Magellan RoadMate 5620 User Manual Road Mate LM EN

User Manual: magellan RoadMate 5620 LM - User Manual Free User Guide for Magellan ROADMATE Series GPS, Manual - page2

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

Magellan RoadMate
User Manual
2016

IMPORTANT SAFETY WARNINGS
The Magellan RoadMate receiver is a vehiclenavigation aid designed to assist you in arriving
at your selected destinations. When using
the Magellan RoadMate receiver, these safety
rules must be followed to prevent accidents
that can result in injury or death to yourself or
others:
Please check the applicable regulations in your
state regarding windshield mounting. Certain
states prohibit the mounting of any items on
your windshield. Go to www.magellanGPS.com
for alternative mounting solutions.
When driving, the need to view the display is
minimal. Voice prompts will guide you to your
destination. The driver should enter data or
program the Magellan RoadMate receiver only
when the vehicle is stationary. Only a vehicle
passenger should enter data or program the
Magellan RoadMate receiver while the vehicle
is moving. Do not become distracted by the
receiver while driving, and always be fully
aware of all driving conditions.
It is your responsibility to comply with all
traffic laws and to use the Magellan RoadMate
and mounting options in such a manner that
the user is in compliance with applicable laws.
Roads, points of interest (POIs), business
and service locations may change over
time. As a result the database may contain
inaccuracy. Also, the database does not
include, analyze, process, consider, or
reflect any of the following: legal restrictions
(such as vehicle type, weight, height, width,
load and speed restrictions); road slope or
gradient; bridge height, width, weight or other
limits; population density; neighborhood
quality or safety; availability or proximity of
police, emergency rescue, medical or other
assistance; construction work zones or
hazards; road or lane closures; road, traffic or
traffic facilities’ safety or condition; weather
conditions; pavement characteristics or
conditions; special events; traffic congestion. It
is your responsibility to disregard any unsafe,
hazardous or illegal route suggestions.

Keep the Magellan RoadMate receiver safe
from extreme temperature conditions. For
example, do not leave it exposed to direct
sunlight for an extended period of time.
Take care when mounting the Magellan
RoadMate receiver in your vehicle, whether
using the windshield mount or other mounts,
that it does not obstruct the driver’s view of
the road, interfere with the operation of the
vehicle’s safety devices such as air bags, or
present a hazard to occupants of the vehicle
should the receiver be dislodged while driving.
It is your responsibility to assess the risks
associated with damage to your vehicle or
vehicle occupants as the result of your choices
in mounting the Magellan RoadMate receiver.
Temperature
The maximum operating temperature is 140°F
(60°C).
Battery
The battery in the Magellan RoadMate receiver
is rechargeable and should not be removed. In
the event that it should need to be replaced,
please contact Magellan Technical Support.
Charging the Magellan RoadMate
An optional AC adapter is available as an
accessory for your Magellan RoadMate. Use
of another type of AC adapter can result in
malfunction and/or possible fire hazard due to
battery overheating.
Only use the car charger approved for/supplied
with your Magellan RoadMate receiver. Use of
another type of car charger will result in fire or
electric shock.
For safety reasons, the battery in your
Magellan RoadMate receiver will stop charging
when the ambient temperature is less than
32°F (0°C) or more than 113°F (45°C).
It will take approximately 4 hours of charging
the Magellan RoadMate receiver through
the vehicle power adapter or optional AC
adapter to obtain a full battery charge. It is

recommended that you charge the battery
initially for at least 2 hours.
Use only the charger approved for your
Magellan RoadMate receiver.
Estimated usage of the Magellan RoadMate on
battery power is approximately 2 hours.
Federal Communication Commission
Interference Statement
This equipment has been tested and found
to comply with the limits for class B digital
devices, in accordance with part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one of the following measures:

IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. End users must follow the
specific operating instructions for satisfying
RF exposure compliance.
This transmitter must not be co-located
or operating in conjunction with any other
antenna or transmitter.
In order to maintain compliance with FCC
regulations, shielded cables must be used with
this equipment. Operation with non-approved
equipment or unshielded cables is likely to
result in interference to radio and TV reception.
The user is cautioned that changes and
modifications made to the equipment without
the approval of manufacturer could void the
user’s authority to operate this equipment.
Magellan RoadMate

Tested To Comply
With FCC Standards

Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.

FOR HOME OR OFFICE USE

Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.

The Magellan RoadMate receiver must be
installed and operated at a distance no closer
then 8 inches (20 cm) from the user.

Consult the dealer or an experienced radio/TV
technician for help.

This Class B digital apparatus meets all
requirements of the Canadian InterferenceCausing Equipment Regulations.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.

IC statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference
and
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.

IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits established for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
One or more claims of the following patents may cover this product: U.S. patent No. 5,544,060, U.S.
patent No. 5,654,892, U.S. patent No. 5,832,408 and U.S. patent No. 5,987,375
The information provided in this document is subject to change without notice. Improvements
and enhancements to the product may occur without any formal notification. Check the Magellan
website (www.magellanGPS.com/support) for product updates and additional information.
Canada, avis d’Industry Canada (IC)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This user manual will give you the necessary
information on how to use the various features of the
Magellan RoadMate receiver.
Visit us at magellanGPS.com/support

© 2016 MiTAC International Corporation. The Magellan logo, Magellan, RoadMate and Quickspell are
registered trademarks of MiTAC International Corporation. SmartDetour and OneTouch are trademarks of
MiTAC International Corporation and are used under license by MiTAC International Corporation. All rights
reserved.
All other products and brand names are trademarks of their respective holders.
No part of this user manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose other than the purchaser’s personal use,
without the prior written permission of MiTAC International Corporation.
The information provided in this document are correct at the time that it is created.
MiTAC International Corporation assumes no responsibility or liability for any errors or inaccuracies that may
appear in the contents of this User Manual.
112-0115-001

Table of Contents
Magellan RoadMate GPS Receiver......................................................... 1
Getting Started...................................................................................... 3
Map Screen ........................................................................................... 7
Selecting a Destination........................................................................ 10
Points of Interest (POI)........................................................................ 14
Traveling on a Route............................................................................ 16
OneTouch Menu................................................................................... 18
Traffic.................................................................................................. 20
Settings............................................................................................... 21
Warranty............................................................................................. 25

Magellan RoadMate GPS Receiver
The Magellan® RoadMate® receiver is a
vehicle navigation product that uses GPS
signals from satellites to calculate your
precise location and compute navigational
information to guide you to your destination.
Knowing its position and movement, your
receiver can then overlay this information
on detailed maps to provide a visual
representation of your location.
With the Magellan RoadMate, you can:
• Save searches and addresses to the
OneTouch™ menu for quick access to
favorite destinations.
• Store your home address and quickly get
routing details to your home.
• Enter and save addresses in your address
book and get routing information to those
addresses at any time.
• Route to an address using the QuickSpell™
and Smart City search for easy, errorless
address entry.
• Route to any Point of Interest (POI)
preloaded into your Magellan RoadMate
receiver, including hospitals, restaurants,
shopping malls, parks, and more.
• Receive navigation instructions with Voice
Alerts (Text-to-Speech).
• Create a route with multiple destinations.
• View Highway Exit POIs, a list of gas
stations, restaurants, hotels and auto
repair shops located at nearby highway
exits.
• Personalize your Magellan RoadMate
receiver in the Settings menu.
• Receive traffic information to avoid delays
in your travel (select models only).

