions sheets. Approvals: Approved by Factory Mutual Engineering (FM). For UL Listed information refer to UL Listed page 206. Finish: Pre-Galvanized. Order By: Figure number and pipe size. Pipe Attachment for Restraint (Sway Brace) Patent Pending Part No. Pipe Size in. (mm) 30�-44� 3/8" Rod 1/2" Rod lbs. (kN) lbs. (kN) 77-1 1 (25) 140 (0.62) 160 (0.71) 77-11/4 11/4 (32) 140 (0.62) 170 (0.75) 77-11/2 11/2 (40) 130 (0.58) 160 (0.62) 77-2 2 (50) 120 (0.53) 150 (0.67) * Loads shown are axial ASD loads. Maximum Allowable Loads (FM Approved)* 45�-59� 60�-74� 3/8" Rod 1/2" Rod 3/8" Rod 1/2" Rod lbs. (kN) lbs. (kN) lbs. (kN) lbs. (kN) 75�-90� 3/8" Rod 1/2" Rod lbs. (kN) lbs. (kN) 200 (0.89) 230 (1.02) 250 (1.11) 280 (1.24) 280 (1.24) 320 (1.42) 200 (0.89) 250 (1.11) 250 (1.11) 300 (1.33) 280 (1.24) 340 (1.51) 190 (0.84) 230 (1.02) 230 (1.02) 280 (1.24) 260 (1.15) 320 (1.42) 170 (0.75) 210 (0.93) 210 (0.93) 260 (1.15) 240 (1.07) 290 (1.29) All Thread Rod Maximum Restraint Lengths Rod Size in. 3/8-16 1/2-13 Root Dia. in. (mm) Least Radius of Gyration r in. (mm) 0.300 (7.6) 0.075 (1.9) 0.404 (10.2) 0.101 (2.5) Maximum Unbraced Length L - (in.) Max. Horizontal Load @ 45� (lbs.)** l/r=100 in. (mm) 7 (177.8) 10 (254.0) l/r=200 in. (mm) 14 (355.6) 20 (508.0) l/r=300D in. (mm) 22 (558.8) 30 (762.0) l/r=400D l/r=100 l/r=200 in. (mm) lbs. (kN) lbs. (kN) 30 (763.0) 300 (1.33) 186 (0.82) 40 (1016.0) 300 (1.33) 300 (1.33) l/r=300D lbs. (kN) 82 (0.36) 152 (0.67) l/r=400D lbs. (kN) 44 (0.19) 85 (0.38) l/r = 400 NFPA 13 2010, Sec 9.3.6.1 (5) l/r = 400 NFPA 13 2013 & 2016,Sec 9.3.6.1 (5) & NFPA (2016) TABLE 9.3.11.8(a)(b)(c)(d)(e)(f) **Per NFPA 13 (2013) Table 9.3.5.11.8 (a)(b)(c), consult for maximum allowable load information on ATR. Max load governed by Fig. 76/77 Max horizontal load. D l/r = 300 for bracing D l/r = 400 for restraint Eaton's B-Line series seismic bracing components are designed to be compatible only with other B-Line series bracing components, resulting in a listed seismic bracing assembly. Eaton B-Line Division warranty for seismic bracing components will be the warranty provided in Eaton B-Line Division standard terms and conditions of sale made available by Eaton, except that, in addition to the other exclusions from Eaton B-Line Division warranty, Eaton makes no warranty relating to B-Line series seismic bracing components that are combined with products not provided by Eaton. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 207 Eaton Concrete Inserts Concrete Inserts Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREENTM and other special coatings are available upon request. Approvals (as noted) Items in this section are Underwriters Laboratories Listed and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 208 B-Line series Pipe Hangers & Supports B3019 - Adjustable Metal Deck Ceiling Bolt Size Range: 3/8"-16 thru 3/4"-10 rod Material: Steel Function: For use in metal deck formed concrete to attach hanger rods. Allows for pre-positioning of hanger rods in poured concrete decks. Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Contact Cooper B-Line for alternative finishes and materials. Order By: Part number and finish. Contact customer service for custom rod lengths. Concrete Inserts Steel Size B D D Underside of anchor bolt to bottom of plate Thread Size 'A' with Thread Length 'C' Concrete Inserts Part No. B3019-3/8 B3019-1/2 B3019-5/8 B3019-3/4 Thread Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 B in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) Thread Length C in. (mm) 63/8" (161.9) 61/2" (165.1) 63/4" (171.4) 63/16" (157.2) D in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 21/4" (57.1) Steel Size in. (mm) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 1/4" x 3" x 10" (6.3 x 76.2 x 254.0) Design Load Lbs (kN) 730 (3.25) 1350 (6.00) 2160 (9.61) 3230 (14.37) Approx. Wt./100 Lbs. (kg) 80 (36.3) 99 (44.9) 129 (58.5) 238 (107.9) B2499 - Concrete Insert Size Range: 5/8"-11 thru 11/2"-6 rod Material: Steel Function: Designed to be embedded in concrete to provide a point of support for 5/8"-11 thru 11/2"-6 rod or bolt sizes . A Finish: Plain anchor bolt with Electro-Galvanized coupling. Contact B-Line for alternative finishes and materials. Note: For rod sizes 3/8"-16 and 1/2"-13, refer to B2501 A see page 198. Order By: Part number and rod size. For 11/8"-7, 11/4"-6, and 11/2"-6 consult factory. B 3/16" Dia. (4.8) Part No. B2499-5/8 B2499-3/4 B2499-7/8 B2499-1 Rod Size 5/8"-11 3/4"-10 7/8"-9 1"-8 A in. (mm) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) Min. Embedment B in. (m) Max. Recommended Loads (In 3000 lb. (13.34kN) Hard Rock Concrete) lbs. (kN) Approx. Wt./100 lbs. (kg) 31/2" (88.9) 1810 (8.05) 118.0 (53.5) 31/2" (88.9) 2710 (12.05) 154.0 (69.8) 4" (101.6) 3770 (16.77) 210.0 (95.3) 4" (101.6) 4960 (22.06) 276.0 (125.2) Consult factory for specifications on rod sizes 11/8"-7, 11/4"-6, and 11/2"-6 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 209 Eaton Concrete Inserts TOLCOTM Fig. 109DD - DDI+TM - Concrete Deck Insert - Hanger Application Size Range: 3/8"-16 thru 7/8"-9 rod Material: Steel Function: For use in concrete filled metal deck (20 GA. min.) assemblies (i.e. pan deck, Q-deck) applications. After installation, the threaded male hanger of the insert protrudes below the surface of the deck. The threaded bolt offers adjustability for precise height requirements and guarantees the minimum embedment depth. The longer plate enables a variety of installation locations across the deck. Pre-mounted drill screws included for installation. Approvals: International Code Council, Evaluation Service (ICC-ES), ESR-3958 for concrete, for 3/8"-16 thru 5/8"-11" anchor sizes. Approved for seismic and wind loading. UL (Underwriters Laboratories) Listed FM (Factory Mutual) Approved Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Order By: Figure number, rod size and finish. Applications Per NFPA 13 (2010): UL Listed as a component of a hanger assembly per Section 9.1.1.4.1 See dimensions and installation Detail below. Note: Fig. 109DD replaces Fig. 109A which has been discontinued. 16" (406mm) x Anchor Dia. Minimum 3/4" (19.0mm) Minimum 16" (406mm) x Anchor Dia. Minimum 3/4" (19.0mm) Minimum W 12" (304.8mm) T Bolt Length 8" (203.2mm) `D' 3/4" (19.0mm) 1� Minimum A Fig. 109DD 16" (406mm) x Anchor Dia. Minimum 3/4" (19.0mm) Minimum `D' `D' `D' Concrete Inserts Edge of Concrete Edge of Concrete Edge of Concrete Fig. 109DD Part No. 109DD-3/8 109DD-1/2 109DD-5/8 109DD-3/4 109DD-7/8 Rod Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 T in. (mm) 3/16" (4.7) 3/16" (4.7) 3/16" (4.7) 3/8" (9.5) 3/8" (9.5) W in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 2" (50.8) 2" (50.8) Fig. 109DD 11/4" (25.4mm) Minimum Max. Vertical Load lbs. (kn) 467 (2.08) 680 (3.02) 647 (2.88) 612 2.72) 577 (2.56) `D' Min. Anchor Embedment Depth in. (mm) Approx. Wt./100 lbs. (kg) 21/2" (63.5) 98.1 (44.5) 21/2" (63.5) 112.8 (51.1) 21/2" (63.5) 139.3 (63.2) 21/2" (63.5) 112.8 (153.6) 21/2" (63.5) 381.2 (172.9) Fig. 109DD NOTES: 1. Mounting holes are standard. If the plate is not mechanically secured to the deck ribs, a jam nut is required to prevent the anchor bolt from laying over when concrete is poured. There is no structural strength added from the use of a mechanical fastener to hold the product in place before the pour. 2. Minimum spacing between inserts shall be not less than 3 times the embedment depth or 12 times the anchor diameter (whichever is greater) DDi+TM is a registered trademark used by DEWALT� All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Eaton 210 B-Line series Pipe Hangers & Supports TOLCOTM Fig. 109DD-DDI+TM - Concrete Deck Insert - Brace Application Size Range: 3/8"-16 thru 7/8"-9 rod Material: Steel Function: For use in concrete filled metal deck (20 GA. min.) assemblies (i.e. pan deck, Q-deck) applications. After installation, the threaded male hanger of the insert protrudes below the surface of the deck. The threaded bolt offers adjustability for precise height requirements and guarantees the minimum W embedment depth. The longer plate enables a variety of installation locations across the deck. Pre-mounted drill screws included for installation. Approvals: International Code Council, Evaluation Service (ICC-ES), T ESR-3958 for concrete, for 3/8"-16 thru 5/8"-11" anchor sizes. Approved for seismic and wind loading. UL (Underwriters Laboratories) Listed FM (Factory Mutual) Approved Finish: Plate: Plain Steel. Rod: Electro-Galvanized. Order By: Figure number, rod size and finish. Applications Per NFPA 13 (2010): UL Listed as a component of a hanger assembly per Section 9.1.1.4.1 See dimensions and installation Detail below. Note: Fig. 109DD replaces Fig. 109A which has been discontinued. Concrete Inserts 12" (304.8mm) Bolt Length 8" (203.2mm) 16" (406mm) x Anchor Dia. Minimum 3/4" (19.0mm) Minimum 16" (406mm) x Anchor Dia. Minimum 3/4" (19.0mm) Minimum 16" (406mm) x Anchor Dia. Minimum 3/4" (19.0mm) Minimum `D' `D' `D' Edge of Concrete Edge of Concrete Edge of Concrete Concrete Inserts Detail 1 Fig. 109DD Fig. 109DD Detail 2 11/4" (25.4mm) Minimum Fig. 109DD Detail 3 Part No. 109DD-3/8 109DD-1/2 109DD-5/8 109DD-3/4 109DD-7/8 Rod Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 T in. (mm) 3/16" (4.7) 3/16" (4.7) 3/16" (4.7) 3/8" (9.5) 3/8" (9.5) W in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 2" (50.8) 2" (50.8) Details 1 & 2 Max. Horizontal Load Brace At 45� lbs. (kN) 311 (1.38) 424 (1.89) 482 (2.14) 482 (2.14) 482 (2.14) Detail 3 Max. Horizontal Load Brace At 45� lbs. (kN) 257 (1.14) 332 (1.48) 363 (1.61) 363 (1.61) 363 (1.61) `D' Min. Anchor Embedment Depth in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) Approx. Wt./100 lbs. (kg) 98.1 (44.5) 112.8 (51.1) 139.3 (63.2) 338.7 (153.6) 381.2 (172.9) Seismic bracing design load calculated in compliance with the requirements of IBC 2015 / CBC 2016. NOTES: 1. Mounting holes are standard. If the plate is not mechanically secured to the deck ribs, a jam nut is required to prevent the anchor bolt from laying over when concrete is poured. There is no structural strength added from the use of a mechanical fastener to hold the product in place before the pour. 2. Minimum spacing between inserts shall be not less than 3 times the embedment depth or 12 times the anchor diameter (whichever is greater) DDi+TM is a registered trademark used by DEWALT� All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 211 Eaton Concrete Inserts B2500 - Light Duty Spot Insert Material: Steel Function: Designed to be embedded in concrete to attach 1/4"-20 to 7/8"-9 hanger rods. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the knockout can be removed from the insert. The N2500 insert nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert but should not be forced further to avoid damaging the insert. Approvals: Underwriters Laboratories Listed for maximum pipe size 6" (150). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 18. Weight: Approx. Wt./100 - 46 Lbs. (20.8kg) Finish: Electro-Galvanized. Order By: Part number and finish. (Order N2500 nuts separately). Design Load: Loading based on a straight pull of 600 Lbs. (2.67kN). Note: Before installation ensure that concrete is sufficient to carry the load. 2" (50.8) 31/4" (82.5) 19/16" (39.7) 11/2" (38.1) Hanger Rod and Nut Not Included Material Thickness 12 Gauge (2.6) Concrete Inserts N2500 - Steel Insert Nut Size Range: 1/4"-20 through 7/8"-9. Material: Steel Function: Designed for use with B2500 spot insert. Finish: Plain or Electro-Galvanized. Order By: Part number and size. 11/4" (31.7) 11/4" (31.7) 5/16" (7.9) A Part No. N2500-1/4 N2500-3/8 N2500-1/2 N2500-5/8 N2500-3/4 N2500-7/8 Tap Size A 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 Approx. Wt./100 Lbs. (kg) 14 (6.3) 13 (5.9) 12 (5.4) 11 (5.0) 11 (5.0) 10 (4.5) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 212 B-Line series Pipe Hangers & Supports Concrete Inserts B3014 - Malleable Iron Insert Material: Malleable Iron Function: Designed to be embedded in concrete to attach 3/8"-16 to 7/8"-9 hanger rods. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the B3014N nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. Approvals: Underwriters Laboratories Listed when used with B3014N Insert Nut. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 18 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 18. Weight: Approx. Wt./100 - 166 Lbs. (75.3kg) Finish: Plain or Electro-Galvanized. Order By: Part number and finish. (Order B3014N nuts separately). Design Load: Design Loads based on B3014N malleable iron insert nut below. Note: Before installation ensure that concrete is sufficient to carry the load. 2" (50.8) 33/8" (85.7) 13/16" (20.6) 21/4" (57.1) 31/4" (82.5) Horizontal Adjustment: For 3/8"-16, 1/2"-13, 5/8"-11 rods - Adjustment is 13/4" (44.4) For 3/4"-10, 7/8"-9 rods - Adjustment is 13/16" (30.2) Concrete Inserts B3014N - Malleable Iron Insert Nut Size Range: 3/8"-20 through 7/8"-9. Material: Malleable Iron Standard Finish: Plain or Electro-Galvanized Service: Designed for use with the B3014 malleable iron insert shown above. Ordering: Part number and finish. 11/4" (31.7) 17/8" (47.6) 1/2" (12.7) For 3/8"-16 thru 5/8"-11 Tap Sizes 'A' 17/8" (47.6) 15/8" (41.3) Part No. B3014N-3/8 B3014N-1/2 B3014N-5/8 B3014N-3/4 B3014N-7/8 Tap Size 'A' 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 UL Max. Pipe Size 4" 8" 10" 10" 10" * When used with B3014 Malleable Iron Insert. Design Load* Lbs. (kN) 730 (3.25) 1350 (6.00) 1400 (6.23) 1400 (6.23) 1400 (6.23) Approx. Wt./100 Lbs. (kg) 22 (10.0) 22 (10.0) 20 (9.1) 29 (13.1) 29 (13.1) 1/2" (12.7) For 3/4"-10 & 7/8"-9 Tap Size 'A' All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 213 Eaton Concrete Inserts Concrete Inserts B2501 - Light Duty Spot Insert - Hanger Application Size Range: 3/8"-16 & 1/2"-13 rod Material: Steel Standard Finish: Electro-Plated Approvals: 3/8" & 12" rod sizes are Underwriters Laboratories listed in the USA (UL) and Canada (cUL). Service: Designed to be embedded in concrete for attachment of 3/8"-16 & 1/2"-13 hanger rods. Ordering: Specify part number and size. How to Install: Locate and nail to form. Pour concrete and strip forms when set. Remove color coded plug, install rod and lock with jam nut. Note: Design load is based off of rod sizes. Before installation ensure that concrete is sufficient to carry the load. B2501 - Data Part No. B2501-3/8 B2501-1/2 Rod Size 3/8"-16 1/2"-13 UL Listed Up to 4" IPS Up to 8" IPS Approx. Wt./C Lbs. (kg) 22 (10.0) 26 (11.8) B2505 thru B2508 - Spot Insert Material: Steel (Stainless steel available on B2505 only) Standard Finish: Plain or Pre-Galvanized Function: Designed to be embedded in concrete to attach 1/4"-20 to 7/8"-9 hanger rods. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the channel nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. Approvals: Underwriters Laboratories Listed. Conforms to 25/8" Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, (66.7) Type 18. Order By: Part number and finish. When supporting 10" (254mm) pipe, order B2505 Insert with 5/8"-11 channel nuts. Note: For appropriate channel nut selection, see page 18. Before installation ensure that concrete is sufficient to carry the load. Channel Part No. Size B2505 B22 B2506 B32 B2508 B52 End Cap Part No. B3322 B3332 B3352 Design Load Lbs. (kN) 1200 (5.34) 1000 (4.45) 1000 (4.45) Max. Pipe Size Approx. Wt./100 in. (mm) Lbs. (kg) 10" (250) 96 (43.5) 8" (200) 88 (39.9) 8" (200) 69 (31.3) Anchor Bolt ASTM A307 Rod Coupling Mounting Hole for Securing to Form End Caps Channel Size 51/16" (128.6) Styrofoam Filled B2506 shown Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 214 B-Line series Pipe Hangers & Supports Concrete Inserts B2503 - Heavy Duty Spot Insert Material: Steel Standard Finish: Electro-Galvanized Function: Designed to be embedded in concrete where heavy loads are required in curtain wall applications. Styrofoam end caps prevent concrete seepage into the channel. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the channel nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. Approvals: Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 18. Design Load: 5000 Lbs. (22.2kN). Loading based on two N225 channel nuts spaced 3" (76.2mm) on center and a minimum of 2" (50.8mm) from the end of the insert. Weight: Approx. Wt./100 - 42 Lbs. (19.0kg) Order By: Part number and finish. Channel nuts are sold separately, see page 18 for appropriate selection. Concrete Inserts 2" 5/32" (4.0) (50.8) Dia. Nail Holes 12" (304.8) 8" (203.2) Styrofoam End Caps 51/2" (139.7) 15/8" (41.3) 15/8" (41.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 215 Eaton Concrete Inserts Concrete Inserts B22I - Continuous Concrete Insert Material: Steel Standard Finish: Plain, Pre-Galvanized, or Hot-Dip Galvanized Function: Concrete insert should be secured to forms on 16" (406.4mm) to 24" (609.6mm) intervals. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the channel nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. Approvals: Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 18. Design Load: 2000 Lbs. (8.89kN) per foot for B22-I-12 thru B22-I-240 in 3000 psi concrete. Loads concentrated within the last 2" (50.8mm) of inserts 8" (203.2mm) and longer should not exceed 1000 Lbs. (4.45kN). Order By: Part number and finish. Channel nuts are sold separately, see page 18 for appropriate selection. To order inserts without styrofoam and end caps add insert only to the part number. 25/8" 15/8" (66.7) (41.3) B3322 End Cap 4" (101.6) 11/2" (38.1) 15/8" (41.3) Styrofoam Filler B22-I-3 thru B22-I-8 3/4" (19.0) 15/8" (41.3) .188" (4.8) Knockouts 31/8" (79.4) 11/16" (17.4) for Nailing Inserts To Forms 15/8" (41.3) B22-I-12 thru B22-I-240 Part No. B22-I-3 B22-I-4 B22-I-6 B22-I-8 Part No. B22-I-12 B22-I-16 B22-I-20 B22-I-24 B22-I-32 B22-I-36 B22-I-40 B22-I-48 B22-I-60 B22-I-72 B22-I-84 B22-I-96 B22-I-108 B22-I-120 B22-I-144 B22-I-168 B22-I-192 B22-I-216 B22-I-240 Length in. (mm) 3" (76) 4" (101) 6" (152) 8" (203) Approx. Wt./100 Lbs. (kg) 72 (32.6) 88 (39.9) 120 (54.4) 152 (68.9) Design Load Lbs. (kN) 500 (2.22) 800 (3.56) 1000 (4.45) 1200 (5.34) Length in. (mm) 12" (305) 16" (406) 20" (508) 24" (609) 32" (813) 36" (914) 40" (1016) 48" (1219) 60" (1524) 72" (1829) 84" (2133) 96" (2438) 108" (2743) 120" (3048) 144" (3657) 168" (4267) 192" (4877) 216" (5486) 240" (6096) Approx. Wt./100 Lbs. (kg) 224 (101.6) 289 (131.1) 353 (160.1) 420 (190.5) 553 (250.8) 620 (281.2) 686 (311.1) 820 (371.9) 1018 (461.7) 1218 (552.5) 1417 (642.7) 1616 (733.0) 1816 (823.7) 2016 (914.4) 2416 (1095.9) 2816 (1277.3) 3216 (1458.7) 3616 (1640.2) 4016 (1821.6) Styrofoam Filler Material: 12 Gauge (2.6) B205 End Cap Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 216 B-Line series Pipe Hangers & Supports Concrete Inserts Concrete Inserts B32I - Continuous Concrete Insert Material: Steel Standard Finish: Plain, Pre-Galvanized, or Hot-Dip Galvanized Function: Concrete insert should be secured to forms on 16" (406.4mm) to 24" (609.6mm) intervals. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the channel nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. Approvals: Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 18. Design Load: 2000 Lbs. (8.89kN) per foot for B32-I-12 thru B32-I-240 in 3000 psi concrete. Loads concentrated within the last 2" (50.8mm) of inserts 8" (203.2mm) and longer should not exceed 1000 Lbs. (4.45kN). Order By: Part number and finish. Channel nuts are sold separately, see page 18 for appropriate selection. To order inserts without styrofoam and end caps add insert only to the part number. 27/8" (73.03) Part No. B32-I-3 B32-I-4 B32-I-6 B32-I-8 Part No. B32-I-12 B32-I-16 B32-I-20 B32-I-24 B32-I-32 B32-I-36 B32-I-40 B32-I-48 B32-I-60 B32-I-72 B32-I-84 B32-I-96 B32-I-108 B32-I-120 B32-I-144 B32-I-168 B32-I-192 B32-I-216 B32-I-240 Length in. (mm) 3" (76) 4" (101) 6" (152) 8" (203) Approx. Wt./100 Lbs. (kg) 65 (29.5) 80 (36.3) 108 (49.0) 137 (62.1) Design Load Lbs. (kN) 500 (2.22) 800 (3.56) 1000 (4.45) 1200 (5.34) Length in. (mm) 12" (305) 16" (406) 20" (508) 24" (609) 32" (813) 36" (914) 40" (1016) 48" (1219) 60" (1524) 72" (1829) 84" (2133) 96" (2438) 108" (2743) 120" (3048) 144" (3657) 168" (4267) 192" (4877) 216" (5486) 240" (6096) Approx. Wt./100 Lbs. (kg) 202 (91.6) 262 (118.8) 316 (143.3) 376 (170.5) 496 (225.0) 556 (252.2) 616 (279.4) 736 (333.8) 915 (415.0) 1095 (496.7) 1274 (577.9) 1453 (659.0) 1633 (740.7) 1813 (822.3) 2173 (985.6) 2533 (1148.9) 2893 (1312.2) 3253 (1475.5) 3613 (1638.8) 25/8" (66.7) 15/8" (41.3) B3332 End Cap 13/8" (34.9) Styrofoam Filler B32-I-3 thru B32-I-8 4" (101.6) 11/2" (38.1) 3/4" (19.0) 15/8" (41.3) 11/16" (17.4) .188" (4.8) Knockouts for Nailing Inserts To Forms 13/8" (34.9) B32-I-12 thru B32-I-240 Material: 12 Gauge (2.6) Styrofoam Filler B206 End Cap All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 217 Eaton Concrete Inserts Concrete Inserts B52I - Continuous Concrete Insert Material: Steel Standard Finish: Plain, Pre-Galvanized, or Hot-Dip Galvanized Function: Concrete insert should be secured to forms on 16" (406.4mm) to 24" (609.6mm) intervals. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the channel nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. Approvals: Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 18. Design Load: 1500 Lbs. (6.67kN) per foot for B52-I-12 thru B52-I-240 in 3000 psi concrete. Loads concentrated within the last 2" (50.8mm) of inserts 8" (203.2mm) and longer should not exceed 750 Lbs. (3.33kN). Order By: Part number and finish. Channel nuts are sold separately, see page 18 for appropriate selection. To order inserts without styrofoam and end caps add insert only to the part number. 25/16" (58.7) Part No. B52-I-3 B52-I-4 B52-I-6 B52-I-8 Part No. B52-I-12 B52-I-16 B52-I-20 B52-I-24 B52-I-32 B52-I-36 B52-I-40 B52-I-48 B52-I-60 B52-I-72 B52-I-84 B52-I-96 B52-I-108 B52-I-120 B52-I-144 B52-I-168 B52-I-192 B52-I-216 B52-I-240 Length in. (mm) 3" (76) 4" (101) 6" (152) 8" (203) Approx. Wt./100 Lbs. (kg) 53 (24.0) 63 (28.6) 85 (38.5) 106 (48.1) Design Load Lbs. (kN) 400 (1.78) 500 (2.22) 750 (3.33) 1000 (4.45) Length in. (mm) 12" (305) 16" (406) 20" (508) 24" (609) 32" (813) 36" (914) 40" (1016) 48" (1219) 60" (1524) 72" (1829) 84" (2133) 96" (2438) 108" (2743) 120" (3048) 144" (3657) 168" (4267) 192" (4877) 216" (5486) 240" (6096) Approx. Wt./100 Lbs. (kg) 157 (71.2) 202 (91.6) 237 (107.5) 282 (127.9) 373 (169.2) 419 (190.0) 464 (210.4) 556 (252.2) 692 (313.9) 829 (376.0) 965 (437.7) 1107 (502.1) 1237 (561.1) 1374 (623.2) 1648 (747.5) 1922 (871.8) 2196 (996.1) 2470 (1120.4) 2744 (1244.6) 29/16" (65.1) 15/8" (41.3) B3352 End Cap 13/16" (20.6) Styrofoam Filler B52-I-3 thru B52-I-8 4" (101.6) 11/2" (38.1) 3/4" (19.0) 15/8" (41.3) 11/16" (17.4) .188" (4.8) Knockouts for Nailing Inserts To Forms 13/16" (20.6) B52-I-12 thru B52-I-240 Styrofoam Filler Material: 12 Gauge (2.6) B220 End Cap Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 218 B-Line series Pipe Hangers & Supports BD40 - Pipe Sleeve Fastener Material: Steel Function: Designed to attach pipe sleeves to wall or floor forms before concrete pours. Standard Finish: Zinc Phosphate Order By: Part number and finish. Concrete Inserts Part No. BD40 Sleeve Diameter All Diameters 2" (50.8mm) to 6" (152.4mm) Wall Thickness 5/16" (7.9mm) and under Schedule 40 Pipe Approx. Wt./100 Lbs. (kg) 1.5 (.68) BE-5-8 and BE-9-12 - Pipe Sleeve Fastener Material: Steel Function: Designed to attach pipe sleeves to wall or floor forms before concrete pours. Standard Finish: Zinc Phosphate Order By: Part number and finish. Concrete Inserts Part No. BE-5-8 BE-9-12 Sleeve Diameter in. (mm) 6" (152.4) 8" to 10" (203.2 to 254.0) 9" to 14" (228.6 to 355.6) Wall Thickness Schedule 80 Pipe Schedule 40 Pipe Schedule 80 Pipe Approx. Wt./100 Lbs. (kg) 3.5 (1.6) 4.0 (1.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 219 Eaton Brackets Brackets Brackets offered in this section are designed for support of pipe or hanger rod attachments. Brackets offer a convenient means of supporting pipe from a vertical surface. Materials Carbon Steel material is mig-welded into bracket assemblies. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREENTM and other special coatings are available upon request. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 220 B-Line series Pipe Hangers & Supports B3068 - Light Duty Welded Bracket Material: Steel Function: Recommended for suspending pipe outward from mounting surface. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 32 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 31. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number, hole size `H', and finish Brackets 11/2" (38.1) H B C A H Dia. Specify 9/16" Dia. (14.3) 2 Holes Brackets Part No. B3068-1 B3068-2 B3068-3 A in. (mm) 9" (228.6) 13" (330.2) 19" (482.6) B in. (mm) 8" (203.2) 12" (304.8) 18" (457.2) C in. (mm) 61/2" (165.1) 101/2" (266.7) 161/2" (419.1) H Dia. in. (mm) Specify (Specify) Specify (Specify) Specify (Specify) Design Load Lbs. (kN) 750 (3.33) 750 (3.33) 750 (3.33) Approx. Wt./100 Lbs. (kg) 360 (163.3) 582 (264.0) 860 (390.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 221 Eaton Brackets B3064 - Adjustable Strut Bracket Material: Steel Function: Designed for supporting pipe from walls or structures where lateral adjustment is required. Standard Finish: Plain or Electro-Galvanized Order By: Part number and finish. 11/4" (31.7) 3/8" Dia. (9.5) 9/16" Dia. (14.3) 2 Holes B A 45o 11/4" (31.7) 2" (50.8) B22 Channel 15/8" (41.2) B32 Channel Part No. B3064-1 B3064-2 B3064-3 A in. (mm) 15" (381.0) 21" (533.4) 27" (685.8) B in. (mm) 12" (304.8) 18" (457.2) 24" (609.6) Design Load Lbs. (kN) 1200 (5.34) 800 (3.56) 600 (2.67) Approx. Wt./100 Lbs. (kg) 660 (299.4) 1004 (455.4) 1346 (610.5) Brackets Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 222 B-Line series Pipe Hangers & Supports B3065 - Welded Bracket - Light Duty Max. Recommended Load: 750 lbs. (3.33kN) Material: Steel Function: Recommended for supporting pipe on top or hanging through support bracket outward from mounting surface. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 32 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 31. Finish: Plain or Electro-Galvanized. Note: Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By: Part number and finish B C A 1" (25.4) H 2 Holes Brackets Brackets Part No. B3065-1 B3065-2 B3065-3 Mtg. Hole H in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) A in. (mm) 13" (330.2) 17" (431.8) 23" (584.2) B in. (mm) 9" (228.6) 13" (330.2) 19" (482.6) C in. (mm) 111/2" (292.1) 151/2" (393.7) 211/2" (546.1) Part No. B3065-1 B3065-2 B3065-3 Design Load Lbs. (kN) 750 (3.33) 750 (3.33) 750 (3.33) Approx. Wt./100 Lbs. (kg) 571 (259.0) 769 (348.8) 1057 (479.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 223 Eaton Brackets Figure B3066 - Welded Bracket - Medium Duty Max. Recommended Load: 1500 lbs. (6.67kN) Material: Steel Function: Recommended for supporting pipe on top or hanging through support bracket outward from mounting surface. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 33 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 32. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish B C A 1" (25.4) H 2 Holes Brackets Part No. B3066-0 B3066-1 B3066-2 Mtg. Hole H in. (mm) 13/16" (20.6) 13/16" (20.6) 13/16" (20.6) A in. (mm) 18" (457.2) 24" (609.6) 30" (762.0) B in. (mm) 12" (304.8) 18" (457.2) 24" (609.6) C in. (mm) 151/2" (393.7) 211/2" (546.1) 271/2" (698.5) Part No. B3066-0 B3066-1 B3066-2 Design Load Lbs. (kN) 1500 (6.67) 1500 (6.67) 1500 (6.67) Approx. Wt./100 Lbs. (kg) 1577 (715.3) 2578 (1169.4) 4446 (2016.7) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 224 B-Line series Pipe Hangers & Supports B3067 - Welded Bracket - Heavy Duty Max. Recommended Load: 3000 lbs. (13.34kN) Material: Steel Function: Recommended for supporting pipe on top or hanging through support bracket outward from mounting surface. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 33 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 33. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish Brackets B D 1" (25.4) C A H 3 Holes Only one hole in top for B3067-0 Brackets Part No. B3067-0 B3067-1 B3067-2 B3067-3 B3067-4 B3067-5 ** One Hole Mtg. Hole H in. (mm) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) 11/8" (28.6) A in. (mm) 18" (457.2) 24" (609.6) 30" (762.0) 36" (914.4) 42" (1066.8) 50" (1270.0) B in. (mm) 12" (304.8) 18" (457.2) 24" (609.6) 30" (762.0) 36" (914.4) 42" (1066.8) Part No. B3067-0 B3067-1 B3067-2 B3067-3 B3067-4 B3067-5 Design Load Lbs. (kN) 3000 (13.34) 3000 (13.34) 3000 (13.34) 3000 (13.34) 3000 (13.34) 3000 (13.34) Approx. Wt./100 Lbs. (kg) 2195 (995.6) 4398 (1994.9) 6294 (2854.9) 7196 (3264.1) 13197 (5986.2) 15795 (7164.6) C in. (mm) 151/4" (387.3) 211/4" (539.7) 271/4" (692.1) 33" (838.2) 39" (990.6) 46" (1168.4) D in. (mm) ** ** 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 31/2" (88.9) 31/2" (88.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 225 Eaton Brackets B3069W - Welded Knee Bracket L Size Range: 1/2" (15mm) thru 8" (200mm) pipe Material: Steel Function: Recommended for suspending pipe outward from mounting surface. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Note: Maximum "L" dimension 16" (406.4mm). Order By: Part number, pipe size, (**) "L" dimension and finish Part No. B3069W-1/2-** B3069W-3/4-** B3069W-1-** B3069W-11/4-** B3069W-11/2-** B3069W-2-** B3069W-21/2-** B3069W-3-** B3069W-31/2-** B3069W-4-** B3069W-5-** B3069W-6-** B3069W-8-** Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Hole Size H in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) 11/16" (17.5) 11/16" (17.5) 11/16" (17.5) Max. Rec. Load Lbs. (kN) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) 1000 (4.45) H ** Length to be specified as shown on the drawing. Brackets B3069E - "O" Bracket L Size Range: 1/2" (15mm) thru 8" (200mm) pipe Material: Carbon Steel Function: Recommended for suspending pipe outward from mounting surface. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Note: Maximum "L" dimension 16" (406.4mm). Order By: Part number, pipe size, (**) "L" dimension and finish Part No. Pipe Size in. (mm) Hole Size H in. (mm) Max. Rec. Load Lbs. (kN) B3069E-1/2-** 1/2" (15) 9/16" (14.3) 450 (2.00) H B3069E-3/4-** 3/4" (20) 9/16" (14.3) 450 (2.00) B3069E-1-** 1" (25) 9/16" (14.3) 450 (2.00) B3069E-11/4-** 11/4" (32) 9/16" (14.3) 450 (2.00) B3069E-11/2-** 11/2" (40) 9/16" (14.3) 450 (2.00) B3069E-2-** 2" (50) 9/16" (14.3) 450 (2.00) B3069E-21/2-** 21/2" (65) 9/16" (14.3) 450 (2.00) B3069E-3-** 3" (80) 9/16" (14.3) 450 (2.00) B3069E-31/2-** 31/2" (90) 9/16" (14.3) 450 (2.00) B3069E-4-** 4" (100) 11/16" (17.5) 450 (2.00) B3069E-5-** 5" (125) 11/16" (17.5) 450 (2.00) B3069E-6-** 6" (150) 11/16" (17.5) 450 (2.00) B3069E-8-** 8" (200) 11/16" (17.5) 450 (2.00) ** Length to be specified as shown on the drawing. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 226 B-Line series Pipe Hangers & Supports Brackets Brackets B-Line series Pipe Hangers & Supports 227 Eaton Upper Attachments Upper Attachments Upper attachments offered in this section are designed to suspend hanger rods from beams, concrete, and other structural surfaces by bolting or welding. Materials Carbon Steel and Malleable Iron are used in the manufacturing of upper attachments and provide the high strength properties required. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, DURA GREENTM and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, copper plated, or in stainless steel. Approvals (as noted) Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 228 B-Line series Pipe Hangers & Supports B3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated Size Range: 3/8"-16 & 1/2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard Finish: Plain or Electro-Galvanized B3199RCT is DURA-COPPERTM coated Function: Designed for attaching a hanger or support rod to beams, ceilings, or walls. Order By: Part number and finish. Upper Attachments B Overall Height For 1/4" Flat Head Machine Screws or Wood Screws 27/8" (73.0) 2" (50.8) B 13/8" (34.9) A (Rod or Pipe Thread) Hanger Rod or Pipe Not Included B3199RCT Part No. B3199R-3/8 B3199R-1/2 B3199RCT-3/8 B3199RCT-1/2 Thread Size A 3/8"-16 1/2"-13 B3199R B in. (mm) 7/16" (11.1) 1/2" (12.7) Design Load Lbs. (kN) 180 (.80) 180 (.80) Approx. Wt./100 Lbs. (kg) 13 (5.9) 17 (7.7) TOLCOTM Fig. 78 - All Steel Ceiling Plate Size Range: 3/8"-16 rod Material: Pre-Galvanized Steel Function: Attachment to wood beams, ceilings, metal decks or walls. Can also be welded to steel beams. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL). Additionally, UL has listed the Fig. 78 with fasteners as shown in the table below. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish US Patent #5,702,077 C B A E D (2 Holes) Upper Attachments UL Listed Fastener Table Pipe Size Qty Fastener Type 1/2" - 2" 2 #14 x 11/4" A-point hex-washer-head sheet metal screw 21/2" - 4" 2 1/4" x 11/2" wood screws* 1/2" - 2" 2 1/4" x 1" tek screws 1/2" - 2" 2 #14 x 11/4" A-point hex-washer-head sheet metal screw 1/2" - 2" 2 #14 x 2" A-point-hex-washer-head sheet metal screw * No pre-drilling Material Wood Wood Metal (18 gauge) Wood Wood thru 5/8" gyp board Part No. 78-3/8 Pipe Size in. (mm) 1/2" - 2" (15 - 60) A in. (mm) 3" (76.2) B in. (mm) 21/8" (54.0) C in. (mm) 11/8" (28.6) Hole Dia. D in. (mm) 5/16" (7.9) Thread Size E 3/8"-16 Design Load Lbs. (kN) 150 (0.67) Approx. Wt./100 Lbs. (kg) 15 (6.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 229 Eaton Upper Attachments B3060L - Light Duty Angle Clip Size Range: 3/8"-16 rod Material: Steel (Stainless steel available) Function: Designed for attaching 3/8"-16 hanger rod to the side of beams or walls. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 34. Finish: Plain or Electro-Galvanized Order By: number and finish. Design Load: 300 Lbs. (1.33kN) Weight: Approx. Wt./100 - 15 Lbs. (6.8 kg) 9/32" Dia (7.1) 2 Holes 17/8" (47.6) 15/16" (33.3) 7 Ga. (4.5) 13/16" (20.6) 7/16" Dia (11.1) 2 Holes 11/4" (31.7) 1/2" (12.7) B3070 - Reversible Angle Clip Size Range: 3/8"-16 and 1/2"-13 rod, 1/2" (15mm) thru 31/2" (90mm) pipe Material: Steel Function: Designed for attaching hanger rod to the side of beams or walls. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 34. Finish: Plain or Electro-Galvanized Order By: number and finish. Design Load: 500 Lbs. (2.22 kN) when installed in either direction. Weight: Approx. Wt./100 - 49 Lbs. (22.2 kg) B H2 H3 4 Holes H1 A C A Upper Attachments Part No. B3070-3/8x1/2 B3070-1/2x1/2 Rod Size 3/8"-16 x 1/2"-13 1/2"-13 x 1/2"-13 A in. (mm) 2" (50.8) 2" (50.8) B in. (mm) 13/16" (20.6) 3/4" (19.0) C in. (mm) 2" (50.8) 2" (50.8) Hole 1 in. (mm) 9/16" (14.3) 9/16" (14.3) Hole 2 in. (mm) 7/16" (11.1) 9/16" (14.3) Hole 3 in. (mm) 5/16" (7.9) 5/16" (7.9) Max. Rec. Load Approx. Wt./100 Lbs. (kN) Lbs. (kg) 700 (3.11) 35 (15.9) 700 (3.11) 34 (15.4) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 230 B-Line series Pipe Hangers & Supports B3060 - Side Beam Angle Clip Size Range: 3/8"-16 and 7/8"-9 rod Material: Steel (Stainless steel available) Function: Designed for attaching a hanger rod to the side of beams or walls. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 34. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Upper Attachments A Hole Size C T B D D B Part No. B3060-3/8 B3060-1/2 B3060-1/2 B3060-3/4 B3060-7/8 Hole Size A in. (mm) 7/16" (11.1) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) B in. (mm) 23/16" (55.6) 23/16" (55.6) 23/16" (55.6) 3" (76.2) 4" (101.6) C in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 3" (76.2) 4" (101.6) D in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 13/4" (44.4) 21/2" (63.5) T in. (mm) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 3/8" (9.5) 3/8" (9.5) Design Load Lbs. (kN) 305 (1.35) 565 (2.51) 909 (4.02) 1355 (6.03) 1870 (8.32) Approx. Wt./100 Lbs. (kg) 53 (24.0) 51 (23.1) 48 (21.8) 169 (74.8) 312 (141.5) TOLCOTM Fig. 51NFPA - Side Beam Bracket for NFPA Rod & Fastener Sizing Size Range: 3/8"-16 thru 1/2"-13 rod, 1/2" (15mm) thru 8" pipe (200mm) Material: Steel Function: Recommended for attaching hanger rod to side of beams or walls. Designed to accommodate current rod schedule and fastener requirements per National Fire Protection Association (NFPA) Pamphlet 13. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering approved. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish Hole 1 A B Hole 2 B A C Upper Attachments Part No. 51NFPA-3/8x3/8 51NFPA-3/8x1/2 51NFPA-1/2x1/2 51NFPA-1/2x5/8 Pipe Size in. (mm) 1/2" - 2" (15 - 60) 21/2" - 4" (65 - 100) 5" - 6" (125 - 150) 8" (200) Rod Size 3/8"-16 3/8"-16 1/2"-13 1/2"-13 A in. (mm) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) B in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) C in. (mm) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) Hole 1 in. (mm) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) Hole 2 in. (mm) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) Part No. 51NFPA-3/8x3/8 51NFPA-3/8x1/2 51NFPA-1/2x1/2 51NFPA-1/2x5/8 Design Load Lbs. (kN) 700 (3.11) 700 (3.11) 1250 (5.56) 1250 (5.56) Approx. Wt./100 Lbs. (kg) 35 (15.9) 34 (15.4) 71 (32.2) 70 (31.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 231 Eaton Upper Attachments TOLCOTM Fig. 50 - Side Beam Bracket for NFPA Rod & Fastener Sizing Size Range: 3/8"-16 thru 7/8"-9 rod Material: Steel Function: Recommended for attaching hanger rod to side of beams or walls. Approvals: Factory Mutual Engineering approved (FM). Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish H A B H B A C Part No. 50-3/8 50-1/2 50-5/8 50-3/4 50-7/8 Rod Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 A in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) B in. (mm) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) C in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) Hole Size H in. (mm) 7/16" (11.1) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) Max. Rec. Load Lbs. (kN) 700 (3.22) 700 (3.22) 700 (3.22) 1250 (5.56) 1250 (5.56) Approx. Wt./100 Lbs. (kg) 35 (15.9) 35 (15.9) 32 (14.5) 110 (49.9) 100 (45.3) B3061 - Angle Bracket Material: Steel Function: -- Recommended for supporting pipe at various distances from wall or column. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Part No. Size A in. (mm) B3061-1 1 3" (76.2) B3061-2 2 4" (101.6) B3061-3 3 3" (76.2) B3061-4 4 4" (101.6) B in. (mm) 2" (50.8) 3" (76.1) 2" (50.8) 3" (76.1) Hole Size in. (mm) 7/16" (11.1) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) A B Max. Rec. Load Approx. Wt./100 Lbs. (kN) Lbs. (kg) 180 (0.80) 180 (0.80) 390 (1.73) 390 (1.73) 46 (20.8) 65 (29.5) 85 (38.5) 115 (52.1) TOLCOTM Fig. 56 - Tapped Side Beam Connector (Stainless Steel) Size Range: 1/2" (15mm) thru 4" (100mm) pipe (3/8"-16 rod) Material: Stainless Steel Function: Recommended for attaching hanger rod to steel or wood beams. Tapped hole allows easy adjustment of hanger rod. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering approved for 1/2" (15mm) thru 4" (100mm) pipe. Weight: Approx. Wt./100 - 20.0 Lbs. (9.1kg) Order By: Part number Note: Available only in Stainless Steel materials. Per NFPA 13: 1/2" (15mm) thru 2" (50mm) pipe use 3/8"-16 fastener; 21/2" (65mm) thru 4" (100mm) pipe, use 1/2"-13 fastener. 25/8" (66.7) 11/4" (31.7) 7/16" (11.1) 9/16" (14.3) 3/8"-16 1" (25.4) Upper Attachments Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 232 B-Line series Pipe Hangers & Supports Upper Attachments TOLCOTM Fig. 58 - Threaded Side Beam Bracket Size Range: 3/8"-16 rod, pipe sizes 1/2" (15mm) thru 4" (100mm) B Material: Pre-Galvanized Steel Function: Practical and economical bracket used to support piping from wood, concrete or steel beams. Features: Unique design allows rod to be easily threaded into bracket. Offset design A permits unlimited rod adjustment. Center mounting hole will accept 3/8" and 1/2" fastener bolts. Per NFPA 13: 1/2" (15mm) thru 2" (50mm) pipe requires 3/8" fastener, 21/2" (65mm) thru 4" (100mm) pipe requires 1/2" fastener.* Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL), and Factory Mutual Engineering approved thru 4" (100mm) pipe. C Finish: Pre-Galvanized Order By: Part number and finish *Note: Additionally UL has listed the Fig. 58 with fasteners as shown in table below. 2 - 1/4" x 2" Lag Bolts (No Pre-Drilling Up to 4" (100mm) pipe Per NFPA 1 - 3/8" or 1/2" Lag Bolts Up to 4" (100mm) pipe 2 - #16 x 2" Drive Screws 1/2" (15mm) - 4" (100mm) pipe Upper Attachments Pipe Size Qty 2" 2 2" 1 21/2" - 4" 1 31/2" 2 4" 2 4" 2 4" 2 ** No pre-drilling UL Listed Fastener Table Fastener Type #16 x 2" Drive screws 3/8" Lag bolt 1/2" Lag bolt 1/4" x 11/2" Lag bolts 1/4" x 2" Lag bolts ** #14 x 1" or 1/4" x 1" Tek type screws #14 x 1" or 1/4" x 1" Tek type screws Material Wood Wood Wood Wood Wood Metal (15 gauge) Metal (16 gauge) 2 - #14 x 1" or 1/4" x 1" Tek Type Screws Into Min. 16 Gauge Steel Up to 4" (100mm) pipe Bolt & Hex Nut Up to 4" (100mm) pipe Part No. 58 Pipe Size in. (mm) 1/2" - 4" (15 - 100) Rod Size 3/8"-16 *** With Safety Factor of 5. A in. (mm) 23/4" (69.8) B in. (mm) 11/2" (38.1) C in. (mm) 11/8" (28.6) Max. Rec. Load Lbs. (kN) 300*** (1.33) Approx. Wt./100 Lbs. (kg) 14 (6.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 233 Eaton Upper Attachments TOLCOTM Fig. 75 - Swivel Attachment Size Range: -- 3/8"-16 Rod Attachment Material: Steel Function: Three recommended applications for this product: � May be used as a Branch Line Restraint for structural attachment to anchor bolt, beam clamp, etc. � May be used as an upper attachment with short hanger rod to omit seismic bracing. � May be used in a pitched or sloped roof application, to meet requirements of NFPA 13 (2010) 9.1.2.6. Approvals: Underwriters Laboratories Listed in the USA (UL) and Canada (cUL) to support up to 4" (100mm) pipe. Finish: Electro-Galvanized Weight: Approx. Wt./100 - 13.3 Lbs. (6.0kg) Order By: Part number Patent: #7,887,248 Fig. 200 "Trimline" Adjustable Band Hanger Fig. 78 All Steel Ceiling Plate Fig. 75 Swivel Attachment All Threaded Rod Fig. 25 Surge Restrainer May be used as a structural attachment component of a branch line restraint Fig. 75 Swivel Attachment All Threaded Rod B3100 Clevis Hanger May be used as a upper attachment with short hanger rod to omit seismic bracing Pitched Roof W-Beam Fig. 65 Reversible Beam Clamp Fig. 75 Swivel Attachment All Threaded Rod May be used with a pitched roof application, to meet requirements of NFPA 13 (2010) Sec. 9.1.2.5. Upper Attachments Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 234 B-Line series Pipe Hangers & Supports B3058 - Side Beam Connector Size Range: 3/8"-16 & 1/2"13 rods Material: Malleable Iron Function: Designed for attaching hanger rod to the side of beams or walls. