Pioneer AVIC F980 DAB Operation Manual F980DAB En

User Manual: pioneer AVIC F980 DAB - Operation Manual Free User Guide for Pioneer GPS, Manual - page1

Open the PDF directly: View PDF PDF.
Page Count: 87

Operation Manual
!"#$%&''(!)
!"#$%&'*(!)
!"#$%&+'*(!)
!"#$%&+'*),
!"#$%&+''*(!)
!"#$%&+''*),
!"#$%"&$'!("#()*)&+,
English
!"#$%&'(')%"*
Be sure to read Important Information for the User first!
Important Information for the User includes the important information that you
must understand before using this product.
English
+
Thank you for buying this Pioneer product.
Please read through these instructions so you
will know how to operate your model properly.
After you have finished reading the instruc-
tions, keep this document in a safe place for
future reference.
Important
The screens shown in the examples may
differ from actual screens, which may be
changed without notice for performance and
function improvements.
ɷ!Precaution!..........................4
,-./0"-1"21./3145"6/6-37"88888888888888888888888888888888&
9:-;.".<20"641;45"88888888888888888888888888888888888888888888&
ɷ!Basic!operation!..................4
#</=>21?"@43."146/0"41A"B;1=.2-10"88888888888888888&
C3-./=.21?"7-;3"@3-A;=."4?4210.".</B."8888888888888888D
,-./0"-1";021?".</"E#F"@41/5"8888888888888888888888888D
9AG;0.21?".</"E#F"@41/5"41?5/"8888888888888888888888888D
H10/3.21?I/G/=.21?I=-11/=.21?"6/A2488888888888888888D
/NÚRSTTIMESTARTUP"88888888888888888888888888888888888888888J
K-L".-";0/".</"0=3//10"888888888888888888888888888888888888'
M;@@-3./A"9N"0-;3=/"888888888888888888888888888888888888888O
F20@54721?".</"9N"-@/34.2-1"0=3//1"888888888888888888O
M/5/=.21?"4"0-;3=/"8888888888888888888888888888888888888888888O
#<41?21?".</"A20@547"-3A/3"-B"0-;3=/0"8888888888888O
P021?".</".-;=<"@41/5"88888888888888888888888888888888888888O
ɷ!How!to!use!the!Navigation!
menu!screen!....................10
Q@/34.21?".</",4R2?4.2-1"6/1;"0=3//1"8888888888((
ɷ!How!to!use!the!map!.........12
K-L".-"3/4A".</"64@"0=3//1"88888888888888888888888888(+
Q@/34.21?".</"64@"0=3//1"888888888888888888888888888888(+
P1A/30.41A21?".</"3-;./"?;2A41=/"88888888888888888(S
"ROWSINGTHEDATAÚELD"88888888888888888888888888888888888(&
ɷ!Searching!for!a!
destination!.......................14
K-L".-"@541"7-;3"3-;./"88888888888888888888888888888888888(&
M/43=<21?"B-3"4"5-=4.2-1":7"4AA3/00"888888888888888(D
M/43=<21?"B-3"C-21.0"-B"H1./3/0."TCQHU"8888888888888(D
M/5/=.21?"4"A/0.214.2-1"B3-6"0.-3/A"
5-=4.2-10"888888888888888888888888888888888888888888888888888(V
M/5/=.21?"4"A/0.214.2-1"B3-6"0.-3/A"3-;./0"88888(V
M/5/=.21?"4"5-=4.2-1"7-;"0/43=</A"B-3"
3/=/1.57"88888888888888888888888888888888888888888888888888888(V
M/43=<21?"B-3"4"5-=4.2-1";021?"W#-6:21/A"
M/43=<X"88888888888888888888888888888888888888888888888888888(J
M/43=<21?"B-3"4"5-=4.2-1":7".</"=--3A214./0"8888(J
M/43=<21?"B-3"4"5-=4.2-1":7"0=3-5521?".</"
64@"88888888888888888888888888888888888888888888888888888888888(J
P021?".</"WY4@"E-=4.2-1X"0=3//1"88888888888888888888(J
ɷ!Checking!and!modifying!
the!current!route!..............18
Y-A2B721?".</"3-;./"8888888888888888888888888888888888888888('
ɷ!Registering!and!editing!
locations!and!routes........20
M.-321?"4"5-=4.2-1"21"WM4R/A"E-=4.2-1X"888888888888+Z
M.-321?"4"3-;./"21"WM4R/A"$-;./0X"888888888888888888+Z
[A2.21?".</"0.-3/A"3-;./"8888888888888888888888888888888888+Z
F/5/.21?"0.-3/A"3-;./0"888888888888888888888888888888888888+Z
M4R21?"4"5-=4.2-1"40"41"45/3."@-21."88888888888888888+(
ɷ2 E C E I V I N G REALTIMETRAFÚC
information!(TMC)!............21
$ISPLAYINGTHEn4RAFÚC3UMMARYoSCREEN"88888888+(
6IEWINGTHETRAFÚCLIST"8888888888888888888888888888888888888+(
#HECKINGTHETRAFÚCINCIDENTSONTHEMAP"8888888++
7HENTRAFÚCINCIDENTSOCCURONYOURROUTE"88888++
4U R N I N G  T H E  T RA F Ú C  I N F O R M A T I O N  O N O R  O F F "88888888888++
ɷ!Checking!useful!
information!about!your!
trip!....................................22
F20@54721?".</"WP0/B;5"H1B-364.2-1X"6/1;"8888888++
$/=-3A21?"7-;3".34R/5"<20.-37"88888888888888888888888888+S
P021?".</"\32@"#-6@;./3"6-A/"88888888888888888888888+S
#45=;54.21?".</"B;/5"=-10;6@.2-1"8888888888888888888+&
ɷ!Customising!preferences!of!
the!navigation!..................24
#;0.-62021?".</"14R2?4.2-1"0/..21?0"888888888888888+&
H1B-364.2-1"-1"/4=<"-@.2-1"-B"WM/..21?0X"888888888+D
M/..21?".</"45/3."@-21."L43121?0"8888888888888888888888+'
]/..21?".</"64@";@A4./"8888888888888888888888888888888888+O
[^@41A21?".</";0/"-B".</"14R2?4.2-1"
B;1=.2-10"888888888888888888888888888888888888888888888888888+O
#-6@4.2:252.7"41A"=-11/=.2R2.7"888888888888888888888888+O
ɷ!Bluetooth®!connection!....30
F20@54721?".</"W%5;/.--.<X"0=3//1"8888888888888888888SZ
$/?20./321?"7-;3"%5;/.--.<"A/R2=/0"8888888888888888SZ
#-11/=.21?"4"3/?20./3/A"%5;/.--.<"A/R2=/"
641;4557"888888888888888888888888888888888888888888888888888S(
ML2.=<21?"R202:252.7"888888888888888888888888888888888888888888S(
[1./321?".</"CH,"=-A/"B-3"%5;/.--.<"L23/5/00"
=-11/=.2-1"888888888888888888888888888888888888888888888888S(
F20@54721?".</"A/R2=/"21B-364.2-1"8888888888888888888S(
#5/4321?".</"%5;/.--.<"6/6-378888888888888888888888S(
P@A4.21?"%5;/.--.<"0-B.L43/"88888888888888888888888888S(
F20@54721?".</"%5;/.--.<"0-B.L43/"R/302-1"888888S(
ɷ!HandsJfree!phoning!.........32
F20@54721?".</"@<-1/"6/1;"0=3//1"8888888888888888S+
Y4>21?"4"@<-1/"=455"888888888888888888888888888888888888888S+
$/=/2R21?"4"@<-1/"=455"88888888888888888888888888888888888S+
-INIMISINGTHEDIALCONÚRMATIONSCREEN"888888888SS
#<41?21?".</"@<-1/"0/..21?0"8888888888888888888888888SS
P021?".</"R-2=/"3/=-?12.2-1"B;1=.2-1"888888888888888SS
,-./0"B-3"<41A0)B3//"@<-121?"8888888888888888888888888SS
ɷ!Setup!for!iPod!/!iPhone!or!
smartphone!......................34
4HEBASICÛOWOFI0ODI0HONEORSMARTPHONE
0/.;@"888888888888888888888888888888888888888888888888888888888S&
M/..21?".</"A/R2=/"=-11/=.2-1"6/.<-A888888888888S&
2C-A"I"2C<-1/"=-6@4.2:252.7"88888888888888888888888888888S&
91A3-2A™"A/R2=/"=-6@4.2:252.78888888888888888888888888S&
H1B-364.2-1"-1".</"=-11/=.2-10"41A"B;1=.2-10"
B-3"/4=<"A/R2=/"888888888888888888888888888888888888888888SD
ɷ!Radio!................................37
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888SJ
M.-321?".</"0.3-1?/0.":3-4A=40."
B3/_;/1=2/0"88888888888888888888888888888888888888888888888SJ
F20@54721?".</"W$4A2-"0/..21?0X"0=3//1"88888888888SJ
ɷ!Digital!Radio!....................38
F2?2.45"$4A2-".;1/3"-@/34.2-10"888888888888888888888888SO
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888SO
E20./121?".-"4"3/=/1.":3-4A=40."T.26/"0<2B."
6-A/U"8888888888888888888888888888888888888888888888888888888SO
M/5/=.21?"4"0/3R2=/"=-6@-1/1."8888888888888888888888SO
F20@54721?".</"WF9%"0/..21?0X"0=3//1"8888888888888SO
ɷ!Disc!...................................40
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888&+
3ELECTINGÚLESFROMTHETRACKNAMELIST"88888888888&+
3WITCHINGTHEMEDIAÚLETYPE"88888888888888888888888888&+
M/43=<21?"B-3".</"@43."7-;"L41.".-"@547"8888888888&+
Q@/34.21?".</"FNF"6/1;"8888888888888888888888888888888&+
ML2.=<21?".</"0;:.2.5/I4;A2-"541?;4?/"888888888888&+
Q@/34.21?".</"FNF"6/1;";021?".-;=<"@41/5"
>/70"8888888888888888888888888888888888888888888888888888888888&+
ɷ#OMPRESSEDÚLES!.............43
M.43.21?"@3-=/A;3/"TB-3"F20=U"88888888888888888888888888&D
M.43.21?"@3-=/A;3/"TB-3"PM%IMFU"88888888888888888888&D
/PERATIONSCOMMONTOALLÚLETYPES"888888888888888&D
!UDIOÚLEOPERATIONS888888888888888888888888888888888888888&D
6IDEOÚLEOPERATIONS"88888888888888888888888888888888888888&D
3TILLIMAGEÚLEOPERATIONS"8888888888888888888888888888888&V
ɷ!iPod!..................................46
#-11/=.21?"7-;3"2C-A"8888888888888888888888888888888888888&J
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888&J
M/5/=.21?"0-1?"-3"R2A/-"0-;3=/0"B3-6".</"
@547520."0=3//1"8888888888888888888888888888888888888888888&J
P021?".<20"@3-A;=.`0"2C-A"B;1=.2-1"B3-6"7-;3"
2C-A"88888888888888888888888888888888888888888888888888888888888&J
M/5/=.21?"4"0-1?"B3-6".</"520."3/54./A".-".</"
0-1?"=;33/1.57"@54721?"T521>"0/43=<U"88888888888&'
P021?"9@@5/"Y;02="$4A2-"8888888888888888888888888888888&'
ɷ!AppRadio!Mode!...............48
9@@$4A2-"Y-A/"#-6@4.2:252.7"888888888888888888888888&'
P021?"9@@$4A2-"Y-A/"88888888888888888888888888888888888&O
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888&O
P021?".</">/7:-43A"TB-3"2C<-1/";0/30U"88888888888&O
9AG;0.21?".</"264?/"02a/"TB-3"0643.@<-1/"
T91A3-2AU";0/30U"8888888888888888888888888888888888888888DZ
P021?".</"4;A2-"62^"B;1=.2-1"88888888888888888888888888DZ
ɷ!Apple!CarPlay!..................50
P021?"9@@5/"#43C547"88888888888888888888888888888888888888DZ
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888DZ
M/..21?".</"A32R21?"@-02.2-1"88888888888888888888888888888D(
9AG;0.21?".</"R-5;6/"88888888888888888888888888888888888888D(
ɷ!Android!Auto™!.................51
P021?"91A3-2A"9;.-"8888888888888888888888888888888888888888D(
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888D(
M/..21?".</"4;.-)54;1=<"B;1=.2-1"888888888888888888888D+
M/..21?".</"A32R21?"@-02.2-1"88888888888888888888888888888D+
!"#$%&'(')%"*
$-./0./1
S
9AG;0.21?".</"R-5;6/"88888888888888888888888888888888888888D+
ɷ!Bluetooth!audio!player!....53
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888DS
3ELECTINGÚLESFROMTHEÚLENAMELIST"88888888888888DS
ɷ!HDMI!source.....................54
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888D&
ɷ!AUX!source!......................54
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888D&
M/..21?".</"R2A/-"02?145"8888888888888888888888888888888888D&
ɷ!AV!input!............................55
M.43.21?"@3-=/A;3/"TB-3"9N"0-;3=/U"88888888888888888DD
M.43.21?"@3-=/A;3/"TB-3"=46/34U"888888888888888888888DD
M/..21?".</"R2A/-"02?145"8888888888888888888888888888888888DD
ɷ!MIXTRAX!..........................56
P021?"YHb\$9b"888888888888888888888888888888888888888888888DV
M.43.21?"@3-=/A;3/"88888888888888888888888888888888888888888DV
M/5/=.21?"41"2./6"B3-6".</"520."888888888888888888888888DV
M/5/=.21?"0-1?0"1-.".-":/"@547/A"88888888888888888888DV
F20@54721?".</"WYHb\$9b"M/..21?0X"0=3//1"8888DJ
ɷ!Vehicle!equipment!
information!.......................57
P021?".</"N/<2=5/"%;0"4A4@./3"88888888888888888888888DJ
F20@54721?"-:0.4=5/"A/./=.2-1"21B-364.2-1"888888D'
F20@54721?".</"-@/34.21?"0.4.;0"-B".</"=5264./"
=-1.3-5"@41/5"888888888888888888888888888888888888888888888D'
ɷ!System!settings!...............58
F20@54721?".</"WM70./6X"0/..21?"0=3//1"8888888888D'
M/..21?".</"14R2?4.2-1"21B-364.2-1":43"888888888888D'
M/..21?"14R2?4.2-1"0=3//1"21./33;@.2-1"888888888888D'
M/..21?"%5;/.--.<"4;A2-"0-;3=/"4=.2R4.2-1"888888D'
M/..21?".</"/R/3"0=3-55"8888888888888888888888888888888888888D'
M/..21?".</"://@".-1/"8888888888888888888888888888888888888D'
M/..21?".</"3/43"R2/L"=46/34"88888888888888888888888888D'
M/..21?".</"0/=-1A"=46/34"8888888888888888888888888888DO
M/..21?".</"=46/34"B-3"#46/34"N2/L"6-A/"8888VZ
M/..21?".</"04B/"6-A/"888888888888888888888888888888888888VZ
M/..21?".</"A/6-"6-A/"8888888888888888888888888888888888VZ
M/5/=.21?".</"070./6"541?;4?/"8888888888888888888888VZ
$/R/3021?".</"=5264./"=-1.3-5"0.4.;0"
A20@5478888888888888888888888888888888888888888888888888888888VZ
M/..21?".</">/7:-43A"541?;4?/"L2.<".</"
4@@52=4.2-1"B-3"2C<-1/88888888888888888888888888888888VZ
9AG;0.21?".</"3/0@-10/"@-02.2-10"-B".</".-;=<"
@41/5"T.-;=<"@41/5"=452:34.2-1U"888888888888888888VZ
M/..21?".</"A266/3"88888888888888888888888888888888888888888V(
9AG;0.21?".</"@2=.;3/"88888888888888888888888888888888888888V(
$ISPLAYINGTHEÚRMWAREVERSION"888888888888888888888V(
F20@54721?".</"-@/1"0-;3=/"52=/1=/0"88888888888888V(
5PDATINGÚRMWARE"888888888888888888888888888888888888888888V(
#</=>21?"0/10-3"5/43121?"0.4.;0"41A"A32R21?"
0.4.;0"88888888888888888888888888888888888888888888888888888888V+
#</=>21?".</"=-11/=.2-10"-B"5/4A0"88888888888888888V+
ɷ!Audio!adjustments!..........63
F20@54721?".</"W9;A2-X"0/..21?"0=3//1"8888888888888VS
P021?"B4A/3I:4541=/"4AG;0.6/1."888888888888888888888VS
ML2.=<21?"0-;1A"6;.21?I4../1;4.2-1"88888888888888VS
9AG;0.21?"0-;3=/"5/R/50"8888888888888888888888888888888888VS
M/..21?".</"3/43"0@/4>/3"-;.@;."8888888888888888888888VS
M/..21?".</"0;:L--B/3"-;.@;.88888888888888888888888888VS
9AG;0.21?".</"=;.-BB"B3/_;/1=7"R45;/"88888888888888VS
M/5/=.21?".</"520./121?"@-02.2-1"88888888888888888888888VS
!DJUSTINGTHESPEAKEROUTPUTLEVELSÚNELY"8888888V&
9AG;0.21?".</".26/"452?16/1."88888888888888888888888888V&
P021?".</"/_;4520/3"8888888888888888888888888888888888888888V&
9AG;0.21?".</"/_;4520/3"=;3R/"4;.-64.2=4557"
T9;.-"[cU"88888888888888888888888888888888888888888888888888V&
ɷ!Theme!menu!....................66
F20@54721?".</"W\</6/X"0/..21?"0=3//1"88888888888VV
M/5/=.21?".</"L455@4@/3"8888888888888888888888888888888888VV
M/..21?".</"255;6214.2-1"=-5-;3"888888888888888888888888VV
M/5/=.21?".</".</6/"=-5-;3"88888888888888888888888888888VV
M/5/=.21?".</"0.75/"-B".</"=5-=>"88888888888888888888888VV
#<41?21?".</"@3/210.455/A"0@540<"0=3//1"8888888VV
$/@52=4.21?".</"0/..21?0"8888888888888888888888888888888888VJ
ɷ!Video!settings!..................67
M/..21?";@".</"R2A/-"@547/3"88888888888888888888888888888VJ
M/..21?".</"R2A/-"02?145"B-3".</"3/43"R2/L"
=46/34"888888888888888888888888888888888888888888888888888888V'
M/..21?".</"R2A/-"-;.@;."B-364."8888888888888888888888VO
ɷ!Favourite!menu!................69
#3/4.21?"4"0<-3.=;."8888888888888888888888888888888888888888VO
M/5/=.21?"4"0<-3.=;."888888888888888888888888888888888888888VO
$/6-R21?"4"0<-3.=;."88888888888888888888888888888888888888VO
ɷ!Other!functions!................69
M/..21?".</".26/"41A"A4./"8888888888888888888888888888888VO
M/..21?".</"WM-;1A"$/.32/R/3X"B;1=.2-1"888888888888VO
#<41?21?".</"L2A/"0=3//1"6-A/"88888888888888888888VO
M.-321?"0-1?"21B-364.2-1".-"41"2C-A"T2\;1/0®"
\4 ? ? 2 1 ? U "8888888888888888888888888888888888888888888888888888JZ
M/5/=.21?".</"R2A/-"B-3".</"3/43"A20@547"88888888888JZ
M/..21?".</"41.2).</B."B;1=.2-1"8888888888888888888888888JZ
$/0.-321?".<20"@3-A;=.".-".</"A/B4;5."