Create and customize routes and settings,
knowing that Magellan RoadMate will always
provide cutting-edge mapping, low-power
battery consumption, and secure technology
for your navigation needs.
The Magellan RoadMate receiver has a built-in
battery so, in most cases, you will be able to
follow these instructions while reading them
on your computer screen without plugging
the Magellan RoadMate receiver to AC power
using an optional AC power adapter.
Note: While indoors, you may not get sufficient
satellite signals to compute your location,
so your location information may not be
updated. However, the GPS chipset installed
in the Magellan RoadMate receiver will pick
up satellite signals in some very demanding
locations. You may find that the Magellan
RoadMate receiver will even compute a
position indoors. Even with the improved GPS
chipset, the receiver may not be able to always
compute a fix indoors.
If you are not getting sufficient satellite signals
while in a garage or other structure, move
to a location where there is a clear view of
the sky, and you should immediately see an
improvement in signal strength.
Thank you for using the Magellan RoadMate.

A
B
C

Magellan RoadMate

A Power button
B Audio out
C MicroSD card slot (not available on all receivers)

Note: The microSD card allows you to access optional map regions. Visit the Magellan
Online Shop for additional map regions available for your receiver.

D USB Connection

Note: Power input derives from the vehicle power adapter cable or optional AC power
adapter. The USB connection is also used for connecting your receiver to a personal
computer for map and software updates using the Magellan Content Manager application.
Reset
The reset button is located on the lower right corner of the back of your receiver. To reset your
receiver, gently insert a paperclip into the reset hole to press the reset button with the receiver
turned on. The receiver should restart with factory default settings.

Getting Started

Powering on the Magellan RoadMate receiver
The Power On/Off switch is located on the top
of the Magellan RoadMate receiver.

Turning the Magellan RoadMate receiver On
1. Press the power switch.
after the initial splash
2. Read and tap
Warnings screen is displayed.

Turning the Magellan RoadMate receiver Off
Press the power switch. The receiver will
automatically power off in 15 seconds.

Viewing the Battery Level Indicator
1. Tap on the Menu button in the right
corner of the Map screen.
2. The battery level indicator is located in
the upper right corner of the Main Menu,
just below the satellite signal indicator.
Green bars indicate battery level.
Speaker Volume

Changing the Volume from the Map Screen
1. Tap

. Additional controls appear.

Cancel: Cancels the power off sequence
and returns to last viewed screen.
Power Down Now: Turns the receiver off
immediately, bypassing the 15 second
delay.
Note: The receiver will begin the power
off sequence anytime the power cable is
disconnected from the receiver or power is
turned off at the 12 V power receptacle.
Battery Levels
The Magellan RoadMate receiver has an
internal battery that charges whenever the
receiver is connected to external power.

2. Tap the speaker button to mute the
volume, or tap the + or - buttons to raise
or lower the volume.
3. Tap

Changing the Volume from Settings
1. Access the Main Menu.
2. Tap

3. Tap Sound.
4. Tap inside the Master volume adjust
bar to change the volume level of your
RoadMate receiver.
5. Tap
Note: The battery can only be serviced by
authorized Magellan repair facilities.

to save and exit.

Setting Button Sounds On or Off
1. Access the Main Menu.
2. Tap

3. Tap Sound.
4. Tap the check box for Button Sounds to
3

play (checked) or turn off (unchecked)
button sounds.

Setting Smart Volume On or Off
The Smart Volume feature changes the
receiver volume automatically as your speed
changes to compensate for road noise.

Main Menu
The Main Menu screen is the RoadMate’s
central hub of activity, containing icons
for all of the receiver’s major functions.

1. Access the Main Menu.
2. Tap

3. Tap Sound.
4. Tap the Smart Volume check box to turn
on (checked) or turn off (unchecked) this
feature.
Brightness

Accessing the Main Menu

Accessing the Brightness Control
1. Access the Main Menu.
2. Tap

3. Tap Brightness.

4. Slide the brightness adjust bar to set the
desired brightness.
Note: A Dim on Battery Power option, when
checked, will reduce screen brightness when
operating exclusively on battery power and you
haven’t touched the screen for a few seconds.
This prolongs battery life between charges.

Tap Menu from the Map screen to access:
Address

Enter an address as a
route destination.

Points of
Interest

Select a Point of
Interest (POI) from
a list of preloaded
locations as a
destination.

List of your most
recently visited
destinations, allowing
you to quickly select
one to route to again.

Intersection

Create a route to an
intersection of two
streets.

City Center

Create a route to the
geographical center of
a city.

Current
Location

Displays information
about your position,
including:
• Street name
• Names of streets
around you
• Lat/Long
information for
your position

Coordinates

Enter Coordinates for
Routing.

Back

Access the Map screen.

Address Book

Access the Address
Book to save addresses
and destinations.

Settings

Displays Settings
menu, which can
be used to access
functions for
customizing your
RoadMate receiver.

Satellite
Status

Graphic display of the
strength of satellite
signals being received.

Battery Level

Graphic display of the
current battery level.

Previous destination
list (Enter City only)
When entering a city,
this list displays cities
previously entered.
Tap on a city from the
displayed list to select
that city.

Zip Code

(Enter City only)
Displays a numeric
keypad to quickly enter
a city’s zip code.

List

(Enter City only) Press
the List button while
entering a city to
display a list of cities
beginning with the
characters you have
entered.

(Entering City) Accepts
the suggested city
displayed in the data
field.
(Entering street)
Displays a list of
streets beginning with
the characters entered.

Keypad
The keypad is the most common method for
entering data into your RoadMate receiver.
Understanding the keypad while entering an
address is important for use of your RoadMate.

Selecting From List
When a list of items found in the database are
displayed, use the arrows on the right to move
the list up and down and tap on the desired
item in the list to continue.

