User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2572903 |
| Application ID | 0XAJ84x25nz5H9q9aUuhRA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.27kB (578339 bits) |
| Date Submitted | 2015-04-01 00:00:00 |
| Date Available | 2015-04-01 00:00:00 |
| Creation Date | 2014-06-27 17:51:40 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2015-03-12 10:43:28 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | admin |
ENGINEERING SPECIFICATION CONFIDENTIAL spacestation 2014 Revision 0.4 Drafted: 06/27/2014 Author: Steven Chou mophie Inc. Proprietary All data and information contained in or disclosed by this document is proprietary, confidential and privileged information of mophie Inc, and all rights therein are expressly reserved. By accepting this material, the recipient agrees that this material and the information contained therein is held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of mophie Inc. mophie spacestation Page 1 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL Table of Contents Changes/Revision History Approvals 1.0 PURPOSE AND SCOPE 1.1 Product Marketing Requirements – An Overview 2.0 INDUSTRIAL DESIGN REQUIREMENTS 2.1 Design Requirements 3.0 MECHANICAL DESIGN REQUIREMENTS 3.1 Hardware System Design 3.2 Mechanical Design Requirements 4.0 ELECTRICAL DESIGN REQUIREMENTS 4.1 Electrical Design Requirements 4.2 Battery Cell Requirements 10 5.0 QUALITY CONTROL PLAN 12 5.1 Quality Design Requirements 12 5.2 Environmental Test Requirements 12 5.4 Critical Dimension Requirements 12 6.0 STANDARD COMPLIANCE 13 6.1 Certifications required for this product: 13 6.2 ESD Protection 13 6.3 EMC Compliance 13 6.4 RoHS Compliance (Restriction of Hazardous Substances) 13 mophie spacestation Page 2 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL CHANGES/REVISION HISTORY Rev Date 0.1 06/10/2014 0.2 06/23/2014 Author Steven Chou Charles Kim 0.3 0.4 Steven Chou Steven Chou 06/23/2014 06/27/2014 Page(s) 7, 8 9, 10, 11 All Change Description First draft Updated ME section and added Figure 3.1 Mechanical Design Control (DC) Updated Battery Cell spec Incorporated comments from CN team APPROVALS Date Title Name Signature Product Development Manager Tyson Mackjust Director of Product Development Charlie Quong Director of Hardware Engineering Vannin Gale VP of Marketing Ross Howe SVP of Sales and Business Development Darren Shimkus Principle Shawn Dougherty or Daniel Huang mophie spacestation Page 3 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL 1.0 PURPOSE AND SCOPE 1.1 Product Marketing Requirements – An Overview Concept: The mophie spacestation combines the functionality of a mophie space pack and a mophie powerstation. The two major features are power and storage with the added benefits of the powerstation form factor (portability and universal compatibility). The product will ship with a 6000 mAH battery @ 2.4A output in variants of 32, 64, and 128GB of additional storage. As a premium product the design will be similar, yet, more premium than the powerstation w/cables 2014 line. The product will ship with BLE as well accompanying free iOS and Android apps. The current iOS “Space” app will be redesigned to work with the spacestation and a new “Space” android app will be ready at launch. Use cases The mophie spacestation has the following use cases: Supplies up to an additional 60% battery capacity for the iPad Air, 85% battery capacity for the iPad mini retina and 300% battery capacity for iPhone 5/5s Supplies additional memory capacities of 32, 64 and 128GB for tablets and smartphones Pass-through charging with priority for the connected device File transfer from the spacestation to the connected device and vice versa File management via included Application – allows for content management between devices (space pack, tablet/smartphone, PC/Macs, iOS/third party apps, cloud solutions via API) Compatible with iOS and Android tablets and smartphones Features: The following list of key features defines the basic functions of the product: Housing: Color/finish: Metal top and bottom plates/PMS Process Black Pantone Black C. mophie logo lasered Single Female USB