orcam technologies MYEYE2REVB Wearable Camera, Vision System, MYEYE2 revision B User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4201364
Application ID	GJ3YZhNmAG0ISXiXnKPn9w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.93kB (274093 bits)
Date Submitted	2019-03-14 00:00:00
Date Available	2019-03-14 00:00:00
Creation Date	2019-02-07 12:50:13
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2019-02-07 12:50:13
Document Title	User Manual
Document Creator	Adobe Acrobat Pro 11.0.23

User Guide.
Table of
Contents.
4. English
6. Español
8. Français
10. Deutsch
12. Italiano
20. Svensk
14. Português
22. Norsk
16. Nederlands
24. Suomi
18. Dansk
26. Română
28. български
Get Started.
Mounting the OrCam MyEye on glasses.
OrCam MyEye magnetically attaches to a mount
which is pre-installed on the glasses provided in the
box. To learn how to attach a mount to another pair
of glasses, visit the user area.
Diagram of OrCam MyEye 2:
Read or Recognize.
• Look at the text you want to read or the product,
banknote, barcode, or face you want OrCam to
recognize.
Camera
• Touch the touch bar. You will hear a camera
sound.
LED
lights
• OrCam will begin reading text or recognize the
product, banknote, barcode, or face.
Touch
bar
Magnets
that attach
to mount
Power
button
LED
Speaker
indicator
Charger
port
Eyelet loop
4. English
for lanyard
Read with Pointing.
• Hold the text about 12 inches (30 cm) directly in
front of your face.
• Point at the text area you want to read, with
the tip of your finger pointed up and the fingernail
facing the camera.
• When you hear a double beep, remove your finger
from the area.
• OrCam will begin reading the text and chime
when done.
Automatic Reading or Recognizing.
• Look at the text you want to read or the product,
banknote, barcode, or face you want OrCam to
recognize for several seconds.
• You will hear a camera sound. Then OrCam
will begin reading text or recognize the product,
banknote, barcode, or face.
Settings Menu Options.
• Customize your OrCam’s settings via the audio
settings menu. To enter, hold the power button,
swipe your finger along the touch bar, and then
release the power button. Some settings can be
altered with voice commands. For a complete list,
see the user area on the OrCam website.
• Automatic reading and recognition is disabled by
default. Enable it via the settings menu.
Learn Faces.*
Set the Volume.
• Stand about 3 feet (1 meter) from the person you
want to learn.
• To decrease volume, swipe your finger backwards
on the touch bar.
• Touch and hold the touch bar. The device will
start making camera sounds. Keep holding.
Help and Support.
• Follow audio instructions to complete face
learning. For more information, see the user area.
Learn Products.*
• To increase volume, swipe your finger forwards
on the touch bar.
For the full user guide and tutorial videos, or for
tips, advice, and troubleshooting support, visit
orcam.com/user-area
• Hold the barcode or product in front of you.
Or, contact our customer service department
at support@orcam.com
• Touch and hold the touch bar until you hear audio
instructions.
Please refer to the OrCam website for additional
Safety information: www.orcam.com/safety
• Follow audio instructions to complete barcode
or product learning. For more information, see the
user area.
*Not available in MyReader.
English .5
© 2018 OrCam Technologies Ltd. All rights reserved.
OrCam® is the trademark and brand name of OrCam
Technologies Ltd. (“OrCam”) and OrCam is the sole
proprietor of all the rights and all the intellectual property
rights in this guide and/or any other document produced
by OrCam relating thereto. The documents are protected by
applicable intellectual property laws including and without
limitation copyrights, patents, trademarks, know how, trade
secrets, and international treaties. No license or rights are
hereby transferred to the user of this guide and said guide
shall remain the sole and exclusive property of OrCam.
No part of this guide shall be used, reproduced, translated,
converted, modified, adapted, displayed, stored in a retrieval
system, communicated, or transmitted by any means, for
any commercial purpose, including and without limitation,
sale, resale, distribution, reproduction, license, rental, or
lease without receiving written permission from OrCam.