Selecting QWERTY or ABC Keyboard

Keypad Overview
Backspace

Moves the cursor one
position backwards, or
deletes the preceding
character.

Shift

Shifts between
uppercase and
lowercase characters.

Space

Inserts a space at the
cursor position.

Numeric

Displays a numeric
keypad.

Symbols

Displays available
symbols.

1. Access the Main Menu.
2. Tap

3. Tap Keyboard.
4. Select QWERTY or ABC.
Notes on Entering Data
If you have trouble getting desired results,
follow these tips:
• Check to see if the name of a location
contains apostrophes and hyphens if you
do not see the POI or street name you are
looking for in the list.
• The more characters you enter, the smaller
the list of possible options is from which to
choose.
5

• You cannot use accented letters when
entering a street or city name. You can
enter city and streets names using only
standard characters.
QuickSpell

Tap the
correct.

button to continue when the city is

button displays a list of
Tapping the
cities that begin with the letters entered.

As letters are entered for a city or street, the
Quickspell feature checks the database for
cities or streets that begin with the letters
entered. Any letters that cannot be used to
spell a city or street name are greyed out.
Smart City Search
The Smart City Search feature attempts to
predict the city you are looking for based on
your position and cities you’ve gone to before.
Whenever entering or searching for an
address, the Enter City Name keyboard is
displayed first.

As letters are entered, Quickspell checks
the database for cities beginning with the
letters entered. Keys that don’t spell a city in
the database are greyed out, and Smart City
Search displays a suggested city in the text
field.

Map Screen

The Map screen is often used when you’re
following a route or just traveling around a
city, and will likely be displayed in one of two
unique modes: normal and routing.
B

Setting the Map Options
You can customize your map display
preferences in Settings.
1. Tap Menu from the Map screen.
2. Tap

3. Tap the Map button.

C
H

4. Use the Map Options screen to customize
your map/display preferences.

G
D

F
E

A Your Current Location
B Turn instructions for next maneuver
Tap to display the maneuver list (available
only when routing). Distance and road name
for the next maneuver. Tap to repeat last voice
instruction.
C Speed limit
D Information Display
Displays speed, time of day, elevation,
compass direction. While routing, it can also
display distance to destination, estimated time
of arrival (ETA), and time remaining. Tap on the
information field to change.
E Zoom in/out
F Access Main Menu

Setting the Map Modes (2D or 3D)
The map is normally displayed in 3D mode.
To set the map to 2D mode:
1. Tap anywhere on the Map screen.
Additional controls appear.
2. Tap 2D to switch the map to 2D mode
from 3D mode, or tap 3D to switch the
map to 3D mode from 2D mode.
3. Tap

G Access list of Highway Exit POIs

3D Landmarks

Available only while on a highway/freeway.

3D Landmarks offer visualization for
architectural landmarks.

H Access Volume controls
I Access One Touch menu
Provides instant access to your saved search
criteria and favorite destinations.
Your position and the time are shown on the
map. As you travel, your position is updated,
giving you a clear view of your position and
surrounding streets.

Setting Zoom Levels
As you zoom out in 3D, the display will switch
to 2D at higher zoom levels.
Tap + or - at the bottom of the Map screen to
set the desired zoom level.
Note: Zoom levels are limited in 3D mode.

Panning on the Map
1. Slide your finger or a stylus across the
Map screen. The map screen changes to
Pan mode.

4. Define what to do with this new route
point if an active route already exists:
Replace Destination: The next destination
is cleared and replaced with the one
selected from the Pan screen.
Go There Now: The selected location is
inserted in the route as an intermediate
destination before the next destination.
Add To Trip: the selected destination is
added to the end of the current trip.
5. Tap
to return to the Map screen and
begin navigating.
Note: If the selected position doesn’t match
an existing street address (i.e. the destination
is not along a road or street that is stored in
the map database), you will be stopped on
the road closest to your destination, and a
dashed line to your final destination will be
displayed on the map.

2. Tap
when you’re finished, and the
map returns to your current position.

Routing to a Panned Position
1. Pan the map until the location you want to
route to is displayed.

Current Location Screen
The Current Location screen displays the
approximate address of your current position,
the next and previous intersections, your
latitude, longitude, heading and elevation.

2. Tap on the map at the point you want to go
to. A red push pin, along with information
about the point chosen, will be displayed
at the top of the screen.

Accessing the Current Location Screen
Tap the Current Position icon from the Map
screen.

3. Tap

in the top left corner.

Saving Your Current Location to Your Address
Book
1. Tap on the Current Position icon from the
Map screen.
2. Tap Save.
3. Edit information.
Note: If you want to save this location to the
OneTouch menu and the address book, check
the Add to OneTouch box.
4. Tap the Name field and use the keypad to
enter a name for the Address Book entry.
Note: Tap List Categories to select a
category for this address. New categories
can be added from the Select Category
from List screen by tapping +Add.
5. Tap

to confirm address details.

6. Assign this entry to a button for your
OneTouch menu if you saved this point to
the OneTouch menu.
Maneuver List (Itinerary)
The Maneuver List is accessed from the Map
screen, and is available only when routing.
Each line in the Maneuver List provides details
about the maneuvers in the order that they are
to be made, with the next maneuver at the top.

Accessing the Maneuver List
Tap the Maneuver icon in the top left corner
of the Map screen when actively on a route.

Avoiding a Maneuver
This feature modifies the route to possibly
avoid a particular maneuver.
1. Access the Maneuver List.
2. Tap
avoid.

next to the maneuver you want to

3. Tap Yes to confirm. The Magellan
RoadMate receiver recalculates the route
and returns you to the Map screen.

Changing Route Options
You can change how a route is computed
by Fastest Time, Shortest Distance, Mostly
Freeways, or Least Use of Freeways.
1. Access the Maneuver List.
2. Tap Route Options. The four types of
routes are displayed with the computed
time.
3. Tap on the desired route option.
4. Tap

to begin routing.

Volume
You can adjust or mute the volume from the
Map screen or from
> Sound.

Changing the Volume from the Map Screen
1. Tap

. Additional controls appear.

2. Tap on the Speaker button to mute the
volume, or tap + or - icons to change the
volume levels.
3. Tap

When muted, a red line appears across
again to unmute
the speaker icon. Tap
the volume.
9

Selecting a Destination

Creating a Destination to an Address
To begin creating an address, enter the city by:
• entering the name of the city
• entering the ZIP code for the city
• selecting a previously used city.
1. Tap

from the Main Menu.