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 34. Finish: Plain or Electro-Galvanized Order By: Part number and finish. Upper Attachments For #12 Flat Head Machine Screws or Wood Screws Tapped Hole A (Rod Size) Hanger Rod Not Included B C Part No. B3058-3/8 B3058-1/2 Rod Size A 3/8"-16 1/2"-13 B in. (mm) 23/8" (60.3) 23/4" (69.8) C in. (mm) 9/16" (14.3) 3/4" (19.0) Design Load Lbs. (kN) 250 (1.11) 480 (2.13) Approx. Wt./100 Lbs. (kg) 13 (5.9) 25 (11.3) B3062 - Side Beam Bracket Size Range: 3/8"-16 thru 5/8"-11 rods Material: Malleable Iron Function: Designed for attaching hanger rod to the side of beams or walls. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 35 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 34. Finish: Plain or Electro-Galvanized Order By: Part number and finish. T B Dia. F A (Rod Size) Hanger Rod C Not Included D E Part No. B3062-3/8 B3062-1/2 B3062-5/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 For Nominal Pipe Sizes in. (mm) 3/4"-2" (20-50) 21/2"-31/2" (65-95) 4"-5" (100-125) Design Load With Lag Screw With Bolt To Steel Approx. Wt./100 Lbs. (kN) Lbs. (kN) Lbs. (kg) 390 (1.73) 730 (3.25) 21 (9.5) 640 (2.84) 1350 (6.00) 44 (19.9) 760 (3.38) 2160 (9.71) 81 (36.7) Part No. B3062-3/8 B3062-1/2 B3062-5/8 B in. (mm) 7/16" (11.1) 9/16" (14.3) 3/4" (19.0) C in. (mm) 7/8" (22.2) 13/16" (30.2) 17/16" (36.5) D in. (mm) 13/8" (34.9) 113/16" (46.0) 23/16" (55.6) E in. (mm) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) F in. (mm) 17/16" (36.5) 17/8" (47.6) 21/4" (54.0) T in. (mm) 1/4" (6.3) 11/32" (8.7) 7/16" (11.1) Upper Attachments All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 235 Eaton Upper Attachments B3083 - Welded Beam Attachment B3083WO - Welded Beam Attachment Without Pin Size Range: 3/8"-16 thru 2"-41/2 rod Material: Steel (Stainless steel available) B Center of cross bolt to bottom of attachment. Function: Designed for attaching hanger rod to the bottom of C structural steel where heavy loads and large hanger rod sizes are required. Can be welded in place in either the upright or inverted Center of cross bolt to top of attachment. position. When using B3083WO, attach hanger rod to bolt or pin with a B3200 weldless eye nut or B3210 and B3211 series eye rods. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 22 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 22. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number (with or without hardware) and finish. B3083 Note: When ordering with hardware for sizes 3/8 thru 11/8, hex head cap screws and hex nuts will be supplied. For 11/4 thru 2, clevis pin and cotter pins will be supplied. Must be specified with or without hardware. A (Rod Size) Hanger Rod Not Included T x W Steel Size Bolt or Pin Size D Dia. Field weld where required. B C E Part No. B3083-3/8 B3083-1/2 B3083-5/8 B3083-3/4 B3083-7/8 B3083-1 B3083-11/8 B3083-11/4 B3083-11/2 B3083-13/4 B3083-2 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 Pin or Bolt Size in. (mm) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) 17/8" (47.6) 21/4" (57.1) Design Load 650� F (349�C) Lbs. (kN) 750�F (399�C) Lbs. (kN) 730 (3.25) 572 (2.54) 1350 (6.00) 1057 (4,70) 2160 (9.61) 1692 (7.52) 3230 (14.37) 2530 (11.25) 4480 (19.93) 3508 (15.60) 5900 (26.24) 4620 (20.55) 7450 (33.14) 5830 (25.93) 9500 (42.25) 7440 (33.09) 13800 (61.38) 10807 (48.07) 18600 (82.73) 14566 (64.79) 24600 (109.42) 19625 (87.29) B3083WO Approx. Wt./100 W/O Hardware Lbs. (kg) With Hardware Lbs. (kg) 89 (40.3) 110 (49.9) 87 (39.4) 123 (55.8) 84 (38.1) 140 (63.5) 173 (78.4) 268 (121.5) 234 (106.1) 376 (170.4) 394 (178.6) 596 (270.2) 402 (182.2) 680 (308.3) 734 (332.7) 955 (432.9) 1460 (661.8) 1746 (791.5) 2190 (992.7) 1817 (823.7) 2310 (1047.1) 2996 (1358.1) Part No. B3083-3/8 B3083-1/2 B3083-5/8 B3083-3/4 B3083-7/8 B3083-1 B3083-11/8 B3083-11/4 B3083-11/2 B3083-13/4 B3083-2 B in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) 5" (127.0) 5" (127.0) C in. (mm) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 11/8" (28.6) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 23/4" (69.8) 31/4" (82.5) Dia. D in. (mm) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 13/4" (44.4) 2" (50.8) 23/8" (60.3) E in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 2" (50.8) 2" (50.8) 23/4" (69.8) 3" (76.2) 31/2" (88.9) 33/4" (95.2) 33/4" (95.2) T xW in. (mm) 1/4" x 2" (6.3 x 50.8) 1/4" x 2" (6.3 x 50.8) 1/4" x 2" (6.3 x 50.8) 3/8" x 21/2" (9.5 x 63.5) 3/8" x 21/2" (9.5 x 63.5) 1/2" x 3" (12.7 x 76.2) 1/2" x 3" (12.7 x 76.2) 5/8" x 4" (15.9 x 101.6) 3/4" x 5" (19.0 x 127.0) 3/4" x 5" (19.0 x 127.0) 3/4" x 6" (19.0 x 152.4) Upper Attachments Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 236 B-Line series Pipe Hangers & Supports Upper Attachments B3080S - (Short) Structural Welding Lug B3080L - (Long) Structural Welding Lug Size Range: Short lug is available for use with 1/2"-13 thru 2"-41/2 rods; Long lug may be used with 1/2"-13 thru 2"-41/2 rod. Material: Steel Function: Designed for attachment to structural steel. Use with B3201 forged steel clevis. Approvals: Conforms to Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 57. H Finish: Plain or Electro-Galvanized Order By: Part number and finish. R W B3080S B3080L Part No. Short Long B3080S-1/2 B3080L-1/2 B3080S-5/8 B3080L-5/8 B3080S-3/4 B3080L-3/4 B3080S-7/8 B3080L-7/8 B3080S-1 B3080L-1 B3080S-11/8 B3080L-11/8 B3080S-11/4 B3080L-11/4 B3080S-11/2 B3080L-11/2 B3080S-13/4 B3080L-13/4 B3080S-2 B3080L-2 B3080S For Hanger 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 Pin or Bolt Size in. ( mm) 5/8" (15.9) 3/4" (19.0) 7/8" (22.0) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (38.1) 15/8" (41.3) 17/8" (47.6) 21/4" (57.1) Design Load Lbs. ( kN) 1350 (6.00) 2160 (9.61) 3230 (14.37) 4480 (19.93) 5900 (26.24) 7450 (33.14) 9500 (42.25) 13800 (61.38) 18600 (82.73) 24600 (109.42) Note: Must be field welded to structural steel. D Dia. T H R W B3080L Approx. Wt./100 Short Long Lbs. (kg) Lbs. (kg) 44 (19.9) 71 (32.2) 44 (19.9) 68 (30.8) 63 (28.6) 100 (45.3) 71 (32.2) 100 (45.3) 126 (57.1) 169 (76.6) 166 (75.3) 208 (94.3) 310 (140.6) 381 (172.8) 503 (228.1) 662 (300.3) 487 (220.9) 646 (293.0) 744 (337.5) 808 (366.5) D Dia. T Part No. Short Long B3080S-1/2 B3080S-5/8 B3080L-1/2 B3080L-5/8 B3080S-3/4 B3080S-7/8 B3080L-3/4 B3080L-7/8 B3080S-1 B3080L-1 B3080S-11/8 B3080L-11/8 B3080S-11/4 B3080S-11/2 B3080L-11/4 B3080L-11/2 B3080S-13/4 B3080L-13/4 B3080S-2 B3080L-2 Hole Dia. 'D' in. ( mm) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 13/8" (44.4) 2" (50.8) 23/8" (60.3) Short H Long in. ( mm) in. ( mm) 11/2" (38.1) 11/2" (38.1) 3" (76.2) 3" (76.2) 11/2" (38.1) 3" (76.2) 2" (50.8) 3" (76.2) 2" (50.8) 3" (76.2) 3" (76.2) 4" (101.6) 3" (76.2) 4" (101.6) 3" (76.2) 41/2" (114.3) 3" (76.2) 4" (101.6) 41/2" (114.3) 41/2" (114.3) R in. ( mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 21/2" (63.5) 3" (76.2) T in. ( mm) 1/4" (6.3) 1/4" (6.3) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) W in. ( mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 3" (76.2) 4" (101.6) 5" (127.0) 5" (127.0) 6" (152.4) Upper Attachments All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 237 Eaton Upper Attachments B3085 - Rod Attachment Concrete Plate Size Range: 3/8"-16 thru 2"-41/2 rod Material: Steel Function: Structural attachment to concrete ceiling where vertical attachment is desired. Attach hanger rod directly to support bracket. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Note: Design load is based off rod sizes. Before installation ensure that concrete and anchorage are sufficient to carry the load. CB G D F Dia. 4 Holes E AA B C See B3083 For Clevis Dimensions Rod Size Not Included Upper Attachments Part No. B3085-3/8 B3085-1/2 B3085-5/8 B3085-3/4 B3085-7/8 B3085-1 B3085-11/8 B3085-11/4 B3085-11/2 Rod Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 A in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) B in. (mm) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) C in. (mm) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) D in. (mm) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) Part No. B3085-3/8 B3085-1/2 B3085-5/8 B3085-3/4 B3085-7/8 B3085-1 B3085-11/8 B3085-11/4 B3085-11/2 E in. (mm) 27/8" (73.0) 27/8" (73.0) 27/8" (73.0) 31/8" (79.4) 41/4" (107.7) 41/2" (114.3) 43/4" (120.6) 5" (127.0) 61/2" (165.1) F in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 11/16" (`17.5) 11/16" (`17.5) 13/16" (`20.6) 15/16" (`23.8) 15/16" (`23.8) 11/8" (`28.6) G in. (mm) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 1" (25.4) Max. Rec. Load* Lbs. (kN) 730 (3.25) 1450 (6.00) 2160 (9.61) 3230 (14.37) 4480 (19.93) 5900 (26.24) 7450 (33.14) 9500 (42.25) 13800 (61.38) Approx. Wt./100 Lbs. (kg) 1145 (519.4) 1143 (518.4) 1490 (675.8) 1574 (713.9) 1635 (741.6) 3420 (1551.3) 3413 (1548.1) 3747 (1699.6) 5438 (2466.7) * Based on allowable stresses shown in the ANSI code for pressure piping. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 238 B-Line series Pipe Hangers & Supports B3086 - Clevis Concrete Plate Size Range: 3/8"-16 thru 2"-41/2 rod Material: Steel Function: Structural attachment to concrete ceiling where flexibility is desired. (Use with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod.) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish Upper Attachments AA C B BC G D F Dia. 4 Holes See B3083 E Bolt or Pin Size D H R S Upper Attachments Part No. B3086-3/8 B3086-1/2 B3086-5/8 B3086-3/4 B3086-7/8 B3086-1 B3086-11/8 B3086-11/4 B3086-11/2 For Hanger Rod Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 A in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) B in. (mm) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) C in. (mm) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) D in. (mm) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) E in. (mm) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) F in. (mm) 9/16" (14.3) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) 15/16" (23.8) 11/8" (28.6) Part No. B3086-3/8 B3086-1/2 B3086-5/8 B3086-3/4 B3086-7/8 B3086-1 B3086-11/8 B3086-11/4 B3086-11/2 G in. (mm) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 1" (25.4) H in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) 4" (101.6) R in. (mm) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 11/8" (28.6) 11/4" (31.7) 11/2" (38.1) 13/4" (44.4) 2" (50.8) 21/2" (63.5) * Based on allowable stresses shown in the ANSI code for pressure piping. S in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 2" (50.8) 2" (50.8) 23/4" (69.8) 3" (76.2) 31/2" (88.9) Max. Rec. Load* Lbs. (kN) 730 (3.25) 1350 (6.00) 2160 (9.61) 3230 (14.37) 4480 (19.93) 5900 (26.24) 7450 (33.14) 9500 (42.25) 13800 (61.38) Approx. Wt./100 Lbs. (kg) 1165 (528.4) 1178 (534.4) 1546 (701.2) 1673 (758.9) 1783 (808.7) 3636 (1649.3) 3708 (1681.9) 3986 (1808.0) 5816 (2638.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 239 Eaton Upper Attachments B3084 - Single Lug Concrete Plate Size Range: 1/2"-13 thru 2"-41/2 rod Material: Steel Function: Structural attachment to concrete ceiling. Use with B3201 bridge clevis to attach to center lug. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish AA C B B C D E G T H F Dia. 4 Holes R U Pin or Bolt Size W Upper Attachments Part No. B3084-1/2 B3084-5/8 B3084-3/4 B3084-7/8 B3084-1 B3084-11/8 B3084-11/4 B3084-11/2 For Hanger Rod Size 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 A in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) B in. (mm) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) 8" (203.2) C in. (mm) 10" (254.0) 10" (254.0) 10" (254.0) 10" (254.0) 12" (304.8) 12" (304.8) 12" (304.8) 12" (304.8) D in. (mm) 5" (127.0) 5" (127.0) 5" (127.0) 5" (127.0) 6" (152.4) 6" (152.4) 6" (152.4) 6" (152.4) E in. (mm) 47/8" (123.8) 47/8" (123.8) 413/16" (122.2) 413/16" (122.2) 53/4" (146.0) 53/4" (146.0) 511/16" (144.5) 55/8" (142.9) F in. (mm) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) 15/16" (23.8) 11/8" (28.6) G in. (mm) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 1" (25.4) Part No. B3084-1/2 B3084-5/8 B3084-3/4 B3084-7/8 B3084-1 B3084-11/8 B3084-11/4 B3084-11/2 H in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 2" (50.8) 3" (76.2) 3" (76.2) 3" (76.2) R in. (mm) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 21/2" (63.5) U in. (mm) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) T x W in. (mm) 1/4" x 21/2" (6.3 x 63.5) 1/4" x 21/2" (6.3 x 63.5) 3/8" x 21/2" (9.5 x 63.5) 3/8" x 21/2" (9.5 x 63.5) 1/2" x 3" (12.7 x 76.2) 1/2" x 3" (12.7 x 76.2) 5/8" x 4" (15.9 x 101.6) 3/4" x 5" (19.0 x 127.0) Max. Rec. Load* Lbs. (kN) 1350 (6.00) 2160 (9.61) 3230 (14.37) 4480 (19.93) 5900 (26.24) 7450 (33.14) 9500 (42.25) 13800 (61.38) Approx. Wt./100 Lbs. (kg) 1096 (497.1) 1447 (656.3) 1459 (661.8) 2166 (982.5) 3145 (1426.6) 3170 (1437.9) 4312 (1955.9) 4470 (2027.6) * Based on allowable stresses shown in the ANSI code for pressure piping. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 240 B-Line series Pipe Hangers & Supports B3082 - Adjustable Rod Beam Attachment Size Range: 3/8"-16 thru 7/8"-9 rod Material: Steel Function: Designed for attaching hanger rod to bottom flange of beam or ceilings allowing for vertical adjustment where required. Standard Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Upper Attachments BF D C F From top of hanger rod nut to top of attachment. A (Rod Size) Hanger Rod Not Included E Dia. Mounting Holes Upper Attachments Part No. B3082-3/8 B3082-1/2 B3082-5/8 B3082-3/4 B3082-7/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 B in. (mm) 23/4" (69.8) 31/8" (97.4) 31/8" (79.4) 311/16" (93.7) 33/4" (95.2) C in. (mm) 37/8" (98.4) 43/4" (120.6) 43/4" (120.6) 61/4" (158.7) 63/8" (161.9) D in. (mm) 47/8" (123.8) 6" (152.4) 6" (152.4) 73/4" (196.8) 81/4" (209.5) Part No. B3082-3/8 B3082-1/2 B3082-5/8 B3082-3/4 B3082-7/8 Dia. E in. (mm) 7/16" (11.1) 9/16" (14.3) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) Adjustment F in. (mm) 21/8" (54.0) 25/16" (58.7) 23/16" (55.6) 29/16" (65.1) 21/2" (63.5) Design Load Lbs. (kN) 810 (3.60) 1130 (5.02) 1810 (8.05) 2710 (12.05) 3770 (16.77) Approx.Wt./100 Lbs. (kg) 53 (24.0) 129 (58.5) 128 (58.0) 196 (88.9) 282 (127.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 241 Eaton Threaded Accessories Threaded Accessories Threaded accessories offered in this section are designed to reduce installation time. A wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged Steel, and Malleable Iron are used in the manufacturing of threaded accessories. Stainless Steel and other materials are available. Finishes The standard finishes for threaded accessories are plain steel (oil coated) sometimes referred to as black and ElectroGalvanized Zinc (ASTM B633 SC1). Hot-Dip Galvanized After Fabrication (ASTM A153) and other special coatings are available upon request. Approvals (as noted) Items in this section are Underwriters Laboratories Listed and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 SP-58. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 242 B-Line series Pipe Hangers & Supports B3222 - Eye Socket Size Range: 1/4"-20 thru 3/4"-10 rod Material: Malleable Iron Function: To provide an adjustable threaded connection for hanger rods. Approvals: Underwriters Laboratories Listed 3/8"-16 thru 3/4"-10. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 16 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 16. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Threaded Accessories A (Rod Size) Hanger Rod Not Included C B Maximum Bolt Size Threaded Accessories Part No. B3222-1/4 B3222-3/8 B3222-1/2 B3222-5/8 B3222-3/4 Rod Size A 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 Max. Bolt Size B in. (mm) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 3/8" (9.5) 1/2" (12.7) C in. (mm) 11/8" (28.6) 13/8" (34.9) 11/2" (38.1) 13/4" (44.4) 2" (50.8) Design Load Lbs. (kN) 400 (1.78) 730 (3.25) 1350 (6.00) 1580 (7.03) 1900 (8.45) Approx. Wt./100 Lbs. (kg) 6 (2.7) 9 (4.1) 16 (7.2) 21 (9.5) 38 (17.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 243 Eaton Threaded Accessories B3200 - Weldless Eye Nut Size Range: 3/8"-16 thru 21/2"-41/2 machine thread. Material: Forged Steel Quality Assurance: Conforms to the requirements of NCA 3800. Threads: Tapped UNC Class 2B. Right hand threads are standard. Left hand threads supplied upon request. Function: Used on piping installations where high strength and swivel action are required. Left hand tap is also available. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 17 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 17. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish. F A (Rod Size) A Hanger Rod Not Included D G C E B Part No. B3200-3/8 B3200-1/2 B3200-5/8 B3200-3/4 B3200-7/8 B3200-1 B3200-11/8 B3200-11/4 B3200-11/2 B3200-13/4 B3200-2 B3200-21/4 B3200-21/2 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 21/4"-41/2 21/2"-41/2 B in. (mm) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) C in. (mm) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 13/16" (30.2) 111/16" (42.9) 111/16" (42.9) 113/16" (46.0) 113/16" (46.0) 113/16" (46.0) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) D in. (mm) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 3/4" (19.0) 3/4" (19.0) 1" (25.4) 1" (25.4) 1" (25.4) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) E in. (mm) 2" (50.8) 2" (50.8) 2" (50.8) 2" (50.8) 25/8" (66.7) 25/8" (66.7) 33/8" (85.7) 33/8" (85.7) 33/8" (85.7) 61/4" (158.7) 61/4" (158.7) 61/4" (158.7) 61/4" (158.7) F in. (mm) 13/8" (34.9) 13/8" (34.9) 13/8" (34.9) 13/8" (34.9) 115/16" (49.2) 115/16" (49.2) 23/8" (60.3) 23/8" (60.3) 23/8" (60.3) 4" (101.6) 4" (101.6) 4" (101.6) 4" (101.6) G in. (mm) 11/16" (17.5) 11/16" (17.5) 11/16" (17.5) 11/16" (17.5) 1" (25.4) 1" (25.4) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) 21/4" (57.1) Part No. B3200-3/8 B3200-1/2 B3200-5/8 B3200-3/4 B3200-7/8 B3200-1 B3200-11/8 B3200-11/4 B3200-11/2 B3200-13/4 B3200-2 B3200-21/4 B3200-21/2 Design Load 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 610 (2.71) 1130 (5.02) 1810 (8.05) 2710 (12.05) 3770 (16.77) 4950 (22.02) 6230 (27.71) 8000 (35.58) 11630 (51.73) 15700 (69.83) 20700 (92,07) 27200 (120.98) 33500 (149.01) 540 (2.40) 1010 (4.49) 1610 (7.16) 2420 (10.76) 3360 (14.94) 4420 (19.66) 5560 (24.73) 7140 (31.76) 10370 (46.12) 14000 (62.27) 18460 (82.11) 24260 (107.91) 29880 (132.90) Approx. Wt./100 Lbs. (kg) 63 (28.6) 60 (27.2) 59 (26.7) 56 (25.4) 170 (77.1) 174 (78.9) 373 (169.2) 364 (165.1) 345 (156.5) 1657 (751.6) 1614 (732.1) 1562 (708.5) 1506 (683.1) Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 244 B-Line series Pipe Hangers & Supports B501 - Light Weight U-Bolt with 2 Hex Nuts Size Range: 1/2" (15mm) thru 8" (200mm) pipe Material: Carbon Steel Function: Recommended for supporting or anchoring light pipe loads. Maximum Temperature: 650�F (343�C) Finish: Plain. Contact customer service for alternative finishes and B materials. Order By: Part number and finish. Note: When furnished in Hot-Dip Galvanized finish, oversize tapped hex nuts must be used. B Thread Length Threaded Accessories A C Hex Nuts Included D Design Load Part No. B501-1/2 B501-3/4 B501-1 B501-11/4 B501-11/2 B501-2 B501-21/2 B501-3 B501-31/2 B501-4 B501-5 B501-6 B501-8 A in. (mm) 15/16" (23.8) 11/8" (28.6) 13/8" (29.9) 123/32" (43.6) 2" (50.8) 27/16" (61.9) 215/16" (74.6) 39/16" (90.5) 43/32" (94.6) 419/32" (116.7) 521/32" (143.6) 63/4" (171.4) 83/4" (222.2) B in. (mm) 13/4" (44.4) 13/4" (44.4) 17/8" (47.6) 13/4" (44.4) 13/4" (44.4) 21/16" (52.4) 21/16" (52.4) 2" (50.8) 2" (50.8) 21/4" (57.1) 21/4" (57.1) 25/8" (66.7) 25/8" (66.7) C in. (mm) 11/2" (38.1) 15/8" (41.3) 15/8" (41.3) 115/32" (37.3) 17/16" (36.5) 17/8" (47.6) 113/16" (46.0) 13/4" (44.4) 123/32" (43.6) 121/32" (50.0) 2" (50.8) 23/8" (60.3) 23/8" (60.3) D 5/16"-18 5/16"-18 5/16"-18 5/16"-18 5/16"-18 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 5/8"-11 5/8"-11 Design Load Lbs. (kN) 600 (2.67) 600 (2.67) 900 (4.00) 900 (4.00) 900 (4.00) 1200 (5.34) 1200 (5.34) 1800 (8.00) 1800 (8.00) 1800 (8.00) 2400 (10.70) 2400 (10.70) 2400 (10.70) Approx. Wt./100 Lbs. (kg) 12 (5.4) 13 (5.9) 14 (6.3) 15 (6.8) 16 (7.2) 27 (12.2) 32 (14.5) 36 (16.3) 38 (17.2) 42 (19.0) 92 (41.7) 176 (79.8) 191 (86.6) Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 245 Eaton Threaded Accessories B3188 - Standard U-Bolt with 4 Hex Nuts B3188C - Standard Plastic Coated U-Bolt Size Range: 1/2" (15mm) thru 30" (900mm) pipe Material: Steel Function: Recommended for support, anchor or guide of pipe. Design Load 2 Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24. Maximum Temperature: 750�F (399�C) Design Load 3 Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish. U-bolt can be furnished with longer tangents "D" or with longer threads "TL". Consult factory. Note: When furnished in Hot-Dip Galvanized finish, oversize tapped hex nuts must be used. B3188NS - Non-standard (NS) U-bolts are available upon request. Specify dimensions other than standard. B3188DI - For ductile iron pipe. C B E A Thread Size TL D Hex Nuts Included TL Thread Length Design Load 1 Part No. B3188-1/2 B3188-3/4 B3188-1 B3188-11/4 B3188-11/2 B3188-2 B3188-21/2 B3188-3 B3188-31/2 B3188-4 B3188-5 B3188-6 B3188-8 B3188-10 B3188-12 B3188-14 B3188-16 B3188-18 B3188-20 B3188-24 B3188-30 Pipe Size in. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) B3188 Thread Size 1/4"-20 1/4"-20 1/4"-20 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 1"-8 Thread Length TL in. (mm) 21/8" (54.0) 21/8" (54.0) 21/8" (54.0) 21/8" (54.0) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) 3" (76.2) 33/4" (95.2) 33/4" (95.2) 4" (101.6) 41/4" (107.9) 41/4" (107.9) 41/4" (107.9) 43/4" (120.6) 43/4" (120.6) 43/4" (120.6) 43/4" (120.6) B in. (mm) 15/16" (23.8) 11/8" (28.6) 13/8" (34.9) 111/16" (42.9) 2" (50.8) 27/16" (61.9) 215/16" (74.6) 39/16" (90.5) 41/16" (103.2) 49/16" (115.9) 521/32" (143.6) 63/4" (171.4) 83/4 " (222.2) 107/8" (276.2) 127/8" (327.0) 141/8" (358.8) 161/8" (409.6) 181/8" (460.4) 201/8" (511.2) 241/8" (612.8) 301/8" (765.2) B3188C Plastic Coated Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 246 B-Line series Pipe Hangers & Supports Threaded Accessories B3188 - Standard U-Bolt with 4 Hex Nuts cont. Part No. B3188-1/2 B3188-3/4 B3188-1 B3188-11/4 B3188-11/2 B3188-2 B3188-21/2 B3188-3 B3188-31/2 B3188-4 B3188-5 B3188-6 B3188-8 B3188-10 B3188-12 B3188-14 B3188-16 B3188-18 B3188-20 B3188-24 B3188-30 C in. (mm) 13/16" (30.2) 13/8" (34.9) 15/8" (41.3) 23/32" (53.2) 23/8" (60.3) 213/16" (71.4) 37/16" (87.3) 41/16" (103.2) 49/16" (115.9) 51/16" (128.6) 65/32" (156.3) 73/8" (187.3) 93/8" (238.1) 115/8" (295.3) 133/4" (349.2) 15" (381.0) 17" 191/8" 211/8" 251/8" 311/8" (431.8) (485.8) (536.6) (638.2) (790.6) Tangent D in. (mm) 23/4" 23/4" 23/4" 27/8" 3" 31/4" 33/4" 4" 41/4" 41/2" 5" 61/8" 71/8" 83/8" 95/8" 101/4" 111/4" 125/8" 135/8" 155/8" 185/8" (69.8) (69.8) (69.8) (73.0) (76.2) (82.5) (95.2) (101.6) (107.9) (114.3) (127.0) (155.6) (181.0) (212.7) (244.5) (260.3) (285.7) (320.7) (346.1) (396.9) (473.1) E in. (mm) 25/16" 27/32" 23/32" 21/32" 21/16" 21/16" 25/16" 21/4" 21/4" 21/4" 27/32" 213/16" 213/16" 3" 31/4" 31/4" 31/4" 35/8" 35/8" 35/8" 35/8" (58.7) (56.3) (53.2) (51.6) (52.4) (52.4) (58.7) (57.1) (57.1) (57.1) (56.3) (71.4) (71.4) (76.2) (82.5) (82.5) (82.5) (92.1) (92.1) (92.1) (92.1) Approx. Wt./100 Lbs. (kg) 10 (4.5) 11 (5.0) 11 (5.0) 28 (12.7) 29 (13.1) 31 (14.0) 72 (32.6) 79 (35.8) 84 (38.1) 94 (42.6) 104 (47.2) 203 (92.1) 241 (109.3) 412 (186.9) 661 (299.8) 707 (320.7) 782 (354.7) 1344 (609.6) 1458 (661.3) 1687 (765.2) 2030 (920.8) Part No. B3188-1/2 B3188-3/4 B3188-1 B3188-11/4 B3188-11/2 B3188-2 B3188-21/2 B3188-3 B3188-31/2 B3188-4 B3188-5 B3188-6 B3188-8 B3188-10 B3188-12 B3188-14 B3188-16 B3188-18 B3188-20 B3188-24 B3188-30 Design Load 1 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 580 (2.58) 454 (2.02) 580 (2.58) 454 (2.02) 580 (2.58) 454 (2.02) 1460 (6.49) 1144 (5.09) 1460 (6.49) 1144 (5.09) 1460 (6.49) 1144 (5.09) 2700 (12.01) 2114 (9.40) 2700 (12.01) 2114 (9.40) 2700 (12.01) 2114 (9.40) 2700 (12.01) 2114 (9.40) 2700 (12.01) 2114 (9.40) 4320 (19.21) 3382 (15.04) 4320 (19.21) 6460 (28.73) 9960 (44.30) 3382 (15.04) 5060 (22.50) 7016 (31.21) 9960 (44.30) 9960 (44.30) 11800 (52.48) 7016 (31.21) 7016 (31.21) 9240 (41.10) 11800 (52.48) 11800 (52.48) 11800 (52.48) 9240 (41.10) 9240 (41.10) 9240 (41.10) Design Load 2 650�F (343�C) Lbs. (kN) 145 (0.64) 145 (0.64) 145 (0.64) 365 (1.62) 365 (1.62) 365 (1.62) 675 (3.00) 675 (3.00) 675 (3.00) 675 (3.00) 675 (3.00) 1080 (4.80) 1080 (4.80) 1615 (7.18) 2490 (11.07) 2490 (11.07) 2490 (11.07) -- --- --- --- -- Design Load 3 650�F (343�C) Lbs. (kN) 180 (0.80) 300 (1.33) 480 (2.13) 600 (2.67) 600 (2.67) 720 (3.20) 720 (3.20) 900 (4.00) 900 (4.00) 900 (4.00) 1080 (4.80) 1080 (4.80) -- --- --- --- --- --- --- --- --- -- Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 247 Eaton Threaded Accessories B3201 - Forged Steel Clevis with Pin B3201WO - Forged Steel Clevis without Pin Size Range: 3/8"-16 thru 2"-41/2 rod Material: Forged Steel Function: For use on high temperature piping installations providing hanger rod adjustability. Features: Complies fully with code for pressure piping. Supports loads equal to the full limitation of the hanger rod. Available with pin and cotter pins, if required. B Center of clevis pin to underside of top D Boss Dia. N Thickness of threaded top. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 14 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 14. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish. If pin and cotter pins are required, specify "with pin". If other than standard combination of clevis size and rod tapping is required, specify clevis number, special rod tapping size and grip. A (Rod Size) Hanger Rod Not Included W Leg Width D B T N P Pin Dia. T G Grip Part No. B3201-3/8 B3201-1/2 B3201-5/8 B3201-3/4 B3201-7/8 B3201-1 B3201-11/8 B3201-11/4 B3201-11/2 B3201-13/4 B3201-2 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 B in. (mm) 39/16" (90.5) 39/16" (90.5) 39/16" (90.5) 4" (101.6) 4" (101.6) 51/16" (128.6) 51/16" (128.6) 51/16" (128.6) 6" (152.4) 515/16" (150.8) 7" (177.8) Part No. B3201-3/8 B3201-1/2 B3201-5/8 B3201-3/4 B3201-7/8 B3201-1 B3201-11/8 B3201-11/4 B3201-11/2 B3201-13/4 B3201-2 T in. (mm) 5/16" (7.9) 5/16" (7.9) 5/16" (7.9) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) W in. (mm) 11/16" (27.0) 11/16" (27.0) 11/16" (27.0) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 11/2" (38.1) 13/4" (44.4) 2" (50.8) 21/2" (63.5) D in. (mm) 17/16" (36.5) 17/16" (36.5) 17/16" (36.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 3" (76.2) 3" (76.2) 31/2" (88.9) 4" (101.6) 5" (127.0) Grip G in. (mm) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 21/2" (63.5) Design Load 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 730 (3.25) 572 (2.54) 1350 (6.00) 1057 (4.70) 2160 (9.61) 1692 (7.52) 3230 (14.37) 2530 (11.25) 4480 (19.93) 3508 (15.60) 5900 (26.24) 4620 (20.55) 7450 (33.14) 5830 (25.93) 9500 (42.25) 7440 (33.09) 13800 (61.38) 10807 (48.07) 18600 (82.73) 14566 (64.79) 24600 (109.42) 19625 (87.29) Pin Dia. N in. (mm) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 11/8" (28.6) 11/8" (28.6) 11/4" (31.7) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 13/4" (44.4) 21/4" (57.1) P in. (mm) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) 17/8" (47.6) 21/4" (57.1) Approx. Wt./100 With Pin Without Pin Lbs. (kg) Lbs. (kg) 102 (46.2) 85 (38.5) 112 (50.8) 82 (37.2) 134 (60.8) 78 (35.4) 250 (113.4) 163 (73.9) 305 (138.3) 161 (73.0) 656 (297.5) 449 (203.6) 718 (325.7) 433 (196.4) 603 (273.5) 382 (173.3) 952 (431.8) 600 (272.1) 1357 (615.5) 800 (362.9) 2403 (1090.0) 1600 (725.7) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 248 B-Line series Pipe Hangers & Supports Threaded Accessories B3203 - Extension Piece Size Range: 3/8"-16 thru 7/8"-9 rod Material: Malleable Iron Function: For use in attaching hanger rod to other attachments. (Use with B3054.) Approvals: Underwriters Laboratories Listed * Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish Part No. B3203-3/8 * B3203-1/2 * B3203-5/8 B3203-3/4 B3203-7/8 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 For Pipe Sizes in. (mm) 3/4" to 2" (20 to 50) 21/2" to 31/2" (65 to 90) 4"-5" (100 to125) 6" (150) 8" to 12" (200 to 300) Part No. B3203-3/8 B3203-1/2 B3203-5/8 B3203-3/4 B3203-7/8 E in. (mm) 9/16" (14.3) 11/16" (17.5) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) F in. (mm) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) B3223-3/8" - Offset Eye Socket Size Range: 3/8"-16 rod Material: Steel Function: Designed for attachment of 3/8"-16 hanger rod to structure. Approvals: Underwriters Laboratories Listed for up to 2" (50mm) pipe. Weight: Approx. Wt./100 - 6.0 lbs. (2.7kg) Finish: Electro-Galvanized Order By: Part number and finish Design Load: 610 lbs (2.71kN) Threaded Accessories F Distance from outside of boss to outside of boss. G A (Rod Size) Hanger Rod Not Included F E D B C * B in. (mm) 21/16" (52.4) 21/16" (58.7) 27/16" (61.9) 27/8" (73.0) 3" (76.2) G in. (mm) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 9/16" (14.3) C in. (mm) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 13/4" (44.4) 17/8" (47.6) Design Load Lbs. (kN) 730 (3.25) 1350 (6.00) 1550 (6.89) 2100 (9.34) 2350 (10.45) D in. (mm) 11/4" (31.7) 13/8" (34.9) 17/16" (36.5) 111/16" (42.9) 13/4" (44.4) Approx. Wt./100 Lbs. (kg) 18 (8.1) 37 (16.8) 42 (19.0) 56 (25.4) 75 (34.0) 17/64" Dia. (6.7) 2 Holes 13/32" Dia. (10.3) 1" (25.4) 35/8" (92.1) Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 249 Eaton Threaded Accessories B3224 - Hanger Adjuster B3224CT - Copper Tubing Hanger Adjuster Size Range: 1/4"-20 thru 3/4"-10 rod Material: Malleable Iron Function: To provide an adjustable threaded connection for hanger rods. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 15 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 15. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish Part No. B3224-1/4 B3224-3/8 B3224-1/2 B3224-5/8 B3224-3/4 Rod Size A 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 For Pipe Sizes in. (mm) 3/8" (10) 1/2" to 2" (15 to 50) 21/2" to 31/2" (65 to 90) 4" to 5" (100 to 125) 6" (150) B in. (mm) 13/4" (44.4) 13/4" (44.4) 13/4" (44.4) 21/4" (57.1) 21/4" (57.1) B3224 C in. (mm) 37/8" (98.4) 37/8" (98.4) 37/8" (98.4) 51/8" (130.2) 51/8" (130.2) A (Rod Size) Hanger Rod Not Included C B D Dia. B3224CT D in. (mm) 7/32" (5.5) 13/32" (10.3) 13/32" (10.3) 1/2" (12.7) 9/16" (14.3) Design Load Approx. Wt./100 Lbs. (kN) Lbs. (kg) 230 (1.02) 9 (4.1) 730 (3.25) 28 (12.7) 730 (3.25) 29 (13.1) 730 (3.25) 30 (13.6) 860 (3.82) 74 (33.5) B3202 - Turnbuckle Size Range: 3/8"-16 thru 2"-41/2 machine thread Material: Forged Steel Function: Standard turnbuckle tapped right and left hand which provides 6" (152.4mm) take up (3" (76.2mm) rod take out). Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 13, 3/8"-16 thru 11/2"-6 rod, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 13. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size and finish Part No. B3202-3/8 B3202-1/2 B3202-5/8 B3202-3/4 B3202-7/8 B3202-1 B3202-11/8 B3202-11/4 B3202-11/2 B3202-13/4 B3202-2 Rod Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 Design Load 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 730 (3.25) 572 (2.54) 1350 (6.00) 1057 (4.70) 2160 (9.61) 1692 (7.52) 3230 (14.37) 2530 (11.25) 4480 (19.93) 3508 (15.60) 5900 (26.24) 4620 (20.55) 7450 (33.14) 5830 (25.93) 9500 (42.25) 7440 (33.09) 13800 (61.38) 10807 (48.07) 18600 (82.73) 14566 (64.79) 24600 (109.42) 19625 (87.29) Approx. Wt./100 Lbs. (kg) 38 (17.2) 54 (24.5) 91 (41.3) 130 (58.9) 202 (91.6) 270 (122.5) 354 (160.6) 445 (201.8) 640 (290.3) 1100 (498.9) 1490 (675.8) A (Rod Size) Hanger Rod Not Included 3" (76.2) Rod TakeOut 6" (152.4) Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 250 B-Line series Pipe Hangers & Supports Threaded Accessories B3205 - Threaded Rod (right-hand threads - both ends) B3205L - Threaded Rod (right & left hand threads) Size Range: 3/8"-16 thru 3"-4 rod Material: Steel Function: Recommended for use as a hanger support in hanger assemblies. Rod is threaded on both ends with right hand threads of the length shown. Also available with left and right hand threads - specify Fig. B3205L when ordering. Maximum Temperature: 750�F (399�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size, length and finish TL Specify Length `L' TL A Thread Size Part No. B3205-3/8 x 'L' B3205-1/2 x 'L' B3205-5/8 x 'L' B3205-3/4 x 'L' B3205-7/8 x 'L' B3205-1 x 'L' B3205-11/8 x 'L' B3205-11/4 x 'L' B3205-11/2 x 'L' B3205-13/4 x 'L' B3205-2 x 'L' B3205-21/4 x 'L' B3205-21/2 x 'L' B3205-23/4 x 'L' B3205-3 x 'L' Thread Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 21/4"-41/2 21/2"-4 23/4"-4 3"-4 Standard Thread Length TL in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 4" (101.6) 41/2" (114.3) 5" (127.0) 6" (152.4) 7" (177.8) 8" (203.2) 9" (228.6) 10" (254.0) 11" (279.4) 12" (304.8) Design Load 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 730 (3.25) 572 (2.54) 1350 (6.00) 1057 (4.70) 2160 (9.61) 1692 (7.52) 3230 (14.37) 2530 (11.25) 4480 (19.93) 3508 (15.60) 5900 (26.24) 4620 (20.55) 7450 (33.14) 5830 (25.93) 9500 (42.25) 7440 (33.09) 13800 (61.38) 10807 (48.07) 18600 (82.73) 14566 (64.79) 24600 (109.42) 19625 (87.29) 32300 (143.67) 25295 (112.51) 39800 (177.03) 31169 (138.64) 49400 (219.73) 38687 (172.08) 60100 (267.32) 47066 (209.35) Threaded Accessories ATR - All Threaded Rod 120" (3.05m) Lengths Fig. 99 - All Threaded Rod Cut To Length Size Range: 3/8"-16 thru 11/2"-6 rod in 120" (3.05m) lengths or cut to length Material: Steel Maximum Temperature: 750�F (399�C) Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod diameter and finish Part No. - Size x Length ATR Fig.99 ATR 1/4" x 120 ATR 3/8" x 120 ATR 1/2" x 120 ATR 5/8" x 120 ATR 3/4" x 120 ATR 7/8" x 120 ATR 1" x 120 ATR 11/8" x 120 ATR 11/4" x 120 ATR 11/2" x 120 99-1/4" x length 99-3/8" x length 99-1/2" x length 99-5/8" x length 99-3/4" x length 99-7/8" x length 99-1" x length 99-11/8" x length 99-11/4" x length 99-11/2" x length Threads Per Inch 20 16 13 11 10 9 8 7 7 6 Recommended Load Lbs. (kN) 240 (1.07) 730 (3.24) 1350 (6.00) 2160 (9.60) 3230 (14.37) 4480 (19.93) 5900 (26.24) 7450 (33.14) 9500 (42.25) 13800 (61.38) Approx. Wt./100 Ft. Lbs. (kg) 12 (5.44) 29 (13.15) 53 (24.04) 89 (40.37) 123 (55.79) 170 (77.11) 225 (102.06) 280 (127.01) 351 (159.21) 510 (231.33) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 251 Eaton Threaded Accessories TOLCOTM Fig. 98 - Rod Stiffener TOLCOTM Fig. 98B - Rod Stiffener with Break-Off Bolt Head Size Range: Secures 3/8"-16 thru 7/8"-9 hanger rod Material: Steel Function: Secures channel to hanger rod for vertical seismic bracing. Slight distortion of the channel (strut) may occur upon installation of rod stiffeners. Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines Finishes: Fig. 98B - Electro Galvanized Fig. 98 - HDG or SS Contact customer service for alternative finishes and materials. Weight: Approx. Wt./100: Fig. 98 - 11.8 Lbs. (5.3kg) Fig. 98B - 12.7 Lbs. (5.7kg) Order By: Part number Fig. 98 Fig. 98B SC228 - Hanger Rod Stiffener Size Range: Secures 3/8"-16 thru 5/8"-11 hanger rod Material: Steel Function: Secures channel to hanger rod for vertical seismic bracing. Slight distortion of the channel (strut) may occur upon installation of rod stiffeners. Finish: Electro Galvanized. Contact customer service for alternative finishes and materials. Weight: Approx. Wt./100: 21.0 Lbs. (9.5kg) Order By: Part number Note: Order channel separately SC228B 11/2" (38.1) N228WO 3/8"-16 Threads SC228BS Threaded Accessories Rod Stiffener Requirements Rod Maximum Rod Length Maximum Spacing Between Size Without Rod Stiffener Rod Stiffeners 3/8" 19" (482mm) 13" (330mm) 1/2" 25" (635mm) 18" (457mm) 5/8" 31" (787mm) 23" (584mm) 3/4" 37" (940mm) 28" (711mm) 7/8" 43" (1092mm) 33" (838mm) 1" 50" (1270mm) 38" (965mm) 11/4" 60" (1524mm) 43" (1092mm) Notes: 1.) Rod stiffeners are required only on hanger and trapeze assemblies that have seismic bracing attached at or within 4" (101.6mm) of the rod. A minimum of two rod stiffeners (Figure 98, 98B, or SC228) must be installed. 2.) Recommended torque on Figure 98 and SC228 is 8 ft-lbs. (10.8Nm) or finger tight and one full turn with a wrench. Figure 98B has the break off bolt head. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 252 B-Line series Pipe Hangers & Supports TOLCOTM B3214 - Tie Bolt Material: Steel Function: Recommended for securing the connection of steel pipe to ductile pipe first attach tie bolts to pipe flanges then connect tie rods. May be used in vertical or horizontal applications. Approvals: Conforms to NFPA Pamphlet 24, Installation of Private Fire Service Maintenance 4" (100mm) - 12" (300mm) pipe size. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, size and finish. Custom lengths for thicker flange available. Threaded Accessories 1" (25.4mm) Max. Size Specify 4" (101.4mm) or 41/2" (114.3mm) 3/4" (19.0mm) Dia. Steel Pipe Riser Adapter Part No. B3214-4 B3214-41/2 Length in. (mm) 4" (101.6) 41/2" (114.3) Approx. Wt./100 Lbs. (kg) 107.5 (48.5) 113.7 (51.6) Ground Level Under Ground Pipe All Threaded Rod Ductile Iron Riser Typical Application B3213 - Coach Screw Rod Size Range: 3/8"-16 rod thru 1/2"-13 rod Material: Steel Function: Typically used to suspend pipe from wood joists. Machine threaded on one end and lag threaded on the other end. It is recommended that pilot holes be pre-drilled to prevent beam from splitting and to aid in starting lag threads. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size, length and finish C A Thread Size Specify L B Threaded Accessories Part No. B3213-3/8 x 'L' B3213-1/2 x 'L' Thread Size A 3/8"-16 1/2"-13 Standard Rod Lengths L in. (mm) *31/2", 8" (88.9, 203.2) *31/2", 8" (88.9, 203.2) Coach Screw Thread Length B in. (mm) 2" (50.8) 21/2" (63.5) Rod Thread Length C in. (mm) 2" (50.8) 21/2" (63.5) *3/8 x 31/2 and 1/2 x 31/2 will have a coach screw thread length of 2" (50.8) and a rod thread length of 1" (25.4). Design Load is based on proper installation and solid wood. Design Load Lbs. (kg) 390 (1.73) 640 (2.84) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 253 Eaton Threaded Accessories B3210 - Eye Rod (right-hand threads) B3210L - Eye Rod (left-hand threads) B3211 - Welded Eye Rod (right-hand threads) B3211L - Welded Eye Rod (left-hand threads) Size Range: 3/8"-16 thru 2"-41/2 rod Material: Steel Function: Designed for use as support hanger rod that may be attached directly to structure or to other pipe support product. The welded eye allows for heavier loads. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size, length and finish Eye I.D. Important Note: The Eye I.D. dimension may be larger if needed. Contact B-line if larger Eye I.D. dimension is required. A Thread Size B Thread Length B3210 Specify Length `L' B Eye I.D. B3211 Specify Length `L' A Thread Size B Thread Length B Part No. B3210-3/8 x 'L' B3211-3/8 x 'L' B3210-1/2 x 'L' B3211-1/2 x 'L' B3210-5/8 x 'L' B3211-5/8 x 'L' B3210-3/4 x 'L' B3211-3/4 x 'L' B3210-7/8 x 'L' B3211-7/8 x 'L' B3210-1 x 'L' B3211-1 x 'L' B3210-11/8 x 'L' B3211-11/8 x 'L' B3210-11/4 x 'L' B3211-11/4 x 'L' B3210-11/2 x 'L' B3211-11/2 x 'L' B3210-13/4 x 'L' B3211-13/4 x 'L' B3210-2 x 'L' B3211-2 x 'L' Thread Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 Thread Length B in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 4" (101.6) 41/2" (114.3) 5" (127.0) 6" (152.4) 7" (177.8) 8" (203.2) Eye I.D. in. (mm) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) 2" (50.8) 21/4" (57.1) B3210 650�F (343�C) Lbs. (kN) 240 (1.07) 440 (1.96) 705 (3.13) 1050 (4.67) 1470 (6.54) 1940 (8.63) 2430 (10.81) 3120 (13.88) 4650 (20.68) 6380 (28.38) 8280 (36.83) Design Load B3211 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 730 (3.25) 572 (2.54) 1350 (6.00) 1057 (4.70) 2160 (9.61) 1692 (7.52) 3230 (14.37) 2530 (11.25) 4480 (19.93) 3508 (15.60) 5900 (26.24) 4620 (20.55) 7450 (33.14) 5830 (25.93) 9500 (42.25) 7440 (33.09) 13800 (61.38) 10807 (48.07) 18600 (82.73) 14566 (64.79) 24600 (109.42) 19625 (87.29) Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 254 B-Line series Pipe Hangers & Supports Threaded Accessories B3210X - Linked Eye Rods (right-hand threads-both ends) B3210XL - Linked Eye Rods (left-hand & right-hand threads) B3211X - Linked Welded Eye Rods (right-hand threads-both ends) B3211XL - Linked Welded Eye Rods (left-hand & right-hand threads) Size Range: 3/8"-16 thru 2"-41/2 rod Material: Steel Function: Designed for use in a hanger assembly where universal movement is necessary. The welded eye rods allow for heavier loads. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, rod size, and length. B Thread Length B3210X Specify Length `L' A Thread Size B Thread Length B Thread Length B3211X Specify Length `L' A Thread Size B Thread Length Threaded Accessories Part No. B3210X-3/8 x 'L' B3211X-3/8 x 'L' B3210X-1/2 x 'L' B3211X-1/2 x 'L' B3210X-5/8 x 'L' B3211X-5/8 x 'L' B3210X-3/4 x 'L' B3211X-3/4 x 'L' B3210X-7/8 x 'L' B3211X-7/8 x 'L' B3210X-1 x 'L' B3211X-1 x 'L' B3210X-11/8 x 'L' B3211X-11/8 x 'L' B3210X-11/4 x 'L' B3211X-11/4 x 'L' B3210X-11/2 x 'L' B3211X-11/2 x 'L' B3210X-13/4 x 'L' B3211X-13/4 x 'L' B3210X-2 x 'L' B3211X-2 x 'L' Thread Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 Thread Length B in. (mm) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 4" (101.6) 41/2" (114.3) 5" (127.0) 6" (152.4) 7" (177.8) 8" (203.2) Eye I.D. in. (mm) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 15/8" (41.3) 2" (50.8) 21/4" (57.1) B3210X 650�F (343�C) Lbs. (kN) 240 (1.07) 440 (1.96) 705 (3.13) 1050 (4.67) 1470 (6.54) 1940 (8.63) 2430 (10.81) 3120 (13.88) 4650 (20.68) 6380 (28.38) 8280 (36.83) Design Load B3211X 650�F (343�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 730 (3.25) 572 (2.54) 1350 (6.00) 1057 (4.70) 2160 (9.61) 1692 (7.52) 3230 (14.37) 2530 (11.25) 4480 (19.93) 3508 (15.60) 5900 (26.24) 4620 (20.55) 7450 (33.14) 5830 (25.93) 9500 (42.25) 7440 (33.09) 13800 (61.38) 10807 (48.07) 18600 (82.73) 14566 (64.79) 24600 (109.42) 19625 (87.29) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 255 Eaton Threaded Accessories B3212 - J-Bolt Size Range: 3/8"-16 thru 7/8"-19 rod Material: Steel Function: Designed to be hooked or hung from beam flange or purlin. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, length and finish Part No. B3212-3/8 x 'L' B3212-1/2 x 'L' B3212-5/8 x 'L' B3212-3/4 x 'L' B3212-7/8 x 'L' Thread Size A 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 Thread Length TL in. (mm) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) 21/2" (63.5) Radius D in. (mm) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) Radius D Specify Length `L' A Thread Size TL Thread Length Design Load Lbs. (kg) 240 (1.07) 440 (1.96) 705 (3.13) 1050 (4.67) 1470 (6.54) DS 16 x 2 - Drive Screw Material: Steel Function: Equivalent to a nail, but has greater holding power Finish: Plain and Electro-Galvanized Order By: Part number, size and finish Threaded Accessories B3228 - Hex Head Lag Bolt Material: Steel Function: Designed to fasten metal to wood. Lag screws are made with hex heads in lengths of 6" (152.5mm) or shorter and square heads in lengths longer than 6" (152.5mm). Both types have coarse lag threads and gimlet points and are available in diameters of 1/4" (6.3mm) to 5/8" (15.9mm) inclusive. Square-head lag screws are also available in 3/4" (19.0mm), 7/8" (22.2mm) and 1" (25.4mm) diameters. