shall apply to any installation occurring on or after April 8, 2019. If the Products are used in conjunction with other Schluter products, a different Schluter warranty may apply.
FINISHING AND EDGE PROTECTION WALL AND COUNTERTOP PROFILES INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE 2.5 Schluter -RONDEC-DB 2.1 Schluter -RONDEC 2.2 Schluter-DESIGNLINE 2.6 Schluter -ECK-E 2.8 Schluter-RONDEC-STEP 2.7 Schluter -ECK-K 2.9 Schluter -RONDEC-CT 2.10 Schluter -QUADEC 2.11 Schluter -QUADEC-FS 2.3 Schluter -JOLLY 1.9 Schluter -DECO-SG
WALL AND COUNTERTOP PROFILES INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE FINISHING AND EDGE PROTECTION 2.3 Schluter®-JOLLY 2.10 Schluter®-QUADEC 16.2 Schluter®-DESIGNBASE-SL = H 11,5 2.5 Schluter®-RONDEC-DB EV 90° 2.13 Schluter®-DIADEC 45° 2.11 Schluter®-QUADEC-FS 2.1 Schluter®-RONDEC 2.17 Schluter®-FINEC 135° 2.14 Schluter®-DECO-DE = H 2.6 Schluter®-ECK-E 2 2.2 Schluter®-DESIGNLINE 135° 2.8 Schluter®-RONDEC-STEP =H 1.9 Schluter®-DECO-SG 2.12 Schluter®-INDEC 2.7 Schluter®-ECK-K 2.7 SEDc90h° luter®-ECK-KI/-KHK 2.9 Schluter®-RONDEC-CT = H = A 2.11 Schluter®-SCHIENE-STEP WALL AND COUNTERTOP PROFILES Ceramic and stone tiles are durable, decorative effect, the profile protects tile edges hygienic, heat resistant, and easy to maintain, against damage caused by mechanical stresses. representing the ideal surface covering for QUADEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also walls and countertops. However, lack of trim be used as a stair nosing or floor transition profile. In pieces such as bullnose or quarter round in addition, QUADEC is suitable for transitions, corners, 135° many tile lines can limit designers' options. Schluter®-Systems offers various finishing and edge-protection profiles for walls and countertops that offer increased design flexibility because they can be integrated with any field tile to create a beautiful, durable installation. Application and Function Wall Profiles or dado coverings with other covering materials; for example, carpet, parquet, natural stone tiles, or poured epoxy coverings. The integrated joint spacer forms a defined joint cavity with the tile. Schluter®-QUADEC-K is a variant of the profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. Alternatively, the profile may be installed with an adhesive such as Schluter®-KERDI-FIX. QUADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings up to 1/2" (12.5 mm) thick. The profile 2.14 Schluter®-DECO-DE is a stainless steel finishing and edge-p=rHotection profile for 135° outside corners for tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a flat surface. The profile is available in stainless steel and brushed stainless steel. DECODE allows for modern decorative design and interesting contrasts. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. =H is particularly suited for finishing edges in retrofit applications, such as thin porcelain panel installation over existing wall tiles. QUADEC-K is available in anodized aluminum. Note: QUADEC in stainless steel does not feature 2.3 Schluter®-JOLLY is a finishing and edgeprotection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and an 87° sloped vertical wall section that provides a decorative finish and protects adjacent tiles. The profile is available in chrome-plated solid brass, color-coated aluminum, textured color-coated aluminum, anodized aluminum, and PVC. Schluter®-SCHIENE features the same design as JOLLY and is also available in solid brass, aluminum, and stainless steel. Please see the Schluter®-Systems Illustrated Price List for more details. The range of available sizes and finishes permits the matching of JOLLY to a wide variety of tile and grout colors and allows many design opportunities through the use of contrasting colors. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. the integrated joint spacer. Matching inside/outside corners and connectors are available. 2.1 Schluter®-RONDEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a symmetrically rounded outer corner with 1/4" (6 mm) radius along the surface edge. The profile is available in stainless steel, solid brass, chrome-plated solid brass, anodized aluminum, color-coated aluminum, textured color-coated aluminum and PVC. RONDEC's wide range of materials, colors, and surface finishes allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. RONDEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing or transition profile. In addition, RONDEC is suitable for transitions, corners, or dado coverings with other covering materials; 1.9 Schluter®-DECO-SG is a decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm) -wide channel that creates a shadow gap between tile courses or other wall covering. The profile may also be used as a support channel for glass walls. The 1/2" (12.5 mm) wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" (15 mm) wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm). DECOSG is available in anodized aluminum and stainless steel, and features a trapezoid-perforated anchoring leg that is secured in the bond coat beneath the tile. 2.17 Schluter®-FINEC is a finishing and edge p2romtmec-t3io/3n2" profile for the o3u.5tsmidme- 1c/8o"rners of tile coverings or mosaics. It features a trapezoidperforated anchoring leg that is secured in the mortar13b5o° nd coat beneath the13t5ile° and provides a slim, elegant corner. The profile is available in stainless steel, anodized aluminum, and textured color-coated aluminum. FINEC, in stainless steel, is particularly resistant to wear when used as edge protection. It may also be used as a stair nosing profile. 2.10 Schluter®-QUADEC is a finishing and for example, carpet, parquetry, natural stone tiles, edge-protection profile for the outside corners of or cold-cured resin coatings. The integrated joint tiled surfaces. It features a trapezoid-perforated spacer forms a defined joint cavity with the tile. anchoring leg that is secured in the mortar bond Note: RONDEC, in stainless steel and solid brass, coat beneath the tile and a reveal that forms a do not feature the integrated joint spacer. Matching square outer corner along the surface edge. inside and outside corners, including sink corners, The profile is available in stainless steel, stainless steel with structured finish, anodized aluminum, color-coated aluminum, textured color-coated and connectors are available. Matching end caps are available for RONDEC in stainless steel. 2.13 Schluter®-DIADEC is an anodized aluminum finishing and edge-protection profile for tiled edges aluminum, and PVC. QUADEC allows for modern decorative design and interesting contrasts. The atrnadpeozuotidsi-dpeercfo4or5ran°teerds of tiled surfaces. anchoring leg that It is features secured a in 4 profile can be combined with the QUADEC-FS the mortar bond coat beneath the tile and a reveal feature strip profile and the DESIGNLINE border that forms a 45° beveled edge. DIADEC features profile for further design options. In addition to its integrated joint spacers that establish defined joint cavities between the tile and the profile. 2 WALL AND COUNTERTOP PROFILES Schluter®-DIADEC-K is a variant of the profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. DIADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings at least 1/4" (6 mm) thick. The profile is particularly suited for finishing edges in retrofit applications, such as tile installation over existing wall tiles. Note: The outside corner can be used with any size of the DIADEC profile. 