2. Enter City:
Note: You do not need to enter accented
characters.
4. Tap on the street name from the list.
5. Enter Street number:

You can do this in three ways:
Tap
to select the city from the list of
previous cities.
Use the keyboard to enter the first few
characters of any significant word in the
city name to select a new city. If the city
you’re searching for appears in the top
.
field, tap on the city name or
Tap List button to bring up a list of
cities that begin with the characters you
entered. Tap to select the city from the
list.
Tap Zip Code to switch to the numeric
keyboard and enter the ZIP code. Tap to
bring up a list of cities with the zip code
entered.

Use the keyboard to enter the street
number for the address. The range of
acceptable street numbers is displayed
before you start typing. Tap
when the
street number is complete.
The GO screen appears with:
• address of the selected location
• the estimated time of arrival (ETA)
distance to travel
• routing method (e.g. Fastest Time).

3. Enter the Street name.
With the city selected, the keyboard will
be displayed, prompting you for the street
name.
Use the keyboard to enter the street
name. Enter the first few characters of
any word in the street name, and tap
or continue entering characters until the
list of streets is displayed.
10

Tap Options to change routing method.
Tap
6. Tap
screen.

to preview the route.
to begin routing on the Map

Note: To use a destination later, tap Save
(before tapping GO) to save it in your
Address Book or in the OneTouch menu.
Tips on Entering Addresses Quickly
• When you are entering the name of a city
or a street, only characters that appear in
possible search results are displayed. The
other characters are grayed out.
• Tap List after a couple of letters when
entering city names or street names, as
items that contain the specified characters
are listed.
• Search by ZIP codes to narrow the number
of matching cities to (usually) four or fewer.
Intersections

Creating a Destination to an Intersection
An intersecting street can pinpoint the location
when you don’t know the street number.
1. Tap

from the Main Menu.

2. Enter City. To do this:
• Use the keyboard to enter the first few
characters of any significant word in
the city name to enter a new city. Tap
if the city you
on the city name or
are searching for appears in the top
field.
• Tap Previous to select the city from
the list of previous cities.
• Tap List to display a list of cities that
begin with the characters you entered.
Tap to select the city from the list.
• Tap Zip Code to switch to the numeric
keyboard and enter the ZIP code. Tap
to bring up a list of cities with this zip
code.

3. Enter the Street name:
With the city selected, the keyboard will
be displayed, prompting you to enter the
street name.
Use the keyboard to enter the street
name. Enter the first few characters of
any word in the street name and tap
or continue entering characters until the
list of streets is displayed.
Note: You do not need to enter accented
characters.
Tap on the street name from the list.
4. Enter the second street name the same
way as you entered the first street.
A screen appears with:
• address of the selected location
• estimated time of arrival (ETA)
• distance to travel
• routing method (e.g. Fastest Time).
Note: Tap Options to change the routing
method.
5. Tap
screen.

to begin routing on the Map

City Centers

Creating a Destination to a City Center
City Center lets you select any city on the map
as your destination, which is useful when
you want to go to a city without selecting any
specific address.
Note: A route to a city center uses the
geographical center of the city as the
destination point.
1. Tap

from the Main Menu.

2. Enter City:
Tap Previous to select the city from the
list of previous cities.
Use the keyboard to enter the first few
characters of any significant word in the
city name to select a new city. If the city
you are searching for appears in the top
.
field, tap on the city name or
11

Tap on the List button to access a list of
cities that begin with the characters you
entered. Tap to select a city from the list.
Tap the Zip Code button to switch to the
numeric keyboard and enter the ZIP code.
Tap to bring up a list of cities with the zip
code entered.
A screen appears with:
• address of the selected location
• estimated time of arrival (ETA)

Address Book

Saving a Destination to Your Address Book
Whenever you create a destination, you can
save the destination to your address book
before beginning the route.
1. Tap Save on the Go screen.
2. Select Add to OneTouch when the Edit
Information screen is displayed to save
this location to the OneTouch menu.

• distance to travel
• routing method (e.g. Fastest Time).
Note: Tap Options to change the routing
method.
3. Tap
screen.

to begin navigating on the Map

Previous Destinations

Routing to a Previous Destination
1. Tap

from the Main Menu.

2. Select a destination from the list of
previous destinations.
A screen appears with:
• address of the selected location
• estimated time of arrival (ETA)
• distance to travel
• routing method (e.g. Fastest).
Note: Tap Options to change the routing
method.
3. Tap
screen.

to begin navigating on the Map

Clearing the list of Previous Destinations
1. Access the list of Previous Destinations.
2. Tap Delete All.
3. Tap Yes to confirm the deletion and clear
the list.

Edit information:
Tap the Name field and use the keyboard
to enter a name for the address book
entry.
Tap Work, Cell or Home phone to specify
a phone number for the address book
entry.
Tap List Categories to display a list
of categories you’ve created for your
address book. If necessary, create a new
category by tapping + Add at the bottom
of the screen.
3. Tap
to confirm the details for this
address.
To save this to the OneTouch menu, you will
be asked to assign it to a OneTouch button.

Accessing an Address in Your Address Book
1. Tap

from the Main Menu.

2. Tap the top left corner of the screen
to easily find the desired address by
narrowing the list by the first letter of the
address book entries.

Routing to an Address in Your Address Book
1. Access the address record from your
address book.
2. Tap
on the desired address book
entry. A screen appears with:
• address of the selected location
• estimated time of arrival (ETA)
• distance to travel
• routing method (e.g. Fastest Time).
Note: Tap Options to change the routing
method.
3. Tap
screen.

to begin navigating on the Map

Points of Interest (POI)

The RoadMate receiver has preloaded POIs,
such as restaurants and gas stations, that can
be used as destinations for routes.

Creating a Route to a POI by Category
POIs are categorized into unique categories
like gas stations and tourist attractions.
Most categories are further organized into
subcategories. Restaurants, for example, have
several subcategories for Chinese food, fast
food, or other favorites.
1. Tap

from the Main Menu.

2. Tap one of the POI categories in the list.

Creating a Route to a POI by Name
1. Tap

from the Main Menu.

2. Tap Search By Name.
3. Enter the name of the POI to be used as
the destination and tap
. POIs near
your current position are displayed
Note: Enter as many characters as possible
to make it easier to find the exact POI you are
searching for.
4. Tap Near for different search criteria
(Near Current Position, City, or Address).
Enter city or address information when
you select Near City or Near Address.
5. Select the desired POI from the POIs list.
The GO screen appears with
• address of the selected location
• estimated time of arrival (ETA)
• distance to travel
• routing method (e.g. Fastest Time).