0/..21?0"88888888888888888888888888888888888888888888888888888J(
ɷ!Appendix!..........................71
\3 - ; : 5 / 0 < - - . 2 1 ? "888888888888888888888888888888888888888888888J(
[33-3"6/004?/0"888888888888888888888888888888888888888888888J+
C-02.2-121?"./=<1-5-?7"88888888888888888888888888888888888JD
K41A521?"543?/"/33-30"8888888888888888888888888888888888888JV
$-;./"0/..21?"21B-364.2-1"8888888888888888888888888888888J'
K41A521?"41A"=43/"-B"A20=0"88888888888888888888888888888JO
C5474:5/"A20=0"888888888888888888888888888888888888888888888888JO
F/.425/A"21B-364.2-1"B-3"@5474:5/"6/A24"888888888JO
%5;/.--.<"8888888888888888888888888888888888888888888888888888888'+
MFK#"888888888888888888888888888888888888888888888888888888888888'+
dY9IdYN"8888888888888888888888888888888888888888888888888888'+
eE9#"88888888888888888888888888888888888888888888888888888888888888'+
F2Rb"888888888888888888888888888888888888888888888888888888888888888'+
99#"888888888888888888888888888888888888888888888888888888888888888'S
]--?5/f"]--?5/"C547f"91A3-2A™"8888888888888888888888'S
91A3-2A"9;.-"88888888888888888888888888888888888888888888888888'S
YHb\$9b"8888888888888888888888888888888888888888888888888888888'S
F/.425/A"21B-364.2-1"3/?43A21?"=-11/=./A"2C-A"
A/R2=/0"888888888888888888888888888888888888888888888888888888'S
P021?"4@@):40/A"=-11/=./A"=-1./1."88888888888888'S
KFYH"8888888888888888888888888888888888888888888888888888888888888'&
YKE"888888888888888888888888888888888888888888888888888888888888888'&
HNQ,9"\/^.).-)M@//=<"88888888888888888888888888888888888'&
,-.2=/"3/?43A21?"R2A/-"R2/L21?"8888888888888888888888'&
,-.2=/"3/?43A21?"FNF)N2A/-"R2/L21?"8888888888888'&
.OTICEREGARDING-0ÚLEUSAGE"88888888888888888888'&
,-.2=/"3/?43A21?"-@/1"0-;3=/"52=/1=/0"8888888888'&
Y4@"=-R/34?/"888888888888888888888888888888888888888888888888'&
P021?".</"E#F"0=3//1"=-33/=.57"8888888888888888888888'&
3PECIÚCATIONS8888888888888888888888888888888888888888888888888'D
!"#$%&'(')%"*
$-./0./1
&
!"#$%&"'&('#$)'*+&,$,")-
.$/")$&)$,"0('1&#2$&0$2(3+$&4*##$)-
If the battery is disconnected or discharged, the memory will be
erased and must be reprogrammed.
Some of the settings and recorded contents will not be reset.
5*#*&%647$3#&#"&$)*%6)$
The information is erased by disconnecting the yellow lead from
the battery (or removing the battery itself).
Some of the settings and recorded contents will not be reset.
8$%$##('1&#2$&,(3)"9)"3$%%")
CAUTION
Pressing the -+)+& button resets settings and recorded
contents to the factory settings.
— Do not perform this operation when a device is connected
to this product.
— Some of the settings and recorded contents will not be
reset.
The microprocessor must be reset under the following
conditions:
Prior to using this product for the first time after installation.
If this product fails to operate properly.
If there appears to be problems with the operation of the
system.
If your vehicle position is shown on the map with a signifi-
cant positioning error.
1 Turn the ignition switch OFF.
2 Press the -+)+& button with a pen tip or other
pointed implement.
Refer to Checking part names and functions on page 4
Settings and recorded contents are reset to the factory settings.
:4"6#&#2(%&,*'6*+
This manual uses diagrams of actual screens to describe oper-
ations. However, the screens on some products may not match
those shown in this manual depending on the model used.
;$*'('1%&"/&<-,4"+%&=%$>&('&?2(%&
;*'6*+
X0000BT
This indicates model name that are supported
the described operations.
This indicates to touch an appropriate soft key
on the touch screen.
HOLD
This indicates to touch and hold an appropri-
ate soft key on the touch screen.
This indicates that there is a reference or
supplementary for the key or screen.
@2$3A('1&9*)#&'*,$%&*'>&
/6'3#("'%
F88DAB
F80DAB
1 2 3 45 6 7 8
9
ba
F980DAB
F980BT
F9880DAB
F9880BT
1
9
7
d
2
3
4
5
6
c
8
1LCD screen
2#'. (//0) button
230456/7-.)51748-9035/7-.
!"#$%&'(')%"*
230456/7-. )51748-9035/7-.
D
3,"1
button
Press to display the map screen.
Press and hold to switch to the camera view
mode.
p This function is available only when “ 2345(
637893($:;<=” or “>:?(637893($:;<=” is
set to “':”.
4 button Press to display the top menu screen.
Press and hold to activate the voice recogni-
tion function.
Refer to Using the voice recognition func-
tion on page 33
5,'@+
button
Press to switch between the Application
screen and the AV operation screen.
Press to turn the display off.
p Press and hold to turn the display off when
the Application screen is available.
p When the display is turned off, touch the
screen to revert to the original screen.
6&-A (
/ )
button
Press to return to the previous track (chapter)
or go to the next track (chapter).
Press and hold to perform fast reverse or fast
forwards.
Press to answer or end a call.
7 button
8-+)+&
button
Refer to Resetting the microprocessor on
page 4
9Disc-
loading
slot
Refer to Inserting and ejecting a disc on
page 6
10 SD card
slot
Refer to Inserting and ejecting an SD
memory card on page 6
11 Auto EQ
micro-
phone
input jack
Use to connect a microphone for acoustical
measurement (sold separately).
12 Detachable faceplate
13 button Press to remove the detachable faceplate from
this product.
p The remote control CD-R33 (sold separately) is available.
For details, refer to the remote control manual.
B)"#$3#('1&-"6)&9)">63#&*1*('%#&
#2$/#
F980DAB
F980BT
F9880DAB
F9880BT
CAUTION
Do not expose the detachable faceplate to excessive shock
or disassemble it.
Never grip the buttons tightly or use force when removing
or attaching the detachable faceplate.
Keep the detachable faceplate out of reach of small
children to prevent them from placing it in their mouths.
After removing the detachable faceplate, keep it in a safe
place so it is not scratched or damaged.
Do not expose the detachable faceplate to direct sunlight
and high temperatures.
When removing or attaching the detachable faceplate, do
so after turning off the ignition switch (ACC OFF).
8$,"0('1&#2$&>$#*32*4+$&/*3$9+*#$
1 Press the button.
2 Gently grip the bottom of the detachable face-
plate and slowly pull it outward.
1
1 Detachable faceplate
:##*32('1&#2$&>$#*32*4+$&/*3$9+*#$
1 Slide the detachable faceplate all the way into
this product.
2 Push the lower part of the detachable faceplate
until you hear a click.
!"#$%&"'&6%('1&#2$&C@5&9*'$+
F88DAB
F80DAB
WARNING
Keep hands and fingers clear of this product when
opening, closing, or adjusting the LCD panel. Be especially
cautious of children’s hands and fingers.
Do not use with the LCD panel left open. It may result in
injury in the event of an accident.
CAUTION
Do not open or close the LCD panel by force. It may cause
a malfunction.
Do not operate this product until the LCD panel has
completely opened or closed. If this product is operated
while the LCD panel is opening or closing, the LCD panel
may stop at that angle for safety.
Do not place a glass or can on the open LCD panel.
:>76%#('1&#2$&C@5&9*'$+&*'1+$
F88DAB
F80DAB
1 Press the button.
2 Touch or to adjust the angle of the
LCD panel.
3 Touch .
Returns to the previous screen.
D'%$)#('1E$7$3#('1E3"''$3#('1&
,$>(*
CAUTION
Do not insert anything other than a disc into the disc-
loading slot.
Do not insert anything other than SD memory cards into
the SD card slot.
Ejecting an SD memory card during data transfer can
damage the SD memory card. Be sure to eject the SD
memory card by the procedure described in this manual.
Do not press the button when an SD memory card is not
fully inserted. Doing so may damage the card.
Do not press the button before an SD memory card has
been completely removed. Doing so may damage the card.
!"#$%&'(')%"*
)51748-9035/7-.
V
D'%$)#('1&*'>&$7$3#('1&*&>(%3
D'%$)#('1&*&>(%3
F88DAB
F80DAB
1 Press the button.
2 Touch to open the LCD panel.
3 Insert a disc into the disc-loading slot.
F980DAB
F980BT
F9880DAB
F9880BT
1 Insert a disc into the disc-loading slot.
F7$3#('1&*&>(%3
F88DAB
F80DAB
1 Press the button.
2 Touch to open the LCD panel.
3 Remove the disc, and press the button.
F980DAB
F980BT
F9880DAB
F9880BT
1 Press the button.
D'%$)#('1&*'>&$7$3#('1&*'&<5&,$,")-&
3*)>
F88DAB
F80DAB
p This system is not compatible with the Multi Media Card
(MMC).
p Compatibility with all SD memory cards is not guaranteed.
p This product may not achieve optimum performance with
some SD memory cards.
D'%$)#('1&*'&<5&,$,")-&3*)>
1 Press the button.
2 Touch to open the LCD panel.
3 Insert an SD memory card into the SD card
slot.
4 Press the button.
F7$3#('1&*'&<5&,$,")-&3*)>
1 Press the button.
2 Touch to open the LCD panel.
3 Press the middle of the SD memory card gently
until it clicks.
4 Pull the SD memory card out straight.
5 Press the button.
B+611('1&*'>&6'9+611('1&*&=<.&%#")G
*1$&>$0(3$
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
2
1
1 USB cable
2 USB storage device
p Check that no data is being accessed before pulling out the
USB storage device.
!"#$%&'(')%"*
)51748-9035/7-.
J
.MÐÆQRSSHLDÐRS@QSTO
1 Start the engine to boot up the system.
The “)8B84=(19CD937(.3:D<3D8” screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
p From the second time on, enter the password for the anti-
theft function if the password entry screen appears.
2 Touch the language.
3 Touch .
The “)739=;EC:8()8=<;” screen appears.
4 Touch the item.
Refer to Information on the connections and functions for
each device on page 35
5 Touch .
F88DAB
F80DAB
F980DAB
F9880DAB
The “@"2("!&+!!"(1'F+-()+&&$!%” screen appears.
Proceeds to the next step.
F980BT
F9880BT
The warning message screen appears.
Proceeds to step 8.
6 Touch [*8G] or [!C].
*8G (default):
Supplies power to a Digital Radio aerial. Select when using
the optional Digital Radio aerial (AN-DAB1 or CA-AN-
DAB.001) (sold separately) with this product.
!C:
Does not supply power. Select when using a passive aerial
with no booster.
7 Touch .
The warning message screen appears.
8 Touch ['A].
The top menu screen appears.
.MÐÆQRSSHLDÐRS@QSTOÐNEÐSGDÐM@UHF@G
#("'&%-%#$,
When you use the navigation function for the first time, an initial
setup process starts automatically. Follow the steps below.
p You can change the language later using [-8DHC:3B] in the
“)8==H:DG” screen. Other settings can be restarted later
using [2S@QSÄ"NM×FTQ@SHNMÄ6HY@QC] in the “)8==H:DG”
screen.
1 Press the button.
2 Touch or .
3 Touch the language that you want to use on the
navigation screen, then touch [)8B84=].
4 Read the terms carefully, checking the details,
and then touch ["448;=] if you agree to the
conditions.
5 Touch [!8I=].
6 Touch the language that you want to use for
voice guidance messages, then touch [!8I=].
7 If needed, modify the unit settings, then touch
[!8I=].
8 If needed, modify the default route planning
options, then touch [!8I=].
9 Touch ["4=HJ3=8], then [!8I=].
A message saying that the connected online features are acti-
vated appears if you activate these services right away.
Refer to “':BH:8()89JH48G” settings on page 28
10 Touch the connected services you want to use,
then touch [!8I=].
The initial setup is now complete. The map screen appears and
you can start using the navigation system.
!"#$%&'(')%"*
)51748-9035/7-.
'
H"I&#"&6%$&#2$&%3)$$'%
Top menu screen
Application menu screen
Application operation screen
Time and date setting screen Setting menu screen
Phone menu screen
AV source selection screen
Favorite source icons
AV operation screen
Map screen
Navigation menu screen
!"#$%&'(')%"*
)51748-9035/7-.
O
p By pressing the button on any screen you can display the
top menu screen.
p The character string “"11)” is replaced with “";;B8(
6391B3K” when Apple CarPlay is running.
p LMM@"2/LMN@"2
The character string “"11)” is replaced with “":?9CH?(
"<=C” when Android Auto is running.
p If you select “1CO89('LL” on the AV source selection screen,
you can turn off almost all functions. The “1CO89('LL” mode
is released in the following cases:
— An incoming call is received.
— The rear view camera image is input when the vehicle
reverses.
— A button on this product is pressed.
— The ignition switch is turned off (ACC OFF), then turned on
(ACC ON).
p To protect this product from damage, the cooling fan may
operate in “1CO89('LL” mode.
<699")#$>&:J&%"6)3$
You can play or use the following sources with this product.
Radio (FM, MW/LW)
Digital Radio (DAB) (*1)
CD
ROM (compressed audio or video files on discs)
DVD-Video
Video-CD
The following sources can be played back or used by connecting
an auxiliary device.
USB
SD (*2)
iPod
Bluetooth® audio
AV input (AV)
AUX
HDMI (*3)
p (*1) LMM@"2/LMN@"2/LPMN@"2/LPMMN@"2
p (*2) LMM@"2/LMN@"2
p (*3) LMM@"2
5(%9+*-('1&#2$&:J&"9$)*#("'&
%3)$$'
1 Press the button.
2 Touch the AV operation key.
1
1 AV operation key
The AV operation screen appears.
12
3
1 Displays the source list.
2 Recalls equalizer curves.
Refer to Using the equaliser on page 64
3 Shows the navigation information.
p This is not displayed for some sources.
p This is not displayed when “!3JHD3=HC:(H:QC(OH:?CO” is set
to “'QQ”.
Refer to Setting the navigation information bar on page
58
<$+$3#('1&*&%"6)3$
<"6)3$&"'&#2$&:J&%"6)3$&%$+$3#("'&
%3)$$'
1 Display the AV source selection screen.
2 Touch the source icon.
p When you select “)C<948('LL”, the AV source is turned off.
<"6)3$&"'&#2$&%"6)3$&+(%#
1 Display the source list.
Refer to Displaying the AV operation screen on page 9
2 Touch the source key.
p When you select “)C<948('LL”, the AV source is turned off.
@2*'1('1&#2$&>(%9+*-&")>$)&"/&
%"6)3$%
@2*'1('1&#2$&>(%9+*-&")>$)&"/&%"6)3$&
(3"'%
1 Display the AV source selection screen.
2 Touch and hold a source icon, and drag the icon
to the desired position.
@2*'1('1&#2$&>(%9+*-&")>$)&"/&%"6)3$&
A$-%
1 Display the source list.
Refer to Displaying the AV operation screen on page 9
2 Touch .
3 Drag the source key to the desired position.
=%('1&#2$&#"632&9*'$+
You can operate this product by touching the keys on the screen
directly with your fingers.
p To protect the LCD screen from damage, be sure to touch the
screen only with your finger gently.
!"#$%&'(')%"*
)51748-9035/7-.
(Z
@",,"'&#"632&9*'$+&A$-%
: Returns to the previous screen.
: Closes the screen.
K9$)*#('1&+(%#&%3)$$'%
3
12
1 Touching an item on the list allows you to narrow down the
options and proceed to the next operation.
2 Appears when all characters are not displayed on the display
area.
If you touch the key, the rest are scrolled for display.
3 Appears when items cannot be displayed on a single page.
Drag the slider bar or the list to view any hidden items.
K9$)*#('1&#2$&#(,$&4*)
1
1 You can change the playback point by dragging the key.
p Playback time corresponding to the position of the key is
displayed while dragging the key.
p This function is not available for some media or sources.
<I(#32('1&#2$&"9$)*#("'&9*'$+
1 Touch .
The hidden function keys appears.
p This key does not appear for some AV sources.
K9$)*#('1&#2$&"'G%3)$$'&A$-4"*)>
6
5
4
3
8
7
21
1 Displays the characters that are entered.
2 Moves the cursor to the right or left for a number of charac-
ters equivalent to the number of touches.
3 Enters the characters in the text box.
4 Deletes the input text to the left of the cursor one letter at a
time. Touching and holding the key deletes the letters to the
left of the cursor in rapid succession.
5 Confirms the entry and proceeds to the next step.
6 Enters a space.
7 Switches between alphabet and numbers/symbols.
8 Switches between capital and lower case letters.
Displays the traffic screen.
Searches for your destination by the
address or coordinates, or searches
for the selected place of interest, etc.
Builds your route or edits the
route currently set.
Displays useful information to
support your driving.
Main Menu 1
(without a planned route)
:-;8/-86108/<08=5>7?5/7-.8@0.6814300.
!"#$%&'(')%"*
)51748-9035/7-. :-;8/-86108/<08
=5>7?5/7-.8@0.68
14300.
((
You can also access the “SyncTool”
screen from this menu.
Displays information about your
navigation system.
The version information, or licenses
can be displayed, for example.
Main Menu 2
Configures the navigation-related
settings.
(without a planned route)
K9$)*#('1&#2$&!*0(1*#("'&,$'6&
%3)$$'
1 Press the ,"1 button.
2 Touch .
K#2$)&(#$,%
You will also see the following keys when you are navigating
without a planned route.
1 2
345
6
1 Returns to the map screen.
2 Displays notifications that contain important information.
3 Displays the location that you saved as a favourite.
4 Switches among 2D, 3D, and 2D North up view modes.
5 Displays the “4RDQÄ/QN×KDR” screen where you can create
new profiles or edit the existing profiles.
If multiple drivers are using this product, they can create
their own profiles with their own settings. If you select a new
profile, this product restarts so that the new settings can
take effect.
6 Displays the previous or next page of the navigation menu.
If there is no next or previous page, this item is grayed out.
p on the upper right corner of the screen is used for
"#$6)*!6(";; connection.
Be sure read Expanding the use of the navigation functions
(page 29) before using the "#$6)*!6 function.
When you are navigating a planned route, the following route-re-
lated keys are available.
21345
1 Adds a waypoint.
2 Displays route alternatives, parts of the route to avoid, or
specific roads in your planned route to avoid.
3 Suspends and resumes the route guidance.
4 Displays the route in its full length on the map, and displays
route parameters and route alternatives.
5 Deletes your route or removes a waypoint.
!"#$%&'(')%"*
:-;8/-86108/<08=5>7?5/7-.8@0.6814300.
(+
Most of the information provided by your navigation system
can be seen on the map. You need to become familiar with how
information appears on the map.
H"I&#"&)$*>&#2$&,*9&%3)$$'
5
4
1
2
3
6
7
9
8
p The following information marked with an asterisk (*)
appears only when a route is set.
p Depending on the conditions and settings, some items may
not be displayed.
1 Shows the number and name of the street to be used (or
next guidance point).*
2 Shows the next guidance point (manoeuvre).*
The type of the event (turn, roundabout, exiting motorway,
etc.) is displayed.