port Single female Lightning or microUSB port (depends on SKU) LED indicator light button (to double as data on button a la space pack) May use 2x64GB microSD cards to achieve 128GB capacity (multiple slots for higher capacity) to save cost. mophie spacestation Page 4 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL Battery: 6,000 mAh Li-ion polymer battery delivers 100% additional battery (5000 mAH is stated battery size; will actually be closer to 6000) Charge indicator button 4 white LED indicators and the charge button will function as described below: o When the battery button is pressed, the white LEDs will show charge level of the device. 4 LEDs light up: 100% ~ 76% 3 LEDS light up: 75% ~ 51% 2 LEDS light up: 50% ~ 26% 1 LED: 25% ~ 11% 0 LED: 10% ~ 0% o When Unit is charged via charging port and included cable, the White LEDs will indicate level of charge. The LED duty cycle is 50% @ 1S (500mS ON and 500mS off) 4 LEDs light up: 100% ~ 76% 3 LEDS light up: 75% ~ 51% 2 LEDS light up: 50% ~ 26% 1 LED: 25% ~ 11% 0 LED: 10% ~ 0% Firmware: Approximately 10% of battery reserved for the spacestation for data only Over the air (OTA) firmware updates available (on the App) Data transfer – must be able to play HD video and audio Auto-notification to download App when spacestation is initially attached to a tablet/smartphone Files able to be viewed on tablet/smartphone directly from space station without transferring or saving of files from the space station to the tablet/smartphone When connected to a computer, it must be automatically recognized as a removable drive. If passcode feature is turned ON in the space pack firmware, when connecting to a computer, SS will not automatically recognized as a removable drive unless the user has entered the correct password. Auto-charge and auto-data connection. When a device is connected to the space station via female USB port, charging and data to be activated. Data to have 3 minute timeout period if not accessed via iOS or Android app Charging to be controllable from app. Charging can be turned on or off via the app. Pairing BLE to tablet/smartphone via app Auto-reconnect of BLE when back in range of previously connected device mophie spacestation Page 5 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL Hard button use of Power indicator light button to put spacestation in pairing mode Other: BLE to turn on spacestation data access when the app is opened up Pass-through charging with priority for tablet/smartphone Input Charging Rating: Voltage: 5V +/- 5% with Current: 1.8A Output Charging Rating: During Pass through: Voltage: 5V +/- 5% with Current: 1A During regular charging: Voltage: 5V +/- 5% with Current: 2.4A Kit contents: Gift box style packaging with window and flap with hero shot USB to Micro USB 2.0 cable Quick start guide with legal info and online link for full user manual (user manual not included in box. To be online only) spacestation One global packaging SKU for Apple and ROC (See Appendix A for languages supported) 2.0 INDUSTRIAL DESIGN REQUIREMENTS 2.1 Design Requirements Description Detailed CMF (Color/Material/Finishes) Multiple CMF Options or SKU’s? Secondary Process Required? Requirement See Figure 1 TBD Yes a) Process Black Pantone Black C.” b) Anodize Mophie LOGO (size) Device label and marking size Laser mark on Aluminum Laser etching on bottom plate Power button LED indicator Stainless polish 4 white Figure1: mophie spacestation Page 6 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL 3.0 MECHANICAL DESIGN REQUIREMENTS 3.1 Hardware System Design Number Descriptions Main Body Cover Top & Bottom, Aluminum (1.0mm 6061-T6) Power button VHB tape for adhesion 2 X 3000 mAh battery 2 PCBA Screws (mount PCBA) Thermal transfer material Conformable thermal conductive pad NOTE Refer to 3D CAD for detail mophie spacestation Page 7 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION Figure 3.1 CONFIDENTIAL Mechanical Design Control (DC) 3.2 Mechanical Design Requirements Descriptions Power button LED brightness Light leakage Ultra Sonic Weld (USW) UV paint Housing construction Requirement TBD. 0.5 to 1 lbf Cool white at 