Nokia 770 Instruction Manual N770 UG En

User Manual: nokia 770 - Instruction Manual Free User Guide for Nokia Tablet and eReader, Manual

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

Internet Tablet OS 2006 edition
User Guide

9249449
ISSUE 3 EN

DECLARATION OF CONFORMITY
We, NOKIA CORPORATION, declare under our sole responsibility that the product
SU-18 is in conformity with the provisions of the following Council Directive: 1999/5/EC.
A copy of the Declaration of Conformity can be found at
http://www.nokia.com/phones/declaration_of_conformity/.

The crossed-out wheeled bin means that within the European Union the product must
be taken to separate collection at the product end-of-life. This applies to your device
but also to any enhancements marked with this symbol. Do not dispose of these
products as unsorted municipal waste.
Copyright © 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are trademarks of Nokia Corporation. Other product and
company names mentioned herein may be trademarks or tradenames of their respective
owners.
Nokia tune is a sound mark of Nokia Corporation.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial
activity and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from
MPEG LA, LLC. See .
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes
and improvements to any of the products described in this document without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
There may be restrictions on using Bluetooth technology in some locations. Check with your
local authorities or service provider.
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
9249449/ISSUE 3 EN

Contents
For your safety ................................
1. Overview......................................
Nokia support on the Web..................
Touch screen ...........................................

4
6
6
7

Task navigator..........................................
Application title area.............................
Status indicator area .............................
Minimize and close buttons ................
Application area......................................
Toolbar .......................................................
Calibrate the touch screen...................

7
8
8
9
9
9
9

Home view............................................. 10
Device control....................................... 11
Stylus........................................................ 11
Hardware keys ....................................... 11

Text input methods............................. 12
On-screen keyboard ............................. 13
Full-screen finger keyboard ............... 14
Handwriting recognition .................... 14

Text input settings .............................. 15
Volume control..................................... 15
Device lock ............................................ 15
Change the lock code .......................... 15
Lock touch screen and keys ............... 16

Memory management........................ 16
Memory card .......................................... 17
Back up and restore data ................... 17

Help ......................................................... 18
Search for information ...................... 19
2. Define Internet connections .... 19
WLAN connection................................ 20
Cellular connection............................. 21
Bluetooth wireless technology ......... 22
Pair a phone with your device .......... 23
Create a cellular connection ............. 23

Connectivity settings.......................... 24
Disable Internet connections............. 25

3. Browse the Web........................ 26
Open and browse Web pages........... 26
Manage bookmarks............................. 27
4. Communicate over the Web .... 27
Accounts ................................................ 28

Presence .................................................
Contacts .................................................
Instant messaging ...............................
Internet call...........................................
E-mail .....................................................

29
29
30
31
32

Retrieve and read e-mail....................
Create and send e-mail ......................
Inbox folder............................................
Outbox folder.........................................
Sent folder..............................................
Drafts folder...........................................

33
34
34
34
35
35

5. Media players and viewers....... 35
Audio player.......................................... 35
Internet radio........................................ 36
Video player .......................................... 36
RSS feed reader.................................... 37
Images .................................................... 37
6. Tools........................................... 38
Application manager .......................... 38
Connection manager .......................... 38
Control panel ........................................ 38
File manager ......................................... 40
7. Utilities and games................... 40
Calculator .............................................. 40
Clock........................................................ 40
Notes....................................................... 40
PDF reader ............................................. 40
Sketch ..................................................... 41
Games ..................................................... 41
8. PC connectivity ......................... 41
Software update .................................. 42
9. Battery information.................. 42
Charging and discharging................. 42
Nokia battery authentication
guidelines............................................... 43
Care and maintenance .................. 45
Additional safety information...... 46
Open source software notice........ 48

For your safety

For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY

Do not switch the device on when wireless device use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE

All wireless devices may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical
equipment.
SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELING

Do not use the device at a refueling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is in
progress.
USE SENSIBLY

Use only in the normal position as explained in the product
documentation.
QUALIFIED SERVICE

Only qualified personnel may repair this product.
ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect
incompatible products.

For your safety
WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.
BACK-UP COPIES

Remember to make back-up copies or keep a written record of all
important information.
CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.

■ About your device
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, the device must be
switched on. Do not switch the device on when wireless device use may
cause interference or danger.

■ Network services
Contact your service provider for additional instructions for the use of network
services and information on what charges will apply. Some networks may have
limitations that affect how you can use network services.
Your service provider may have requested that certain features be disabled or not
activated in your device. Your device may also have been specially configured.

■ Shared memory
The following features in this device may share memory: bookmarks; image,
audio, and video files; notes, sketch, and other files; contacts; e-mail messages;
and applications. Use of one or more of these features may reduce the memory
available for the remaining features sharing memory. For example, saving many
images may use all of the available memory. Your device may display a message
that the memory is full when you try to use a shared memory feature. In this case,
delete some of the information or entries stored in the shared memory features
before continuing.

Overview

1. Overview
The Nokia 770 Internet Tablet provides easy broadband access to the
Internet through a WLAN/Wi-Fi or Bluetooth connection with
compatible mobile phones. Its wide screen and portable size make it
optimal for enjoying the Web and Internet communications away from
your laptop or desktop.
Your compatible WLAN access point must be compliant with the IEEE
802.11b or 802.11g standard.
Read this user guide carefully before using your device. Read also the
quick start guide provided with the device and the user guide of your
compatible Nokia phone, which provides important safety and
maintenance information.

■ Nokia support on the Web
Check www.nokia.com/support or your local Nokia Web site for the
latest version of this guide, additional information, downloads, and
services related to your Nokia product.
Check also www.nokia.com/770 to explore the Internet Tablet online
features.

Overview

■ Touch screen

The touch screen consists of the task navigator (1), the application title
area (2), the status indicator area (3), the minimize and close buttons
(4), the application area (5), and the toolbar (6).

Task navigator
The task navigator (1) includes icons that you can tap to open different
applications, start new tasks, and access bookmarks.
To select an option, tap it with the stylus. Alternatively, scroll to the
desired option in a menu, and press the center of the scroll key to open
it. To close the menu, press the escape key, or tap another area of the
screen.
The task navigator contains the following plug-ins by default:
1st plug-in: Web browser — Tap to access Internet functions such as
Open new browser window and Bookmarks. To change the first plug-in,
tap , and select Tools > Control panel > Task navigator.
2nd plug-in: Contacts — Tap
to access functions such as
View contacts, View inbox, New e-mail, New call, New chat, and
Set presence. The information at the bottom of the menu changes
automatically. The plug-in icon is highlighted and the menu is updated
Copyright © 2006 Nokia. All rights reserved.

