Revised - 05/20/2021 Toll Free: 1-800-465-0234 Fax: 905-607-0234 Email: service@omcan.com www.omcan.com Refrigerated Showcases Models RS-CN-0120-B, 0200-B, 0120-S, 0200-S
www.omcan.com. Refrigerated Showcases. Models RS-CN-0120-B, 0200-B, 0120-S, 0200-S. Items 50077, 50078, 50079, 50080. Instruction Manual ...
Refrigerated Showcases Models RS-CN-0120-B, 0200-B, 0120-S, 0200-S Items 50077, 50078, 50079, 50080 Instruction Manual Revised - 05/20/2021 Toll Free: 1-800-465-0234 Fax: 905-607-0234 Email: service@omcan.com www.omcan.com Table of Contents Model RS-CN-0120-B / Model RS-CN-0200-B Model RS-CN-0120-S / Model RS-CN-0200-S Section Page Disclaimer -------------------------------------------------------------------------------------------- 3 General Information --------------------------------------------------------------------------- 4 - 5 Safety and Warranty --------------------------------------------------------------------------- 5 - 6 Technical Specifications -------------------------------------------------------------------------- 7 Installation and Operation -------------------------------------------------------------------- 7 - 8 Maintenance ----------------------------------------------------------------------------------- 8 - 10 Troubleshooting ----------------------------------------------------------------------------- 10 - 11 Parts Breakdown ---------------------------------------------------------------------------- 12 - 17 Electrical Schematics ---------------------------------------------------------------------------- 18 Warranty Registration ---------------------------------------------------------------------------- 19 2 Disclaimer OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN. 3 General Information Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person's improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation. CHECK PACKAGE UPON ARRIVAL Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party. Before operating any equipment, always read and familiarize yourself with all operation and safety instructions. Omcan would like to thank you for purchasing this machine. It's of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required. --------------------------------------------------------------------------------------------------------------------------------------------------Omcan Fabrication et distribution Companie Limité et Food Machinery d'Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu'un de plus de 18 ans, saine d'esprit, et pas sous l'influence d'une drogue ou d'acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modification de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement. VÉRIFIEZ LE COLIS DÈS RÉCEPTION Dès réception d'une expédition d'Omcan veuillez inspecter pour dommages externes. Si aucun dommage n'est visible sur l'emballage externe, ouvrez le carton afin de s'assurer que tous les éléments commandés sont dans la boîte, et il n'y a aucun dommage dissimulé à la machine. Si le colis n'a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant d'accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager une réclamation auprès du transporteur. Un rapport détaillé sur l'étendue des dommages causés à la machine doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d'expédition. Omcan n'a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli par un tiers transporteur. 