2.12 Schluter®-INDEC is an anodized aluminum finishing and edge-protection profile for ouEtsDid9e0° corners of tiled surfaces. It features a trapezoidperforated anchoring leg that is secured in the mortar bond coat beneath the tile, and the visible surface forms a recessed decorative channel. INDEC can be used as a transition or stop profile to a door or window frame. Matching outside corners are available. be combined with the cove-shaped stainless steel profiles Schluter®-DILEX-EHK (for inside wall corners and floor/wall transitions) and Schluter®-DILEX-HKS (for floor/wall transitions). ECK-KI ECK-KHK 2.7 Schluter®-ECK-KI/-ECK-KHK are stainless steel profiles that are subsequently bonded to the inside corners of existing tile or other wall coverings to produce a clean, decorative finish. As such, the profiles can be installed as a repair so that existing damaged corners do not have to be replaced. ECK-KHK provides a 5/16" (8 mm) radius to prevent the accumulation of dirt and make cleaning simple. Thus, the profile is especially suited for commercial kitchens, bathrooms, food processing plants or any environment where a sanitary corner is desired. Note: Matching inside and outside corners and connectors are available for ECK-KHK. Border Profiles = H 2.5 11.5 mm - 15/32" Schluter®-RONDEC-DB, an anodized 16.2 Schluter®-DESIGNBASE-SL is a finishing aluminum, decorative profile for wall and skirting profile used as an alternative to baseboards. The edges, protects the surface covering from profile is available in anodized aluminum and color- mechanical or impact stresses. The profile features coated aluminum. It features a clean, finished look a trapezoid-perforated anchoring leg that is secured and is simply attached to the wall with a suitable in the mortar bond coat beneath the tile and a adhesive. The profile can be equipped with an pronounced visible surface that establishes a clean optional sealing lip to help protect the floor-to- line along tile edges and allows for decorative design. wall transition from moisture and to reduce the RONDEC-DB can also be used as a finishing profile transmission of impact sound. within wall surfaces; for example, where other covering materials such as plaster, wallpaper, or tiles are to be joined. ECK-E ECK-K 2.6/2.7 Schluter®-ECK-E/-K are stainless steel edging profiles for 90° or 135° outside corners of tiled walls that offer excellent edge protection against mechanical stresses; for example, in industrial kitchens and hospitals. In addition, the profiles produce a radiused edge along the outside wall corner for a clean, decorative finish. ECK-E features trapezoid-perforated anchoring legs that are secured in the mortar bond coat beneath the tile, while ECK-K is subsequently bonded to the outside corners of existing installations. As such, ECK-K can be installed as a repair so that existing damaged corners do not have to be replaced. ECK-E/-K are especially suitable for areas where strict hygienic requirements must be met (e.g., hospitals, industrial kitchens, clean rooms, washrooms, and food-processing plants) and where aesthetic appeal is desired. ECK-E/-K can 3 2.11 Schluter®-QUADEC-FS is a double-rail feature strip profile for producing accents in tile fields on walls, chair rails, and various other decorative applications. The profile is available in anodized aluminum and features a 2" (51 mm)-wide recessed section with dovetailed grooves to which field or accent tile up to 5/16" (8 mm)-thick is bonded. The top and bottom edges of the profile are square and designed to integrate with the QUADEC profile. QUADEC-FS is anchored in the mortar bond coat between tile courses via its cross-sectional shape and can be used with thicker tiles by building up the setting material behind the profile. The profile may also be attached to the substrate with fasteners (e.g., where the profile is not surrounded by field tile). Note: Matching inside corners/outside corners/end caps are available. 2.2 Schluter®-DESIGNLINE is a border profile for producing decorative designs in interior wall coverings. The profile is available in stainless steel, stainless steel with structured finish, chrome-plated solid brass, and anodized aluminum and is designed to coordinate with RONDEC and QUADEC profiles for outside wall corners. DESIGNLINE has a 1" (25 mm)-wide surface area and a thickness of 1/4" (6 mm). It is anchored in the mortar bond coat between tile courses via its cross-sectional shape and can be used with thicker tiles by building up the setting material behind the profile. Countertop Profiles 2.11 Schluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile over tile applications on walls. The profile features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall tile edge. SCHIENE-STEP is available in anodized aluminum and brushed stainless steel versions, which have different shapes and intended uses. The stainless steel version is available in three vertical leg lengths: 1-1/2" (39 mm) for countertops, 1-3/16" (30 mm) for stairs, and 7/16" (11 mm) for tile over tile applications. Matching inside and outside corners and connectors are available, depending on the vertical leg length. The anodized aluminum version is intended for residential stair applications (stairs not exposed to heavy traffic). It is available in two vertical leg lengths, 1-3/16" (30 mm) and 1-1/2" (39 mm), to cover the edge of the sub-assembly. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. Accessories are not available for the anodized aluminum version. 2.8 Schluter®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The profile features a trapezoid-perforated anchoring leg, which is secured in the mortar bond coat beneath the tile. The top of the profile features a symmetrically rounded edge with 1/4" (6 mm) radius, which matches the RONDEC profile, while the vertical WALL AND COUNTERTOP PROFILES leg of the profile hides the exposed edge of the sub-assembly. In addition, the profile effectively protects tiles in the edge area from mechanical and impact stresses. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. RONDEC-STEP is suitable for residential applications, e.g., stairs not exposed to heavy traffic, and countertops. RONDEC-STEP is available in two different vertical leg lengths, 1-1/2" (39 mm) and 2-1/4" (57 mm), to cover the edge of the sub-assembly. The profile is available in anodized aluminum with various finishes to allow for decorative design and interesting accents. Matching corners for the RONDEC-STEP are available. 2.9 Schluter®-RONDEC-CT is a double-rail edging profile for countertops to be fitted with a ceramic or dimension stone tile covering. The profile features a trapezoid- perforated anchoring leg that is secured in the mortar bond coat beneath the tile, while the face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded. The top and bottom edges of the profile are symmetrically rounded (1/4" - 6 mm radius) and match the RONDEC profile. The 1-1/2" (39 mm) vertical leg of the profile hides the exposed edge of the sub-assembly. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. The profile is available in anodized aluminum and textured color-coated aluminum with various surface finishes to allow for decorative design and interesting accents. Matching inside and outside corners are available. Wall Access Panel System 11.1 Schluter®-REMA is the ideal system for creating concealed access panels in tiled wall coverings. The REMA assembly kit consists of four aluminum brackets with molded casings containing magnets that are clamped to lateral, movable guide shoes, and four ferro-magnetic metal counterplates. REMA's installation is independent of tile size and thickness and enables exact matching of the access panel to the overall joint design. Thus, panels that access electrical or plumbing components do not impair the visual appearance of the tile covering. Material Properties and Areas of Application Schluter® wall and countertop profiles are resistant to most chemicals encountered in tiled environments. In special cases, the suitability of a proposed type of material must be verified based on the anticipated chemical, mechanical, and/or other stresses. Exceptions and special considerations are listed below. Stainless steel profiles are roll-formed, resulting in a slightly different contour from those made of extruded brass or aluminum. Stainless steel can sustain high mechanical stresses and is particularly well suited for applications requiring resistance against chemicals and acids; for example in the food industry, breweries, dairies, commercial kitchens, and hospitals, as well as in residential applications. Typically, the profiles are formed using stainless steel 304 (1.4301 = V2A). For more severe chemical exposure, such as de-icing salts and chemicals used in swimming pools, we recommend the use of stainless steel 316 L (1.4404 = V4A), which offers even higher corrosion resistance than the 304. Even stainless steel cannot withstand all chemical exposures, such as hydrochloric acid, hydrofluoric acid or certain chlorine, chloride and brine concentrations. Solid brass sustains high levels of mechanical stress; for example, as edge protection for outside wall corners or edges of surface coverings. Brass is resistant to most chemicals used in tiled environments. Solid brass that is exposed to air will oxidize, resulting in a natural patina. If exposed to moisture or aggressive substances, heavy oxidation and spotting may occur. Chrome-plated brass is especially suited for wall corners and finishing applications. It is ideal for matching chrome fixtures. Surface areas must be protected against abrasion or scratching. Aluminum profiles must be tested to verify their suitability if chemical stresses are anticipated. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation). Therefore, it is important to remove mortar or grout residue from visible surfaces. In addition, ensure that the profile is solidly embedded in the setting material and that all cavities are filled to prevent the collection of alkaline water. Anodized aluminum profiles feature an anodized layer that retains a uniform appearance during normal use, but is not color-stable in exterior applications. The surface is susceptible to scratching and wear and may be damaged by grout or setting material. Therefore, these materials must be removed immediately. Otherwise, the description regarding aluminum applies. Color-coated aluminum and textured colorcoated aluminum are pretreated (chromated) aluminum that is color-coated with a polyurethane powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Protect the profile against abrasion or scratching. PVC profiles are made of pre-colored, rigid PVC that resists bending or scratching. The material is UV-resistant, though not permanently colorstable, in exterior applications. PVC profiles are not suited for corners or transitions subjected to heavy mechanical stresses (e.g., at step edges or floor transitions). Cutting Profiles Observe all safety instructions and standards as directed by the cutting tool manufacturer, including protective eyewear, hearing protection, and gloves. Always measure carefully and dry fit the profiles, corners, and connectors to ensure proper fit and alignment prior to setting tile. Plastic profiles may be cut using Schluter®-SNIPS or similar. It is important to make sure the blade is sharp to ensure a clean cut. Aluminum profiles may be cut using any of the following options: · Hacksaw with a bimetal blade and the highest teeth per inch (TPI) available. · Variable-Speed Angle Grinder set to the lowest speed using the Schluter®-PROCUT-TSM cutting wheel. · Chop saw or Miter Saw with a non-ferrous blade. Regardless of the cutting tool used, remove any burrs from the cut end of the profile with a file or similar before installation. Stainless steel profiles may be cut using any of the following options: · Variable-Speed Angle Grinder set to the lowest speed using the Schluter®-PROCUT-TSM cutting wheel. · Band Saw with a metal cutting blade. Regardless of the cutting tool used, remove any burrs from the cut end of the profile with a file or similar before installation. Installation JOLLY, QUADEC, RONDEC, DECO-DE, DIADEC, FINEC, INDEC, DECO-SG, ECK-E, RONDEC-DB, SCHIENE-STEP, RONDEC-STEP, and RONDEC-CT 1. Select the profile according to the tile thickness and format. Note: RONDECDB can be used with tiles 1/4" - 1/2" (6 - 12.5 mm). 2. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. If JOLLY, QUADEC, RONDEC, RONDEC-DB, DECO-DE, FINEC, or DIADEC is to be used as edging for an outside wall corner, finish tiling one wall first; then trowel thin-set mortar over the corner area of the second wall. 3. Press the perforated anchoring leg of profile into the mortar and align. 4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges. 4 WALL AND COUNTERTOP PROFILES 5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower. 5a. If the FINEC profiles, in aluminum, are used to create a 3 way external corner, into which the two upper profiles were fitted at an angle of 45°, cut the adjoining lower profile to size. The trapezoid-perforated anchor ing leg, including the joint spacer, must be cut off straight to the visible area by a minimum dimension x, depending on the profile length; see the AE illustration below. 5b. If the FINEC profiles, in stainless steel, are used to create a 3 way external corner, into which the two upper profiles were fitted at an angle of 45°, cut the adjoining lower profile to size. In this case, the trapezoidperforated anchoring leg must be cut off by a minimum dimension x, depending on the profile length, including the visible area has to be chamfered at a 45° angle; see the E illustration below. =X 45° =X E AE Note: With FINEC, chamfer tiles adjacent to the profile by 45°. RONDEC-DB is intended to be higher than the tiled surface. 6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel profiles, DECO-SG, INDEC, and RONDEC-DB, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm). 7. To set tile along the face of RONDEC-CT, apply thin-set mortar to the back of the tile using a margin trowel. Press the back-buttered tiles into the face of the profile, making sure to force thin-set mortar fully into the dovetailed grooves. The tiled surface should be flush with the outer edge of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower. Note: The recessed face accepts tile widths up to 1-1/8" (29 mm). 8. Fill joints completely with grout or setting material. Note: Remove the protective foil from ECK-E immediately after grouting. 9. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum. Note: Matching corners are available for QUADEC, RONDEC, INDEC, SCHIENE-STEP (stainless steel version, depending on vertical leg length), RONDECSTEP, and RONDEC-CT. Connectors are available for QUADEC, RONDEC , and SCHIENE-STEP (stainless steel version). 5 Corners and end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile. For installation of SCHIENE-STEP corners and connectors: Install using KERDI-FIX, silicone, or similar adhesive. Prior to application, any contactinhibiting substances (e.g., grease, etc.) must be removed. The accessories should overlap the profiles by at least 3/8" (10 mm). The accessories must be slid on the profiles during profiles installation (cannot be placed over the profiles after installation). For installation of RONDEC sink corners (1-1/2" radius): 1.Insert the sink corner connectors into the profiles. Apply thin-set mortar to the substrate and firmly embed the profiles into the mortar. 2.Using a margin trowel, fill the back of the sink corners with thin-set mortar. Install the corners over the connectors and align. Setting materials must be removed immediately. QUADEC-K/DIADEC-K 1. QUADEC-K may be used to cover assembly edges up to 1/2" (12.5 mm) thick. DIADEC-K may be used to cover assembly edges at least 1/4" (6 mm) thick. 2. Fill the profile cavity with thin-set mortar. 3. Using a notched trowel, apply thin-set mortar to the area where the profile is to be placed. 4. Press the profile into the mortar and align. Leave a space of approximately 1/16"-1/8" (1.5 3 mm) between the profile and tile. 5. Fill joints completely with grout or setting material. 6. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately. Note: QUADEC-K may also be adhered using KERDI-FIX. Matching inside/outside corners and connectors are available. Corners/end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. Connectors are held in place with a friction fit. Insert the connector into the profile approximately half the length of the connector piece and connect the adjacent profile. DESIGNBASE-SL 1. DESIGNBASE-SL is applied to prepared walls using KERDI-FIX or other suitable adhesive. Prior to applying the adhesive, make sure that all surfaces are free from adhesion-inhibiting substances such as oil or grease. 2. Apply beads of adhesive to the back of the profile and press the profile onto the wall, ensuring solid contact throughout. 3. Use a suitable cleaning agent to remove any excess adhesive from around the profile. Remove the protective foil. Note: The accessories must be slid on the profiles during installation (cannot be placed over the profiles after installation). The optional sealing lip is inserted into the profile prior to installation. ECK-K/-KHK/-KI 1. ECK-K/-KHK/-KI are applied to prepared wall corners using KERDI-FIX, silicone, or a similar adhesive. Prior to applying the adhesive, make sure that all surfaces are free from adhesioninhibiting substances such as oil or grease. Apply a bead of adhesive to the back of each of the profile legs; then press the legs onto the wall covering, ensuring that the lateral edges lie flat and have solid contact throughout. 