3. Tap one of the POI subcategories (if any)
in the list to narrow the search. POIs near
your current position are displayed.
4. Tap Near... for different search criteria
(Near Current Position, City, or Address).
Enter city or address information when
you select Near City or Near Address.
5. Select the desired POI from the POIs list.
The GO screen appears with:
• address of the selected location
• estimated time of arrival (ETA)
• distance to travel
• routing method (e.g. Fastest Time).
6. Tap Options to change the routing method
(Fastest Time, Shortest Distance, Mostly
Freeways, or Least Use of Freeways).

6. Tap Options to change the routing
method.
7. Tap
screen.

to begin navigating on the Map

Creating a Route to a Highway Exit POI
The Highway Exit POIs function lets you access
commonly used POIs near an exit you’re
approaching while travelling on a highway,
such as restaurants, gas stations, car repair
facilities and hotels.
Freeway Exit POIs can be accessed while on
a route or just driving, as long as you are on a
freeway.
1. Tap Highway Exit POIs when it appears
on the Map screen. A list of upcoming
freeway exits and their distance from your
current position appears.

7. Tap
to begin navigating to the
selected POI on the Map screen.
14

Symbols represent service POIs near the exits:
Restaurants
Gas Stations
Car Repair
Accommodations
2. Tap a symbol to get a list of related POIs
near the exit.
3. Select a POI from the list, and tap

The GO screen appears with
• address of the selected POI
• estimated time of arrival (ETA)
• distance to travel
• routing method.
4. Tap Options to change the routing
method.
5. Tap
to begin navigating to the
selected POI on the Map screen.

Traveling on a Route 6
Map Screen

Types of Routes

A route is displayed on the Map screen in
green with small arrows indicating direction of
travel once the route has been calculated.
The name of the next street in your Turn List
as well as its distance is displayed on the top
of the screen. If you are not in the same city
as the next street, the name of that city is
displayed instead.

You can use a wide variety of methods to create
a route.

Routing Method

As the route progresses, voice alerts will be
used to prompt you of upcoming maneuvers.
Maneuver List
The Maneuver List displays all maneuvers
along your route until your chosen destination.
Tap on the Maneuver icon in the top left corner
of the Map screen to view the Maneuver List.

Fastest Time (Fast): the fastest possible route
provided the vehicle is able to travel at or near
the speed limit.
Shortest Distance (Short): the shortest
possible route.
Mostly Freeways: the route that uses freeways
whenever possible.
Least Use of Freeways: the route that avoids
freeways whenever possible.
When a destination is selected, the RoadMate
offers the route with the default selected
routing method first.

Accessing the Maneuver List
Tap the Maneuver icon in the top left corner of
the Map screen when you’re actively following
a route.

Excluding a Maneuver
You can modify the route to possibly avoid a
particular maneuver.
1. Access the Maneuver List.
2. Tap
avoid.

for the maneuver you want to

Changing the Routing Method
To change the routing method, tap Options on
the GO screen. The RoadMate calculates the
route with different methods.
1. Tap on the Maneuver List for the route
method desired.
2. Tap the desired routing method in the list,
and the previous screen returns with the
new calculation.

3. Tap Yes to confirm.
The RoadMate receiver recalculates the route
and returns you to the Map screen.
16

To Change the Default Routing Method
2. Tap Navigation Preferences.

Different detours are calculated using the
same routing method that was used to create
the route. The list of alternate routes is
displayed.

3. Select a default routing method using the
Route Method drop-down menu.

3. Tap the button on the right to check the
Maneuver List of an alternate route.

1. Tap

from the Main Menu.

Special Routing Functions

4. Tap the desired alternate route.

Cancelling a Route
1. Tap Menu from the Map screen.
2. Tap Cancel Trip on the Main Menu.

3. Tap Yes to confirm that you want to cancel
the route.
OR
4. Tap the OneTouch icon from the Map
screen to display the OneTouch menu.
5. Tap Cancel Trip.
6. Tap Yes to confirm that you want to cancel
the route.

Detouring off a Route
1. Tap Menu from the Map screen.
2. Tap

OneTouch Menu

The OneTouch™ menu provides quick access to
your home address, emergency services, gas
stations, and addresses or searches stored in
the OneTouch menu.

Accessing the OneTouch Menu
Tap the OneTouch icon in the upper right
corner of the Map screen.

Saving an Address to a OneTouch Icon
1. Tap
in the top right corner of
the Map screen. The OneTouch menu
appears.
2. Tap an Assign icon.
3. Tap Location.
4. Enter the address (city, street and
number) for the OneTouch icon using the
keypad. When the address is complete,
you are prompted to enter a name for the
button.
5. Enter a name for the button using the
.
keypad and tap
6. Go to the Map screen and access the
OneTouch menu to verify that the address
has been added.

The Home Button
Tap the Home icon.

Changing the Address or Search of a OneTouch Icon

If you have a Home Address saved, the receiver
will give you information to navigate to your
home.

1. Tap
in the top right corner of
the Map screen. The OneTouch menu
appears.

If you do not have a Home Address saved, you
will be prompted to enter one:

2. Tap Edit.
3. Tap on the OneTouch button you want to
edit.
4. Tap the Re-assign button.
5. Tap Yes to confirm.
6. Follow OneTouch instructions.

Saving a POI Search Criteria to a OneTouch
Icon
Tap Yes to enter your home address using the
Enter Address keyboard.
Tap Use My Current Location to make your
current location your Home.
Note: To edit or delete your Home address, go
to the Address Book in the Main menu and edit
the Home entry.

You can also save POI search criteria to a
OneTouch button for later use, as you may
frequently search for coffee shops near your
location or gas stations along your route.
1. Tap
in the upper right corner of the
Map screen.
2. Tap one of the Assign buttons.
3. Tap Search.
4. Tap one of the POI categories in the list.
18

5. Tap one of the POI subcategories (if any)
in the list to further narrow the search,
or tap All Subcategories to select all the
subcategories or continue defining your
search criteria.
6. Enter a name for the button using the
.
keypad and tap

Setting a Route to a OneTouch Icon
Once you’ve set up the OneTouch menu, you
can go to a saved address or search.
1. Tap the OneTouch icon in the top right
corner of the Map screen.
2. Tap one of the assigned OneTouch
buttons.
3. Tap on the desired POI if the assigned
button is for a search and POIs are
displayed.
The Preview icon at the bottom of the display
allows you to step through the available POIs
while viewing their location on the map.
The Near... button allows you to select how
the list is sorted:
• near your current position
• near a city you define
• near an address you enter.
4. Tap

to begin the route.