4 General Information Avant d'utiliser n'importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité. Omcan voudrais vous remercier d'avoir choisi cette machine. Il est primordial de conserver ces instructions pour une référence ultérieure. Également conservez la boîte originale et l'emballage pour l'expédition de l'équipement si l'entretien ou le retour de la machine est nécessaire. --------------------------------------------------------------------------------------------------------------------------------------------------Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona mayor de 18 años, en su sano juicio y no bajo alguna influencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modificación a la máquina anúla la garantía y puede causar daños a las personas usando la máquina mientras esta en el funcionamiento. REVISE EL PAQUETE A SU LLEGADA Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron a recoger por terceros. Antes de utilizar cualquier equipo, siempre leer y familiarizarse con todas las instrucciones de operación y seguridad. Omcan quisiera darles las gracias por la compra de esta máquina. Es de la máxima importancia para guardar estas instrucciones para referencias en el futuro. También guarde la caja original y el embalaje para envío del equipo si el mantenimiento o la devolución de la máquina es necesaria. Safety and Warranty WHEN USING ELECTRICAL APPLIANCES BASIC SAFETY PRECAUTIONS SHOULD BE FOLLOWED: · This cooler must be properly installed and located in accordance with the installation service representative. · Do not allow children to climb, stand or hang on the shelves in the cooler. They could damage the unit and seriously injure themselves. · Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 5 Safety and Warranty · Unplug the unit from the electrical outlet before cleaning or making repairs. · Do not touch the cold surfaces in the refrigerator compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces. NOTE: It is strongly recommended that any servicing be performed by an authorized instructions before it is used. · When the refrigerator is installed or used,all the packaging (including cardboard and plastic wrap)should be removed. · Keep the refrigerator stable to avoid vibration and noise. · The refrigerator should be installed in a place with good ventilation and a space of at least 4" should be allowed between the surrounding walls and the cabinet wall for air circulation. · Unit should be placed far from any heating source to avoid decrease of refrigeration efficiency. · Install the refrigerator in a dry place to prevent rust from forming on the compartment body, which may affect the electrical insulation. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible. 1 YEAR PARTS AND LABOR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info. WARNING: The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! 6 Technical Specifications Model Type Temperature Range Max Ambient Temp Rating Power Electrical Current Capacity Refrigerant Dimensions Packaging Dimensions Weight Packaging Weight Item Number RS-CN-0120-B Black RS-CN-0120-S Stainless Steel RS-CN-0200-B Black 0 - 6ºC / 32 - 43ºF RS-CN-0200-S Stainless Steel 32ºC / 90ºF 1/4+ HP 3/4 HP 115V / 60Hz / 1 2.6A 5.9A 508 L / 18 cu.ft. 903 L / 32 cu.ft. R290 47" x 32.5" x 43" / 1200 x 825 x 1089mm 82" x 32.5" x 43" / 2082 x 825 x 1089mm 52" x 37" x 49" / 1320 x 940 x 1240mm 86.8" x 37" x 49" / 2202 x 940 x 1240mm 319 lbs. / 145 kgs. 429 lbs. / 195 kgs. 50077 50079 506 lbs. / 230 kgs. 638 lbs. / 290 kgs. 50078 50080 Installation and Operation To ensure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your equipment. · Remove the outer packaging, Inspect for concealed damage. Again, immediately file a claim with the freight carrier if there is damage. · Remove the wood frame and pallet. · Place the refrigerator on a flat surface and remove to the final location. Be sure there is adequate ventilation in your room. Under extreme heat conditions, (100°F+, 38°C+), you may want to install an exhaust fan. ELECTRICAL Do not under any circumstances cut or remove the grounding prong from the power cord. For safety this appliance must be properly grounded at all times. · The power cord of this cooler is equipped with a grounding plug which mates with a standard grounding wall outlet to minimize the possibility of electric shock hazard. · If the outlet is a standard 2-prong outlet, it must be replaced with the properly grounded wall outlet. NEVER USE AN ADAPTER PLUG! · Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Check the incoming voltage with a voltmeter. 