Refer to Frequently shown route events on page 13
3 Shows the distance to the next guidance point
(manoeuvre).*
4 Shows the maneuver after the next maneuver.*
5 Indicates the current location of your vehicle. The apex of the
triangular mark indicates your orientation and the display
moves automatically as you drive.
p When there is no GPS position, the triangular mark is
transparent. It shows your last known position.
6 Displays the data field.
7 Shows the name of the street (or city) that your vehicle is
travelling on (or in).
8 Indicates the current route.*
The route currently set is highlighted in colour on the map.
9 Indicates the progress to the final destination.*
:J&('/"),*#("'&4*)
AV information is displayed at the bottom of the map screen.
12 3 4
1 Touch to display the AV source list.
2 Shows the current status of AV source briefly.
3
You can turn on or off the communication between the
"#$6)*!6(";; and the navigation system by touching the key.
p This setting is always turned on when you use the
"#$6)*!6(";; on an iPod / iPhone (the setting cannot
be changed).
4 Touch to display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
K9$)*#('1&#2$&,*9&%3)$$'
@2*'1('1&#2$&%3*+$&"/&#2$&,*9&
,*'6*++-
By default, even if the map scale is changed on the scrolled
map, it will return to the preset scale (according to the setting
in “#H8O;CH:=”of the “!3JHD3=HC:(,3;” settings) when the
current position map is displayed. If you change the scale of the
current position map, perform the following procedure.
1 Press the ,"1 button and touch .
2 Touch , and then touch [)8==H:DG].
3 Touch [!3JHD3=HC:(,3;], and then [,3;(
@HG;B3K].
4 Touch [#H8O;CH:=].
5 Drag the pop-up window and touch [,3:<3B].
6 Press the ,"1 button.
7 Touch or .
<,*)#&L"",
Your navigation system features “Smart Zoom” that works in
two ways:
When the route is set:
When approaching a turn, “Smart Zoom” will zoom in and
raise the view angle to enable you to easily recognise your
manoeuvre at the next junction. If the next turn is at a dis-
tance, it will zoom out and lower the view angle to be flat so
you can see the road in front of you.
When the route is not set:
“Smart Zoom” will zoom in if you drive slowly and zoom out
when you drive at high speed.
<I(#32('1&4$#I$$'&M5N&O5N&*'>&M5&
!")#2&69&0($I%
You can switch how the map is displayed. For 2D map view
mode, you can select between “Heading up” and “North up”.
Heading up:
The map display always shows the vehicle’s direction as
proceeding toward the top of the screen.
North up:
The map display always has north at the top of the screen.
p The map orientation is fixed at “Heading up” when the 3D
map screen is displayed.
1 Press the ,"1 button.
2 Touch .
3 Touch the following key.
Each time you touch the key the setting changes.
Indicates 2D Heading up view mode is
currently selected.
Indicates 3D Heading up view mode is
currently selected.
Indicates 2D North up view mode is
currently selected.
p There is a limit to map scaling in 3D map view mode. If the
map scale is zoomed out further, the map is zoomed out in
2D map.
:-;8/-86108/<08@59
!"#$%&'(')%"*
:-;8/-86108/<08@59
(S
<3)"++('1&#2$&,*9&#"&#2$&9"%(#("'&-"6&
I*'#&#"&%$$
1 Press the ,"1 button.
2 Touch anywhere on the map or touch and drag
the map in the desired direction to scroll.
If you place the cursor on the desired location, a brief overview
about the location will appear at the top of the screen, showing
the street name and other information for the location.
3 Touch .
The map returns to the current position.
p If you press the ,"1 button, the map returns to the current
position.
@"'#)"+&A$-%&"'&#2$&%3)"++$>&,*9
Rotates the map clockwise or
counterclockwise.
Changes the map view mode.
The current map mode is shown on the
control key.
Zooms in or out on the map.
You can also zoom out or in by
pinching or expanding the map.
Cancels map rotation.
Tilts the map angle up or
down.
You can change the vertical view
angle of the map in 3D mode
only.
Map screen (scrolled map)
='>$)%#*'>('1&#2$&)"6#$&
16(>*'3$
Once the route guidance begins, the system provides various
guides by voice, text indications and signs.
P)$Q6$'#+-&%2"I'&)"6#$&$0$'#%
The following are some examples of the maneuvers that are
displayed.
Icon Meaning
Turn left, turn right, turn back.
3
Go left on the roundabout, 3rd exit
(next manoeuvre).
Enter roundabout (manoeuvre after
the next manoeuvre).
Motorway entrance or motorway exit.
Board ferry or leave ferry.
Approaching the destination or a
waypoint.
C*'$&('/"),*#("'
When navigating on multilane roads, you will need to make sure
to take the proper lane for the recommended route.
!"#$%&'(')%"*
:-;8/-86108/<08@59
(&
<(1'9"%#%
Signs are displayed at the top of the map.
R6'3#("'&0($I
If you are approaching a complex intersection, the map is
replaced with a 3D view of the junction.
p If the data for these items is not contained in the map data,
the information is not available even if there are signs on the
actual road.
When you set “'QQ89(,C=C9O3K()89JH48G” to “C:”, the icon
appears while you are driving on motorways. Touch the icon
to open the details of the next few exits or service stations. In
addition, touch an item to show its location on the map. You can
set it as a waypoint easily.
!QNVRHMFÐSGDÐC@S@ÐÆDKC
The data fields are different when you are navigating a route and
when you have no specified destination. For example, the data
field provides the following information.
When the route is set:
Distance to final destination, time needed to reach the final
destination and estimated arrival time are shown.
When the route is not set:
Direction or altitude is shown.
p Touching and holding the field allows you to display the
setting screen for the field.
Refer to @3=3(LH8B?G on page 27
p The estimated time of arrival is an ideal value calculated
based on the speed limit value set in “,3IR();88?” of vehi-
cle type setting and the actual driving speed. The estimated
time of arrival is only a reference value, and does not guaran-
tee arrival at that time.
Refer to “-C<=8(198Q898:48G” settings on page 25
CAUTION
For safety reasons, these route-setting functions are not
available while your vehicle is in motion. To enable these
functions, you must stop in a safe place and put on the
handbrake.
p Some information regarding traffic regulations depends on
the time when the route calculation is performed. Thus, the
information may not correspond with a certain traffic regula-
tion when your vehicle actually passes through the location
in question. Also, the information on the traffic regulations
provided applies for a passenger vehicle, and not for a truck
or other delivery vehicles. Always follow the actual traffic
regulations when driving.
p [@8G=H:3=HC:(Q9C7(1EC:8] and [':BH:8()8394E] on the
“!8O(-C<=8(=CRRR” screen can be used when the "#$6)*!6(
";; connection is established.
Be sure read Expanding the use of the navigation functions
(page 29) before using the "#$6)*!6 function.
H"I&#"&9+*'&-"6)&)"6#$
The following is a summary of the route setting procedure.
1 Search for a destination using various methods
on the [!8O(-C<=8] menu.
The location you searched for appears on the “,3;(.C43=HC:”
screen.
2 Touch [)8B84=(3G(@8G=H:3=HC:].
Refer to Using the “,3;(.C43=HC:” screen on page 17
The “-C<=8()<7739K” screen appears and countdown begins.
When the countdown ends, the guidance automatically starts.
If you touch the screen anywhere during the countdown, the
countdown stops and the screen will stay as it is.
Refer to Checking route information and preferences on page
19
3 Touch [)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
Refer to Understanding the route guidance on page 13
A0534<7.?8B-3858C01/7.5/7-.
!"#$%&'(')%"*
:-;8/-86108/<08@59 A0534<7.?8B-3858
C01/7.5/7-.
(D
<$*)32('1&/")&*&+"3*#("'&4-&
*>>)$%%
The most frequently used function is the address search in
which the address is specified and the location is searched.
p Depending on the search results, some steps may be
skipped.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch ["??98GG].
4 Touch the following text box and set the desti-
nation you are looking for.
6C<:=9K:
By default, your navigation system proposes the country
where you are.
If you want to change the area to search set another country.
&CO : (C 9(1C G=4 C ?8 :
By default, your navigation system proposes the city/town
where you are. You can select the city/town using its postal
code instead of its name.
)=988=:
If the street name is not available, touch [%C(=C(&CO:] and
select the city/town. This way the centre of the selected city/
town becomes the destination of the route.
)8B84=(SC<G8(!<7T89(C9($:=89G84=HC::
This item will be displayed after you have set a street. If the
house number is not available, touch [%C(=C()=988=] and
select the street. This way the centre of the selected street
becomes the destination of the route.
After you touch the selected address to finish the address
search, the searched location appears on the Map screen.
5 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<$*)32('1&/")&B"('#%&"/&D'#$)$%#&
SBKDT
Information about various facilities (Points Of Interest – POI),
such as petrol stations, car parks or restaurants, is available. You
can search for a POI by selecting the category (or entering the
POI Name).
<$*)32('1&/")&BKD%&6%('1&9)$%$#&
3*#$1")($%
The preset search allows you to quickly find the most frequently
selected types of POIs.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch [1B348G].
The preset search categories are as follows.
18=9CB()=3=HC:
"44C77C?3=HC:
-8G=3<93:=
1395H:D
p When a route is not set, POIs are searched for around the
current position.
p When the current position is not available either (no GPS sig-
nal), POIs are searched for around the last known position.
p When a route is set, “18=9CB()=3=HC:” and “-8G=3<93:=” are
searched for along the route, and “"44C77C?3=HC:” and
“1395H:D” are searched for around the destination.
4 Touch the category.
5 Touch the POI.
The searched location appears on the map screen.
If you touch , you can sort the results or show
the locations of all facilities on the map.
6 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<$*)32('1&/")&BKD%&4-&3*#$1")($%&
")&>()$3#+-&/)",&#2$&'*,$&"/&#2$&
/*3(+(#($%
You can search for POIs by their categories and subcategories.
You can also search for POIs by their names in each of their
categories.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch [1B348G].
4 Touch [)8394E("7C:D("BB(1B348G].
5 Touch ["9C<:?(S898] and then select the area
in which the POIs should be searched for.
63=8DC9K(#H8O:
You can select whether or not POI categories are displayed.
"9C<:?(S898:
Searches around the current position. Or, around the last
known position if the current position is not available. (The
results will be listed in order of the distance from this position.)
$:(3(&CO::
Searches for a place within a selected city/town. (The results
will be listed in order of the distance from the centre of the
selected city/town.)
"9C<:?(@8G=H:3=HC::
Searches for a place around the destination of the current
route. (The results will be listed in order of the distance from
the destination.)
p This key is active only when the route is set.
"BC:D(-C<=8:
Searches along the current route, and not around a point
already set. This is useful when searching for a stopover that
results in a minimal detour, such as searching for petrol
stations or restaurants. (The results will be listed in order of
the length of the necessary detour.)
p This key is active only when the route is set.
6 Select one of the categories, subcategories or
brands to narrow down the places.
If you touch [)8394E(TK(!378], you can search for
POIs by their names.
7 Touch the POI.
The searched location appears on the map screen.
If you touch , you can change the sort method
of the results.
8 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
!"#$%&'(')%"*
A0534<7.?8B-3858C01/7.5/7-.
(V
<$*)32('1&/")&9)"0(>$)%&'$*)4-&#2*#&
"//$)&$,$)1$'3-&")&)"*>%(>$&*%%(%G
#*'3$&%$)0(3$%
Important
Never use this product to route to hospitals, police stations
or similar facilities in an emergency. Stop using any
functions relating to the hands-free phoning and please call
the appropriate emergency number.
You can search for locations that provide emergency or roadside
assistance in the surrounding areas.
p This information does not necessarily correspond to actual
information. Utilise the information for your reference.
1 Press the ,"1 button and touch .
2 Touch [UG8Q<B($:QC973=HC:].
3 Touch [S8B;(!839TK].
The preset search categories are as follows.
639(-8;3H9
S83B=E
1CBH48
18=9CB()=3=HC:
4 Touch the category.
5 Touch the POI.
The searched location appears on the map screen.
If you touch , you can change the sort method
of the results.
6 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<$+$3#('1&*&>$%#('*#("'&/)",&
%#")$>&+"3*#("'%
Storing locations you visit frequently saves time and effort.
Selecting an item from the list provides an easy way to specify
the position.
The list of saved locations contains two preset categories: SC78
and FC95.
p This function is available if locations have been registered in
“)3J8?(.C43=HC:”.
Refer to Storing a location in “)3J8?(.C43=HC:” on page
20
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch [)3J8?(.C43=HC:].
If you touch and then [+?H=], you can edit the
details of saved locations.
4 Touch the entry.
The searched location appears on the map screen.
5 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<$+$3#('1&*&>$%#('*#("'&/)",&
%#")$>&)"6#$%
Storing routes you use frequently saves time and effort.
p This function is not available if no routes have been regis-
tered in “)3J8?(-C<=8G”.
Refer to Storing a route in “)3J8?(-C<=8G” on page 20
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch to show the next page.
4 Touch [)3J8?(-C<=8G].
5 Touch the entry.
p You can add waypoints or change the final destination on the
“-C<=8(1B3::89” screen.
Refer to Building a route using “-C<=8(1B3::89” on page
18
6 Touch [)ECO(-C<=8], and then touch [)=39=(
!3JHD3=HC:].
Your navigation system starts the route guidance.
<$+$3#('1&*&+"3*#("'&-"6&
%$*)32$>&/")&)$3$'#+-
The places that were previously set as destinations or waypoints
have been automatically stored in “SHG=C9K”.
H(%#")-
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch to show the next page.
4 Touch [SHG=C9K].
5 Touch the entry.
The searched location appears on the map screen.
6 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<,*)#&H(%#")-
Smart History suggests these previously used locations as des-
tinations based on your navigation habits, using parameters like
the current time of day, the day of week, and the current location.
Smart History items are shown in the “!8O(-C<=8(=CRRR” screen
for easy access.
!"#$%&'(')%"*
A0534<7.?8B-3858C01/7.5/7-.
(J
<$*)32('1&/")&*&+"3*#("'&6%('1&
U@",4('$>&<$*)32V
The “6C7TH:8?()8394E” feature lets you quickly find a place by
its name and search area.
p The “6C7TH:8?()8394E” function also searches your stored
data.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch [6C7TH:8?()8394E].
4 Touch the right text box to enter the country
and city/town.
5 Enter the name, address, or category of the
destination to the left text box, then touch .
6 Touch the entry.
The searched location appears on the map screen.
7 Touch the right of the list to narrow down the
search results.
If you touch a map data provider logo, you can
narrow down the list of results by showing the
results from the provider.
8 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<$*)32('1&/")&*&+"3*#("'&4-&#2$&
3"")>('*#$%
Entering a latitude and longitude pinpoints the location.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8].
3 Touch to show the next page.
4 Touch [6CC9?H:3=8G].
5 Enter the latitude value and touch ['A].
p When a value is already entered in the text field, delete the
value first.
p You can change the display format of the latitude and
longitude to any of the following formats: decimal degrees;
degrees and decimal minutes; or degrees, minutes and
decimal seconds.
When entering the coordinates in UTM format,
touch , then [U&,(6CC9?H:3=8G].
6 Enter the longitude value and touch [%CV].
p When a value is already entered in the text field, delete the
value first.
The searched location appears on the map screen.
7 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
<$*)32('1&/")&*&+"3*#("'&4-&
%3)"++('1&#2$&,*9
Specifying a location after scrolling the map enables you to set
the position as a destination or waypoint.
1 Press the ,"1 button.
2 Touch and drag the screen to scroll the map.
3 Touch the location that you want to select as
your destination.
The cursor appears.
4 Touch [)8B84=(3G(@8G=H:3=HC:], and then touch
[)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
=%('1&#2$&U;*9&C"3*#("'V&
%3)$$'
Once a location is searched, the “,3;(.C43=HC:” screen
appears. You can select some options for the route or displayed
map location before route calculation.
5 76
p If you touch the map, the cursor is placed at that position.
Also, you can scroll the map by dragging the map.
1 Zoom in/zoom out
p You can also pinch or expand the map to zoom in or out.
2 Cancels the “,3;(.C43=HC:” screen and displays the map of
the current position.
3 Returns the cursor to the initial position and the map scale
to the initial scale.
4 Shows the route setting preferences for route calculation.
Touch the keys to activate or deactivate the preference.
Calculates the route prioritising the use of
motorways when the key is activated.
Calculates the route prioritising the use of
per-use charged toll roads when the key is
activated.
Calculates the route prioritising the use of
ferries when the key is activated.
Calculates the route prioritising the use of car-
pool and HOV lanes when the key is activated.
5 Returns to the previous screen.
6 Sets the cursor position to your destination (or waypoint).
7 Displays the shortcuts.
@8=3HB8?($:QC973=HC::
Shows the detailed information of the point.
)3J8(.C43=HC::
Saves the displayed location as your favourite location.
The saved location can be easily recalled later.
1B348G("9C<:?(6<9GC9:
Searches for POIs around the displayed location. Touch
the POI to show the “,3;(.C43=HC:” screen, and also set
the POI as the destination (or waypoint).
!"#$%&'(')%"*
A0534<7.?8B-3858C01/7.5/7-.
('
;">(/-('1&#2$&)"6#$
When navigation is already started, there are several ways to
modify the current route. The following sections describe some
of those options.
.6(+>('1&*&)"6#$&6%('1&U8"6#$&
B+*''$)V
The “-C<=8(1B3::89” (or “,K(-C<=8”) feature lets you build your
route using the list of destinations.
Editing the list allows you to plan your route easily.
p Once you set the route, you can edit your route using the
menu displayed as “,K(-C<=8”.
1 Press the ,"1 button and touch .
2 Touch [-C<=8(1B3::89] or [,K(-C<=8].
3 Touch one of the options.
56
21 34
1 Starting position (The current vehicle position is set as
default and [6<998:=(%1)(1CGH=HC:] is displayed.)
Refer to Changing the starting position on page 18
2 Calculates the route and shows the “-C<=8()<7739K”
screen.
3 Displays the options for the location.
,CJ8(U;W,CJ8(@CO::
Edits the order you want to visit the locations.
@8B8=8:
Deletes the destination or waypoint.
)3J8(.C43=HC::
Stores the location in “)3J8?(.C43=HC:”.
Refer to Storing a location in “)3J8?(.C43=HC:” on page 20
6E3:D8:
Changes the destination or waypoint to another location.
)ECO(C:(,3;:
Shows the selected location on the map.
4 Displays the shortcuts.
@8B8=8("BB:
Deletes all waypoints and the destination. Touch
[6C:=H:<8(FH=EC<=(-C<=8] to cancel the planned route.
';=H7HG8(F3K;CH:=G:
Changes the order of waypoints automatically so that the
route can be easily travelled. (If the resulting order is the
same as the current order, this option is invalid.)
';=H7HG8(-C<=8:
Changes the order of all waypoints and the destination
automatically so that the route can be easily travelled. (If
the resulting order is the same as the current order, this
option is invalid.)
5 Inserts a new waypoint.
6 Adds a new destination and changes the current destination
to the last waypoint.
@2*'1('1&#2$&%#*)#('1&9"%(#("'
The starting position for route can be changed from the current
position.
1 Press the ,"1 button and touch .
2 Touch [-C<=8(1B3::89] or [,K(-C<=8].
3 Touch [6<998:=(%1)(1CGH=HC:].
4 Touch [)8=()=39=(1CH:=] or [6E3:D8()=39=(1CH:=]
and then touch ['A].