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number, bolt size, length and finish Length 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 31/2" (88.9) 4" (101.6) 41/2" (114.3) 5" (127.0) 51/2" (139.7) 6" (152.4) 1/4" (6.3) 2.3 (1.0) 2.8 (1.3) 3.3 (1.5) 3.9 (1.7) 4.4 (2.0) 5.0 (2.2) 5.7 (2.6) 6.3 (2.8) 7.0 (3.2) 7.4 (3.3) Bolt Diameter and Wt./C 3/8" (9.5) 1/2" (12.7) 6.0 (2.7) 11.8 (5.3) 7.0 (3.2) 14.4 (6.5) 8.3 (3.7) 16.2 (7.3) 9.8 (4.4) 18.6 (8.4) 11.4 (5.2) 21.2 (9.6) 12.5 (5.7) 23.3 (10.5) 14.0 (6.3) 26.1 (11.8) 15.4 (7.0) 29.0 (13.1) 16.4 (7.4) 31.5 (14.3) 18.3 (8.3) 34.0 (15.4) 5/8" (15.9) 19.4 (8.8) 23.2 (10.5) 27.0 (12.2) 31.0 (14.0) 34.8 (15.8) 37.6 (17.0) 42.6 (19.3) 45.5 (20.6) 49.3 (22.3) 53.0 (24.0) 3/4" (19.0) 32.3 (14.6) 38.3 (17.4) 44.0 (19.9) 47.7 (21.6) 56.3 (25.5) 58.5 (26.5) 64.0 (29.0) 68.0 (30.8) 74.0 (33.5) 77.0 (34.9) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 256 B-Line series Pipe Hangers & Supports B655 - Steel Rod Coupling B656 - Steel Reducing Rod Coupling Size Range: 1/4"-20 thru 1"-8 rod Material: Steel Function: Used for coupling two threaded rods together of equal or reduced rod sizes, with or without inspection hole. Finish: Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and finish Threaded Accessories For Rod Part No. Size Length in. (mm) Design Load Approx. Wt./100 Lbs. (kN) Lbs. (kg) B655-1/4 1/4"-20 7/8" (22.2) 300 (1.33) 1.9 (0.86) B655-3/8 3/8"-16 11/8" (28.6) 730 (3.25) 3.6 (1.63) B655-1/2 1/2"-13 13/4" (44.4) 1350 (6.00) 11.3 (5.12) B655-5/8 5/8"-11 21/8" (54.0) 2160 (9.61) 17.6 (7.98) B655-3/4 3/4"-10 21/4" (57.1) 3230 (14.37) 28.1 (12.74) B655-7/8 7/8"-9 21/2" (63.5) 4480 (19.93) 57.2 (25.94) B655 B655-1 1"-8 23/4" (69.8) 5900 (26.24) 73.7 (33.43) Part No. B656-3/8 x 1/4 B656-1/2 x 3/8 For Rod Size 3/8"-16 & 1/4"-20 1/2"-13 & 3/8"-16 Length in. (mm) 1" (25.4) 11/4" (31.7) Design Load Lbs. (kN) 300 (1.33) 730 (3.25) Approx. Wt./100 Lbs. (kg) 3.7 (1.68) 6.6 (2.99) B656-5/8 x 1/2 5/8"-11 & 1/2"-13 11/4" (31.7) 1350 (6.00) 11.6 (5.26) B656-3/4 x 5/8 3/4"-10 & 5/8"-11 11/2" (38.1) 2160 (9.61) 20.6 (9.34) B656-7/8 x 3/4 7/8"-9 & 3/4"-10 13/4" (44.4) 3230 (14.37) 39.4 (17.87) B656 Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 257 Eaton Threaded Accessories B3220 - Rod Coupling Size Range: 3/8"-16 thru 1"-8 rod Material: Malleable Iron Function: Used for coupling two threaded rods together of equal rod sizes, with inspection hole. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish Part No. B3220-1/4 B3220-3/8 x 1/4 B3220-3/8 B3220-1/2 x 3/8 B3220-1/2 B3220-5/8 B3220-3/4 B3220-7/8 B3220-1 For Rod Size 1/4"-20 3/8"-16 to 1/4"-20 3/8"-16 1/2"-13 to 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 Overall Length in. (mm) 13/8" (34.9) 15/8" (41.3) 15/8" (41.3) 21/8" (54.0) 21/8" (54.0) 21/2" (63.5) 25/8" (66.7) 33/16" (55.6) 23/4" (69.8) Overall Length Design Load Lbs. (kN) 300 (1.33) 300 (1.33) 730 (3.25) 730 (3.25) 1350 (6.00) 2160 (9.61) 3230 (14.37) 4480 (19.93) 5900 (26.24) Approx. Wt./100 Lbs. (kg) 6 (2.7) 11 (5.0) 10 (4.5) 20 (9.1) 20 (9.1) 32 (14.5) 42 (19.0) 91 (41.3) 100 (45.3) Hanger Rod Not Included B200 - Series Square Washer Material: Steel Standard Finish: Electro-Galvanized Service: Designed as a washer to suspend hanger rods. Order by: Part number and finish. 15/8" (41.3) Hole Size A Part No. B200 B201 B202 B202-1 B202-2 Hole Size A in. (mm) 3/8" (9.5) 7/16" (11.1) 9/16" (14.2) 11/16" (17.4) 13/16" (20.6) Bolt Size 5/16"-18 3/8"-16 1/2"-13 5/8"-11 3/4"-10 Thickness in. (mm) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) Approx. Wt./100 Lbs. (kg) 18 (8.1) 18 (8.1) 17 (7.7) 16 (7.2) 15 (6.8) Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 258 B-Line series Pipe Hangers & Supports B3248 - Steel Washer Plate Size Range: 3/8" thru 1" rod sizes Material: Steel Function: Heavy duty washer for use on top of channels or angles to support hanger rod. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number and finish. Threaded Accessories C T A A Part No. B3248-3/8 B3248-1/2 B3248-5/8 B3248-3/4 B3248-7/8 B3248-1 Rod Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 Hole Size C in. (mm) 7/16" (11.1) 9/16" (14.3) 11/16" (17.5) 13/16" (20.6) 15/16" (23.8) 11/8" (28.6) A in. (mm) 2" (50.8) 2" (50.8) 21/2" (63.5) 21/2" (63.5) 3" (76.2) 4" (101.6) T in. (mm) 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) Approx. Wt./100 Lbs. (kg) 27 (12.2) 27 (12.2) 47 (21.3) 52 (23.6) 85 (38.5) 160 (72.6) B3234 - Bevel Washer Size Range: 3/8"-16 thru 7/8"-9 bolt Material: Malleable Iron Function: Designed to match taper of flange of I-beam or channel to permit right angle fastening of bolt. Finish: Plain. Contact customer service for alternative finishes and materials. Order By: Part number size and finish T2 A A T1 Threaded Accessories Part No. B3234-3/8 B3234-1/2 B3234-5/8 B3234-3/4 B3234-7/8 For Bolt Size 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 A in. (mm) 11/4" (31.7) 11/4" (31.7) 11/2" (38.1) 11/2" (38.1) 2" (50.8) T1 in. (mm) 5/32" (3.9) 5/32" (3.9) 5/32" (3.9) 7/32" (5.5) 7/32" (5.5) T2 in. (mm) 11/32" (8.7) 11/32" (8.7) 13/32" (10.3) 15/32" (11.9) 9/16" (14.3) Approx. Wt./100 Lbs. (kg) 9 (4.1) 9 (4.1) 14 (6.3) 16 (7.2) 33 (14.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 259 Eaton Threaded Accessories HN - Standard Hex Nut Size Range: 1/4"-20 thru 7/8"-9 Material: Steel Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number size and finish Part For Number Rod Size HN-1/4 HN-3/8 HN-1/2 HN-5/8 HN-3/4 HN-7/8 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 Width Across Flats in. (mm) 7/16" (11.1) 9/16" (14.3) 3/4" (19.0) 15/16" (23.8) 11/8" (28.6) 15/16" (33.3) Width Across Points in. (mm) 1/2" (12.7) 21/32" (16.6) 55/64" (21.8) 13/32" (27.8) 15/16" (33.3) 133/64" (38.5) Thickness in. (mm) 7/32" (5.7) 21/64" (8.3) 7/16" (11.1) 35/64" (13.9) 41/64" (16.3) 3/4" (19.0) Approx. Wt./100 lbs. (kg) 0.7 (0.3) 1.6 (0.7) 3.7 (1.7) 7.3 (3.3) 12.0 (5.4) 19.0 (8.6) HHN - Heavy Hex Nut Size Range: 1/4"-20 thru 7/8"-9 Material: Steel Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number size and finish Part For Number Rod Size HHN-1/4 HHN-3/8 HHN-1/2 HHN-5/8 HHN-3/4 HHN-7/8 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 Width Across Flats in. (mm) 1/2" (12.7) 11/16" (17.5) 7/8" (22.2) 11/16" (27.0) 11/4" (31.7) 17/16" (36.5) Width Across Points in. (mm) 37/64" (14.7) 51/64" (20.2) 11/8" (28.6) 115/64" (31.3) 129/64" (36.9) 121/32" (42.6) Thickness in. (mm) 15/64" (5.9) 23/64" (9.1) 31/64" (12.3) 39/64" (15.5) 47/64" (18.6) 55/64" (21.8) Approx. Wt./100 lbs. (kg) 1.2 (0.5) 3.1 (1.4) 6.5 (2.9) 12.0 (5.4) 19.0 (8.6) 30.0 (13.6) Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 260 B-Line series Pipe Hangers & Supports FW - Flat Washer Size Range: 1/4"-20 thru 1"-8 rods Material: Steel Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number size and finish Part For Number Rod Size FW-1/4 FW-3/8 FW-1/2 FW-5/8 FW-3/4 FW-7/8 FW-1 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 Outside Diameter in. (mm) 3/4" (19.0) 1" (25.4) 13/8" (34.9) 13/4" (44.4) 2" (50.8) 21/4" (57.1) 21/2" (69.8) Approx. Wt./100 lbs. (kg) 0.7 (0.3) 3.9 (1.7) 6.7 (3.0) 7.3 (3.3) 11.0 (5.0) 19.0 (8.6) 22.0 (10.0) LW - Lock Washer Size Range: 1/4"-20 thru 1"-8 rods Material: Steel Finish: Plain or Electro-Galvanized. Note: Available in Hot Dip Galvanized finish or Stainless Steel materials. Order By: Part number size and finish Part For Number Rod Size LW-1/4 LW-3/8 LW-1/2 LW-5/8 LW-3/4 LW-7/8 LW-1 1/4"-20 3/8"-16 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 Outside Diameter in. (mm) .49" (12.4) .68" (17.3) .88" (22.3) 1.08" (27.4) 1.27" (32.2) 1.46" (37.1) 1.66" (42.1) Approx. Wt./100 lbs. (kg) 0.3 (0.13) 0.6 (0.27) 1.3 (0.59) 2.4 (1.09) 3.8 (1.72) 5.9 (2.67) 8.8 (3.99) FFW - Flat Fender Washer Size Range: 3/8"-16 and 1/2"-13 rods Material: Steel Function: To provide a greater bearing surface than standard washer. Finish: Plain or Electro-Galvanized. Contact customer service for alternative finishes and materials. Order By: Part number and size Part For Number Rod Size FFW-3/8 FFW-1/2 3/8"-16 1/2"-13 Inside Diameter in. (mm) 1/2" (12.7) 9/16" (14.3) Outside Diameter in. (mm) 11/8" (28.6) 2" (50.8) Approx. Wt./100 lbs. (kg) 3.0 (1.3) 2.8 (1.3) Threaded Accessories Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 261 Eaton Threaded Accessories ATB - Toggle Bolt Material: Steel Function: Used with threaded rod in hollow walls Finish: Electro-Galvanized Order By: Part number and size Part Number ATB-18-300 ATB-18-400 ATB-25-300 ATB-25-400 ATB-37-300 ATB-37-400 Rod Size 3/16"-24 3/16"-24 1/4"-20 1/4"-20 3/8"-16 3/8"-16 Drill Size lbs. (kg) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 7/8" (22.2) 7/8" (22.2) Approx. Wt./100 3.8 (1.7) 4.4 (2.0) 6.6 (3.0) 7.8 (3.5) 15.6 (7.1) 17.6 (8.0) AWA - Wedge Anchor Material: Steel or Stainless Steel Function: Designed for use in solid concrete and grout fill blocks Finish: Electro-Galvanized Order By: Part number and finish Part Number AWA-25-175 AWA-25-225 AWA-25-325 AWA-37-225 AWA-37-275 AWA-37-300 AWA-37-350 AWA-37-375 AWA-37-500 AWA-50-275 AWA-50-375 AWA-50-450 AWA-50-550 AWA-50-700 AWA-62-350 AWA-62-450 AWA-62-500 AWA-62-600 AWA-62-700 Anchor Size 1/4"-20 x 13/4" (44.4mm) 1/4"-20 x 21/4" (44.4mm) 1/4"-20 x 31/4" (44.4mm) 3/8"-16 x 21/4" (44.4mm) 3/8"-16 x 23/4" (69.8mm) 3/8"-16 x 3" (76.2mm) 3/8"-16 x 31/2" (88.9mm) 3/8"-16 x 33/4" (95.2mm) 3/8"-16 x 5" (127.0mm) 1/2"-13 x 23/4" (69.8mm) 1/2"-13 x 33/4" (95.2mm) 1/2"-13 x 41/2" (114.3mm) 1/2"-13 x 51/2" (139.7mm) 1/2"-13 x 7" (177.8mm) 5/8"-11 x 31/2" (88.9mm) 5/8"-11 x 41/2" (114.3mm) 5/8"-11 x 5" (127.0mm) 5/8"-11 x 6" (152.4mm) 5/8"-11 x 7" (177.8mm) Thread Length in. (mm) 3/4" (19.0) 11/4" (31.7) 21/4" (57.1) 11/4" (31.7) 15/8" (41.3) 17/8" (47.6) 23/8" (60.3) 25/8" (66.7) 37/8" (98.4) 13/8" (34.9) 23/8" (60.3) 31/8" (79.4) 41/8" (104.8) 55/8" (142.9) 2" (50.8) 3" (76.2) 31/2" (88.9) 41/2" (114.3) 51/2" (139.7) Approx. Wt./100 lbs. (kg) 3.2 (1.4) 3.7 (1.7) 4.8 (2.2) 9.4 (4.2) 10.4 (4.7) 11.4 (5.2) 12.2 (5.5) 13.2 (6.0) 16.0 (7.2) 19.0 (8.6) 23.0 (10.4) 26.6 (12.0) 34.0 (15.4) 38.0 (17.2) 41.2 (18.7) 47.6 (21.6) 52.0 (23.6) 58.8 (26.7) 65.2 (29.6) Threaded Accessories Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 262 B-Line series Pipe Hangers & Supports Threaded Accessories Threaded Accessories B-Line series Pipe Hangers & Supports 263 Eaton Vibration Isolation To help address the issues of vibration and noise control/dampening vibration in mechanical, refrigeration, HVAC and electrical installations, Eaton offers the following B-Line series vibration isolation products. It is our continuing effort to offer the industry quality support system products that meet the demands of today's construction environment. The following pages depict vibration isolation and noise control products that are commonly specified and required on piping, duct and equipment, but not limited to mechanical rooms. As an aid in choosing the proper vibration control device, the chart shown on the following page is a reference for obtaining Vibration Isolation Efficiency. Considerations must be given to the desired deflection and the frequency (R.P.M.). The Theory of Vibration Isolation Background Soils, floors, ceilings, walls, etc. deflect as the result of applied forces. Cyclical forces generated by machines result in work done on the floors, etc. Under steady state conditions, this work is stored as potential energy in the floor each cycle and returned as work in forcing the machine back to its equilibrium position. Disturbance is transmitted during this flexing. Vibration Isolation is needed when disturbing force magnitudes are expected to be great enough to cause damage or annoyance. Assumption Fact 1. We know the effects of vibration isolation (efficiency) Formula for calculation shown below. 2. We know the magnitude of the disturbing forces created by the machines Equipment manufacturers rarely provide these data. These forces are seldom known except in generalities. 3. We know the magnitude of disturbing forces beyond Detailed calculations require so many simplifying assumptions that the resulting answers have questionable value in addition to being prohibitively expensive. Reliance is placed on brief calculations, general rules, and past experience. Consideration of items 1. and 2. is essential to determine acceptable isolation efficiency. Unfortunately manifold complexities prevent inclusion of steps for determination of these efficiencies in this document. Eaton 264 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation Data Natural frequency of isolation system fn (cycles per minute) Visualize a machine suspended barely above 4 springs (one on each corner). Now release the suspension. The machine will deflect the springs and be pushed up and return a number of times with diminishing deflection until it comes to rest. The spring deflection at rest is called the static deflection. The number of cycles per unit time is the natural frequency of the isolation system. Unlike multi-degree of freedom floors with limitless natural frequencies, springs essentially have only one natural frequency. fn = 188 1 static deflection (inches) [ ] 1 Vibration isolation efficiency % = 100% x 1 (fd � fn)2 - 1 Transmitted force ft (pounds) ft = fd (100% - isolation efficiency) Note that fn must be compared to fd for satisfactory isolation efficiency. Also note that the force transmitted can be greater than the disturbing force when fn is close to or equals fd. This condition is called resonance and is avoided in vibration isolation. Natural frequency of floor or soil Visualize the effect of dropping a load on the floor. This floor will deflect and spring back diminishingly a number of cycles until it comes to rest. The number of these cycles per unit time is a natural frequency of the floor. It is essentially independent of the magnitude of deflection and hence is a characteristic of a given floor if given a light tap or a hard jolt at the same location. The floor has many natural frequencies. The lowest natural frequency is called the fundamental. It is characterized by maximum deflection at mid span. The higher natural frequencies are generally less bothersome than the fundamental since they are less likely to be excited by machines in common use and are more quickly damped. The greater a floor deflects under a given load, the lower the fundamental frequency of that floor. Soft, springy floors have low fundamentals. Hard, solid floors have high fundamentals. Disturbing frequency fd (cycles per minute) With few exceptions, the speed (RPM) of the machine will be most representative of the frequency of the disturbance. Disturbances are more readily transmitted when the disturbing frequency is close to a natural frequency of the floor or soil. For this reason, these characteristics are important considerations i designing a trouble-free installation. Disturbing force fd (pounds) The disturbing force causes the problem. It is constantly changing from maximum positive through zero to maximum negative through zero to maximum positive each cycle. It results from unbalanced reciprocating and rotating masses. Its peak magnitude varies from ounces to tons. From less than 1% to over 60% of the weight of some types of machines. Generally this force will increase with time in a given machine as bearings wear, deposits form and moving parts get out of balance with each other. Vibration Isolation Proper Sizing Once it is determined as to what type of vibration dampening device is needed, weight loading is the next crucial step. As a built in safety measure, take the actual weight of supported pipe or equipment (consider all accessories - i.e. valves, insulation, brackets, etc...) and multiply by 1.25. Then refer to the sizing chart for the selected product to determine part number. Sizing: Divide weight of equipment by points of support to determine load requirement per support. Example: 240 Lb. (90.7 kg) piece of equipment, 4 support points, take 240 x 1.25 = 300 Lbs. (136.1kg) (safety measure), then take 300 � 4 = 75 Lbs. (34.0 kg) Specify appropriate vibration device rated at 75 Lbs. (34.0 kg) for each of the support points. If weight of equipment is unequally proportionate, select mounts to satisfy the weight distribution. B-Line series Pipe Hangers & Supports 265 Eaton Vibration Isolation IE Computer Isolation Efficiency fn = 188 1 static deflection (inches) 1 Transmissibility = (fd � fn)2 - 1 3 HX = 180 cpm = 1.1" Deflection fd Disturbing Frequency - (cycles per minute) (Cycles Per Minute) fn Natural Frequency of Isolation System Undamped Static Deflection - (Inches) Vibration Isolation % Isolation Efficiency � 100% - Transmissibility Critical Installations 96% to 99% Vibration Isolation Efficiency recommended (only 1% to 4% of disturbing vibration transmitted). Standard Installations 90% to 95% Vibration Isolation Efficiency recommended (only 5% to 10% of disturbing vibration transmitted). Non-Critical Installations 75% to 89% Vibration Isolation Efficiency recommended (only 11% to 24% of disturbing vibration transmitted). For 1/4" (6.3mm) deflection: Specify B-Line series RM and RQ Neoprene Mountings or B-Line series RH Neoprene Hangers. For 1/2" (12.7mm) deflection: Specify B-Line series RMD and RQD, (or JQTN fo OSHPD pre-approved) Neoprene Mountings or BLine series RHD Neoprene Hangers. For 1"-2" (25.4mm-50.8mm) deflection: Specify B-Line series CHSCS, CH30SCS, HHSCS, and HH30SCS Housed Spring Mountings. For larger deflection requirements, consult factory. Eaton 266 B-Line series Pipe Hangers & Supports Vibration Isolation NNP Type - Ribbed Neoprene Vibration Pad Use: Is used under equipment to dampen noise and vibration in floor caused by medium and high speed equipment. � Recommended load capacity: Up to 50 lbs./sq.in. (0.042 kgf/mm2) with a range of 25-70 lbs./sq.in. (0.021-0.059 kgf/mm2) � Thickness: 3/8" (9.5mm) � The NNP type has a deflection of 1/8" (3.1mm). For greater deflection, use multiple pads in layers � Non-skid: The pad has an alternating height rib pattern to minimize slip � Durable: Material is oil-resistant Neoprene � Typical Applications: Air conditioners, cooling towers, compressors, fans, generators, pumps, piping, process equipment, transformers, etc. 3/8" (9.5) L W Part No. NNP-4 NNP-9 NNP-16 NNP-36 NNP-81 NNP-324 Rated Load Lbs. (kN) 200 (.89) 450 (2.00) 800 (3.56) 1800 (8.00) 4050 (18.01) 16200 (72.06) Dimensions Wt. L W Std. Each in. (mm) in. (mm) Pkg. Lbs. (kg) 2" (50.8) 2" (50.8) 48 .04 (.02) 3" (76.2) 3" (76.2) 36 .10 (.05) 4" (101.6) 4" (101.6) 24 .17 (.08) 6" (152.4) 6" (152.4) 24 .39 (.18) 9" (228.6) 9" (228.6) Bulk .87 (.39) 18" (457.2) 18" (457.2) 6 3.50 (1.59) Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 267 Eaton Vibration Isolation CNP Type - Cork and Ribbed Neoprene Vibration Pad Use: Is used under equipment to dampen noise and vibration in floor caused by medium and high speed equipment. � Recommended load capacity: Up to 50 lbs./sq.in. (0.042 kgf/mm2) with a range of 25-70 lbs./sq.in. (0.021-0.059 kgf/mm2) � Thickness: 1" (25.4mm) � The NNP type has a deflection of 3/16" (4.7mm). For greater deflection, use multiple pads in layers � Non-skid: The pad has an alternating height rib pattern to minimize slip � Durable: Material is oil-resistant Neoprene � Typical Applications: Air conditioners, cooling towers, compressors, fans, generators, pumps, piping, process equipment, transformers, etc. 1" (25.4) L W Vibration Isolation Part No. CNP-4 CNP-9 CNP-16 CNP-25 CNP-36 CNP-81 CNP-324 CNP-3x36 CNP-4x36 Rated Load Lbs. (kN) 200 (.89) 450 (2.00) 800 (3.56) 1250 (5.56) 1800 (8.00) 4050 (18.01) 16200 (72.06) 5400 (24.02) 7200 (32.02) Dimensions Wt. L W Std. Each in. (mm) in. (mm) Pkg. Lbs. (kg) 2" (50.8) 2" (50.8) 48 .07 (.03) 3" (76.2) 3" (76.2) 36 .16 (.07) 4" (101.6) 4" (101.6) 24 .28 (.13) 5" (127.0) 5" (127.0) 24 .44 (.20) 6" (152.4) 6" (152.4) 24 .63 (.29) 9" (228.6) 9" (228.6) Bulk 1.40 (.64) 18" (457.2) 18" (457.2) 6 5.60 (2.54) 3" (76.2) 36" (914.4) 6 1.89 (.86) 4" (101.6) 36" (914.4) 6 2.52 (1.14) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 268 B-Line series Pipe Hangers & Supports Vibration Isolation CNNK Type - Cork, Ribbed Neoprene and Steel Vibration Pad Use: Is used to dampen noise and vibration in floor caused by medium and high speed equipment. � Recommended load capacity: Up to 50 lbs./sq.in. (0.042 kgf/mm2) with a range of 25-70 lbs./sq.in. (0.021-0.059 kgf/mm2) � Overall thickness: 11/2" (38.1mm) Has 1/4" (6.3mm) steel plate for even weight distribution. Hole in center will accept up to 3/4" bolt � The CNNK type has a deflection of 3/16" (4.7mm). For greater deflection, use multiple pads in layers � Non-skid: The pad has an alternating height rib pattern to minimize slip � Durable: Material is oil-resistant Neoprene � Typical Applications: Air conditioners, cooling towers, compressors, fans, generators, pumps, piping, process equipment, transformers, etc. 13/16" (20.6) dia. hole 11/2" (38.1) W L Part No. CNNK-4 CNNK-9 CNNK-16 CNNK-25 CNNK-36 CNNK-64 Rated Load Lbs. (kN) 200 (.89) 450 (2.00) 800 (3.56) 1250 (5.56) 1800 (8.00) 3200 (14.23) Dimensions Wt. L W Std. Each in. (mm) in. (mm) Pkg. Lbs. (kg) 2" (50.8) 2" (50.8) 48 .40 (.18) 3" (76.2) 3" (76.2) 36 .90 (.41) 4" (101.6) 4" (101.6) 24 1.60 (.73) 5" (127.0) 5" (127.0) 24 2.50 (1.13) 6" (152.4) 6" (152.4) Bulk 3.50 (1.59) 8" (203.2) 8" (203.2) 6 6.20 (2.81) Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 269 Eaton Vibration Isolation VRP Type - Rubber Cube Vibration Pad Use: Is used to dampen noise and vibration in floor caused by medium and high speed equipment. � Recommended load capacity: Up to 45 lbs./sq.in. (0.038 kgf/mm2) per 1 square inch � Overall thickness: 3/4" (19.0mm) � Rated deflection is 3/16" (4.7mm). � Durable: Material is natural rubber composition � Each square has 4 suction holes (1/2" (12.7mm) diameter) to provide a non-skid effect. The standard VRP pad has 81 squares that are 2" x 2" (50.8mm x 50.8mm) making the pad itself 18" x 18" (457.2mm x 457.2mm). These squares are easily cut or torn to desired sizes. VRP-4 VRP-16 VRP-324 W 2" (50.8) 2" (50.8) L VRP-36 3/4" (19.0) VRP-324 shown Eaton Part No. VRP-4 VRP-16 VRP-36 VRP-324 Rated Load Lbs. (kN) 180 (.80) 720 (3.20) 1620 (7.20) 14580 (64.85) Dimensions Wt. L W Std. Each in. (mm) in. (mm) Pkg. Lbs. (kg) 2" (50.8) 2" (50.8) Bulk .10 (.05) 4" (101.6) 4" (101.6) Bulk .41 (.19) 6" (152.4) 6" (152.4) Bulk .90 (.41) 18" (457.2) 18" (457.2) 3 8.15 (3.70) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 270 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation BVS Type - Vibra StripTM for 15/8" (41.3mm) wide Eaton B-Line series channel Use: Dampen noise and vibration of equipment when mounted on strut. � When inserted in channel slot, provides an excellent isolation medium between equipment, duct, piping, etc., and the support channel. � Vibra Strip is furnished in 12" (304.8mm) or 120" (3.05m) lengths, may be cut to satisfy specific requirement. � Durable: 45 durometer Neoprene � Temperature Range: -20�F (-28.9�C) to 212�F (100�C) (continuous) BVS-12 BVS-120 Vibration Isolation Part No. BVS-12 BVS-120 Max. Load Lbs. per Lineal In. Lbs. (kg/25.4 mm) 40 (18.1) 40 (18.1) Length Std. in. (mm) Pkg. 12" (304.8) 25 120" (3048.0) 1 Wt. Each Lbs. (kg) .46 (.21) 4.56 (2.07) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 271 Eaton Vibration Isolation RM & RM-D Type - Neoprene Mount Use: To minimize or prevent noise and vibration from transferring between equipment and floor or solid support structure. Typical applications include air handling units, air conditioners, compressors, pumps, machine tools, motors, business machines, transformers, furnaces, etc. L S 1/4" (6.3) Deflection O T (thread) KW JH 1/2" (12.7) Deflection Typical Part Numbering RM - 80 A Type Load Mount Size RM Series for 1/4" (6.3mm) Deflection Part Mount Maximum No. Size Load Lbs. (kN) RM-40A RM-55A RM-80A RM-130A A 40 (0.18) A 55 (0.25) A 80 (0.35) A 130 (0.58) RM-120B RM-200B RM-280B RM-400B B 120 (0.53) B 200 (0.89) B 280 (1.24) B 400 (1.78) RM-300C RM-520C RM-750C RM-1100C C 300 (1.33) C 520 (2.31) C 750 (3.33) C 1100 (4.89) RM-1800F RM-3000F RM-5000F F 1800 (8.00) F 3000 (13.3) F 5000 (22.2) Color Code Orange Yellow Green Blue Orange Yellow Green Blue Yellow Green Blue White Green Blue Green RM-D Series for 1/2" (12.7mm) Deflection Part Mount Maximum No. Size Load Lbs. (kN) RM-D-40A A 40 (0.18) RM-D-55A A 55 (0.25) RM-D-80A A 80 (0.35) RM-D-130A A 130 (0.58) RM-D-120B B 120 (0.53) RM-D-200B B 200 (0.89) RM-D-280B B 280 (1.24) RM-D-400B B 400 (1.78) RM-D-300C C RM-D-520C C RM-D-750C C RM-D-1100C C 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) RM-D-1800F F 1800 (8.00) RM-D-3000F F 3000 (13.3) RM-D-5000F F 5000 (22.2) Color Code Orange Yellow Green Blue Orange Yellow Green Blue Yellow Green Blue White Green Blue Green Mount Size A B C F Dimensions L in. (mm) 33/16 (81.0) 37/8 (98.4) 51/2 (134.7) 71/2 (190.5) S W O in. (mm) in. (mm) in. (mm) 23/8 (27.8) 3 (76.2) 41/8 (104.8) 61/8 (155.6) 113/16 (47.5) 23/8 (60.3) 31/4 (82.5) 47/8 (123.8) 11/32 (8.7) 11/32 (8.7) 9/16 (14.3) 9/16 (14.3) T 5/16"-18 3/8"-16 1/2"-13 5/8"-11 K in. (mm) H RM RM-D in. (mm) in. (mm) J RM RM-D in. (mm) in. (mm) 11/4 (31.7) 1 (25.4) 11/2 (38.1) 13/4 (44.4) 11/4 (31.7) 113/16 (46.0) 21/2 (63.5) 11/2 (38.1) 21/2 (63.5) 43/8 (111.1) 15/8 (41.3) 23/4 (69.8) 13/16 (20.6) 11/32 (26.2) 11/4 (31.7) 13/8 (34.9) 15/16 (33.3) 19/16 (39.7) 21/4 (57.1) 21/2 (63.5) Vibration Isolation Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 272 B-Line series Pipe Hangers & Supports Vibration Isolation OS Type - Steel Spring Isolator/Restraint - 1" (25.4mm) & 2" (50.8mm) Deflection Use: To support and isolation of vibrations between equipment or frame mounted equipment and the floor or supporting structure. � Neoprene pad 1/4" (6.3mm) thick under spring regardless of style � All OS Type isolator/restraints feature large diameter springs with O.D. not less than 80% of rated deflection height � Adjust load transfer while motion restraint adjustments are loose � For compact support of heavy loads, some OS's include inner springs. For lower profile support of heavy loads when required, OSE's have clustered springs Style V - shown Mounting Holes H diameter Style V Style R Motion W Restraint Adjustment M L Stud D diameter Option P Neoprene Pad Regardless Of Style Style R For Attachment To Side Of Equipment 1" (25.4) Typical Part Numbering Style V - OSE 4 Spring Part Numbers - E Springs - 1" (25.4mm) Deflection Housing Size A B E OSA-(*)-E21(**) OSA-(*)-E55(**) OSA-(*)-E79(**) OSA-(*)-E106(**) OSA-(*)-E143(**) OSA-(*)-E187(**) OSA-(*)-E244(**) OSA-(*)-E318(**) OSA-(*)-E415(**) OSA-(*)-E500(**) OSA-(*)-E633(**) OSA-(*)-E801(**) OSB-(*)-ET255(**) OSB-(*)-ET347(**) OSB-(*)-ET473(**) OSB-(*)-E630(**) OSB-(*)-E806(**) OSB-(*)-E1030(**) OSB-(*)-E1230(**) OSB-(*)-E1430(**) OSB-(*)-E1810(**) OSB-(*)-E2210(**) OSE-(*)-E976(**) OSE-(*)-E1272(**) OSE-(*)-E1660(**) OSE-(*)-E2000(**) OSE-(*)-E2532(**) OSE-(*)-E3204(**) OSE-(*)-E4128(**) (*) Insert Style V or R (**) Insert Option P when required OS A - R - E500 P Type Housing Size Style V or R Spring Number Neoprene Base Option Part Numbers - F Springs - 2" (50.8mm) Deflection Housing Size A B E F OSA-(*)-F33(**) OSB-(*)-FT121(**) OSE-(*)-F332(**) OSF-(*)-F1159(**) OSA-(*)-F43(**) OSB-(*)-FT171(**) OSE-(*)-F480(**) OSF-(*)-F1408(**) OSA-(*)-F59(**) OSB-(*)-FT241(**) OSE-(*)-F620(**) OSF-(*)-F1710(**) OSA-(*)-F83(**) OSB-(*)-F348(**) OSE-(*)-F780(**) OSF-(*)-F2149(**) OSA-(*)-F120(**) OSB-(*)-F453(**) OSE-(*)-F944(**) OSF-(*)-F2700(**) OSA-(*)-F155(**) OSB-(*)-F590(**) OSE-(*)-F1200(**) OSA-(*)-F195(**) OSB-(*)-F676(**) OSA-(*)-F236(**) OSB-(*)-F787(**) OSA-(*)-F300(**) OSB-(*)-F918(**) (*) Insert Style V or R (**) Insert Option P when required Housing Size A B E F L in. (mm) 7 (177.8) 101/2 (266.7) 14 (355.6) 14 (355.6) M in. (mm) 6 (152.4) 9 (228.6) 12 (304.8) 12 (304.8) Dimensions T W in. (mm) 23/4 (69.8) 4 (101.6) 6 (152.4) 6 (152.4) in. (mm) 2 (50.8) 31/2 (88.9) 5 (127.0) 5 (127.0) D in. (mm) 3/8 (9.5) 1/2 (12.7) 5/8 (15.9) 5/8 (15.9) H in. (mm) 9/16 (14.3) 11/16 (17.5) 11/16 (17.5) 11/16 (17.5) Approx. Oper. Height in. (mm) 41/2 (114.3) 51/2 (139.7) 5 (127.0) 8 (203.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 273 Eaton Vibration Isolation Vibration Isolation OS Type - Steel Spring Isolator/Restraint - 3" (76.2mm) Deflection Use: To support and isolation of vibrations between equipment or frame mounted equipment and the floor or supporting structure. � Neoprene pad 1/4" (6.3mm) thick under spring regardless of style � All OS Type isolator/restraints feature large diameter springs with O.D. not less than 80% of rated deflection height � Adjust load transfer while motion restraint adjustments are loose � For compact support of heavy loads, some OS's include inner springs. For lower profile support of heavy loads when required, OSE's have clustered springs Style V - shown Motion Restraint Adjustment Load Transfer Adjustment T Stud D diameter Style V Oper. Height Mounting Holes 11/16" (17.5) diameter W M L 1" (25.4) Style R For Attachment To Opposite Side Of Equipment Option P Neoprene Pad Regardless Of Style Part Numbers - G Springs - 3" (76.2mm) Deflection Housing Size OSB OSF OSB-(*)-3YW162(**) OSB-(*)-G213(**) OSB-(*)-G303(**) OSB-(*)-3YW325(**) OSB-(*)-3YW496(**) OSF-(*)-G853(**) OSF-(*)-3YW1036(**) OSF-(*)-G1223(**) (*) Insert Style V or R (**) Insert Option P when required Typical Part Numbering OS B - V - G213 P Type Housing Size Style V or R Spring Number Neoprene Base Option Housing Size OSB OSF L in. (mm) 101/2 (266.7) 14 (355.6) Dimensions W M in. (mm) 31/2 (88.9) 5 (127.0) in. (mm) 9 (228.6) 12 (304.8) T in. (mm) 4 (101.6) 6 (152.4) D in. (mm) 1/2 (12.7) 5/8 (15.9) Approx. Oper. Height in. (mm) 51/2 (139.7) 8 (203.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 274 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation JQ Type - Isolator/Restraints - 1" (25.4mm) Deflection with California Pre-Approved Seismic Protection OPA-0070 Use: To support and isolation of vibrations between equipment or frame mounted equipment and the floor or supporting structure. Pre-approved for state of California health care projects (OSHPD). Style R JQBX shown � Neoprene pad 1/4" (6.3mm) thick under spring regardless of style � All JQ Type isolator/restraints feature large diameter springs with O.D. not less than 80% of rated deflection height � Adjust load transfer while motion restraint adjustments are loose � For compact support of heavy loads, some JQ include inner springs. For lower profile support of heavy loads when required, JQE's have clustered springs � Housings are HDG with Zinc Plated hardware Springs are Zinc Plated or Powder Coated Mounting Holes 9/16" (14.3) diameter for JQA 11/16" (17.5) diameter for JQB, JQBX, JQE W M L Motion Restraint Adjustment Load Transfer Adjustment T Stud D diameter 1" (25.4) 1" (25.4) Oper. Height JQE 4 Spring Housing JQA, JQB, & JQBX Style V Style R For Attachment To Opposite Side Of Equipment Shear Panels JQBX only Option P Neoprene Pad Regardless Of Style Style Q For Attachment To Opposite Side Of Equipment Part Numbers - E Springs - 1" (25.4mm) Deflection Housing Size JQA JQB JQBX JQE JQA-(*)-E21(**) JQA-(*)-E55(**) JQA-(*)-E79(**) JQA-(*)-E106(**) JQB-(*)-ET255(**) JQB-(*)-ET347(**) JQB-(*)-ET473(**) JQB-(*)-E630(**) JQBX-ET255(*)(**) JQBX-ET347(*)(**) JQBX-ET473(*)(**) JQBX-E630(*)(**) JQE-(*)-E976(**) JQE-(*)-E1272(**) JQE-(*)-E1660(**) JQE-(*)-E2000(**) JQA-(*)-E143(**) JQB-(*)-E806(**) JQBX-E806(*)(**) JQE-(*)-E2532(**) JQA-(*)-E187(**) JQB-(*)-E1030(**) JQBX-E1030(*)(**) JQE-(*)-E3204(**) JQA-(*)-E244(**) JQB-(*)-E1230(**) JQBX-E1230(*)(**) JQE-(*)-E4128(**) JQA-(*)-E318(**) JQB-(*)-E1430(**) JQBX-E1430(*)(**) JQA-(*)-E415(**) JQA-(*)-E500(**) JQA-(*)-E633(**) JQA-(*)-E801(**) JQB-(*)-E1810(**) JQB-(*)-E2210(**) JQBX-E1810(*)(**) JQBX-E2210(*)(**) (*) Insert Style V, R, or Q (**) Insert Option P when required Typical Part Numbering JQ A - R - E500 P Type Housing Size Style V, R, or Q Spring Number Neoprene Base Option OPA-0070 � Pre-Approved Maximum Allowable Loads Housing Size Horizontal Lbs. (kN) Vertical Lbs. (kN) JQA JQB JQBX JQE 800 (3.56) 1000 (4.45) 1500 (6.67) 3200 (14.23) 1660 (7.38) 1600 (7.11) 2000 (8.89) 4300 (19.12) Dimensions Housing Size JQA JQB/JQBX JQE L in. (mm) 7 (177.8) 101/2 (266.7) 14 (355.6) W in. (mm) 2 (50.8) 31/2 (88.9) 5 (127.0) M T in. (mm) 6 (152.4) 9 (228.6) 12 (304.8) in. (mm) 23/4 (69.8) 4 (101.6) 6 (152.4) D in. (mm) 3/8 (9.5) 1/2 (12.7) 5/8 (15.9) Approx. Oper. Height in. (mm) 41/2 (114.3) 51/2 (139.7) 5 (127.0) Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 275 Eaton Vibration Isolation JQ Type - Isolator/Restraints - 2" (50.8mm) Deflection with California Pre-Approved Seismic Protection OPA-0070 Use: To support and isolation of vibrations between equipment or frame mounted equipment and the floor or supporting structure. Pre-approved for state of California health care projects (OSHPD). � Neoprene pad 1/4" (6.3mm) thick under spring regardless of style � All JQ Type isolator/restraints feature large diameter springs with O.D. not less than 80% of rated deflection height Front and Rear Shear Panels JQBX only Style R JQBX shown � Adjust load transfer while motion restraint adjustments are loose � For compact support of heavy loads, some JQ include inner springs. For lower profile support of heavy loads when required, JQE's have clustered springs W � Housings are HDG with Zinc Plated hardware Springs are Zinc Plated or Powder Coated Mounting Holes 9/16" (14.3) diameter for JQA 11/16" (17.5) diameter for JQB, JQBX, JQE, JQF M L Style R For Attachment To Side Of Equipment 1" (25.4) Motion Restraint Adjustment Stud D diameter T Oper. Height Option P Neoprene Pad Regardless Of Style JQE 4 Spring Housing JQA, JQB, JQBX, JQE, & JQF Style V Part Numbers - F Springs - 2" (50.8mm) Deflection Housing Size JQA JQB*** JQE JQF JQA-(*)-F33(**) JQA-(*)-F43(**) JQA-(*)-F59(**) JQA-(*)-F83(**) JQA-(*)-F120(**) JQA-(*)-F155(**) JQA-(*)-F195(**) JQA-(*)-F236(**) JQA-(*)-F300(**) JQB_-(*)-FT121(**) JQE_-(*)-F332(**) JQB_-(*)-FT171(**) JQE_-(*)-F480(**) JQB_-(*)-FT241(**) JQE_-(*)-F620(**) JQB_-(*)-F348(**) JQE_-(*)-F780(**) JQB_-(*)-F453(**) JQE_-(*)-F944(**) JQB_-(*)-F590(**) JQE_-(*)-F1200(**) JQB_-(*)-F676(**) JQB_-(*)-F787(**) JQB_-(*)-F918(**) JQF-(*)-F1159(**) JQF-(*)-F1408(**) JQF-(*)-F1710(**) JQF-(*)-F2149(**) JQF-(*)-F2700(**) (*) Insert Style V or R (**) Insert Option P when required *** Leave blank for JQB style or insert X in part number for JQBX style Dimensions Typical Part Numbering JQ A - R - F236 P Type Housing Size Style V or R Spring Number Neoprene Base Option OPA-0070 � Pre-Approved Maximum Allowable Loads Housing Size Horizontal Lbs. (kN) Vertical Lbs. (kN) JQA JQB JQBX JQE JQF 800 (3.56) 1000 (4.45) 1500 (6.67) 3200 (14.23) 2900 (12.90) 1660 (7.38) 1600 (7.11) 2000 (8.89) 4300 (19.12) 4000 (17.79) Housing Size JQA JQB/JQBX JQE JQF L W in. (mm) 7 (177.8) 101/2 (266.7) 14 (355.6) 14 (355.6) in. (mm) 2 (50.8) 31/2 (88.9) 5 (127.0) 5 (127.0) M T in. (mm) 6 (152.4) 9 (228.6) 12 (304.8) 12 (304.8) in. (mm) 23/4 (69.8) 4 (101.6) 6 (152.4) 6 (152.4) D in. (mm) 3/8 (9.5) 1/2 (12.7) 5/8 (15.9) 5/8 (15.9) Approx. Oper. Height in. (mm) 41/2 (114.3) 51/2 (139.7) 5 (127.0) 8 (203.2) Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 276 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation JQ Type - Isolator/Restraints - 3" (76.2mm) Deflection with California Pre-Approved Seismic Protection OPA-0070 Use: For compact support or low profile support of heavy loads. Pre-approved for state of California health care projects (OSHPD). � Neoprene pad 1/4" (6.3mm) thick under spring regardless of style � All JQ Type isolator/restraints feature large diameter springs with O.D. not less than 80% of rated deflection height Style R JQBX shown � Adjust load transfer while motion restraint adjustments are loose � Housings are HDG with Zinc Plated hardware Springs are Zinc Plated or Powder Coated Load Transfer Adjustment Mounting Holes 11/16" (17.5) diameter for JQB, JQBX, JQF W Stud T Load Transfer D diameter M Adjustment L Oper. Height JQB, JQBX, & JQF Style V Style R For Attachment To Opposite Side Of Equipment 1" (25.4) Style Q For Attachment To Opposite Side Of Equipment 1" (25.4) Shear Panels JQBX only Option P Neoprene Pad Regardless Of Style Part Numbers - G Springs - 3" (76.2mm) Deflection Housing Size JQB JQBX JQF JQB-(*)-3YW162(**) JQBX-(*)-3YW162(**) JQF-(*)-G853(**) JQB-(*)-G213(**) JQBX-(*)-G213(**) JQF-(*)-3YW1036(**) JQB-(*)-G303(**) JQBX-(*)-G303(**) JQF-(*)-G1223(**) JQB-(*)-3YW325(**) JQBX-(*)-3YW325(**) JQB-(*)-3YW496(**) JQBX-(*)-3YW496(**) (*) Insert Style V, R, or Q (**) Insert Option P when required Typical Part Numbering JQ B - V - G213 P Type Housing Size Style V, R, or Q Spring Number Neoprene Base Option OPA-0070 � Pre-Approved Maximum Allowable Loads Housing Size Horizontal Lbs. (kN) Vertical Lbs. (kN) JQB JQBX JQF 1000 (4.45) 1500 (6.67) 2900 (12.90) 1600 (7.11) 2000 (8.89) 4000 (17.79) Housing Size JQB/JQBX JQF Dimensions L W M in. (mm) 101/2 (266.7) 14 (355.6) in. (mm) 31/2 (88.9) 5 (127.0) in. (mm) 9 (228.6) 12 (304.8) T in. (mm) 4 (101.6) 6 (152.4) D in. (mm) 1/2 (12.7) 5/8 (15.9) Approx. Oper. Height in. (mm) 51/2 (139.7) 8 (203.2) Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 277 Eaton Vibration Isolation JQ-TQN Type - Top Quality Neoprene Isolator/Restraints - 1/2" (12.7mm) Deflection with California Pre-Approved Seismic Protection OPA-0070 Use: For support of light equipment or framed equipment and isolation with a cushion to prevent vibration transference to structure. Pre-approved for state of California health care projects (OSHPD). � Adjust load transfer while motion restraint adjustments are loose � Housings are HDG with Zinc Plated hardware JQAM TQN 55 Style V shown Style V Style R Panel JQBX TQN 520 Style R shown R Style JQE TQN 4200 Style V shown Panel Panels JQB No JQBX Yes Mounting Holes 9/16" (14.3) diameter for AM 11/16" (17.5) diameter for B, BX, E Load Transfer Nut W M Seismic Restraint Adjustment L Style V Load Transfer Styles Style R F Stud D diameter Oper. Height TQN Top Quality Neoprene Vibration Isolation Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 278 B-Line series Pipe Hangers & Supports Vibration Isolation JQ-TQN Type - Top Quality Neoprene Isolator/Restraints - 1/2" (12.7mm) Deflection con't. with California Pre-Approved Seismic Protection OPA-0070 1/2" (12.7mm) Rated Static Deflection Part Maximum No. Load in. (mm) JQAMTQN-(*)-40 JQAMTQN-(*)-55 JQAMTQN-(*)-80 JQAMTQN-(*)-120 JQAMTQN-(*)-200 JQAMTQN-(*)-280 JQAMTQN-(*)-400 40 (0.18) 55 (0.25) 80 (0.35) 120 (0.53) 200 (0.89) 280 (1.24) 400 (1.78) JQBTQN-(*)-300 JQBTQN-(*)-520 JQBTQN-(*)-750 JQBTQN-(*)-1100 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) JQBXTQN-(*)-300 JQBXTQN-(*)-520 JQBXTQN-(*)-750 JQBXTQN-(*)-1100 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) JQETQN-(*)-1800 JQETQN-(*)-3000 JQETQN-(*)-5000 1800 (8.00) 3000 (13.34) 5000 (22.24) (*) Insert Style V or R Color Code Yellow Green Blue Orange Yellow Green Blue Yellow Green Blue White Yellow Green Blue White Green Blue White Typical Part Numbering JQ AM TQN - V - 200 Type Housing Size TQN Isolator Style V or R Load Rating OPA-0070 � Pre-Approved Maximum Allowable Loads Housing Size Horizontal Lbs. (kN) Vertical Lbs. (kN) AM 600 (2.67) 900 (4.00) B 1000 (4.45) 1600 (7.11) BX 1500 (6.67) 2000 (8.89) E 3200 (14.23) 4300 (19.13) Housing Size AM B / BX E Dimensions L W M F in. (mm) 7 (177.8) 101/2 (266.7) 14 (355.6) in. (mm) 2 (50.8) 31/2 (88.9) 5 (127.0) in. (mm) 6 (152.4) 9 (228.6) 12 (304.8) in. (mm) 23/4 (69.8) 4 (101.6) 6 (152.4) D in. (mm) 3/8 (9.5) 1/2 (12.7) 5/8 (15.9) Approx. Oper. Height in. (mm) 23/4 (69.8) 5 (127.0) 5 (127.0) Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 279 Eaton Vibration Isolation RQ & RQD Type - Neoprene Mount with Integrak Seismic Restraints Use: For support of light equipment or framed light equipment while preventing transfer of vibration to structure. Neoprene Washer R - Rod Size RQ B C D H J No Metal To Metal Contact A L RQD Typical Part Numbering RQ - A130 Type Mount Number 1/4" (6.3mm) Maximum Deflection Part Maximum No. Load Lbs. (kN) RQ-A40 RQ-A55 RQ-A80 RQ-A130 40 (0.18) 55 (0.25) 80 (0.35) 130 (0.58) RQ-B120 RQ-B200 RQ-B280 RQ-B400 120 (0.53) 200 (0.89) 280 (1.24) 400 (1.78) RQ-C300 RQ-C520 RQ-C750 RQ-C1100 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) Color Code Orange Yellow Green Blue Orange Yellow Green Blue Yellow Green Blue White 1/2" (12.7mm) Maximum Deflection Part Maximum No. Load Lbs. (kN) RQD-A40 RQD-A55 RQD-A80 RQD-A130 40 (0.18) 55 (0.25) 80 (0.35) 130 (0.58) RQD-B120 RQD-B200 RQD-B280 RQD-B400 120 (0.53) 200 (0.89) 280 (1.24) 400 (1.78) RQD-C300 RQD-C520 RQD-C750 RQD-C1100 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) Color Code Orange Yellow Green Blue Orange Yellow Green Blue Yellow Green Blue White Neoprene Type A in. (mm) B in. (mm) C in. (mm) RQ-A RQ-B RQ-C 31/2 (88.9) 45/16 (109.5) 5 (127.0) 2 (50.8) 21/2 (63.5) 31/4 (82.5) 1 (25.4) 11/4 (31.7) 15/8 (41.3) RQD-A 31/2 (88.9) 2 (50.8) 1 (25.4) RQD-B 45/16 (109.5) 21/2 (63.5) 11/4 (31.7) RQD-C 5 (127.0) 31/4 (82.5) 15/8 (41.3) Type RQ: Single Deflection (1/4" (6.3mm) Maximum) Type RQD: Double Deflection (1/2" (12.7mm) Maximum) Dimensions D in. (mm) 7/16 (11.1) 9/16 (14.3) 11/16 (17.5) 7/16 (11.1) 9/16 (14.3) 11/16 (17.5) L in. (mm) 41/2 (114.3) 53/8 (136.5) 63/16 (157.2) 41/2 (114.3) 53/8 (136.5) 63/16 (157.2) J in. (mm) 1 (25.4) 11/2 (38.1) 17/8 (47.6) 1 (25.4) 11/2 (38.1) 17/8 (47.6) R 3/8"-16 5/8"-11 3/4"-10 3/8"-16 5/8"-11 3/4"-10 H in. (mm) 2 (50.8) 23/4 (69.8) 33/8 (85.7) 2 (50.8) 23/4 (69.8) 33/8 (85.7) Vibration Isolation Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 280 B-Line series Pipe Hangers & Supports Reference Tables Vibration Isolation For use in selecting hangers for standard pipe Nominal Pipe Size in. (mm) 3/4 (20) 1 (25) 11/4 (32) 11/2 (40) 2 (50) 21/2 (65) 3 (80) 31/2 (90) 4 (100) 41/2 (115) 5 (125) 6 (150) 7 (175) 8 (200) 9 (225) 10 (250) 12 (300) Weight Per Foot (25.4mm) Standard Pipe Dry or Steam Water Filled Filled lbs. (kg) lbs. (kg) 1.13 (0.51) 1.68 (0.76) 2.28 (1.03) 2.73 (1.24) 3.68 (1.67) 5.82 (2.64) 7.62 (3.45) 9.20 (4.17) 10.89 (4.94) 12.64 (5.73) 14.81 (6.72) 19.18 (8.70) 24.05 (10.91) 28.60 (12.97) 33.90 (15.38) 40.50 (18.37) 49.60 (22.50) 1.36 2.06 2.93 3.62 5.15 7.91 10.85 13.52 16.45 19.50 23.55 31.80 40.85 50.50 61.10 75.00 99.00 (0.61) (0.93) (1.33) (1.64) (2.33) (3.59) (4.92) (6.13) (7.46) (8.84) (10.68) (14.42) (18.53) (22.90) (27.71) (24.02) (44.90) Hanger Selection Load 10' (3.05m) Spacing lbs. (kN) 21 (0.09) 55 (0.24) 55 (0.24) 55 (0.24) 79 (0.35) 143 (0.63) 143 (0.63) 187 (0.83) 244 (1.08) 244 (1.08) 318 (1.41) 415 (1.84) 500 (2.22) 715 (3.18) 1060 (4.71) 1060 (4.71) 1430 (6.36) Selection based on water filled pipe only. Add weight of fittings if any and reselect. 