7 Installation and Operation · DO NOT USE EXTENSION CORDS. The use of extension cords to connect the cooler will void warranty. The unit must be close enough to the electrical supply so that extension cords are never used. · The cooler should always be plugged into its own dedicated circuit with a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading wiring circuits which could become a fire hazard from overheated wires. · Never unplug your cooler by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. · Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a power cord that has cracks or abrasion damage along its length or at either of its ends. · When removing the cooler away from the wall be careful not to run over or damage the power cord. NOTE: Wiring diagram can be referenced by removing the front louvered grill, and looking on the inside cabinet wall. PLUG IN THE COOLER AND THE COMPRESSOR IS READY TO OPERATE. · Excessive tampering with the control could lead to service difficulties. Should it ever become necessary to replace the temperature control it should be ordered from your dealer or recommended service agent. LIGHT SWITCH LOCATION: The light switch is located at the left side of rear grille. NOTE: If the unit is disconnected or shut off, wait five (5) minutes before re-starting unit. RECOMMENDATION: Before loading product the unit should be run for 2 to 3 hours. This allows confirmation that the electrical wiring and installation are correct and no shipping damage has occurred. Maintenance Condensers accumulate dirt and dust and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales -- which are not covered by warranty. Air is pulled through the condenser continuously along with dust, lint, grease, etc. If you keep the condenser clean you will minimize your service expense and lower your electrical costs. The condenser requires scheduled cleaning every days or as needed. A dirty condenser can result in non-warranted part and compressor failures and product loss. Proper cleaning involves removing debris from the condenser by using a soft brush or vacuuming the condenser with a shop vacuum or using CO2, nitrogen or pressurized air. If you cannot remove the debris adequately please call you refrigeration service company. 8 Maintenance CLEANING THE CONDENSER COIL REQUIRED TOOLS · Phillips screwdriver. · Stiff bristle brush. · Adjustable wrench. WHEN USING ELECTRICAL APPLIANCES BASIC SAFETY PRECAUTIONS SHOULD BE FOLLOWED. · Disconnect power to unit. · Take off front grill assembly by removing all screws. · Remove bolts anchoring compressor assembly to frame rails and carefully slide out --tube connections are flexible. · Clean off accumulated dirt from condensing coil with the stiff bristle brush. · Lift cardboard cover above fan at plastic plugs and carefully clean condenser coil and fan blades. · After brushing condenser coil, vacuum dirt from coil and interior floor. · Replace cardboard cover, carefully slide compressor assembly back into position and replace bolts. · Reinstall front grille assembly onto unit with appropriate fasteners and clips. Tighten all screws. · Connect unit to power and check to see if condenser is running. STAINLESS STEEL CARE AND CLEANING RECOMMENDED CLEANERS FOR STAINLESS STEEL · Soap, ammonia and detergent medallion applied with a soft cloth or sponge for routine cleaning. · Arcal 20, Loc-O-Nu Eco shine provide a barrier film for fingerprints and smears. · Cameo,Talc,Z ud First Impression is for stubborn stains and discoloration. Rub in direction of polish lines. · Easy-off and De-Grease It oven aid are excellent for removals on all finishes for grease-fatty acids,blood and burnt-on foods. · Any good commercial detergent can be applied with a sponge or soft cloth to remove grease and oil. · Benefit,Super Sheen,Sheila Shine are good for