mStation MURCXX Mophie Connect User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1400549
Application ID	OWuKM72rZresjSrlgFmBGw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.32kB (916498 bits)
Date Submitted	2011-01-05 00:00:00
Date Available	2011-01-05 00:00:00
Creation Date	2011-01-05 16:24:25
Producing Software	Acrobat Distiller 8.2.5 (Windows)
Document Lastmod	2011-01-05 17:36:21
Document Title	Microsoft Word - Mophie Connect User Manual_20101211.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	debby.chiang

mophie connect
1190_RCN-RMT-BLK
User Manual
Revision 1.0
Getting Started
Unpacking and Checking the Contents
Unpack the mophie connect and check that the following items are included (If any item is missing
or damaged, repack and return it to your reseller.)
y mophie connect
y Power Adapter
y Micro USB Cable
y IR Cable
y User Manual
Identifying Components
1: Config button
2. Power LED
3. Wireless LED
4. IR learning LED
5. Reset button
6. IR emitting LEDs
7. IR blaster port (for IR cable, to point to IR
receiver of other Home device)
8. IR blaster port (for IR cable, to point to IR
receiver of other Home device)
9. Micro USB port (for power input)
10. Power switch
Note:
You need iPhone application (running on iPhone) to setup and control this device.
mophie connect User Manual
10-2
Connecting the mophie connect for First Use
1. Unpack and plug the mophie connect into an AC outlet
2. Install the mophie connect iPhone application (please download it from Apple Store)
3. Switch the iPhone WiFi settings to point at mophie connect network
4. Launch the mophie connect iPhone application
5. Configure the mophie connect configuration screen and clicks Done
1. Input a nickname or a room name to your
device. Example “Brian’s Room’
2. Choose “Use mophie connect as AP” or “Use
your home network”. If choose “Use mophie
connect as AP”, SSID and Password fields will
disappear
3.Input the SSID of your home network
4, Input the PW of your home network
5. Input your email address (optional for later)
6. Click ‘DONE’
6. mophie connect starts configuring itself
a. If configuration successes, the application automatically switched into the mophie connect
main screen. User is prompted to wait while the HMR-130 configures itself.
b. If configuration failed to connect to the network, please repeat step5.
mophie connect User Manual
10-3
Basic Operations
Choose Pre-defined Device
Example 1: Watch TV
mophie connect User Manual
10-4
Example 2: Watch DVD
mophie connect User Manual
10-5
Add New Device
1. Place your remote control close to mophie connect
2. Select the button you want to teach
3. press the appropriate button on your remote control
4. save the commands
5. back to step 2 to teach other commands
mophie connect User Manual
10-6
mophie connect User Manual
10-7
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1
through 11.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
mophie connect User Manual
10-8
Specifications
PHYSICAL SPECIFICATIONS
Ralink SoC
Processor
External Port
Interface
LED Indication
IR coverage
Power Jack
DC input, MICRO USB type
Power Switch
Turn ON/OFF power
Config Button
Go to Config mode (push>5secs)
IR blaster out
Two IR blaster out ports, 3.5mm type
Reset Button
Reset to factory default setting
Power
Blue: ON, while power on.
Blue: Blinking, IR learning
AP Mode
(default)
Blue: ON, wireless ready
Blue: Blinking, wireless traffic activity
Station
Mode
Green: slow blinking, no connection.
Green: ON, wireless linked
Green: Blinking, wireless traffic activity
Wireless
Emitter
Frequency: 20KHz~56KHz
Coverage: at least 8m, ±45°
IR blaster cable: 3m
Receiver
Frequency: 20KHz~56KHz
Power Supply
5V,1A
Dimension
114x90x26mm
Weight
60g
RADIO SPECIFICATIONS
Solution
Ralink SoC
IEEE 802.11n
WLAN Standard
IEEE 802.11/11b Industry standards
IEEE 802.11g standard
Media Access Protocol IEEE 802.11
2.412 - 2.462 GHz (FCC, North America)
Operating Frequency
2.412 - 2.472 GHz (TELEC, Japan)
2.412 - 2.472 GHz (ETSI, EURO)
11 for FCC, North America
Operating Channels
13 for JTAC, Japan
13 for ETSI, Europe
Data Rate Shifting
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps, and 802.11n offering up to
300Mbps
mophie connect User Manual
10-9
Transmits mode
11n/b/g
Receive mode
11n/b/g
SOFTWARE SPECIFICATIONS
System Management
Wireless
Security
Configuration
Via Web UI
Firmware
upgrade
Allow firmware upgrade through WiFi
Encryption
AES, TKIP, and 64/128 bits WEP
WPA
WPA-PSK mode, WPA2-PSK
UI Communication Protocol
Defined by 3rd Party
ENVIRONMENTAL SPECIFICATIONS
Temperature
Humidity
Operating
0ºC to 40ºC (32ºF to 104ºF)
Storage
-20ºC to 60ºC (-4ºF to 140ºF)
Operating
10% to 85% Non-Condensing
Storage
5% to 90% Non-Condensing
mophie connect User Manual
10-10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : Microsoft Word - Mophie Connect User Manual_20101211.doc
Creator                         : debby.chiang
Create Date                     : 2011:01:05 16:24:25+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:01:05 17:36:21+08:00
Metadata Date                   : 2011:01:05 17:36:21+08:00
Producer                        : Acrobat Distiller 8.2.5 (Windows)
Document ID                     : uuid:cc4ca270-c93c-45a9-b5e3-141061641f9d
Instance ID                     : uuid:e7a74b3e-f9b9-4b96-94b9-da2a61e43df9
Page Count                      : 10
Author                          : debby.chiang

EXIF Metadata provided by EXIF.tools