Note: The GO screen appears whether the
destination was chosen from a list of POIs or
by an address.

Traffic

Traffic features are only available on select
RoadMate models.
Glossary
RDS: Radio Data System. Infrastructure that
broadcasts digital information on the FM band.
TMC: Traffic Message Channel. Type of
information broadcast by a Radio Data System.
Public TMC Service: In some countries, there
is at least one TMC service provider that
broadcasts Traffic information free of charge.
The RoadMate automatically receives public
TMC services no matter which country you’re
in.

Avoiding Traffic Incidents
You can choose to avoid traffic incidents along
your route during a delay.
1. Tap on the Traffic icon while traveling
on a route. The Avoid Traffic screen is
displayed.
Note: The Avoid Traffic screen displays
automatically when the computed delay is
greater then 20% of the entire trip.

For an updated list of countries and providers,
visit www.magellangps.com.
Traffic Message: A message received by the
RoadMate containing the description of a
Traffic event.
Traffic Event: An event liable to disturb the
flow of traffic.

Traffic Incidents
When routing, if a traffic event (e.g. incident(s),
slow traffic) will delay your arrival, the traffic
icon on the Map screen will display the
computed traffic delay (in minutes) in the red
box below the traffic icon.

The Avoid Traffic button is active when an
alternative route is available. The button is
grayed out and says No Alt Route when there
is no alternate route.
2. Tap Avoid Traffic. The route will be
changed and the Map screen displayed.

Traffic signals being received and no
delay found on route.
Delay is less than 15% of entire
route.
Delay is more than 15% of entire
route.
No Signal indicator. Device is
searching for signal.

Settings 9
User Settings allow you to customize your
RoadMate receiver to your personal needs.
Note: Tapping the Back arrow from a Settings
screen saves any changes you’ve made.

Accessing System Settings
Tap

from the Main Menu.

Setting Heading Up or North Up in 2D Mode
1. Tap

from the Main Menu.

2. Tap Map.
3. Tap 3D, 2D Heading Up, or 2D North Up to
toggle between settings.

Assigning Visible POIs
POI icons displayed on the map can be turned
on or off to avoid visual clutter.
1. Tap

from the Main Menu.

2. Tap Map.
3. Tap POI Visibility.
4. Check POIs you want shown and
unchecked POIs you want hidden on the
POI Selection screen.

Setting Auto Zoom on Turns

Map Options

You can set the map to automatically zoom in
to the lowest level when approaching a turn.
1. Tap

from the Main Menu.

2. Tap Map.
3. Check Auto Zoom on Turns.

Setting Highway Lane Assist

Setting Auto Night Map Display
The map is normally displayed in vivid colors
for daytime use, and with dark tints for
night use. You can choose whether to always
use daytime colors, night colors, or let the
RoadMate receiver automatically switch
between them right before sunrise and right
after sunset.
1. Tap

from the Main Menu.

When Highway Lane Assist is checked, the
map displays highway signs as you approach
a highway interchange, visual indicating which
lane you should be in.
1. Tap

from the Main Menu.

2. Tap Map.
3. Check Highway Lane Assist.

Setting 3D Building Display
1. Tap

from the Main Menu.

2. Tap Map.

3. Tap Night Mode to select Automatic
for timed adjustment, on always, or off
always.

3. Check 3D Building Display.

Sound

1. Tap

Setting Volume from Settings
1. Tap

from the Main Menu.

2. Tap Sound.
3. Slide the volume slider bar to the desired
volume level.

Turning Button Sounds On/Off
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.
3. Select a default Turn Warning Alert sound
from the drop-down menu.

Enabling Landmark Guidance
Landmark Guidance uses common landmarks
when available to help you identify streets
requiring a maneuver.
1. Tap

from the Main Menu.

2. Tap Sound.

2. Tap Navigation Preferences.

3. Tap Button Sounds to activate (checked)
or de-activate (unchecked) audible
sounds when a button is tapped.

3. Check Enable Landmark Guidance to
turn Landmark Guidance on.

Turning Smart Volume On/Off
Smart Volume adjusts sound levels based on
road noise caused by vehicle speed, which can
make the speaker harder to hear.
1. Tap

from the Main Menu.

2. Tap Sound.
3. Tap Smart Volume to activate (checked) or
de-activate (unchecked) Smart Volume.

Enabling Spoken Street Names
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.
3. Check Enable Spoken Street Names
to allows audible street names during
navigation.

Enabling U Turn Guidance
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.

Navigation

3. Check Enable U Turns to allow the
receiver to use U-turns during your route.

Avoiding Toll Roads
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.
3. Check Avoid Toll Roads to tell the
receiver to avoid toll roads whenever
possible.

Setting The Default Route Method
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.
3. Select a default routing method from the
drop-down menu.

Setting The Turn Warning Alert Sounds

Safe-Driving Mode
Safe-Driving Mode is designed to encourage
a safer driving experience by disabling access
to high-involvement activities while you’re
driving over 10 MPH. Safe-Driving Mode is
automatically enabled on your receiver.
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.
22

3. Tap Safe-Driving Mode to activate
(checked) or de-activate (unchecked)
Safe-Driving Mode.
Note: When you’re driving over 10 MPH while
Safe-Driving Mode is enabled, the Menu button
is disabled, but other features on the Map
screen, such as Traffic, OneTouch, etc., are
accessible.
If you attempt to access a disabled feature,
a pop-up message briefly appears on your
screen, reminding you to find a safe place to
stop before accessing that feature.

Headlight Reminder
The Headlight Reminder alerts you to turn on
your vehicle’s headlights when the receiver
switches to Night Mode around sunset. The
Headlight Reminder is automatically enabled
on your receiver.
1. Tap

from the Main Menu.

2. Tap Navigation Preferences.
3. Tap Headlight Reminder to activate
(checked) or de-activate (unchecked) the
Headlight Reminder.
When the Headlight Reminder is activated,
the
icon appears for 15 seconds when the
receiver switches to Night Mode.
You will also hear an audible alert that says
“Remember to turn on your headlights!”
Note: The Headlight Reminder notification only
occurs when the receiver switches from Day
Mode to Night Mode.

4 (reminder after 4 hours of driving)
5 (reminder after 5 hours of driving)
Note: The default Driving Break Reminder
option is 2 hours.
icon for 15
While driving, you will see the
seconds after your selected reminder time
has elapsed from the time you turned on your
receiver in your vehicle, even if you didn’t
select a route.
You will also hear an audible alert saying
“You have been driving for (1, 2, 3, 4, 5) hours.
Consider taking a driving break.”
Note: The Driving Break Reminder countdown
will restart once the icon has been displayed
for 15 seconds or after turning the receiver
back on from being turned off.
Brightness

Setting Brightness
1. Access the System Settings menu (above).
2. Tap Brightness.
3. Slide the Brightness slider to set the
brightness of the display.
4. Tap the Back arrow.
5. Check Dim on Battery Power to dim the
display while using internal battery power.
Languages

Setting Languages
1. Access the System Settings menu.