restoration/passiveness. CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces. STAINLESS STEEL ENEMIES There are three basic items that can break down stainless steel's passivity layer and allow corrosion to occur. · Scratches from wire brushes, metal scrapers and steel pads are just a few examples of items that can be abrasive to stainless steel's surface. · Deposits left on stainless steel can leave spots. Hard water can leave spots. Hard water that is heated can leave deposits if left to sit for too long. These deposits can cause the passive layer to break down and rust stainless steel. All deposits left from food prep or service should be removed as quickly as possible. · Chlorides are present in table salt, food and water. Household and industrial cleaners are the worst type of chlorides to use. 8 STEPS THAT CAN HELP PREVENT RUST ON STAINLESS STEEL · Use the correct cleaning tools. Use non-abrasive tools when cleaning your stainless steel products. The 9 Maintenance stainless steel's passive layer will not be harmed by soft cloths and plastic scouring pads. · Clean along the polish lines. Polish lines or grain are visible on some stainless steel. Always scrub parallel to visible lines. Use a plastic scouring pad or soft cloth when grain is not visible. · Use alkaline, alkaline chlorinated or non-chloride containing cleaners. While many traditional cleaners are loaded with chlorides, the industry is providing an ever increasing choice of non-chloride cleaners. If unsure of chloride content contact the cleaner supplier. If present cleaner contains chlorides, ask for an alternative. Avoid cleaners containing quaternary salts as they can attack stainless steel causing pitting and rusting. · Water treatment. To reduce deposits, use soft water whenever possible. Installation of certain filters can be an advantage. Contact a treatment specialist about proper water treatment. · Maintain cleanliness of food equipment. Use cleaners at recommended strength(alkaline, alkaline chlorinated or non-chloride). Avoid buildup of hard stains by cleaning frequently. · When using chlorinated cleaners you must rinse and wipe dry immediately. It is better to wipe standing cleaning agents and water as soon as possible. All stainless steel equipment to air dry. Oxygen helps maintain the passivity film on stainless steel. · Hydrochloric acid (muriatic acid) should never be used on stainless steel. · Regularly restore/passiveness stainless steel. Troubleshooting Before requesting any service on your unit, please check the following points. Please note that this guide serves only as a reference for solutions to common problems. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Compressor not running. Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker. Power cord unplugged. Plug in power cord. Thermostat set too high. Set thermostat to lower temperature. Cabinet in defrost cycle. Wait for defrost cycle to finish. 10 Troubleshooting Condensing unit runs for long periods of time. Cabinet temperature is too warm. Cabinet is noisy. Excessive amount of warn product Allow adequate time for product to placed in cabinet. cool down. Prolonged door opening or door ajar. Ensure doors are closed when not in use. Avoid opening doors for long periods of time. Door gasket(s) not sealing properly. Ensure gaskets are snapped in completely. Remove gasket and wash with soap and water. Check condition of gasket and replace if necessary. Dirty condenser coil. Clean the condenser coil. Evaporator coil iced over. Unplug unit and allow coil to defrost. Make sure thermostat is not set too cold. Ensure that door gasket(s) are sealing properly. Thermostat set too warm. Set thermostat to lower temperature. Blocking air flow. Re-arrange product to allow for proper air flow. Make sure there is at least four inches of clearance from evaporator. Excessive amount of warm product Allow adequate time for product to placed in cabinet. cool down. Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker. Dirty condenser coil. Clean the condenser coil. Prolonged door opening or door ajar. Ensure doors are closed when not in use. Avoid opening doors for long periods of time. Evaporator coil iced over. Unplug unit and allow coil to defrost. Make sure thermostat is not set too cold. Ensure that door gasket(s) are sealing properly. Loose part(s). Locate and tighten loose part(s). Tubing vibration. Ensure tubing is free from contact with other tubing or components. 11 Parts Breakdown Model RS-CN-0120-B 50077 Model RS-CN-0120-S 50079 12 Model RS-CN-0120-B 50077 Parts Breakdown Item No. Description Position AB607 Right Track of Installation Board for 50077 1 AB634 Installation Board of Compressor for 50077 2 AA248 Condenser Fan Blade for 50077 3 AA250 Condenser for 50077 4 26247 Caster without Brake for 50077 5 AB635 Support Board of Leveling Feet for 50077 6 AB973 Limited Block for Installation Board for 50077 7 AB637 Front Grill for 50077 8 AB638 Fixed Board of Curve Glass for 50077 9 AB639 Curve Glass for 50077 10 AG538 LED Light and Socket for 50077 11, 12 AG539 Bottom Shelf for 50077 13 AB641 Shelf Support Board Connector for 50077 14 AB642 Right Shelf Support Board for 50077 15 AG540 Middle Shelf for 50077 16 Item No. Description AB582 Thermostat for 50077 AA124 AA378 AA528 AA214 AA135 AE984 AB649 AB650 AB651 AB652 AB653 AA711 AB589 AB590 Power Switch for 50077 Temperature Probe Fixer for 50077 Drain Hose for 50077 Thermostat Water Proof Cover for 50077 Power Cord for 50077 Thermostat Installation Cover for 50077 Right Bracket for 50077 Middle Bracket for 50077 Air Pipe Protection Board for 50077 Left Bracket for 50077 Glass Door for 50077 LED Power Supply for 50077 Coiled Copper Pipe of Outer Drain Pan for 50077 Outer Drain Pan for 50077 Position 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 AB644 Left Shelf Support Board for 50077 17 AG542 Inner Drain Pipe for 50077 36 AB769 Right Hanger of Grill for 50077 18 AE876 Compressor for 50077 37 AB646 Grill Components for 50077 19 AB594 Filter for 50077 39 AG541 Evaporator for 50077 20 AB595 Filter Fixer for 50077 40 Item No. Description AA249 Condenser Fan Motor Cover for 50077 Position 41 AA984 AB657 AB658 AB659 AB660 AB661 AB662 AB663 AB772 AB604 AB665 AB666 AB667 AG543 AB084 26246 Condenser Fan Motor for 50077 42 Left Track of Installation Board for 50077 43 Cover Board of Machine Room for 50077 44 Support Holder of Cabinet for 50077 45 Cover Board of Machine Room for 50077 46 Cabinet for 50077 47 Back Grill for 50077 48 Framework of Door Track for 50077 49 Left Hanger of Grill for 50077 50 Sealing Rubber Strip for 50077 51 Baffle for Evaporator for 50077 52 Defrost Heater for 50077 53 Thermostat Mounting Plate for 50077 54 Upper Shelf for 50077 55 Evaporator Temperature Sensor for 50077 56 Caster with Brake for 50077 57 13 Parts Breakdown Model RS-CN-0120-S 50079 Item No. Description Position AB607 Right Track of Installation Board for 50079 1 AB634 Installation Board of Compressor for 50079 2 AA248 Condenser Fan Blade for 50079 3 AA250 Condenser for 50079 4 26247 Caster without Brake for 50079 5 AB635 Support Board of Leveling Feet for 50079 6 AB973 Limited Block for Installation Board for 50079 7 AB672 Front Grill for 50079 8 AB638 Fixed Board of Curve Glass for 50079 9 AB639 Curve Glass for 50079 10 AG538 LED Light and Socket for 50079 11, 12 AG539 Bottom Shelf for 50079 13 AB641 Shelf Support Board Connector for 50079 14 AB642 Right Shelf Support Board for 50079 15 AG540 Middle Shelf for 50079 16 Item No. Description AB582 Thermostat for 50079 AA124 AA378 AA528 AA214 AA135 AE984 AB649 AB650 AB651 AB652 AB653 AA711 AB589 AB590 Power Switch for 50079 Temperature Probe Fixer for 50079 Drain Hose for 50079 Thermostat Water Proof Cover for 50079 Power Cord for 50079 Thermostat Installation Cover for 50079 Right Bracket for 50079 Middle Bracket for 50079 Air Pipe Protection Board for 50079 Left Bracket for 50079 Glass Door