Overview

whenever you receive new chat messages, authorization requests and
responses, or group chat invitations. You cannot change the plug-in.
Applications — Tap
for access to all installed applications. To change
the structure of the menu, select Tools > Control panel >
Task navigator.
Application switcher — The task navigator also contains icons related
to the applications that are open. The icons of the top four applications
are shown on the task navigator; the rest are listed in a separate menu.
To restore one of the four applications, tap the icon of the application. If
you hold the stylus down on an icon for half a second, a tool tip is
shown.
To access the menu of all open applications, tap
, or press and hold
the home key. To open an application, tap the name. To return to the
home view of the device, select Home.

Application title area
The application title area (2) displays the name of the active application
and the name of the currently open file. To open the application menu,
tap the title, or press the menu key.

Status indicator area
Tap the icons in the status indicator area to get more information or
perform tasks related to a specific function. The status indicator area (3)
may contain the following icons:
indicates that you have set an alarm in the Clock application.
indicates that the device is connected to a PC through a USB cable.
The presence icon indicates your presence status and allows you to
adjust the presence settings. The icon is visible only after you have
created an account for Internet call and instant messaging service.
indicates that you are online, that you are away, that you are
invisible, or that you are offline.
indicates the level of display brightness and allows you to adjust the
display settings.

Overview

indicates the volume level and allows you to adjust the master
volume and other sound settings. The more bars the icon contains, the
higher the volume. When the sounds are muted, the icon is .
The Internet connection icon indicates the status and type of the
Internet connection and allows you to open and close an Internet
connection.
indicates that a WLAN connection is active,
that a
packet data connection (for example, GPRS) is active,
that a data
call connection (for example, GSM data call) is active, that there is
no Internet connection, or
that the device is in the offline mode
where no connections are allowed.
indicates how much charge is left in the battery. The more bars the
icon contains, the more charge is left.

Minimize and close buttons
Every application has the minimize and close buttons (4).
If you tap
, the current application is hidden and the underlying
application is shown. To bring the minimized application back to the
top, tap its icon in the application switcher.
If you tap
, the current application view closes. To close an
application, you can also select Close from the application menu or
press the escape key for a second.

Application area
The application area (5) shows the applets you selected in the Home
menu. To add or remove applets from the application area, select
Home > Select applets..., and mark or unmark the desired applet. If you
open an application from the task navigator, the application is displayed
in the application area.

Toolbar
The toolbar (6) contains the command buttons of the active application.

Calibrate the touch screen
If the touch screen of the device responds inaccurately, you may need to
calibrate it. Press the home key, select Home > Tools >
Screen calibration, and follow the instructions on the screen.
Copyright © 2006 Nokia. All rights reserved.

Overview

Note: A small number of missing, discolored, or bright dots may
appear on the screen. This is a characteristic of this type of
display. Some displays may contain pixels or dots that remain
on or off. This is normal, not a fault.

■ Home view
When you switch on the device, the home view is displayed. The home
view contains various applets that you can open, close, and rearrange.
You can also install new applets using the Application manager.
The following applets are available in your device:
Clock — Displays the time in digital or analog format. The date format
depends on the regional settings. To set the time and date, tap the clock,
and select Clock > Tools > Date and time settings....
Internet radio — Select an Internet radio channel from the playlist. The
content of the playlist comes from your favorite playlist, which you can
edit in the Audio player application.
RSS feed reader — Shows the number of unread news articles and lists
the latest headlines when you subscribe to a news service. To view an
article, tap its headline. To refresh the article list from the Web, tap .
To stop the refresh, tap
.
Speed contacts — Allows you to quickly get in contact with a selected
group of people. To select the contacts to be displayed on the applet,
select Home > Applet settings > Speed contacts.
Web shortcut — To set the Web page that opens when you tap the
shortcut image, select Home > Applet settings > Web shortcut. The
functions of this feature may vary depending on the product package.
To set the background image for the home view, select Home > Tools >
Set background image.... The background may display a solid color, an
image, or both.
To personalize the look and feel of your device, select Home > Tools >
Personalisation....

Overview

■ Device control
You can control the device in two ways: tap the screen with the stylus,
or press the scroll key and other keys on the device.

Stylus
To open an application, tap an icon in the task navigator. Select the
desired function from the menu next to the icon.
To close an application, tap

in the top-right corner of the screen.

• Single tap — To activate controls and other interactive interface
components, tap them once with the stylus (stylus down and up on
the same object). A single tap may open a list, activate a button in a
dialog or a link on a Web page, select a check box, and activate a text
input method from a text field.
• Highlight and activate — To highlight an item, tap it once with the
stylus. To activate or open the item, tap it again. Highlight and
activate items in list and grid views, for example, to copy, move, or
delete files and folders.
• Continuous multiple selection — To select consecutive items, place
the stylus on a non-focused item, and drag the stylus over the items.
• Drag and drop — To drag an item, hold the stylus down on a
highlighted item, drag the item to its new location, and release the
stylus. To drag and drop multiple items, perform a continuous
multiple selection, and start the drag from the highlighted item.
• Context-sensitive menus — To activate a context-sensitive menu,
hold the stylus down on an item for a second.

Hardware keys
A keypress refers to the press and release of a key. Some actions depend
on the length of the keypress.
• Power key — A short keypress opens the Device mode dialog. A long
keypress turns the device on or off.
• Zoom key — A short keypress changes the zoom level of the current
view, and adjusts the volume in audio applications.

Overview

• Full-screen key — A short keypress switches between full screen and
normal screen modes.
• Scroll key — A short keypress moves the focus from one item to
another in the respective direction. A long keypress in the Web
browser scrolls the content of the active page or frame. Press the
center of the scroll key to activate the highlighted item, and to
accept confirmation notes.
• Escape key — A short keypress removes the cursor from text fields,
cancels menus and dialogs, and rejects confirmation notes. A long
keypress closes the topmost dialog or application view. In the Web
browser this key acts as a back button.
• Menu key — A short keypress opens and closes the application menu.
• Home key — A short keypress opens the home view of the device. A
long keypress activates the application switcher.

■ Text input methods
You can enter letters, numbers, and special characters in two ways. The
keyboards allow you to tap characters with the stylus or your fingers.
Handwriting recognition allows you to write characters directly onto
the screen using the stylus as a pen.
To begin text input, tap any text field with the stylus or your fingers. The
text input area appears on the touch screen and displays one of the
keyboards or the handwriting recognition area, depending on the
previously used text input method.
To switch between text input methods, tap
on the keyboards or
handwriting recognition view, and select Input method and the desired
option. Start writing.
Your device can complete words based on the built-in dictionary for the
selected text input language. The device also learns new words from
your input.