125# Cast Iron pipe fitting approximate weights Nominal Pipe Size in. (mm) 11/2 (40) 2 (50) 21/2 (65) 3 (80) 4 (100) 5 (125) 6 (150) 8 (200) 10 (250) 12 (300) Strainer lbs. (kg) 20 (9.1) 30 (13.6) 40 (18.1) 50 (22.7) 85 (38.5) 110 (49.9) 140 (63.5) 205 (93.0) 330 (149.7) 440 (199.6) Check Valve lbs. (kg) 25 (11.3) 25 (11.3) 35 (15.9) 45 (20.4) 80 (36.3) 120 (54.4) 155 (70.3) 305 (138.3) 455 (206.4) 675 (306.2) Gate Valve lbs (kg) 30 (13.6) 40 (18.1) 50 (22.7) 70 (31.7) 110 (49.9) 140 (63.5) 415 (1.84) 250 (113.4) 475 (215.4) 690 (313.0) Elbow lbs (kg) 15 (6.8) 20 (9.1) 25 (11.3) 30 (13.6) 55 (24.9) 70 (31.7) 90 (40.8) 120 (54.4) 245 (111.1) 375 (54.4) Tee lbs (kg) 20 (9.1) 25 (11.3) 35 (15.9) 40 (18.1) 70 (31.7) 90 (40.8) 115 (52.1) 175 (79.4) 295 (133.8) 405 (183.7) For 250# fittings, multiply above values by 1.8. Flange lbs (kg) 3.5 (1.6) 6 (2.7) 8 (3.6) 9 (4.1) 16 (7.2) 20 (9.1) 25 (11.3) 34 (15.4) 53 (24.0) 71 (32.2) Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 281 Eaton Vibration Isolation RH & RHD Type - Neoprene Hanger Use: Used to dampen noise and vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems. � *Type RH: Single deflection - 1/4" (6.3mm) maximum � **Type RHD: Double deflection - 1/2" (12.7mm) maximum � MRD is maximum rod diameter � Housing finish: Zinc Plated � Threaded rods, nuts, and washers are furnished separately RHD-B shown 3/4"-10 MRD RHD-E shown 63/8" (161.9) 43/4" (120.6) C5x6.7# 1"-8 MRD *11/4" (31.7) **13/4" (44.4) 23/4" (69.8) 21/2" (63.5) RH Type 3/8"-16 MRD *1" (25.4) RH-A & RHD-A shown **11/2" (38.1) 31/4" (82.5) 21/2" (63.5) 13/4" (44.4) 51/2" (139.7) 6" (152.4) RHD Type 7/8"-9 MRD *11/2" (38.1) RH-C & RHD-C shown **21/2" (63.5) 51/4" (133.1) 33/4" (95.2) 3" (76.2) 1/4" (6.3mm) Maximum Single Deflection Part Number Maximum Load lbs. (kN) Color Code RH-40-A RH-55-A RH-80-A RH-130-A RH-120-B RH-200-B RH-280-B RH-400-B RH-300-C RH-520-C RH-750-C RH-1100-C 40 (0.18) 55 (0.25) 80 (0.35) 130 (0.58) 120 (0.53) 200 (0.89) 280 (1.24) 400 (1.78) 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) Yellow Green Blue White Orange Yellow Green Blue Yellow Green Blue White Typical Part Numbering Type Load Rating Size RH - 280 - B 1/2" (12.7mm) Maximum Double Deflection Part Number Maximum Load lbs. (kN) Color Code RHD-40-A RHD-55-A RHD-80-A RHD-130-A RHD-120-B RHD-200-B RHD-280-B RHD-400-B RHD-300-C RHD-520-C RHD-750-C RHD-1100-C RHD-1700-E RHD-2700-E RHD-4200-E 40 (0.18) 55 (0.25) 80 (0.35) 130 (0.58) 120 (0.53) 200 (0.89) 280 (1.24) 400 (1.78) 300 (1.33) 520 (2.31) 750 (3.33) 1100 (4.89) 1700 (7.56) 2700 (12.01) 4200 (18.68) Yellow Green Blue White Orange Yellow Green Blue Yellow Green Blue White Green Blue White Vibration Isolation Eaton 282 B-Line series Pipe Hangers & Supports Vibration Isolation CHSCS Type - Spring Hanger with Seismic Cushion Stop - 1" (25.4mm) Deflection Use: Used to dampen noise and vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems. � All housing sizes have been tested to carry five times the maximum load without failure � Spring rated deflection is 1" (25.4mm) � SFH = Free Height � Threaded rod, nuts, and washers supplied separately Light Weight Hanger CHSCS-E21 thru CHSCS-E415 Seismic Cushion Stop (SCS) W L Upper Long Life Rubber Cushion Basic Hanger CHSCS-E500 thru CHSCS-E1060 Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion L W *Extra Strength Hanger CHSCS-E1580 thru CHSCS-E2860 Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion S D S Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate D S W Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion D Bonded To Steel Plate L Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Typical Part Numbering CHSCS - E143 Type Load Dimensions Part Number CHSCS-E21 CHSCS-E55 CHSCS-E79 CHSCS-E106 CHSCS-E143 CHSCS-E187 CHSCS-E244 CHSCS-E318 CHSCS-E415 CHSCS-E500 CHSCS-715 CHSCS-1060 CHSCS-1430 * CHSCS-2120 * CHSCS-2860 * Maximum Load lbs. (kN) 21 (0.09) 55 (0.24) 79 (0.35) 106 (0.47) 143 (0.63) 187 (0.83) 244 (1.08) 318 (1.41) 415 (1.84) 500 (2.22) 715 (3.18) 1060 (4.71) 1430 (6.36) 2120 (9.43) 2860 (12.72) SFH in. (mm) 25/8 (66.7) 23/4 (69.8) 25/8 (66.7) 25/8 (66.7) 25/8 (66.7) 25/8 (66.7) 23/4 (69.8) 31/8 (79.4) 31/16 (77.8) 31/4 (82.5) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) S in. (mm) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 71/2 (190.5) 71/2 (190.5) 71/2 (190.5) 83/8 (212.7) 83/8 (212.7) 83/8 (212.7) W L in. (mm) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 31/4 (82.5) 31/4 (82.5) 31/4 (82.5) 6 (152.4) 6 (152.4) 6 (152.4) in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 6 (152.4) 6 (152.4) 6 (152.4) SCS Diameter in. (mm) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) D Diameter 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 * Housings are specially reinforced for extra strength Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 283 Eaton Vibration Isolation CHSCS Type - Spring Hanger with Seismic Cushion Stop - 2" (50.8mm) Deflection Use: Used to dampen noise and vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems. � All housing sizes have been tested to carry five times the maximum load without failure � Spring rated deflection is 2" (50.8mm) � SFH = Free Height � Threaded rod, nuts, and washers supplied separately *Extra Strength Hanger CHSCS-F1159 thru CHSCS-F3420 Basic Hanger CHSCS-F59 thru CHSCS-F918 Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion L W Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion S S Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion D Bonded To Steel Plate Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion D Bonded To Steel Plate L W Typical Part Numbering CHSCS - F120 Type Load Dimensions Part Number CHSCS-F59 CHSCS-F83 CHSCS-F120 CHSCS-F155 CHSCS-F195 CHSCS-F241 CHSCS-F348 CHSCS-F453 CHSCS-F590 CHSCS-F676 CHSCS-F787 CHSCS-F918 CHSCS-F1159 * CHSCS-F1408 * CHSCS-F1710 * CHSCS-F2318 * CHSCS-F2816 * CHSCS-F3420 * Maximum Load lbs. (kN) 59 (0.26) 83 (0.37) 120 (0.53) 155 (0.69) 195 (0.87) 241 (1.07) 348 (1.55) 453 (2.01) 590 (2.62) 676 (3.00) 787 (3.50) 918 (4.08) 1159 (5.15) 1408 (6.26) 1710 (7.60) 2318 (10.31) 2816 (12.52) 3420 (15.21) SFH S in. (mm) in. (mm) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 49/16 (115.9) 41/2 (114.3) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 10 (254.0) 5 (127.0) 10 (254.0) 5 (127.0) 10 (254.0) 5 (127.0) 11 (279.4) 5 (127.0) 11 (279.4) 5 (127.0) 11 (279.4) 5 (127.0) 67/16 (163.5) 67/16 (163.5) 67/16 (163.5) 67/16 (163.5) 67/16 (163.5) 67/16 (163.5) 11 (279.4) 11 (279.4) 11 (279.4) 11 (279.4) 111/4 (285.7) 111/4 (285.7) 111/4 (285.7) W in. (mm) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 51/2 (139.7) 51/2 (139.7) 51/2 (139.7) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 6 (152.9) 6 (152.9) 6 (152.9) 11 (279.4) 11 (279.4) 11 (279.4) L in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) SCS Diameter in. (mm) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) D Diameter 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 * Housings are specially reinforced for extra strength Vibration Isolation Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 284 B-Line series Pipe Hangers & Supports Vibration Isolation CH30SCS Type - 15� Tilt, 1" (25.4mm) Deflection Combination Hanger - Spring & Neoprene with Seismic Cushion Stop Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation. At rated load the hanger rod will operate to a full 15� tilt in any direction from vertical centerline. � All housing sizes have been tested to carry five times the maximum load without failure � Spring rated deflection is 1" (25.4mm) � SFH = Free Height � Threaded rod, nuts, and washers supplied separately *Extra Strength Hanger CH30SCS-E1612 thru CH30SCS-E4920 SCS (T) Light Weight Hanger CH30SCS-ET20 thru CH30SCS-ET255 Basic Hanger CH30SCS-ET347 thru CH30SCS-ET1326 SCS (T) SCS (T) See Neoprene Sleeve Detail S S SCS (B) S See Neoprene SCS Sleeve Detail (B) L W D LW D L SCS (B) W D Spring Channel Spring Steel Washer Hanger Rod Vertical Centerline Neoprene Sleeve Neoprene Sleeve Detail Neoprene Sleeve Hanger Rod Vertical Centerline Neoprene Sleeve Detail Dimensions Typical Part Numbering CH30SCS - ET129 Type Load SCS (T) = Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion SCS (B) = Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Part Number CH30SCS-ET20 CH30SCS-ET42 CH30SCS-ET80 CH30SCS-ET129 CH30SCS-ET194 CH30SCS-ET255 CH30SCS-ET347 CH30SCS-ET473 CH30SCS-ET667 CH30SCS-ET940 CH30SCS-ET1326 CH30SCS-E1612 * CH30SCS-E2060 * CH30SCS-E2460 * CH30SCS-E2980 * CH30SCS-E4120 * CH30SCS-E4920 * Maximum Load lbs. (kN) 20 (0.09) 42 (0.18) 80 (0.35) 129 (0.57) 194 (0.86) 255 (1.13) 347 (1.54) 473 (2.10) 667 (2.96) 940 (4.18) 1326 (5.90) 1612 (7.17) 2060 (9.16) 2460 (10.94) 2980 (13.25) 4120 (18.32) 4920 (21.88) SFH in. (mm) 17/8 (47.6) 2 (50.8) 21/8 (54.0) 23/8 (60.3) 23/8 (60.3) 21/2 (63.5) 23/4 (69.8) 27/8 (73.0) 31/8 (79.4) 33/8 (85.7) 35/8 (92.1) 35/8 (92.1) 37/8 (98.4) 41/8 (104.8) 41/8 (104.8) 37/8 (98.4) 41/8 (104.8) S W in. (mm) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 6 (152.9) 6 (152.9) 7 (177.8) 7 (177.8) 7 (177.8) 81/4 (209.5) 81/4 (209.5) 81/4 (209.5) 81/4 (209.5) 81/2 (215.9) 81/2 (215.9) in. (mm) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 55/16 (134.9) 55/16 (134.9) 57/8 (149.2) 57/8 (149.2) 57/8 (149.2) 10 (254.0) 10 (254.0) 10 (254.0) 10 (254.0) 91/2 (241.3) 91/2 (241.3) * Housings are specially reinforced for extra strength L in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 41/4 (107.9) 41/4 (107.9) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 7 (177.8) 7 (177.8) SCS Diameter in. (mm) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 4 (101.6) 4 (101.6) D Diameter 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 11/8"-7 11/8"-7 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 285 Eaton Vibration Isolation Vibration Isolation CH30SCS Type - 15� Tilt, 2" (50.8mm) Deflection Spring Hanger with Seismic Cushion Stop Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation. At rated load the hanger rod will operate to a full 15� tilt in any direction from vertical centerline. � All housing sizes have been tested to carry five times the maximum load without failure � Spring rated deflection is 2" (50.8mm) � SFH = Free Height � Threaded rod, nuts, and washers supplied separately *Extra Strength Hanger CH30SCS-F696 thru CH30SCS-F3420 SCS (T) Basic Hanger CH30SCS-FT30 thru CH30SCS-F590 SCS (T) S S See Neoprene Sleeve Detail L SCS (B) W D See Neoprene Sleeve Detail Spring L Channel SCS (B) W D Spring Steel Washer Hanger Rod Vertical Centerline Neoprene Sleeve Neoprene Sleeve Detail Neoprene Sleeve Hanger Rod Vertical Centerline Neoprene Sleeve Detail Dimensions Typical Part Numbering CH30SCS - FT121 Type Load SCS (T) = Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion SCS (B) = Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Part Number Maximum Load lbs. (kN) SFH in. (mm) S in. (mm) W in. (mm) CH30SCS-FT30 CH30SCS-FT41 CH30SCS-FT60 CH30SCS-FT85 CH30SCS-FT121 CH30SCS-FT171 CH30SCS-FT241 CH30SCS-F348 CH30SCS-F453 CH30SCS-F590 CH30SCS-F696 * CH30SCS-F906 * CH30SCS-F1180 * CH30SCS-F1352 * CH30SCS-F1574 * CH30SCS-F1836 * CH30SCS-F2318 * CH30SCS-F2816 * CH30SCS-F3420 * 30 (0.13) 41 (0.18) 60 (0.26) 85 (0.38) 121 (0.54) 171 (0.76) 241 (1.07) 348 (1.55) 453 (2.01) 590 (2.62) 696 (3.09) 906 (4.03) 1180 (5.25) 1352 (6.01) 1574 (7.00) 1836 (8.16) 2318 (10.31) 2816 (12.52) 3420 (15.21) 31/2 (88.9) 31/2 (88.9) 33/4 (95.2) 33/4 (95.2) 4 (101.6) 41/4 (107.9) 41/2 (114.3) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 8 (203.2) 8 (203.2) 8 (203.2) 8 (203.2) 8 (203.2) 8 (203.2) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 111/2 (292.1) 111/2 (292.1) 111/2 (292.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 5 (127.0) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 123/8 (314.3) 123/8 (314.3) 123/8 (314.3) * Housings are specially reinforced for extra strength L in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 4 (101.6) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 5 (127.0) 5 (127.0) 5 (127.0) SCS Diameter in. (mm) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 4 (101.6) 4 (101.6) 4 (101.6) D Diameter 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 286 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation HHSCS Type - Combination Hanger Spring & Neoprene with Seismic Cushion Stop 11/2" (38.1mm) Deflection Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation. At rated load the hanger rod will operate to a full 15� tilt in any direction from vertical centerline. � All housing sizes have been tested to carry five times the maximum load without failure � Spring rated deflection is 2" (50.8mm) + neoprene rated deflection is 1/2" (12.7mm) = 21/2" (63.5mm) � SFH = Free Height NFH = Neoprene Free Height � Threaded rod, nuts, and washers supplied separately � Minimum additional travel is 50% of rated deflection at rated load *Extra Strength Hanger HHSCS-E1580 thru HHSCS-E2860 Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion Basic Hanger HHSCS-E21 thru HHSCS-E1060 Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion L W Deflection Indicator Option I S W L Deflection S Indicator Option I Pre-Compression Plate, Rod, Nuts, and Washers Option R D Typical Part Numbering Pre-Compression Plate, Rod, Nuts, and Washers D Option R HHSCS E106 R I Type Spring Load Pre-Compression Option Deflector Indicator Option Dimensions Part Number HHSCS-E21-R I HHSCS-E55-R I HHSCS-E79-R I HHSCS-E106-R I HHSCS-E143-R I HHSCS-E187-R I HHSCS-E244-R I HHSCS-E318-R I HHSCS-E415-R I HHSCS-E500-R I HHSCS-715-R I HHSCS-1060-R I HHSCS-1430-R I * HHSCS-2120-R I * HHSCS-2860-R I * Maximum Load lbs. (kN) 21 (0.09) 55 (0.24) 79 (0.35) 106 (0.47) 143 (0.63) 187 (0.83) 244 (1.08) 318 (1.41) 415 (1.84) 500 (2.22) 715 (3.18) 1060 (4.71) 1430 (6.36) 2120 (9.43) 2860 (12.72) SFH in. (mm) 25/8 (66.7) 23/4 (69.8) 25/8 (66.7) 25/8 (66.7) 25/8 (66.7) 25/8 (66.7) 23/4 (69.8) 31/8 (79.4) 31/16 (77.8) 31/4 (82.5) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) NFH S in. (mm) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) in. (mm) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 71/2 (190.5) 71/2 (190.5) 71/2 (190.5) 71/2 (190.5) 93/4 (247.6) 93/4 (247.6) 93/4 (247.6) 113/8 (289.9) 113/8 (289.9) 113/8 (289.9) W in. (mm) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 31/4 (82.5) 31/4 (82.5) 31/4 (82.5) 31/4 (82.5) 37/8 (98.4) 37/8 (98.4) 37/8 (98.4) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) L in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 31/4 (82.5) 31/4 (82.5) 31/4 (82.5) 6 (152.4) 6 (152.4) 6 (152.4) SCS Diameter 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) Insert R for Option R (Pre-Compression Hardware) when required and I for Option I (deflection indicator) when required. * Housings are specially reinforced for extra strength D Diameter 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 287 Eaton Vibration Isolation HHSCS Type - Combination Hanger Spring & Neoprene with Seismic Cushion Stop 21/2" (63.5mm) Deflection Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation. At rated load the hanger rod will operate to a full 15� tilt in any direction from vertical centerline. � All housing sizes have been tested to carry five times the maximum load without failure � Spring rated deflection is 2" (50.8mm) + neoprene rated deflection is 1/2" (12.7mm) = 21/2" (63.5mm) � SFH = Free Height NFH = Neoprene Free Height � Threaded rod, nuts, and washers supplied separately � Minimum additional travel is 50% of rated deflection at rated load *Extra Strength Hanger HHSCS-F1159 thru HHSCS-F3420 Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion Basic Hanger HHSCS-F59 thru HHSCS-F918 L S Seismic Cushion W Stop (SCS) Upper Long Life Rubber Cushion Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Eaton S D L W Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Typical Part Numbering HHSCS - F120 Type Load D Dimensions Part Number Maximum Load lbs. (kN) SFH in. (mm) NFH in. (mm) S in. (mm) HHSCS-F59 HHSCS-F83 HHSCS-F120 HHSCS-F155 HHSCS-F195 HHSCS-F241 HHSCS-F348 HHSCS-F453 HHSCS-F590 HHSCS-F676 HHSCS-F787 HHSCS-F918 HHSCS-F1159 * HHSCS-F1408 * HHSCS-F1710 * HHSCS-F2318 * HHSCS-F2816 * HHSCS-F3420 * 59 (0.26) 83 (0.37) 120 (0.53) 155 (0.69) 195 (0.87) 241 (1.07) 348 (1.55) 453 (2.01) 590 (2.62) 676 (3.00) 787 (3.50) 918 (4.08) 1159 (5.15) 1408 (6.26) 1710 (7.60) 2318 (10.31) 2816 (12.52) 3420 (15.21) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/4 (107.9) 41/2 (114.3) 41/2 (114.3) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 63/8 (161.9) 63/8 (161.9) 63/8 (161.9) 63/8 (161.9) 63/8 (161.9) 63/8 (161.9) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 9 (228.6) 10 (254.0) 10 (254.0) 10 (254.0) 11 (279.4) 11 (279.4) 11 (279.4) 11 (279.4) 11 (279.4) 11 (279.4) 11 (279.4) 111/4 (285.7) 111/4 (285.7) 111/4 (285.7) * Housings are specially reinforced for extra strength W in. (mm) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 51/2 (139.7) 51/2 (139.7) 51/2 (139.7) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 6 (152.9) 6 (152.9) 6 (152.9) 11 (279.4) 11 (279.4) 11 (279.4) L in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) SCS Diameter in. (mm) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) D Diameter 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 288 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation HH30SCS Type - 15� Tilt, 11/2" (38.1mm) Deflection Combination Hanger - Spring & Neoprene with Seismic Cushion Stop Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation. At rated load the hanger rod will operate to a full 15� tilt in any direction from vertical centerline. � All housing sizes have been tested to carry five times the maximum load without failure * Extra Strength Hanger HH30SCS-E1612 thru HH30SCS-E4920 � Spring rated deflection is 1" (25.4mm) + neoprene rated deflection is 1/2" (12.7mm) = 11/2" (38.1mm) � SFH = Free Height NFH = Neoprene Free Height � Threaded rod, nuts, and washers supplied separately� Minimum additional travel is 50% of rated deflection at rated load Basic Hanger S HH30SCS-ET20 thru HH30SCS-ET1326 SCS (T) Neoprene S Neoprene SCS (T) L SCS (B) Spring Steel Washer See Neoprene Sleeve Detail D W Hanger Rod Vertical Centerline Neoprene Sleeve Neoprene Sleeve Detail Spring See Neoprene Sleeve Detail Channel Neoprene Sleeve Hanger Rod Vertical Centerline Neoprene Sleeve Detail Dimensions W SCS L (B) D Typical Part Numbering HH30SCS - ET129 Type Load SCS (T) = Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion SCS (B) = Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Part Number HH30SCS-ET20 HH30SCS-ET42 HH30SCS-ET80 HH30SCS-ET129 HH30SCS-ET194 HH30SCS-ET255 HH30SCS-ET347 HH30SCS-ET473 HH30SCS-ET667 HH30SCS-ET940 HH30SCS-ET1326 HH30SCS-E1612 * HH30SCS-E2060 * HH30SCS-E2460 * HH30SCS-E2980 * HH30SCS-E4120 * HH30SCS-E4920 * Maximum Load lbs. (kN) 20 (0.09) 42 (0.18) 80 (0.35) 129 (0.57) 194 (0.86) 255 (1.13) 347 (1.54) 473 (2.10) 667 (2.96) 940 (4.18) 1326 (5.90) 1612 (7.17) 2060 (9.16) 2460 (10.94) 2980 (13.25) 4120 (18.32) 4920 (21.88) SFH in. (mm) 17/8 (47.6) 2 (50.8) 21/8 (54.0) 23/8 (60.3) 23/8 (60.3) 21/2 (63.5) 23/4 (69.8) 27/8 (73.0) 31/8 (79.4) 33/8 (85.7) 35/8 (92.1) 35/8 (92.1) 37/8 (98.4) 41/8 (104.8) 41/8 (104.8) 37/8 (98.4) 41/8 (104.8) NFH S W in. (mm) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) in. (mm) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 71/2 (190.5) 71/2 (190.5) 81/2 (215.9) 81/2 (215.9) 10 (254.0) 10 (254.0) 10 (254.0) 111/4 (285.7) 111/4 (285.7) 111/4 (285.7) 111/4 (285.7) 12 (304.8) 12 (304.8) in. (mm) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 35/8 (92.1) 4 (101.6) 4 (101.6) 55/16 (134.9) 55/16 (134.9) 57/8 (149.2) 57/8 (149.2) 57/8 (149.2) 10 (254.0) 10 (254.0) 10 (254.0) 10 (254.0) 91/2 (241.3) 91/2 (241.3) * Housings are specially reinforced for extra strength L in. (mm) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 3 (76.2) 3 (76.2) 41/4 (107.9) 41/4 (107.9) 43/4 (120.6) 43/4 (120.6) 43/4 (120.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 7 (177.8) 7 (177.8) SCS Diameter in. (mm) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 23/8 (60.3) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 4 (101.6) 4 (101.6) D Diameter 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1"-8 1"-8 1"-8 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 289 Eaton Vibration Isolation Vibration Isolation HH30SCS Type - 15� Tilt, 21/2" (63.5mm) Deflection Combination Hanger - Spring & Neoprene with Seismic Cushion Stop Use: Used to dampen noise and minor vibration from suspended high speed equipment. To be used with all thread rod for single and trapeze type support systems.Used where uncertain alignment is anticipated during installation. At rated load the hanger rod will operate to a full 15� tilt in any direction from vertical centerline. � All housing sizes have been tested to carry five times the maximum load without failure * Extra Strength Hanger HH30SCS-F696 thru HH30SCS-F3420 SCS (T) � Spring rated deflection is 2" (50.8mm) + neoprene rated deflection is 1/2" (12.7mm) = 21/2" (63.5mm) � SFH = Free Height NFH = Neoprene Free Height � Threaded rod, nuts, and washers supplied separately � Minimum additional travel is 50% of rated deflection at rated load Basic Hanger HH30SCS-FT30 thru HH30SCS-F590 S SCS (T) Neoprene S Neoprene L SCS (B) Spring Steel Washer See Neoprene Sleeve Detail D W Hanger Rod Vertical Centerline Neoprene Sleeve Neoprene Sleeve Detail Spring See Neoprene Sleeve Detail Channel Neoprene Sleeve Hanger Rod Vertical Centerline Neoprene Sleeve Detail Dimensions W SCS L (B) D Typical Part Numbering HH30SCS - FT121 Type Load SCS (T) = Seismic Cushion Stop (SCS) Upper Long Life Rubber Cushion SCS (B) = Seismic Cushion Stop (SCS) Lower Long Life Rubber Cushion Bonded To Steel Plate Part Number Maximum Load lbs. (kN) SFH in. (mm) NFH in. (mm) S in. (mm) W in. (mm) HH30SCS-FT30 HH30SCS-FT41 HH30SCS-FT60 HH30SCS-FT85 HH30SCS-FT121 HH30SCS-FT171 HH30SCS-FT241 HH30SCS-F348 HH30SCS-F453 HH30SCS-F590 HH30SCS-F696 * HH30SCS-F906 * HH30SCS-F1180 * HH30SCS-F1352 * HH30SCS-F1574 * HH30SCS-F1836 * HH30SCS-F2318 * HH30SCS-F2816 * HH30SCS-F3420 * 30 (0.13) 41 (0.18) 60 (0.26) 85 (0.38) 121 (0.54) 171 (0.76) 241 (1.07) 348 (1.55) 453 (2.01) 590 (2.62) 696 (3.09) 906 (4.03) 1180 (5.25) 1352 (6.01) 1574 (7.00) 1836 (8.16) 2318 (10.31) 2816 (12.52) 3420 (15.21) 31/2 (88.9) 31/2 (88.9) 33/4 (95.2) 33/4 (95.2) 4 (101.6) 41/4 (107.9) 41/2 (114.3) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 61/2 (165.1) 61/2 (165.1) 61/2 (165.1) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 11/2 (38.1) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 13/4 (44.4) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 21/2 (63.5) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 23/4 (69.8) 8 (203.2) 8 (203.2) 8 (203.2) 8 (203.2) 8 (203.2) 10 (254.0) 10 (254.0) 10 (254.0) 11 (279.4) 11 (279.4) 11 (279.4) 12 (304.8) 12 (304.8) 12 (304.8) 12 (304.8) 12 (304.8) 141/4 (361.9) 141/4 (361.9) 141/4 (361.9) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 5 (127.0) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 51/4 (133.3) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 103/8 (263.5) 123/8 (314.3) 123/8 (314.3) 123/8 (314.3) * Housings are specially reinforced for extra strength L in. (mm) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 4 (101.6) 5 (127.0) 5 (127.0) 5 (127.0) SCS Diameter in. (mm) 23/8 (63.5) 23/8 (63.5) 23/8 (63.5) 23/8 (63.5) 23/8 (63.5) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 3 (76.2) 4 (101.6) 4 (101.6) 4 (101.6) D Diameter 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11 5/8"-11 3/4"-10 3/4"-10 3/4"-10 3/4"-10 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 7/8"-9 Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 290 B-Line series Pipe Hangers & Supports Vibration Isolation Vibration Isolation Vibration Isolation All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 291 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DURA-BLOKTM is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility. Channels are through bolted on all sizes for added strength and a 1" (25.4mm) gap between blocks allows water to flow freely around longer assemblies. Product composition is not sharp or abrasive, helping to extend the roof life and no penetration through the roof is required. The DURA-BLOK dampens vibration, needs no supplemental rubber pad, and will not float or blow away. The DURA-BLOK is UV resistant and is suitable for any type roofing material or other flat surface. For sloped surfaces see page 289 for adjustable hinge fitting (B634). The open ends allow for easier adjustments to DBE, DBR, and DBM series supports. A drainage channel through the center of the block keeps water from pooling under the support. DURA-BLOK can be used to support piping, HVAC/Ducts, roof walkways, conduit and cable tray. Eaton 292 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports Base Only Dimensions - 4" (101mm) High x 6" (152mm) Wide x Base Length Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - (uniform load) * DBP = 500 lbs. (2.22kN) DBM = 200 lbs. (0.89kN) DURA-BLOKTM channel support is designed as an economical support for piping systems, cable tray, HVAC equipment and many other applications. The DURA-BLOK is UV resistant and is suitable for any type of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories. DBP DBM Part No. DBP DBM Height in. (mm) 4" (101) 4" (101) Width in. (mm) 6" (152) 6" (152) Length in. (mm) 9.6" (244) 4.8" (122) Weight Each lbs. (kg) 4.48 (2.03) 2.35 (1.07) * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 293 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DB - Series Base with Galv. Channel - 1" (25.4mm) high Dimensions - 5" (127mm) High x 6" (152mm) Wide x Length (overall length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - (uniform load) * DB5 = 500 lbs. (2.22kN) DB10 = 500 lbs. (2.22kN) DB20 = 1,000 lbs. (4.45kN) DB30 = 1,500 lbs. (6.67kN) DB40 = 2,000 lbs. (8.89kN) DB48 = 2,500 lbs. (11.12kN) DURA-BLOKTM DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634). DB5 DB10 DB20 DB40 DB30 DB48 Part No. DB5 DB10 DB20 DB30 DB40 DB48 Height in. (mm) 5" (127) 5" (127) 5" (127) 5" (127) 5" (127) 5" (127) Width in. (mm) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) Overall Length in. (mm) 4.8" (122) 9.6" (244) 20.2" (513) 30.8" (782) 41.4" (1052) 52.0" (1321) Weight Each lbs. (kg) 2.75 (1.25) 5.28 (2.39) 10.63 (4.82) 15.99 (7.25) 21.34 (9.68) 26.70 (12.4) For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 302. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 294 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DB6 - Series Base with Galv. Channel - 27/16" (62mm) high Dimensions - 67/16" (163mm) High x 6" (152mm) Wide x Length (overall length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - (uniform load) * DB610 = 500 lbs. (2.22kN) DB620 = 1,000 lbs. (4.45kN) DB630 = 1,500 lbs. (6.67kN) DB640 = 2,000 lbs. (8.89kN) DB648 = 2,500 lbs. (22.12kN) DURA-BLOKTM DB6-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634). DB610 DB620 DB630 DB640 DB648 Part No. DB610 DB620 DB630 DB640 DB648 Height in. (mm) 67/16" (167) 67/16" (167) 67/16" (167) 67/16" (167) 67/16" (167) Width in. (mm) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) Overall Length in. (mm) 9.6" (244) 20.2" (513) 30.8" (782) 41.4" (1052) 52.0" (1321) Weight Each lbs. (kg) 6.36 (2.88) 12.90 (5.85) 19.45 (8.82) 26.00 (11.79) 32.55 (14.76) For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 302. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 295 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DB10 - Series Two (2) Bases with Galv. Channel - 15/8" (41mm) high Dimensions - 55/8" (143mm) High x 6" (152mm) Wide x Length (overall length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) * DURA-BLOKTM DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. DB10-28 DB10-36 DB10-50 DB10-42 DB10-60 Eaton Part No. DB10-28 DB10-36 DB10-42 DB10-50 DB10-60 Height in. (mm) 53/8" (143) 53/8" (143) 53/8" (143) 53/8" (143) 53/8" (143) Width in. (mm) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) Individual Base Length in. (mm) 9.6" (244) 9.6" (244) 9.6" (244) 9.6" (244) 9.6" (244) Bridge Length in. (mm) 28" (711) 36" (914) 42" (1067) 50" (1270) 60" (1524) Weight Each lbs. (kg) 13.16 (5.97) 14.36 (6.51) 15.52 (7.04) 16.45 (7.46) 17.94 (8.14) For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 302. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 296 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DBM - Series Base with one (1) 3/8"-16 Electro Zinc All Threaded Rod and Hinged Pipe Clamp Dimensions - Height to Pipe Center x 6" (152mm) Wide x 4.8" (122mm) Long (overall length) Material - 100% recycled rubber, UV resistant Pipe Clamp Material - Malleable Iron - Pipe Sizes - Electro Plated Copper Tubing Sizes - Dura CopperTM Threaded Rod/Hardware - Electro Plated Steel Ultimate Load Capacity - 50 lbs. (0.22kN) (uniform load) * DURA-BLOKTM DBM-Series pipe/tubing support is designed for support of single piping systems where elevation adjustment is needed. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. DBM-2CT Part No. DBM-1/2CT DBM-3/4CT DBM-1CT DBM-11/4CT DBM-11/2CT DBM-2CT DBM-1/2 DBM-3/4 DBM-1 DBM-11/4 DBM-11/2 DBM-2 Height (Minimum) * in. (mm) 9.69" (246) 9.84" (250) 9.95" (253) 10.13" (257) 10.28" (261) 10.53" (267) 9.86" (250) 10.06" (255) 10.14" (257) 10.25" (260) 10.42" (265) 10.66" (271) Height (Maximum) ** in. (mm) 11.19" (284) 11.34" (288) 11.45" (291) 11.63" (295) 11.78" (299) 12.03" (305) 11.36" (288) 11.56" (293) 11.64" (296) 11.75" (298) 11.92" (303) 12.16" (309) Width in. (mm) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) Length in. (mm) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) 4.80" (122) Part No. DBM-1/2CT DBM-3/4CT DBM-1CT DBM-11/4CT DBM-11/2CT DBM-2CT DBM-1/2 DBM-3/4 DBM-1 DBM-11/4 DBM-11/2 DBM-2 Clamp Part No. B3198HCT-1/2 B3198HCT-3/4 B3198HCT-1 B3198HCT-11/4 B3198HCT-11/2 B3198HCT-2 B3198H-1/2 B3198H-3/4 B3198H-1 B3198H-11/4 B3198H-11/2 B3198H-2 Weight Each lbs. (kg) 2.75 (1.25) 2.76 (1.25) 2.84 (1.29) 2.95 (1.34) 2.96 (1.34) 3.03 (1.37) 2.78 (1.26) 2.84 (1.29) 2.86 (1.30) 2.93 (1.33) 2.99 (1.36) 3.10 (1.41) DBM-1 See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 297 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DB_DS - Series Two (2) Base Supports with Galv. Channel - 15/8" (41mm) high Riser Channels (SH Style) - 15/8" (41mm) x 15/8" (41mm) Fittings & Hardware - Electro-Plated Steel Dimensions - Height (overall) x Width (overall) x Length (overall) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) * DURA-BLOKTM DB__DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. B + 4.5" (114mm) B DB2318DS Height (overall) A DB2918DS DB5336DS Width (overall) Product is shipped unassembled. Length (overall) Eaton For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 302. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 298 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports Part No. DB2318DS DB2918DS DB4118DS DB5318DS DB2324DS DB2924DS DB4124DS DB5324DS DB2336DS DB2936DS DB4136DS DB5336DS DB2348DS DB2948DS DB4148DS DB5348DS Part No. DB2318DS DB2918DS DB4118DS DB5318DS DB2324DS DB2924DS DB4124DS DB5324DS DB2336DS DB2936DS DB4136DS DB5336DS DB2348DS DB2948DS DB4148DS DB5348DS DURA-BLOK Rooftop Supports DB__DS - Series cont. A (Minimum) in. (mm) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) 10.56" (268) A (Maximum) in. (mm) 20.75" (527) 26.75" (679) 38.75" (984) 50.75" (1289) 20.75" (527) 26.75" (679) 38.75" (984) 50.75" (1289) 20.75" (527) 26.75" (679) 38.75" (984) 50.75" (1289) 20.75" (527) 26.75" (679) 38.75" (984) 50.75" (1289) Height (overall) in. (mm) 23" (584) 29" (736) 41" (1041) 53" (1346) 23" (584) 29" (736) 41" (1041) 53" (1346) 23" (584) 29" (736) 41" (1041) 53" (1346) 23" (584) 29" (736) 41" (1041) 53" (1346) Width (overall) in. (mm) 255/8" (651) 255/8" (651) 255/8" (651) 255/8" (651) 315/8" (803) 315/8" (803) 315/8" (803) 315/8" (803) 435/8" (1108) 435/8" (1108) 435/8" (1108) 435/8" (1108) 555/8" (1415) 555/8" (1415) 555/8" (1415) 555/8" (1415) B in. (mm) 13.50" (343) 13.50" (343) 13.50" (343) 13.50" (343) 19.50" (495) 19.50" (495) 19.50" (495) 19.50" (495) 31.50" (800) 31.50" (800) 31.50" (800) 31.50" (800) 43.50" (1105) 43.50" (1105) 43.50" (1105) 43.50" (1105) Length (overall) in. (mm) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) 20.2" (513) Weight Each lbs. (kg) 33.31 (15.11) 35.00 (15.88) 38.40 (17.42) 41.80 (18.96) 34.15 (15.49) 35.84 (16.26) 39.25 (17.80) 42.65 (19.34) 35.84 (16.26) 37.55 (17.03) 40.95 (18.57) 44.34 (20.11) 37.55 (17.03) 39.25 (17.80) 42.65 (19.34) 46.03 (20.88) A = Adjustable height from bottom of DURA-BLOKTM to top of horizontal channel. B = Space between fittings that support horizontal channel. Height (overall) = Distance from bottom of DURA-BLOK to top of upright channel. Width (overall) = Distance from outside-to-outside of DURA-BLOK supports. Length (overall) = Distance from end-to-end of DURA-BLOK supports. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 299 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DBR - Series (Fixed Height) Base with Galv. Channel - 1" (25.4mm) high and Pipe Roller Assembly Dimensions - Height to Bottom of Pipe x 6" (152mm) Wide x Long (overall length) Material - 100% recycled rubber, UV resistant Pipe Roller Material - Cast Iron - Electro Plated Brackets, Axle, & Hardware - Electro Plated Steel Ultimate Load Capacity - (uniform load) * DBR2-31/2 = 500 lbs. (2.22kN) DBR4-6 = 500 lbs. (2.22kN) DBR8-10 = 1000 lbs. (4.44kN) DBR12-14 = 1000 lbs. (4.44kN) DBR16-20 = 1000 lbs. (4.44kN) DURA-BLOKTM DBR-Series support is designed to support pipe where longitudinal movement is expected. The DURA-BLOK is UV resistant and approved for installation on any type of roofing material or other flat surfaces. DBR2-31/2 DBR16-20 Part No. DBR2-31/2 DBR4-6 DBR8-10 DBR12-14 DBR16-20 Part No. DBR2-31/2 DBR4-6 DBR8-10 DBR12-14 DBR16-20 Height ** in. (mm) 7.09" (180) 7.09" (180) 8.34" (212) 9.38" (238) 9.78" (248) Width in. (mm) 6" (152) 6" (152) 6" (152) 6" (152) 6" (152) Length in. (mm) 9.6" (244) 9.6" (244) 20.2" (513) 20.2" (513) 20.2" (513) Roller Part No. B3126-2 to 31/2 B3126-4 to 6 B3126-8 to 10 B3126-12 to 14 B3126-16 to 20 Weight Each lbs. (kg) 5.28 (2.39) 10.63 (4.82) 15.99 (7.25) 21.34 (9.68) 26.70 (12.11) See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to bottom of pipe/tubing. Eaton * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 300 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports DBR - Series (Adjustable Height) Base with two (2) 1/2"-13 Electro Zinc All Threaded Rod Risers and a B3114-31/2 Pipe Roll with Sockets Dimensions - Overall Height 12" (305mm) from bottom of base to pipe contact point on roller. Base - 4" High (101mm) x 6" (152mm) Wide x 9.6" (244mm) Length (base length) Material - 100% recycled rubber, UV resistant Pipe Roll & Sockets - For up to 31/2" (90mm) pipe sizes. Ultimate Load Capacity - 200 lbs. (0.89kN) * (To increase load capacity use CLDP10 load distribution plate.) DURA-BLOKTM DBR-Series support is designed to support pipe up to 31/2" (90mm) nominal size where difference in elevation is required and longitudinal movement is expected. The DURA-BLOK is UV resistant and approved for installation on any type of roofing material or other flat surfaces. Part No. DBR10-12 Adjustable Height in. (mm) up to 12" (up to 305) Width in. (mm) 6" (152) Length in. (mm) 9.6" (244) Weight Each lbs. (kg) 6.46 (2.93) DBE - Series Base with two (2) 1/2"-13 Electro Zinc All Threaded Rod Risers and Galv. Channel - 1" (25mm) high Dimensions - Overall Height as Specified Base - 4" High (101mm) x 6" (152mm) Wide x 9.6" (244mm) Length (base length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 200 lbs. (0.89kN) * (To increase load capacity use CLDP10 load distribution plate.) DURA-BLOK DBE-Series channel support is designed as a support of piping systems, cable tray, HVAC equipment and many other applications where elevation adjustment is critical. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 289. DBE10-12 Part No. DBE10-8 DBE10-12 DBE10-16 Adjustable Height in. (mm) 51/2" - 8" (140 - 203) 51/2" - 12" (140 - 305) 51/2" - 16" (140 - 406) Width in. (mm) 6" (152) 6" (152) 6" (152) Channel Length in. (mm) 9.35" (238) 9.35" (238) 9.35" (238) Weight Each lbs. (kg) 5.68 (2.58) 5.72 (2.59) 5.76 (2.61) ** Longer base lengths available. Note: At heights above 12" (305mm), we suggest using the DB_DS Series Channel Support with Risers for additional stability to piping system. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 301 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports CLDP10 - Load Distribution Plate Steel Plate with Slots Dimensions - 15/8" (41mm) Wide x 61/2" (65mm) Long Material - 11 Ga. steel (3.0mm) Increases ultimate uniform load capacity on DBE & DBR Series supports to 500 lbs. (2.22kN) DURA-BLOKTM CLDP10 load bearing stabilizer plate increases load ratings for DBE Series and DBR Series supports by allowing the load from the threaded rods to be distributed over the length of the base instead of the point load where the rods attach to the base. Loosen hex nuts and slide plate under the flat washers Part No. CLDP10 Adjustable Height in. (mm) 11 Ga. (3.05) Width in. (mm) 15/8" (41) Retighten the hex nuts with plate in place Length in. (mm) 91/2" (241) Weight Each lbs. (kg) 0.53 (0.24) Compatible Components Available to make DURA-BLOK bases more versatile BTS TN Nuts HHCS B22TH B22SH B634 B101 B104 1BBV-1PL/1I25N"0E.I.P BVT Series B2000 Series B2400 Series B3124 Series B218 B379 B219 Series B479 Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units. B3126 Series Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 302 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports Rooftop Support Specification SECTION 07720 ROOFTOP SUPPORT SYSTEMS (Applicable to Section 15060 (Mechanical) and Section 16070 (Electrical) PART 1 GENERAL 1.01 SECTION INCLUDES A. The work covered by this specification consists of furnishing all labor, equipment, materials and accessories, and performing all operations required for the correct installation of recycled rubber pipe [conduit] supports for mechanical piping [electrical conduit] systems. 1.02 REFERENCES A. ASTM A653 G90 SS Gr. 33 - Specification for Steel Sheet, Zinc Coated (Galvanized) by the Hot Dipped Process B. ASTM B633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel C. ASTM C531 � Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical Resistant Mortars, Grouts, Monolithic Surfaces, and Polymer Concretes D. ASTM C642 � Test Method for Specific Gravity, Absorption, and Voids in Hardened Concrete E. ASTM C672 � Test Methods for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals F. ASTM D412 � Test Methods for Vulcanized Rubber and Thermoplastic Elastomers � Tension G. ASTM D395 � Standard Test Methods for Rubber Property � Compression Set H. ASTM D573 � Test Method for Rubber � Deterioration in an Air Oven I. ASTM D746 � Test Method for Brittleness Temperature of Plastics and Elastomers by Impact J. ASTM D2240 � Test Method for Rubber Property � Durometer Hardness K. NFPA 70 � National Electrical Code 1.03 QUALITY ASSURANCE A. Rubber / steel pipe supports shall be manufactured under a strict quality control program assuring quality product delivered to the jobsite. Pipe supports that are damaged shall not be installed. B. Workmanship: All pipe [conduit] supports to be installed by a qualified piping [electrical] contractor and installed in accordance with manufacturer's recommendations. 1. All work shall comply with all applicable federal, state, and local codes and laws having jurisdiction. 2. All work shall conform to accepted industry and trade standards for pipe support [conduit] installations. PART 2 PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS A. Manufacturer: Subject to compliance with these specifications, pipe support systems shall be DURA-BLOKTM design as supplied by Eaton [or engineer approved equal]. 2.02 MATERIALS A. Curb base must be made of 100% recycled rubber and polyurethane prepolymer with a uniform load capacity of 500 pounds per linear foot of support.* In addition, each base to have a reflective red stripe. (*See 3.01(C)) B. Dimensions: 6-inches wide by [4] [5.0] [6.75] inches tall by [9.6] [20.2] [30.8] [41.4] [52.0] inches long. C. Steel frame: Steel, strut galvanized per ASTM A653 or strut galvanized per ASTM A653 for bridge series. D. Attaching hardware: Zinc-plated threaded rod, nuts and attaching hardware per ASTM B633. E. Any products claiming to be a similar, like, or equal must demonstrate (meet or exceed) the same physical and performance characteristics as specified below: 1. Density: 0.52 oz/cu in ASTM D575 2. Durometer Hardness: 67.2A � 1 ASTM D575 3. Tensile Strength: 231 psi minimum ASTM D575 4. Compression Deformation: 5% at 70psi and 72�F ASTM D575 5. Brittleness at Low Temp: -50�F ASTM D746 6. Weathering: 70 hours at 120�F ASTM D573 a. Hardness retained: 100% (�5%) b. Compressive strength: 100% (�5%) c. Tensile strength: 100% (�5%) d. Elongation retained: 100% (�5%) 2.03 TYPE OF ROOFTOP SUPPORTS A. Rubber block supports � DURA-BLOKTM model # [DBP] [DMB] base dimensions: 6-inch wide by 4-inch tall by [9.6] [4.8]-inch length. Accessories are fastened directly into rubber material with weather resistant type 12 lag screws. B. Continuous block channel supports � DURA-BLOKTM DB Series or DB6 Series: Dimensions 6-inch wide bt [5.0] [6.5]-inch tall bt [9.6] [20.2] [30.8] [41.4] [52.0]-inch length. Assembly has 1" gaps between blocks for free flow of water. Standard strut accessories can be used for attachment. C. Bridge channel supports � DURA-BLOKTM DB10 Series; Dimensions 6-inch wide by 55/8 -inch tall by [28.0] [36.0] [42.0] [50.0] [60.0]-inch length. Standard strut accessories can be used for attachment. D. Extendible height support � DURA-BLOKTM model DBE 10-[8][12][16], height to suit application: 8-inch, 12-inch or 16-inch (200 pound maximum load). Base to be 9.6 inches in length or otherwise specified sizes available. Heavier loads, may require CLDP load distribution plate. E. Roller supports� DURA-BLOKTM DBR10 Series & DBR Series: DBR10 Series is sized for pipe up to 31/2 inches, with vertical adjustment up to 12 inches. DBR Series is sized for [2-31/2] [4-6] [8-10] [12-14] [16-20] inch pipe sizes. F. Elevated single pipe supports� DURA-BLOKTM DBM Series: [Copper] or [Steel] pipe sizes [1/2] [3/4] [1] [11/4] [11/2] [2]-inch. PART 3 EXECUTION 3.01 INSTALLATION A. Install in accordance with manufacturer's instructions an recommendations. B. If gravel top roof, gravel must be removed around and under pipe support. C. Always consult roofing manufacturer for roof membrane compression capacities. If necessary, a compatible sheet of roofing material (rubber pad) may be installed under rooftop support to disperse concentrated loads and add further membrane protection. D. Gas pipe spacing subject to local gas authorities. E. Use properly sized clamps to suit pipe [conduit] sizes. B-Line series Pipe Hangers & Supports 303 Eaton DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports GRATEWALK Rooftop Walkway with Integrated DURA-BLOKTM Supports B-Line series GRATEWALKTM Rooftop Walkways with DURA-BLOKTM provides the optimal solution to extend the life of your roof, while providing a safe pathway to roof mounted support equipment. Features & Benefits of the GRATEWALK Rooftop Walkway � Available with slip resistant GRATE-LOCKTM, helping provide a safe walkway for foot traffic on the roof. � Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent wear and tear to the roof surface. � The cross-over design offers safe passage over existing cabling, piping, cable tray or any other interference on the rooftop. � The self cleaning pattern allows water and dirt to easily flow through, helping make the grating an ideal walkway in all weather conditions. � Handrail options are available � Integrated with 100% post-consumer recycled rubber supporting LEED credit qualification. � Provide solid support for the walkway that stays in place and replaces the need for separate rubber roof mounting pads which tend to float away. Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 304 B-Line series Pipe Hangers & Supports DURA-BLOK Rooftop Supports DURA-BLOK Rooftop Supports GRATEWALK Rooftop Walkway with Integrated DURA-BLOKTM Supports The GRATEWALKTM Rooftop Walkway with Integrated DURA-BLOKTM Supports* is available in a variety of configurations. � Straight sections for long straight stretches of pathway � Cross-over options to install over the existing cable trays, piping, and more � Stairways over the top of existing equipment or leading up to existing equipment � Handrail options available for additional wallway safety and support � Platforms to provide access to rooftop mounted equipment � Accessories available to support unique requirements * All Items are shipped individually for field assembly. Engineering Design Service � Take-off and estimating � Specification review and development � Alternative layout designs � Technical consultation � Submittal drawing packages (see Figure A) including assembly instructions Figure A B-Line series Pipe Hangers & Supports 305 Eaton KwikWire Accessories KwikWire The new KwikWireTM Hanging System is a flexible replacement for jack chain and all thread rod. The KwikWire System will slash your hanging time and the clamp can be easily adjusted by hand. Some of the key benefits of using the new KwikWire System include: � Installs up to 50% faster - can quickly wrap around beam with no drilling required � Simple height adjustments are made by releasing the clamp's adjustment pin � no tools required � Aesthetic appeal - blends in with upper structural supports � Compatibility with many B-Line series fastener, anchor and hanger products � Ideal for sloped ceiling applications - will support loads at up to a 60� angle from vertical Applications for the KwikWire Hanging System include light fixture supports, HVAC duct supports, sway bracing, sign/banner supports, wire basket cable tray supports, bus duct supports and air handling equipment supports. Eaton 306 B-Line series Pipe Hangers & Supports KwikWire KwikWire Clamp Working Loads* Clamp Part No. Wire Lbs. Rope Safety Dia. Factor 5 BKC100 BKC100 BKC200 BKC200 1/16" 3/32" 1/8" 3/16" 0-75 25-150 25-250 50-640 KwikWire Accessories KwikWire Clamps Part No. For Use With Wire Box Rope Diameters Qty. BKC100 1/16" (1.6mm) & 3/32" (2.3mm) 100 BKC200 1/8" (3.2mm) & 3/16" (4.7mm) 50 See table below for KwikWireTM Clamp Working Loads * Working loads shown are for hanging vertically. For suspending at 15�, 30�, 45� or 60� angles from vertical, use the following percentage of the working loads from the chart: 15� = 96% 30� = 86% 45� = 70% 60� = 50% KwikWire Wire Rope (Uncoated Galvanized Wire) 7 x 7 7 x 19 Part No. BKW063 (1) BKW094 (1) BKW125 (1) BKW188 (2) Rope Dia. in. mm 1/16" (1.6) 3/32" (2.3) 1/8" (3.2) 3/16" (4.8) Working Load Lbs. kg 96 (43.5) 184 (83.4) 340 (154.2) 840 (381.0) Spool 500 ft. 500 ft. 500 ft. 250 ft. (1) Wire Rope Construction Type 7 x 7 (2) Wire Rope Construction Type 7 x 19 Instructions for installing the wire rope in the clamp - No tools are required. 1 2 3 4 5 Pass the wire rope through the KwikWire Clamp Loop wire rope through/around support Pass wire rope back through KwikWire Clamp Push wire rope through clamp leaving 2" to 3" tail, then apply tension on wire rope To adjust, remove tension and pull wire rope slightly to disengage teeth, slide adjustment pin in direction shown by arrow to release wire rope. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 307 Eaton KwikWire Accessories KwikPak Wire Rope & Clamps KwikPak KwikWire For Use With Wire Box Part No. Rope Diameters Qty. BKP10063 BKC100 (100 pcs.) 1/16"� Wire Rope (500 ft.) 1 BKP10094 BKC100 (100 pcs.) 3/32"� Wire Rope (500 ft.) 1 BKP20125 BKC200 (50 pcs.) 1/8"� Wire Rope (500 ft.) 1 BKP20188 BKC200 (50 pcs.) 3/16"� Wire Rope (250 ft.) 1 � KwikPakTM includes KwikWire clamps and a spool of wire rope. � KwikPak is shipped in a specially designed dispenser box to ease field cutting of wire. KwikWire System Recommendations: � Do not exceed the safe working load of the products � KwikWire Clamp load ratings are guaranteed only when used in combination with our supplied wire rope � Do not use for overhead lifting or hoisting � Do not use if cable or components are visibly distorted or worn. Remove damaged cable end prior to inserting in KwikWire Clamp � Do not paint cable near working area of KwikWire Clamp � Do not apply lubricant � Keep product clean and free of dirt � Do not use clamp on coated wire rope � Do not use in chlorinated or caustic atmospheres � For use in dry locations � BKCC tool is recommended for cutting wire rope to prevent fraying KwikWire Cable Cutter Box Part No. Qty. BKCC 1 � Wire rope cutter for cutting all wire rope sizes ** Never use cutters on energized circuits, wire, or cable. Eaton NEVER USE CUTTERS ON ENERGIZED CIRCUITS, WIRE, OR CABLE. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 308 B-Line series Pipe Hangers & Supports KwikWire KwikWire Accessories KwikWire Hanger shown with KwikWire � KwikWireTM hanger combines the versatility of a bolt with an adjustable wire rope solution � Can be quickly installed in existing anchors or metal brackets with a nut � ARS, ARC, and ARW anchors are ideal for use with KwikWire Hangers � Ideal for supporting light fixtures, wire basket cable tray, HVAC ducts, and sign/banner supports � Allows for tool-less adjustment of wire rope KwikWire Hanger Part No. BKF100-4 BKF100-6 Thread Size 1/4"-20 3/8"-16 Wire Rope Dia. in. mm 1/16" (1.6) 3/32" (2.3) 1/16" (1.6) 3/32" (2.3) Loading* SF5 Lbs. kg 45 (20.4) 90 (40.8) 45 (20.4) 90 (40.8) KwikWire Hanger installation 1 2 3 Screw KwikWire Hanger into installed hanger support (ARS anchor pictured) 4 Push cable wire up through the bottom of KwikWire Hanger 5 Continue pushing through until 1/4" minimum is extending out the side of the KwikWire Hanger 6 To adjust up pull or push more cable wire through KwikWire Hanger To adjust down - push up on bottom of KwikWire Hanger and allow cable wire to feed down When hanging the cable wire is complete, cut off any excess cable wire if desired All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 309 Eaton KwikWire KwikWire Accessories KwikWire Accessory Features � Reduces on the job installation time � Can be installed quickly without drilling into existing structure � Increases versatility in the field � KwikWire accessory system reduces inventory and shipping costs � No more sawing, filing, or fixing nuts � Designed for use with cable tray, lighting, and HVAC � Eliminates the need for all threaded rod � Cost effective solution for jack chain � "Y" style accessories require 50% less drilling KwikWire Accessory Numbering System Product Assembly Line Configuration Leg Termination Leg Length Wire Rope Diameter Straight Length Assembly or Kit BK = KwikWireTM Blank = Single Leg A = Angle Bracket w/Pin Blank = See Straight Length Y = 2 Legs H = Hook 18 = 18" Leg 3 - 3 Legs L = Loop 30 = 30" Leg T = Toggle W = Fuse Cut B25 = Bolt w/ 1/4"-20 Thread B38 = Bolt w/ 3/8"-16 Thread BM6 = Bolt w/ M6 Thread BM8 = Bolt w/ M8 Thread BM10 = Bolt w/ M10 Thread 063 = 1/16" 094 = 3/32" Blank = Loop w/ Plastic Tube Blank = Assembly Only 18 = 18" 30 = 30" 40 = 40" K = Kit (Assembly & BKC100 Clamp) 80 = 80" 120 = 120" 180 = 180" 240 = 240" 360 = 360" Examples BKYT18-094-120K BK Y T 18 - 063 - 120 K KwikWire Accessory 2 legs - toggle leg termination - 18" legs - 1/16" diameter wire - 120" straight length - kit with clamp BKL-063-120K BK L - 063 - 120 K KwikWire Accessory single leg - looped leg termination - 1/16" diameter wire - 120" straight length - kit with clamp Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 310 B-Line series Pipe Hangers & Supports KwikWire Part No. BKL-063-40 BKL-063-80 BKL-063-120 BKL-063-180 BKL-063-240 BKL-063-360 BKL-094-40 BKL-094-80 BKL-094-120 BKL-094-180 BKL-094-240 BKL-094-360 Wire Rope Dia. in. mm 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) Part No. BKL-063-40K BKL-063-80K BKL-063-120K BKL-063-180K BKL-063-240K BKL-063-360K BKL-094-40K BKL-094-80K BKL-094-120K BKL-094-180K BKL-094-240K BKL-094-360K Wire Rope Dia. in. mm 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) KwikWire Accessories KwikWire Loop Termination Box Quantity - 20 5 bags containing 4 pieces per bag KwikWire Loop Termination Kits Box Quantity - 20 5 bags containing 4 pieces per bag � Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp � Available in lengths of 40", 80", 120", 180", 240", and 360" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 311 Eaton KwikWire KwikWire Accessories KwikWire Single Style Hook Termination Box Quantity - 20 5 bags containing 4 pieces per bag Part No. BKH-094-40 BKH-094-80 BKH-094-120 BKH-094-180 BKH-094-240 BKH-094-360 KwikWire Single Style Hook Termination Kits Wire Rope Dia. in. mm 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) Box Quantity - 20 5 bags containing 4 pieces per bag Part No. BKH-094-40K BKH-094-80K BKH-094-120K BKH-094-180K BKH-094-240K BKH-094-360K Wire Rope Dia. in. mm 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) KwikWire `Y' Style Hook Termination With Loop Box Quantity - 10 5 bags containing 2 pieces per bag Part No. BKYH18-094 BKYH30-094 Wire Rope Dia. in. mm 3/32" (2.3) 3/32" (2.3) Length in. mm 18" (457) 30" (762) � Hook designed to accept up to 3/8" diameter wire � Available as a wire rope with hook termination only or as a ready-to-use kit with a BKC100 clamp � Available in lengths of 40", 80", 120", 180", 240", and 360" � Available in single, double (Y), and triple (3) leg styles Triple (3) leg style Eaton All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 312 B-Line series Pipe Hangers & Supports KwikWire Part No. BKYH18-094-40 BKYH18-094-80 BKYH18-094-120 BKYH18-094-180 BKYH18-094-240 BKYH18-094-360 BKYH30-094-40 BKYH30-094-80 BKYH30-094-120 BKYH30-094-180 BKYH30-094-240 BKYH30-094-360 KwikWire Accessories KwikWire `Y' Style Hook Termination Leg Length in. mm 18" (457) 18" (457) 18" (457) 18" (457) 18" (457) 18" (457) 30" (762) 30" (762) 30" (762) 30" (762) 30" (762) 30" (762) Wire Rope Dia. in. mm 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) Box Quantity - 10 5 bags containing 2 pieces per bag Part No. BKYH18-094-40K BKYH18-094-80K BKYH18-094-120K BKYH18-094-180K BKYH18-094-240K BKYH18-094-360K BKYH30-094-40K BKYH30-094-80K BKYH30-094-120K BKYH30-094-180K BKYH30-094-240K BKYH30-094-360K KwikWire `Y' Style Hook Termination Kits Leg Length in. mm 18" (457) 18" (457) 18" (457) 18" (457) 18" (457) 18" (457) 30" (762) 30" (762) 30" (762) 30" (762) 30" (762) 30" (762) Wire Rope Dia. in. mm 3/32" 3/32" 3/32" 3/32" 3/32" 3/32" (2.3) (2.3) (2.3) (2.3) (2.3) (2.3) 3/32" 3/32" 3/32" 3/32" 3/32" 3/32" (2.3) (2.3) (2.3) (2.3) (2.3) (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) Box Quantity - 10 5 bags containing 2 pieces per bag � Hook designed to accept up to 3/8" diameter wire � Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp � Available in lengths of 40", 80", 120", 180", 240", and 360" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 313 Eaton KwikWire KwikWire Accessories KwikWire Bolt Termination Box Quantity - 20 5 bags containing 4 pieces per bag Part No. BKB25-063-40 BKB25-063-80 BKB25-063-120 BKB25-063-180 BKB25-063-240 BKB25-063-360 BKB38-094-40 BKB38-094-80 BKB38-094-120 BKB38-094-180 BKB38-094-240 BKB38-094-360 Thread Size 1/4"-20 1/4"-20 1/4"-20 1/4"-20 1/4"-20 1/4"-20 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 Wire Rope Dia. in. mm 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) KwikWire Bolt Termination Kits Box Quantity - 20 5 bags containing 4 pieces per bag Part No. BKB25-063-40K BKB25-063-80K BKB25-063-120K BKB25-063-180K BKB25-063-240K BKB25-063-360K BKB38-094-40K BKB38-094-80K BKB38-094-120K BKB38-094-180K BKB38-094-240K BKB38-094-360K Thread Size 1/4"-20 1/4"-20 1/4"-20 1/4"-20 1/4"-20 1/4"-20 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 3/8"-16 Wire Rope Dia. in. mm 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) 3/32" (2.3) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) � Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors � Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp � Available in lengths of 40", 80", 120", 180", 240", and 360" � Available in single, double (Y), and triple leg (3) styles � All (Y) and triple (3) styles are non-stock, contact us for lead times Eaton Double (Y) leg style Triple (3) leg style All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 314 B-Line series Pipe Hangers & Supports KwikWire Part No. BKA-063-40 BKA-063-80 BKA-063-120 BKA-063-180 BKA-063-240 BKA-063-360 Wire Rope Dia. in. mm 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) KwikWire Accessories KwikWire Angle Bracket Termination Box Quantity - 20 5 bags containing 4 pieces per bag KwikWire Angle Bracket Termination Kits Part No. BKA-063-40K BKA-063-80K BKA-063-120K BKA-063-180K BKA-063-240K BKA-063-360K Wire Rope Dia. in. mm 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) 1/16" (1.6) Length in. mm 40" (1016) 80" (2032) 120" (3048) 180" (4572) 240" (6096) 360" (9144) Box Quantity - 20 5 bags containing 4 pieces per bag � Available as a wire rope with angle bracket termination only or as a ready-to-use kit with a BKC100 clamp � Available in lengths of 40", 80", 120", 180", 240", and 360" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line series Pipe Hangers & Supports 315 Eaton Seismic Anchor Load Chart Information For load information when using Fig. 980, Fig. 910, or Fig. 909 with pre-installed or post-installed concrete anchors in compliance with NFPA 13 (2016) or ASCE 7-10, including prying factors, see load tables on the Eaton website at the following location: Eaton.com/seismic-resources If you have any questions, contact TolcoSupport@Eaton.com Reference Data Eaton 316 B-Line series Pipe Hangers & Supports Reference Data Reference Data - Metric Conversion Chart To Convert From To Multiply By To Convert From To Multiply By Angle degree radian (rad) radian (rad) degree Area foot2 inch2 circular mil sq. centimeter (cm2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square inch (in2) foot2 inch2 circular mil Temperature degree Fahrenheit degree Celsius degree Celsius degree Fahrenheit Force pounds-force (lbf) newtons (N) Section Properties section modulus S (in3) moment of inertia I (in4) modulus of elasticity E (psi) S (m3) I (m4) E (Pa) 1.745329 x 10-2 5.729578 x 10+1 9.290304 x 10-2 6.451600 x 10-4 5.067075 x 10-10 1.550003 x 10-1 1.076391 x 10+1 1.550003 x 10+3 1.973525 x 10+9 t�C = (t�F - 32) / 1.8 t�F = 1.8 t�C + 32 4.448222 1.638706 x 10-5 4.162314 x 10-7 6.894757 x 10+3 Length foot (ft) inch (in) mil inch (in) meter (m) meter (m) meter (m) micrometer (m) meter (m) meter (m) meter (m) micrometer (m) foot (ft) inch (in) mil inch (in) Volume foot3 inch3 cubic centimeter (cm3) cubic meter (m3) cubic meter (m3) gallon (U.S. liquid) cubic meter (m3) cubic meter (m3) cubic inch (in3) foot3 inch3 cubic meter (m3) section modulus S (m3) moment of inertia I (m4) modulus of elasticity E (Pa) S (in3) I (in4) E (psi) 3.048000 x 10-1 2.540000 x 10-2 2.540000 x 10-5 2.540000 x 10+4 3.280840 3.937008 x 10+1 3.937008 x 10+4 3.937008 x 10-5 2.831685 x 10-2 1.638706 x 10-5 6.102374 x 10-2 3.531466 x 10+1 6.102376 x 10+4 3.785412 x 10-3 6.102374 x 10+4 2.402510 x 10+6 1.450377 x 10-4 To Convert From To Multiply By Bending Moment or Torque lbf�ft newton meter (N�m) lbf�in newton meter (N�m) N�m lbf�ft N�m lbf�in 1.355818 1.129848 x 10-1 7.375621 x 10-1 8.850748 Mass ounce (avoirdupois) pound (avoirdupois) ton (short, 2000 lb) ton (long, 2240 lb) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) ounce (avoirdupois) pound (avoirdupois) ton (short 2000 lb) ton (long 2240 lb) 2.834952 x 10-2 4.535924 x 10-1 9.071847 x 10+2 1.016047 x 10+3 3.527396 x 10+1 2.204622 1.102311 x 10-3 9.842064 x 10-4 Mass Per Unit Length lb/ft lb/in kg/m kg/m kilogram per meter (kg/m) kilogram per meter (kg/m) lb/ft lb/in 1.488164 1.785797 x 10+1 6.719689 x 10-1 5.599741 x 10-2 Mass Per Unit Volume lb/ft3 kilogram per cubic meter (kg/m3) lb/in3 kilogram per cubic meter (kg/m3) kg/m3 lb/ft3 kg/m3 lb/in3 lbs/ft3 lbs/in3 1.601846 x 10+1 2.767990 x 10+4 6.242797 x 10-2 3.612730 x 10-5 1.728000 x 10+3 Mass Per Area Unit lb/ft2 kilogram per square meter (kg/m2) kg/m2 pound per square foot (lb/ft2) 4.882428 2.048161 x 10-1 Pressure or Stress lbf/in2 (psi) kip/in2 (ksi) lbf/in2 (psi) pascal (Pa) pascal (Pa) megapascals (MPa) pascal (Pa) pascal (Pa) megapascals (MPa) pound force per sq. inch (psi) kip per sq. inch (ksi) lbf/in2 (psi) 6.894757 x 10+3 6.894757 x 10+6 6.894757 x 10-3 1.450377 x 10-4 1.450377 x 10-7 1.450377 x 10+2 AISC AISI ANSI ASTM AWWA Dia. Ft. Ga. I.D. In. Lbs. Max. Min. MSS NFPA O.D. Oz. Pre-Galv. psi PVC UL UNC UNCR Wt./C Abbreviations = American Institute of Steel Construction = American Iron & Steel Institute = American National Standards Institute = American Society for Testing & Materials = American Water Works Association = Diameter = Feet = Gauge = Inside Diameter = Inch = Pounds = Maximum = Minimum = Manufacturers Standardization Society = National Fire Protection Association = Outside Diameter = Ounces = Pre-galvanized = Pounds Per Square Inch = Polyvinyl Chloride = Underwriters' Laboratories, Inc. = Unified Coarse Threads = Unified Coarse Threads (Rounded Root) = Weight per 100 Metric Symbols cm = centimeter kg = kilogram kN = kilonewton m = meter m = micrometer mm = millimeter MPa = megapascal N = newton Nm = newton-meter Pa = pascal B-Line series Pipe Hangers & Supports 317 Eaton Reference Data Reference Data Decimals of a Foot Inch 0" 1" 0 .0000 .0833 1/16 .0052 .0085 1/8 .0104 .0938 3/16 .0156 .0990 1/4 .0208 .1042 5/16 .0260 .1094 3/8 .0313 .1146 7/16 .0365 .1198 1/2 .0417 .1250 9/16 .0469 .1302 5/8 .0521 .1354 11/16 .0573 .1406 3/4 .0625 .1458 13/16 .0677 .1510 7/8 .0729 .1563 15/16 .0781 .1615 2" .1667 .1719 .1771 .1823 .1875 .1927 .1979 .2031 .2083 .2135 .2188 .2240 .2292 .2344 .2396 .2448 3" .2500 .2552 .2604 .2656 .2708 .2760 .2812 .2891 .2917 .2969 .3021 .3073 .3125 .3177 .3229 .3281 4" .3330 .3385 .3438 .3490 .3542 .3594 .3646 .3724 .3750 .3802 .3854 .3906 .3958 .4010 .4063 .4118 5" .4167 .4219 .4271 .4323 .4375 .4427 .4479 .4557 .4583 .4635 .4688 .4740 .4792 .4844 .4896 .4948 6" .5000 .5052 .5104 .5156 .5208 .5260 .5313 .5391 .5417 .5469 .5521 .5573 .5625 .5677 .5729 .5781 7" .5833 .5885 .5938 .5990 .6042 .6094 .6146 .6224 .6250 .6302 .6354 .6406 .6458 .6510 .6563 .6615 8" .6667 .6719 .6771 .6823 .6875 .6927 .6979 .7057 .7083 .7135 .7188 .7240 .7292 .7344 .7396 .7448 9" .7500 .7552 .7604 .7656 .7708 .7760 .7813 .7891 .7917 .7969 .8021 .8073 .8125 .8177 .8229 .8221 10" .8333 .8385 .8438 .8490 .8542 .8594 .8646 .8724 .8750 .8802 .8854 .8906 .8958 .9010 .9063 .9115 11" .9167 .9219 .9271 .9323 .9375 .9427 .9479 .9557 .9583 .9635 .9688 .9740 .9792 .9844 .9896 .9948 Fractions of a Inch Fraction 1/32 1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 Decimal .0312 .0625 .0937 .1250 .1562 .1875 .2187 .2500 .2812 .3125 .3437 .3750 .4062 .4375 .4687 .5000 Fraction 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/16 31/32 1 Decimal .5312 .5625 .5937 .6250 .6562 .6875 .7187 .7500 .7812 .8125 .8437 .8750 .9062 .9375 .9687 1.0000 Eaton 318 B-Line series Pipe Hangers & Supports Reference Data Schedule 40 Steel Pipe Data Nominal Pipe Size In. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Pipe O.D. In. (mm) .675 (17.1) .840 (21.3) 1.050 (26.7) 1.315 (33.4) 1.660 (42.1) 1.900 (48.2) 2.375 (60.3) 2.875 (73.0) 3.500 (88.9) 4.000 (101.6) 4.500 (114.3) 5.563 (141.3) 6.625 (168.3) 8.625 (219.1) 10.750 (273.0) 12.750 (323.8) 14.000 (355.6) 16.000 (406.4) 18.000 (457.2) 20.000 (508.0) 24.000 (609.6) Wall Thickness In. (mm) .091 (2.3) .109 (2.7) .113 (2.9) .133 (3.4) .140 (3.5) .145 (3.7) .154 (3.9) .203 (5.1) .216 (5.5) .226 (5.7) .237 (6.0) .258 (6.5) .280 (7.1) .322 (8.2) .365 (9.3) .406 (10.3) .437 (11.1) .500 (12.7) .563 (14.3) .593 (15.1) .687 (17.4) Reference Data Weight of Pipe Lbs./Ft. (kg/m) .6 (0.9) .8 (1.2) 1.1 (1.7) 1.7 (2.5) 2.3 (3.4) 2.7 (4.0) 3.6 (5.4) 5.8 (8.6) 7.6 (11.2) 9.1 (13.5) 10.8 (16.0) 14.6 (21.7) 19.0 (28.2) 28.5 (42.5) 40.5 (60.2) 51.1 (75.9) 63.0 (93.7) 83.0 (123.5) 105.0 (156.2) 123.0 (183.0) 171.0 (254.5) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) .7 (1.0) .9 (1.2) 1.3 (2.0) 2.1 (3.0) 2.9 (4.3) 3.6 (5.3) 5.0 (7.5) 7.9 (11.7) 10.8 (15.9) 13.4 (19.8) 16.3 (24.2) 23.2 (34.6) 31.5 (46.8) 50.1 (74.6) 74.6 (110.9) 102.1 (151.9) 121.5 (180.7) 159.5 (237.3) 202.2 (300.8) 243.4 (361.8) 345.2 (513.7) Maximum Recommended Span* Hanger Rod Ft. (Meter) Sizes 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 9 (2.74) 3/8"-16 10 (3.05) 3/8"-16 11 (3.35) 1/2"-13 12 (3.66) 1/2"-13 13 (3.96) 1/2"-13 14 (4.27) 5/8"-11 16 (4.87) 5/8"-11 17 (5.18) 3/4"-10 19 (5.79) 3/4"-10 22 (6.69) 7/8"-9 23 (7.01) 7/8"-9 25 (7.62) 1"-8 27 (8.23) 1"-8 28 (8.53) 1"-8 30 (9.14) 11/4"-7 32 (9.75) 11/4"-7 Based on ASTM A53-86. 1 cubic ft. of water weighs 62.41 lbs. 1 gallon (U.S.) weighs 8.335 lbs. 1 cubic meter of water weighs 999.97 kg. 1 liter weighs .999 kg. Based on MSS SP-69 Table 3 & 4. *Many codes require pipe hangers to be spaced every 10' (3.048 meters) regardless of size. Check local codes. Spacing and capacities are based on water filled pipe. Closer hanger spacing may be required where additional valves and fittings increase the load. B-Line series Pipe Hangers & Supports 319 Eaton Reference Data Reference Data Schedule 80 Steel Pipe Data Nominal Pipe Size In. (mm) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) Pipe O.D. In. (mm) .675 (17.1) .840 (21.3) 1.050 (26.7) 1.315 (33.4) 1.660 (42.1) 1.900 (48.2) 2.375 (60.3) 2.875 (73.0) 3.500 (88.9) 4.000 (101.6) 4.500 (114.3) 5.563 (141.3) 6.625 (168.3) 8.625 (219.1) 10.750 (273.0) 12.750 (323.8) 14.000 (355.6) 16.000 (406.4) 18.000 (457.2) 20.000 (508.0) 24.000 (609.6) Wall Thickness In. (mm) .126 (3.2) .147 (3.7) .154 (3.9) .179 (4.5) .191 (4.8) .200 (5.1) .218 (5.5) .276 (7.0) .300 (7.6) .318 (8.1) .337 (8.5) .375 (9.5) .432 (11.0) .500 (12.7) .593 (15.0) .687 (17.4) .750 (19.0) .843 (21.4) .937 (23.8) 1.031 (26.2) 1.218 (30.9) Weight of Pipe Lbs./Ft. (kg/m) .7 (1.1) 1.1 (1.6) 1.5 (2.2) 2.2 (3.2) 3.0 (4.4) 3.6 (5.4) 5.0 (7.5) 7.6 (11.4) 10.2 (15.2) 12.5 (18.6) 15.0 (22.3) 20.8 (30.9) 28.6 (42.5) 43.4 (64.5) 64.4 (95.8) 88.6 (131.8) 107.0 (159.2) 137.0 (203.9) 171.0 (254.5) 209.0 (311.0) 297.0 (442.0) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) .8 (1.2) 1.2 (1.7) 1.7 (2.5) 2.5 (3.6) 3.5 (5.2) 4.3 (6.5) 6.3 (9.4) 9.4 (14.1) 13.0 (19.4) 16.3 (24.3) 20.0 (29.7) 28.7 (42.6) 39.9 (59.3) 63.1 (93.9) 95.5 (142.1) 132.6 (197.3) 158.2 (235.4) 206.7 (306.6) 259.5 (386.2) 318.4 (473.8) 455.2 (677.4) Maximum Recommended Span* Hanger Rod Ft. (Meter) Sizes 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 7 (2.13) 3/8"-16 9 (2.74) 3/8"-16 10 (3.05) 3/8"-16 11 (3.35) 1/2"-13 12 (3.66) 1/2"-13 13 (3.96) 1/2"-13 14 (4.27) 5/8"-11 16 (4.87) 5/8"-11 17 (5.18) 3/4"-10 19 (5.79) 3/4"-10 22 (6.69) 7/8"-9 23 (7.01) 7/8"-9 25 (7.62) 1"-8 27 (8.23) 1"-8 28 (8.53) 1"-8 30 (9.14) 11/4"-7 32 (9.75) 11/4"-7 Based on ASTM A53-86. 1 cubic ft. of water weighs 62.41 lbs. 1 gallon (U.S.) weighs 8.335 lbs. 1 cubic meter of water weighs 999.97 kg. 1 liter weighs .999 kg. Based on MSS SP-69 Table 3 & 4. *Many codes require pipe hangers to be spaced every 10' (3.048 meters) regardless of size. Check local codes. Spacing and capacities are based on water filled pipe. Closer hanger spacing may be required where additional valves and fittings increase the load. Eaton 320 B-Line series Pipe Hangers & Supports Reference Data AWWA Ductile Iron Pipe Data Nominal Pipe Size In. (mm) 3" (80) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) 42" (1050) 48" (1200) 54" (1350) Class 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 O.D. of Ductile Iron Pipe In. (mm) 3.96 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 32.00 38.30 44.50 50.80 57.10 (100.6) (121.9) (175.2) (229.9) (281.9) (335.3) (388.6) (441.9) (495.3) (548.6) (655.3) (812.8) (972.8) (1130.3) (1290.3) (1450.3) Wall Thickness In. (mm) .31 (7.9) .32 (8.1) .34 (8.6) .36 (9.1) .38 (9.6) .40 (10.1) .42 (10.6) .43 (10.9) .44 (11.1) .45 (11.4) .47 (11.9) .51 (12.9) .58 (14.7) .65 (16.5) .72 (18.3) .81 (20.6) Based on AWWA C108-70, Table 8.2. Add flange weight for flanged cast iron pipe. Ductile Iron Pipe Size Ductile Iron Pipe Size In. (mm) 3" (80) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) B3110 31/2 4 6 10 12 12 16 18 20 24 30 B3114 31/2 4 6 8 10 12 14 16 18 20 24 B3120 31/2 4 6 8 10 12 14 16 18 20 24 B3122 31/2 4 6 8 10 12 14 16 18 20 24 Ductile Iron Pipe Size In. (mm) 3" (80) 4" (100) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) B3118SL B3119SL B218 2 to 31/2 2 to 31/2 B218 4 to 6 4 to 6 B218 4 to 6 4 to 6 B218 8 to 10 8 to 10 --- 8 to 10 8 to 10 --- 12 to 14 12 to 14 --- 12 to 14 12 to 14 --- 16 to 20 16 to 20 --- 16 to 20 16 to 20 --- 16 to 20 16 to 20 --- 24 24 --- B219 B219-1 B219-2 B219-3 B219-4 B219-4 B219-5 ----------- Reference Data Weight of Pipe Lbs./Ft. (kg/m) 11.2 14.2 22.0 31.0 40.4 50.7 62.4 72.8 83.6 95.2 119.2 161.3 219.5 285.2 360.3 455.0 (16.6) (21.1) (32.7) (46.1) (60.1) (75.4) (92.8) (108.3) (124.4) (141.7) (177.4) (240.0) (326.6) (424.4) (536.2) (677.1) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) 15.0 20.1 35.1 54.0 76.8 103.0 133.5 165.9 201.5 241.0 329.4 487.8 688.8 920.1 1189.2 1502.2 (22.2) (29.9) (52.2) (80.3) (114.2) (153.2) (198.6) (246.8) (299.8) (358.7) (490.2) (597.1) (1025.0) (1369.2) (1769.7) (2135.5) B3122A 31/2 4 6 8 10 12 14 16 18 20 24 B3124 2 to 31/2 4 to 6 4 to 6 8 to 10 8 to 10 12 to 14 12 to 14 16 to 20 16 to 20 16 to 20 --- B3126 2 to 31/2 4 to 6 4 to 6 8 to 10 8 to 10 12 to 14 12 to 14 16 to 20 16 to 20 16 to 20 --- B3117SL 2 to 31/2 4 to 6 4 to 6 8 to 10 8 to 10 12 to 14 12 to 14 16 to 20 16 to 20 16 to 20 24 B379 B479 B3114R B3117R --- --- 31/2 2 to 31/2 --- --- 4 4 to 6 B379 --- 6 4 to 6 B379 --- 8 8 to 10 B379 --- 10 8 to 10 B379 --- 12 12 to 14 B379 --- 14 12 to 14 B379 B479 16 16 to 20 --- B479 18 16 to 20 --- B479 20 16 to 20 --- B479 24 24 B-Line series Pipe Hangers & Supports 321 Eaton Reference Data Reference Data Service Weight Cast Iron Soil Pipe Data (Bell and Spigot Type) Nominal Pipe Size In. (mm) 2" (50) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 15" (380) Based on ASTM A74 - Table 2. O.D. of Cast Iron Pipe In. (mm) 2.25 (57.1) 3.25 (82.5) 4.25 (107.9) 5.25 (133.3) 6.25 (158.7) 8.38 (212.8) 10.50 (266.7) 12.50 (317.5) 15.62 (396.7) Wall Thickness In. (mm) .17 (4.3) .17 (4.3) .18 (4.6) .18 (4.6) .18 (4.6) .23 (5.8) .28 (7.1) .28 (7.1) .31 (7.9) Weight of Pipe Lbs./Ft. (kg/m) 4.0 (5.9) 6.0 (8.9) 8.0 (11.9) 10.4 (15.5) 13.0 (19.3) 20.0 (29.7) 29.0 (43.1) 38.0 (56.5) 51.0 (75.9) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) 5.5 (8.1) 9.4 (13.9) 14.2 (21.1) 22.7 (33.8) 26.9 (40.0) 45.7 (67.9) 69.6 (103.5) 96.2 (143.1) 147.6 (219.6) Extra Weight Cast Iron Soil Pipe Data (Bell and Spigot Type) Nominal Pipe Size In. (mm) 2" (50) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 15" (380) Based on ASTM A74 - Table 1. O.D. of Cast Iron Pipe In. (mm) 2.38 (60.4) 3.50 (88.9) 4.50 (114.3) 5.50 (139.7) 6.50 (165.1) 8.62 (218.9) 10.75 (273.0) 12.75 (323.8) 15.88 (403.3) Wall Thickness In. (mm) .190 (4.8) .250 (6.3) .250 (6.3) .250 (6.3) .250 (6.3) .310 (7.9) .375 (9.5) .375 (9.5) .440 (11.2) Weight of Pipe Lbs./Ft. (kg/m) 5.0 (7.2) 9.0 (13.0) 12.0 (17.4) 15.0 (21.7) 19.0 (27.5) 30.0 (43.4) 43.0 (62.3) 54.0 (78.2) 75.0 (108.6) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) 6.6 (9.5) 12.7 (18.3) 18.5 (26.8) 25.2 (36.5) 33.7 (48.8) 56.1 (81.2) 83.8 (121.4) 112.8 (163.3) 166.8 (241.5) No-Hub Cast Iron Soil Pipe Data Nominal Pipe Size In. (mm) 11/2" (40) 2" (50) 3" (80) 4" (100) 5" (125) 6" (150) 8" (200) O.D. of Cast Iron Pipe In. (mm) 1.90 (48.2) 2.35 (59.7) 3.35 (85.1) 4.38 (111.2) 5.30 (134.6) 6.30 (160.0) 8.38 (212.8) Wall Thickness In. (mm) .16 (4.0) .16 (4.0) .16 (4.0) .19 (4.8) .19 (4.8) .19 (4.8) .23 (5.8) Based on Cast Iron Soil Pipe Institute Standards 301-72, Table 1. Weight of Pipe Lbs./Ft. (kg/m) 2.7 (4.0) 3.6 (5.3) 5.2 (7.7) 7.4 (11.0) 9.6 (14.3) 11.0 (16.3) 18.0 (26.8) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) 6.2 (9.2) 8.6 (12.5) 13.5 (20.0) 20.2 (30.0) 27.5 (41.0) 34.0 (50.5) 57.5 (85.6) Eaton 322 B-Line series Pipe Hangers & Supports Reference Data Copper Tubing (Type L) Data Nominal Pipe Size In. (mm) 1/4" (6) 3/8" (10) 1/2" (15) 5/8" (17) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) O.D. Size In. (mm) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.0) .875 (22.2) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 4.125 5.125 6.125 8.125 (92.1) (104.8) (130.2) (155.6) (206.4) Dimensions taken from ASTM B88-83. Copper Tubing (Type K) Data Nominal Pipe Size In. (mm) 1/4" (6) 3/8" (10) 1/2" (15) 5/8" (17) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) O.D. Size In. (mm) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.0) .875 (22.2) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 4.125 5.125 6.125 8.125 (92.1) (104.8) (130.2) (155.6) (206.4) Dimensions taken from ASTM B88-83. 1 cubic ft. of water weighs 62.41 lbs. 1 cubic meter of water weighs 999.97 kg. 1 gallon (U.S.) weighs 8.335 lbs. 1 liter weighs .999 kg. Reference Data Wall Thickness In. (mm) .030 (.7) .035 (.9) .040 (1.0) .042 (1.0) .045 (1.1) .050 (1.3) .055 (1.4) .060 (1.5) .070 (1.8) .080 (2.0) .090 (2.3) .100 (2.5) .110 (2.8) .125 (3.2) .140 (3.5) .200 (5.1) Weight of Tubing Lbs./Ft. (kg/m) .12 (.17) .20 (.30) .28 (.41) .36 (.53) .45 (.67) .65 (.97) .88 (1.31) 1.14 (1.69) 1.75 (2.60) 2.48 (3.69) 3.33 (4.95) 4.29 (6.38) 5.38 (8.00) 7.61 (11.32) 10.20 (15.18) 19.29 (28.70) Weight of Tubing Filled With Water Lbs./Ft. (kg/m) .15 (.21) .26 (.39) .38 (.56) .51 (.75) .66 (.98) 1.01 (1.50) 1.42 (2.11) 1.91 (2.83) 3.09 (4.59) 4.54 (6.75) 6.28 (9.34) 8.28 (12.32) 10.57 (15.72) 15.69 (23.34) 21.81 (32.46) 39.49 (58.89) Wall Thickness In. (mm) .035 (.9) .049 (1.2) .049 (1.2) .049 (1.2) .065 (1.6) .065 (1.6) .065 (1.6) .072 (1.8) .083 (2.1) .095 (2.4) .109 (2.8) .120 (3.0) .134 (3.4) .160 (4.0) .192 (4.9) .271 (6.9) Weight of Tubing Lbs./Ft. (kg/m) .14 (.21) .27 (.40) .34 (.50) .42 (.62) .64 (.95) .84 (1.25) 1.04 (1.55) 1.36 (2.02) 2.06 (3.06) 2.92 (4.34) 4.00 (5.95) 5.12 (7.62) 6.51 (9.69) 9.67 (14.39) 13.87 (20.60) 25.90 (38.50) Weight of Tubing Filled With Water Lbs./Ft. (kg/m) .17 (.25) .32 (.47) .43 (.63) .56 (.83) .83 (1.23) 1.18 (1.75) 1.57 (2.34) 2.10 (3.12) 3.37 (5.01) 4.92 (7.31) 6.96 (10.35) 9.02 (13.42) 11.57 (17.22) 17.67 (26.29) 25.07 (37.27) 45.40 (67.52) B-Line series Pipe Hangers & Supports 323 Eaton Reference Data Reference Data Recommended Hanger Spacing And Rod Size For Copper Tubing Nominal Tubing Size In. (mm) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) Maximum Span Ft. (Meter) 5 (1.52) 5 (1.52) 6 (1.83) 7 (2.13) 8 (2.44) 8 (2.44) 9 (2.74) 10 (3.05) 11 (3.35) 12 (3.66) 13 (3.96) 14 (4.27) 16 (4.87) Based on MSS-SP-69, Table 3 & 4. Recommended Hanger Rod Size 3/8" - 16 3/8" - 16 3/8" - 16 3/8" - 16 3/8" - 16 3/8" - 16 1/2" - 13 1/2" - 13 1/2" - 13 1/2" - 13 1/2" - 13 5/8" - 11 3/4" - 10 Glass Pipe Data Regular Schedule Nominal Pipe Size In. (mm) 11/2" (40) 2" (50) 3" (80) 4" (100) 6" (150) O.D. Size In. (mm) 1.84 (46.7) 2.34 (59.4) 3.41 (86.6) 4.53 (115.0) 6.66 (169.1) Consult manufacturer for support spacing requirements. Wall Thickness In. (mm) .12 (3.0) .14 (3.5) .17 (4.3) .20 (5.1) .24 (6.1) Heavy Schedule Nominal Pipe Size In. (mm) 1" (25) 11/2" (40) 2" (50) 3" (80) 4" (100) 6" (150) O.D. Size In. (mm) 1.31 (33.3) 1.84 (46.7) 2.34 (59.4) 3.41 (86.6) 4.53 (115.0) 6.66 (169.1) Consult manufacturer for support spacing requirements. 1 cubic ft. of water weighs 62.41 lbs. 1 cubic meter of water weighs 999.97 kg. 1 gallon (U.S.) weighs 8.335 lbs. 1 liter weighs .999 kg. Wall Thickness In. (mm) .16 (4.0) .17 (4.3) .17 (4.3) .20 (5.1) .26 (6.6) .33 (8.4) Weight of Pipe Lbs./Ft.(kg/m) .6 (.9) .9 (1.4) 1.6 (2.4) 2.6 (3.8) 4.7 (7.0) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) 1.5 (2.2) 2.3 (3.5) 4.8 (7.1) 8.4 (12.4) 17.5 (26.0) Weight of Pipe Lbs./Ft.(kg/m) .6 (.9) .8 (1.3) 1.1 (1.6) 2.0 (3.0) 3.4 (5.0) 6.3 (9.4) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) .9 (1.4) 1.5 (2.4) 2.4 (3.6) 5.0 (7.5) 8.8 (13.1) 18.7 (27.9) Eaton 324 B-Line series Pipe Hangers & Supports Reference Data Schedule 40 PVC Plastic Pipe Data Nominal Pipe Size In. (mm) 1/8" (3) 1/4" (6) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) Pipe O.D. In. (mm) .405 (10.3) .540 (13.7) .675 (17.1) .840 1.050 1.315 1.660 (21.3) (26.7) (33.4) (42.1) 1.900 (48.2) 2.375 (60.3) 2.875 (73.0) 3.500 (88.9) 4.000 (101.6) 4.500 (114.3) 5.563 (141.3) 6.625 (168.3) 8.625 (219.1) 10.750 (273.0) 12.750 (323.8) Schedule 80 PVC Plastic Pipe Data Nominal Pipe Size In. (mm) 1/8" (3) 1/4" (6) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) Pipe O.D. In. (mm) .405 (10.3) .540 (13.7) .675 (17.1) .840 (21.3) 1.050 1.315 1.660 (26.7) (33.4) (42.1) 1.900 (48.2) 2.375 (60.3) 2.875 (73.0) 3.500 (88.9) 4.000 (101.6) 4.500 (114.3) 5.563 (141.3) 6.625 (168.3) 8.625 (219.1) 10.750 (273.0) 12.750 (323.8) 1 cubic ft. of water weighs 62.41 lbs. 1 cubic meter of water weighs 999.97 kg. 1 gallon (U.S.) weighs 8.335 lbs. 1 liter weighs .999 kg. Wall Thickness In. (mm) .068 (1.7) .088 (2.2) .091 (2.3) .109 (2.7) .113 (2.9) .133 (3.4) .140 (3.5) .145 (3.7) .154 (3.9) .203 (5.1) .216 (5.5) .226 (5.7) .237 (6.0) .258 (6.5) .280 (7.1) .322 (8.2) .366 (9.3) .406 (10.3) Wall Thickness In. (mm) .095 (2.4) .119 (3.0) .126 (3.2) .147 (3.7) .154 (3.9) .179 (4.5) .191 (4.8) .200 (5.1) .218 (5.5) .276 (7.0) .300 (7.6) .318 (8.1) .337 (8.5) .375 (9.5) .432 (11.0) .500 (12.7) .593 (15.0) .687 (17.4) Reference Data Weight of Pipe Lbs./Ft. (kg/m) .04 (.06) .07 (.11) .10 (.14) .15 (.20) .20 (.30) .30 (.40) .40 (.60) .50 (.70) .60 (90) 1.00 (1.50) 1.30 (2.00) 1.60 1.90 2.80 3.30 5.30 7.50 10.00 (2.40) (2.80) (4.10) (4.90) (7.80) (11.10) (14.90) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) .06 (.09) .11 (.17) .18 (.26) .25 (.40) .40 (.60) .70 (.90) 1.00 (1.50) 1.40 (2.00) 2.00 (3.00) 3.10 (4.51) 4.50 (6.70) 5.90 7.40 11.40 15.40 26.90 41.60 58.50 (8.70) (11.00) (17.00) (23.00) (39.90) (61.80) (87.00) Weight of Pipe Lbs./Ft. (kg/m) .05 (.08) .09 (.14) .10 (.19) .10 (.20) .20 (.40) .40 (.50) .50 (.80) .60 (.90) .90 (1.30) 1.30 (2.00) 1.80 (2.70) 2.20 2.60 4.10 5.00 8.00 11.90 16.30 (3.20) (3.90) (6.10) (7.50) (11.90) (17.70) (24.30) Weight of Pipe Filled With Water Lbs./Ft. (kg/m) .06 (.10) .12 (.18) .16 (.28) .20 (.30) .40 (.70) .70 (.90) 1.00 (1.60) 1.30 (2.00) 2.20 (3.20) 3.10 (4.70) 4.60 (6.90) 6.00 (8.90) 7.60 (11.30) 12.00 (17.80) 16.30 (24.30) 27.80 (41.30) 43.20 (77.60) 60.30 (89.80) B-Line series Pipe Hangers & Supports 325 Eaton Reference Data Reference Data Spacing Of Hangers For Schedule 40 PVC Plastic Pipe Temperature Support Spacing in Ft. (Meter) For Pipe Sizes of 1/2"-3/4" (15-20mm) 1"-11/4" (25-32mm) 11/2"-2" (40-50mm) 21/2" (65mm) 3" (80mm) 20�F (-6.6�C) 5.00 (1.52) 5.50 (1.67) 5.80 (1.77) 6.66 (2.03) 6.80 (2.07) 40�F (4.4�C) 4.75 (1.45) 5.25 (1.60) 5.50 (1.67) 6.33 (1.93) 6.50 (1.98) 60�F (15.5�C) 4.50 (1.37) 5.00 (1.52) 5.25 (1.60) 6.00 (1.83) 6.25 (1.90) 80�F (26.6�C) 4.25 (1.29) 4.66 (1.42) 5.00 (1.52) 5.50 (1.67) 5.80 (1.77) 100�F (37.8�C) 4.00 (1.22) 4.33 (1.32) 4.66 (1.42) 5.25 (1.60) 5.50 (1.67) 110�F (43.3�C) 3.75 (1.14) 4.00 (1.22) 4.33 (1.32) 4.80 (1.46) 5.25 (1.60) 120�F (48.9�C) 3.33 (1.01) 3.75 (1.14) 3.80 (1.16) 4.50 (1.37) 4.75 (1.45) 130�F (54.4�C) 3.00 (.91) 3.33 (1.01) 3.50 (1.06) 4.00 (1.22) 4.25 (1.29) 140�F (60.0�C) 2.66 (.81) 2.80 (.85) 3.00 (.91) 3.50 (1.16) 3.66 (1.11) 150�F (65.5�C) 2.00 (.61) 2.25 (.68) 2.50 (.76) 2.80 (.85) 3.00 (.91) 4" (100mm) 7.33 (2.23) 7.00 (2.13) 6.50 (1.98) 6.25 (1.90) 5.80 (1.77) 5.50 (1.67) 5.00 (1.52) 4.50 (1.37) 3.80 (1.16) 3.25 (.99) 6" (150mm) 7.80 (2.38) 7.50 (2.28) 7.00 (2.13) 6.80 (2.07) 6.33 (1.93) 5.80 (1.77) 5.33 (1.62) 4.80 (1.46) 4.25 (1.29) 3.50 (1.06) Spacing Of Hangers For Schedule 80 PVC Plastic Pipe Temperature 20�F (-6.6�C) 1/2"-3/4" (15-20) 5.75 (1.75) 1" (25) 6.33 (1.93) Support Spacing in Ft. (Meter) For Pipe Sizes of 11/4"-11/2" (32-40) 2" (50) 21/2" (65) 3" (80) 6.66 (2.03) 7.00 (2.13) 7.80 (2.38) 8.20 (2.50) 40�F (4.4�C) 5.50 (1.67) 6.00 (1.83) 6.33 (1.93) 6.50 (1.98) 7.50 (2.28) 7.75 (2.36) 60�F (15.5�C) 5.25 (1.60) 5.75 (1.75) 6.00 (1.83) 6.25 (1.90) 7.00 (2.13) 7.33 (2.23) 80�F (26.6�C) 4.80 (1.46) 5.33 (1.62) 5.66 (1.72) 6.00 (1.83) 6.66 (2.03) 7.00 (2.13) 100�F (37.8�C) 4.50 (1.37) 5.00 (1.52) 5.25 (1.60) 5.50 (1.67) 6.33 (1.93) 6.50 (1.98) 110�F (43.3�C) 4.33 (1.32) 4.60 (1.40) 4.80 (1.46) 5.12 (1.56) 5.80 (1.77) 6.00 (1.83) 120�F (48.9�C) 3.80 (1.16) 4.33 (1.32) 4.50 (1.37) 4.75 (1.45) 5.33 (1.62) 5.50 (1.67) 130�F (54.4�C) 3.50 (1.06) 3.80 (1.16) 4.00 (1.22) 4.33 (1.32) 4.75 (1.45) 5.00 (1.52) 140�F (60.0�C) 3.00 (.91) 3.33 (1.01) 3.50 (1.06) 3.66 (1.11) 4.25 (1.29) 4.33 (1.32) 150�F (65.5�C) 2.50 (.76) 2.75 (.84) 3.00 (.91) 3.12 (.95) 3.33 (1.01) 3.50 (1.06) 4" (100) 8.66 (2.64) 8.25 (2.51) 7.80 (2.38) 7.33 (2.23) 6.80 (2.07) 6.33 (1.93) 5.80 (1.77) 5.25 (1.60) 4.66 (1.42) 3.75 (1.14) 6" (150) 9.80 (2.99) 9.33 (2.84) 8.80 (2.68) 8.33 (2.54) 7.80 (2.38) 7.33 (2.23) 6.50 (1.98) 6.00 (1.83) 5.12 (1.55) 4.25 (1.29) Hanger spacing for PVC plastic Pipe assumes fluid loads up to 1.35 specific gravity [85 Lbs./Ft.3 (136.5 kg/m3)] but not concentrated heavy loads. Eaton 326 B-Line series Pipe Hangers & Supports Reference Data Load Chart For Threaded Rod (ATR) Rod Size Root Area Thread In.2 (cm2) Maximum Safe Loads 650�F (349�C) 750�F (399�C) Lbs. (kN) Lbs. (kN) 3/8"-16 0.068 (.43) 730 (3.24) 572 (2.54) 1/2"-13 0.126 (.81) 1350 (6.00) 1057 (4.70) 5/8"-11 0.202 (1.30) 2160 (9.60) 1692 (7.52) 3/4"-10 0.302 (1.95) 3230 (14.37) 2530 (11.25) 7/8"-9 0.419 (2.70) 4480 (19.93) 3508 (15.60) 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 21/4"-41/2 21/2"-4 23/4"-4 0.551 (3.55) 0.693 (4.47) 0.890 (5.74) 1.29 (8.32) 1.74 (11.22) 2.30 (14.84) 3.02 (19.48) 3.72 (24.00) 4.62 (29.80) 5900 (26.24) 7450 (33.14) 9500 (42.25) 13800 (61.38) 18600 (82.73) 24600 (109.42) 32300 (143.67) 39800 (177.03) 49400 (219.73) 4620 (20.55) 5830 (25.93) 7440 (33.09) 10807 (48.07) 14566 (64.79) 19625 (87.29) 25295 (112.51) 31169 (138.64) 38687 (172.08) 3"-4 5.62 (36.26) 60100 (267.32) 47066 (209.35) 31/4"-8UN 31/2"-8UN 33/4"-8UN 6.72 (43.35) 7.92 (51.09) 9.21 (59.42) 71900 (319.81) 84700 (376.74) 98500 (438.13) 56307 (250.45) 66331 (295.04) 77139 (138.64) Extracted from MSS SP-58, 2002, with permission of the publisher, the Manufacturers Standardization Society. Reference Data Rod Size As Determined By Steel Pipe Size For Fire Protection Steel Pipe Size In. (mm) 1"-11/4" (25-30) 11/2"-4" (40-100) 5"-8" (125-200) 10"-12" (250-300) Maximum Span Ft. (m) 12 (3.66) 15 (4.57) 15 (4.57) 15 (4.57) Rod Size 3/8"-16 3/8"-16 1/2"-13 5/8"-11 Based on NFPA 13-1999, Table 6-2.2 & Table 6-1.4.1 Rod Size As Determined By Copper Tubing Size For Fire Protection Copper Tubing Size In. (mm) Maximum Span Ft. (m) 3/4"-1" (20-35) 11/4"-11/2" (32-40) 8 (2.44) 15 (3.05) 2"-3" (50-80) 31/2"-4" (90-100) 15 (3.66) 15 (4.57) 5"-8" (125-200) 15 (4.57) Rod Size 3/8"-16 3/8"-16 3/8"-16 3/8"-16 1/2"-13 Based on NFPA 13-1999, Table 6-2.2 & Table 6-1.4.1 B-Line series Pipe Hangers & Supports 327 Eaton Reference Data Reference Data Wide Flange I-Beams Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) W4 x 13 (W100 x 19.3) W5 x 16 (W130 x 23.8) W5 x 19 (W130 x 28.1) W6 x 9 (W150 x 13.5) W6 x 12 (W150 x 18.0) W6 x 16 (W150 x 24.0) W6 x 20 (W150 x 29.8) W6 x 25 (W150 x 37.1) W8 x 10 (W200 x 15.0) W8 x 13 (W200 x 19.3) W8 x 15 (W200 x 22.5) W8 x 18 (W200 x 26.6) W8 x 21 (W200 x 31.3) W8 x 24 (W200 x 35.9) W8 x 28 (W200 x 41.7) W8 x 31 (W200 x 46.1) W8 x 35 (W200 x 52) W8 x 40 (W200 x 59) W8 x 48 (W200 x 71) W8 x 58 (W200 x 86) W8 x 67 (W200 x 100) W10 x 12 (W250 x 17.9) W10 x 15 (W250 x 22.3) W10 x 17 (W250 x 25.3) W10 x 19 (W250 x 28.4) W10 x 22 (W250 x 32.7) W10 x 26 (W250 x 38.5) W10 x 30 (W250 x 44.8) W10 x 33 (W250 x 49.1) W10 x 39 (W250 x 58) W10 x 45 (W250 x 67) W10 x 49 (W250 x 73) W10 x 54 (W250 x 80) W10 x 60 (W250 x 89) W10 x 68 (W250 x 101) W10 x 77 (W250 x 115) W10 x 88 (W250 x 131) W10 x 100 (W250 x 149) W10 x 112 (W250 x 167) Flange Width bf In. (mm) 41/16" (103) 5" (127) 5" (128) 315/16" (100) 4" (101) 4" (101) 6" (153) 61/16" (154) 315/16" (100) 4" (101) 4" (101) 51/4" (133) 51/4" (133) 61/2" (165) 61/2" (166) 8" (203) 8" (203) 81/16" (205) 81/8" (206) 81/4" (209) 81/4" (210) 4" (101) 4" (101) 4" (101) 4" (101) 53/4" (146) 53/4" (147) 513/16" (148) 715/16" (202) 8" (203) 8" (203) 10" (254) 101/16" (255) 101/16" (256) 101/8" (257) 103/16" (259) 101/4" (261) 103/8" (263) 107/16" (265) Dimensions taken from ASTM A6-86. Flange Thickness tf In. (mm) 0.345 (8.8) 0.360 (9.1) 0.430 (10.9) 0.215 (5.5) 0.280 (7.1) 0.405 (10.3) 0.365 (9.3) 0.455 (11.6) 0.205 (5.2) 0.255 (6.5) 0.315 (8.0) 0.330 (8.4) 0.400 (10.2) 0.400 (10.2) 0.465 (11.8) 0.435 (11.0) 0.495 (12.6) 0.560 (14.2) 0.685 (17.4) 0.810 (20.6) 0.935 (23.7) 0.210 (5.3) 0.270 (6.9) 0.330 (8.4) 0.395 (10.0) 0.360 (9.1) 0.440 (11.2) 0.510 (13.0) 0.435 (11.0) 0.530 (13.5) 0.620 (15.7) 0.560 (14.2) 0.615 (15.6) 0.680 (17.3) 0.770 (19.6) 0.870 (22.1) 0.990 (25.1) 1.120 (28.4) 1.250 (31.8) Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) W12 x 14 (W310 x 21.0) W12 x 16 (W310 x 23.8) W12 x 19 (W310 x 28.3) W12 x 22 (W310 x 32.7) W12 x 26 (W310 x 38.7) W12 x 30 (W310 x 44.5) W12 x 35 (W310 x 52) W12 x 40 (W310 x 60) W12 x 45 (W310 x 67) W12 x 50 (W310 x 74) W12 x 53 (W310 x 79) W12 x 58 (W310 x 86) W12 x 65 (W310 x 97) W12 x 72 (W310 x 107) W12 x 79 (W310 x 117) W12 x 87 (W310 x 129) W12 x 96 (W310 x 143) W12 x 106 (W310 x 158) W12 x 120 (W310 x 179) W12 x 136 (W310 x 202) W12 x 152 (W310 x 226) W12 x 170 (W310 x 253) W12 x 190 (W310 x 283) W12 x 210 (W310 x 313) W12 x 