5 Search for a location.
6 Touch [)8=()=39=(1CH:=] or [6E3:D8()=39=(1CH:=].
The selected position is set as the starting position for route
calculation.
7 Touch [)ECO(-C<=8] or [6C:=H:<8(FH=EC<=(
-C<=8].
The system starts route recalculation after [)ECO(-C<=8] is
touched, and then the “-C<=8()<7739K” screen appears. After
[)=39=(!3JHD3=HC:] is touched, your navigation system starts the
route guidance.
After [6C:=H:<8(FH=EC<=(-C<=8] is touched, the current posi-
tion map appears.
8$%#")('1&#2$&36))$'#&9"%(#("'&*%&#2$&
%#*)#('1&9"%(#("'
1 Press the ,"1 button and touch .
2 Touch [-C<=8(1B3::89] or [,K(-C<=8].
3 Touch [6<998:=(%1)(1CGH=HC:].
4 Touch [2345(=C(%1)(1CGH=HC:] and then touch
[@8B8=8()=39=(1CH:=].
The starting position for route calculation returns to the current
position.
:>>('1&I*-9"('#%
1 Press the ,"1 button and touch .
2 Touch ["??(F3K;CH:=].
3 Search for a location.
4 Touch [)8B84=(3G(F3K;CH:=].
The route is recalculated, and the “-C<=8()<7739K” screen
appears. (When the waypoint is already set, the “,K(-C<=8”
screen appears. Touch [)ECO(-C<=8] and proceed to the next
step.)
5 Touch [)=39=(!3JHD3=HC:].
Your navigation system starts the route guidance.
@2$3A('1&)"6#$&*+#$)'*#(0$%
You can select another route and compare different route
alternatives.
1 Press the ,"1 button and touch .
2 Touch [@8=C<9G(X("B=89:3=HJ8G].
3 Touch ["B=89:3=HJ8(-C<=8G].
4 Touch any of the route calculate conditions.
You can see the approximate time required and total distance of
selected route alternatives. Touch any of the route alternatives to
see it on the map.
p If more than three route alternatives have been found, [,C98(
-8G<B=G] appears. Touch [,C98(-8G<B=G] to show the other
routes.
$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0
!"#$%&'(')%"*
$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0
(O
For information about route calculation conditions, refer
to -C<=8(1B3::H:D(,8=EC? on page 25
5 Touch [)8B84=].
The selected route is applied as your current route.
@2$3A('1&>$#"6)&)"6#$%
You can check for detour routes that avoid the selected sections
or streets, or that avoid the road ahead. You can also check for
alternative routes.
1 Press the ,"1 button and touch .
2 Touch [@8=C<9G(X("B=89:3=HJ8G].
3 Touch one of the options.
"B=89:3=HJ8(-C<=8G:
Shows the alternative routes.
Refer to Checking route alternatives on page 18
"JCH?();84H3B()84=HC:G:
Shows the route avoiding certain sections. Touch the list
item to select the section you want to avoid. The distance
and time difference, suggested route, current route, and
the section avoided are shown. Touch ["448;=] to apply the
suggested route.
UNHCÄ2ODBH×BÄ1N@C:
Shows the route avoiding certain road. Touch the list item to
select the road you want to avoid. Distance and time differ-
ence, suggested route, current route, section avoided are
shown. Touch ["448;=] to apply the suggested route.
"JCH?(-C3?("E83?:
Shows the route avoiding the road ahead. Touch [/] or [0] to
set the distance you want to avoid. Touch ["JCH?] to apply
the suggested route.
-8G=C98('9HDH:3B(-C<=8:
Cancels the route with avoidances and restores the previous
route.
p The route set by ["B=89:3=HJ8(-C<=8G] cannot be
cancelled.
@2$3A('1&)"6#$&('/"),*#("'&*'>&
9)$/$)$'3$%
Once you set the route, you can check a summary of the current
route.
1 Press the ,"1 button and touch .
2 Touch [-C<=8()<7739K].
3 Touch one of the options.
3
1 2
The conditions of the displayed route is shown in the upper left
by icon. The total length of the route and approximate required
time for the route in the lower left.
p You can scroll the map by dragging the map.
1 Shows alternative routes.
Refer to Checking route alternatives on page 18
2 Displays the shortcuts.
-C<=8(198Q898:48G:
Shows the route setting preferences. If you change the
preferences, the route is recalculated.
$=H:8939K:
Shows all transit points in detail. Touch a transit point to
show its position on the map. If you touch ["JCH?] on the
map screen, the route is recalculated avoiding the transit
point (as much as possible).
)3J8(-C<=8:
Saves the displayed route. The saved route can be recalled
later.
1B348G("BC:D(-C<=8:
Searches for POIs along the displayed route. Touch the
POI to show the “,3;(.C43=HC:” screen, and also set the
POI as a waypoint.
)H7<B3=HC::
You can run a simulation of the navigation for the current
route, as a demonstration.
Refer to Watching the simulation of the route on page 19
3 Shows the information for a transit point on the route.
Touching the items allows you to see the location on the
map. Touch ["JCH?] and ["448;=] to set the location as a
location to avoid.
@*'3$++('1&#2$&36))$'#&)"6#$&
16(>*'3$
If you no longer need to travel to your destination, follow the
steps below to cancel the route guidance.
1 Press the ,"1 button and touch .
2 Touch [63:48B(-C<=8] or [@8B8=8(F3K;CH:=].
3 Touch one of the options.
If there are no waypoints on the route, touch [63:48B(-C<=8] to
cancel the route.
If there are waypoints on the route, touch [63:48B(-C<=8] to
cancel the route. Touch [@8B8=8(F3K;CH:=] to delete only the
nearest waypoint. In such case, the route is recalculated.
W*#32('1&#2$&%(,6+*#("'&"/&#2$&)"6#$
You can run a simulation of the navigation for the current route,
as a demonstration.
1 Set a route to your destination.
Refer to Searching for a destination on page 14
2 Press the ,"1 button and touch .
3 Touch [-C<=8()<7739K], and then touch .
4 Touch [)H7<B3=HC:].
The simulation starts from the starting point of the route, and
using a realistic speed, it leads you through the whole recom-
mended route.
Touch [6BCG8] to stop the simulation.
!"#$%&'(')%"*
$<04D7.?85.C8@-C7BE7.?8/<0846330./83-6/0
+Z
<#")('1&*&+"3*#("'&('&U<*0$>&
C"3*#("'V
Storing your favourite locations in “)3J8?(.C43=HC:” allows you
to save the time and effort used on re-entering this information.
“)3J8?(.C43=HC:” can include your home location, workplace,
and places you have already registered.
<#")('1&-"6)&2",$&*'>&-"6)&I")AG
9+*3$&+"3*#("'
You can store one home location and one workplace location.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8], and then [)3J8?(.C43=HC:].
You can also display the “)3J8?(.C43=HC:” screen by touching
on the bottom of the screen when the navigation menu is
displayed.
3 Touch [SC78] or [FC95] and then touch ['A].
p When you have already stored your home or workplace,
touch [SC78] or [FC95] to show the location on the “,3;(
.C43=HC:” screen.
4 Search for a location.
Refer to Searching for a destination on page 14
5 Touch ["??(=C()3J8?(.C43=HC:G].
The cursor position has been stored.
<#")('1&-"6)&/*0"6)(#$&+"3*#("'%
You can store a frequently visited location (such as a relative’s
home) to allow easy routing.
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8], and then [)3J8?(.C43=HC:].
You can also display the “)3J8?(.C43=HC:” screen by touching
on the bottom of the screen when the navigation menu is
displayed.
3 Touch ["??(.C43=HC:].
4 Search for a location.
Refer to Searching for a destination on page 14
5 Touch ["??(=C()3J8?(.C43=HC:G].
6 Enter the name if needed and then touch
.
The cursor position has been stored.
p In the on-screen keyboard, touching or enables you to
store the location as your home or workplace location.
F>(#('1&%#")$>&+"3*#("'%
Stored locations can be edited.
<I(#32('1&#"&#2$&$>(#&,">$
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8], and then [)3J8?(.C43=HC:].
3 Touch , and then touch [+?H=].
The “)8B84=(.C43=HC:(=C(+?H=” screen appears.
8$'*,('1&%#")$>&+"3*#("'%
1 Switch to the edit mode.
Refer to Switching to the edit mode on page 20
2 Touch the item you want to rename and touch
[-8:378].
p “SC78”and “FC95” cannot be renamed. The location can be
set again.
3 Enter the name and then touch .
4 Touch [@C:8].
5$+$#('1&%#")$>&+"3*#("'%
1 Switch to the edit mode.
Refer to Switching to the edit mode on page 20
2 Touch the item you want to delete and touch
[@8B8=8].
p “SC78” and “FC95” cannot be deleted. The location can be
set again.
p If you touch and then touch [@8B8=8("BB], all entries
(including the home and workplace locations) can be
deleted.
A message will appear asking you to confirm the deletion.
3 Touch ['A].
4 Touch [@C:8].
<#")('1&*&)"6#$&('&U<*0$>&
8"6#$%V
Storing your favourite routes in “)3J8?(-C<=8G” allows you to
save the time and effort used on re-entering this information.
1 Set a route to your destination.
Refer to Searching for a destination on page 14
2 Press the ,"1 button and touch .
3 Touch [-C<=8()<7739K], and then touch .
4 Touch [)3J8(-C<=8].
5 Enter the name if needed and then touch
.
F>(#('1&#2$&%#")$>&)"6#$
Stored routes can be edited.
8$'*,('1&%#")$>&)"6#$%
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8], and then .
3 Touch [)3J8?(-C<=8G].
4 Touch , and then touch [+?H=].
5 Touch the item you want to rename and touch
[-8:378].
6 Enter the name and then touch .
7 Touch [@C:8].
5$+$#('1&%#")$>&)"6#$%
1 Press the ,"1 button and touch .
2 Touch [!8O(-C<=8], and then .
3 Touch [)3J8?(-C<=8G].
4 Touch , and then touch [+?H=].
5 Touch the item you want to delete and touch
[@8B8=8].
p If you touch and then touch [@8B8=8("BB], all entries can
be deleted.
6 Touch [@8B8=8].
F0?71/037.?85.C80C7/7.?8G-45/7-.185.C83-6/01
!"#$%&'(')%"*
F0?71/037.?85.C80C7/7.?8G-45/7-.185.C83-6/01
+(
<*0('1&*&+"3*#("'&*%&*'&*+$)#&
9"('#
Important
The warning for road safety cameras (like speed cameras) is
disabled when you are in certain countries where warnings
for road safety cameras are prohibited. However, you are
fully responsible for ensuring that this feature is legal in the
country where you intend to use it.
You can save any map location (such as a school zone or railroad
crossing) as an alert point.
p To use this function, activate the warnings beforehand and
set the alert types.
Refer to “F39:H:DG” settings on page 26
1 Press the ,"1 button.
2 Scroll the map and select a location.
The cursor appears at the selected point.
3 Touch .
4 Touch ["??("B89=(1CH:=G].
5 Set the necessary parameters.
"B89=(&K;8:
Sets the type of the alert point.
);88?(.H7H=:
Sets the speed limit for this alert point (if applicable).
@H984=HC::
Sets the direction from which you expect the alert to come
from.
6 Touch [)3J8].
p In ["B89=(&K;8], speed camera alert cannot be selected when
the cursor is placed on the map of France.
F>(#('1&#2$&%#")$>&*+$)#&9"('#%
Stored alert points can be edited.
1 Press the ,"1 button.
2 Scroll the map and move the cursor over the
stored alert point, and then touch .
3 Touch [+?H=("B89=(1CH:=G].
4 Set the necessary parameters.
If you touch and then touch [@8B8=8], the
selected alert point will be deleted.
5 Touch [+?H=].
The Traffic Message Channel (TMC) provides real-time traffic
reports. If the navigation system is equipped with the TMC
feature, you can check the traffic reports and information
received.
p The online function in “3Q@E×B” can be used if you connect
an iPhone or a smartphone that has the "#$6)*!6(";;
installed.
Be sure read Expanding the use of the navigation functions
(page 29) before using the "#$6)*!6 function.
#HROK@XHMFÐSGDÐj3Q@EÆBÐ
<6,,*)-V&%3)$$'
1 Press the ,"1 button and touch .
2 Touch [3Q@E×B].
The “3Q@E×BÄ2 T L L @ Q X ” screen appears.
5HDVHMFÐSGDÐSQ@EÆBÐKHRS
Traffic information is displayed onscreen in a list. This allows you
to check how many traffic incidents have occurred, the loca-
tions, and the distance from your current position.
1 Display the “3Q@E×BÄ2TLL@QX” screen.
Refer to Displaying the “3Q@E×BÄ2 TLL@QX” screen on page
21
2 Touch [3Q@E×BÄ$UDMSR].
A list with traffic information that has been received is shown.
The list is sorted by distance from your current position. Places
(street names) where incidents have occurred are displayed on
the list.
5HFHLYLQJUHDOWLPHWUDI¿FLQIRUPDWLRQ70&
!"#$%&'(')%"*
F0?71/037.?85.C80C7/7.?8G-45/7-.185.C8
3-6/01
F0407>7.?8305G%
WLPHWUDI¿FLQIRU%
PDWLRQ70&
++
p If a route is set, relevant events for your current route are
shown in the upper section of the list.
p Touching the desired item allows you to check its position on
the map. Touch or to show the previous or next event.
"GDBJHMFÐSGDÐSQ@EÆBÐHMBHCDMSRÐ
"'&#2$&,*9
Traffic event information can be displayed on the map.
1 Display the “3Q@E×BÄ2TLL@QX” screen.
Refer to Displaying the “3Q@E×BÄ2 TLL@QX” screen on page
21
2 Touch [3Q@E×BÄ,@O].
Road segments affected by traffic incidents are displayed in an
alternate colour on the map, and small symbols above the road
show the nature of the incident.
The traffic jam lines indicate the degree of the traffic jam by
colour.
6GDMÐSQ@EÆBÐHMBHCDMSRÐNBBTQÐNMÐ
-"6)&)"6#$
The notification icon shows the status of traffic information
reception.
1 Touch the relevant traffic event icon on the
map.
1
1 Traffic notification icon
Indicates that there are no traffic incidents in
your coverage area.
Indicates that information on traffic incidents
are being received.
Indicates that there are no significant traffic
incidents on your route.
Indicates that there are significant traffic
incidents on your route. The icon shows the
type of the next traffic incident.
You can check the details of the traffic incidents. Touch the
relevant event to display the location on the map.
3TQMHMFÐSGDÐSQ@EÆBÐHMENQL@SHNMÐ
"'&")&"//
The traffic information feature is turned on by default. To enable
or disable the TMC feature, perform the following procedure.
p If you turn the traffic information feature off, [3Q@E×B] on the
navigation menu disappears.
1 Press the ,"1 button and touch .
2 Touch , and then touch [)8==H:DG].
3 Touch , and then touch [3Q@E×B].
4 Touch [3Q@E×B] to turn the switch on or off.
5(%9+*-('1&#2$&U=%$/6+&
D'/"),*#("'V&,$'6
The “UG8Q<B($:QC973=HC:” menu contains various information to
support your driving.
p To use the online functions (“1395H:D”, “F83=E89” and
“L<8B(19H48G”), the appropriate content installation must be
installed in the navigation system and a connection with
an iPhone or a smartphone that has the "#$6)*!6(";;
installed must be established.
Be sure read Expanding the use of the navigation functions
(page 29) before using the "#$6)*!6 function.
1 Press the ,"1 button and touch .
2 Touch [UG8Q<B($:QC973=HC:].
The “UG8Q<B($:QC973=HC:” screen appears.
Information on each option in the “Useful
Information” menu
1395H:D:
Checks for car parks near your current location.
Refer to the manual for "#$6)*!6 on our website
L<8B(19H48G:
Displays recent fuel prices of petrol stations near the current
location, along the current route, or in the town.
Refer to the manual for "#$6)*!6 on our website
F83=E89:
Checks the weather forecast for your current location, along
your route, around your destination, as well as for your saved
locations.
Refer to the manual for "#$6)*!6 on our website
FE898("7($Y:
Displays a special screen with information about the current
position and a key to search for nearby emergency or road-
side assistance services.
p To save the current position as a “)3J8?(.C43=HC:” desti-
nation, touch .
Refer to Storing a location in “)3J8?(.C43=HC:” on page 20
p To check the country information of your current position,
touch .
S8B;(!839TK:
Checks for POIs in your surroundings.
The preset search categories are as follows.
— 639(-8;3H9:
— S83B=E:
$<04D7.?8610B6G87.B-3@5/7-.85H-6/8E-638/379
!"#$%&'(')%"*
5HFHLYLQJUHDOWLPHWUDI¿FLQIRUPDWLRQ
70&
$<04D7.?8610%
B6G87.B-3@5/7-.8
5H-6/8E-638/379
+S
— 1CBH48:
— 18=9CB()=3=HC::
6C<:=9K($:QC973=HC::
Checks for useful driving information about the selected
country (for example, speed limits and maximum blood
alcohol level).
p This information may not necessarily correspond to the
actual regulations, etc. Utilize the information for your
reference.
&9H;(,C:H=C9:
Checks the statistical data of your trips (for example, start
time, end time, average speed, etc.).
Refer to Recording your travel history on page 23
%1)($:QC973=HC::
Displays the GPS information screen with satellite position
and signal strength information.
L<8B(6C:G<7;=HC::
You can estimate the fuel cost to your destination by entering
the fuel consumption information in the navigation system.
Refer to Calculating the fuel consumption on page 24
8$3")>('1&-"6)&#)*0$+&2(%#")-
Activating the trip logger enables you to record your driving
history (hereinafter called “trip log”). You can review your trip
log later.
p The trip logger is set so that it can be started manually by
default. You can change the settings of this function in order
to save the log automatically.
Refer to “&9H;(,C:H=C9” settings on page 28
:3#(0*#('1&#)(9&+"11$)&#$,9")*)(+-
One-time activation is useful if you want to create a log only for
a particular trip.
1 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
2 Touch [&9H;(,C:H=C9].
A list of trip logs already recorded appears. A blank list appears if
you have not recorded any trip logs yet.
3 Touch [)=39=(!8O(-84C9?H:D].
The trip logger is activated. The touch key changes to [)=C;(
-84C9?H:D]. Touching [)=C;(-84C9?H:D] allows you to deactivate
the trip logger.
p If there is not enough space in the built-in memory, the
oldest trip log will be overwritten by the new one.
p If you want the system to always activate the trip logger
whenever the GPS signal is available, turn on “+:3TB8(
"<=CZ)3JH:D”.
Refer to Setting the trip logger on page 23
.)"I%('1&#2$&#)(9&+"1
1 Record the trip log.
2 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
3 Touch [&9H;(,C:H=C9].
p To export all trip logs, touch [+I;C9=("BB].
4 Touch any of the items to see the details.
p To display the trip log on the map, touch [#HGHTB8(C:(,3;] to
tick the check box.
Touching allows you to view the shortcuts and enables you to
use the following functions.
#H8O(C:(,3;
Shows the trip log on the map screen.
+I;C9=(&9345(.CD:
Exports the track log currently selected to an external stor-
age device.
<$##('1&#2$&#)(9&+"11$)
1 Record the trip log.
2 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
3 Touch [&9H;(,C:H=C9].
4 Touch and then touch [&9H;(,C:H=C9(
)8==H:DG].
5 Touch any of the items to change the settings.
+:3TB8("<=CZ)3JH:D:
Sets whether automatic trip logging is activated or not.