for 50079 LED Power Supply for 50079 Coiled Copper Pipe of Outer Drain Pan for 50079 Outer Drain Pan for 50079 Position 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 AB644 Left Shelf Support Board for 50079 17 AG542 Inner Drain Pipe for 50079 36 AB769 Right Hanger of Grill for 50079 18 AE876 Compressor for 50079 37 AB646 Grill Components for 50079 19 AB594 Filter for 50079 39 AG541 Evaporator for 50079 20 AB595 Filter Fixer for 50079 40 Item No. Description AA249 Condenser Fan Motor Cover for 50079 Position 41 AA984 AB657 AB658 AB659 AB660 AB690 AB662 AB663 AB772 AB604 AB665 AB666 AB667 AG543 AB084 26246 Condenser Fan Motor for 50079 42 Left Track of Installation Board for 50079 43 Cover Board of Machine Room for 50079 44 Support Holder of Cabinet for 50079 45 Cover Board of Machine Room for 50079 46 Cabinet for 50079 47 Back Grill for 50079 48 Framework of Door Track for 50079 49 Left Hanger of Grill for 50079 50 Sealing Rubber Strip for 50079 51 Baffle for Evaporator for 50079 52 Defrost Heater for 50079 53 Thermostat Mounting Plate for 50079 54 Upper Shelf for 50079 55 Evaporator Temperature Sensor for 50079 56 Caster with Brake for 50079 57 14 Model RS-CN-0200-B 50078 Model RS-CN-0200-S 50080 Parts Breakdown 15 Parts Breakdown Model RS-CN-0200-B 50078 Item No. Description Position AB607 Right Track of Installation Board for 50078 1 AB634 Installation Board of Compressor for 50078 2 AA248 Condenser Fan Blade for 50078 3 AA300 Condenser for 50078 4 26247 Caster without Brake for 50078 5 AB759 Support Board of Leveling Feet for 50078 6 AB973 Limited Block of Installation Board for 50078 7 Item No. Description AA135 Power Cord for 50078 AA711 AA378 AA124 AB582 AA214 AB604 LED Power Supply for 50078 Temperature Probe Fixer for 50078 Power Switch for 50078 Thermostat for 50078 Thermostat Water Proof Cover for 50078 Sealing Rubber Strip for 50078 Position 21 22 23 24 25 26 27 AB761 Front Grill for 50078 8 AB772 Left Hanger of Grill for 50078 28 AB762 AB763 AG538 AG544 AB765 AB642 AG545 AB644 AB769 AB770 AG546 Fixed Board of Curve Glass for 50078 9 Curve Glass for 50078 10 LED Light and Socket for 50078 11, 12 Bottom Shelf for 50078 13 Shelf Support Board Connector for 50078 14 Right Shelf Support Board for 50078 15 Middle Shelf for 50078 16 Left Shelf Support Board for 50078 17 Right Hanger of Grill for 50078 18 Grill Components for 50078 19 Evaporator for 50078 20 AE984 AA528 AB652 AB650 AB649 AB651 AB778 AB779 AB589 AB590 AG542 Thermostat Installation Cover for 50078 29 Drain Hose for 50078 30 Left Bracket for 50078 31 Middle Bracket for 50078 32 Right Bracket for 50078 33 Air Pipe Protection Board for 50078 34 Glass Door for 50078 35 Framework of Glass Door for 50078 36 Coiled Copper Pipe of Outer Drain Pan for 50078 37 Outer Drain Pan for 50078 38 Inner Drain Pipe for 50078 39 Item No. Description AB719 Compressor for 50078 Position 40 AB595 AB594 AA984 AA249 AB657 AB658 AB784 AB785 AB659 AB787 AB667 AB789 AB790 AG547 AB084 26246 Filter Fixer for 50078 42 Filter for 50078 43 Condenser Fan Motor for 50078 44 Condenser Fan Motor Cover for 50078 45 Left Track of Installation Board for 50078 46 Cover Board of Machine Room for 50078 47 Support Board of Machine Room for 50078 48 Cover Board of Machine Room (Big) for 50078 49 Support Holder of Cabinet for 50078 50 Right Back Grill for 50078 51 Thermostat Mounting Plate for 50078 52 Baffle for Evaporator for 50078 53 Defrost Heater for 50078 54 Upper Shelf for 50078 55 Evaporator Temperature Sensor for 50078 56 Caster with Brake for 50078 57 16 Model RS-CN-0200-S 50080 Parts Breakdown Item No. Description Position AB607 Right Track of Installation Board for 50080 1 AB634 Installation Board of Compressor for 50080 2 AA248 Condenser Fan Blade for 50080 3 AA300 Condenser for 50080 4 26247 Caster without Brake for 50080 5 AB759 Support Board of Leveling Feet for 50080 6 AB973 Limited Block of Installation Board for 50080 7 Item No. Description AA135 Power