Driving Break Reminder

2. Tap Languages.

The Driving Break Reminder option enables
your receiver to alert you when you may need
to pause after a long drive.

3. Tap the desired language.

1. Tap

4. Confirm the change.
5. Tap the back arrow.

from the Main Menu.

2. Tap Navigation Preferences.
3. Move the Driving Break Reminder slider
from Off (no reminder) to:
1 (reminder after 1 hour of driving)
2 (reminder after 2 hours of driving)
3 (reminder after 3 hours of driving)
23

Speed Warnings

Setting Speed Warning Options
1. Tap

from the Main Menu.

2. Tap Speed Warning.
3. Set Audible Warning on or off.
4. Set Visible Warning on or off. This
determines if the speed limit icon is
displayed on the screen.
5. Set the number of miles above the speed
limit you want to receive the warnings.

Viewing the GPS Status
1. Tap

from the Main Menu.

2. Tap GPS.
3. Tap Status.
Note: You can also access the GPS Status
screen by tapping on the satellite signal
indicator in the upper right corner of the
OneTouch screen.
Auto Power Off

Route Area Avoidance
Route Area Avoidance allows you to manually
select an area to avoid along your route.
1. Tap

from the Main Menu.

2. Tap Route Area Avoidance.
3. Tap Add to select a new area to avoid.
Note: If you haven’t yet added any areas to
avoid, Add is the only accessible option.
4. Pan around and zoom in and out of the map
to select an area within the red box to avoid.
5. Tap Select to choose the areas you want to
avoid, or the Back icon to cancel the action.
6. Tap Confirm on the message that appears,
Cancel Area Avoidance to cancel the
selection, or the Back icon to select a
different area.
The area you selected is now accessible from
your Route Area Avoidance list.
Note: Your route will still include freeways and
highways in the areas that you choose to avoid.
Once you’ve created one or more areas to
avoid, you can:

Setting Auto Power Off

•

Edit the details of these areas.

Auto Power is the duration of time that the
Magellan RoadMate receiver automatically
turns off after remaining idle.

•

Add new areas to avoid.

•

Select one or more areas to avoid during a
route.

•

Remove any of these areas from your list.

1. Access the System Settings menu.
2. Tap Auto-Off.
3. Tap on the desired duration.
4. Tap the back arrow.
Default System Settings

Restoring All Default System Settings

Note: You can only edit one area at a time.
When you select multiple areas, the Edit
function is disabled.
Product Information

Viewing Product Information

1. Access the System Settings menu.

1. Tap

from the Main Menu.

2. Tap Restore Default.

2. Tap Product Information.

3. Confirm that you want to proceed in
restoring all the system defaults.

3. Scroll down the page to view the Serial
Number and Software Version.

Magellan Limited Warranty
All Magellan global positioning system (GPS) receivers
are navigation aids, and are not intended to replace other
methods of navigation. The purchaser is advised to perform
careful position charting and use good judgment. READ THE
USER GUIDE CAREFULLY BEFORE USING THE PRODUCT.
1. MAGELLAN WARRANTY
(a) MiTAC Digital Corp. (“Magellan”) warrants its GPS
receivers and hardware accessories to be free from defects
in material and workmanship and will conform to its
published specifications for the product for a period of one
year from the date of original purchase. THIS WARRANTY
APPLIES ONLY TO THE ORIGINAL CONSUMER PURCHASER
OF THIS PRODUCT.
(b) In the event of a defect, Magellan will, at its discretion,
repair or replace the hardware product with a product of like
kind or quality, which may be new or reconditioned, with no
charge to the purchaser for parts or labor. Magellan’s limit
of liability under the limited warranty shall be the actual
cash value of the product at the time the purchaser returns
the product to Magellan for repair less a reasonable amount
for usage, as determined by Magellan in its sole discretion.
The repaired or replaced product will be warranted for 90
days from the date of return shipment, or for the balance of
the original warranty, whichever is longer.
(c) Magellan warrants that software products or software
included in hardware products will be free from defects in
the media for a period of 30 days from the date of shipment
and will substantially conform to the then current user
documentation provided with the software (including
updates thereto). Magellan’s sole obligation shall be the
correction or replacement of the media or the software so
that it will substantially conform to the then- current user
documentation. Magellan does not warrant the software will
meet purchaser’s requirements or that its operation will
be uninterrupted, error-free or virus-free. The purchaser
assumes the entire risk of using the software.
2. PURCHASER’S REMEDY
PURCHASER’S EXCLUSIVE REMEDY UNDER THIS
WRITTEN WARRANTY OR ANY IMPLIED WARRANTY
SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT,
AT MAGELLAN’S OPTION, OF ANY DEFECTIVE PART OF
THE RECEIVER OR ACCESSORIES WHICH ARE COVERED
BY THIS WARRANTY. REPAIRS UNDER THIS WARRANTY
SHALL ONLY BE MADE AT AN AUTHORIZED MAGELLAN
SERVICE CENTER. ANY REPAIRS BY A SERVICE CENTER
NOT AUTHORIZED BY MAGELLAN WILL VOID THIS
WARRANTY.
3. PURCHASER’S DUTIES

submitting a repair request through our website at www.
magellanGPS.com, prior to shipping. The purchaser must
return the product postpaid with a copy of the original
sales receipt, purchaser’s return address and the RMA
number clearly printed on the outside of the package to
the Authorized Magellan Service Center address provided
by Magellan with the RMA number. Magellan reserves the
right to refuse to provide service free-of-charge if the sales
receipt is not provided or if the information contained in it
is incomplete or illegible or if the serial number has been
altered or removed. Magellan will not be responsible for
any losses or damage to the product incurred while the
product is in transit or is being shipped for repair. Insurance
is recommended. Magellan recommends the use of a
trackable shipping method such as UPS or FedEx when
returning a product for service.
4. LIMITATION OF IMPLIED WARRANTIES
Except as set forth in item 1 above, all other expressed
or implied warranties, including those of fitness for
any particular purpose or merchantability, are hereby
disclaimed AND IF APPLICABLE, IMPLIED WARRANTIES
U N D E R A R T I C L E 3 5 O F T H E U N I T E D N AT I O N S
CONVENTION ON CONTRACTS FOR THE INTERNATIONAL
SALE OF GOODS. Some national, state, or local laws do
not allow limitations on implied warranty on how long an
implied warranty lasts, so the above limitation may not
apply to you.
5. EXCLUSIONS
The following are excluded from the warranty coverage:
(a) periodic maintenance and repair or replacement of parts
due to normal wear and tear;
(b) batteries;
(c) finishes;
(d) installations or defects resulting from installation;
(e) any damage caused by (i) shipping, misuse, abuse,
negligence, tampering, moisture, liquids, proximity or
exposure to heat, or improper use; (ii) disasters such as fire,
flood, wind, and lightning; (iii) unauthorized attachments or
modification;
(f) service performed or attempted by anyone other than an
authorized Magellan Service Center;
(g) any product, components or parts not manufactured by
Magellan,
(h) that the receiver will be free from any claim for
infringement of any patent, trademark, copyright or other
proprietary right, including trade secrets