OrCam makes no expressed or implied representation or
warranty as to the accuracy or completeness of the contents
of this guide, which is provided “as is”, and assumes no
responsibility or liability for any errors or inaccuracies that
may appear in this document or for any product that may be
provided in association with this document.
OrCam devices are intended to enhance the day-to-day
lives of individuals with visual impairments. They are not
substitutes for existing methods or forms of assistance
and should not be relied upon in circumstances which are
potentially life- or health-threatening or which could lead to
financial loss. OrCam devices should especially never be
relied upon to drive vehicles or operate heavy machinery of
any kind.
Corporate Headquarters
OrCam Technologies
5 Kiryat HaMada St.
Jerusalem 9777513
Israel
+972.2.591.7800
United States and Canada
OrCam Inc.
1115 Broadway, 11th floor
New York, NY 10010
1.800.713.3741
United Kingdom
OrCam UK.
60 Gresham Street
London EC2V 7BB
0800.358.5323
| www.orcam.com | info@orcam.com
Print Date: OrCam MyEye2 Rev B, Software Version 8.2, Jan 2019
DOC000200
[EN] Safety and Warnings.
In no event shall OrCam be liable for any special, collateral, indirect,
punitive, incidental, consequential, or exemplary damages in connection
Cleaning.
Clean your device if you feel it is dirty or transferred between
users. Never touch the camera lens with your finger. Clean the lens only
with the supplied microfiber cloth and eyeglass cleaning fluid. Do not
use any abrasive materials. Do not expose the device to chemicals,
such as household cleaners, aerosol sprays, solvents, alcohol, or
ammonia. If you experience an allergic reaction to any of the elements
of the OrCam device contact a medical professional.
Terms and Conditions.
Your use of your OrCam device (the “Product”) is subject to the Terms
and Conditions found at orcam.com/terms-and-conditions. Your
agreement to these Terms and Conditions is a condition to your use of
the Product.
Please read the User Guide in full, including the important Safety
Instructions, BEFORE using your OrCam device. DO NOT use
your OrCam device until you have received in-person or online training
by an authorized OrCam Trainer™ or OrCam Training Program.
OrCam can take no responsibility if the Product was used other
than in accordance with the instructions in the User Guide. Products
should not be relied upon in circumstances that are potentially life- or
health-threatening or that could lead to financial loss. OrCam devices
should especially never be relied upon to drive vehicles or
operate heavy machinery of any kind. OrCam shall not be responsible
in the event that Products are used in such situations.
OrCam accepts no responsibility for the accuracy of the
barcode information attained from this or other providers.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
Customer acknowledges that, other than as explicitly stated
herein, OrCam does not make any representations or warranties to
Customer regarding the Product, its functions or any images it
produces.
The OrCam end-user limited product warranty (the “Limited
Warranty”) covers the owner of an OrCam product against defects in
material or workmanship at the time of its original purchase, for a
subsequent period of one (1) year, and for any additional applicable
legal warranty period. Original proof of purchase/delivery is required
from the owner in order to obtain this coverage.
OrCam will repair or replace, at its discretion, any product that
is determined by OrCam to be covered under this Limited Warranty.
OrCam will not be responsible for conditions arising as a result of
intentional damage or misuse of the product. The owner is responsible
for the costs of shipping the product to the location specified by OrCam.
This Limited Warranty is the sole and exclusive warranty
applicable to OrCam products. No third party has the authority to
make any representation, warranty, or agreement on behalf of OrCam
with respect to OrCam products. No warranty of any kind or nature is
made by OrCam beyond those expressly stated herein.
