Ground Mounting System I Installation Manual PV6X120RACK PV6X250RACK. 2 www.Aimscorp.net Why Hopergy Thank You For Choosing AIMS Power! AIMSwe Po r is a leading supplier of solar products, specializing in PV mounting systems. We have been providing products for back up and off grid power applications for over 20 years. AIMS
Hopergy Ground Mounting System IV Installation Manual V2.2 Author: Created Date: 5/28/2012 5:46:26 PM ...
. Ground Mounting System I Installation Manual. PV6X120RACK PV6X250RACK.
PV6X120RACK PV6X250RACK Ground Mounting System I Installation Manual Thank You For Choosing AIMS Power! AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We have been providing products for back up and off grid power applications for over 20 years. AIMS Power has DC to AC power inverters, deep cycle batteries, solar charge controllers, generators and cables. We guarantee our products are of the highest quality. Why Hopergy 2 www.Aimscorp.net AIMS Power's innovative ground mount assembly is fast, convenient and secure. Attach clamps and brackets to rails in one sliding motion. The racking system includes pre-assembled legs that unfold quickly, allowing for easy bolt connection, minimizing labor. Various types of bases may be used. Check with local regulatins. When unpacking the system familiarize yourself with all components and confirm all parts arrived in good condition. Use proper safety precautions. 3 www.Aimscorp.net The racks are durable and made of Aluminium 6005-T5 and stainless steel SUS304 hardware, includes a 25 year warranty. Compliant with the following standards: GB50009-2001 GB50011-2001 GB/T 13912-92 GBT 14846-2008 GB-T 6892-2006 GB50429-2007 GB50017-2003 AS NZS 1170 ASCE/SEI 7-05 ASCE/SEI 7-010 2007 California Administrative Code IBC 2006 Euro Code 8 DIN1055 EN 1991-1-3 - Snow Load EN 1991-1-4 - Wind Actions 4 www.Aimscorp.net Planning the Array Layout *Solar panel orientation is portrait when viewing rack from the front. . . PV6X120 - Fits @120-170 Watt Panels PV6X250 - Fits @230-330 Watt Panels 87"L x 4 1/2"H x 2 1/4"W PV6X120RACK RAIL 126"L x 3 7/8H" x 2 3/8"W PV6X250RACK RAIL 86 5/8" 14 1/2" 35 1/4" 53 3/8" 48 7/8" 55 3/8" 60 7/8" PV6X120RACK www.Aimscorp.net 125 7/8" 23 1/4" 67 3/8" 63 1/2" 48 5/8" 69 1/2" 75 1/2" PV6X250RACK 5 Base Foot Dimension: Using M10 Grade 5.8 Carbon Steel anchor studs with Ramset Chemset REO502 chemical injection anchoring system. Minimum anchor embedment depth of 90mm with concrete strength of 32MPa. There are several ways to mount the racks depending on application 6 and structural guidelines. Check with local area. Maximum spacing between legs: A B C Features: Design Life Importance Level Annual Probability of Exceedance Terrain Category to AS1170.2 Maximum Pitch Aluminum Rails Maximum Solar panels 25 years Type 2: Ordinary 1/250 2 20° 6005 - T5 6 7 www.Aimscorp.net Components List Product Name 1 HD Rail Picture 2 End Clamp 3 Mid Clamp HD Rail Clamp 4 5 Pre-assembled Leg Material Description AL 6005-T5 Quantity 4 AL 6005-T5 IncludesQuantity 9 a. A2-70 M8 Hexagon screw b. Aluminum fixing nut AL 6005-T5 IncludesQuantity 9 a. A2-70 M8 Hexagon screw b. Aluminum fixing nut AL 6005-T5 IncludesQuantity 16 a. A2-70 M8 Hexagon screw b. Aluminum fixing nut AL 6005-T5 & SUS 304 Quantity 2 8 www.Aimscorp.net Installation Steps 1. Unfold the pre-assembled leg and connecting upright. Fasten the base of the legs to the attached anchor bolts. Tighten all anchor bolts to secure leg and upright. 9 www.Aimscorp.net . 10 www.Aimscorp.net 2. Once legs are secure, ensure the legs and uprights are aligned before installing the cross rails. 11 www.Aimscorp.net 3. Before installing the rails, mark the position of the rails on the upright. To assist installers, the bottom rail clamps are pre-assembled in the recommended position. Adjust as required. L=Solar Panel length. 4. Place the rails on the pre-assembled legs, adjust the rails so they are evenly aligned. Tighten clamps to secure. 12 www.Aimscorp.net 13 www.Aimscorp.net 5. Place solar panels on the rails. 6. Use end clamps with,M8*25 Hexagon screws and fixing nuts to attach solar panels to the rails. Adjacent solar panels are attached by using mid clamps with M8 Hexagon screws. (The hexagon screw length is determined by the solar panel's thickness 14 www.Aimscorp.net 15 www.Aimscorp.net 8. Repeat steps until installation is completed. AIMS POWER 9550 Gateway Drive Reno, NV 89521 Tel: (775) 359-6703 Fax: (775) 359-6753 Email: sales@aimscorp.net techsupport@aimscorp.net 16 www.Aimscorp.netAcrobat Distiller 7.0 (Windows)