Overview

On-screen keyboard

• Tabulator key (1) — Adds a tabulator space or moves the cursor to the
next available text input field.
• [ABC] (2) — Locks the uppercase characters of the keyboard. In the
handwriting recognition mode, switches between the normal and
special character recognition modes.
• Shift key (3) — Enters an uppercase character in the on-screen
keyboard mode when you write in lowercase. When you tap this key
in the handwriting recognition mode, the last lowercase character
switches to uppercase, and vice versa.
• Input menu key (4) — Opens the text input menu, which includes
commands such as Edit > Copy, Cut, and Paste.
• On-screen keyboard (5)
• Space bar (6) — Inserts a space.
• Numeric keyboard (7)
• Backspace key (8) — Deletes the character to the left of the cursor.
• Enter key (9) — Moves the cursor to the next row or text input field.
Additional functions are based on the current context (for example,
in the Web address field of the Web browser, it acts as a go button).
• Special character key (10) — Opens a view, in which you can select
from commonly used special characters, symbols, and language
character accents.
• Close (11) — Closes the on-screen keyboard and handwriting
recognition input area, and saves changes.

Overview

Full-screen finger keyboard
To begin text input with the finger keyboard, tap the text input field
with your fingers. The finger keyboard opens in the full screen mode.
The finger keyboard displays buttons and functions similar to the other
text input methods; however, not all of the special characters are
available.
To close the finger keyboard, tap
keyboard.

in the upper right corner of the

To change the finger keyboard settings, tap
Control panel > Text input settings > Finger.

, and select Tools >

When using the finger keyboard, use only clean hands and regularly
clean the touch screen by wiping the screen gently with a dry, soft cloth.

Handwriting recognition
You can use the stylus as a pen to write text. Write legible, upright
characters on the text input area, and leave a small horizontal gap
between each character. Do not use cursive writing.

To write common characters and numbers (default mode), write words
as you normally write them.
To write special characters, tap [Abc1] in the left pane of the input area,
and write the characters as you normally write them.
To insert new characters in and after words, draw them in the intended
positions.
To teach the device your handwriting style, tap
keyboard, and select Tools > Teach.

on the on-screen

To use handwriting gestures, see the figure.
Draw gesture 1 for a backspace or gesture
2 for a space.

Overview

■ Text input settings
To define the text input settings, tap
Control panel > Text input settings.

, and select Tools >

Word completion: is turned on by default. To turn word completion off,
clear the selection. When word completion is on, the device displays
word candidates that match the first characters of the word that you
enter with the on-screen keyboard or write by hand.

■ Volume control
To adjust the master volume, tap
to access the sound settings. To
decrease or increase the volume, drag the volume slider to the desired
position. The master volume overrides all other volume settings in the
device.
Warning: Listen to music at a moderate level. Continuous
exposure to high volume may damage your hearing. Do not
hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.

■ Device lock
To prevent unauthorized use of your device, change the lock code, and
set the device to automatically lock after a certain time-out period.
To lock the device, briefly press the power key, select Lock device, and
tap OK. If you have not set the lock code, you are asked to do so.
To unlock the device, enter the lock code, and tap OK.
To edit the device lock settings, tap
Control panel > Device lock.

, and select Tools >

To set the time-out period, tap Lock device after, and select the desired
time.

Change the lock code
To change the lock code, do the following:
1. Tap , and select Tools > Control panel > Device lock >
Change lock code.
Copyright © 2006 Nokia. All rights reserved.

Overview

2. Enter the current lock code (the default code is 12345), and tap OK.
3. Enter the new code, and tap OK.
4. Enter the new code again, and tap OK.
If you tap Cancel in any of these dialogs, the device lock code is not
changed.
Keep the new code secret and in a safe place separate from your
device.
Note: If you lose the device lock code, you must take the device
to a Nokia authorized service facility. To unlock the device, the
software must be reloaded, and all data you have saved in the
device may be lost.

Lock touch screen and keys
To lock the touch screen and keys, briefly press the power key, and select
Lock touch screen and keys > OK. To unlock the touch screen and keys,
press the power key and the center of the scroll key.

■ Memory management
To view current memory consumption, tap
Control panel > Memory.

, and select Tools >

To view the amount of free and used memory, and the memory
consumption of different items on your device or memory card, select
the Device or Memory card page.
To use the memory card as additional virtual memory for running
applications, open the Virtual page, and select Extend virtual memory.
Additional virtual memory is always tied to the memory card that you
are currently using.
Important: Do not remove the MMC card in the middle of an
operation when the card is being accessed. Removing the card
in the middle of an operation may damage the memory card as
well as the device, and data stored on the card may be
corrupted.

Overview

To free memory, delete data in File manager or other applications. To
find and delete files of a certain size, use the Search application.
The applications display error messages when you try to move, copy, or
save files, and when there is not enough memory on the device or the
memory card.

Memory card
You can only use FAT 16/32 formatted memory cards with this device.
To view and manage the contents of the memory card, tap , select
File manager, and tap the memory card icon in the folder list.
To rename a memory card, select File manager > Memory card >
Rename....
To format a memory card, select File manager > Memory card >
Format.... All data is permanently deleted from the memory card. Tap
Format.

Back up and restore data
You can back up data to a memory card and restore it, if necessary. The
backup appears as a folder on the memory card. You can also secure the
backups with a password.
To back up data, do the following:
1. Tap

, and select Tools > Control panel > Backup/Restore > Backup.

2. In the Backup selection dialog, change the name of the backup; tap
the name, and enter a new one.
3. In the Data selection dialog, select whether you want to back up all
data or only the specified data types. You cannot make back-up
copies of applications you have installed.
To protect the backup with a password, tap Protect with password,
enter twice the password you want to use, and tap OK.

Overview

To restore data, do the following:
1. Tap

, and select Tools > Control panel > Backup/Restore > Restore.

2. In the Restore selection dialog, select the backup on the memory
card that you want to restore. Tap OK and Restore.
If you have protected the backup with a password, the
Password needed dialog is displayed. Enter the password, and tap OK.
Important: Always back up both e-mail settings and messages.
To ensure that the E-mail application works as it should, restore
its backup when no settings or e-mail messages are present in
the application, for example, directly after updating the
software on your device.

■ Help
Your Nokia 770 Internet Tablet offers device help, which provides
additional information on the features, applications, and dialogs of the
device.
To access help from the task navigator, tap

, and select Help.

To access help from an application, tap the application title, and select
the help command from the menu (usually under the Tools menu).
To browse help topics, tap the following:
or
to see other help topics if you have recently viewed several
help topics.
to see a list of recently viewed help topics.
to search for the text that you have entered in the search field.
To access help related to the contents of a dialog (context-sensitive
help), tap the [?] button on the dialog.

Define Internet connections

■ Search for information
To search for items you created or downloaded on your device, do the
following:
1. Tap

, and select Search.

2. Enter a search word or multiple search words. The more search words
you use, the more accurate the search results.
3. If needed, limit the search to e-mail messages, contacts, or
bookmarks; or select all items on your device. To set additional
search options, tap Options.
4. To start the search, tap OK. Results appear in the Search results
window.
To stop the search at any time, tap

on the toolbar.

The search function in your device operates with Boolean AND logic. The
more search words and options you set, the more accurate the search
results. If you get too few results, limit the number of search words and
options. The search function is not case-sensitive.