Cord for 50080 AA711 AA378 AA124 AB582 AA214 AB604 LED Power Supply for 50080 Temperature Probe Fixer for 50080 Power Switch for 50080 Thermostat for 50080 Thermostat Water Proof Cover for 50080 Sealing Rubber Strip for 50080 Position 21 22 23 24 25 26 27 AB795 Front Grill for 50080 8 AB772 Left Hanger of Grill for 50080 28 AB762 AB763 AG538 AG544 AB765 AB642 AG545 AB644 AB769 AB770 AG546 Fixed Board of Curve Glass for 50080 9 Curve Glass for 50080 10 LED Light and Socket for 50080 11, 12 Bottom Shelf for 50080 13 Shelf Support Board Connector for 50080 14 Right Shelf Support Board for 50080 15 Middle Shelf for 50080 16 Left Shelf Support Board for 50080 17 Right Hanger of Grill for 50080 18 Grill Components for 50080 19 Evaporator for 50080 20 AE984 AA528 AB652 AB650 AB649 AB651 AB778 AB779 AB589 AB590 AG542 Thermostat Installation Cover for 50080 29 Drain Hose for 50080 30 Left Bracket for 50080 31 Middle Bracket for 50080 32 Right Bracket for 50080 33 Air Pipe Protection Board for 50080 34 Glass Door for 50080 35 Framework of Glass Door for 50080 36 Coiled Copper Pipe of Outer Drain Pan for 50080 37 Outer Drain Pan for 50080 38 Inner Drain Pipe for 50080 39 Item No. Description AB719 Compressor for 50080 Position 40 AB595 AB594 AA984 AA249 AB657 AB658 AB784 AB785 AB659 AB787 AB667 AB789 AB790 AG547 AB084 26246 Filter Fixer for 50080 42 Filter for 50080 43 Condenser Fan Motor for 50080 44 Condenser Fan Motor Cover for 50080 45 Left Track of Installation Board for 50080 46 Cover Board of Machine Room for 50080 47 Support Board of Machine Room for 50080 48 Cover Board of Machine Room (Big) for 50080 49 Support Holder of Cabinet for 50080 50 Right Back Grill for 50080 51 Thermostat Mounting Plate for 50080 52 Baffle for Evaporator for 50080 53 Defrost Heater for 50080 54 Upper Shelf for 50080 55 Evaporator Temperature Sensor for 50080 56 Caster with Brake for 50080 57 17 Electrical Schematics Model RS-CN-0120-B 50077 Model RS-CN-0200-B 50078 Model RS-CN-0120-S 50079 Model RS-CN-0200-S 50080 18 Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d'avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la carte au niveau de la perforation, puis l'envoyer à l'adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant: Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en: https://omcan.com/warranty-registration/ For mailing in Canada Pour postale au Canada Por correo en Canadá OMCAN PRODUCT WARRANTY REGISTRATION 3115 Pepper Mill Court, Mississauga, Ontario Canada, L5L 4X5 For mailing in the US Pour diffusion aux États-Unis Por correo en los EE.UU. OMCAN PRODUCT WARRANTY REGISTRATION 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, New York USA, 14305 or email to: service@omcan.com Purchaser's Information Name: Address: City: Country: Province or State: Postal or Zip: Dealer from which Purchased: Dealer City: Invoice: Dealer Province or State: Company Name: Telephone: Email Address: Type of Company: Restaurant Bakery Butcher Supermarket Institution (specify): Other (specify): Deli Caterer Model Name: Machine Description: Date of Purchase (MM/DD/YYYY): Would you like to extend the warranty? Yes No Model Number: Serial Number: Date of Installation (MM/DD/YYYY): Thank you for choosing Omcan | Merci d'avoir choisi Omcan | Gracias por elegir Omcan 19 Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products. Depuis 1951 Omcan a grandi pour devenir un des "leaders" de la distribution des équipements et matériel pour l'industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd'hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l'entreprise. Nous nous efforçons d'offrir à nos clients une valeur exceptionnelle grâce à nos ventes locales qualifiées et des représentants de service qui offrent un accès facile à plus de 5000 produits provenant du monde entier. Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 5,000 productos con origen a nivel mundial.Adobe PDF Library 9.9 Adobe InDesign CS5.5 (7.5)