)3J8(&9345(.CD:
Track logs, the sequence of the positions given by the GPS
receiver, can be saved together with trip logs. You can acti-
vate the track logger whenever the trip logger is activated.
p “3QHOÄ#@S@A@RD Ä2HYD” indicates the current data size of the
trip log (track log included).
F>(#('1&*&#)(9&+"1
1 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
2 Touch [&9H;(,C:H=C9].
3 Touch and then touch [+?H=].
4 Touch any of the items to edit.
@8B8=8:
Deletes the trip log.
-8:378:
Renames the trip log.
6E3:D8(6CBC<9:
Changes the colour by selecting another colour from the
colour table.
p If you touch and then touch [@8B8=8("BB], all entries can
be deleted.
5 Touch [@C:8].
=%('1&#2$&?)(9&@",96#$)&,">$
In the trip computer screen, the information received from the
GPS receiver and your vehicle is displayed like a metre for a
vehicle.
1 Press the ,"1 button.
2 Touch the data field key.
p If you touch [&9H ; ()<7739K], the details of the current trip
are displayed. Touch [)3J8(&9H;] to store the current trip log.
p If you press the ,"1 button, you can return to the map
screen.
!"#$%&'(')%"*
$<04D7.?8610B6G87.B-3@5/7-.85H-6/8E-638/379
+&
@*+36+*#('1&#2$&/6$+&
3"'%6,9#("'
The fuel consumption monitor helps you keep track of the fuel
consumption of your car even if you do not use the navigation
system for all your journeys. Set the initial odometer value and
then record the distance driven and the amount of fuel whenever
you fill up your car. You can also set reminders for regular car
maintenance.
These calculations are based only on the information that
you provide and not on any data from the vehicle. The fuel
mileage displayed is only a reference value, and does not
guarantee that the fuel mileage displayed can be obtained.
<$##('1&#2$&('(#(*+&">",$#$)&0*+6$
Before you use the fuel consumption feature, enter the initial
odometer value from which you want to start measuring the
mileage.
1 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
2 Touch [L<8B(6C:G<7;=HC:].
3 Touch [$:H=H3B(,HBC78=89(#3B<8].
4 Enter the initial odometer value and then touch
.
The initial odometer value has been set.
F'#$)('1&#2$&/6$+&3"'%6,9#("'&
('/"),*#("'
To calculate the fuel consumption for the distance you have trav-
elled, enter the distance driven and the amount of fuel whenever
you fill up your car.
1 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
2 Touch [L<8B(6C:G<7;=HC:].
3 Touch ["??].
4 Touch [6<998:=(,HBC78=89(#3B<8] and then
enter the current odometer value.
5 Touch [L<8B("7C<:=] to enter the amount of
fuel pumped this time.
6 Touch [L<8B(19H48(W(U:H=] to enter the fuel unit
price this time.
7 Touch ["??].
8 Touch [@C:8].
p To delete an entry, touch to display the shortcut for
deletion.
<$##('1&#2$&3*)&,*('#$'*'3$&%32$>6+$
1 Display the “UG8Q<B($:QC973=HC:” menu.
Refer to Displaying the “UG8Q<B($:QC973=HC:” menu on page
22
2 Touch [L<8B(6C:G<7;=HC:].
3 Touch .
4 Touch [,3H:=8:3:48()4E8?<B8].
5 Touch ["??] or the one of entries.
6 Enter the name, date, and mileage for the
reminder.
7 Touch [@C:8].
p To delete an entry, touch to display the shortcut for
deletion.
@6%#",(%('1&#2$&'*0(1*#("'&
%$##('1%
You can configure the navigation settings, and modify the
behaviour of this system.
1 Press the ,"1 button and touch .
2 Touch , and then touch [)8==H:DG].
The “)8==H:DG” screen appears.
-C<=8(198Q898:48G:
Sets the type of vehicle you are driving, the road types used
in route planning, and the route planning method.
Refer to “-C<=8(198Q898:48G” settings on page 25
)C<:?:
Adjusts the different sound volumes and changes the voice
guidance profile.
Refer to “)C<:?” settings on page 26
F39:H:DG:
Enables or disables warnings and sets up the warning function.
Refer to “F39:H:DG” settings on page 26
!3JHD3=HC:(,3;:
Fine-tunes the appearance of the map screen and adjusts
how the software helps you navigate with different kinds of
route-related information on the map screen.
Refer to “!3JHD3=HC:(,3;” settings on page 27
-8DHC:3B:
Changes the voice guidance language, the application
language, and measurement units.
Refer to “-8DHC:3B” settings on page 27
@HG;B3K:
Sets separate themes for daytime and nighttime use,
adjusts the display backlight, and enables or disables menu
animations.
Refer to “@HG;B3K” settings on page 28
3Q@E×B:
Enables or disables the traffic information feature.
Refer to “3Q@E×B” settings on page 28
F83=E89:
Enables or disables the online weather forecast option and
the automatic download of weather information.
Refer to the manual for "#$6)*!6 on our website
L<8B:
Enables or disables the online fuel price option and sets up
the fuel type.
Refer to the manual for "#$6)*!6 on our website
$61/-@717.?8930B030.4018-B8/<08.5>7?5/7-.
!"#$%&'(')%"*
$<04D7.?8610B6G87.B-3@5/7-.85H-6/8E-638
/379
$61/-@717.?8
930B030.4018-B8
/<08.5>7?5/7-.
+D
&9H;(,C:H=C9:
Turns automatic trip log saving on or off and checks the
current size of the trip database.
Refer to “&9H;(,C:H=C9” settings on page 28
"#$6)*!6
Displays the connection method for "#$6)*!6.
p The setting value is fixed. Use this product as it is.
':BH:8()89JH48G:
Enables or disables the connected services.
Refer to “':BH:8()89JH48G” settings on page 28
2S@QSÄ"NM×FTQ@SHNMÄ6HY@QC:
Modifies the basic software parameters used during the
initial setup process.
)K:4&CCB:
Starts the synchronisation tool, which makes it possible to
update your maps.
Refer to Getting the map update on page 29
8$%#")('1&#2$&>$/*6+#&%$##('1%
You can restore settings or recorded content to the default
settings.
1 Press the ,"1 button and touch .
2 Touch , and then touch [)8==H:DG].
3 Touch .
4 Touch [-8G8=("BB()8==H:DG].
5 Touch ['A].
The recorded contents are cleared.
p If you touch [L34=C9K(-8G8=] on the shortcut, all data rele-
vant to navigation (including the items in saved locations
and histories) are deleted and all settings are reset to their
factory defaults.
D'/"),*#("'&"'&$*32&"9#("'&"/&
U<$##('1%V
U8"6#$&B)$/$)$'3$%V&%$##('1%
J$2(3+$
You can set the type of vehicle you will be using on the route.
p The route is planned based on the selected vehicle type.
Route planning can also be configured to incorporate
dimension, weight, and freight hazard restrictions for maps
that contain such data.
To enhance the route accuracy, correctly select a vehicle
type that is similar to the condition of your vehicle.
639:
— Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
— Roads are used only if access for cars is allowed.
— Private roads and resident-only roads are used only if they
are inevitable to reach the destination.
— Walkways are excluded from routes.
+789D8:4K:
— All manoeuvres available at intersections are taken into
account.
— Directional constraints are taken into account in the same
way as travel in the opposite direction is allowed at low
speeds.
— Only private roads that need to be used to access the
destination are included.
— Walkways are excluded from routes.
2<G:
— Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
— Roads are used only if access for buses is allowed.
— Private roads, resident-only roads and walkways are
excluded from routes.
&3I H :
— Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
— Roads are used only if access for taxis is allowed.
— Private roads, resident-only roads and walkways are
excluded from routes.
.C99K:
— Manoeuvre restrictions and directional constraints are
taken into account when planning a route.
— Only roads that allow lorry access are included.
— Private roads, resident-only roads and walkways are
excluded from routes.
— U-turns are not used in routes (turning around on a
divided road is not considered a U-turn for the purpose of
this system).
p To edit the name and estimated maximum speed of the
selected vehicle profile, touch .
p To add a new vehicle profile, touch [ CCÄ/QN×KD]. Then select
one of the vehicle types and set the name and estimated
maximum speed.
8"6#$&B+*''('1&;$#2">
You can change the route planning method. Route calculation
can be optimised for different situations and vehicle types by
changing the planning method. The route planning method
types are as follows.
L3G=
Calculates a route with the shortest travel time to your
destination as a priority. Usually the best selection for fast
and standard cars.
+3GK
Results in a route with fewer turns and no difficult manoeu-
vres. With this option, you can make this system to take, for
example, the motorway instead of a series of smaller roads
or streets.
)EC9=
Calculates a route with the shortest distance to your destina-
tion as a priority. Usually practical for slower vehicles. Rarely
practical to use to search for shorter routes for normal
vehicles regardless of the speed.
+4C:C7H43B
Calculates a route that is quick and saves fuel.
!*0(1*#("'&;">$
You can enable or disable off-road navigation.
':Z9C3?
The route is planned towards the destination along the roads
on the map.
'QQZ9C3?
The route is planned towards the destination in a straight
line, not along the roads on the map.
;"#")I*-%
When this function is turned off, the route is calculated prioritis-
ing the avoidance of motorways.
This function is useful when you want to avoid motorways when
you are driving a slow car or you are towing another vehicle.
B$)(">&@2*)1$
When this function is turned off, the route is calculated prioritis-
ing the avoidance of toll roads.
This function is useful when you want to avoid toll roads with
restricted time access that require you to purchase a separate
pass or vignette to extend the length of time allotted for use.
p This option can be enabled or disabled separately from the
pre-use toll road usage option.
B$)G6%$&?"++
When this function is turned off, the route is calculated prioritis-
ing the avoidance of per-use charged toll roads.
This function is useful when you want to avoid toll roads where
there is a per-use charge.
P$))($%
When this function is turned off, the route is calculated prioritis-
ing the avoidance of ferries.
!"#$%&'(')%"*
$61/-@717.?8930B030.4018-B8/<08.5>7?5/7-.
+V
@*)&<26##+$&?)*('%
When this function is turned off, the route is calculated prioritiz-
ing the avoidance of car shuttle trains.
Car shuttle trains are used to transport vehicles for relatively
short distances and they usually connect places that are not
easily accessible by road.
@*)9""+&C*'$%
When this function is turned off, the route is calculated prioritiz-
ing the avoidance of carpool and HOV lanes.
p The navigation system avoids carpool and HOV lanes by
default.
='9*0$>&8"*>%
When this function is turned off, the route is calculated prioritis-
ing the avoidance of unpaved roads.
p The navigation system avoids unpaved roads by default.
U<"6'>V&%$##('1%
p The following settings marked with an asterisk (*) are
enabled only when a TTS-voice is selected for the voice
language.
J"(3$
You can adjust the volume of the guidance sounds (verbal
instructions).
:+$)#&.$$9%
You can adjust the volume of the non-verbal alert sounds
(beeps).
5('1
You can turn off the attention tone that precedes the verbal
instructions or adjust its volume.
J"(3$&X6(>*'3$
You can enable or disable voice guidance.
p This function is enabled by default.
:''"6'3$&<#)$$#%&*'>&8"*>%&('&!*#(0$&
C*'16*1$&:)$*Y
You can select whether to have the navigation system announce
the street names in the native language of the area, only the road
numbers, or only the manoeuvres.
:''"6'3$&<#)$$#%&*'>&8"*>%&('&
P")$(1'&C*'16*1$&:)$*Y
You can select whether to have the navigation system read the
street names in a foreign country, only the road numbers, or only
the manoeuvres.
F*)+-&D'>(3*#("'&"/&;*'"6$0)$%
You can select whether you want an immediate announcement
for the next manoeuvre or to receive the information when the
manoeuvre is near.
J$)4"%(#-&C$0$+
You can set the verbosity of the voice instructions: how much
information is given and how often the prompts occur.
,H:H73B: Voice instructions are given once right before the
next manoeuvre.
,8?H<7: Voice instructions are given once as the vehicle
approaches the next manoeuvre and it is repeated right
before the manoeuvre.
#89TCG8: Voice instructions are given once relatively far from
the next manoeuvre, it is repeated as the vehicle approaches
the next manoeuvre, and it is repeated again right before the
actual manoeuvre.
:''"6'3$&8"6#$&<6,,*)-Y
You can select whether to have the navigation system announce
by voice a quick summary of the route whenever a route is
calculated.
:''"6'3$&@"6'#)-&D'/"Y
When you cross country borders, this navigation system can
read out information about the country you have just entered.
MMNTMBDÐ3Q@EÆBÐ(MEN
You can select whether to have the navigation system announce
by voice the traffic information whenever a traffic incident on
your route is received.
:''"6'3$&<-%#$,&;$%%*1$%Y
When a system message appears, this navigation system can
read out the message.
UW*)'('1%V&%$##('1%
Important
This system is able to warn you if you exceed the current
speed limit. This information may not be available for
your region (ask your local dealer), or may not be fully
correct for all roads on the map.
You are liable for ensuring that using this feature is legal
in the country where you intend to use it.
<9$$>&W*)'('1
F39:(FE8:();88?H:D
You can select whether you want to receive visible and/or
audible warnings.
The following alert types are available:
— "<?HC(3:?(#HG<3B: When selected, audible and visible
warnings will go off when you exceed the speed limit.
— #HG<3B: When selected, visible warnings will go off when
you exceed the speed limit.
— @HG3TB8?: When selected, no warnings will go off.
);88?(.H7H=("BO3KG(#HGHTB8
You can select whether you want to see the speed limit sign
on the map all the time. When you set the speed limit to
always be visible, the colour of the speed limit sign changes
when you exceed the speed limit.
'<=GH?8(&CO:G[(\\\](CQ(=E8();88?(.H7H=
You can receive a warning when you reach the set percent-
age of the speed limit in rural areas.
FH=EH:(&CO:G[(\\\](CQ(=E8();88?(.H7H=
You can receive a warning when you reach the set percent-
age of the speed limit in urban areas.
:+$)#&B"('#%
This setting allows you to receive a warning when approaching
alert points like school zones or railroad crossings.
Refer to Setting the alert point warnings on page 28
W*)'('1&8"*>&<(1'%
Maps may contain driver alert information. Touch this key to turn
on or off these warnings and to set the distance from the hazard
to receive the warning at. These can be set individually for the
different warning types.
!"#$%&'(')%"*
$61/-@717.?8930B030.4018-B8/<08.5>7?5/7-.
+J
U!*0(1*#("'&;*9V&%$##('1%
;*9&5(%9+*-
You can see the effect when you change a setting.
#H8O;CH:=
You can adjust the basic zoom and tilt levels to your needs.
Some preset levels are available. If you select “,3:<3B”, you
can store adjusted map scales and view angles.
6CBC<9(,C?8
You can switch between daytime and nighttime colour
modes or let the software switch between the two modes
automatically a few minutes before sunrise and a few min-
utes after sunset.
@3K(,3;(6CBC<9
You can select the colour scheme used in the daytime map.
!HDE=(,3;(6CBC<9
You can select the colour scheme used in nighttime map.
.3:?7395G
This setting shows or hides 3D landmarks which are 3D
artistic or block representations of prominent or well-known
objects.
p LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
This function becomes effective only when the additional
map data is installed.
2<HB?H:DG
This setting shows or hides 3D city models which are 3D
artistic or block representations of complete city building
data containing actual building sizes and actual positions
on the map.
p LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
This function becomes effective only when the additional
map data is installed.
^@(&8993H:
This setting shows or hides the 3D elevation of the surround-
ing terrain.
&9345(.CDG
You can turn on or off track log saving which saves the
sequence of the locations you go through on your journeys.
1B348(,39589G
You can select which POI icons to show on the map while
navigating.
p When a large number of POI icons exist on a map display,
maps and POI icons become hard to see. To maintain
map and POI visibility, reduce the displayed categories as
much as possible.
5*#*&P($+>%
You can choose to have different values displayed for when nav-
igating a route to a select destination and for when just cruising
around without any particular destination.
Refer to Browsing the data field on page 14
“LH9G=”, “)84C:?” and “&EH9?” selects items displayed in the data
fields shown when the route exists. “FH=EC<=(-C<=8” selects
the items displayed in the data fields shown when a route does
not exist.
8"6#$&B)"1)$%%&.*)
You can turn on the route progress bar to display the current
route as a straight line located on the right side of the map. The
arrow represents your current position and moves up the line as
you travel along the route.
K//$)&;"#")I*-&<$)0(3$%
You may need to stop by a petrol station or a restaurant during
your journey.
Refer to Frequently shown route events on page 13
<$)0(3$%&5(%9+*-$>
You can select the service types displayed for the motorway exits
or service stations. Choose from the POI categories.
:6#",*#(3&K0$)0($I
When selected, the map zooms out to show an overview of the
surrounding area if the next route event (manoeuvre) is far.
When you get close to the event, the map returns to the normal
map view.
<(1'9"%#%
Whenever adequate information is available, lane information
similar to the real ones on road signs above the road is displayed
at the top of the map. You can turn this feature on or off.
R6'3#("'&J($I
If you are approaching a motorway exit or a complex intersection
and the necessary information is available, the map is replaced
with a 3D view of the junction.
?6''$+&J($I
When entering tunnels, the surface roads and buildings can
be distracting. This feature shows a generic picture of a tunnel
instead of the map. A top-down overview of the tunnel and
remaining distance are also displayed.
K//$)&@"'1$%#("'&5$#"6)&"'&H(12I*-%
When you slow down while driving on a motorway due to a traffic
jam, this navigation system offers you a detour using the next
exit. The message shows you the distance to the exit and the
difference in the distance and estimated time compared to the
original route. You can choose from one of the following options:
Touch [@HG7HGG] or just ignore the message if you want to
keep the original route.
Touch [198JH8O] to see an overview of the original route and
the detour to make the decision. You can accept the detour
as shown in the preview, or increase the motorway segment
bypassed before accepting.
Turn to the suggested new direction and the route will be
automatically recalculated.
K//$)&8$*+&?(,$&:+#$)'*#(0$&8"6#$%
Alternative routes can be suggested when driving on normal
roads. This navigation system will select a different turn in the
upcoming intersection and offer you a different route for the next
section of the route. You cannot, however, modify the offered
detour.
K//$)&B*)A('1&:)"6'>&5$%#('*#("'
Parking at the destination may not be easy to find in city areas.
As you approach the destination, this navigation system can
offer parking category places near your destination. Touch
to open a top-down map with the destination and the offered
parking places. The route is calculated by selecting one of the
parking places.
K//$)&H('#%&=9"'&5$#"6)
If you leave the recommended route and suddenly exit the motor-
way, this navigation system offers different alternatives near the
exit like petrol stations or restaurants. Also, if there are avoidable
parts of the original route ahead (like a tunnel, a toll road or a
ferry), you will find them in the list in case you want to bypass
them with the help of this navigation system.
U8$1("'*+V&%$##('1%
C*'16*1$
This key displays the current language of the user interface. By
touching the key, you can select a new language from the list of
available languages. This system will restart if you change this
setting.
J"(3$&C*'16*1$
This key displays the current voice guidance profile. By touching
the key, you can select a new voice guidance language from the
list of available languages and speakers. Touch any of these keys
to hear a sample voice prompt.
='(#%&*'>&P"),*#%
You can set the various units to be used by this system.
!"#$%&'(')%"*
$61/-@717.?8930B030.4018-B8/<08.5>7?5/7-.
+'
p This system may not support all the listed units in some
voice guidance languages.