2. Use a suitable cleaning agent to remove any excess adhesive from around the profile legs. 3. Remove the protective foil. Install ECK-KHK inside and outside corners using a permanently elastic, waterproof adhesive (e.g., KERDI-FIX or silicone). Prior to application, any contact-inhibiting substances (e.g., grease, etc.) must be removed. The connectors should overlap the profiles by at least 3/8" (10 mm). QUADEC-FS 1. Set tiles up to the area where QUADEC-FS is to be installed as a feature strip. 2. Using a notched trowel, apply a sufficient amount of thin-set mortar to this area and/ or to the back of QUADEC-FS and press the profile into the mortar and align. Leave a space of approximately 1/16" 1/8" (1.5 3 mm) between the profile and the tile. Note: QUADEC-FS may also be attached to the substrate with fasteners. 3. Set the adjacent row of tiles. Leave a space of approximately 1/16" 1/8" (1.5 3 mm) between the profile and the tile. 4. To set tile along the face of QUADEC-FS, apply thin-set mortar to the back of the tile using a margin trowel. Press the back-buttered tiles into the face of the profile, making sure to force thin-set mortar fully into the dovetailed grooves. The tiled surface should be flush with the outer edge of the profile. Note: The recessed face accepts tile widths up to 2" (51 mm). 5. Fill joints completely with grout or setting material. 6. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately. Note: Matching inside corners/outside corners/end caps are available. Corners/end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories. WALL AND COUNTERTOP PROFILES DESIGNLINE 1. DESIGNLINE may be used with tiles that are 1/4" (6 mm) thick or greater. 2. Set tiles up to the area where DESIGNLINE is to be installed as a decorative strip. Apply a sufficient amount of thin-set mortar to this area and/or to the back of DESIGNLINE and press the profile into the mortar until its surface is flush with the tile. 3. Set the adjacent row of tiles. 4. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" - 1/8" (1.5 - 3 mm). With the stainless steel and solid brass profiles, leave a space of approximately 1/16" - 1/8" (1.5 - 3 mm). 5. Fill joints completely with grout or setting material. REMA 1. Adhere an aluminum bracket to the back of each perimeter tile with thin-set mortar so that the magnet extends beyond the tile's edge. 2. Set tiles, with magnets attached, as perimeter limits, so that four magnets extend into the access opening. 3. To form the access panel cover, connect the corresponding number of panel cover tiles by attaching a tile to their backs with thin-set mortar. 4. Using KERDI-FIX, silicone, or a similar adhesive, adhere the counterplates to the back of the panel cover in alignment with the perimeter magnets. 5. After the adhesive has cured, install the cover and seal the surrounding joint with a colorcoordinated sealing compound. Note: If the access opening is substantially larger than 12" x 12" (30 x 30 cm), it may be necessary to install two additional magnets. Maintenance Schluter® wall and countertop profiles require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a mild household cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. All cleaning agents must be free of hydro-chloric, hydrofluoric acid, and chlorides. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Oxidation films on solid brass or aluminum may be removed with a common polishing agent, but will form again. In the case of chrome-plated brass, anodized aluminum, color-coated aluminum, and textured color-coated aluminum do not use abrasive cleaning agents. Product Item Numbers 2.3 Schluter®-JOLLY H = mm - in. H = 1/8"- 3/16" (3 - 4.5 mm) 1/8" - 3 mm H = 1/4" - 1/2" (6 - 12.5 mm) 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 H = mm - in. R = Radius Notes: · Radius available for JOLLY in metal profiles only. · JOLLY in polished aluminum and chrome-plated brass require a relatively large bending radius. 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 H = mm - in. 4.5 - 3/16 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 Chromeplated solid brass (MC) MC 60 MC 80 MC 100 MC 125 Satin copper anodized aluminum (AK) A 60 AK A 80 AK A 100 AK A 125 AK Brushed brass anodized aluminum (AMGB) A 60 AMGB A 80 AMGB A 100 AMGB A 125 AMGB Polished chrome anodized aluminum (ACG) A 60 ACG A 80 ACG A 100 ACG A 125 ACG Polished copper anodized aluminum (AKG) A 60 AKG A 80 AKG A 100 AKG A 125 AKG Item No. Bright black anodized aluminum (AGSG) A 45 AGSG A 60 AGSG A 80 AGSG A 100 AGSG A 125 AGSG Brushed chrome anodized aluminum (ACGB) A 60 ACGB A 80 ACGB A 100 ACGB A 125 ACGB Brushed copper anodized aluminum (AKGB) A 60 AKGB A 80 AKGB A 100 AKGB A 125 AKGB Item No. Satin nickel anodized aluminum (AT) A 60 AT A 80 AT A 100 AT A 125 AT Item No. Brushed antique bronze anodized aluminum (ABGB) A 60 ABGB A 80 ABGB A 100 ABGB A 125 ABGB Polished nickel anodized aluminum (ATG) A 60 ATG A 80 ATG A 100 ATG A 125 ATG Satin brass anodized aluminum (AM) A 60 AM A 80 AM A 100 AM A 125 AM Brushed nickel anodized aluminum (ATGB) A 60 ATGB A 80 ATGB A 100 ATGB A 125 ATGB Polished brass anodized aluminum (AMG) A 60 AMG A 80 AMG A 100 AMG A 125 AMG Brushed graphite anodized aluminum (AGRB) - A 60 AGRB A 80 AGRB A 100 AGRB A 125 AGRB Note: Additional finishes are available for this product. The design configuration of JOLLY is identical to that of SCHIENE (see Floor Profiles). However, their materials and finishes do vary. SCHIENE, in all materials and finishes, is suitable for floor applications, as well as wall and countertop applications. JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK, AKGB, AT, ATGB, ABGB and ACGB is also suitable for floors and may be used in such applications to increase design options. 6 WALL AND COUNTERTOP PROFILES 2.3 Schluter®-JOLLY H = mm - in. Item No. Color-coated aluminum (AC) PVC (P) 3 - 1/8 A 30 color* - 4.5 - 3/16 A 45 color* color* 45 6 - 1/4 A 60 color* color* 60 8 - 5/16 A 80 color* color* 80 10 - 3/8 A 100 color* color* 100 11 - 7/16 A 110 color* color* 110 12.5 - 1/2 A 125 color* color* 125 Length supplied: 8' 2-1/2" -- 2.5 m *Color Codes BW Bright white W White SP Sand pebble BH Bahama HB Light beige HG Light grey PG G Classic Grey grey GM Metallic grey GS Black RB1 Red brown SB Black brown * To complete the item number, add the color code (e.g., G 45). 1: RB (Red Brown) is only available in color-coated aluminum in sizes 80, 100, and 125. 2.3 Schluter®-JOLLY Item No. H = mm - in. Textured color-coated aluminum (TS) 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 A 60 color* A 80 color* A 100 color* A 110 color* A 125 color* Length supplied: 8' 2-1/2" -- 2.5 m *Color Codes TSR Rustic brown TSBG Greige TSDA Dark anthracite TSI Ivory TSLA Light anthracite TSB Beige TSSG Stone grey TSOB Bronze MGS Matte black MBW Matte white * To complete the item number, add the color code (e.g., A 60 TSC). TSC Cream TSG Pewter 2.3 Schluter®-JOLLY Length = 3.05 m - 10' Item No. H = mm - in. Polished chrome anodized aluminum (ACG) Satin nickel anodized aluminum (AT) 8 - 5/16 10 - 3/8 12.5 - 1/2 A 80 ACG/300 A 100 ACG/300 A 125 ACG/300 A 80 AT/300 A 100 AT/300 A 125 AT/300 Brushed antique bronze anodized aluminum (ABGB) A 80 ABGB/300 A 100 ABGB/300 A 125 ABGB/300 2.3 Schluter®-JOLLY Length = 3.05 m - 10' Item No. H = mm - in. Bright white PVC 8 - 5/16 10 - 3/8 12.5 - 1/2 (BW) BW 80/300 BW 100/300 BW 125/300 Stainless Steel Stainless steel = H 2.10 Schluter®-QUADEC Item No. H = mm - in. Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) 4.5 - 3/16 6 - 1/4 7 - 9/32 8 - 5/16 9 - 11/32 10 - 3/8 11 - 7/16 Q 45 E Q 60 E Q 70 E Q 80 E Q 90 E Q 100 E Q 110 E Q 60 EB Q 70 EB Q 80 EB Q 90 EB Q 100 EB Q 110 EB 12.5 - 1/2 14 - 17/32 Q 125 E Q 140 E Q 125 EB Q 140 EB Length supplied: 8' 2-1/2" -- 2.5 m Stainless steel 304 (1.4301 = V2A) square check (ES1) - Stainless steel 304 (1.4301 = V2A) leather texture (ES2) - Q 80 ES1 Q 100 ES1 Q 110 ES1 Q 125 ES1 - Q 80 ES2 Q 100 ES2 Q 110 ES2 Q 125 ES2 - Accessories End cap, outside/inside corner Item No. EV/ profile item number* H = mm - in. Connector for stainless steel profiles 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 V/RO 60 E V/RO 80 E V/RO 100 E V/RO 110 E V/RO 125 E 7 WALL AND COUNTERTOP PROFILES Aluminum Aluminum = H 2.10 Schluter®-QUADEC H = mm - in. Satin anodized aluminum (AE) 4.5 - 3/16 Q 45 AE 6 - 1/4 8 - 5/16 Q 60 AE Q 80 AE 10 - 3/8 Q 100 AE 12.5 - 1/2 Q 125 AE 15 - 9/16 Q 150 AE 20 - 3/4 Q 200 AE Length supplied: 8' 2-1/2" -- 2.5 m Accessories End cap, outside/inside corner Polished chrome anodized aluminum (ACG) Q 45 ACG Q 60 ACG Q 80 ACG Q 100 ACG Q 125 ACG - - Item No. Satin nickel anodized aluminum (AT) Q 45 AT Q 60 AT Q 80 AT Q 100 AT Q 125 AT - Item No. EV/ profile item number* How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., EV/ Q 80 E). Brushed antique bronze anodized aluminum (ABGB) Q 60 ABGB Q 80 ABGB Q 100 ABGB Q 125 ABGB - Inside Corner H = mm - in. Connector for aluminum profiles 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 V/Q 60 V/RO 80 V/RO 100 V/RO 125 Outside Corner 2.10 Schluter®-QUADEC Item No. H = mm - in. Textured color-coated aluminum (TS) 4.5 - 3/16 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 Q 45 color* Q 60 color* Q 80 color* Q 100 color* Q 110 color* Q 125 color* Length supplied: 8' 2-1/2" -- 2.5 m Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap. H = mm - in. Connector for textured color-coated aluminum profiles 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 V/Q 60 V/RO 80 V/RO 100 V/RO 110 V/RO 125 *Color Codes TSR Rustic brown TSBG Greige TSDA Dark anthracite TSI Ivory TSLA Light anthracite TSB Beige TSSG Stone grey TSOB Bronze MGS Matte black MBW Matte white * To complete the item number, add the color code (e.g., Q 60 TSC). Accessories End cap, outside/inside corner Item No. EV/ profile item number* Note: The matte black (MGS) and matte white (MBW) accessory pieces can only be used as outside corners or end caps. TSC Cream TSG Pewter 2.10 Schluter®-QUADEC Length = 3.05 m - 10' Item No. H = mm - in. Polished chrome anodized aluminum (ACG) 8 - 5/16 10 - 3/8 12.5 - 1/2 Q 80 ACG/300 Q 100 ACG/300 Q 125 ACG/300 8 WALL AND COUNTERTOP PROFILES Aluminum 2.10 Schluter®-QUADEC Item No. H = mm - in. Color-coated aluminum (AC) 4.5 - 3/16 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 Q 45 color* Q 60 color* Q 80 color* Q 100 color* Q 110 color* Q 125 color* *Color Codes BW Bright white W White SP Sand pebble PG Classic grey QG Quartz grey VG Traffic grey SB Black brown GS Black * To complete the item number, add the color code (e.g., Q 45 G). Accessories End cap, outside corner, 90° Item No. ED/ profile item number* PVC PVC 2.10 Schluter®-QUADEC Item No. H = PVC mm - in. (P) 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 PQ 60 color* PQ 80 color* PQ 100 color* PQ 110 color* PQ 125 color* *Color Codes BW Bright white HB Light beige GS Black W White HG Light grey SP Sand pebble PG Classic grey BH Bahama G Grey * To complete the item number, add the color code (e.g., PQ 80 PG). Accessories End cap, outside corner, 90° Item No. E/ profile item number* 12.5 mm - 1/2" Aluminum 12.5 mm - 1/2" 2.10 Schluter®-QUADEC-K Item No. H = mm - in. Satin anodized aluminum (AE) Polished chrome anodized aluminum (ACG) Satin nickel anodized aluminum (AT) 12.5 - 1/2 Q 125 AE K Q 125 ACG K Q 125 AT K Length supplied: 8' 2-1/2" -- 2.5 m Accessories End cap, outside/inside corner Connector Item No. EV/ Q 125 finish* V/RO 125 Brushed antique bronze anodized aluminum (ABGB) Q 125 ABGB K How to order corners: *To complete the item number for corners, add the corresponding finish (e.g., EV/ Q 125 AE). 2 mm - 3/32" 135° Stainless steel 3.5 mm - 1/8" 135° Aluminum 2.17 Schluter®-FINEC Item No. H = mm - in. Stainless steel 304 Satin anodized (1.4301 = V2A) aluminum (E) (AE) 3.5 mm - 1/8" 2.5 - 3/32 4.5 - 3/16 135° 7 - 9/32 9 - 11/32 11 - 7/16 12.5 - 1/2 F 45 E F 70 E F 90 E F 110 E F 125 E F 25 AE F 45 AE F 70 AE F 90 AE F 110 AE F 125 AE Length supplied: 8' 2-1/2" -- 2.5 m Textured & matte color-coated aluminum F 25 MBW F 45 + color* F 70 + color* F 90 + color* F 110 + color* F 125 + color* *Color Codes TSR Rustic brown TSC Cream TSDA Dark anthracite TSBG Greige TSLA Light anthracite TSI Ivory TSSG Stone grey TSB Beige TSOB Bronze TSG Pewter MGS Matte black MBW Matte white * To complete the item number, add the color code (e.g., F 70 TSC). 9 WALL AND COUNTERTOP PROFILES Aluminum Aluminum = H 11.5 mm 15/32" Aluminum 45° EV 90° Aluminum 45° 2.12 Schluter®-INDEC Item No. H = mm - in. Satin anodized aluminum (AE) Polished chrome anodized aluminum (ACG) 8 - 5/16 ED 90°IN 80 AE IN 80 ACG 10 - 3/8 IN 100 AE IN 100 ACG 11 - 7/16 IN 110 AE IN 110 ACG 12.5 - 1/2 IN 125 AE IN 125 ACG Length supplied: 8' 2-1/2" -- 2.5 m Accessories Outside corner 90° Item No. ED / IN profile item number* How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., ED / IN 100 AE). 16.2 Schluter®-DESIGNBASE-SL Item No. H = mm - in. Satin anodized aluminum (AE) Anodized aluminum with brushed stainless steel appearance (AEEB) 60 - 2-3/8 DB SL 60 AE DB SL 60 AEEB 80 - 3-1/8 DB SL 80 AE DB SL 80 AEEB Length supplied: 8' 2-1/2" -- 2.5 m Matte with colorcoated aluminum (MBW) DB SL 60 MBW DB SL 80 MBW Note: For reasons associated with production technology, inside corners ID / DB SL 60 AEEB and ID / DB SL 80 AEEB are not brushed. Accessories Outside corner, 90° Inside corner, 90° End cap (left) End cap (right) Connector Item No. ED / profile item number* ID / profile item number* EL / profile item number* ER / profile item number* V / profile item number* How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., ED / DB SL 60 AE). Schluter®-DESIGNBASE-SLZ Accessories Sealing lip Length supplied: 8' 2-1/2" -- 2.5 m Item No. DB ZS LL 2.13 Schluter®-DIADEC H = mm EV 90° - in. 8 - 5/16 10 - 3/8 451° 1 - 7/16 12.5 - 1/2 Satin anodized aluminum (AE) DI 80 AE 18 DI 100 AE 18 DI 110 AE 18 DI 125 AE 18 Accessories Outside corner, 90° Item No. Polished chrome anodized aluminum (ACG) DI 80 ACG 18 DI 100 ACG 18 DI 110 ACG 18 DI 125 ACG 18 Brushed chrome anodized aluminum (ACGB) DI 80 ACGB 18 DI 100 ACGB 18 DI 110 ACGB 18 DI 125 ACGB 18 Item No. EV/DI 518 finish* How to order corners: *To complete the item number for corners, add the corresponding finish (e.g., EV/DI 518 AE 18). 2.13 Schluter®-DIADEC-K Item No. Satin anodized aluminum (AE) Polished chrome anodized aluminum (ACG) DI 518 AE DI 518 ACG Length supplied: 8' 2-1/2" -- 2.5 m Brushed chrome anodized aluminum (ACGB) DI 518 ACGB Accessories Outside corner, 90° Item No. EV/DI 518 finish* How to order corners: *To complete the item number for corners, add the corresponding finish (e.g., EV/DI 518 AE 18). 10 WALL AND COUNTERTOP PROFILES Stainless Steel 2.1 Schluter®-RONDEC Stainless steel = H H = mm - in. Stainless steel 316L (1.4404 = V4A) (E/V4A) 4.5 - 3/16 - 6 - 1/4 RO 60 E/V4A 7 - 9/32 - 8 - 5/16 RO 80 E/V4A 9 - 11/32 - 10 - 3/8 RO 100 E/V4A 11 - 7/16 - 12.5 - 1/2 RO 125 E/V4A 15 - 9/16 - Length supplied: 8' 2-1/2" -- 2.50 m H = mm - in. Aluminum with stainless steel appearance 4.5 - 3/16 6 - 1/4 7 - 9/32 8 - 5/16 9 - 11/32 10 - 3/8 11 - 7/16 12.5 - 1/2 15 - 9/16 ED/RO 60 E ED/RO 80 E ED/RO 100 E ED/RO 125 E - Item No. Stainless steel 304 (1.4301 = V2A) (E) RO 45 E RO 60 E RO 70 E RO 80 E RO 90 E RO 100 E RO 110 E RO 125 E RO 150 E Brushed stainless steel 304 (1.4301 = V2A) (EB) RO 60 EB RO 70 EB RO 80 EB RO 90 EB RO 100 EB RO 110 EB RO 125 EB RO 150 EB Outside corner 90°, end cap Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) EV/RO 45 E - EV/RO 60 E EV/RO 60 EB EV/RO 70 E EV/RO 70 EB EV/RO 80 E EV/RO 80 EB EV/RO 90 E EV/RO 90 EB EV/RO 100 E EV/RO 100 EB EV/RO 110 E EV/RO 110 EB EV/RO 125 E EV/RO 125 EB EV/RO 150 E EV/RO 150 EB H = mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Outside corner Sink corner with 3/8" (10 mm) radius Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) I2S/RO 80 E/V2A I2S/RO 80 EB/V2A I2S/RO 100 E/V2A I2S/RO 100 EB/V2A I2S/RO 125 E/V2A I2S/RO 125 EB/V2A H = mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Sink corner with 3/8" (10 mm) radius H = mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 Connector Connector for stainess steel profiles V/RO 60 E V/RO 80 E V/RO 100 E V/RO 110 E V/RO 125 E H = mm - in. Inside corner 90° Aluminum with stainess steel appearance 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 H = mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 ID/RO 60 E ID/RO 80 E ID/RO 100 E ID/RO 125 E End cap Brushed stainless steel 304 (1.4301 = V2A) (EB) EK/RO 80EB EK/RO 100EB EK/RO 125EB Sink corner with 1-1/2" (38 mm) radius Stainless steel 304 (1.4301 = V2A) (E) ISK/RO 80 E/38 ISK/RO 100 E/38 ISK/RO 125 E/38 End cap Inside