230 (W310 x 342) W12 x 252 (W310 x 375) W14 x 22 (W360 x 32.9) W14 x 26 (W360 x 39.0) W14 x 30 (W360 x 44.8) W14 x 34 (W360 x 51) W14 x 38 (W360 x 57) W14 x 43 (W360 x 64) W14 x 48 (W360 x 72) W14 x 53 (W360 x 79) W14 x 61 (W360 x 91) W14 x 68 (W360 x 101) W14 x 74 (W360 x 110) W14 x 82 (W360 x 122) W14 x 90 (W360 x 134) Flange Width bf In. (mm) 4" (101) 4" (101) 4" (101) 4" (101) 61/2" (165) 61/2" (165) 69/16" (167) 8" (203) 81/16" (205) 81/16" (205) 10" (254) 10" (254) 12" (306) 12" (306) 121/16" (307) 121/8" (308) 121/8" (308) 121/4" (310) 125/16" (313) 123/8" (315) 121/2" (317) 129/16" (319) 1211/16" (322) 123/4" (325) 127/8" (328) 13" (330) 5" (127) 5" (127) 63/4" (172) 63/4" (172) 63/4" (172) 8" (202) 8" (202) 81/16" (205) 10" (254) 10" (254) 101/16" (256) 101/8" (257) 141/2" (369) Flange Thickness tf In. (mm) 0.225 (5.7) 0.265 (6.7) 0.350 (8.9) 0.425 (10.8) 0.380 (9.7) 0.440 (11.2) 0.520 (13.2) 0.515 (13.1) 0.575 (14.6) 0.640 (16.3) 0.575 (14.6) 0.640 (16.3) 0.605 (15.4) 0.670 (17.0) 0.735 (18.7) 0.810 (20.6) 0.900 (22.9) 0.990 (25.1) 1.105 (28.1) 1.250 (31.8) 1.400 (35.6) 1.560 (39.6) 1.735 (44.1) 1.900 (48.3) 2.070 (52.6) 2.250 (57.2) 0.335 (8.5) 0.420 (10.7) 0.385 (9.8) 0.455 (11.6) 0.515 (13.1) 0.530 (13.5) 0.595 (15.1) 0.660 (16.8) 0.645 (16.4) 0.720 (18.3) 0.785 (19.9) 0.855 (21.7) 0.710 (18.0) (Continued on next page) Eaton 328 B-Line series Pipe Hangers & Supports Reference Data Wide Flange I-Beams (Continued) Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) W14 x 99 (W360 x 147) W14 x 109 (W360 x 162) W14 x 120 (W360 x 179) W14 x 132 (W360 x 196) W14 x 145 (W360 x 216) W14 x 159 (W360 x 237) W14 x 176 (W360 x 262) W14 x 193 (W360 x 287) W14 x 211 (W360 x 314) W14 x 233 (W360 x 347) W14 x 257 (W360 x 382) W14 x 283 (W360 x 421) W14 x 311 (W360 x 463) W14 x 342 (W360 x 509) W14 x 370 (W360 x 551) W14 x 398 (W360 x 592) W14 x 426 (W360 x 634) W16 x 26 (W410 x 38.8) W16 x 31 (W410 x 46.1) W16 x 36 (W410 x 53) W16 x 40 (W410 x 60) W16 x 45 (W410 x 67) W16 x 50 (W410 x 75) W16 x 57 (W410 x 85) W16 x 67 (W410 x 100) W16 x 77 (W410 x 114) W16 x 89 (W410 x 132) W16 x 100 (W410 x 149) W18 x 35 (W460 x 52) W18 x 40 (W460 x 60) W18 x 46 (W460 x 68) W18 x 50 (W460 x 74) W18 x 55 (W460 x 82) W18 x 60 (W460 x 89) W18 x 65 (W460 x 97) W18 x 71 (W460 x 106) W18 x 76 (W460 x 113) W18 x 86 (W460 x 128) W18 x 97 (W460 x 144) W18 x 106 (W460 x 158) W18 x 119 (W460 x 177) W21 x 44 (W530 x 66) W21 x 50 (W530 x 74) W21 x 57 (W530 x 85) W21 x 62 (W530 x 92) W21 x 68 (W530 x 101) Flange Width bf In. (mm) 149/16" (370) 145/8" (371) 1411/16" (373) 143/4" (374) 151/2" (394) 159/16" (395) 155/8" (397) 153/4" (400) 153/4" (400) 157/8" (403) 16" (406) 161/8" (409) 161/4" (413) 163/8" (416) 161/2" (419) 169/16" (421) 1611/16" (424) 51/2" (140) 51/2" (140) 7" (178) 7" (178) 7" (178) 71/16" (179) 71/8" (181) 101/4" (260) 105/16" (262) 103/8" (263) 107/16" (265) 6" (152) 6" (152) 61/16" (154) 71/2" (190) 71/2" (190) 79/16" (192) 79/16" (192) 75/8" (193) 11" (279) 111/16" (281) 111/8" (282) 113/16" (284) 111/4" (286) 61/2" (165) 61/2" (165) 69/16" (167) 81/4" (209) 81/4" (209) Flange Thickness tf In. (mm) 0.780 (19.8) 0.860 (21.8) 0.940 (23.9) 1.030 (26.2) 1.090 (27.7) 1.190 (30.2) 1.310 (33.3) 1.440 (36.6) 1.560 (39.6) 1.720 (43.7) 1.890 (48.0) 2.070 (52.6) 2.260 (57.4) 2.470 (62.7) 2.660 (67.6) 2.845 (72.3) 3.035 (77.1) 0.345 (8.8) 0.440 (11.2) 0.430 (10.9) 0.505 (12.8) 0.565 (14.4) 0.630 (16.0) 0.715 (18.2) 0.665 (16.9) 0.760 (19.3) 0.875 (22.2) 0.985 (25.0) 0.425 (10.8) 0.525 (13.3) 0.605 (15.4) 0.570 (14.5) 0.630 (16.0) 0.695 (17.7) 0.750 (19.0) 0.810 (20.6) 0.680 (17.3) 0.770 (19.6) 0.870 (22.1) 0.940 (23.9) 1.060 (26.9) 0.450 (11.4) 0.535 (13.6) 0.650 (16.5) 0.615 (15.6) 0.685 (17.4) Reference Data Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) W21 x 73 (W530 x 109) W21 x 83 (W530 x 123) W21 x 93 (W530 x 138) W21 x 101 (W530 x 150) W21 x 111 (W530 x 165) W21 x 122 (W530 x 182) W21 x 132 (W530 x 196) W21 x 147 (W530 x 219) W24 x 55 (W610 x 82) W24 x 62 (W610 x 92) W24 x 68 (W610 x 101) W24 x 76 (W610 x 113) W24 x 84 (W610 x 125) W24 x 94 (W610 x 140) W24 x 104 (W610 x 155) W24 x 117 (W610 x 174) W24 x 131 (W610 x 195) W24 x 146 (W610 x 217) W24 x 162 (W610 x 241) W27 x 84 (W690 x 125) W27 x 94 (W690 x 140) W27 x 102 (W690 x 152) W27 x 114 (W690 x 170) W27 x 146 (W690 x 217) W27 x 161 (W690 x 240) W27 x 178 (W690 x 265) W30 x 99 (W760 x 147) W30 x 108 (W760 x 161) W30 x 116 (W760 x 173) W30 x 124 (W760 x 185) W30 x 132 (W760 x 196) W30 x 173 (W760 x 257) W30 x 191 (W760 x 284) W30 x 211 (W760 x 314) W33 x 118 (W840 x 176) W33 x 130 (W840 x 193) W33 x 141 (W840 x 210) W33 x 152 (W840 x 226) W33 x 201 (W840 x 299) W36 x 135 (W920 x 201) W36 x 150 (W920 x 223) W36 x 160 (W920 x 238) W36 x 170 (W920 x 253) W36 x 182 (W920 x 271) W36 x 194 (W920 x 289) W36 x 210 (W920 x 313) Flange Width bf In. (mm) 81/4" (209) 87/8" (213) 87/16" (214) 121/4" (311) 123/8" (314) 123/8" (314) 127/16" (316) 121/2" (317) 7" (178) 71/16" (179) 815/16" (227) 9" (228) 9" (228) 91/16" (230) 123/4" (324) 123/4" (324) 127/8" (327) 127/8" (327) 1215/16" (328) 915/16" (252) 10" (254) 10" (254) 101/16" (255) 1315/16" (354) 14" (355) 141/16" (357) 107/16" (265) 101/2" (267) 101/2" (267) 101/2" (267) 109/16" (268) 15" (381) 15" (381) 151/8" (384) 111/2" (292) 111/2" (292) 111/2" (292) 119/16" (294) 153/4" (400) 1115/16" (303) 12" (305) 12" (305) 12" (305) 121/16" (306) 121/8" (308) 123/16" (309) Flange Thickness tf In. (mm) 0.740 (18.8) 0.835 (21.2) 0.930 (23.6) 0.800 (20.3) 0.875 (22.2) 0.960 (24.4) 0.035 (26.3) 0.150 (29.2) 0.505 (12.8) 0.590 (15.0) 0.585 (14.9) 0.680 (17.3) 0.770 (19.6) 1.875 (22.2) 1.750 (19.0) 0.850 (21.6) 0.960 (24.4) 1.090 (27.7) 1.220 (31.0) 0.640 (16.3) 0.745 (18.9) 0.830 (21.1) 0.930 (23.6) 0.975 (24.8) 1.080 (27.4) 1.190 (30.2) 0.670 (17.0) 0.760 (19.3) 0.850 (21.6) 0.930 (23.6) 1.000 (25.4) 1.065 (27.1) 1.185 (30.1) 1.315 (33.4) 0.740 (18.8) 0.855 (21.7) 0.960 (24.4) 1.055 (26.8) 1.150 (29.2) 0.790 (20.1) 0.940 (23.9) 1.020 (25.9) 1.100 (27.9) 1.180 (30.0) 1.260 (32.0) 1.360 (34.5) B-Line series Pipe Hangers & Supports 329 Eaton Reference Data Reference Data American Standard 'S' Shape I-Beams Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) S3 x 5.7 (S75 x 8.5) S3 x 7.5 (S75 x 11.2) S4 x 7.7 (S100 x 11.5) S4 x 9.5 (S100 x 14.1) S5 x 10 (S130 x 15) S5 x 14.75 (S130 x 22) S6 x 12.5 (S150 x 18.6) S6 x 17.25 (S150 x 25.7) S7 x 15.3 (S180 x 22.8) S7 x 20 (S180 x 29.8) S8 x 18.4 (S200 x 27.4) S8 x 23 (S200 x 34) S10 x 25.4 (S250 x 37.8) S10 x 35 (S250 x 52) S12 x 31.8 (S310 x 47.3) S12 x 35 (S310 x 52) S12 x 40.8 (S310 x 60.7) S12 x 50 (S310 x 74) S15 x 42.9 (S380 x 64) S15 x 50 (S380 x 74) S18 x 54.7 (S460 x 81.4) S18 x 70 (S460 x 104) S20 x 66 (S510 x 98.2) S20 x 75 (S510 x 112) S20 x 86 (S510 x 128) S20 x 96 (S510 x 143) S24 x 80 (S610 x 119) S24 x 90 (S610 x 134) S24 x 100 (S610 x 149) S24 x 106 (S610 x 158) S24 x 121 (S610 x 180) Dimensions taken from ASTM A6-86. Flange Width bf In. (mm) 23/8" (59) 21/2" (63) 25/8" (68) 23/4" (71) 3" (76) 31/4" (83) 33/8" (85) 311/16" (91) 35/8" (93) 37/8" (98) 4" (102) 41/8" (106) 45/8" (118) 415/16" (126) 5" (127) 51/16" (129) 51/4" (133) 51/2" (139) 51/2" (140) 55/8" (143) 6" (152) 61/4" (159) 61/4" (159) 63/8" (162) 71/16" (179) 73/16" (183) 7" (178) 71/8" (181) 71/4" (184) 77/8" (200) 81/16" (204) Flange Thickness tf In. (mm) 0.260 (6.6) 0.260 (6.6) 0.293 (7.4) 0.293 (7.4) 0.326 (8.3) 0.326 (8.3) 0.359 (9.1) 0.359 ((9.1) 0.392 (10.0) 0.392 (10.0) 0.425 (10.8) 0.425 (10.8) 0.491 (12.5) 0.491 (12.5) 0.544 (13.8) 0.544 (13.8) 0.659 (16.7) 0.659 (16.7) 0.622 (15.8) 0.622 (15.8) 0.691 (17.6) 0.691 (17.6) 0.795 (20.2) 0.795 (20.2) 0.920 (23.4) 0.920 (23.4) 0.870 (22.1) 0.870 (22.1) 0.870 (22.1) 1.090 (27.7) 1.090 (27.7) Eaton 330 B-Line series Pipe Hangers & Supports Reference Data Reference Data American Standard 'C' Shape I-Beams Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) C3 x 4.1 (C75 x 6.1) C3 x 5 (C75 x 7.4) C3 x 6 (C75 x 8.9) C4 x 5.4 (C100 x 8) C4 x 7.25 (C100 x 10.8) C5 x 6.7 (C130 x 10) C5 x 9 (C130 x 13.4) C6 x 8.2 (C150 x 12.2) C6 x 10.5 (C150 x 15.6) C6 x 13 (C150 x 19.3) C7 x 9.8 (C180 x 14.6) C7 x 12.25 (C180 x 18.2) C7 x 14.75 (C180 x 22) C8 x 11.5 (C200 x 17.1) C8 x 13.75 (C200 x 20.5) C8 x 18.75 (C200 x 27.9) C9 x 13.4 (C230 x 19.9) C9 x 15 (C230 x 22) C9 x 20 (C230 x 30) C10 x 15.3 (C250 x 22.8) C10 x 20 (C250 x 30) C10 x 25 (C250 x 37) C10 x 30 (C250 x 45) C12 x 20.7 (C310 x 30.8) C12 x 25 (C310 x 37) C12 x 30 (C310 x 45) C15 x 33.9 (C380 x 50.4) C15 x 40 (C380 x 60) C15 x 50 (C380 x 74) C18 x 42.7 (C460 x 63.5) C18 x 45.8 (C460 x 68.1) C18 x 51.9 (C460 x 77.2) C18 x 58 (C460 x 86.3) Flange Width bf In. (mm) 13/8" (35) 11/2" (37) 15/8" (40) 19/16" (40) 13/4" (44) 13/4" (44) 17/8" (47) 115/16" (48) 2" (51) 21/8" (54) 21/16" (54) 23/16" (55) 21/4" (57) 21/4" (57) 23/8" (59) 21/2" (63) 27/16" (61) 21/2" (63) 25/8" (67) 25/8" (67) 23/4" (69) 27/8" (72) 3" (76) 215/16" (74) 3" (76) 31/8" (80) 33/8" (86) 31/2" (89) 33/4" (94) 4" (102) 4" (102) 41/8" (106) 41/4" (112) Flange Thickness tf In. (mm) 0.273 (6.9) 0.273 (6.9) 0.273 (6.9) 0.296 (7.5) 0.296 (7.5) 0.320 (8.1) 0.320 (8.1) 0.343 (8.7) 0.343 (8.7) 0.343 (8.7) 0.366 (9.3) 0.366 (9.3) 0.366 (9.3) 0.390 (9.9) 0.390 (9.9) 0.390 (9.9) 0.413 (10.5) 0.413 (10.5) 0.413 (10.5) 0.436 (11.1) 0.436 (11.1) 0.436 (11.1) 0.436 (11.1) 0.501 (12.7) 0.501 (12.7) 0.501 (12.7) 0.650 (16.5) 0.650 (16.5) 0.650 (16.5) 0.625 (15.8) 0.625 (15.8) 0.625 (15.8) 0.625 (15.8) B-Line series Pipe Hangers & Supports 331 Eaton Reference Data Reference Data Trapeze Hangers Using B-Line series Strut Or Angle Iron Trapeze Length in. (mm) 18" (457.2) 24" (609.6) 30" (762.0) 36" (914.4) 48" (1219.2) 60" (1524.0) 72" (1828.8) 84" (2133.6) 96" (2438.4) 108" (2743.2) 120" (3048.0) 21/2" (65) or less 11/2" x 11/2" x 3/16" B26SH 11/2" x 11/2" x 3/16" B26SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH Nominal Pipe Size 3" (80) 31/2" (90) 11/2" x 11/2" x 3/16" B26SH 11/2" x 11/2" x 3/16" B26SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b). 4" (100) 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA Eaton 332 B-Line series Pipe Hangers & Supports Reference Data Reference Data Trapeze Hangers Using B-Line series Strut Or Angle Iron cont. Trapeze Length in. (mm) 18" (457.2) 24" (609.6) 30" (762.0) 36" (914.4) 48" (1219.2) 60" (1524.0) 72" (1828.8) 84" (2133.6) 96" (2438.4) 108" (2743.2) 120" (3048.0) 21/2" (65) or less 2" x 11/2" x 3/16" B22SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA Nominal Pipe Size 3" (80) 31/2" (90) 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 3/16" B11SH 31/2" x 21/2" x 1/4" B12SHA 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 5" x 31/2" x 5/16" B11SHA 6" x 4" x 1/4" B12SHA4 Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b). 4" (100) 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 5" x 31/2" x 5/16" B11SHA 6" x 4" x 1/4" B12SHA4 6" x 4" x 1/4" B12SHA4 6" x 4" x 3/8" B11SHA4 6" x 4" x 3/8" B11SHA4 B-Line series Pipe Hangers & Supports 333 Eaton Reference Data Reference Data MSS To B-Line series & Federal Specification Cross Reference MSS SP-69 MSS SP-58 Type 1 Type 1 Type 1 Type 1 Type 1* Type 1 Type 1 Type 1 Type 1 Type 3 Type 3 Type 4 Type 4 Type 4 Type 5 Type 5 Type 5 Type 6 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 12 Type 12 Type 12 Type 12 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 18 Type 18 Type 18 Type 18 Type 18 Type 19 Type 19 Type 19 Type 19 Type 19 Type 19 Type 19 Type 19 B-Line series Part No. B3100 B3100C B3100F B3102 B3104 B3104CT B3106 B3108 B3109 B3144 B3146 B3140 B3141 B3142 B3690 B3690C B3690F B3171 B3373 B3373C B3373CT B3373CTC 200 200C 200F 200H 2 B3170CT B3170CTC 2F B3198H B3198HCT B3198R B3198RCT B3202 B3201 B3224 B3224CT B3222 B3200 B22I, B32I, B52I B2500 B2503 B2505-B2508 B3014 65 65XT 66 67SS 68S 68SS 68W B303-B309 A-A-1192A WW-H-171E Type 1 Type 1 Type 1 Type 1 Type 12 Type 12 -Type 1 -Type 3 Type 3 Type 4 Type 4 Type 4 ---Type 6 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 25 Type 25 Type 25 Type 25 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 -Type 19 --Type 18 Type 23 Type 23 Type 23 -Type 23 -Type 23 Type 19 * For all finishes excluding plain. MSS SP-69 MSS SP-58 Type 19 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 Type 22 Type 23 Type 23 Type 23 Type 24 Type 24 Type 25 Type 26 Type 26 Type 26 Type 27 Type 28 Type 29 Type 30 Type 31 Type 31 Type 32 Type 33 Type 34 Type 34 Type 34 Type 34 Type 34 Type 35 Type 35 Type 36 Type 37 Type 37 Type 37 Type 37 Type 38 Type 38 Type 39A & 39B Type 40 Type 41 Type 41 Type 41 Type 43 Type 44 Type 44 Type 45 Type 46 Type 48 Type 49 Type 57 B-Line series Part No. B321 B3031 B3033 B3034 B3050 B3055 B3083 B351L B3036L B3037 B3188 B3188C B3045 B2400 B3180 B3180FL B3040 B3291, B3292 B3294, B3296 B3298 B3293, B3295 B3297 B3054 B3065 B3068 B3066 B3067 B3058 B3060 B3060L B3062 B3070 B3891-B3897 B3991 & B3993 B3095 B3090 B3092 B3094 B3097 B3093 B3096 B3160-B3165 B3151 B3114 B3122 B3122A B3110 B3117SL B3120 B3119SL B3118SL B3262 B3264 B3080S & L A-A-1192A WW-H-171E Type 19 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 Type 22 Type 23 Type 23 Type 23 Type 24 Type 24 Type 53 Type 26 Type 26 Type 26 Type 54 Type 28 Type 29 Type 30 Type 32 Type 32 Type 33 Type 34 Type 35 Type 35 Type 35 Type 35 Type 35 Type 35 Type 35 Type 37 Type 38 Type 38 Type 38 Type 38 Type 39 Type 39 Type 40A & 40B Type 41 Type 42 Type 42 Type 42 Type 44 Type 45 Type 45 Type 46 Type 47 Type 49 Type 50 -- Eaton 334 B-Line series Pipe Hangers & Supports Reference Data Reference Data Federal Specification To B-Line series & MSS Cross Reference MSS SP-69 MSS SP-58 -----------Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 3 Type 3 Type 4 Type 4 Type 4 Type 6 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 12 Type 12 Type 12 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 18 Type 19 Type 19 Type 19 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 Type 22 B-Line series Part No. B3106 B3109 B3690 B3690C B3690F B22I, B32I, B52I B2503 B2505-B2508 67SS 68SS B3080 S & L 1NFPA B3100 B3100C B3100F B3102 B3104 B3108 B3144 B3146 B3140 B3141 B3142 B3171 B3373 B3373C B3373CT B3373CTC 200 200C 200F 200H 2 & 2F B3170CT B3170CTC B3104 B3104C B3104CT B3202 B3201 B3224 B3224CT B3222 B3200 B3014 B303-B309 B321 B2500 B3031 B3033 B3034 B3050 B3055 B3083 A-A-1192A WW-H-171E Type 1 Type 1 Type 5 Type 5 Type 5 Type 18 Type 18 Type 18 Type 19 Type 19 Type 57 Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 3 Type 3 Type 4 Type 4 Type 4 Type 6 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 1* Type 1* Type 1 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 18 Type 19 Type 19 Type 18 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 Type 22 MSS SP-69 MSS SP-58 B-Line series Part No. Type 23 Type 23 Type 23 Type 23 Type 23 Type 23 Type 24 Type 24 Type 25 Type 25 Type 25 Type 25 Type 26 Type 26 Type 26 Type 28 Type 29 Type 30 Type 32 Type 32 Type 33 Type 34 Type 35 Type 35 Type 35 Type 35 Type 35 Type 35 Type 35 Type 37 Type 38 Type 38 Type 38 Type 38 Type 39 Type 39 Type 40A & 40B Type 41 Type 42 Type 42 Type 42 Type 44 Type 45 Type 45 Type 46 Type 47 Type 49 Type 50 Type 53 Type 54 65 & 65XT 66 68S & 68W B351L B3036L B3037 B3188 B3188C B3198H B3198HCT B3198R B3198RCT B2400 B3180 B3180FL B3291, B3292 B3294, B3296 B3298 B3293, B3295 B3297 B3054 B3065 B3068 B3066 B3067 B3058 B3060 B3060L B3062 B3070 B3891-B3897 B3991 & B3993 B3095 B3090 B3092 B3094 B3097 B3093 B3096 B3160-3165 B3151 B3114 B3122 B3122A B3110 B3117SL B3120 B3119SL B3118SL B3262 B3264 B3045 B3040 * For all finishes excluding plain. A-A-1192A WW-H-171E Type 19 Type 19 Type 19 Type 23 Type 23 Type 23 Type 24 Type 24 Type 12 Type 12 Type 12 Type 12 Type 26 Type 26 Type 26 Type 28 Type 29 Type 30 Type 31 Type 31 Type 32 Type 33 Type 34 Type 34 Type 34 Type 34 Type 34 Type 35 Type 35 Type 36 Type 37 Type 37 Type 37 Type 37 Type 38 Type 38 Type 39A & 39B Type 40 Type 41 Type 41 Type 41 Type 43 Type 44 Type 44 Type 45 Type 46 Type 48 Type 49 Type 25 Type 27 B-Line series Pipe Hangers & Supports 335 Eaton Reference Data Reference Data B-Line series Compliances & Approvals ANSI/MSS SP-69 A-A-1192A Part No. ANSI/MSS SP-58 WW-H-171E UL FM Listed Approved ANSI/MSS SP-69 A-A-1192A Part No. ANSI/MSS SP-58 WW-H-171E UL FM Listed Approved 1NFPA Type 1 Type 1 Yes Yes 2 Type 10 Type 10 Yes Yes 2F Type 10 Type 10 Yes Yes 4A -- -- Yes -- 4B -- -- Yes -- 4L -- -- Yes Yes 4LA -- -- Yes Yes 22 -- -- Yes -- 22L2 -- -- Yes -- 23 -- -- Yes -- 24 -- -- Yes -- 25 -- -- Yes -- 28 -- -- Yes -- 28M -- -- Yes -- 29 -- -- Yes -- 50 -- -- Yes Yes 51 -- -- Yes Yes 56 -- -- Yes Yes 58 -- -- Yes Yes 65 -- -- Yes -- 65XT -- -- Yes Yes 66 -- -- Yes -- 67SS -- -- Yes -- 68S Type 19 & 23 Type 19 & 23 Yes Yes 68SS -- -- Yes -- 68W Type 19 & 23 Type 19 & 23 Yes Yes 69 -- -- Yes -- 69R -- -- Yes -- 75 -- -- Yes -- 78 -- -- Yes -- 109A -- -- Yes -- 109AF -- -- Yes -- 120RWA -- -- Yes -- 130 -- -- Yes Yes 200 Type 10 Type 10 Yes Yes 200C Type 10 Type 10 -- -- 200F Type 10 Type 10 -- -- 200H Type 10 Type 10 Yes -- 200M Type 10 Type 10 Yes Yes 800 -- -- Yes Yes 825 -- -- Yes Yes 825A -- -- Yes -- 828 -- -- Yes Yes 906 -- -- Yes -- 909 -- -- Yes -- 910 -- -- Yes -- 975 -- -- Yes -- 980 -- -- Yes Yes 980H -- -- Yes Yes 1000 -- -- Yes Yes 1001 -- -- Yes Yes 2002 -- -- Yes -- B22I Type 18 -- -- -- B32I Type 18 -- -- -- B52I Type 18 -- -- -- B351L Type 23 Type 23 Yes -- B2400 Type 26 Type 26 Yes -- B2500 Type 18 Type 19 Yes -- B2503 Type 18 -- -- -- B2505-B2508 Type 18 -- Yes -- B3014 Type 18 Type 18 Yes -- B3031 Type 19 Type 19 Yes -- B3033 Type 19 & 23 Type 19 & 23 Yes Yes B3034 Type 19 & 23 Type 19 & 23 Yes Yes B3036L Type 23 Type 23 Yes -- B3037 Type 23 Type 23 Yes -- B3040 Type 27 Type 27 -- -- B3042T -- -- Yes -- B3045 Type 25 Type 53 -- -- B3050 Type 21 Type 21 -- -- B3054 Type 30 Type 30 Yes -- B3055 Type 21 Type 21 -- -- B3058 Type 34 Type 35 -- -- B3060 Type 34 Type 35 -- -- B3060L Type 34 Type 35 -- -- B3062 Type 34 Type 35 -- -- B3065 Type 31 Type 32 -- -- B3066 Type 32 Type 33 -- -- B3067 Type 33 Type 34 -- -- B3068 Type 31 Type 32 -- -- B3070 Type 34 Type 35 -- -- B3080S & L Type 57 -- -- -- B3083 Type 22 Type 22 -- -- B3090 Type 37 Type 38 -- -- B3092 Type 37 Type 38 -- -- B3093 Type 38 Type 39 -- -- B3094 Type 37 Type 38 -- -- B3095 Type 36 Type 37 -- -- Note: Refer to the catalog page for specific sizes that are UL Listed and/or FM Approved. Eaton 336 B-Line series Pipe Hangers & Supports Reference Data Reference Data B-Line series CompIiances & Approvals ANSI/MSS SP-69 A-A-1192A Part No. ANSI/MSS SP-58 WW-H-171E UL FM Listed Approved ANSI/MSS SP-69 A-A-1192A Part No. ANSI/MSS SP-58 WW-H-171E UL FM Listed Approved B3096 Type 38 Type 39 -- -- B3097 Type 37 Type 38 -- -- B3100 Type 1 Type 1 Yes Yes B3100C Type 1 Type 1 -- -- B3100F Type 1 Type 1 -- -- B3102 Type 1 -- -- -- B3104 Type 1* Type 12 Yes -- B3104C Type 1* Type 12 -- -- B3104CT Type 1 Type 12 -- -- B3104CTC Type 1 Type 12 -- -- B3104F Type 1* Type 12 -- -- B3106 Type 1 -- -- -- B3108 Type 1 Type 1 -- -- B3109 Type 1 -- -- -- B3110 Type 43 Type 44 -- -- B3114 Type 41 Type 42 -- -- B3117SL Type 44 Type 45 -- -- B3118SL Type 46 Type 47 -- -- B3119SL Type 45 Type 46 -- -- B3120 Type 44 Type 45 -- -- B3122 Type 41 Type 42 -- -- B3122A Type 41 Type 42 -- -- B3140 Type 4 Type 4 Yes Yes B3141 Type 4 Type 4 -- -- B3142 Type 4 Type 4 -- -- B3144 Type 3 Type 3 -- -- B3146 Type 3 Type 3 -- -- B3151 Type 40 Type 41 -- -- B3160-B3165 Type 39A & 39B Type 40A & 40B -- -- B3170CT Type 10 Type 10 -- -- B3170CTC Type 10 Type 10 -- -- B3180 Type 26 Type 26 -- -- B3180FL Type 26 Type 26 -- -- B3184 -- -- Yes -- B3188 Type 24 Type 24 Yes -- B3188C Type 24 Type 24 -- -- B3198H Type 12 Type 25 -- -- B3198HCT Type 12 Type 25 -- -- B3198R Type 12 Type 25 -- -- B3198RCT Type 12 Type 25 -- -- B3200 Type 17 Type 17 -- -- B3201 Type 14 Type 14 -- -- B3202 Type 13 Type 13 -- -- B3203 -- -- Yes -- B3222 B3223 B3224 B3224CT B3262 B3264 B3291, B3292 B3294, B3296 B3298 B3293, B3295 B3297 B3373 B3373C B3373CT B3373CTC B3373F B3690 B3690C B3690F B3891-B3897 B3991 B3993 B3993A Type 16 -- Type 15 Type 15 Type 48 Type 49 Type 28 Type 29 Type 8 Type 8 Type 8 Type 8 Type 8 Type 5 Type 5 Type 5 Type 35 Type 35 Type 35 Type 35 Type 16 -- Type 15 Type 15 Type 49 Type 50 Type 28 Type 29 Type 8 Type 8 Type 8 Type 8 Type 8 Type 5 Type 5 Type 5 Type 35 Type 35 Type 35 Type 35 Yes -- Yes -- -- -- -- -- -- -- -- -- -- -- -- -- Yes Yes -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Note: Refer to the catalog page for specific sizes that are UL Listed and/or FM Approved. B-Line series Pipe Hangers & Supports 337 Eaton Reference Data Reference Data - Crosses B-Line series TOLCO 1CBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1CBS 1U (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . 1U (Disc.) 4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4A 4B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4B 4L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4L 4LA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4LA 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 22L2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22L2 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 27B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27B 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 28M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28M 29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 65XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65XT 66 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 67S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67S 67SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67SS 68SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68SS 68W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68W 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 69R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69R 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 98B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98B 109A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109A 109AF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109AF 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 120MJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120MJ 120RWA . . . . . . . . . . . . . . . . . . . . . . . . . . . 120RWA 120W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120W 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 200C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200C 200F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200H 200H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200H 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 825 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 825A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825A 828 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828 906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 906 B-Line series TOLCO 907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 907 909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 909 910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 910 975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 975 980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 980H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980H 981 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 981 985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 985 986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 986 990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990 990H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990H 991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 991 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001 2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2002 ATR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ATR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 (Disc.) AWA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 (Disc.) B22I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B32I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B52I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F13 B201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F14 B202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F15 B202-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F16 B202-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F17 B218 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-12 B219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-13 B303 - B309 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B312 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B321 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B351L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 (Disc.) B379 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-14 B386 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4B B479 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-14 B501 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 (Disc.) B655 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 (Disc.) B656 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70R (Disc.) B1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B2400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2STR B2417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B2499 . . . . . . . . . . . . . . . . . . . . . . . . . . . 107F (Disc.) B2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 (Disc.) B2501 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . 109AF B2503 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B2505 - B2508 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 (Disc.) B-Line series TOLCO B3014N . . . . . . . . . . . . . . . . . . . . . . . . 309N (Disc.) B3019 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109A B3031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 68W B3034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68S B3036L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 (Disc.) B3042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 (Disc.) B3042T . . . . . . . . . . . . . . . . . . . . . . . . . . . 61T (Disc.) B3045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 (Disc.) B3050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 (Disc.) B3052 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 B3054 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 (Disc.) B3055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3058 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 B3060L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 (Disc.) B3062 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3064 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3065 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30L (Disc.) B3066 . . . . . . . . . . . . . . . . . . . . . . . . . . . 30M (Disc.) B3067 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30H (Disc.) B3068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 (Disc.) B3069E . . . . . . . . . . . . . . . . . . . . . . . . . 31-O (Disc.) B3069W . . . . . . . . . . . . . . . . . . . . . . . 31-M (Disc.) B3070 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 (Disc.) B3080 L & S . . . . . . . . . . . . . . . . . . . . . 343 (Disc.) B3082 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337 (Disc.) B3083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305 (Disc.) B3083WO . . . . . . . . . . . . . . . . . . . . . . . . 304 (Disc.) B3084 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 (Disc.) B3085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 (Disc.) B3086 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 (Disc.) B3088 . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 (Disc.) B3088S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3088ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3088T . . . . . . . . . . . . . . . . . . . . . . . . . 316T (Disc.) B3089 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 (Disc.) B3090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318 (Disc.) B3092 . . . . . . . . . . . . . . . . . . . . . . . . . . 318A (Disc.) B3093 . . . . . . . . . . . . . . . . . . . . . . . . . . 317A (Disc.) B3094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 (Disc.) B3095 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 (Disc.) B3096 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 (Disc.) B3097 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 (Disc.) (Disc.) = Discontinued Item Eaton 338 B-Line series Pipe Hangers & Supports B-Line series TOLCO B3098 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 (Disc.) B3100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (Disc.) B3100C . . . . . . . . . . . . . . . . . . . . . . . . 1PVC (Disc.) B3100F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1F (Disc.) B3100PS (Disc.) . . . . . . . . . . . . . . . . . . . . . . 1CBS B3102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1CI (Disc.) B3104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1LD (Disc.) B3104C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3104CT . . . . . . . . . . . . . . . . . . . . . . . . . . 81 (Disc.) B3104CTC . . . . . . . . . . . . . . . . . . . 81PVC (Disc.) B3104F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1V (Disc.) B3106V . . . . . . . . . . . . . . . . . . . . . . . . . . 1VT (Disc.) B3108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A (Disc.) B3109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 (Disc.) B3114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322 (Disc.) B3114R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3117R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3117SL . . . . . . . . . . . . . . . . . . . . . . . . . 327 (Disc.) B3118SL . . . . . . . . . . . . . . . . . . . . . . . . . 328 (Disc.) B3119SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 (Disc.) B3122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 (Disc.) B3122A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3124 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3126 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ROL-16 B3132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 (Disc.) B3132W-1 &11/2 . . . . . . . . . . . . . . . . 9X (Disc.) B3134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 (Disc.) B3134W . . . . . . . . . . . . . . . . . . . . . . . . . 14X (Disc.) B3140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (Disc.) B3140C . . . . . . . . . . . . . . . . . . . . . . . . 4PVC (Disc.) B3140F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4F (Disc.) B3141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4CI (Disc.) B3142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4H (Disc.) B3144 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 (Disc.) B3146 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5H (Disc.) B3147A-1/2 thru 4 . . . 32-1/2 thru 4 (Disc.) B3147B 4 thru 24 . . . . . 32-5 thru 34 (Disc.) B3148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 (Disc.) B3149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 (Disc.) B3151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 (Disc.) B3153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 (Disc.) B3154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 (Disc.) B3155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 (Disc.) B3160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 (Disc.) (Disc.) = Discontinued Item B-Line series Pipe Hangers & Supports Reference Data - Crosses B-Line series TOLCO B3161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 (Disc.) B3162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 (Disc.) B3163 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 (Disc.) B3164 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 (Disc.) B3165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 (Disc.) B3170 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B3170CT . . . . . . . . . . . . . . . . . . . . . . . . . 202 (Disc.) B3170CTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3170F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2F B3170NF (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . 200 B3170NF (Disc.) . . . . . . . . . . . . . . 200R (Disc.) B3170NFC (Disc.) . . . . . . . . . . . . . . . . . . . . . 200C B3170NFF (Disc.) . . . . . . . . . . . . . . . . . . . . . . 200F B3171 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3175CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 (Disc.) B3180FL . . . . . . . . . . . . . . . . . . . . . . . . . 20S (Disc.) B3181 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 B3182 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 B3183 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 B3184 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 (Disc.) B3188C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3190 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 (Disc.) B3191 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 (Disc.) B3195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 (Disc.) B3195CT . . . . . . . . . . . . . . . . . . . . . . . . . . 83 (Disc.) B3198H . . . . . . . . . . . . . . . . . . . . . . . . . . 302 (Disc.) B3198HCT . . . . . . . . . . . . . . . . . . . . 301CT (Disc.) B3199R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 B3199RCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 (Disc.) B3201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 (Disc.) B3202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 (Disc.) B3203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 (Disc.) B3205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 (Disc.) B3210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 (Disc.) B3210X . . . . . . . . . . . . . . . . . . . . . . . . . 102L (Disc.) B3211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 (Disc.) B3211X . . . . . . . . . . . . . . . . . . . . . . . . . 101L (Disc.) B3212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 (Disc.) B3213 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 (Disc.) B3214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 (Disc.) B3220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 (Disc.) B3222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 (Disc.) B3223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B-Line series TOLCO B3224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 (Disc.) B3227 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 (Disc.) B3248 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 (Disc.) B3256 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 (Disc.) B3257 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406 (Disc.) B3262 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506 (Disc.) B3264 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 (Disc.) B3281 - B3287 . . . . . . . . . . . . . . . . . . 420 (Disc.) B3281 - B3287 . . . . . . . . . . . . . . . . . . 421 (Disc.) B3281 - B3287 . . . . . . . . . . . . . . . . . . 422 (Disc.) B3281 - B3287 . . . . . . . . . . . . . . . . . 422C (Disc.) B3291 - B3298 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3362 - B3365 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3367 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 B3373 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 (Disc.) B3373C . . . . . . . . . . . . . . . . . . . . . . . . 6PVC (Disc.) B3373CT . . . . . . . . . . . . . . . . . . . . . . . . . . 82 (Disc.) B3373CTC . . . . . . . . . . . . . . . . . . . 82PVC (Disc.) B3373F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6F (Disc.) B3380 - B3387 . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3690 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (Disc.) B3690C . . . . . . . . . . . . . . . . . . . . . . . . 3PVC (Disc.) B3690F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3F (Disc.) B3891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 (Disc.) B3891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 (Disc.) B3891 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 (Disc.) B3892 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430 (Disc.) B3894 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3895 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A B3993-10 . . . . . . . . . . . . . . . . . . . . . . . . 428 (Disc.) B3393-10/B3393-10B . . . . . . . . . . 431 (Disc.) DS15x2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 (Disc.) DURA-BLOKTM . . . . . . . . . . . Pipe Pier (Disc.) FFW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 (Disc.) FW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 (Disc.) HHN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 (Disc.) HN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 (Disc.) ISO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A KwikClipsTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A LW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 (Disc.) N2500 . . . . . . . . . . . . . . . . . . . . . . . . . . 310N (Disc.) Snap `N ShieldsTM Clevis Hangers . . N/A Snap `N ShieldsTM . . . . . . . . . . . . . . . . . . . . . N/A Toggle Bolts . . . . . . . . . . . . . . . . . . . . 123 (Disc.) 339 Eaton Reference Data Reference Data Reference Data - Crosses TOLCO B-Line series 1 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 1A (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3108 1CBS . . . . . . . . . . . . . . . . . . . . . . B3100PS (Disc.) 1CI (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3102 1F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100F 1LD (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 1NFPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1NFPA 1PVC (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3100C 1U (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . 1U (Disc.) 1V (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3106 1VT (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3106V 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Disc.) 2F . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3170F (Disc.) 2FWON (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . N/A 2WON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 3 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3690 3F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3690F 3PVC (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3690C 4 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4A 4B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B386 (Disc.) 4CI (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3141 4F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140F 4H (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3142 4L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4L 4LA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4LA 4PVC (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3140C 5 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 5H (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3146 6 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 6F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373F 6PVC (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3373C 7 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3148 8 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3149 9 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 9X (Disc.) . . . . . . . . . . . . . . . . B3132W-1 &11/2 14 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3134 14X (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3134W 20 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 20S (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3180FL 21 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3181 (Disc.) 22L2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22L2 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3182 (Disc.) 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3183 (Disc.) 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 27B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27B 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 28M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28M 29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 30 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3068 Eaton TOLCO B-Line series 30H (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . B3067 30L (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3065 30M (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . B3066 31-M (Disc.) . . . . . . . . . . . . . . . . . . . . . . . B3069W 31-O (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3069E 32-1/2 thru 4 (Disc.) . . . B3147A-1/2 thru 4 32-5 thru 34 (Disc.) . . . . B3147B 5 thru 24 33 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3084 34 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3086 35 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3085 40 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3190 41 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3191 42 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3061 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 52 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3070 56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 60 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 61 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3042 61T (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3042T 62 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3050 64 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B351L 65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 65XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65XT 66 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 67SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67SS 68S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3034 68SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68SS 68W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3033 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Disc.) 69R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69R 70 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B655 70R (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B656 70S (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B655 71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3220 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 & B3199R 81 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3104CT 81PVC (Disc.) . . . . . . . . . . . . . . . . . . . B3104CTC 82 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3373CT 82PVC (Disc.) . . . . . . . . . . . . . . . . . . . B3373CTC 83 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3195CT 84 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3195 98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 98B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98B 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATR 100 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATR 101 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3211 101L (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3211X 102 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Disc.) = Discontinued Item 340 TOLCO B-Line series 102L (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3210X 103 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3205 104 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3212 105 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3213 106 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3214 107F (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B2499 109A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3019 109AF . . . . . . . . . . . . . . . . . . . . . . . . . B2501 (Disc.) 110 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3188 111 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B501 113 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HN 114 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HHN 115 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW 116 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3234 117 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LW 118 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3248 119 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FFW 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 120MJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120MJ 120RWA . . . . . . . . . . . . . . . . . . . . . . . . . . . 