@HG=3:48
The unit of distance can be changed.
L<8B(+4C:C7K
The unit of fuel mileage can be changed.
F8HDE=
The unit of weight can be changed.
&87 ; 89 3 =< 9 8
The unit of temperature can be changed.
6CC9?H:3=8(@HG;B3K(LC973=
The format of the coordinates can be changed.
6<998:4K
The currency unit can be set.
?(,$&L"'$
By default, the time zone is taken from the map information and
adjusted according to your current location.
"<=C73=H4(&H78(_C:8
The time zone setting changes automatically.
,3:<3B(&H78(_C:8
The present setting value for the time difference and daylight
saving time that you set are used.
,3:<3B(&H78(_C:8(HQ("<=C(U:3J3HB3TB8
The time zone setting changes automatically if automatic
change is available. Otherwise, the present setting value that
you set is used.
,3:<3B(&H78(_C:8(H:(6<998:=(_C:8
The present setting value that you set are used in the current
time zone. If your vehicle moves to another time zone, the
time zone setting changes automatically.
p If a setting other than “"<=C73=H4(&H78(_C:8” is selected,
“&H78(_C:8” (the option to set the time difference manually)
and “@3KBHDE=()3JH:D(&H78” (the option to turn on or off
daylight saving time) can also be set.
U5(%9+*-V&%$##('1%
;$'6&:'(,*#("'%
When animation is turned on, the keys on the menus and key-
board screens appear in an animated way. Screen transitions
are also animated.
5*-&<A('&?2$,$
You can select the style and colours of the navigation menu used
in the daytime.
!(12#&<A('&?2$,$
You can select the style and colours of the navigation menu used
in the nighttime.
j3Q@EÆBkÐRDSSHMFR
3Q@EÆB
You can set to enable or disable the TMC receiver that can
receive real-time traffic information.
5*#*&<"6)3$
You can select what data source you want to use for receiving
real-time traffic information. [':BH:8] is available only if the
device is enabled.
4RDÐ3Q@EÆBÐ(MEN
You can select whether to have traffic incidents be taken into
consideration when the route is calculated.
2GNVÐ3Q@EÆBÐ(MEN
You can select whether to show icons relevant to traffic incidents
and lines indicating the traffic flow on the map.
'QQ
No traffic icons or lines indicating the traffic flow are shown.
6CBC<9
Only the line relevant traffic incidents are shown on the map.
6CBC<9(":?($4C:
Icons for the relevant traffic incidents and lines indicating
the traffic flow are shown on the map.
2GNVÐ%QDDÐ3Q@EÆBÐ%KNVÐ RÐ6DKK
You can select whether to receive information on smooth traffic
flow.
K//$)&5$#"6)&(/&(#&<*0$%&*#&C$*%#
You can set the minimum time to be saved when having the
system suggest a detour route. If the estimated time saved by the
planned detour avoiding the traffic incidents is more than the set
time, the system suggests the new detour route. Otherwise, the
new route is not suggested.
"NMÆQLÐ#DSNTQRÐ,@MT@KKX
You can enable or disable the manual confirmation of every
recalculation.
U?)(9&;"'(#")V&%$##('1%
F'*4+$&:6#"G<*0('1
Refer to Setting the trip logger on page 23
<*0$&?)*3A&C"1
Refer to Setting the trip logger on page 23
UK'+('$&<$)0(3$%V&%$##('1%
You can use the “':BH:8()89JH48G” settings to enable or disable
connected online features.
Refer to Expanding the use of the navigation functions on
page 29
.MKHMDÐ3Q@EÆB
You can enable or disable the online traffic service.
K'+('$&W$*#2$)
You can enable or disable the online weather forecast service.
K'+('$&B*)A('1
You can enable or disable the online parking service.
K'+('$&P6$+&B)(3$%
You can enable or disable the online fuel price service.
K'+('$&<$*)32
You can enable or disable the online search service.
<$##('1&#2$&*+$)#&9"('#&
I*)'('1%
Important
The warning for road safety cameras (like speed cameras) is
disabled when you are in certain countries where warnings
for road safety cameras are prohibited. However, you are
fully responsible for ensuring that this feature is legal in the
country where you intend to use it.
You can set an alert for the different alert point categories,
individually.
1 Press the ,"1 button and touch .
2 Touch , and then touch [)8==H:DG].
!"#$%&'(')%"*
$61/-@717.?8930B030.4018-B8/<08.5>7?5/7-.
+O
3 Touch [F39:H:DG].
4 Touch ["B89=(1CH:=G].
5 Touch ["B89=(1CH:=(F39:H:DG] to turn it on.
6 Touch the item you want to set.
"B89=(&K;8G
Sets the type of alert point.
);88?(637893(&K;8G
Sets the type of speed camera.
p When you are driving in France, [);88?(637893(&K;8G] is
not available and [@3:D89C<G(_C:8(`S#"a] becomes avail-
able instead. If [@3:D89C<G(_C:8(`S#"a] is set to on, alert
points that you set are also alerted as dangerous zones. You
can also set the distance of the pre-alert zone in [198Z"B89=(
_C:8] and turn the sound alert on or off in [)C<:?(3B89=].
7 Touch any of the items to change the setting.
8 Touch [F39:H:D(&K;8] and then touch one of
the options.
The following alert types are available:
@HG3TB8?:
The system does not warn you of the alert points for this
category.
"<?HC(3:?(#HG<3B:
You will receive audible and visible warnings while you are
approaching the points in this category.
#HG<3B:
You will receive a visible warning while you are approaching
the points in this category.
p If you select “"<?HC(3:?(#HG<3B” in the warning type setting,
you can change the reception timing of the audio alert. If
you select “':BK(FE8:();88?H:D”, the audio alert is only
played when you exceed the given speed limit. If you select
“FE8:(";;9C34EH:D”, the audio alert is always played when
approaching one of these alert points. In order to draw your
attention, the alert is different when you exceed the speed
limit.
X$##('1&#2$&,*9&69>*#$
You can update existing content, purchase additional maps and
activate extra services on your product. To update the content,
download the update on your USB memory storage by using
the computer to which the Naviextras Toolbox is installed. Then,
transfer the data from connected USB memory storage to your
navigation system by using “)K:4&CCB” on this product.
p For details, access the following URL and refer to bS'F(&'(
U1@"&+Yc(%U$@+.
E==;[WW;HC:889R:3JH8I=93GR4C7
FZ9*'>('1&#2$&6%$&"/&#2$&'*0(G
1*#("'&/6'3#("'%
You can expand the use of the navigation functions to iPhone
or smartphones if you connect an iPhone or a smartphone
(Android) that has the "#$6)*!6(";; installed.
.$&%6)$&#"&)$*>&4$/")$&-"6&6%$&
:JD@<[!@&/6'3#("'
Important
Premium services for AVICSYNC require a paid
subscription in order to be used, and not all services are
available in all countries. Please refer to our website for
more details.
Please be aware that you may be charged additional
roaming charges by your cellular provider if you use
connected services while abroad.
If the Data Plan for your iPhone or smartphone (Android)
does not provide for unlimited data usage, additional
charges from your carrier may apply for accessing app-
based connected content via networks other than Wi-Fi.
The information which is sent by content provider, such
as search results, regulations, prices, etc. may not
necessarily correspond to the actual condition. Utilise
the information for your reference.
To ensure compatibility, always use the latest version of
the "#$6)*!6(";;.
If the downloaded data is large, it may take some time
for the data to be transferred to your in-car navigation
system via the "#$6)*!6(";;. In such cases, you can
also synchronize the content using Naviextras Toolbox
on your computer and the “)K:4&CCB” menu of the in-car
navigation instead.
Limitations:
Access to app-based connected content will depend on the
availability of cellular and/or Wi-Fi network coverage for
the purpose of allowing your smartphone to connect to the
Internet.
Service availability may be geographically limited to the
region. Consult the connected content service provider for
additional information.
Ability of this product to access connected content is
subject to change without notice and could be affected
by any of the following: compatibility issues with future
firmware versions of smartphone; compatibility issues with
future versions of the connected content application(s)
for the smartphone; changes to or discontinuation of the
connected Content application(s) or service by its provider.
Pioneer is not liable for any issues that may arise from
incorrect or flawed app-based content.
The content and functionality of the supported applications
are the responsibility of the App providers.
W2*#&(%&#2$&:JD@<[!@&:99\
The "#$6)*!6(";; is a dynamic companion app that you can
use to connect your iPhone or smartphone to a compatible
Pioneer navigation system.
Once linked, the navigation system communicates with your
iPhone or smartphone to share information such as contacts,
navigation history, planned routes, POI favourites, and even
where you parked your vehicle.
With the "#$6)*!6(";;, your navigation receiver can also
access Premium connected services such as real-time local
search and weather data lookup to ensure that you’ll have all the
information you need to reach your desired destination.
As new mapping data becomes available, you can use the
"#$6)*!6(";; to review, purchase, download, and transfer
updated mapping content directly to the compatible Pioneer
navigation system.
In addition to augmenting your Pioneer in-dash navigation
experience, "#$6)*!6(";; also works as a standalone naviga-
tion app. This means that you’ll always have access to Pioneer’s
accurate turn-by-turn navigation, even when you’re not in your
vehicle.
Access our website to check further details for the "#$6)*!6(
";;.
E==;[WWOOOR;HC:889R8<W3JH4GK:4
p To use the "#$6)*!6(";; as a standalone navigation app, a
periodical connection between your in-car navigation sys-
tem and an iPhone or a smartphone (Android) that has the
"#$6)*!6(";; installed is required.
@",9*#(4(+(#-&*'>&3"''$3#(0(#-
You need to install the free "#$6)*!6(";; to your iPhone or
smartphone (Android). To use the "#$6)*!6(";; function,
both iPhone or smartphone (Android) compatibility with the
"#$6)*!6(";; and connectivity with the navigation system are
required.
!"#$%&'(')%"*
$61/-@717.?8930B030.4018-B8/<08.5>7?5/7-.
SZ
:JD@<[!@&3",9*#(4(+(#-
"#$6)*!6 is available for the following models.
p Depending on the software version of the iPhone and
Android, it may not be compatible with this product. For
latest compatibility with this product and "#$6)*!6(";;,
refer to the information on our website.
(B2"'$&,">$+%
iPhone 6 Plus: iOS 8.x
iPhone 6: iOS 8.x
iPhone 5s: iOS 7.x, 8.x
iPhone 5c: iOS 7.x, 8.x
iPhone 5: iOS 7.x, 8.x
iPhone 4s: iOS 7.x, 8.x
iPhone 4: iOS 6.x
<,*)#92"'$&S:'>)"(>T&,">$+%
SAMSUNG
Galaxy Grand Prime: Android 4.4.4
Galaxy S2: Android 4.1.2
Galaxy S3: Android 4.1.2, 4.3
Galaxy S4: Android 4.2.2, 4.4.2
Galaxy S5: Android 4.0.3
Galaxy S6: Android 5.0.2
Galaxy Note #: Android 4.1.1
Galaxy Note $: Android 4.4.2
Galaxy Tab 2: Android 4.0.3
Galaxy Tab 3: Android 4.2.2
LG
Nexus 5: Android 4.4.2, 4.4.4, 5.0
ASUS
Nexus 7 (2013): Android 4.3
Motorola
Moto G: Android 4.4.4
B)$9*)*#("'%&4$/")$&6%('1&#2$&
:JD@<[!@&/6'3#("'
1 Download the "#$6)*!6(";; from the
App Store or Google Play and install the app to
your iPhone or smartphone (Android).
To find "#$6)*!6(";;, access the App Store or Google Play
and enter “"#$6)*!6” in the search box.
2 Start the "#$6)*!6(";; on your iPhone or
smartphone (Android).
3 Connect your iPhone or smartphone (Android)
to the navigation system via Bluetooth or USB
cable connection.
For details of the Bluetooth connection, refer to Bluetooth®
connection on page 30.
For details of the USB connections, refer to the Installation
Manual.
4 Press the ,"1 button and touch .
5 Touch on the navigation menu.
6 Touch ["GGC4H3=8(!8O(1EC:8].
7 Touch the iPhone or smartphone (Android) that
you want to associate with the navigation sys-
tem and then touch ["GGC4H3=8].
8 Accept the association on your iPhone or
smartphone (Android).
Once the association is established, your iPhone or smartphone
(Android) is automatically associated when you connect your
iPhone or smartphone (Android) to the navigation system.
9 Purchase connected services via the "#$6)*!6(
";;.
10 Display the navigation menu and then touch
[)8==H:DG].
11 Touch [':BH:8()89JH48G].
12 Touch the service that you want to activate.
The menus for the connected service are activated.
For details on the operations and features of the "#$6)*!6,
refer to the manual on our website.
5(%9+*-('1&#2$&U.+6$#""#2V&
%3)$$'
1 Press the button.
2 Touch , and then .
8$1(%#$)('1&-"6)&.+6$#""#2&
>$0(3$%
1 Activate the Bluetooth wireless technology on
your devices.
2 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
3 Touch [6C::84=HC:].
4 Touch .
The system searches for Bluetooth devices waiting for a connec-
tion and displays them in the list if a device is found.
5 Touch the Bluetooth device name.
After the device is successfully registered, a Bluetooth connec-
tion is established by the system. Once the connection is estab-
lished, the device name is displayed on the list.
p If three devices are already paired, “,87C9K(L<BB” is dis-
played. Delete a paired device first.
Refer to Deleting a registered device on page 31
p If your device supports SSP (Secure Simple Pairing), a six-
digit number appears on the display of this product. Touch
[*8G] to pair the device.
p If a PIN code input is required, enter a PIN code. (The default
PIN code is “0000”.)
Refer to Entering the PIN code for Bluetooth wireless
connection on page 31
p The Bluetooth connection can be also made by detecting
this product from the Bluetooth device. Before registration,
make sure that “#HGHTHBH=K” in the “2B<8=CC=E” menu is set
to “':”. For details on a Bluetooth device operations, refer
to the operating instructions supplied with the Bluetooth
device.
Refer to Switching visibility on page 31
)G60/--/<®84-..04/7-.
!"#$%&'(')%"*
$61/-@717.?8930B030.4018-B8/<08
.5>7?5/7-.
)G60/--/<®8
4-..04/7-.
S(
<$##('1&.+6$#""#2&>$0(3$&*6#"&
3"''$3#("'
This function connects the last connected Bluetooth device to
this product with the Hands-Free Profile automatically as soon
as the devices is less than a few metres apart.
The default setting is “':”.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch ["<=C(6C::84=] to switch “':” or “'QQ”.
5$+$#('1&*&)$1(%#$)$>&>$0(3$
CAUTION
Never turn this product off while the paired Bluetooth device
is being deleted.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [6C::84=HC:].
3 Touch .
4 Touch [*8G].
@"''$3#('1&*&)$1(%#$)$>&
.+6$#""#2&>$0(3$&,*'6*++-
Connect the Bluetooth device manually in the following cases:
Two or more Bluetooth devices are registered, and you want
to manually select the device to be used.
You want to reconnect a disconnected Bluetooth device.
Connection cannot be established automatically for some
reason.
1 Activate the Bluetooth wireless technology on
your devices.
2 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
3 Touch [6C::84=HC:].
4 Touch the name of the device.
p To disconnect the device, touch the name of the connected
device in the list.
<I(#32('1&0(%(4(+(#-
This function sets whether or not to make this product visible to
the other device.
The default setting is “':”.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [#HGHTHBH=K] to switch “':” or “'QQ”.
F'#$)('1&#2$&BD!&3">$&/")&
.+6$#""#2&I()$+$%%&3"''$3#("'
To connect your Bluetooth device to this product, you need to
enter a PIN code.
The default PIN code is “0000”.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [1$!(6C?8($:;<=].
3 Touch [0] to [9] to input the pin code (up to 8
digits).
4 Touch .
5(%9+*-('1&#2$&>$0(3$&
('/"),*#("'
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [@8JH48($:QC973=HC:].
The device name and address of the Bluetooth device on this
product are displayed.
@+$*)('1&#2$&.+6$#""#2&,$,")-
CAUTION
Never turn this product off while the Bluetooth memory is
being cleared.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [2B<8=CC=E(,87C9K(6B839].
3 Touch [6B839].
4 Touch ['A].
=9>*#('1&.+6$#""#2&%"/#I*)$
This function is used to update this product with the latest
Bluetooth software. For details on Bluetooth software and updat-
ing, refer to our website.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
p You need to store the version update file to the USB storage
device in advance.
CAUTION
Never turn this product off and never disconnect the phone
while the software is being updated.
1 Connect the USB storage device stored the
version update file to this product.
Refer to Plugging and unplugging a USB storage device on
page 6
2 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
3 Touch [2&()CQ=O398(U;?3=8].
4 Touch [)=39=].
Follow the on-screen instructions to finish updating the
Bluetooth software.
5(%9+*-('1&#2$&.+6$#""#2&%"/#G
I*)$&0$)%("'
If this product fails to operate properly, you may need to consult
your dealer for repair.
In such cases, perform the following procedure to check the
software version on this product.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [2B<8=CC=E(#89GHC:($:QC973=HC:].
The version of this product’s Bluetooth module appears.
!"#$%&'(')%"*
)G60/--/<®84-..04/7-.
S+
*2
*3
*1
*4
*5
*6
*1
Switches to the preset dial screen.
Refer to Using the preset dial lists on page 32
*2
Switches to the phone book list.
Refer to Calling a number in the phone book on
page 32
*3
Switches to the missed, received and dialled call
lists.
Refer to Dialling from the history on page 32
*4
Switches the mode to enter the phone number
directly.
Refer to Direct dialling on page 32
*5
Switches to the voice recognition function.
Refer to Using the voice recognition function on
page 33
*6
The following items are displayed.
Name of the current mobile phone
List number of the current mobile phone
Indicates that a Bluetooth telephone is
connected.
Reception status of the current mobile phone
Battery status of the current mobile phone
To use this function you need to connect your cellular phone to
this product via Bluetooth in advance.
Refer to Bluetooth® connection on page 30
p When the system language is set to Russian, ABC appears. If
you want to change the character, touch the key repeatedly
until the desired character appears.
CAUTION
For your safety, avoid talking on the phone as much as
possible while driving.
5(%9+*-('1&#2$&92"'$&,$'6&
%3)$$'
1 Press the button.
2 Touch .
;*A('1&*&92"'$&3*++
You can make a phone call in many different ways.
p To end the call, touch .
5()$3#&>(*++('1
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch .
3 Touch the number keys to enter the phone
number.
4 Touch to make a call.
The dial screen appears and dialling starts.
@*++('1&*&'6,4$)&('&#2$&92"'$&4""A
p The contacts on your phone will be automatically transferred
to this product when the phone is connected.
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch .
3 Touch the desired name on the list.
4 Touch the phone number.
The dial screen appears and dialling starts.
5(*++('1&/)",&#2$&2(%#")-
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch .
3 Touch the item to switch the history list.
The following items are available:
: Received call list
: Dialled call list
: Missed call list
4 Touch the desired entry on the list to make a
call.
The dial screen appears and dialling starts.
=%('1&#2$&9)$%$#&>(*+&+(%#%
8$1(%#$)('1&*&92"'$&'6,4$)
You can easily store up to six phone numbers per device as
presets.
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch or .
p On the “1EC:8(2CC5” screen, touch the desired name to
display the contact’s phone number.
3 Touch .
5(*++('1&/)",&#2$&9)$%$#&>(*+&+(%#
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch .
3 Touch the desired entry on the list to make a
call.
The dial screen appears and dialling starts.
5$+$#('1&*&92"'$&'6,4$)
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch .
3 Touch .
4 Touch [*8G].
8$3$(0('1&*&92"'$&3*++
p To end the call, touch .
1 Touch to answer the call.
If you touch while getting a call waiting, you
can switch to the talking person.
Touch to reject the call.
:5.C1%B30089<-.7.?
!"#$%&'(')%"*
:5.C1%B30089<-.7.?
SS
,HMHLHRHMFÐSGDÐCH@KÐBNMÆQL@G
#("'&%3)$$'
p The dial confirmation screen cannot be minimised on the AV
operation screen.
p AV sources cannot be selected even if the dial confirmation
screen is minimised while talking on the phone or receiving
an incoming call.
1 Touch .
Touch to display the dial confirmation screen
again.
@2*'1('1&#2$&92"'$&%$##('1%
<$##('1&*6#"&*'%I$)('1
You can select whether or not to answer a call automatically.
The default setting is “'QQ”.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch ["<=C(":GO89] to switch “':” or “'QQ”.
<I(#32('1&#2$&)('1&#"'$
You can select whether or not to use this product’s ring tone.
The default setting is “':”.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [-H:D(&C:8] to switch “':” or “'QQ”.
D'0$)#('1&'*,$%&('&#2$&92"'$&4""A
You can use this function to change the order of the first and last
names in the phone book.
1 Display the “2B<8=CC=E” screen.
Refer to Displaying the “2B<8=CC=E” screen on page 30
2 Touch [$:J89=(!378].
3 Touch [*8G].
<$##('1&#2$&9)(0*#$&,">$
During a conversation, you can switch to private mode (talk
directly on your mobile phone).
1 Touch or to turn private mode on or
off.
:>76%#('1&#2$&"#2$)&9*)#-]%&+(%#$'('1&
0"+6,$
This product can be adjusted to the other party’s listening
volume.
p Settings can be stored for each device.
1 Touch to switch between the three vol-
ume levels.
=%('1&#2$&0"(3$&)$3"1'(#("'&
/6'3#("'
You can use the voice recognition function of iPhone or
smartphone.
p When an iPhone running iOS 6.1 or higher is used, Siri Eyes
Free Mode is available with this product.
p For using this function with a smartphone, the device must
be compatible with ":?9CH?("<=C. For using the voice
recognition function with a smartphone, launch ":?9CH?(
"<=C beforehand.
Refer to Using ":?9CH?("<=C on page 51
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 32
2 Touch .
The voice recognition function launches and the voice control
screen appears.
p You can also launch the voice recognition function by press-
ing and holding the button.
!"#$%&/")&2*'>%G/)$$&92"'('1
General notes
Connection to all mobile phones featuring Bluetooth wire-
less technology is not guaranteed.
The line-of-sight distance between this product and your
mobile phone must be 10 metres or less when sending and
receiving voice and data via Bluetooth technology.
However, the actual transmission distance may be shorter than
the estimated distance, depending on the usage environment.
With some mobile phones, the ring sound may not be output
from the speakers.
If private mode is selected on the mobile phone, hands-free
phoning may be disabled.
Registration and connection
Mobile phone operations vary depending on the type of
mobile phone. Refer to the instruction manual that came
with your mobile phone for detailed instructions.
When phone book transfer does not work, disconnect your phone
and then perform pairing again from your phone to this product.
Making and receiving calls
You may hear a noise in the following situations:
— When you answer the phone using the button on the
phone.
— When the person on the other end of the line hangs up the
phone.
If the person on the other end of the line cannot hear the
conversation due to an echo, decrease the volume level for
hands-free phoning.
With some mobile phones, even after you press the accept
button on the mobile phone when a call comes in, hands-
free phoning may not be performed.
The registered name will appear if the phone number is
already registered in the phone book. When the same phone
number is registered under different names, only the phone
number will be displayed.
The received call and the dialled number histories
You cannot make a call to the entry of an unknown user (no
phone number) in the received call history.
If calls are made by operating your mobile phone, no history
data will be recorded in this product.
Phone book transfers
If there are more than 800 phone book entries on your mobile
phone, not all entries may download completely.
Depending on the phone, this product may not display the
phone book correctly.
If the phone book in the phone contains image data, the
phone book may not be transferred correctly.
!"#$%&'(')%"*
:5.C1%B30089<-.7.?
S&
Depending on the mobile phone, phone book transfer may
not be available.
When using an iPod / iPhone or a smartphone with this product,
configure the settings of this product according to the device
to be connected.
This section describes the settings required for each device.
3GDÐA@RHBÐÇNVÐNEÐH/NCÐÐH/GNMDÐ
")&%,*)#92"'$&%$#69
1 Select the method for connecting your device.
Refer to Setting the device connection method on page 34
2 Connect your device to this product.
Refer to the Installation Manual.
3 If necessary, connect your device to this product via
Bluetooth connection.
Refer to Bluetooth® connection on page 30
<$##('1&#2$&>$0(3$&3"''$3#("'&
,$#2">
To use the iPhone or smartphone on this product, select the
method for connecting your device.
Settings are required according to the connected device.
1 Display the “)KG=87” setting screen.
2 Touch [$:;<=W'<=;<=()8==H:DG].
3 Touch [)739=;EC:8()8=<;].
4 Configure the following settings.
@8JH48: Select the device to be connected.
6C::84=HC: : Select the connection method.
Refer to Information on the connections and functions for
each device on page 35
p The setting will change after the following processes are
automatically executed.
— The source is turned off.
— ";;-3?HC(,C?8 is exited.
— The smartphone connection (USB and Bluetooth) is
disconnected.
p The setting may not be operable right after it is changed.
(B">&E&(B2"'$&3",9*#(4(+(#-
This product supports only the following iPod / iPhone models
and iPod / iPhone software versions. Others may not work
correctly.
iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus: iOS 7.0 or later.
iPhone 3GS: iOS 6.0.1
iPod touch (4th, 5th generation): iOS 6.0.1
iPod touch (3rd generation): iOS 5.1.1
iPod touch (2nd generation): iOS 4.2.1
iPod classic 160GB (2009): Ver. 2.0.4
iPod classic 160GB (2008): Ver. 2.0.1
iPod classic 80GB: Ver. 1.1.2
iPod nano (7th generation)
iPod nano (6th generation): Ver. 1.2
iPod nano (5th generation): Ver. 1.0.2
iPod nano (4th generation): Ver. 1.0.4
iPod nano (3rd generation): Ver. 1.1.3
p You can connect and control an iPod / iPhone compatible
with this product by using separately sold connector cables.
p Operation methods may vary depending on the iPod / iPhone
model and the software version.
p Depending on the software version of the iPod / iPhone, it
may not be compatible with this product.
For details about iPod / iPhone compatibility with this prod-
uct, refer to the information on our website.
This manual applies to the following iPod / iPhone models.
iPod / iPhone with a 30-pin connector
iPhone 3GS, 4, 4s
iPod touch 2nd, 3rd, 4th generation
iPod classic 80GB, 160GB
iPod nano 3rd, 4th, 5th, 6th generation
iPod / iPhone with a Lightning connector
iPhone 6, 6 Plus
iPhone 5, 5c, 5s
iPod touch 5th generation
iPod nano 7th generation
:'>)"(>™&>$0(3$&3",9*#(4(+(#-
p Operation methods may vary depending on the Android
device and the software version of the Android OS.
p Depending on the version of the Android OS, it may not be
compatible with this product.
p Compatibility with all Android devices is not guaranteed.
For details about Android device compatibility with this
product, refer to the information on our website.
A0/698B-3872-C8I872<-.08-381@53/9<-.0
!"#$%&'(')%"*
A0/698B-3872-C8I872<-.08-381@53/9<-.0
SD
D'/"),*#("'&"'&#2$&3"''$3#("'%&*'>&/6'3#("'%&/")&$*32&>$0(3$
The settings and cables required for connecting each device, and the available sources are as follows.
iPod / iPhone with a 30-pin connector
Device connection method When connecting via Bluetooth When connecting via CD-IU201V (sold
separately)
When connecting via CD-IU201S (sold
separately)
)739=;EC:8()8=<; @8JH48 H1EC:8WH1C? H1EC:8WH1C? H1EC:8WH1C?
6C::84=HC: 2B<8=CC=E U)2d U)2d
Bluetooth connection Bluetooth connection is required. — —
Connection requirement —Connect to USB port 1 for using "#$6)*!6(
";;.
Connect to USB port 1 for using ";;-3?HC(
,C?8 or "#$6)*!6(";;.
Available sources H1C? (audio) — 
H1C? (video) — 
";;-3?HC(,C?8 ——
"#$6)*!6(";; 
iPod / iPhone with a Lightning connector
Device connection method When connecting via Bluetooth When connecting via CD-IU52 (sold
separately)
LMM@"2
When connecting via the following
cables:
CD-IH202 (sold separately)
CD-IU52 (sold separately)
Lightning Digital AV Adapter (sold
separately)
LMN@"2/LPMN@"2/LPMN2&/
LPMMN@"2/LPMMN2&
When connecting via the following
cables:
CD-IV202AV (sold separately)
CD-IU52 (sold separately)
Lightning to VGA Adapter (sold
separately)
)739=;EC:8()8=<; @8JH48 H1EC:8WH1C? H1EC:8WH1C? H1EC:8WH1C? H1EC:8WH1C?
6C::84=HC: 2B<8=CC=E U)2d @HDH=3B("#(3?3;=89 #%"(3?3;=89
";;B8(6391B3K —': (*2)/'QQ — —
Bluetooth connection Bluetooth connection is required. —Bluetooth connection is required. Bluetooth connection is required.
Connection requirement — Connect to USB port 1 for using
";;B8(6391B3K or "#$6)*!6(";;.
— —
Available sources H1C? (audio) —— (*1) — (*1)
H1C? (video) ——— (*1) — (*1)
";;-3?HC(,C?8 —— 
";;B8(6391B3K — (*3) — —
"#$6)*!6(";; 
(*1) Use AppRadio Mode to play music or videos on an iPod / iPhone. For using ";;-3?HC(,C?8, install the 639,8?H31B3K89 app on your iPod / iPhone.
For details about the 639,8?H31B3K89, refer to the information on our website.
Refer to the 639,8?H31B3K89 manual for more information.
(*2) Select “':” for “";;B8(6391B3K” for using Apple CarPlay.
(*3) Available only when an ";;B8(6391B3K-compatible device is connected.
!"#$%&'(')%"*
A0/698B-3872-C8I872<-.08-381@53/9<-.0
SV
Android device
Device connection method When connecting via Bluetooth LMM@"2/LMN@"2
When connecting via CD-MU200 (sold
separately)
LMM@"2
When connecting via CD-AH200 (sold
separately)
)739=;EC:8()8=<; @8JH48 '=E89G '=E89G '=E89G
6C::84=HC: 2B<8=CC=E / — (*5) U)2> S@,$
":?9CH?("<=C —': (*1)/'QQ —
Bluetooth connection Bluetooth connection is required. Bluetooth connection is required for using
":?9CH?("<=C.
Bluetooth connection is required.
Connection requirement —Connect to USB port 2 for using ":?9CH?(
"<=C or "#$6)*!6(";;.
—
Available sources ";;-3?HC(,C?8 ——
":?9CH?("<=C — (*2)(*3) —
"#$6)*!6(";; (*4) (*4) (*4)
(*1) Select “':” for “":?9CH?("<=C” for using Android Auto.
(*2) Available only when an ":?9CH?("<=C-compatible device is connected.
(*3) The "#$6)*!6(";; function automatically turns off when an ":?9CH?("<=C-compatible device is connected with this product for the first time. From the next time a compatible device is connected,
":?9CH?("<=C cannot be used while the "#$6)*!6(";; function is on.
(*4) Turn on the "#$6)*!6(";; function for using "#$6)*!6(";;.
(*5) LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
!"#$%&'(')%"*
A0/698B-3872-C8I872<-.08-381@53/9<-.0
SJ
iTunes® tagging indicator and
iTunes® tagging song status indicator
Selects the FM1, FM2, FM3,
MW or LW band.
Performs manual tuning.
Performs seek tuning or
non stop seek tuning.
Releasing the key in a few seconds,
skips to the nearest station from
the current frequency.
Keeping holding the key for a long
seconds, performs non stop seek
tuning.
Displays the preset channel list.
Select an item on the list ("1" to "6") to
switch to the preset channel.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
frequency to a key.
HOLD
HOLD
Stores song information to an iPod.
Refer to Storing song information to an iPod
(iTunes® Tagging) on page 70
p By pressing the or button, you can also switch
the preset channels.
p By pressing and holding the or button and
release, you can also perform seek tuning.
<#*)#('1&9)"3$>6)$
1 Display the AV source selection screen.
2 Touch [-3?HC].
<#")('1&#2$&%#)"'1$%#&4)"*>3*%#&
/)$Q6$'3($%
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys “d” to “e”.
p Storing broadcast frequencies with BSM may replace those
you have already saved.
p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch the preset channel list display key.
2 Touch to begin a search.
The six strongest broadcast frequencies will be stored under the
preset tuning keys in the order of their signal strength.
Touch [63:48B] to cancel the storage process.
5(%9+*-('1&#2$&U8*>("&%$##('1%V&
%3)$$'
1 Display the “)KG=87” setting screen.
2 Touch ["#()C<948()8==H:DG].
3 Touch [-3?HC()8==H:DG].
?6'('1&('#"&%#)"'1&/)$Q6$'3($%
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
The default setting is “'QQ”.
p This setting is available only when “-3?HC” is selected as the
source.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch [.C43B].
3 Touch the item.
'QQ:
Turns the seek tuning setting off.
.8J8Bd to .8J8Bf:
Sets the level of sensitivity for FM to .8J8Bd to .8J8Bf (for
MW and LW to .8J8Bd or .8J8B>).
p The FM “.8J8Bf” (MW and LW “.8J8B>”) setting allows you
to receive the only stations with the strongest signals.
<$##('1&#2$&P;&#6'('1&%#$9
You can switch the seek tuning step for the FM band.
The default setting is “J'Y”.
p This setting is available when the source is turned off.
p The tuning step remains at “J'Y” during manual tuning.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch [L,()=8;] to switch the step to “J'Y”
or “J'Y”.
F5C7-
!"#$%&'(')%"*
F5C7-
S'
<I(#32('1&#2$&%"6'>&Q6*+(#-&"/&#2$&
P;&#6'$)
The default setting is “)=3:?39?”.
p This function is available only when you receive the FM band.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch [&<:89()C<:?].
3 Touch the item.
,<GH4:
Gives priority to the sound quality.
&3B 5 :
Gives priority to noise prevention.
)=3:?39?:
Gives no effect.
<$##('1&#2$&*+#$)'*#(0$&/)$Q6$'3-&
%$*)32
When the tuner cannot get a good reception, tunes to another
broadcast station that supports the same programme in the
current network.
The default setting is “':”.
p This function is available only when you receive the FM band.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch ["B=89:3=HJ8(L-+g] to switch “':” or
“'QQ”.
<$##('1&#2$&:6#"&BD&%$*)32
When you switch to the broadcast station containing RDS data,
searches for the same PI (Program Identification) code broad-
cast station from all frequency band automatically.
The default setting is “'QQ”.
p This setting is available when the source is turned off.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch ["<=C(1$] to switch “':” or “'QQ”.
C(,(#('1&%#*#("'%&#"&)$1("'*+&
9)"1)*,('1
You can switch whether the area code is checked during the
Auto PI search.
The default setting is “':”.
p This function is available only when you receive the FM band.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch [-8DHC:3B] to switch “':” or “'QQ”.
1DBDHUHMFÐSQ@EÆBÐ@MMNTMBDLDMSRÐ3 
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
p This function is available only when you receive the FM band.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch [&"($:=899<;=] repeatedly until the
desired setting appears.
F88DAB
F80DAB
F980DAB
F9880DAB
&"('LL (default)
@"2/-@)(&"
-@)(&"('!.*
p The selected setting also applies to “&"($:=899<;=” under
“@"2()8==H:DG”.
F980BT
F9880BT
'QQ (default)
':
8$3$(0('1&'$I%&*''"6'3$,$'#%
The news can be received from the last selected frequency,
interrupting the other sources.
The default setting is “'QQ”.
p This function is available only when you receive the FM band.
1 Display the “-3?HC()8==H:DG” screen.
Refer to Displaying the “Radio settings” screen on page 37
2 Touch [!8OG($:=899<;=] to switch “':” or “'QQ”.
F88DAB
F80DAB
F980DAB
F9880DAB
Selects the DAB1, DAB2, or
DAB3 band.
Performs manual tuning.
Performs seek tuning.
Skips to the nearest ensemble.
When there are multiple services in the
same frequency, switches the services one
by one.
Displays the preset channel list.
Select an item on the list to switch to the
preset service.
Recalls the preset service
component stored to a key from
memory.
Stores the current service
component to a key.
HOLD
HOLD
*1
*2
(7?7/5G8F5C7-
!"#$%&'(')%"*
F5C7- (7?7/5G8F5C7-
SO
*1
Displays the service list screen.
Refer to Selecting a service component on page
39
*2
Switches to time shift mode.
Refer to Listening to a recent broadcast (time shift
mode) on page 39
p By pressing the or button, you can also switch
the preset service components.
p By pressing and holding the or button and
release, you can also perform seek tuning.
5(1(#*+&8*>("&#6'$)&"9$)*#("'%
For improved Digital Radio reception, make sure a Digital Radio
aerial with phantom power input (active type) is used. Pioneer
recommends using AN-DAB1 (sold separately) or CA-AN-
DAB.001 (sold separately).
Current consumption of Digital Radio aerial should be 100 mA
or less.
For details on how to connect a Digital Radio aerial, refer to
the installation manual.
Digital Radio (DAB) features the following:
High sound quality (nearly as high as for CDs, although it
may be reduced in some cases in order to allow more ser-
vices to be broadcast)
Interference-free reception
;P!&%699")#
When some ensembles support the same service compo-
nent, switches to another ensemble that has better reception
automatically.
<#*)#('1&9)"3$>6)$
1 Display the AV source selection screen.
2 Touch [@HDH=3B(-3?HC].
C(%#$'('1&#"&*&)$3$'#&4)"*>3*%#&
S#(,$&%2(/#&,">$T
This product stores recent broadcasts to memory automatically.
You can pause or listen to the stored broadcasts again by using
this function (time shift mode).
1 Touch .
Touch to resume the live broadcast.
p Stored broadcast is overwritten by the latest broadcast.
p If the duration that a selection is paused exceeds the length
of the memory capacity, playback will resume from the
beginning of the selection in memory.
<$+$3#('1&*&%$)0(3$&3",9"'$'#
You can select a service component.
p When you start to use this source, service list information is
automatically updated.
p When there is any change in the current ensemble, service
list information is automatically updated.
1 Touch .
2 Touch the category.
)89JH48:
Displays all service components.
19CD937(&K;8:
Searches from programme type information.
+:G87TB8:
Displays the ensemble list.
3 Touch the item.
If you touch [U;?3=8()=3=HC:G], you can update
the channel list.
5(%9+*-('1&#2$&U5:.&%$##('1%V&
%3)$$'
1 Display the “)KG=87” setting screen.
2 Touch ["#()C<948()8==H:DG].
3 Touch [@"2()8==H:DG].
<$##('1&#2$&5(1(#*+&8*>("&*$)(*+&
9"I$)&%699+-
This function allows you to select whether to output power to a
connected Digital Radio aerial.