Corporate Headquarters
OrCam Technologies
5 Kiryat Hamada St.
Jerusalem 9777513 Israel
Before using the OrCam device, read these precautions with or arising out of the use of the product.
carefully to avoid dangerous situations and to ensure Without limiting any provisions limiting liability under this agreement,
ideal performance of your device. Handle your OrCam the limited warranty set forth herein will not apply, and the owner will
device with care. It can be damaged if dropped, burned, reimburse OrCam for any costs and expenses incurred in the event that:
(i) the product has been used other than in accordance with the product
punctured, or crushed. Do not open the device.
documentation and terms of use or other written operating instructions
The OrCam device is designed to work in ambient provided by OrCam
temperatures between 32°F and 104°F (0°C and 40°C) (ii) the product has been subject to tampering, misuse, negligence, or
and in normal conditions (Relative Humidity of 10% accident
to 90% RH and Atmospheric Pressure of up to 2000m (iii) the product or parts identification labels have been removed or the
above sea level (700hPa)). The device can be damaged product has been otherwise altered
if used outside of this range. Store and transport in (iv) the product has been opened, modified, repaired, serviced,
a cool, dry place (32°F to 104°F (0°C to 40°C) and maintained, or altered by someone other than an authorized OrCam
Relative Humidity of 5% to 90% and atmospheric representative
(v) the product has been combined with software, hardware, or other
pressure of 700hPa to 1060hPa)).
equipment not supplied by OrCam or not approved in writing by an
The OrCam device is water resistant but not authorized OrCam representative
waterproof. This means the device can withstand (vi) the product has been intentionally damaged or exposed to water, heat,
light rain or drizzle for short periods of time, although or high voltage
it is not recommended. Do not use the OrCam device (vii) the product has been used by a person who has not completed
in heavy rain, at the beach or swimming pool, or in or training by an authorized OrCam Trainer™
near a bathtub or shower. Do not submerge the OrCam Any parts replaced pursuant to this warranty will be under warranty for the
remaining time of the original warranty period or for ninety (90) days from
device in any liquid. IP Code: IP22.
the date of repair, whichever is longer.
Should you have a problem operating the OrCam device, If you believe that your product needs warranty support, contact your local
if the case or lens is cracked, or if you believe there representative. You will be responsible for shipping costs. However, if it
is something wrong with the device, please contact is determined that the warranty request is valid, OrCam will pay the total
support and do not attempt to repair it by yourself. Only cost of shipping the repaired or replaced product.
qualified OrCam personnel may repair or service your ORCAM DISCLAIMS ANY AND ALL WARRANTIES, WHETHER EXPRESSED
OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
device. Unauthorized repairs may void your warranty.
WARRANTIES OF NON-INFRINGEMENT OF THIRD-PARTY RIGHTS,
AND FITNESS FOR A PARTICULAR PURPOSE.
Do not attempt to replace the battery; you may MERCHANTABILITY
DOES NOT WARRANT THAT THE PRODUCT WILL BE ERROR FREE
damage it, which could cause overheating and even ORCAM
OR “BUG” FREE, WILL OPERATE WITHOUT INTERRUPTION, THAT ANY
injury. The battery is designed to last for two years of IMAGES OR SOUNDS PRODUCED BY THE PRODUCT WILL BE ACCURATE
average use (one charging cycle per day on average) OR THAT THE OPERATION OF THE PRODUCT WILL BE SECURE AND
DISCLAIMS ANY AND ALL LIABILITY ON ACCOUNT THEREOF.
after which it may need to be replaced. Use only the HEREBY
SECTION SHALL BE ENFORCEABLE TO THE FULLEST EXTENT
charger supplied with your OrCam device. Using THIS
ALLOWED BY APPLICABLE LAW.
another charger may void your warranty and could Refund policy.
cause severe injury.