corner Sink corner with 1-1/2" (38 mm) radius Aluminum Aluminum = H 11 2.1 Schluter®-RONDEC H = mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 Satin anodized aluminum (AE) RO 60 AE RO 80 AE RO 100 AE RO 125 AE Polished chrome anodized aluminum (ACG) RO 60 ACG RO 80 ACG RO 100 ACG RO 125 ACG Item No. Brushed chrome anodized aluminum (ACGB) Satin nickel anodized aluminum (AT) RO 60 ACGB RO 60 AT RO 80 ACGB RO 80 AT RO 100 ACGB RO 100 AT RO 125 ACGB RO 125 AT Polished nickel anodized aluminum (ATG) RO 60 ATG RO 80 ATG RO 100 ATG RO 125 ATG Brushed nickel anodized aluminum (ATGB) RO 60 ATGB RO 80 ATGB RO 100 ATGB RO 125 ATGB WALL AND COUNTERTOP PROFILES 2.1 Schluter®-RONDEC H = mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 Satin copper anodized aluminum (AK) RO 60 AK RO 80 AK RO 100 AK RO 125 AK Polished copper anodized aluminum (AKG) RO 60 AKG RO 80 AKG RO 100 AKG RO 125 AKG Item No. Brushed copper anodized aluminum (AKGB) Brushed antique bronze anodized aluminum (ABGB) RO 60 AKGB RO 60 ABGB RO 80 AKGB RO 80 ABGB RO 100 AKGB RO 100 ABGB RO 125 AKGB RO 125 ABGB Satin brass anodized aluminum (AM) RO 60 AM RO 80 AM RO 100 AM RO 125 AM Polished brass anodized aluminum (AMG) RO 60 AMG RO 80 AMG RO 100 AMG RO 125 AMG H = mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 Brushed brass anodized aluminum (AMGB) RO 60 AMGB RO 80 AMGB RO 100 AMGB RO 125 AMGB Item No. Graphite anodized aluminum (AGR) Bright black anodized aluminum (AGSG) RO 60 AGR RO 60 AGSG RO 80 AGR RO 80 AGSG RO 100 AGR RO 100 AGSG RO 125 AGR RO 125 AGSG Brushed black anodized aluminum (AGSB) RO 60 AGSB RO 80 AGSB RO 100 AGSB RO 125 AGSB H = mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 Connector for aluminum profiles V/RO 60 V/RO 80 V/RO 100 V/RO 125 Connector Note: Connectors are made of PVC for aluminum profiles. Accessories Outside corner, end cap Inside corner Double-leg, outside corner Double-leg, inside corner Sink corner with 3/8" (10 mm) radius Item No. EV/ profile item number* IV/ profile item number* E2L/ profile item number* I2L/ profile item number* I2S/ profile item number* How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., EV/ RO 60 AM). (E2L) Outside Corner Inside Corner Sink corner with 3/8" (10 mm) radius Note: Sink corners with 3/8" (10 mm) radius are only available in AE, ACGB, AT, ATGB, AK, AKGB, ABGB, AM, and AMGB for sizes 80, 100 and 125 only. (I2L) Note : Inside/outside double-leg corners (E2L and I2L) and sink corners with 3/8" (10 mm) radius are available in 80, 100 and 125 only. They are not available in textured color-coated aluminum finishes. 2.1 Schluter®-RONDEC Length = 3.05 m - 10' Item No. H = mm - in. Satin anodized aluminum (AE) Polished chrome anodized aluminum (ACG) 8 - 5/16 10 - 3/8 12.5 - 1/2 RO 80 AE/300 RO 100 AE/300 RO 125 AE/300 RO 80 ACG/300 RO 100 ACG/300 RO 125 ACG/300 Satin nickel anodized aluminum (AT) RO 80 AT/300 RO 100 AT/300 RO 125 AT/300 12 WALL AND COUNTERTOP PROFILES Brass Brass = H 2.1 Schluter®-RONDEC Item No. H = mm - in. Chrome-plated solid brass 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 Outside Corner (MC) RO 60 MC RO 80 MC RO 100 MC RO 125 MC H = mm - in. Polished chrome anodized aluminum (ACG) Outside corner Inside corner 6 - 1/4 8 - 5/16 10 - 3/8 12.5 - 1/2 EV/RO 60 ACG EV/RO 80 ACG EV/RO 100 ACG EV/RO 125 ACG IV/RO 60 ACG IV/RO 80 ACG IV/RO 100 ACG IV/RO 125 ACG Note: Inside and outside corners for the chrome-plated brass (MC) are made of aluminum with a polished chrome finish (ACG). Inside Corner Color-coated aluminum, PVC 2.1 Schluter®-RONDEC Item No. H = mm - in. Textured color-coated aluminum Aluminum (TS) 6 - 1/4 RO 60 color* = H 8 - 5/16 RO 80 color* 10 - 3/8 RO 100 color* 11 - 7/16 RO 110 color* 12.5 - 1/2 RO 125 color* Length supplied: 8' 2-1/2" -- 2.5 m Aluminum Accessories Outside corner, 90° Inside corner, 90° Connector Item No. Textured color-coated aluminum (TS) EV/ profile item number* IV/ profile item number* V/ profile item number* *Color Codes TSR Rustic brown TSBG Greige TSDA Dark anthracite TSI Ivory TSLA Light anthracite TSB Beige TSSG Stone grey TSOB Bronze MGS MBW Matte black Matte white * To complete the item number, add the color code (e.g., RO 60 TSC). TSC Cream TSG Pewter 2.1 Schluter®-RONDEC *Color Codes = H Item No. H = Color-coated PVC mm - in. aluminum (AC) (P) PVC 6 - 1/4 RO 60 color* PRO 60 color* 8 - 5/16 RO 80 color* PRO 80 color* BW Bright white HB Light beige GM Metallic grey W White HG Light grey SB Black brown SP Sand pebble PG Classic grey GS Black BH Bahama G Grey = H 10 - 3/8 RO 100 color* PRO 100 color* To complete the item number, add the color code 11 - 7/16 - PRO 110 color* (e.g., RO 100 BW or PRO 80 G). 12.5 - 1/2 RO 125 color* PRO 125 color* Length supplied: 8' 2-1/2" -- 2.5 m Accessories Outside corner, end cap Color-coated aluminum (AC) Item No. PVC (P) ED/ profile item number* E/ profile item number* How to order corners: * To complete the item number for corners, add the corresponding profile item number (e.g., ED/ RO 60 BW). Inside corner Connector ID/ profile item number* V/ profile item number* I/ profile item number* - 13 = H = H 2.14 Schluter®-DECO-DE Item No. H = mm - in. Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) 8 - 5/16 DE 80 ES DE 80 EBS 10 - 3/8 DE 100 ES DE 100 EBS 11 - 7/16 DE 110 ES DE 110 EBS 12.5 - 1/2 DE 125 ES DE 125 EBS Length supplied: 8' 2-1/2" -- 2.5 m Aluminum = H =W 1.9 Schluter®-DECO-SG Item No. H = mm - in. Satin anodized aluminum (AE) Bright chrome anodized aluminum (ACB) W: 12.5 mm - 1/2" 8 - 5/16 SG 80 AE 12 SG 80 ACB 12 10 - 3/8 SG 100 AE 12 SG 100 ACB 12 11 - 7/16 SG 110 AE 12 SG 110 ACB 12 Le1n2g.5th-s1u/p2plied: 8' S2-G1/122" 5--A2E.51m2 SG 125 ACB 12 H = mm - in. Satin anodized aluminum (AE) W: 15 mm - 9/16" 8 - 5/16 SG 80 AE 15 10 - 3/8 SG 100 AE 15 11 - 7/16 SG 110 AE 15 12.5 - 1/2 SG 125 AE 15 Item No. Bright chrome anodized aluminum (ACB) SG 80 ACB 15 SG 100 ACB 15 SG 110 ACB 15 SG 125 ACB 15 Stainless Steel Stainless steel = H =W 1.9 Schluter®-DECO-SG Item No. H = mm - in. Brushed Stainless Steel (EB) W: 12.5 mm - 1/2" 8 - 5/16 SG 80 EB 12 10 - 3/8 SG 100 EB 12 11 - 7/16 SG 110 EB 12 Le1n2g.5th-s1u/p2plied: 8' S2-G1/122" 5--E2B.51m2 H = mm - in. Item No. Brushed Stainless Steel (EB) W: 15 mm - 9/16" 8 - 5/16 SG 80 EB 15 10 - 3/8 SG 100 EB 15 11 - 7/16 SG 110 EB 15 12.5 - 1/2 SG 125 EB 15 14 WALL AND COUNTERTOP PROFILES WALL AND COUNTERTOP PROFILES 37 mm - 1-15/32" r = 8 mm 5/16" 37 mm - 1-15/32" = H 90º 135º = H 2.6 Schluter®-ECK-E Item No. W = mm - in. Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) 90º Angle Length supplied: 4' 11" -- 1.50 m 6 - 1/4 E37 V2A 60/150 E37 V2A EB 60/150 8 - 5/16 E37 V2A 80/150 E37 V2A EB 80/150 11 - 7/16 E37 V2A 110/150 E37 V2A EB 110/150 Length supplied: 6' 7" -- 2.00 m 6 - 1/4 E37 V2A 60/200 E37 V2A EB 60/200 8 - 5/16 E37 V2A 80/200 E37 V2A EB 80/200 11 - 7/16 E37 V2A 110/200 E37 V2A EB 110/200 Length supplied: 8' 2-1/2" -- 2.50 m 6 - 1/4 E37 V2A 60/250 E37 V2A EB 60/250 8 - 5/16 E37 V2A 80/250 E37 V2A EB 80/250 11 - 7/16 E37 V2A 110/250 E37 V2A EB 110/250 Length supplied: 9' 10" -- 3.00 m 6 - 1/4 E37 V2A 60/300 E37 V2A EB 60/300 8 - 5/16 E37 V2A 80/300 E37 V2A EB 80/300 11 - 7/16 E37 V2A 110/300 E37 V2A EB 110/300 = W = W r = 3 mm 1/8" 90º 135º 2.7 Schluter®-ECK-K W = mm - in. Stainless steel 304 (1.4301 = V2A) (E) 90º Angle Length supplied: 4' 11" -- 1.50 m 15 - 9/16 K15 V2A/150 32 - 1-9/32 K32 V2A/150 50 - 2 K50 V2A/150 Length supplied: 6' 7" -- 2.00 m 32 - 1-9/32 K32 V2A/200 50 - 2 K50 V2A/200 Length supplied: 8' 2-1/2" -- 2.50 m 15 - 9/16 K15 V2A/250 32 - 1-9/32 K32 V2A/250 50 - 2 K50 V2A/250 Length supplied: 9' 10" -- 3.00 m 15 - 9/16 K15 V2A/300 32 - 1-9/32 K32 V2A/300 50 - 2 K50 V2A/300 Item No. Brushed stainless steel 304 (1.4301 = V2A) (EB) K15 V2A EB/150 K32 V2A EB/150 K50 V2A EB/150 K32 V2A EB/200 K50 V2A EB/200 K15 V2A EB/250 K32 V2A EB/250 K50 V2A EB/250 K15 V2A EB/300 K32 V2A EB/300 K50 V2A EB/300 W = 9/16" - 15 mm r = 1/32" 1 mm 15 2.7 Schluter®-ECK-KI W = mm - in. Stainless steel 304 (1.4301 = V2A) (E) Length supplied: 4' 11" -- 1.50 m 15 - 9/16 KI15 E/150 Length supplied: 6' 7" -- 2.00 m 15 - 9/16 KI15 E/200 Length supplied: 8' 2-1/2" -- 2.50 m 15 - 9/16 KI15 E Length supplied: 9' 10" -- 3.00 m 15 - 9/16 KI15 E/300 Item No. Brushed stainless steel 304 (1.4301 = V2A) (EB) KI15 EB/150 KI15 EB/200 KI15 EB KI15 EB/300 2.6 Schluter®-ECK-E Item No. W = mm - in. Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) 135º Angle Length supplied: 8' 2-1/2" -- 2.50 m 6 - 1/4 E37 E 60S E37 EB 60S 8 - 5/16 E37 E 80S E37 EB 80S 11 - 7/16 E37 E 110S E37 EB 110S Length supplied: 9' 10" -- 3.00 m 6 - 1/4 E37 E 60S/300 E37 EB 60S/300 8 - 5/16 E37 E 80S/300 E37 EB 80S/300 11 - 7/16 E37 E 110S/300 E37 EB 110S/300 Note: ECK-E is also available in stainless steel 316L (1.4404 = V4A). Contact Customer Service for price and availability. 2.7 Schluter®-ECK-K Item No. W = mm - in. Stainless steel 304 (1.4301 = V2A) (E) 135º Angle Length supplied: 4' 11" -- 1.50 m 32 - 1-9/32 K32 ES/150 Length supplied: 8' 2-1/2" -- 2.50 m 32 - 1-9/32 K32 ES Length supplied: 9' 10" -- 3.00 m 32 - 1-9/32 K32 ES/300 Note: ECK-K is also available in stainless steel 316L (1.4404 = V4A). Contact Customer Service for price and availability. W = 9/16" - 15 mm r = 11/32" 9 mm 2.7 Schluter®-ECK-KHK W = mm - in. Stainless steel 304 (1.4301 = V2A) (E) Length supplied: 4' 11" -- 1.50 m 15 - 9/16 KHK15 E/150 Length supplied: 6' 7" -- 2.00 m 15 - 9/16 KHK15 E/200 Length supplied: 8' 2-1/2" -- 2.50 m 15 - 9/16 KHK15 E Length supplied: 9' 10" -- 3.00 m 15 - 9/16 KHK15 E/300 Item No. Brushed stainless steel 304 (1.4301 = V2A) (EB) KHK15 EB/150 KHK15 EB/200 KHK15 EB KHK15 EB/300 WALL AND COUNTERTOP PROFILES Accessories Item No. Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) Outside corner, 90º Inside corner, 90º (2-way) Inside corner, 90º (3-way) Connector E/KHK 15 E I/2KHK 15 E I/3KHK 15 E V/KHK 15 E E/KHK 15 EB I/2KHK 15 EB I/3KHK 15 EB V/KHK 15 EB Inside corner, 2-way Inside corner, 3-way = H 5/16" 7/32" 8 mm 5 mm 2.5 Schluter®-RONDEC-DB Item No. H = mm - in. Satin anodized aluminum (AE) Satin copper anodized aluminum (AK) 14 - 17/32 DB 14 AE DB 14 AK Length supplied: 8' 2-1/2" -- 2.5 m Satin brass anodized aluminum (AM) DB 14 AM Accessories Outside corner, 90º Item No. Satin anodized aluminum (AE) EV/DB 14 AE 2.5 Schluter®-RONDEC-DB Length = 3.05 m - 10' Item No. H = mm - in. Satin anodized aluminum (AE) 14 - 17/32 DB 14 AE/300 Aluminum 1" - 25 mm 2.2 Schluter®-DESIGNLINE H = mm - in. 6 - 1/4 Stainless steel 304 (1.4301 = V2A) (E) DL 625 E Brushed stainless steel 304 (1.4301 = V2A) (EB) DL 625 EB Item No. Stainless steel 304 (1.4301 = V2A) square check Stainless steel 304 (1.4301 = V2A) leather texture (ES1) DL 625 ES1 (ES2) DL 625 ES2 Chromeplated solid brass (MC DL 625 MC 1/4" 6 mm Stainless steel, Brass 1" - 25 mm 1/4" 6 mm H = mm - in. 6 - 1/4 Polished chrome anodized aluminum (ACG) DL 625 ACG H = mm - in. 6 - 1/4 Polished copper anodized aluminum (AKG) DL 625 AKG Brushed chrome anodized aluminum (ACGB) DL 625 ACGB Satin nickel anodized aluminum (AT) DL 625 AT Item No. Polished nickel anodized aluminum (ATG) DL 625 ATG Brushed nickel anodized aluminum (ATGB) DL 625 ATGB Brushed copper anodized aluminum (AKGB) DL 625 AKGB Item No. Satin brass anodized aluminum (AM) DL 625 AM Polished brass anodized aluminum (AMG) DL 625 AMG Length supplied: 8' 2-1/2" -- 2.5 m Satin anodized aluminum (AE) DL 625 AE Satin copper anodized aluminum (AK) DL 625 AK Brushed brass anodized aluminum (AMGB) DL 625 AMGB Note: All corresponding item numbers of the RONDEC finishes match DESIGNLINE. 16 WALL AND COUNTERTOP PROFILES 2" - 50 mm = H 2-7/8" - 72 mm 2.11 Schluter®-QUADEC-FS Item No. H = mm - in. Satin anodized aluminum (AE) Polished chrome anodized aluminum (ACG) Satin nickel anodized aluminum (AT) 8 - 5/16 QF8/50 AE QF8/50 ACG QF8/50 AT Length supplied: 8' 2-1/2" -- 2.50 m Brushed antique bronze anodized aluminum (ABGB) QF8/50 ABGB Accessories End cap, outside/inside corner Item No. EV/profile item number* Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap. How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., EV/QF8/50 AE). Inside/outside corner/ End cap = H A = 1-1/2" - 39 mm or 2-1/4" - 57 mm 2.8 Schluter®-RONDEC-STEP H = mm - in. Satin anodized aluminum (AE) A: 39 mm - 1-1/2" 8 - 5/16 RS 80 AE 39 10 - 3/8 RS 100 AE 39 12.5 - 1/2 RS 125 AE 39 A: 57 mm - 2-1/4" 8 - 5/16 RS 80 AE 57 10 - 3/8 RS 100 AE 57 12.5 - 1/2 RS 125 AE 57 Brushed chrome anodized aluminum (ACGB) RS 80 ACGB 39 RS 100 ACGB 39 RS 125 ACGB 39 RS 80 ACGB 57 RS 100 ACGB 57 RS 125 ACGB 57 Satin nickel anodized aluminum (AT) Item No. Brushed nickel anodized aluminum (ATGB) RS 80 AT 39 RS 100 AT 39 RS 125 AT 39 RS 80 ATGB 39 RS 100 ATGB 39 RS 125 ATGB 39 RS 80 AT 57 - RS 100 AT 57 - RS 125 AT 57 - Satin copper anodized aluminum (AK) RS 80 AK 39 RS 100 AK 39 RS 125 AK 39 RS 80 AK 57 RS 100 AK 57 RS 125 AK 57 H = mm - in. Satin brass anodized aluminum (AM) A: 39 mm - 1-1/2" 8 - 5/16 - 10 - 3/8 - 12.5 - 1/2 - A: 57 mm - 2-1/4" 8 - 5/16 RS 80 AM 57 10 - 3/8 RS 100 AM 57 12.5 - 1/2 RS 125 AM 57 Item No. Brushed brass anodized aluminum (AMGB) Brushed antique bronze anodized aluminum (ABGB) RS 80 AMGB 39 RS 80 ABGB 39 RS 100 AMGB 39 RS 100 ABGB 39 RS 125 AMGB 39 RS 125 ABGB 39 RS 80 AMGB 57 RS 100 AMGB 57 RS 125 AMGB 57 - Length supplied: 8' 2-1/2" -- 2.50 m Accessories Outside corner, 90º Outside corner, 135º Inside corner, 90º Inside corner, 135º Item No. E 90 profile item number* E 135 profile item number* I 90 profile item number* I 135 profile item number* Outside Corner Inside Corner Brushed copper anodized aluminum (AKGB) RS 80 AKGB 39 RS 100 AKGB 39 RS 125 AKGB 39 RS 80 AKGB 57 RS 100 AKGB 57 RS 125 AKGB 57 How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., E 90 RS 80 ACGB 39). 17 WALL AND COUNTERTOP PROFILES 1-1/4" - 32 mm = H = H A = 1-1/2" 39 mm 2.9 Schluter®-RONDEC-CT H = mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Satin anodized aluminum (AE) RC 80 AE 39 RC 100 AE 39 RC 125 AE 39 Brushed chrome anodized aluminum (ACGB) RC 80 ACGB 39 RC 100 ACGB 39 RC 125 ACGB 39 Item No. Satin nickel anodized aluminum (AT) Brushed nickel anodized aluminum (ATGB) RC 80 AT 39 RC 80 ATGB 39 RC 100 AT 39 RC 100 ATGB 39 RC 125 AT 39 RC 125 ATGB 39 Satin copper anodized aluminum (AK) RC 80 AK 39 RC 100 AK 39 RC 125 AK 39 H = mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Satin brass anodized aluminum (AM) RC 80 AM 39 RC 100 AM 39 RC 125 AM 39 Item No. Brushed brass anodized aluminum (AMGB) Textured color-coated aluminum (TSB) RC 80 AMGB 39 RC 80 TSB 39 RC 100 AMGB 39 RC 100 TSB 39 RC 125 AMGB 39 RC 125 TSB 39 Textured color-coated aluminum Textured color-coated aluminum (TSOB) RC 80 TSOB 39 RC 100 TSOB 39 RC 125 TSOB 39 (TSG) RC 80 TSG 39 RC 100 TSG 39 RC 125 TSG 39 Brushed copper anodized aluminum (AKGB) RC 80 AKGB 39 RC 100 AKGB 39 RC 125 AKGB 39 Accessories Outside corner, 90º Outside corner, 135º Inside corner, 90º Inside corner, 135º Item No. E 90 profile item number* E 135 profile item number* I 90 profile item number* I 135 profile item number* Outside Corner Inside Corner How to order corners: *To complete the item number for corners, add the corresponding profile item number (e.g., E 90 RC 80 AK 39). = H A = 1-3/16" - 30 mm or 1-1/2" - 39 mm = H = 7/16 - 11 mm 18 2.8 Schluter®-SCHIENE-STEP Item No. H = mm - in. A: 39 mm - 1-1/2" 6 - 1/4 9 - 11/32 11 - 7/16 12.5 - 1/2 Profile SS 60 EB 39 SS 90 EB 39 SS 110 EB 39 SS 125 EB 39 Brushed Stainless Steel 304 (1.4301 = V2A) (EB) Inside corner, 90° Inside corner, 135° Outside corner, 90° and End Cap Outside corner, 135° I90 / SS 60 EB 39 I90 / SS 90 EB 39 I90 / SS 110 EB 39 I90 / SS 125 EB 39 I135 / SS 60 EB 39 I135 / SS 90 EB 39 I135 / SS 110 EB 39 I135 / SS 125 EB 39 E90 / SS 60 EB 39 E90 / SS 90 EB 39 E90 / SS 110 EB 39 E90 / SS 125 EB 39 E135 / SS 60 EB 39 E135 / SS 90 EB 39 E135 / SS 110 EB 39 E135 / SS 125 EB 39 A: 30 mm - 1-3/16" 9 - 11/32 SS 90 EB 30 - 11 - 7/16 SS 110 EB 30 - 12.5 - 1/2 SS 125 EB 30 - - E90 / SS 90 EB 30 - - E90 / SS 110 EB 30 - - E90 / SS 125 EB 30 - A: 11 mm - 7/16" 6 - 1/4 12.5 - 1/2 SS 60 EB 11 SS 125 EB 11 Length supplied: 8' 2-1/2" -- 2.50 m H = mm - in. Item No. Brushed Stainless Steel 304 (1.4301 = V2A) (EB) Connector A: 39 mm - 1-1/2" 6 - 1/4 9 - 11/32 11 - 7/16 12.5 - 1/2 A: 30 mm - 1-3/16" 9 - 11/32 11 - 7/16 12.5 - 1/2 A: 11 mm - 7/16" 6 - 1/4 12.5 - 1/2 V / SS 60 EB 39 V / SS 90 EB 39 V / SS 110 EB 39 V / SS 125 EB 39 V / SS 90 EB 30 V / SS 110 EB 30 V / SS 125 EB 30 V / SS 60 EB 11 V / SS 125 EB 11 Schluter® Systems Wall and Countertop Profiles 5-Year Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter® Systems Wall and Countertop Profiles 5-Year Limited Warranty (the "Limited Warranty"), Schluter Systems warrants that its