2. Define Internet connections
Your device allows you to access the Internet by two different means:
through a wireless local area network (WLAN), or a cellular phone that
supports Bluetooth wireless technology.
To define Internet connections, tap , and select Tools >
Control panel > Connectivity > Connections > New. The welcome page
of the Internet setup wizard is displayed. Tap Next to proceed to the
Connection setup: Name and type dialog.

Define Internet connections

■ WLAN connection
To set up a WLAN connection, do the following:
1. In the Connection setup: Name and type dialog, define the following
settings:
Connection name — Enter a descriptive name for the connection.
Connection type: — Select WLAN.
2. Tap Next. The device asks whether you want to scan for available
WLAN networks. Tap Yes to start the scan, or No to skip it.
If you select Yes, all available WLAN networks are shown after the
scan with information about each WLAN connection:
• Security level of WLAN connection:
— No security (for example, a public access point in an
airport)
— Medium security (wired equivalent privacy (WEP)
authentication)
— High security (Wi-Fi protected access (WPA)
authentication, including WPA1 and WPA2).
The security level of the network affects the settings that are
shown when you tap Next.
• Name of the WLAN network
• WLAN signal strength
•

if the WLAN network is already defined for an Internet
connection setup that you have saved in the device

3. Tap Finish to save the settings. To define advanced settings, tap
Advanced.
Tip: You may need to define advanced settings, for example, if
your Internet access point requires the use of proxies.
The following settings are shown when you edit and existing WLAN
connection, or when you skip the scan for WLAN networks in step 2:
Network name (SSID) — Enter the name of the WLAN network. If you are
the administrator of the network, ensure that the name of the network
20

Define Internet connections

is unique. When you connect to the Internet over WLAN, the connection
is based on this information. If the field is dimmed and cannot be edited,
the scanned SSID contains characters entered in an unknown character
set, and not UTF-8 as the device expects.
Network is hidden — You must select this option if the name of your
WLAN network is hidden. When this option is selected, your device
actively searches for the hidden WLAN network when you establish an
Internet connection.
Network mode — Select the Infrastructure or Ad hoc mode. The
infrastructure mode is used with the Internet connections.
Security method — Select None (no security), WEP (medium security),
WPA pre-shared key (high security), or WPA with EAP (high security).
Important: Always enable one of the available encryption
methods to increase the security of your wireless LAN
connection. Using encryption reduces the risk of unauthorized
access to your data.
Tip: The device supports wired equivalent privacy (WEP) with
key lengths of 40 or 104 bits (equal to 64 and 128 bits
depending on the WLAN access point manufacturer).
For example, in the access point, select ASCII 40/64 bits and
enter 5 characters. In the device, select correspondingly 40 bits
and enter the same 5 characters.
Some places, like France, have restrictions on the use of wireless LAN.
Check with your local authorities for more information.

■ Cellular connection
Before you can connect to the Internet over a cellular network, you must
do the following:
• Subscribe to the desired data service with your cellular service
provider
• Acquire proper Internet settings from your cellular service provider

Define Internet connections

Tip: Your device includes a settings database with
predefined settings of some cellular operators. Select your
operator from the list, and the settings are installed on your
device. To access the database, tap , and select Tools >
Control panel > Control panel > Tools >
Mobile operator setup wizard....
Note: All cellular operators and settings are not listed, and
some settings may also be out of date.
• Pair a compatible mobile phone with your device. Your device needs
an external modem (phone), which is connected to your device with
Bluetooth wireless technology.

Bluetooth wireless technology
This device is compliant with Bluetooth Specification 1.2 supporting the
following profiles: Dial-Up Networking, File Transfer/Object Exchange,
Generic Access, SIM Access, and Serial Port.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
Features that use Bluetooth technology, or allowing such features to
run in the background while using other features, increase the demand
on battery power and reduce the battery life.
A Bluetooth connection does not require that the compatible phone and
the Nokia 770 Internet Tablet be in line of sight, but both devices should
be within 10 meters (32 feet) of each other. Connections can be subject
to interference from obstructions, such as walls or other electronic
devices.
Your device always operates in nondiscoverable and nonconnectable
mode, and is not visible to other devices through the Bluetooth
connection, unless you create such connection. Do not create
connections to Bluetooth devices you do not trust.

Define Internet connections

Pair a phone with your device
You must always start the pairing of devices from your Nokia 770
Internet Tablet. Although you can only use one phone at a time, you can
pair several phones with your device.
To pair a phone with your device, do the following:
1. Activate Bluetooth connection on your mobile phone.
2. Tap , and select Tools > Control panel > Phone > New. The
Select phone dialog opens, and your device begins to search for
compatible Bluetooth devices.
3. Select the desired phone from the list of found devices, and tap
Select. Your device generates a passcode.
4. In the Pair with phone dialog, use the generated passcode or replace
it with a passcode of your own. Tap OK, and enter the same passcode
on your phone.
5. Tap Finish to save the settings.
Tip: Set your Nokia 770 Internet Tablet as a trusted device from
the Bluetooth menu of your phone. This way you allow your
device to access your phone, and you do not have to confirm the
connection every time you activate it. For more information, refer
to the user guide of your phone.
If you change the Bluetooth name of your phone, it is not
updated to your device automatically. To update the name, pair
the device with your phone again.

Create a cellular connection
1. In the Connection setup: Name and type dialog, define the following
settings:
Connection name — Enter a descriptive name for the connection.
Connection type: — Select the type of network service over which
you want to access the Internet. To use a packet-switched data
service in a cellular network, such as GPRS (network service), select
Packet data. To use a circuit-switched data service in a cellular

Define Internet connections

network, such as HSCSD (high-speed circuit-switched data; network
service), select Data call.
2. In the Cellular network dialog, select the type of cellular network
over which the Internet connection takes place: GSM/UMTS or
CDMA. You must select the network manually if you have not paired
a mobile phone with your device.
3. In the connection setup dialog, define the following settings:
Tip: It is common in GPRS packet data networks that the
access point name is Internet or it is left blank, the dial-up
number is *99#, and the user name and password may be left
blank. For CDMA packet data network settings, contact your
service provider.
Access point name — Enter the name of the Internet access point.
Obtain the name from your Internet service provider. This setting is
only shown if you selected packet-switched data connection (such
as GPRS) and your phone uses a GSM cellular network.
Dial-up number — Enter the modem telephone number of the
Internet access point.
User name — Enter a user name, if required. The user name is usually
provided by the Internet service provider.
Password — Enter a password, if required. The password is usually
provided by the Internet service provider.
Prompt password at every login — Select this option if you want to
enter your password every time you log on to an Internet server, or if
you do not want to save your password in the device.
4. When you are finished, tap Advanced in the
Connection setup: Complete dialog to define advanced settings, if
necessary. For more information, see the help of the application.