You can return your undamaged device for a refund within the period
Do not force a connector into a port or apply required by local law. Returns may be subject to a re-stocking fee. Training
are non-refundable. Please contact your local representative or
excessive pressure to a button. This may cause fees
damage that is not covered under the warranty. If a OrCam Support to initiate a return process.
connector does not insert easily, check for FCC Compliance.
equipment has been tested and found to comply with the limits
obstructions in the port and verify that you have the This
a Class B digital device, pursuant to Part 15 of the FCC rules. These
correct connector for that port. Do not combine with for
limits are designed to provide reasonable protection against harmful
software, hardware, or other equipment not supplied interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
by OrCam.
accordance with the instructions, may cause harmful interference to radio
Exposing the device to magnetic fields may damage
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
the unit or erase your data.
interference to radio or television reception, which can be determined by
When using the OrCam device or charging the turning the equipment off and on, the user is encouraged to try to correct
battery, it is normal for the device to get warm. If the interference by one or more of the following measures:
the unit becomes excessively hot, leaks, or gives off Reorient or relocate the receiving antenna.
a burning smell, turn the device off immediately Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
and contact OrCam Support.
which the receiver is connected.
OrCam MyEye2 RevB meets the standard
requirements in the US and EU for Class 1 Consult the dealer or an experienced radio/TV technician.
medical devices. OrCam recommends keeping the This device complies with Part 15 of the FCC Rules.
OrCam MyEye’s magnets at least 6 in. /15 cm away Operation is subject to the following two conditions:
from any implantable cardiac equipment. If you have (1) This device may not cause harmful interference.
specific questions about use alongside an internal
This device must accept any interference received,
pacemaker and/or defibrillator, please consult your (2)
including interference that may cause undesired operation.
medical professional.
FCC Warning.
Do not use the OrCam device to read
Modifications not expressly approved by the manufacturer could void the
medication labeling.
user authority to operate the equipment under FCC Rules.
Warranty.
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
EU Authorized Representative for OrCam:
Medes Limited 5 Beaumont Gate, Shenley Hill, Radlett,
Hertfordshire, London WD7 7AR, United Kingdom.
Telephone: +44 20 8123 8056 Fax: +44 1923 859 810.
Applicable Standards.
OrCam MyEye2 RevB and MyReader2 RevB meet Annex VII of the
medical device Directive 93/42/EEC and 2007/47/EEC and the
essential requirements set out in Annex 1.
Applied Standards: EN IEC 60601-1. ETSI EN 301 489-1. ETSI EN 301
489-17. FCC Part 15, Subpart B. IEC/EN 60601-1-6. IEC 62366-1:2015.
EN IEC 60601-1-2. EN 62304. RoHS Directive 2011/65/EU. WEEE. EN ISO
14971:2016. Council Directive 93/42/EEC of 14 June 1993 concerning
medical device.
Please refer to the OrCam website for additional Safety information:
www.orcam.com/safety
For support, contact your local representative. Or, contact OrCam
Support at support@orcam.com or at:
FCC ID:
CE
2AAWI-MYEYE2REVB Compliant
Phone
Israel: +972.2.591.7800
US & Canada: 1.800.713.3741
UK: 0800.358.5323
Ireland: 1800.200.436
Restriction of Hazardous
Waste Electrical and
Refer to User
Substances Directive
Electronic Equipment
Instruction Guide
Compliant (materials Directive Compliant Contact
and components)
OrCam for proper disposal

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2019:02:07 12:50:13+02:00
Creator                         : Adobe Acrobat Pro 11.0.23
Modify Date                     : 2019:02:07 12:50:13+02:00
Title                           : 
Trapped                         : False
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Metadata Date                   : 2019:02:07 12:50:13+02:00
Creator Tool                    : Adobe Acrobat Pro 11.0.23
Format                          : application/pdf
Document ID                     : uuid:3ef30630-85a9-4ba1-a727-676ac18ffeba
Instance ID                     : uuid:ef4874a4-0030-42e9-8041-dd715a75dffd
Producer                        : Adobe PDF Library 15.0
Page Count                      : 9

EXIF Metadata provided by EXIF.tools