Schluter®-JOLLY, Schluter®-SCHIENE, Schluter®-DESIGNBASE-SL, Schluter®-RONDEC-DB, Schluter®-QUADEC, Schluter®-QUADEC-K, Schluter®-DIADEC, Schluter®-DIADEC-K, Schluter®-QUADEC-FS, Schluter®-RONDEC, Schluter®-FINEC, Schluter®-DESIGNLINE, Schluter®-DECODE, Schluter®-ECK-E, Schluter®-RONDEC-STEP, Schluter®-DECO-SG, Schluter®-ECK-K, Schluter®-RONDEC-CT, Schluter®-INDEC, Schluter®-ECK-KI, Schluter®-ECK-KHK, Schluter®-SCHIENE-STEP, and Schluter®-REMA (collectively, the "Products") will be free from manufacturing defects and will perform as described in the Schluter Systems Wall and Countertop Profiles Technical Data Sheet (collectively, the "Written Materials"1) for a period of five (5) years from the date of purchase when installed and used in accordance with the terms and conditions of the Written Materials and industry standard guidelines that are not in conflict with the Written Materials in effect at the time of installation. For the purposes of this Limited Warranty, "Owner" is defined as the original end user of the property in which the Products are installed; and "Tile Assembly" is defined to include the Products, non-reusable tile surfaces, and applicable setting and grouting materials. This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any circumstances for determining the suitability of the Products for the Owner's intended purpose. It is the responsibility of the Owner to consult with an experienced and professional installer to ensure the suitability of the Products, subfloor/substrate and all building materials in the installation and that the Written Materials are followed properly. RESOLUTION: If the Products are installed and used in accordance with the terms and conditions as described hereinabove and such Products are proven defective within the applicable warranty term, the Owner's exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or replace the failed portion of the Tile Assembly or (b) pay an amount not to exceed the original square foot cost of the installation of the Tile Assembly verified to be defective. Due to conditions beyond the control of Schluter Systems (e.g., color and shade availability, discontinuation, normal wear and tear), Schluter Systems cannot guarantee or warrant an exact match to the specific tile, stone, or other flooring materials used in the original installation. In such event, substantially similar materials may be substituted. EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental, punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to the failure of the Products or Tile Assembly, regardless of any strict liability or active or passive negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty further excludes any loss or damage arising out of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply with the Written Materials, inadequate subfloor/substrate, improper preparation or other failure of subfloor/substrate, faulty or negligent penetration of the Products or subfloor/substrate, intentional acts of destruction, structural failure, misuse of or failure to maintain the Products, normal wear and tear, scratches, dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning products, abrasive agents or otherwise), efflorescence and shading which are a natural occurrence with cementitious materials and are not considered a defective condition for the purposes of this Limited Warranty, variations of texture, color or shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated to the Products (e.g. tile covering failure, excess point loading, overvoltage). This Limited Warranty excludes exterior applications and applications utilizing glass tile or other non-approved tile surfaces, unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services Director. This Limited Warranty is conditioned and will be considered null and void and Schluter Systems will have the right to refuse any claims if: (a) the Products have been improperly stored or installed, or (b) the Products are subject to abusive or abnormal use, lack of maintenance, or used in a manner other than that for which the Products were designed or in any way contrary to the Written Materials. DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or conditions, expressed or implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE (as limited to such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law. ANY IMPLIED WARRANTIES ARISING BY OPERATION OF LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION, PROMISE, AFFIRMATION OR STATEMENT BY ANY EMPLOYEE OR AGENT OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS UNLESS IT IS SPECIFICALLY INCLUDED IN THIS LIMITED WARRANTY OR AUTHORIZED IN WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether expressed or implied. The remedies contained herein are the only remedies available for breach of this Limited Warranty. This Limited Warranty extends only to the Owner and is not transferable or assignable unless authorized by written agreement and signed by the Schluter Systems Technical Services Director or otherwise prohibited by specific state or provincial law. This Limited Warranty gives you specific legal rights; some states and provinces do not allow disclaimers or other restrictions of implied warranties; some of the above disclaimers may not apply to you. No changes or modifications of any terms or conditions of this Limited Warranty are permitted unless duly authorized in writing by the Schluter Systems Technical Services Director. This Limited Warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems relative to the Products or the application of the Products and shall apply to any installation occurring on or after April 8, 2019. If the Products are used in conjunction with other Schluter products, a different Schluter warranty may apply. For the most current information and materials regarding Schluter Systems warranties and programs, please visit https://www.schluter.com/schluter-us/en_US/downloadfiles. MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems2 with written notice within thirty (30) days of any alleged defect in the Products covered by this Limited Warranty, together with date and proof of purchase of such Products and/or all of its components and name and address of all installers and all invoices related to the original installation, failing which this Limited Warranty shall have no legal effect3. Schluter Systems reserves the right at its election and as a condition of this Limited Warranty to inspect the alleged failed and/or defective Products. All U.S. Claims shall be sent to: All Canadian Claims shall be sent to: Schluter Systems L.P. Attn: Warranty Claims Dept. 194 Pleasant Ridge Road Plattsburgh, NY 12901-5841 Schluter Systems (Canada), Inc. Attn: Warranty Claims Dept. 21100 chemin Ste-Marie Ste-Anne-de-Bellevue, QC H9X 3Y8 1 If there are any conflicting terms between any Written Materials, the most recently updated document shall be deemed to control. 2 This Limited Warranty is limited to sales of the Products made in and intended for use in the United States and Canada. For the purposes of this Limited Warranty, Schluter Systems L.P. shall offer warranty coverage to Owners located in the United States, and Schluter Systems (Canada) Inc. shall offer warranty coverage to Owners located in Canada. 3 In the event that Owner fails to provide such required invoices relating to the original installation, Schluter Systems shall pay Owner an amount equal to the average, reasonable costs of a comparable installation. If the parties fail to agree on such amount, such dispute shall promptly, and in the first instance, be submitted: (a) if a U.S. claim, to arbitration in Clinton County, New York, in accordance with the rules of the American Arbitration Association, or (b) if a Canadian claim, in the Province of Quebec, Canada, in accordance with the ADRIC Arbitration Rules. Any outcome of such arbitration proceeding shall be final and binding upon the parties hereto. 05/2019 © 2019 Schluter Systems L.P. Schluter Systems L.P. · 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 · Tel.: 800-472-4588 · Fax: 800-477-9783 Schluter Systems (Canada) Inc. · 21100 chemin Ste-Marie, Ste-Anne-de-Bellevue, QC H9X 3Y8 · Tel.: 800-667-8746 · Fax: 877-667-2410 www.schluter.com This technical data sheet is subject to change without notice. Please visit www.schluter.com for the latest version. 553099Adobe PDF Library 15.0 Adobe InDesign 14.0 (Macintosh)