■ Connectivity settings
When you access an application that requires an Internet connection,
the device uses the WLAN connections you have saved by default. If you

Define Internet connections

have not saved any connections or they are unavailable, you are asked
to select the connection (Internet access point) you want to use.
In the Select connection dialog, select a connection from the list, and
tap Connect. Only available connections are shown, and the
connections you have saved in your device appear at the top of the list.
To define the settings of Internet connections and access points, tap
and select Tools > Control panel > Connectivity.

On the General page, define the following settings:
Connect without asking — Select which connections are used without
asking when connection is needed. This setting applies only to networks
and connections you have saved in your device.
On the Idle times page, select the time after which the Internet
connection ends automatically if the connection is not used. Use
Packet data idle time for packet-switched data connections (such as
GPRS), Data call idle time for circuit-switched data calls (such as GSM
data call), and WLAN idle time for connections created through a WLAN
access point.
Note: Time-based charges may apply to the Internet
connections. Check with your service provider, and adjust the
idle times accordingly.
Note: The network may also have idle timers that may cause
the Internet connection to break, regardless of the idle timers of
the device.

Disable Internet connections
To disable WLAN and Bluetooth connections, briefly press the power
key, select Offline mode, and tap OK. To enable connections, briefly
press the power key, select Normal mode, and tap OK.
Note: In the offline mode, you cannot use features that require
network or Bluetooth connection. To use the features, you must
first set the device back to normal mode. If the device has been
locked, enter the lock code.

Browse the Web

3. Browse the Web
To open the browser, tap
bookmark.

, and select Open new browser window or a

Before you can connect to the Internet, you must define the proper
Internet connection settings. For detailed instructions, see
"Define Internet connections," p. 19.
Important: Use only services that you trust and that offer
adequate security and protection against harmful software.

■ Open and browse Web pages
To open a Web page, tap the address field at the bottom of the screen,
enter the address with the on-screen keyboard, and tap
.
If you saved a bookmark of a Web page that you want to visit, tap
and select the desired bookmark.
To reload the page, tap

. To stop loading the page, tap

To browse and scroll a Web page, drag a page in the desired direction
with the stylus, use the scroll keys, or drag the scroll bars on the right
side and bottom of the screen.
To browse recently visited pages, tap

Note: A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed
are stored in the cache. To empty the cache, select
Web > Tools > Clear > Cache. The cache memory is also cleared
automatically whenever you close the Web browser.
To view a page in a larger or smaller size, tap the zoom key. To select a
predefined zoom level from the application menu, select Web > View >
Zoom and the desired zoom level.
To view the Web page in full screen size, press the full screen key. To
return to normal view, press the full screen key again.

Communicate over the Web

To view the Web page in optimized size, select Web > View >
Optimised view. The Web page is fit to the width of the screen; text and
images are zoomed and scaled differently, if necessary.
To change the Web browser settings, select Web > Tools > Settings. For
more information, see the help of the application.

■ Manage bookmarks
To manage the bookmarks you saved in the device, tap , and select
Bookmarks. The bookmark folders are shown on the left, and the
bookmarks in the selected folder on the right.
Note: Your device may have some bookmarks loaded for sites
not affiliated with Nokia. Nokia does not warrant or endorse
these sites. If you choose to access them, you should take the
same precautions, for security and content, as you would with
any Internet site.
You may not be able to edit or manage the contents of the
Internet service provider’s bookmarks.
To open a folder and a bookmark contained in it, tap the folder, and tap
the bookmark twice.
To add a bookmark to the current Web page, hold the stylus down on the
Web page, and select Add bookmark... from the context-sensitive menu.
To save a link as a bookmark, hold the stylus down on the link for a
second, and select Add link to Bookmarks....

4. Communicate over the Web
To be able to communicate over the Web, you must have an active
network connection and registered user accounts and passwords for
Internet call, instant messaging and e-mail services with service
providers outside Nokia.

Communicate over the Web

You can have multiple accounts for Internet call and instant messaging
services. By default, your device supports the Jabber and Google Talk
services.
Note: It is recommended to use WLAN connection for Internet
calls, because cellular connection is dependent on networks.

■ Accounts
To access the account setup wizard, tap
Control panel > Accounts > New.

, and select Tools >

To complete and save the account settings, do the following:
1. Account setup: Welcome — Tap Next to begin the account setup.
2. Account setup: Service — Select the desired service from the list, and
tap Next.
3. Account setup: Select — When you select the Jabber or Google Talk
service, you are asked to confirm whether you want to start using an
existing Jabber or Google Talk account with this device, or create a
new account. If you select to create a new Jabber or Google Talk
account, you need an active Internet connection, because you
register the new account online.
4. Account setup - User name, define the following settings:
User name — Enter the user name for the account. If you are defining
a Google Talk user name, enter the full Gmail user name (everything
before @gmail.com).
Password — Enter a password for the account.
Verify password — Enter the password again. This option is only
available if you selected to create a new Jabber account.
To define the advanced settings for the selected account, tap
Advanced. This option is not available for all accounts. For more
information on the accounts, see the help of the application.
To save the account settings, tap Finish.

Communicate over the Web

To edit the settings of an account, set your presence status to Off, select
the account, and tap Edit. To delete an account, select the account, and
tap Delete.

■ Presence
Presence is a network service that allows you to share your presence
status with those who have access to the service and request it.
When you create and register an account for Internet call and instant
messaging service, your presence status is connected to that account.
Your presence status can be On, Away, Invisible, or Off.
To change your presence status, tap
To define your presence settings, tap
Control panel > Presence.

on the status indicator area.
, and select Tools >

■ Contacts
Use Contacts to manage contact information and start communications
with your contacts. Tap
, and select View contacts.
The main view of Contacts displays the contact information in two
panes. The group pane on the left lists available groups, and the content
pane on the right shows the contacts of a selected group and the
presence status of the contacts.
To add a contact, select Contacts > Contact > New contact....
To group contacts, drag them into the desired groups. You can assign a
contact to many groups, and a group can contain many contacts.
To create a new group of contacts, select Contacts > Group >
New group.
To search for a contact, tap
in the lower right corner of the screen.
Enter the search words, and tap
.
To start communicating with a contact, select a contact from the list,
and tap it with the stylus. In the Contact dialog, tap an available
channel for communication:
to give a call to the contact

Communicate over the Web

to chat with the contact
send an e-mail message to the contact
Tip: To be able to make contact, you must define account
settings for the Internet call and instant messaging services. For
more information, see "Accounts," p. 28.

■ Instant messaging
Instant messaging application allows you to instantly communicate
with people over the Internet. To be able to use this feature, you must
have and active network connection, a registered instant messaging
account with a service provider, and a presence status that allows
sending and receiving messages. By default, your device supports the
Jabber and Google Talk services.
To access the Instant messaging application, tap
New chat.