1000 lux intensity Must not be seen through nearby opening Must pass Drop Test (Refer to test plan) Must pass 2H hardness @500gf and chemical test (Refer to test plan) Must pass probe test of 20Kg for 1 minute (Refer to test plan) Housing construction Must with stand drop test and still functional. Minor crack may occur less than 1mm wide. Housing Plastic Must meet Flame retardant 94-V1 minimum (Refer to test spec) Must pass salt spray test (Refer to test spec) All metal parts and hardware’s mophie spacestation Page 8 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION All adhesive and glue Housing Plastic All metal parts and hardware’s All adhesive and glue CONFIDENTIAL Must pass thermal cycle test (Refer to test spec) Must meet Flame retardant 94-V1 minimum (Refer to test plan) Must pass salt spray test (Refer to test plan) Must pass thermal cycle test (Refer to test plan) 4.0 ELECTRICAL DESIGN REQUIREMENTS 4.1 Electrical Design Requirements Description Battery Output Voltage Input Charging Output Charging Charging (general) Syncing Compatibility Hardware Interface PCB Type (Single Sided, Double Sided Silver thru hole, Double Sided Plated thru hole, Double Sided Carbon) Power Converter Type (Input/output) ESD Protection (e.g. USB Receptacle) mophie spacestation Requirement 3.8V/cell; 6000mAh Li-ion (polymer) battery Voltage: 5.1V +/- 0.5% with Current: 1.8A Voltage: 5.1V +/- 0.1% with Current: 2.4A Pass through charging with priority for connected device Yes, data path must be allowed from input to the applicable charging device (ex. phone and tablets) Compatible with charging outlets: BC1.2, Samsung wall chargers, computer, wall and Car charger (500mA or greater) Input: USB-A connector Output: Lightning or MicroUSB Connector Double Sided Silver thru hole; 4-layer Buck/Boost; DC-DC Yes; SMD diode(s) Page 9 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION LED Power indictors CONFIDENTIAL 4 White LED indicators and the charge button will function as described below: When the battery button is pressed, the White LEDs will show charge level of the device. o 4 LEDs light up: 100% ~ 76% o 3 LEDS light up: 75% ~ 51% o 2 LEDS light up: 50% ~ 26% o 1 LEDS light up: 25% ~ 11% o No LED: 10% ~ 0% When Unit is charged via charging port and included cable, the white LEDs will indicate level of charge. The LED duty cycle is 50% @ 1S (500mS ON and 500mS off) o 4 LEDs light up: 100% ~ 76% o 3 LEDS light up: 75% ~ 51% o 2 LEDS light up: 50% ~ 26% o 1 LEDS light up: 25% ~ 11% o No LED: 10% ~ 0% 4.2 Battery Cell Requirements The table below outlines baseline requirements for the battery cell used in this product: Description Requirement Appearance The surface is clear and no scratch Maximum Cell Dimensions 74.35*51.5*11.8 mm Max Cell Dimensions(after swell) TBD TBD Weight Nominal Capacity Marked Capacity(Minimum Rated) Typical Rated capacity Charge time Nominal Cell Charge Voltage Nominal Cell Discharge (Operating) Voltage Nominal Cell Discharge Cut-Off Voltage Nominal Cell Charge Current Nominal Cell Discharge Current Basic Charging Characteristics mophie spacestation 6000mAh 6000mAh (0.5C) 6000mAh (0.5C) Approx.4 hours from input of 5V at 1.8A 4.35V±0.05V 3.8V 3.1V 3A 4.6A Charging shall consist of charging at a constant current rate of 3A until the cell voltage reaches 4.35V. The cell shall then be charged at constant voltage of 4.35V while tapering the charge current. Charging shall be terminated when the charging current has tapered to 250mA. These characteristics should stay consistent when charging the Page 10 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL call between 0°C and 40°C Overcharge Protection? Cells shall be able to discharge at a constant current of 4600mA, 3.1 V, at 23±2°C and humidity of 65±20%. 500 0.5C-discharging cycles (residue ≥ 80% of initial capacity) Yes Overcharge Detection Yes Over-Discharge Protection? Yes Over-Discharge Detection Yes Over-Current Protection? Yes Over-Current Detection Yes Overcharge Protection Test Criteria TBD Over-Discharge Protection Test Criteria TBD Short-Circuit Protection Test Criteria PCM Input Voltage’s Dynamic Range Leakage Shutdown Capability? TBD 2.7V – 4.5V Seiko S8211CAM-M5T1S (SOT23-5); Panasonic MTMC8E2A0LBF (WMini8-F1); Panasonic FC8V22040L (WMini8-F1); Analog Power AMCC920NE (DFN3x3-8L). 