120RWA 120W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120W 122 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 123 (Disc.) . . . . . . . . . . . . . . . . . . . . Toggle Bolts 124 (Disc.) . . . . . . . . . . . . . . Toggle Bolt Head 125 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . DS15x2 126 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3052 (Disc.) 150 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 200 . . . . . . . . . . . . . . . . . . . . . . . . B3170NF (Disc.) 200C . . . . . . . . . . . . . . . . . . . . . B3170NFC (Disc.) 200F . . . . . . . . . . . . . . . . . . . . . . B3170NFF (Disc.) 200H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200H 200R (Disc.) . . . . . . . . . . . . . . . . B3170NF (Disc.) 200WON (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . N/A 202 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3170CT 203 (Disc.) . . . . . . . . . . . . . . B3170NFC (Disc.) 207 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 209 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AWA 219 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3153 219 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3155 220 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3151 220 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3154 260 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3160 261 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3161 262 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3162 263 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3163 264 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3164 265 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3165 301CT (Disc.) . . . . . . . . . . . . . . . . . . . B3198HCT 302 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3198H 304 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . B3083WO B-Line series Pipe Hangers & Supports Reference Data TOLCO B-Line series 305 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3083 306 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3224 307 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3222 309 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3014 309N (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3014N 310 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2500 310N (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . N2500 311 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3097 312 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3096 313 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3098 314 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3094 315 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 316 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3088 316T (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3088T 317 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3095 317A (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3093 318 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3090 318A (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . B3092 319 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3089 322 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3114 323 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 324 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3110 325 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3120 326 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3122 327 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3117SL 328 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . B3118SL 329 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3054 330 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3200 331 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3202 332 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3201 333 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3203 335 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3045 336 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3040 337 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3082 343 (Disc.) . . . . . . . . . . . . . . . . . . . . B3080 L & S 405 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3256 406 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3257 420 (Disc.) . . . . . . . . . . . . . . . . . . B3281 - B3287 421 (Disc.) . . . . . . . . . . . . . . . . . . B3281 - B3287 422 (Disc.) . . . . . . . . . . . . . . . . . . B3281 - B3287 422C (Disc.) . . . . . . . . . . . . . . . . B3281 - B3287 425 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891 426 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891 426A (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 426AC (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 426AG (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 426C (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 426G (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 427 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 428 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . B3993-10 Reference Data - Crosses TOLCO B-Line series 429 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891 430 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3892 431 (Disc.) . . . . . . . . . . B3393-10/B3393-10B 432 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 433 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 434 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 500 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3264 506 (Disc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3262 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 825 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825 825A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825A 828 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828 906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 906 907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 907 909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 909 910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 910 975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 975 980 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 980 981 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 981 985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 985 986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 986 990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 990 991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 991 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001 2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2002 Pipe Pier (Disc.) . . . . . . . . . . . . . . DURA-BLOK TOLCO B-Line series B-Line series Pipe Hangers & Supports 341 Eaton Reference Data Reference Data - Crosses Anvil/Grinnell� B-Line series/TOLCO 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3040 (Fig. 336) 40 . . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3084 (Fig. 33) 49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3086 (Fig. 34) 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B422 52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3085 (Fig. 35) 54 . . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S (Fig. 343 LONG & FG 343 SHORT) 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) 62 . . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 63 . . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory CT65 . . . . . . . . . . . . . . . . . . . . . B3104CT (Fig. 81) 66 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3083 (Fig.305)/ B3083WO (Fig. 304) 67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3690 (Fig. 3) 68 . . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 69 . . . . . . . . . . . . . . . . . . . . . . . Fig. 200 (B3170NF) 69C . . . . . . . . . . . . . . . . . . Fig. 200C (B3170NFC) 89, 87 . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 92 . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 65/Fig. 65XT 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 66 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8) 103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) 110R . . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) 112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 910 114 . . . . . . . . . . . . . . . . . . . . . . . . . B3224 (Fig. 306) CT121 . . . . . . . . . . . . . . . . . . . . B3373CT (Fig. 82) CT138R . . . . . . . . . . . . B3198HCT (Fig. 301CT) 128R . . . . . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78) 133-134 . . . . . . . . . . . . . . . . . . . . . B3050 (Fig. 62) 135 . . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) & B3220 (Fig. 71) 136R . . . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 137 . . . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 138R . . . . . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) 140 . . . . . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 142 . . . . . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105) 146 . . . . . . . . . . . . . . . . ATR (Fig. 99 & Fig. 100) 157 . . . . . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333) 160 . . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) 161 . . . . . . . . . . . . . . . . . . . . . . . . . B3161 (Fig. 261) 162 . . . . . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262) 163 . . . . . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263) 164 . . . . . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264) Anvil/Grinnell� B-Line series/TOLCO 165 . . . . . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) 167 . . . . . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 168 . . . . . . . . . . . . . . . . . . . . . . . . . B3153 (Fig. 219) 171 . . . . . . . . . . . . . . . . . . . . . . . . . B3114 (Fig. 322) 175 . . . . . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) 177 . . . . . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 178 . . . . . . . . . . . . . . . . . . . . . . . . . B3264 (Fig. 500) 181 . . . . . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 191 . . . . . . . . . . . . . . . . . . . . . . . . . B3098 (Fig. 313) 192 . . . . . . . . . . . . . . . . . . . . . . . . . B3096 (Fig. 312) 194 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30) 195 . . . . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) 199 . . . . . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) 202 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3060 (Fig. 50) 206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 51 212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) 212FP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 4A 216 . . . . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H) 217 . . . . . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335) 227 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3042 (Fig. 61) 230 . . . . . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) 247 . . . . . . . . . . . . . . . . . . . . . . . . . B3262 (Fig. 506) 248 . . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) 248X . . . . . . . . . . . . . . . . . . . . B3210X (Fig. 102L) 255 . . . . . . . . . . . . . . . B3281 - B3287 (Fig. 422) 256 . . . . . . . . . . . . . . . B3281 - B3287 (Fig. 421) 257 . . . . . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426) 259 . . . . . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) 260 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) 261 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 262 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 264 . . . . . . . . . . . . . . . . . . . . . . . B3093 (Fig. 317A) 271 . . . . . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327) 274 . . . . . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328) 278 . . . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 278X . . . . . . . . . . . . . . . . . . . . B3211X (Fig. 101L) 280 . . . . . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426) 282 . . . . . . . . . . . . . . . . . . . . . . . B3014 (FG 309) & B3014N (Fig. 309N) 285N . . . . . . . . . . . . . . . . . . . . . N2500 (Fig. 310N) 290 . . . . . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330) 295 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) 299 . . . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3108(Fig. 1A) 436 . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 437 . . . . . . . . . . . . . . . . . . . . . . . . . Consult Factory Anvil/Grinnell� B-Line series/TOLCO 438-1 . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 438-2 . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 438-3 . . . . . . . . . . . . . . . . . . . . . . . Consult Factory 590 . . . . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) 594 . . . . . . . . . . . . . . . . . . . . . . B3134W (Fig. 14X) 595 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14) 599 . . . . . . . . . . . . . B3132W-1 & 11/2 (Fig. 9X) 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) 218, 229 . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329) Eaton Mark shown is the property of its respective owner. Chart provides a cross reference to help determine equivalent products. 342 B-Line series Pipe Hangers & Supports Reference Data Erico� B-Line series/TOLCO 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) 10H . . . . . . . . . . . . . . . . . . . . . . . . . . HHN (Fig. 114) 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FFW (Fig. 119) 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117) 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) 25R . . . . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 25S . . . . . . . . . . . . . . . . . . . . . . . . B655S (Fig. 70S) 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333) 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) 35 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330) 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) 40W . . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 43 . . . . . . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) 46 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3214 (Fig. 106) 47 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) 50 . . . . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 51 . . . . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2) 125 . . . . . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 200 150 . . . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) 255C . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 282 . . . . . . . . . . . . . . . . . . . . . . . . . B3014 (Fig. 309) 282N . . . . . . . . . . . . . . . . . . . B3014N (Fig. 309N) 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) 310 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 66 319 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3061 (Fig. 42) 320L . . . . . . . . . . . . . . . . . . . B3083WO (Fig. 304) 320W . . . . . . . . . . . . . . . . . . . . . . . B3083 (Fig. 305) 321 . . . . . . . . . . . . . . . . . . . . . . . . . B3082 (Fig. 337) 325 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3060 (Fig. 50) 326 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3070 (Fig. 52) 335A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 975 335AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 910 340 . . . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) 348 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30) 351 . . . . . . . . . . . . . . . . . . . . . . . . . B3065 (Fig. 30L) 352 . . . . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) 353 . . . . . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) 355 . . . . . . . . . . . . . . . . . . . . . . . . . B2500 (Fig. 310) 355N . . . . . . . . . . . . . . . . . . . . . N2500 (Fig. 310N) 356 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 130 359 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3042 (Fig. 61) Reference Data - Crosses Erico� B-Line series/TOLCO 360 . . . . . . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329) 361 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3050 (Fig. 62) 363 . . . . . . . . . . . . . . . . . . . . . . . . . B3040 (Fig. 336) 367 . . . . . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335) 370A . . . . . . . . . . . . . . . . . . . . . Fig. 109A (B3019) 371 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S (Fig. 343 LONG & Fig. 343 SHORT) 373 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3084 (Fig. 33) 374 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3086 (Fig. 34) 374A . . . . . . . . . . . . . . . . . . . . . . . . . B3085 (Fig. 35) 400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) 400FL . . . . . . . . . . . . . . . . . . . . . . . B3100F (Fig. 1F) 402 . . . . . . . . . . . . . . . . . . . . . . . B3104CT (Fig. 81) 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) 410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A) 418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3690 (Fig. 3) 418FL . . . . . . . . . . . . . . . . . . . . . . . B3690F (Fig. 3F) 450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) 451 . . . . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H) 452 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) 455 . . . . . . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) 456 . . . . . . . . . . . . . . . . . B3198HCT (Fig. 301CT) 457 . . . . . . . . . . . . . . . . . . . . . . . . . B3190 (FFig. 40) 458 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3191 (Fig. 41) 470 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 511 . . . . . . . . . . . . . . . . . . . . . . B3373CT (FFig. 82) 516 . . . . . . . . . . . . . B3132W-1 &11/2 (FFig. 9X) 517 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) 605 . . . . . . . . . . . . . . . . . . . . . . . . B3114 (FFig. 322) 610 . . . . . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 615 . . . . . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) 617 . . . . . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327) 619 . . . . . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328) 620 . . . . . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 625 . . . . . . . . . . . . . . . . . . . . . . . . . B3264 (Fig. 500) 630 . . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) 631 . . . . . . . . . . . . . . . . . . . . . . . . . B3161 (Fig. 261) 632 . . . . . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262) 633 . . . . . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263) 634 . . . . . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264) 635 . . . . . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) 640 . . . . . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426) 640-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891 Erico� B-Line series/TOLCO 640-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3892 640-3 . . . . . . . . . . . . . . . . . B3393-10/B3393-10B 651 . . . . . . . . . . . . . . . B3281 - B3287 (Fig. 421) 651 . . . . . . . . . . . . . . . B3281 - B3287 (Fig. 421) 700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) 705 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8) 720 . . . . . . . . . . . . . . . . . . . . . . . . . B3095 (Fig. 317) 721 . . . . . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) 724 . . . . . . . . . . . . . . . . . . . . . . . . . B3098 (Fig. 313) 420 . . . . . . . . . . . . . . . . . . . . . B3100C (Fig. 1PVC) 520 . . . . . . . . . . . . . . . . . . . . . B3373C (Fig. 6PVC) 107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 22 108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 23 109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 24 B-Line series Pipe Hangers & Supports Mark shown is the property of its respective owner. Chart provides a cross reference to help determine equivalent products. 343 Eaton Reference Data Reference Data - Crosses PHD� B-Line series/TOLCO 10 . . . . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 20 . . . . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333) 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) 35 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330) 38 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105) 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3224 (Fig. 306) 47W . . . . . . . . . . . . . . . . . . . . . . . . . AWA (Fig. 209) 48 . . . . . . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) 55 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3212 (Fig. 104) 70 . . . . . . . . . . . . . . . . . . . . . . . . . B2499 (Fig. 107F) 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 120 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 95, 110 . . . . . . . . . . . . . . . . . . . . . . B501 (Fig. 111) 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) 104 . . . . . . . . . . . . . . . . . . . . . . . . . B655S (Fig. 70S) 105 . . . . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) 110H . . . . . . . . . . . . . . . . . . . . . . . . . HHN (Fig. 114) 130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) 134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117) 135 . . . . . . . . . . . . . . . . . . . . . . . . . B3234 (Fig. 116) 136 . . . . . . . . . . . . . . . . . . . . . . . . . . . FFW (Fig. 119) 151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2) 160 . . . . . . . . . . . . . . . . . . . . . . . . . B3153 (Fig. 219) 170 . . . . . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) 350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 65 359 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 360 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 420 . . . . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) 430 . . . . . . . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A) 440 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) 450F . . . . . . . . . . . . . . . . . . . . . . . . B3100F (Fig. 1F) 450V . . . . . . . . . . . . . . . . . . . . . . . . . B3106 (Fig. 1V) 453 . . . . . . . . . . . . . . . . . . . . . B3100C (Fig. 1PVC) 460 . . . . . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) 470 . . . . . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 480 . . . . . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 486 . . . . . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327) 487 . . . . . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328) PHD� B-Line series/TOLCO 490 . . . . . . . . . . . . . . . . . . . . . . . . . B3114 (Fig. 322) 508 . . . . . . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) 512H . . . . . . . . . . . . . . . B3198HCT (Fig. 301CT) 520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) 522 . . . . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H) 525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) 535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) 545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8) 550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 552 . . . . . . . . . . . . . . . . . . . . . . . B3373CT (Fig. 82) 553 . . . . . . . . . . . . . . . . . . . . . B3373C (Fig. 6PVC) 554 . . . . . . . . . . . . . . . . B3373CTC (Fig. 82PVC) 580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) 585 . . . . . . . . . . . . . . B3132W-1 &11/2 (Fig. 9X) 590 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14) 595 . . . . . . . . . . . . . . . . . . . . . . B3134W (Fig. 14X) 610, 620 . . . . . . . . . . . . . . . . . . . . . B3050 (Fig. 62) 630 . . . . . . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329) 635 . . . . . . . . . . . . . . . . . . . . . . . . . B3040 (Fig. 336) 651 . . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) 653 . . . . . . . . . . . . . . . . . . . . . . . . . B3161 (Fig. 261) 654 . . . . . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262) 655 . . . . . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263) 656 . . . . . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264) 658 . . . . . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) 670-678 . . . . . . . . . . B3281 - B3287 (Fig. 421) 690 . . . . . . . . . . . . . . . . . . . . . . . . . B3891 (Fig. 426) 690-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3891 690-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3892 690-3 . . . . . . . . . . . . . . . . . B3393-10/B3393-10B 810 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3191 (Fig. 41) 820 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3190 (Fig. 40) 825 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 830 . . . . . . . . . . . . . . . . . . . . . . B3180FL (Fig. 20S) 840 . . . . . . . . . . . . . . . . . . . . . . . B3147A-1/2 thru 4 (Fig. 32-1/2 thru 4) 840 . . . . . . . . . . . . . . . . . . . . . . . . B3147B 4 thru 24 (Fig. 32-5 thru 34) 850 . . . . . . . . . . . . . . . . . . . . . . . . . B3065 (Fig. 30L) 855 . . . . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) 860 . . . . . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) 871 . . . . . . . . . . . . . . . . . . . . . . B3088T (Fig. 316T) 875 . . . . . . . . . . . . . . . . . . . . . . . B3093 (Fig. 317A) 876 . . . . . . . . . . . . . . . . . . . . . . . B3092 (Fig. 318A) 880 . . . . . . . . . . . . . . . . . . . . . . . . . B3095 (Fig. 317) 882 . . . . . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) PHD� B-Line series/TOLCO 885 . . . . . . . . . . . . . . . . . . . . . . . . Fig 109A (B3019) 890 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 975 900 . . . . . . . . . . . . . . . . . . . . . . . . . B3083 (Fig. 305) 900-1 . . . . . . . . . . . . . . . . . . B3083WO (Fig. 304) 903 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3085 (Fig. 35) 904 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3086 (Fig. 34) 910 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3061 (Fig. 42) 925 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3070 (Fig. 52) 930 . . . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) 936 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S (Fig. 343 LONG & Fig. 343 SHORT) 940 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78) 950 . . . . . . . . . . . . . . . . . . . . . . . . . B3014 (Fig. 309) 950N . . . . . . . . . . . . . . . . . . . B3014N (Fig. 309N) 960 . . . . . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) 970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3690 (Fig. 3) 970F . . . . . . . . . . . . . . . . . . . . . . . . B3690F (Fig. 3F) 980 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3195 (Fig. 84) 982 . . . . . . . . . . . . . . . . . . . . . . . B3195CT (Fig. 83) Eaton Mark shown is the property of its respective owner. Chart provides a cross reference to help determine equivalent products. 344 B-Line series Pipe Hangers & Supports Reference Data Super Strut� B-Line series/TOLCO 164 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 452 . . . . . . . . . . . . . . . . . . . . . . . . . B2500 (Fig. 310) 540 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3060 (Fig. 50) 542 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3070 (Fig. 52) AB102 . . . . . . . . . . . . . . . . . . . N2500 (Fig. 310N) AB201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 51 C475 . . . . . . . . . . . . . . . . . . . . . . Fig 109A (B3019) C704 . . . . . . . . . . . . . . . . . . . . . . . . . . B3191(Fig. 41) C704A . . . . . . . . . . . . . . . . . . . . . . . B3190 (Fig. 40) C710 . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) C710F . . . . . . . . . . . . . . . . . . . . . . B3100F (Fig. 1F) C710P . . . . . . . . . . . . . . . . . . B3100C (Fig. 1PVC) C720P . . . . . . . . . . . . . . . . . . B3373C (Fig. 6PVC) C724 . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) C725 . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) C726 . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) C727 . . . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2) C729-2 . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) C730C . . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327) C730D . . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328) C736 . . . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30) C739H . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) C739M . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) C747 . . . . . . . . . . . . . . . . . . . . . . . . B3082 (Fig. 337) C755T-C757T . . . . . . . . . . . . . . . B3050 (Fig. 62) C769 . . . . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335) C775L . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) C777 . . . . . . . . . . . . . . . . . . . . . . . Fig. 65/Fig. 65XT C778 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 66 C711 . . . . . . . . . . . . . . . . . . . . . . . . . . B3690 (Fig. 3) C711F . . . . . . . . . . . . . . . . . . . . . . B3690F (Fig. 3F) B3690C (FG 3PVC) C716 . . . . . . . . . . . . . . . . . . . . . . B3195CT (Fig. 83) C720 . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) C720L . . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) C780W/HW . . . . . . . . . . . . . . . B3083 (Fig. 305) C780W/O . . . . . . . . . . . . . B3083WO (Fig. 304) C781 . . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) C785 . . . . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) C786 . . . . . . . . . . . . . . . . . . . . . . B3093 (Fig. 317A) C789 . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) C789A . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) C789B . . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262) C789C . . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263) C789D . . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264) C789E . . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) Reference Data - Crosses Super Strut� B-Line series/TOLCO C790 . . . . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) CF729A . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) CI710 . . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) CL710 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 CT720 . . . . . . . . . . . . . . . . . . . . B3373CT (Fig. 82) CTL710 . . . . . . . . . . . . . . . . . . . B3104CT (Fig. 81) CX710 . . . . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A) E120 . . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) E120A . . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330) E145 . . . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) E147 . . . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) EF147 . . . . . . . . . . . . . . . . . . . . . . . . FFW (Fig. 119) E148 . . . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117) E151 . . . . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105) E151D . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) E156 . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) E157 . . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) F111 . . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) F112 . . . . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) H104 . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) H115 . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) H119 . . . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) H119R . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) HL115 . . . . . . . . . . . . . . . . . . . . . . . B501 (Fig. 111) M129 . . . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333) M718 . . . . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) M724R . . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78) M732 . . . . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329) M778 . . . . . . . . . . . . . . . . . . . . . . B3034 (Fig. 68S) & B3033 (Fig. 68W) PG794 . . . . . . . . . . . . . B3281 - B3287 (Fig. 21) RC729 . . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) RCS . . . . . . . . . . . . . . . . . . . . . . B3147A-1/2 thru 4 (Fig. 32-1/2 thru 4) RCS . . . . . . . . . . . . . . . . . . . . . . . B3147B 4 thru 24 (Fig. 32-5 thru 34) U568 . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) W724 . . . . . . . . . . . . . . . . . . . . . . B3132W-1 &11/2 (Fig. 9X) Super Strut� B-Line series/TOLCO B-Line series Pipe Hangers & Supports Mark shown is the property of its respective owner. Chart provides a cross reference to help determine equivalent products. 345 Eaton Reference Data Reference Data - Crosses Carpenter & Paterson� B-Line series/TOLCO 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3042 (Fig. 61) 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3040 (Fig. 336) 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3050 (Fig. 62) 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105) 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3212 (Fig. 104) 33 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) 38 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3224 (Fig. 306) 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) 44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 120 53 . . . . . . . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328) 59 . . . . . . . . . . . . . . . . . . Toggle Bolts (Fig. 123) 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30) 84 . . . . . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) 85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3199 (Fig. 78) 92 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335) 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 94 . . . . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) 102 . . . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) 103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) 109 . . . . . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 114 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) 125 . . . . . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) 126 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 132 . . . . . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) 133 . . . . . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 137 . . . . . . . . . . . . . . . . . . . . . . . . . B3096 (Fig. 312) 139 . . . . . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) 140 . . . . . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 152 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3061 (Fig. 42) 158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) 165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) 166 . . . . . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) 175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) 176 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117) 179 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) 192 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 65 200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S (Fig. 343 LONG & Fig. 343 SHORT) 222 . . . . . . . . . . . . . . . . . . . . . . . . . . . B501 (Fig. 111) 227 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3190 (Fig. 40) Carpenter & Paterson� B-Line series/TOLCO 258 . . . . . . . . . . . . . . B3132W-1 &11/2 (Fig. 9X) 260 . . . . . . . . . . . . . . . . . . . . . . B3134W (Fig. 14X) 267 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8) 276 . . . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) 283 . . . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 293 . . . . . . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329) 298 . . . . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H) 303 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3060 (Fig. 50) 304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) 306 . . . . . . . . . . . . . . . . . . . . . . B3210X (Fig. 102L) 341 . . . . . . . . . . . . . . . . . . . . . . B3211X (Fig. 101L) 351 . . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) 352 . . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) 353 . . . . . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262) 354 . . . . . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263) 355 . . . . . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264) 356 . . . . . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) 478 . . . . . . . . . . . . . . . . . . . . . . . . . B3264 (Fig. 500) 706 . . . . . . . . . . . . . . . . . . . . . . . . . B3234 (Fig. 116) 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2) 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 200 100C.I. . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) 100CT . . . . . . . . . . . . . . . . . . . . B3104CT (Fig. 81) 100EL . . . . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A) 100PVC . . . . . . . . . . . . . . . . B3100C (Fig. 1PVC) 100PVC . . . . . . . . . . . B3104CTC (Fig. 81PVC) 123R . . . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 123W . . . . . . . . . . . . . . . . . . . . . . . . B3220 (Fig. 71) 126CT . . . . . . . . . . . . . . . . . . . . B3373CT (Fig. 82) 126PVC . . . . . . . . . . . . . . . . B3373C (Fig. 6PVC) 158DB . . . . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14) 200VT . . . . . . . . . . . . . . . . . . . . . . . B3106 (Fig. 1V) 227S . . . . . . . . . . . . . . . . . . . . . . . . . B3191 (Fig. 41) 265P . . . . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 650-266-75 . . . . . . . . . B3014N (Fig. 309N) 81CT . . . . . . . . . . . B3198HCT (Fig. 301CT) Carpenter & Paterson� B-Line series/TOLCO Eaton Mark shown is the property of its respective owner. Chart provides a cross reference to help determine equivalent products. 346 B-Line series Pipe Hangers & Supports Reference Data Empire� B-Line series/TOLCO 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3100 (Fig. 1) 11CI . . . . . . . . . . . . . . . . . . . . . . . . B3102 (Fig. 1CI) 11V . . . . . . . . . . . . . . . . . . . . . . . . . . B3106 (Fig. 1V) 11X . . . . . . . . . . . . . . . . . . . . . . . . . . B3108 (Fig. 1A) 21L . . . . . . . . . . . . . . . . . . . . . . . . . . . B351L (Fig. 64) 22R . . . . . . . . . . . . . . . . . . . . . . . . . . B3367 (Fig. 69) 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3210 (Fig. 102) 26W . . . . . . . . . . . . . . . . . . . . . . . . B3211 (Fig. 101) 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3170 (Fig. 2) 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 200 35 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3262 (Fig. 506) 41H . . . . . . . . . . . . . . . . . . . . . . . B3198H (Fig. 302) 41HCT . . . . . . . . . . . . . B3198HCT (Fig. 301CT) 47 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3222 (Fig. 307) 49PC . . . . . . . . . . . . . . . . . . . B3373C (Fig. 6PVC) 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3373 (Fig. 6) 50CT . . . . . . . . . . . . . . . . . . . . . B3373CT (Fig. 82) 50CTI or 49PC . . . . . . . . . . . . . . . . . . . B3373CTC (Fig. 82PVC) 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B655 (Fig. 70) 51R . . . . . . . . . . . . . . . . . . . . . . . . . . B656 (Fig. 70R) 52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW (Fig. 115) 52F . . . . . . . . . . . . . . . . . . . . . . . . . . . FFW (Fig. 119) 52L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LW (Fig. 117) 53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3061 (Fig. 42) 54 . . . . . . . . . . . . . . . . . . . . . . . ATR (Fig. 99 & 100) 55 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3213 (Fig. 105) 56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HN (Fig. 113) 57 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3205 (Fig. 103) 59 . . . . . . . . . . . . . . . . . . . . . . . . . DS15x2 (Fig. 125) 61 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 66 62 . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 65/Fig. 65XT 67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3086 (Fig. 34) 68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3085 (Fig. 35) 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3080 L & S (Fig. 343 LONG & Fig. 343 SHORT) 72 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3234 (Fig. 116) 75 . . . . . . . . . . . . . . . . . . . . . . . . B3134W (Fig. 14X) 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3248 (Fig. 118) 77 . . . . . . . . . . . . . . . . . . . . . . . . . B2499 (Fig. 107F) 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . AWA (Fig. 209) 81N . . . . . . . . . . . . . . . . . . . . B3014N (Fig. 309N) 83 . . . . . . . . . . . . . . . . . . Toggle Bolts (Fig. 123) 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3148 (Fig. 7) 97 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3149 (Fig. 8) Reference Data - Crosses Empire� B-Line series/TOLCO 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3104 110CT . . . . . . . . . . . . . . . . . . . . B3104CT (Fig. 81) 110PC . . . . . . . . . . . . . . . . . . B3100C (Fig. 1PVC) 110PC . . . . . . . . . . . . . B3104CTC (Fig. 81PVC) 114 . . . . . . . . . . . . . . . . . . . . . . . . . B3224 (Fig. 306) 131 . . . . . . . . . . . . . . . . . . . . . . . . . B3200 (Fig. 330) 137 . . . . . . . . . . . . . . . . . . . . . . . . . B3188 (Fig. 110) 145 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3191 (Fig. 41) 146 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3190 (Fig. 40) 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig. 130 155 . . . . . . . . . . . . . . . . . . . . . . . . . B3040 (Fig. 336) 156 . . . . . . . . . . . . . . . . . . . . . . . . . B3045 (Fig. 335) 157 . . . . . . . . . . . . . . . . . . . . . . . . . B3203 (Fig. 333) 158 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3042 (Fig. 61) 167 . . . . . . . . . . . . . . . . . . . . . . . . . B3151 (Fig. 220) 180 . . . . . . . . . . . . . . . . . . . . . . B3180FL (Fig. 20S) 189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3144 (Fig. 5) 202 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3060 (Fig. 50) 212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3140 (Fig. 4) 216 . . . . . . . . . . . . . . . . . . . . . . . . . . B3142 (Fig. 4H) 218 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3050 (Fig. 62) 229 . . . . . . . . . . . . . . . . . . . . . . . . . B3054 (Fig. 329) 231 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3180 (Fig. 20) 256 . . . . . . . . . . . . . . . B3281 - B3287 (Fig. 421) 272 . . . . . . . . . . . . . . . . . . . . . . . . . B3110 (Fig. 324) 273 . . . . . . . . . . . . . . . . . . . . . . . . . B3122 (Fig. 326) 275 . . . . . . . . . . . . . . . . . . . . . . . . . B3120 (Fig. 325) 277 . . . . . . . . . . . . . . . . . . . . . . . . . B3114 (Fig. 322) 320 . . . . . . . . . . . . . . . . . . . . . . . . . B3202 (Fig. 331) 420 . . . . . . . . . . . . . . . . . . . . . . . . . B3095 (Fig. 317) 422 . . . . . . . . . . . . . . . . . . . . . . . . . B3096 (Fig. 312) 426 . . . . . . . . . . . . . . . . . . . . . . . B3093 (Fig. 317A) 427 . . . . . . . . . . . . . . . . . . . . . . . B3092 (Fig. 318A) 427 . . . . . . . . . . . . . . . . . . . . . . . . . B3090 (Fig. 318) 595 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3134 (Fig. 14) 599 . . . . . . . . . . . . . . B3132W-1 &11/2 (Fig. 9X) 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3132 (Fig. 9) 801 . . . . . . . . . . . . . . . . . . . . . . . . B3066 (Fig. 30M) 802 . . . . . . . . . . . . . . . . . . . . . . . . . B3067 (Fig. 30H) 820 . . . . . . . . . . . . . . . . . . . . . . . . . . . B3068 (Fig. 30) 909 . . . . . . . . . . . . . . . . . . . . . . . . . B3201 (Fig. 332) 279S . . . . . . . . . . . . . . . . . . . . B3117SL (Fig. 327) 280S . . . . . . . . . . . . . . . . . . . . B3118SL (Fig. 328) 425 or 427 . . . . . . . . . . . . . . . . . B3098 (Fig. 313) 1900 . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) 1901 . . . . . . . . . . . . . . . . . . . . . . . . B3160 (Fig. 260) Empire� B-Line series/TOLCO 1902 . . . . . . . . . . . . . . . . . . . . . . . . B3162 (Fig. 262) 1903 . . . . . . . . . . . . . . . . . . . . . . . . B3163 (Fig. 263) 1904 . . . . . . . . . . . . . . . . . . . . . . . . B3164 (Fig. 264) 1905 . . . . . . . . . . . . . . . . . . . . . . . . B3165 (Fig. 265) 4000 Series . . . . . . . . . . . . . . . B3891 (Fig. 426) B-Line series Pipe Hangers & Supports Mark shown is the property of its respective owner. Chart provides a cross reference to help determine equivalent products. 347 Eaton Index Index Part No. Page 1CBS ................................................................................ 49 1NFPA ..................................................................... 50-51 4A ........................................................................... 77, 173 4B ........................................................................... 85, 174 4L .......................................................................... 174-175 4LA ....................................................................... 175-176 22 ........................................................................................ 96 22L2 .................................................................................. 97 23 ........................................................................................ 98 24 ........................................................................................ 99 25 ..................................................................................... 100 27B ................................................................................. 101 28 ..................................................................................... 102 28M ................................................................................ 103 29 ..................................................................................... 104 50 ..................................................................................... 232 51NFPA ....................................................................... 231 56 ..................................................................................... 232 58 ..................................................................................... 233 65 ........................................................................................ 33 65XT-3/8 ........................................................................ 33 66 ......................................................................................... 34 67SS ................................................................................. 35 68SS ................................................................................. 35 69 ........................................................................................ 37 69R .................................................................................... 38 75 ..................................................................................... 234 76 .......................................................................... 204-205 77 .......................................................................... 206-207 78 ..................................................................................... 229 98 ..................................................................................... 252 98B ................................................................................. 252 99 ..................................................................................... 251 109DD ................................................................ 210-211 120 ..................................................................................... 68 120MJ ............................................................................. 69 120RWA ........................................................................ 67 120W ............................................................................... 69 130 ..................................................................................... 46 200 ..................................................................................... 61 200C ................................................................................. 61 200F .................................................................................. 61 200H ................................................................................. 62 200S ................................................................................. 61 800 ........................................................................ 180-181 825 ........................................................................ 184-185 825A .............................................................................. 186 Part No. Page 828 ........................................................................ 182-183 906 .................................................................................. 179 907 .................................................................................. 189 909 .................................................................................. 187 910 .................................................................................. 188 975 .................................................................................. 190 980 .................................................................................. 192 980H .............................................................................. 192 981 .................................................................................. 191 985 .................................................................................. 193 986 .................................................................................. 193 990 .................................................................................. 195 990H .............................................................................. 195 991 .................................................................................. 196 1000 ..................................................................... 200-201 1001 ..................................................................... 198-199 2002 ............................................................................... 202 3000 ............................................................................... 197 ATB ................................................................................ 262 ATR ................................................................................ 251 AWA ............................................................................. 262 B22I ............................................................................... 216 B32I ............................................................................... 217 B52I ............................................................................... 218 B200 .............................................................................. 258 B201 .............................................................................. 258 B202 .............................................................................. 258 B202-1 ......................................................................... 258 B202-2 ......................................................................... 258 B218 .............................................................................. 116 B219 .............................................................................. 117 B303 thru B309 ........................................................ 36 B312-Series ............................................................... 39 B321-Series ............................................................... 36 B351L .............................................................................. 29 B355 .............................................................................. 203 B379 .............................................................................. 118 B479 .............................................................................. 119 B501 .............................................................................. 245 B650 .............................................................................. 203 B655 .............................................................................. 257 B656 .............................................................................. 257 B1999 .................................................................................95 B2400 ....................................................................... 90-91 B2417 ........................................................................... 146 B2499 ........................................................................... 209 B2500 ........................................................................... 212 Part No. Page B2501 ........................................................................... 214 B2503 ........................................................................... 215 B2505 ........................................................................... 214 B2506 ........................................................................... 214 B2508 ........................................................................... 214 B3014 ........................................................................... 213 B3014N ....................................................................... 213 B3019 ........................................................................... 209 B3031 .............................................................................. 31 B3033 .............................................................................. 31 B3034 .............................................................................. 32 B3036L ........................................................................... 29 B3037 .............................................................................. 30 B3040 .............................................................................. 39 B3042 .............................................................................. 44 B3042T ........................................................................... 45 B3045 .............................................................................. 44 B3050 .............................................................................. 40 B3054 .............................................................................. 42 B3054WO ..................................................................... 42 B3055 .............................................................................. 41 B3058 ........................................................................... 235 B3060 ........................................................................... 231 B3060L ......................................................................... 230 B3061 ........................................................................... 232 B3062 ........................................................................... 235 B3064 ........................................................................... 222 B3065 ........................................................................... 223 B3066 ........................................................................... 224 B3067 ........................................................................... 225 B3068 ........................................................................... 221 B3069E ........................................................................ 226 B3069W ...................................................................... 226 B3070 ........................................................................... 230 B3080L ......................................................................... 237 B3080S ........................................................................ 237 B3082 ........................................................................... 241 B3083 ........................................................................... 236 B3083WO .................................................................. 236 B3084 ........................................................................... 240 B3085 ........................................................................... 238 B3086 ........................................................................... 239 B3088 ........................................................................... 128 B3088S ........................................................................ 129 B3088T ........................................................................ 128 B3088ST ..................................................................... 129 B3089 ........................................................................... 131 Eaton 348 B-Line series Pipe Hangers & Supports Index Part No. Page B3090 ................................................................. 132-133 B3092 ................................................................. 136-137 B3093 ................................................................. 138-139 B3094 ........................................................................... 142 B3095 ................................................................. 134-135 B3096 ........................................................................... 130 B3097 ........................................................................... 140 B3098 ........................................................................... 141 B3100 ....................................................................... 50-51 B3100C ........................................................................... 52 B3100F ........................................................................... 52 B3102 .............................................................................. 53 B3104 .............................................................................. 58 B3104C ........................................................................... 58 B3104CT ........................................................................ 59 B3104CTC .................................................................... 59 B3104F ........................................................................... 58 B3106 .............................................................................. 57 B3106V ........................................................................... 57 B3108 .............................................................................. 54 B3109 .............................................................................. 56 B3110 ........................................................................... 109 B3114 ........................................................................... 110 B3114R ........................................................................ 124 B3117R ........................................................................ 125 B3117SL ..................................................................... 120 B3118SL ..................................................................... 121 B3119SL ..................................................................... 122 B3120 ........................................................................... 113 B3122 ........................................................................... 111 B3122A ........................................................................ 112 B3124 ........................................................................... 114 B3126 ........................................................................... 115 B3132 .............................................................................. 75 B3132W ......................................................................... 75 B3134 .............................................................................. 76 B3134W ......................................................................... 76 B3140 ....................................................................... 78-79 B3140C ................................................................... 78-79 B3140F .................................................................... 78-79 B3141 .............................................................................. 80 B3142 .............................................................................. 81 B3144 ....................................................................... 82-83 B3146 .............................................................................. 84 B3147A ............................................................. 146-147 B3147B ............................................................. 146-147 B3148 .............................................................................. 86 Part No. Page B3149 .............................................................................. 87 B3151 ........................................................................... 166 B3153 ........................................................................... 166 B3154 ........................................................................... 167 B3155 ........................................................................... 167 B3160 ................................................................. 158-163 B3161 ................................................................. 158-163 B3162 ................................................................. 158-163 B3163 ................................................................. 158-163 B3164 ................................................................. 158-163 B3165 ................................................................. 158-163 B3170CT ........................................................................ 60 B3170CTC .................................................................... 60 B3175 .............................................................................. 65 B3175CT ........................................................................ 65 B3180 .............................................................................. 89 B3180FL ......................................................................... 88 B3184 ........................................................................... 105 B3188 ................................................................. 246-247 B3188C .............................................................. 246-247 B3190 .............................................................................. 66 B3191 .............................................................................. 66 B3195 ........................................................................... 143 B3195CT ..................................................................... 143 B3198H .......................................................................... 63 B3198HCT .................................................................... 64 B3198R ........................................................................... 63 B3198RCT .................................................................... 64 B3199R ........................................................................ 229 B3199RCT ................................................................. 229 B3200 ........................................................................... 244 B3200L ......................................................................... 244 B3201 ........................................................................... 248 B3201L ......................................................................... 248 B3201LWO ............................................................... 248 B3201WO .................................................................. 248 B3202 ........................................................................... 250 B3203 ........................................................................... 249 B3205 ........................................................................... 251 B3205L ......................................................................... 251 B3210 ........................................................................... 254 B3210L ......................................................................... 254 B3210X ........................................................................ 255 B3210XL ..................................................................... 255 B3211 ........................................................................... 254 B3211L ......................................................................... 254 B3211X ........................................................................ 255 Index Part No. Page B3211XL ..................................................................... 255 B3212 ........................................................................... 256 B3213 ........................................................................... 253 B3214 ........................................................................... 253 B3220 ........................................................................... 258 B3222 ........................................................................... 243 B3223-3/8 .................................................................. 249 B3224 ........................................................................... 250 B3224CT ..................................................................... 250 B3228 ........................................................................... 256 B3234 ........................................................................... 259 B3248 ........................................................................... 258 B3256 ........................................................................... 148 B3257 ........................................................................... 149 B3262 .............................................................................. 70 B3264 ........................................................................... 123 B3281 ................................................................. 144-145 B3282 ................................................................. 144-145 B3283 ................................................................. 144-145 B3284 ................................................................. 144-145 B3285 ................................................................. 144-145 B3286 ................................................................. 144-145 B3287 ................................................................. 144-145 B3291 .............................................................................. 43 B3292 .............................................................................. 43 B3293 .............................................................................. 43 B3294 .............................................................................. 43 B3295 .............................................................................. 43 B3296 .............................................................................. 43 B3297 .............................................................................. 43 B3298 .............................................................................. 43 B3362 .............................................................................. 29 B3363 .............................................................................. 30 B3364 .............................................................................. 30 B3365 .............................................................................. 30 B3373 .............................................................................. 73 B3373C ........................................................................... 73 B3373CT ........................................................................ 74 B3373CTC .................................................................... 74 B3373F ........................................................................... 73 B3380 ........................................................................... 127 B3382 ........................................................................... 127 B3383 ........................................................................... 127 B3384 ........................................................................... 127 B3386 ........................................................................... 127 B3387 ........................................................................... 127 B3690 .............................................................................. 55 B-Line series Pipe Hangers & Supports 349 Eaton Index Index Part No. Page B3690C ........................................................................... 55 B3690F ........................................................................... 55 B3891 ................................................................. 150-153 B3892 ................................................................. 150-153 B3893 ................................................................. 150-153 B3894 ................................................................. 150-153 B3895 ................................................................. 150-153 B3896 ................................................................. 150-153 B3897 ................................................................. 150-153 B3991 ................................................................. 154-157 B3993 ................................................................. 154-157 B3993B ............................................................. 154-157 BD40 ............................................................................. 219 BE5-8 ............................................................................ 219 BE9-12 ......................................................................... 219 BH-2-4 ............................................................................ 71 BH-2-4-R ...................................................................... 71 BH-5-8 ............................................................................ 71 BH-5-8-R ...................................................................... 71 BH-9-12 ......................................................................... 71 BH-9-12-R .................................................................... 71 BKA Series ............................................................. 315 BKB Series ............................................................. 314 BKC100 ....................................................................... 307 BKC200 ....................................................................... 307 BKCC ............................................................................ 308 BKF100-4 ................................................................... 309 BKF100-6 ................................................................... 309 BKH Series ............................................................. 312 BKL Series ............................................................... 311 BKP10063 .................................................................. 308 BKP10094 .................................................................. 308 BKP20125 .................................................................. 308 BKP20188 .................................................................. 308 BKW063 ..................................................................... 307 BKW094 ..................................................................... 307 BKW125 ..................................................................... 307 BKW188 ..................................................................... 307 BKYH Series .......................................................... 313 BKYH-18-094 .......................................................... 312 BKYH-30-094 .......................................................... 312 BL1400 ........................................................................... 71 BL1410 ........................................................................... 71 BL1420 ........................................................................... 71 BL1430 ........................................................................... 71 BL1440 ........................................................................... 71 BL1450 ........................................................................... 71 Part No. Page BL1460 ........................................................................... 71 BL1470 ........................................................................... 71 BL1480 ........................................................................... 71 BL1490 ........................................................................... 71 BPCH200 ......................................................... 170-171 BPCH300 ......................................................... 170-171 BPCH400 ......................................................... 170-171 BPCH500 ......................................................... 170-171 BPCH600 ......................................................... 170-171 BPCH800 ......................................................... 170-171 BPIC Series ............................................................ 107 BPRC Series .......................................................... 106 BPS200 ............................................................. 168-169 BPS300 ............................................................. 168-169 BPS400 ............................................................. 168-169 BPS500 ............................................................. 168-169 BPS600 ............................................................. 168-169 BPS800 ............................................................. 168-169 BPSC Series .......................................................... 107 BRC CABLE ............................................................. 194 BVP Series ................................................................. 93 BVS-12 ........................................................................ 271 BVS-120 ..................................................................... 271 BVT Series ................................................................. 92 CHSCS Series ....................................................... 283 CHSCS-E Series .................................................. 283 CHSCS-F Series .................................................. 284 CH30SCS-E Series ............................................ 285 CH30SCS-ET Series ......................................... 285 CH30SCS-F Series ............................................ 286 CH30SCS-FT Series ......................................... 286 CLDP10 ....................................................................... 302 CNNK ........................................................................... 269 CNP ............................................................................... 268 DB__DS Series ......................................... 298-299 DB5 ................................................................................ 294 DB10 ............................................................................. 294 DB10-28 ...................................................................... 296 DB10-36 ...................................................................... 296 DB10-42 ...................................................................... 296 DB10-50 ...................................................................... 296 DB10-60 ...................................................................... 296 DB20 ............................................................................. 294 DB30 ............................................................................. 294 DB40 ............................................................................. 294 DB48 ............................................................................. 294 DB610 .......................................................................... 295 Part No. Page DB620 .......................................................................... 295 DB630 .......................................................................... 295 DB640 .......................................................................... 295 DB648 .......................................................................... 295 DBE10-8 ..................................................................... 301 DBE10-12 .................................................................. 301 DBE10-16 .................................................................. 301 DBM .............................................................................. 293 DBM__ Series ...................................................... 297 DBM__CT Series ............................................... 297 DBP ............................................................................... 293 DBR2-31/2 ................................................................ 300 DBR4-6 ........................................................................ 300 DBR8-10 ..................................................................... 300 DBR12-14 .................................................................. 300 DBR16-20 .................................................................. 300 DBR10-12 .................................................................. 301 DS16 x 2 ..................................................................... 256 FW .................................................................................. 261 FFW ............................................................................... 261 HHN ............................................................................... 260 HHSCS Series ....................................................... 287 HHSCS-E Series ................................................. 287 HHSCS-F Series .................................................. 288 HH30SCS-E Series ............................................ 289 HH30SCS-ET Series ......................................... 289 HH30SCS-F Series ............................................ 290 HH30SCS-FT Series ......................................... 290 HN .................................................................................. 260 IPH__ .............................................................................. 94 IPH18230 ...................................................................... 94 IPH__WO ..................................................................... 94 ISO .................................................................................... 95 JQA-__E Series .................................................. 275 JQA-__F Series ................................................... 276 JQAMTQN Series ................................... 278-279 JQB-__E Series .................................................. 275 JQB-__ET Series ............................................... 275 JQB-__F Series ................................................... 275 JQB-__FT Series ................................................ 275 JQB-__-3YW162 ................................................. 277 JQB-__-3YW325 ................................................. 277 JQB-__-3YW496 ................................................. 277 JQB-__-G213 ......................................................... 277 JQB-__-G303 ......................................................... 277 JQBTQN Series ........................................ 278-279 JQBX-__E Series ............................................... 275 Eaton 350 B-Line series Pipe Hangers & Supports Part No. Page JQBX-__ET Series ............................................ 275 JQBX-__F Series ............................................... 276 JQBX-__FT Series ............................................ 276 JQBX-__-3YW162 .............................................. 277 JQBX-__-3YW325 .............................................. 277 JQBX-__-3YW496 .............................................. 277 JQBX-__-G213 ...................................................... 277 JQBX-__-G303 ...................................................... 277 JQBXTQN Series ..................................... 278-279 JQE-__E Series ................................................... 275 JQETQN Series ......................................... 278-279 JQE-__F Series ................................................... 276 JQF-__F Series .................................................... 276 JQF-__-3YW1036 ............................................... 277 JQF-__-G853 .......................................................... 277 JQF-__-G1223 ....................................................... 277 LW .................................................................................. 261 N2500 ........................................................................... 212 NNP ............................................................................... 267 OSA-__E Series .................................................. 273 OSA-__F Series .................................................. 273 OSB-__E Series .................................................. 273 OSB-__ET Series ............................................... 273 OSB-__F Series .................................................. 273 OSB-__FT Series ............................................... 273 OSB-__-3YW162 ................................................. 274 OSB-__-3YW325 ................................................. 274 OSB-__-3YW496 ................................................. 274 OSB-__-G213 ......................................................... 274 OSB-__-G303 ......................................................... 274 OSE-__E Series ................................................... 273 OSE-__F Series ................................................... 273 OSF-__F Series ................................................... 273 OSF-__-3YW1036 ............................................... 274 OSF-__-G853 .......................................................... 274 OSF-__-G1223 ....................................................... 274 RH-__-A Series ................................................... 282 RH-__-B Series ................................................... 282 RH-__-C Series ................................................... 282 RHD-__-A Series ............................................... 282 RHD-__-B Series ............................................... 282 RHD-__-C Series ................................................ 282 RHD-__-E Series ................................................ 282 RM-__A Series .................................................... 272 RM-__B Series .................................................... 272 RM-__C Series .................................................... 272 RM-__F Series ..................................................... 272 Part No. Page RM-D-__A Series .............................................. 272 RM-D-__B Series .............................................. 272 RM-D-__C Series .............................................. 272 RM-D-__F Series ............................................... 272 RQ-A Series ................................................. 280-281 RQ-B Series ................................................. 280-281 RQ-C Series ................................................. 280-281 RQD-A Series ............................................. 280-281 RQD-B Series ............................................. 280-281 RQD-C Series .............................................. 280-281 SC228 ........................................................................... 252 VRP ................................................................................ 270 Part No. B-Line series Pipe Hangers & Supports 351 Index Page Eaton Index Eaton 352 B-Line series Pipe Hangers & Supports Eaton reserves the right to make changes to the specifications, materials, equipment, prices, or the availability of products at any time without prior notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time of publication, we cannot accept responsibility for inaccuracies resulting from undetected errors or omissions. B-Line series Pipe Hangers & Supports Eaton U.S. Customer Service Center is staffed Monday through Friday from 7 a.m. to 5:00 p.m. Central Standard Time. For more information, visit Eaton.com/b-lineseries. Eaton 509 West Monroe Street Highland, IL 62249 United States Phone: (800) 851-7415 www.cooperbline.com/contactus Cooper Industries Middle East LLC PO Box 70160 Al Khobar - 31952 Kingdom of Saudi Arabia Phone: +966 506 395 973 www.eaton.com/b-lineseries Eaton 5925 McLaughlin Road Mississauga, ON L5R 1B8 Canada Phone: (800) 569-3660 www.cooperbline.com/contactca Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com B-Line Division 509 West Monroe Street Highland, IL 62249 Phone: 800-851-7415 Fax: 618-654-1917 www.cooperbline.com � 2019 Eaton All Rights Reserved Printed in USA Publication No. CA310001EN October 2019 10M (PH-20) Eaton is a registered trademark All other trademarks are property of their respective owners.