, and select

To create an account for instant messaging services, tap the application
menu title, and select Tools > Accounts.... Follow the instructions on the
screen to complete and save the account settings.
To enter a chat room, tap the application menu title, and select Chat >
Enter chat room.... In the Enter chat room dialog, enter the name of the
chat room in the Room name field, or select the room from the list. To
join the chat room, tap OK.
If the chat room is protected by a password, the Enter password dialog is
displayed. To join the protected chat, enter the correct password, and
tap OK.
To write and send a chat message, tap the text field in the chat toolbar,
enter the message, and tap
.
To add smileys to your messages, tap

To view other messages, scroll the list with the stylus. The most recent
message is always displayed at the bottom of the list.
To end the chat, tap

in the upper right corner of the screen.

Communicate over the Web

■ Internet call
Internet call is based on the voice over Internet protocol (VoIP) that
allows you to make and receive calls over the Internet. To be able to use
this feature, you must have an active network connection, a registered
Internet call account with a service provider, and a presence status that
allows receiving calls (On or Away).
Important: Emergency calls are not supported.
To access the Internet call application, tap

, and select New call.

To create an account for Internet call service, select Internet call >
Tools > Edit accounts.... Follow the instructions on the screen to
complete and save the account settings.
To make a Internet call, select Internet call > Internet call > New.... After
you select a contact and start the call, a call request is sent to the call
recipient. If the recipient accepts the call request, the call is activated.
You can only have one Internet call at a time. No group or conference
calls are possible.
The Incoming call dialog is displayed when you receive a notification of
an incoming Internet call. To answer the call, tap . To reject the call,
tap
. To silence the call, tap
. To block the call, tap
, and
select Block caller. All incoming call requests from that caller are
rejected, and you receive no indication of them.
To adjust the volume of an Internet call, drag the volume slider with the
stylus. To mute a call, tap
below the volume slider. When the call is
muted, you can listen to what the other person is saying, but that person
cannot hear your voice. To unmute the call, tap the icon again.
Warning: Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely
loud.
To end an Internet net call, tap
. When you end a call, a call summary
is displayed, and you are given some options.

Communicate over the Web

All incoming calls you miss are registered in a log. The log remains in the
device as long as the device is powered on. If the device is rebooted, the
log is deleted.

■ E-mail
To be able to send and receive e-mail messages, you must have an active
Internet connection and a registered e-mail account with a service
provider. For appropriate settings, contact the service provider that
offers the e-mail service.
To create a new mailbox, do the following:
1. Tap

, and select View inbox. The mailbox setup wizard opens.

If you already saved settings for a remote mailbox, select
E-mail > Tools > New account... to create a new mailbox.
2. In Account setup 1/4, define the following settings:
Account name — Enter a descriptive name for your mailbox.
Account type — Select the e-mail protocol that your e-mail service
provider recommends. This setting can be selected only once and
cannot be changed after you save the mailbox settings or exit the
wizard. Tap Next.
3. In Account setup 2/4, define the following settings:
Name — Enter your name. The name is shown in the sender field of
the messages that you send.
User name — Enter your user name given to you by your e-mail
service provider. The user name is needed when you log in to your
mailbox.
Password — Enter your password. The password is needed when you
log in to your mailbox. If you leave this field empty, you are prompted
for a password when you try to connect to your mailbox on the
e-mail server.
E-mail address — Enter the e-mail address given to you by your
e-mail service provider. The address must contain the @ character.
Replies to your messages are sent to this address. Tap Next.

Communicate over the Web

4. Account setup 3/4 — Define the following settings:
Incoming server — Enter the host name or IP address of the POP3 or
IMAP4 server that receives your e-mail.
Outgoing server (SMTP) — Enter the host name or IP address of the
server through which your e-mail is sent. Tap Next.
Simple mail transfer protocol (SMTP) servers are used when sending
e-mail. To be able to send e-mail, you must define the SMTP host
name or IP address, which you obtain from the service provider of the
connection you use.
Use connection-specific SMTP servers: — Select this option if you
want to use connection specific SMTP servers for sending e-mail
messages.
Tip: The SMTP host name or IP address may be different from
the host name or IP address of the incoming server (POP3 or
IMAP4). For example, when you access your Internet service
provider e-mail over a cellular network, you may need to
utilize the SMTP server of the cellular network. Thus, you may
need to configure as many mailboxes as you have Internet
access networks, each mailbox having a different SMTP host
name or IP address.
5. In Account setup 4/4, tap Finish to complete the mailbox setup, or
Advanced to define optional e-mail settings.

Retrieve and read e-mail
E-mail sent to you is not automatically received by your device, but by
your remote mailbox on the e-mail server. To read your e-mail, you must
first connect to the mailbox and retrieve the e-mail messages to your
device.
To retrieve e-mail from a remote mailbox, select E-mail > E-mail >
Send & receive. Select to retrieve e-mail from all mailboxes or from a
selected mailbox. If you have e-mail in the Outbox folder, these
messages are sent simultaneously.
To open a message, tap twice the header of the message you want to
read.
Copyright © 2006 Nokia. All rights reserved.

Communicate over the Web

Important: Exercise caution when opening messages. E-mail
messages may contain malicious software or otherwise be
harmful to your device.

Create and send e-mail
To create a new e-mail message, do the following:
1. Tap

, and select New e-mail.

2. Write the recipient’s e-mail address. Add a semicolon (;) to separate
multiple recipients. If the recipients are in Contacts, tap , and
select the recipients from the list.
3. Fill in the subject, and write the message. To send the message, tap
.

Inbox folder
The Inbox folder contains received messages. The headers of unread
messages are shown in bold.
To send a new message, tap
. To reply to a message, tap
. To send
a reply to the sender of a message and to the recipients in the CC field,
tap
. To forward a message, tap
. To delete a message, tap
. To
send all unsent messages and receive all new messages, tap
.
To search for a message, select E-mail > Tools > Search e-mails....

Outbox folder
Messages waiting to be sent are saved temporarily in the Outbox folder.
The status of each message is shown next to the message header:
On request — The message is sent only if you tap the message and

Suspended — The sending of the message was canceled using the
Cancel sending function.
Failed — The message could not be sent.
Waiting — The message will be sent the next time you connect to your
mailbox.

Media players and viewers

To send the selected message again, tap
the selected message, tap
.

.To cancel the sending of

Sent folder
After a message is sent, it is moved to the Sent folder.
To specify the settings of the Sent folder, select E-mail > Folders >
Folder settings.... Define the following:
Sent folder clean-up on: — Select this option to allow automatic
deletion of sent messages.
Remove messages older than: — Select how often the sent messages are
deleted.
Select time: — Select how the interval for deletion is measured: in days,
weeks, or months.

Drafts folder
In the Drafts folder, you can save unfinished messages or messages that
you want to send later.

5. Media players and viewers
When you listen to audio files and streams, or view videos, the master
volume settings override all other volume settings in the device.

■ Audio player
You can listen to music and other audio files stored on your device or
memory card, and listen to audio streams from the Internet. You can
also create and manage playlists. Tap , and select Audio player.
The audio player supports the following file formats: AAC, AMR, AWB,
M3U, MP2, MP3, PLS, WAV, and WMA. The player does not necessarily
support all the variations of a file format.