100% 1-month in 20±5°C& 70-80% RH Storage: 90%; 6-monthsin 20±5°C& 70-80% RH Storage: 70%; 12 months in 20±5°C &70-80% RH Storage: 50%. -10°C (70%); 0°C (80%); 25°C (100%); 45°C (95%); 60°C (90%) Required Minimum Required Declarations/Certifications Directive 2006/66/EC, MSDS, UN38.3 Basic Discharging Characteristics Nominal Cell Cycle Life Active Protection Components (Or Equivalent) Ex-Factory Cell Capacity Minimum Remaining Capacities. Shelf Time Relative Cell Capacity vs. Temperature See Battery Pack Specification for more detail. mophie spacestation Page 11 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION CONFIDENTIAL 5.0 QUALITY CONTROL PLAN 5.1 Quality Design Requirements Must meet mophie General Workmanship Standard Descriptions Requirement Gap between Cap and Main Body 0.2 mm max Part mismatch 0.1 mm max Part flash .05 mm max Paint scratch / durability See Test Plan for testing USW gap 0.1 mm Sink Mark See Standard Color match Match approved sample CMF match Match approved sample 5.2 Environmental Test Requirements Description Requirement Operating temperature range 0°C to + 40°C Storage (Non-operating) -20°C to +60°C temperature range Temperature Shock will be subjected from 0°C to 50°C for 4 cycles at a rate of 1°C per minute with a dwell time of 1 hour at high and low temperature (as shown below). Functional tests will be randomly performed while unit is inside the chamber Humidity (operating) 40±3°C, 95% relative humidity, and non-condensing for 96 hours with batteries or power. Functional tests will be randomly performed while unit is inside the chamber. Altitude Must withstand a 10,000-feet altitude test (by simulation). Packaged products must withstand a 20,000-feet altitude test (by simulation) Vibration Must withstand the vibration/stress test. The test is performed at amplitude of 3.15 mm and frequency of 7-500 Hz, for 10 minutes (per axis) Unit Drop test (transit drop) Must withstand multiple free-fall drops on a hardwood floor (e.g. a 1.00" thick oak layer) with the surface(s) or edge(s) without obstruction. See Test Plan for details Chemical resistance See Test Plan for list of chemicals and test methods 5.3 Functional Test Requirements Description Refer to test plan N/A 5.4 Critical Dimension Requirements Description 2D drawings for plastic parts Finish notes for secondary process Requirement See part prints and Incoming Quality Control (IQC) See part prints and IQC mophie spacestation Requirement Page 12 of 13 Last Update: 6/27/2014 5:51 PM ENGINEERING SPECIFICATION Assembly notes and Checklist CONFIDENTIAL See part prints and IQC 6.0 STANDARD COMPLIANCE 6.1 Certifications required for this product: Certification RoHS FCC CE C-Tick IEC60950-1 UL1642 WEEE Prop 65 (CA), KC, PSE, TISI UN38.3 Requirement Yes Yes Yes Yes Yes Yes Yes Yes Yes 6.2 ESD Protection Standard products must meet 8kV air discharge. Products that have metal casing must meet 4kV contact discharge, as well as 8kV air. All ESD tests shall be performed using the test systems as specified by the IEC 61000-4-2 2001 standard. 6.3 EMC Compliance All EMC tests shall be performed by following the IEC 61000-4-2 2001 standard. 6.4 RoHS Compliance (Restriction of Hazardous Substances) The product should be RoHS compliant. The product shall not contain any of the following six harmful substances: Lead Mercury Hexavalent Chromium Cadmium PBB (Polybrominated Biphenyl) PBDE (Polybrominated Diphenyl Ether mophie spacestation Page 13 of 13 Last Update: 6/27/2014 5:51 PM FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-701 Create Date : 2014:06:27 17:51:40-07:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2015:03:12 10:43:28+08:00 Metadata Date : 2015:03:12 10:43:28+08:00 Format : application/pdf Creator : admin Producer : Microsoft® Word 2010 Document ID : uuid:d66b6cc4-85c2-4987-b210-b55462e90405 Instance ID : uuid:9e06e2c9-0334-49fa-a8eb-48856188554d Page Count : 14 Language : en-US Author : adminEXIF Metadata provided by EXIF.tools