For repair or replacement on a Magellan product the
purchaser must obtain a Return Materials Authorization
(RMA) number from Magellan Technical Support or by

(i) any damage due to accident, resulting from inaccurate
satellite transmissions. Inaccurate transmissions can
occur due to changes in the position, health or geometry
of a satellite or modifications to the receiver that may be
required due to any change in the GPS.
(Note: Magellan GPS receivers use GPS or GPS+GLONASS
to obtain position, velocity and time information. GPS
is operated by the U.S. Government and GLONASS is
the Global Navigation Satellite System of the Russian
Federation, which are solely responsible for the accuracy
and maintenance of their systems. Certain conditions can
cause inaccuracies which could require modifications to the
receiver. Examples of such conditions include but are not
limited to changes in the GPS or GLONASS transmission.).
The opening, dismantling or repairing of this product by
anyone other than an authorized Magellan Service Center
will void this warranty.

or the U.N. Convention on Contracts for the International
Sale of Goods, and shall benefit Magellan, its successors
and assigns. This warranty does not affect the consumer’s
statutory rights under applicable laws in force in their
locality, nor the customer’s rights against the dealer arising
from their sales/purchase contract.
For further information concerning this limited warranty,
please visit Magellan’s website at magellangps.com or
contact:
MiTAC Digital Corp. 279 E Arrow Hwy, San Dimas, CA 91773,
USA
USA & Canada: 800-707-9971
Mexico: 866-310-7223

6. EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES
(a) MAGELLAN SHALL NOT BE LIABLE TO PURCHASER
( b ) O R A N Y OT H E R P E R S O N FO R A N Y I N D I R E CT ,
I N C I D E N TA L O R C O N S E Q U E N T I A L D A M A G E S
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST
PROFITS, DAMAGES ARISING FROM A DELAY OR LOSS
OF USE, OR OUT OF THE BREACH OF THIS WARRANTY
OR ANY IMPLIED WARRANTY EVEN IF CAUSED BY THE
NEGLIGENCE OR ANOTHER FAULT OF MAGELLAN OR
OUT OF THE NEGLIGENT USAGE OF THE PRODUCT. IN NO
EVENT WILL MAGELLAN BE HELD RESPONSIBLE FOR
SUCH DAMAGES, EVEN IF MAGELLAN HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
(c) Some national, state, or local laws do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply
to you.
7. COMPLETE AGREEMENT
(a) This written warranty is the complete, final and exclusive
agreement between Magellan and the purchaser with
respect to the quality of performance of the goods and any
and all warranties and representations. THIS WARRANTY
SETS FORTH ALL OF MAGELLAN’S RESPONSIBILITIES
REGARDING THIS PRODUCT. THIS WARRANTY GIVES
YOU SPECIFIC RIGHTS. YOU MAY HAVE OTHER RIGHTS
WHICH VARY FROM LOCALITY TO LOCALITY AND CERTAIN
LIMITATIONS CONTAINED IN THIS WARRANTY MAY NOT
APPLY TO YOU.
(b) If any part of this limited warranty is held to be invalid or
unenforceable, the remainder of the limited warranty shall
nonetheless remain in full force and effect.
This limited warranty is governed by the laws of the State of
California, without reference to its conflict of law provisions

Need Technical Support?
If you need technical support for your Magellan receiver you should first go
to www.magellangps.com/support for answers to most questions.
If you can’t find a solution there, you can contact Magellan Technical Support
directly by e-mail at support.us@cs.magellangps.com or call 800-707-9971.

Connect with us
@MagellanGPS

MiTAC Digital Corporation
279 E Arrow Hwy, San Dimas, CA 91773 USA

www.magellanGPS.com

© 2016 MiTAC International Corporation. The Magellan logo and Magellan are registered trademarks of MiTAC
International Corporation, and OneTouch is a trademark of MiTAC International Corporation and are used under license by
MiTAC Digital Corporation. All rights reserved.
All other trademarks and registered trademarks are property of their respective owners.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Tim Jewell
Create Date                     : 2016:03:04 09:15:06-08:00
Modify Date                     : 2016:09:07 08:16:04-07:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:09:07 08:16:04-07:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 8558 bytes, use -b option to extract)
Instance ID                     : uuid:a96dc0f9-ee4e-4565-af75-32efc6a6b285
Original Document ID            : xmp.did:1060D94C70A0E11189D78CE36881BBA5
Document ID                     : xmp.id:a0591d9a-d8b5-dc47-bbc7-23c21ff93956
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:03:04 09:15:06-08:00
Derived From Instance ID        : xmp.iid:ac518a04-4def-f644-9835-df468806a57a
Derived From Document ID        : xmp.did:1060D94C70A0E11189D78CE36881BBA5
Derived From Original Document ID: xmp.did:1060D94C70A0E11189D78CE36881BBA5
Derived From Rendition Class    : default
Format                          : application/pdf
Title                           : RoadMate 5620 User Manual
Creator                         : Tim Jewell
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 612.000000
Max Page Size H                 : 792.000000
Max Page Size Unit              : Points
Font Name                       : DINOT-Regular, DINOT-Bold
Font Family                     : DINOT, DINOT
Font Face                       : Regular, Bold
Font Type                       : Open Type, Open Type
Font Version                    : Version 7.460;PS 7.046;hotconv 1.0.38, Version 7.460;PS 7.046;hotconv 1.0.38
Font Composite                  : False, False
Font File Name                  : DINOT-Regular.otf, DINOT-Bold.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 32
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools

Magellan RoadMate 5620 User Manual Road Mate LM EN

Navigation menu

Versions of this User Manual:

Views

Navigation