Media players and viewers

The supported audio stream formats are: AAC, AMR, AMRWB, MP2,
MP3, and WAV. Streaming performance depends on the bandwidth
availability.

■ Internet radio
With Internet radio you can listen to Internet radio channels or any
other compatible audio streams. The Internet radio supports MP3 file
format, and M3U, PLS, RAM, and RPM playlists.
To add a radio channel to the playlist, do the following:
1. In the Web browser, search for the desired radio channel stream, and
use the context-sensitive menu to copy the address of that stream.
Hold the stylus down on the link for a second, and select
Copy link location.
2. In the home view of the device, tap
The Audio player application opens.

in the Internet radio dialog.

3. Select Audio player > Playlist > Add stream....
4. Tap the Web address field, and paste the link of the radio channel
stream. Tap OK.
5. Select Audio player > Playlist > Save.
To listen to a radio channel, select the desired channel from the playlist
in the Internet radio dialog, and tap .
To stop listening, tap

To adjust the volume, tap , and drag the slider with the stylus. To
close the volume control dialog, tap anywhere outside it.

■ Video player
To watch video clips stored on your device or memory card, or watch
streaming videos from the Internet, tap , and select Video player.
The video player supports the following file formats: MPE, MPEG, MPG,
RA, RAM, RM, RMJ, RMVB, RPM, RV, AVI (containing MPEG4 or H.263
video and MP3 audio), and 3GP/3GPP (containing MPEG4 or H.263 video
and AMR or AAC audio). The video player does not necessarily support
all the variations of a file format.
36

Media players and viewers

The supported video stream formats are: MPE, MPEG, MPG, RA, RM,
RMJ, RMVB, RV, AVI, and 3GP/3GPP. Streaming performance depends on
the bandwidth availability.

■ RSS feed reader
You can receive and read RSS news feeds from service providers. The
service provider may be a news agency, entertainment site, or an
individual who writes an online diary or journal.
Tap , and select RSS feed reader. The news folders and feeds you have
created are shown on the left. There may also be predefined folders and
feeds.
To subscribe to a news feed, do the following:
1. In the Web browser, search for a link labeled XML or RSS, and use the
context-sensitive menu to copy the address of that link. Hold the
stylus down on the link for a second, and select Copy link location.
2. In RSS feed reader, tap
on the application toolbar, and paste the
address of the news feed to the Add feed dialog.
The RSS feed reader supports the following file formats: Rich Site
Summary, RDF Site Summary, Really Simple Syndication (all are also
known as RSS), and Atom.

■ Images
To view images stored on your device, compatible mobile phone, or
memory card, tap , and select Utilities > Images.
The image viewer supports the following file formats: BMP, GIF, ICO,
JPE, JPEG, JPG, PNG, SVG Tiny, TIF, TIFF, and WBMP. The image viewer
does not necessarily support all variations of a file format.

Tools

6. Tools
■ Application manager
With Application manager you can install new applications, plug-ins,
and other extensions from the application download storages
(repositories) on the Internet and from the inbox, Web links, or the
File manager. You can also view and update installed packages and
uninstall them.
Tap

, and select Tools > Application manager.
Important: Only install and use applications and other software
from sources that offer adequate security and protection
against harmful software.

■ Connection manager
To monitor and manage connections established with the device, tap
, and select Tools > Connection manager.

■ Control panel
To perform configuration and customization tasks, tap , and select
Tools > Control panel. Select from the following functions and settings:
Accounts — Define account settings for Internet call and instant
messaging services.
Backup/Restore — Copy information to a memory card, and restore it to
your device. You cannot make back-up copies of applications you have
installed.
Certificate manager — View and manage digital certificates on your
device.
Connectivity — Define which Internet connections are used
automatically. Set idle times for all connection types. Create and edit
Internet access points.
Date and time — Select the home city, date, time, and daylight savings
zone.
38

Tools

Device — Change the name of your device, and view information about
your device and end-user licenses.
Device lock — Turn on the automatic device lock, set the time-out
period, and change the device lock code.
Display — Change the brightness of the display, set the automatic lock
for touch screen and keys, and define how soon the display brightness
decreases to save power, and how soon the display is turned off.
Language & region — Select your region and device language.
Memory — View the memory status of the device and the inserted
memory card.
Personalisation — Customize the look and feel of your device.
Phone — Pair a phone with your device.
Presence — Select your presence status, and set the auto-away period.
Screen calibration — Calibrate the touch screen.
Sounds — Set the master volume, or mute all device sounds. Select the
level of system alerts, key sounds, and touch screen sounds.
Task navigator — Customize the content of the task navigator area, and
modify the
menu.
Text input settings — Teach the device your handwriting style, set
default and alternative text input languages, set character recognition
speed, and turn word completion on or off.
To open a function or a group of settings, tap it once with the stylus.
To restore original factory settings, select Control panel > Tools >
Restore original settings.... This function does not affect content you have
created, security codes, passwords, the device language, or game scores.
To clear user data from the device, select Control panel > Tools >
Clear user data.... This function does not affect applications you have
installed.
To install connection settings from the cellular operator database, select
Control panel > Tools > Mobile operator setup wizard....

Utilities and games

■ File manager
In File manager, you can move, copy, rename, delete, and open files and
folders available in the device, compatible mobile phone, or memory
cards inserted in them.
Tap , and select File manager. The main folders are shown on the left
and the subfolders and files on the right.

7. Utilities and games
■ Calculator
Note: This calculator has limited accuracy and is designed for
simple calculations.
To access the calculator, tap

, and select Utilities > Calculator.

■ Clock
To set the date and time, select an analog or digital clock, and access
language and regional settings, tap , and select Utilities > Clock, or
tap the date and time on the right of the screen.

■ Notes
To create and save text notes, and send them through e-mail, tap
and select Utilities > Notes.

The notes application supports the following file formats: ascii (plain
text with no formatting) and .note.html (formatted text). The
application does not support the full .html file format.

■ PDF reader
To view documents in portable document format (PDF), tap
select Utilities > PDF reader.

, and

PC connectivity

■ Sketch
To draw simple images and send them through e-mail, tap , and
select Utilities > Sketch. All sketches are saved in .png format.

■ Games
Your device has a set of games.
To start a game, tap , and select Games and the desired game. In the
game start-up screen, tap Play.
For more information on how to use the tools, utilities, and games in
your device, see the help of each individual application.

