Micromat TechTool Protege ReadMe Tech Tool Protégé Quick Start Guide En

User Manual: micromat TechTool Protégé - Quick Start Guide Free User Guide for Micromat TechTool Pro Software, Manual

Open the PDF directly: View PDF .
Page Count: 2

Quick Start

Select the program you want to use from the program

selection dialog and press the Run button. (Note that

you can choose a different language first if desired.)

When finished using the program, choose Quit from

the program’s File menu. This returns you to the pro-

gram selection dialog. You can then select and run

another program, select a volume and restart the com-

puter from it, or shut down the computer. Always be

sure to either unmount TechTool Protege or shut down

the computer before unplugging TechTool Protege.

For further information about using either TechTool Pro or DiskStudio™, refer to the program

documentation that is included on the TechTool Protege CD.

©2007 Micromat, Inc. All rights reserved. TechTool is a registered trademark of Micromat, Inc. TechTool Protege and DiskStudio are trademarks of Micromat, Inc.

Package Contents: TechTool Protege FireWire flash drive, TechTool Protege

CD, TechTool Pro manual, and TechTool Protege Quick Start Guide. The

TechTool Pro and DiskStudio Installers are included on the TechTool Pro-

tege CD, as well as PDF versions of the program manuals. TechTool Pro and

DiskStudio are also pre-installed on the TechTool Protege.

1

2

3

Plug TechTool Protege into an available FireWire port on

the computer.

NOTE: Before using TechTool Protege for the first time,

please refer to the TechTool Protege ReadMe file in-

cluded on the TechTool Protege CD. The CD also contains

a program called Protege Manager. Use this program

to restore the software on the Protege should that ever

become necessary.

4

If the computer is powered on and functioning prop-

erly, double-click the TechTool Protege icon in the

TechTool Protege window. This will boot the computer

from TechTool Protege.

If the computer is powered off or is not functioning

properly, start it up while holding down the option key.

Select the TechTool Protege icon. For PowerPC-based

Macs, press the right pointing arrow on the screen. This

will boot the computer from TechTool Protege.

TechTool Protege Main Window

Program Selection Window

Connecting TechTool Protege

To use Protege Manager:

1. Connect TechTool Protege to a FireWire port on the computer.

2. Launch Protege Manager.

3. Click through the information screen and license agreement.

4. Select the appropriate button in the Platform Conguration

screen–either intel, PowerPC, or Universal–and click Continue.

5. Enter an administrator password for the computer in the Au-

thenticate dialog and press the OK button.

6. Protege Manager will then congure the Protege using the

software for the selected system.

7. When complete, disconnect the Protege. Press Quit if you are nished or attach another Protege and

press Continue to perform another conguration.

Protege Manager

Use Protege Manager to congure TechTool Protege with a PowerPC, an Intel, or a Universal system. (The

Universal system is only available for 2GB or larger devices.) Reconguring Protege will completely erase it

and copy all new software onto it. If the Protege currently has a custom conguration, consider backing up

its contents before using Protege Manager to re-congure it. Instructions for backing up and restoring the

Protege are included below.

Protege Backup and Restore

Backup TechTool Protege:

1. Connect TechTool Protege to a FireWire port on the computer.

2. Launch the Protege Backup application located in the Protege Backup folder on the TechTool Protege

CD.

3. With the TechTool Protege connected, click the Backup button.

4. A dialog will appear asking where you would like the disk image of TechTool Protege saved. By default,

the disk image will be saved to the user desktop with the name TechTool Protege.

5. Click the Save button.

6. Type in your user admin password to authenticate the start of the backup request for TechTool Protege.

7. When the backup is complete, a dialog will appear stating that Protege Backup has completed success-

fully. Click the OK button.

8. Save the created .dmg disk image of TechTool Protege in the event that you need to restore your

TechTool Protege drive in the future.

Restore TechTool Protege:

1. Connect TechTool Protege to a FireWire port on the computer.

2. Launch the Protege Backup application located in the Protege Backup folder on the TechTool Protege

CD.

3. With the TechTool Protege connected, click the Restore button.

4. A navigation window will appear asking for the location of a previously saved TechTool Protege disk im-

age. Select the previously saved TechTool Protege disk image and then click the Open button.

5. Once a previously saved TechTool Protege disk image has been chosen, type in your user admin pass-

word to authenticate the start of the restore request for TechTool Protege.

6. When the restore is complete, a dialog will appear stating that Protege Backup has completed success-

fully. Click the OK button.

7. TechTool Protege will now be restored back from the previously saved TechTool Protege disk image.