8. PC connectivity
You can connect your device to a compatible PC with the supplied Nokia
Connectivity Cable DKE-2 (USB). Use the USB data cable to transfer files
to the memory card and to update the latest software on your device.
When the USB cable is connected, the memory card of your Nokia 770
Internet Tablet is listed as a mass storage device on your PC, and
is
displayed on your device. To be able to transfer files from the PC to the
device, you must have a compatible memory card installed in the device.
When the USB cable is connected, you cannot access the information on
the memory card with your device. However, you can transfer files from
your PC to the memory card, and view the contents of the memory card
on your PC.
Important: Do not remove the USB cable in the middle of an
operation when the device is being accessed. Removing the
cable in the middle of an operation may damage the memory
card as well as the device, and data stored may be corrupted.
When you are finished with file transfer, do not just pull the
USB cable from the PC, but follow the proper procedures to
disconnect your device from the PC. For more information, see
the user guide of your PC.
Copyright © 2006 Nokia. All rights reserved.

Battery information

■ Software update
To be able to update the software on your device, you must first install
the Nokia 770 software update wizard on your PC. You must also have
the USB cable, fully charged battery for your device, and the latest
software update file available.
For more information on the software update, check
www.nokia.com/770.
Tip: To check the version number of the current software on your
device, tap , and select Tools > Control panel > Device >
About product.

9. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The full performance
of a new battery is achieved only after two or three complete charge
and discharge cycles. The battery can be charged and discharged
hundreds of times, but it will eventually wear out. When the operating
and standby times are noticeably shorter than normal, replace the
battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if the battery
has not been used for a prolonged period, it may be necessary to
connect the charger then disconnect and reconnect it to begin charging
the battery.
Unplug the charger from the electrical plug and the device when not in
use. Do not leave a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
If the battery is completely discharged, it may take a few minutes before
the charging indicator appears on the display.

Battery information

Use the battery only for its intended purpose. Never use any charger or
battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object such as a coin, clip, or pen causes direct
connection of the positive (+) and negative (-) terminals of the battery.
(These look like metal strips on the battery.) This might happen, for
example, when you carry a spare battery in your pocket or purse.
Short-circuiting the terminals may damage the battery or the
connecting object.
Leaving the battery in hot or cold places, such as in a closed car in
summer or winter conditions, will reduce the capacity and lifetime of
the battery. Always try to keep the battery between 15°C and 25°C (59°F
and 77°F). A device with a hot or cold battery may not work temporarily,
even when the battery is fully charged. Battery performance is
particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may
also explode if damaged. Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household
waste.

■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you
are getting an original Nokia battery, purchase it from an authorized
Nokia dealer, look for the Nokia Original Enhancements logo on the
packaging, and inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your
battery is not an authentic original Nokia battery, you should refrain
from using it, and take it to the nearest authorized Nokia service point
or dealer for assistance. Your authorized Nokia service point or dealer
will inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.

Battery information

Authenticate hologram
1. When looking at the hologram on the label,
you should see the Nokia connecting hands
symbol from one angle and the Nokia
Original Enhancements logo when looking
from another angle.

2. When you angle the hologram left, right,
down, and up, you should see 1, 2, 3, and 4
dots on each side respectively.

3. Scratch the side of the label to reveal a
20-digit code, for example,
12345678919876543210. Turn the battery
so that the numbers are facing upwards. The
20-digit code reads starting from the
number at the top row followed by the
bottom row.
4. Confirm that the 20-digit code is valid by
following the instructions at
www.nokia.com/batterycheck.

To create a text message enter the 20-digit code, for example,
12345678919876543210, and send to +44 7786 200276.
To create a text message,
• For countries in Asia Pacific, excluding India: Enter the 20-digit code,
for example, 12345678919876543210, and send to +61 427151515.
44

Care and maintenance

• For India only: Enter Battery followed by the 20-digit battery code,
for example, Battery 12345678919876543210, and send to 5555.
National and international operator charges will apply.
You should receive a message indicating whether the code can be
authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the
label is an authentic Nokia battery, please do not use the battery. Take it
to the nearest authorized Nokia service point or dealer for assistance.
The use of a battery that is not approved by the manufacturer may be
dangerous and may result in poor performance and damage to your
device and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/
battery.

Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.

Additional safety information

• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as contacts and
e-mail messages) before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.

Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.

■ Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger.
Use the device only in its normal operating positions. This device meets RF
exposure guidelines when used either in the normal use position or when
positioned at least 1.0 centimeters (3/8 inches) away from the body. When a
carry case, belt clip, or holder is used for body-worn operation, it should not
contain metal and should position the device the above-stated distance from
your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with a hearing aid should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.

Additional safety information

The product is compliant with the following standards:
EN 300328-2, Harmonised standard for Data Transmission Equipment Operating
in the 2.4 GHz Band.
EN 50360, Product Standard to demonstrate the Compliance of Mobile Phones
with the Basic Restrictions related to Human Exposure to Electromagnetic Fields.
EN 301 489-01, Electro Magnetic Compatibility Standard for Radio Equipment
and Services.
EN 301 489-17, Specific (EMC) Conditions for Wideband Data and Hiperlan
Equipment.
EN 60950/IEC950, Safety of Information Technology Equipment.
1999/5/EC, Council Recommendation on the Limitation of Exposure of the
General Public to Electromagnetic Fields.
Please check compliance with other standards separately.

Open source software notice

Open source software notice
This product includes certain software originating from third parties that is subject to
1. the GNU Library/Lesser General Public License (LGPL), 2. the GNU General Public
License (GPL), and 3. different and/or additional copyright licenses, disclaimers,
acknowledgements, and notices. The LGPL, GPL and said certain other licenses are
available at www.nokia.com/support/770. You may obtain a complete corresponding
machine-readable copy of the source code of such software under the LGPL and the
GPL at www.nokia.com/support/770. Alternatively, Nokia offers to provide such source
code to you on CD-ROM for a charge covering the cost of performing such distribution,
such as the cost of media, shipping, and handling, upon written request to Nokia at:
Source Code Requests
Multimedia
Nokia Corporation
P.O.Box 407
FIN-00045 Nokia Group
FINLAND

This offer is valid for a period of three (3) years from the date of the distribution
of this product by Nokia. Please refer to the exact terms of the LGPL and the GPL
regarding your rights under said licenses.
This software is based in part on the work of the Independent JPEG Group.
The Graphics Interchange Format© is the Copyright property of CompuServe
Incorporated. GIF SM is a Service Mark property of CompuServe Incorporated.
This product includes software developed by:
• Computing Services at Carnegie Mellon University
(http://www.cmu.edu/computing/)
• Tommi Komulainen

• The Australian National University
•
•
•
•
•
•

The OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)
Gregory M. Christy
Pedro Roque Marques
Eric Rosenquist, Strata Software Limited
The XFree86 Project, Inc (http://www.xfree86.org/) and its contributors
The FreeType Team

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2006:10:23 10:49:28+03:00
Create Date                     : 2004:12:22 11:15:32Z
Page Count                      : 48
Creation Date                   : 2004:12:22 11:15:32Z
Mod Date                        : 2006:10:23 10:49:28+03:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 
Metadata Date                   : 2006:10:23 10:49:28+03:00
Creator                         : 
Title                           : 
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

Nokia 770 Instruction Manual N770 UG En

Navigation menu

Versions of this User Manual:

Views

Navigation