The default setting is “':”.
p This setting is available when the source is turned off.
1 Display the “@"2()8==H:DG” screen.
Refer to Displaying the “DAB settings” screen on page 39
2 Touch [":=8::3(1CO89] to switch “':” or
“'QQ”.
<$##('1&#2$&%$)0(3$&/"++"I
The default setting is “':”.
p This setting is available only when “@HDH=3B(-3?HC” is
selected as the source.
p Depending on the model used, this menu may not be
displayed.
H:85&CD!^
When the tuner cannot get good reception, tunes to another
ensemble that supports the same service component.
If no alternative service component can be found or reception
remains poor, this function will automatically switch to an
identical FM broadcast.
<KP?&CD!^
When HARD LINK is unsuccessful, tunes to another ensemble
that supports the similar service component.
If no alternative service component can be found or reception
remains poor, this function will automatically switch to a similar
FM broadcast.
p SOFT LINK function is available when “)CQ=(.H:5” is “':”.
Refer to Setting the Soft link on page 40
p Only available in areas where SOFT LINK function is
supported.
p The broadcast content of the switched channel may differ
from the content of the original channel.
1 Display the “@"2()8==H:DG” screen.
Refer to Displaying the “DAB settings” screen on page 39
2 Touch [)89JH48(LCBBCO] to switch “':” or “'QQ”.
!"#$%&'(')%"*
(7?7/5G8F5C7-
&Z
<$##('1&#2$&<"/#&+('A
The default setting is “'QQ”.
p This setting is available only when “)89JH48(LCBBCO” is set to
“':”.
Refer to Setting the service follow on page 39
p Depending on the model used, this menu may not be
displayed.
1 Display the “@"2()8==H:DG” screen.
Refer to Displaying the “DAB settings” screen on page 39
2 Touch [)CQ=(.H:5] to switch “':” or “'QQ”.
1DBDHUHMFÐSQ@EÆBÐ@MMNTMBDLDMSRÐ3 
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
The default setting is “&"('LL”.
p This setting is available only when “@HDH=3B(-3?HC” is
selected as the source.
p Depending on the model used, this menu may not be
displayed.
1 Display the “@"2()8==H:DG” screen.
Refer to Displaying the “DAB settings” screen on page 39
2 Touch [&"($:=899<;=].
3 Touch the item.
&"('LL
@"2/-@)(&"
-@)(&"('!.*
p The selected setting also applies to “&"($:=899<;=” under
“-3?HC()8==H:DG”.
*1
Skips files forward
or backward.
Switches between playback
and pause.
*2
Audio source screen 1
Audio source screen 2
Plays tracks in random order.
: Does not play tracks in random order.
: Plays all tracks in random order.
Sets a repeat play range.
: Repeats the current disc.
: Repeats the current track.
This function is available for music CD.
(714
!"#$%&'(')%"*
(7?7/5G8F5C7- (714
&(
Video source screen 1
*5
Performs fast reverse or
fast forward.
Touch again to change play back the
speed.
Stops playback.
*4
*3
Performs frame-by-frame playback.
HOLD Performs slow-motion playback.
Each time you touch it changes the
speed in four steps in the following order:
1/16 →1/8 → 1/4 → 1/2
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
Video source screen 2
Selects the audio output from
[L+R], [Left], [Right], [Mix].
This function is available for Video-CDs and
DVDs recorded with LPCM audio.
Changes the viewing
angle (Multi-angle).
This function is available for DVDs
featuring multi-angle recordings.
Sets a repeat play range.
: Repeats all files.
: Repeats the current chapter.
: Repeats the current title.
Resumes playback (Bookmark).
This function is available for DVD-Video.
You can memorise one point as a Bookmark
for a disc (up to five discs).
To clear the bookmark on the disc, touch
and hold this key.
Returns and begins playback from
the specified point.
This function is available for DVD-Video and
Video-CDs featuring PBC (playback control).
*6
Video source screen 2
*1
Selects a track from the list.
Refer to Selecting files from the track name list on
page 42
*2
Switches the media file type.
Refer to Switching the media file type on page
42
*3
Searches for the part you want to play.
Refer to Searching for the part you want to play on
page 42
*4
Displays the DVD menu.
Refer to Operating the DVD menu on page 42
!"#$%&'(')%"*
(714
&+
*5
Switches the subtitle/audio language.
Refer to Switching the subtitle/audio language on
page 42
*6
Displays the DVD menu keypad.
Refer to Operating the DVD menu using touch
panel keys on page 42
p By pressing the or button, you can also skip files/
chapters forwards or backwards.
p By pressing and holding the or button, you can
also perform fast reverse or fast forwards.
p If a Video-CD with PBC On is being played, appears.
p You can set the screen size for the video image.
Refer to Changing the wide screen mode on page 69
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
<#*)#('1&9)"3$>6)$
You can play a normal music CD, Video-CD or DVD-Video using
the built-in drive of this product.
1 Insert the disc.
Refer to Inserting and ejecting a disc on page 6
The source changes and then playback will start.
p If the disc is already set, select [@HG4] as the playing source.
2DKDBSHMFÐÆKDRÐEQNLÐSGDÐSQ@BJÐ
'*,$&+(%#
1 Touch .
2 Touch a track on the list to play back.
2VHSBGHMFÐSGDÐLDCH@ÐÆKDÐSXOD
When playing a digital media containing a mixture of various
media file types you can switch between media file types to play.
1 Touch .
2 Touch the item.
,<GH4:
Switches the media file type to music (compressed audio).
#H?8C:
Switches the media file type to video.
6@Z@":
Switches the media file type to CD (audio data (CD-DA)).
<$*)32('1&/")&#2$&9*)#&-"6&
I*'#&#"&9+*-
p For DVD-Videos, you can select [&H=B8], [6E3;=89] or [dNA8K].
p For Video-CDs, you can select [&93 45] or [dNA8K] (PBC only).
1 Touch .
2 Touch [&H=B8], [6E3;=89], [dNA8K], or [&9345].
3 Touch [0] to [9] to input the desired number.
4 Touch to start playback from the number
you registered.
K9$)*#('1&#2$&5J5&,$'6
You can operate the DVD menu by touching the menu item on
the screen directly.
p This function may not work properly with some DVD disc
content. In that case, use touch panel keys to operate the
DVD menu.
1 Touch or .
2 Touch the menu item.
<I(#32('1&#2$&%64#(#+$E*6>("&
+*'16*1$
1 Touch or .
: Changes the subtitle language.
: Changes the audio language.
p You can specify the desired language as the default subtitle/
audio languages.
Refer to Setting the top-priority languages on page 67
K9$)*#('1&#2$&5J5&,$'6&6%('1&
#"632&9*'$+&A$-%
If items on the DVD menu appear, the touch panel keys may
overlay them. If so, select an item using those touch panel keys.
1 Touch .
2 Touch , , or to select the menu
item.
3 Touch .
p The way to display the menu differs depending on the disc.
If you touch , the touch panel keys disappear
and the icon is displayed.
!"#$%&'(')%"*
(714
&S
*3
Skips files forward
or backward.
Switches between playback
and pause.
*4
Audio source screen 1 (Example: USB)
*1
*2
Switches the current music
information display.
Plays files in random order.
: Does not play files in random order.
: Plays all files within the repeat range in
random order.
Sets a repeat play range.
Selects the previous folder
or the next folder.
Audio source screen 2 (Example: USB)
or : Repeats all files.
: Repeats the current folder.
or : Repeats the current file.
*5
Stops playback.
*3
Performs frame-by-frame playback.
Performs slow-motion playback.
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
Sets a repeat play range.
: Repeats the current file.
: Repeats the current folder.
or : Repeats all files.
Video source screen (Example: Disc)
HOLD
This function is available only for compressed
video files stored on a disc.
&RPSUHVVHG¿OHV
!"#$%&'(')%"*
&RPSUHVVHG¿OHV
&&
Touch again to change the
playback speed.
Performs fast reverse or
fast forward.
*4
Switches between
playback and pause.
Video source screen (Example: Disc)
Still image screen
*3
Sets a repeat play range.
: Repeats all files.
: Repeats the current folder.
Plays files in random order.
: Does not play files in random order.
: Plays all files in the current repeat play
range in random order.
Selects the previous
or next folder.
Rotates the displayed
picture 90° clockwise.
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
Still image screen
Touch again to change the
playback speed.
Performs fast reverse or
fast forward.
*4
Switches between
playback and pause.
*1
Displays the MIXTRAX screen.
Refer to MIXTRAX on page 56
*2
Displays the link search screen.
p This function is available for the external storage
device (USB, SD) only.
Refer to Selecting a song from the list related to
the song currently playing (link search) on page
45
*3
Selects a file from the list.
Refer to Selecting files from the file name list on
page 45
p When you play compressed audio files stored in
an external storage device (USB, SD), you can
search for a file using Music Browse.
Refer to Selecting a file by Music Browse on page
45
!"#$%&'(')%"*
&RPSUHVVHG¿OHV
&D
*4
Switches the media file type.
Refer to Switching the media file type on page
45
*5
Switches the subtitle/audio language.
p This function is available only for compressed
video files stored on a disc.
Refer to Switching the subtitle/audio language on
page 45
You can play compressed audio, compressed video or still image
files stored in a disc or an external storage device (USB, SD)
using the built-in drive of this product.
Refer to Media compatibility chart on page 80
p Depending on the model used, the SD source is not
available.
Refer to Supported AV source on page 9
p By pressing the or button, you can also skip files
forwards or backwards.
p By pressing and holding the or button on the
audio or video file, you can perform fast reverse or fast
forwards.
p By pressing and holding the or button on the still
image file, you can search through 10 JPEG files at a time.
If the file currently being played is the first or last file in the
folder, the search is not performed.
p JPEG images are not displayed in the rear display.
p You can set the screen size for the video and JPEG images.
Refer to Changing the wide screen mode on page 69
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
<#*)#('1&9)"3$>6)$&S/")&5(%3T
1 Insert the disc.
Refer to Inserting and ejecting a disc on page 6
p If the disc is already set, select [@HG4] as the playing source.
<#*)#('1&9)"3$>6)$&S/")&=<.E<5T
1 Insert the SD memory card into the SD card
slot or plug the USB storage device into the
USB connector.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
2 Display the AV source selection screen.
3 Touch [U)2] or [)@].
p Play back is performed in order of folder numbers. Folders
are skipped if they contain no playable files.
.ODQ@SHNMRÐBNLLNMÐSNÐ@KKÐÆKDÐ
#-9$%
2DKDBSHMFÐÆKDRÐEQNLÐSGDÐÆKDÐM@LDÐKHRS
You can find files or folders to play back using the file name or
folder name list.
1 Touch .
2 Touch a file on the list to play back.
p Touching a folder on the list shows its contents. You can play
a file on the list by touching it.
2VHSBGHMFÐSGDÐLDCH@ÐÆKDÐSXOD
When playing a digital media containing a mixture of various
media file types you can switch between media file types to play.
1 Touch .
2 Touch the item.
,<GH4:
Switches the media file type to music (compressed audio).
#H?8C:
Switches the media file type to video.
6@Z@":
Switches the media file type to CD (audio data (CD-DA)).
1EC=C:
Switches the media file type to still image (JPEG data).
TCHNÐÆKDÐNODQ@SHNMR
2DKDBSHMFÐ@ÐÆKDÐAXÐ,TRHBÐ!QNVRD
You can select files to play back using the category list if the files
contain tag information.
p This function is available for the external storage device
(USB, SD) only.
1 Touch .
2 Touch the “&3D” tab.
3 Touch the desired category to display the file
list.
4 Touch the item.
Refine the item until the desired song title or file name is dis-
played on the list.
5 Touch the desired song title or file name to
play back.
<$+$3#('1&*&%"'1&/)",&#2$&+(%#&)$+*#$>&
#"&#2$&%"'1&36))$'#+-&9+*-('1&S+('A&
%$*)32T
p This function is available for the external storage device
(USB, SD) only.
p If you touch the artwork, the list of songs in the album is
displayed.
1 Touch song information to open the list of
songs.
2 Touch the song to play back.
5HCDNÐÆKDÐNODQ@SHNMR
<I(#32('1&#2$&%64#(#+$E*6>("&
+*'16*1$
1 Touch or .
: Changes the subtitle language.
: Changes the audio language.
p You can specify the desired language as the default subtitle/
audio languages.
Refer to Setting the top-priority languages on page 67
!"#$%&'(')%"*
&RPSUHVVHG¿OHV
&V
2SHKKÐHL@FDÐÆKDÐNODQ@SHNMR
<$##('1&#2$&%+(>$%2"I&('#$)0*+
JPEG files can be viewed as a slideshow on this product. In this
setting, the interval between each image can be set.
The default setting is “dNG84”.
p This setting is available during playback of the JPEG files.
1 Display the “#H?8C()8=<;” screen.
2 Touch [&H78(189(1EC=C()BH?8].
3 Touch the item.
The following items are available:
hG84, dNG84, dhG84, ,3:<3B.
Audio source screen 1
*1
Switches between playback
and pause.
Skips files forward or
backward.
*2
*3
Sets the shuffle play.
: Normal playback
: Fast playback
: Slow-motion playback
Audio source screen 2
: Plays randomly songs or videos
within the selected list.
: Plays album randomly.
Sets a repeat play range.
: Repeats all in the selected list.
: Repeats the current song or video.
Changes the audiobook speed.
1
22
1/2
72-C
!"#$%&'(')%"*
&RPSUHVVHG¿OHV 72-C
&J
Video source screen
*2
*3
Performs fast reverse or
fast forward.
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
Apple Music Radio screen
*2
Switches between playback
and pause.
Skips tracks forward.
Displays the pop-up menu for
Apple Music Radio.
*1
Displays the link search screen.
Refer to Selecting a song from the list related to
the song currently playing (link search) on page
45
*2
Selects a song or video from the list.
Refer to Selecting song or video sources from the
playlist screen on page 47
*3
Switches the control mode to “";;(,C?8”.
Refer to Using this product’s iPod function from
your iPod on page 47
p By pressing the or button, you can also skip files/
chapters forwards or backwards.
— Skipping backwards is not available while playing ";;B8(
,<GH4(-3?HC.
p By pressing and holding the or button, you can
also perform fast reverse or fast forwards.
— This function is not available while playing ";;B8(,<GH4(
-3?HC.
p You can set the screen size for the video image.
Refer to Changing the wide screen mode on page 69
p The audiobook speed icon does not change when using this
function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone
5c, iPhone 5, or iPod touch (5th generation).
The setting changes as follows when the icon is touched,
even though the icon does not change.
Faster—Slower—Normal—Faster...
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
@"''$3#('1&-"6)&(B">
When connecting an iPod to this product, select the method for
connecting your device. Settings are required according to the
connected device.
Refer to Setup for iPod / iPhone or smartphone on page 34
p The available sources vary depending on the selected
method for connecting your device.
Refer to Information on the connections and functions for
each device on page 35
p Depending on the generation or version of the iPod, some
functions may not be available.
p The video image of the iPod may have noise if the rear
display outputs the video image. When noise is produced in
the video image of the iPod, turn off the output setting of the
rear display.
Refer to Selecting the video for the rear display on page
70
<#*)#('1&9)"3$>6)$
p When connecting an iPhone or iPod touch, quit all applica-
tions before connecting the device.
1 Connect your iPod.
Refer to Connecting your iPod on page 47
2 Display the AV source selection screen.
3 Touch [H1C?].
<$+$3#('1&%"'1&")&0(>$"&%"6)3$%&
/)",&#2$&9+*-+(%#&%3)$$'
You can search for the song, video, or radio stations you want to
play from the playlist screen.
1 Touch .
2 Touch or to switch the music or video
category list.
p The video category list icon is not available when using iPod
function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone
5c, iPhone 5, or iPod touch (5th generation).
3 Touch the category.
p If you use English as the system language, the alphabet
search function is available. Touch the initial search bar to
use this function.
4 Touch the title of the list.
5 Start playback of the selected list.
p You can play playlists created with the ,<GH4);E898 applica-
tion. The application is available on our website.
=%('1&#2(%&9)">63#]%&(B">&/6'3G
#("'&/)",&-"6)&(B">
You can control this product’s iPod function from the iPod on
“";;(,C?8”. The application screen of the iPod can be dis-
played on this product, and the music files and video files are
played back with this product.
!"#$%&'(')%"*
72-C
&'
p This function is not available when using iPod function with
an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5,
or iPod touch (5th generation).
p While this function is in use, the iPod will not turn off even if
the ignition key is turned off. Operate the iPod to turn off the
power.
1 Touch .
2 Operate the connected iPod to select a video or
song and play.
p Some functions are still accessible from this product even if
the control mode is set to “";;(,C?8”. However, the opera-
tion will depend on your applications.
Touch to switch the control mode.
<$+$3#('1&*&%"'1&/)",&#2$&+(%#&
)$+*#$>&#"&#2$&%"'1&36))$'#+-&
9+*-('1&S+('A&%$*)32T
p If you touch the artwork, the list of songs in the album is
displayed.
p This function is not available while playing ";;B8(,<GH4(
-3?HC.
1 Touch song information to open the list of
songs.
2 Touch the song to play back.
=%('1&:99+$&;6%(3&8*>("
Important
";;B8(,<GH4(-3?HC may not be available in your country or
region.
For details about Apple Music, visit the following site:
E==;[WWOOOR3;;B8R4C7W7<GH4W
p This function is only available when using iPod function with
an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5,
or iPod touch (5th generation).
1 Touch .
2 Touch .
3 Touch [-3?HC].
B+*-('1&4*3A&%"'1%&%(,(+*)&#"&#2$&36)G
)$'#&%"'1
You can listen to songs similar to the song currently being
played.
1 Touch .
2 Touch [1B3K(,C98(.H58(&EHG].
p When the menu item is not active, the function is not availa-
ble for the current song.
p If you touch [1B3K(,C98(.H58(&EHG] when the menu item is
highlighted, the function will turn off.
<$##('1&#2$&36))$'#&%"'1&'"#&#"&4$&
9+*-$>&4*3A&*1*('
You can set the current song not to be played back again.
1 Touch .
2 Touch [!8J89(1B3K(&EHG()C:D].
p When the menu item is not active, the function is not availa-
ble for the current song.
p If you touch [!8J89(1B3K(&EHG()C:D] when the menu item is
highlighted, the function will turn off.
:>>('1&#2$&36))$'#&%"'1&#"&#2$&I(%2&
+(%#
You can add the current song to the wish list for easy access to
the song later.
1 Touch .
2 Touch ["??(=C(H&<:8G(FHGE(.HG=].
p If the song is already in the wish list, [-87CJ8(Q9C7(H&<:8G(
FHGE(.HG=] is displayed. If you touch this key, the song will be
removed from the wish list.
Displays the launcher
application screen.
Displays the previous screen.
Displays the menu screen.
Displays the current source.
p Press the button twice to hide the App control side bar.
Press the button twice again to display it again.
p and are not available depending on the type of
device.
WARNING
Certain uses of an iPhone or a smartphone may not be legal
while driving in your jurisdiction, so you must be aware of and
obey any such restrictions.
If in doubt as to a particular function, only perform it while the
car is parked.
No feature should be used unless it is safe to do so under the
driving conditions you are experiencing.
:998*>("&;">$&@",9*#(4(+(#-
p LMN@"2/LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
";;-3?HC(,C?8 is only available on an iPhone.
iPhone models
iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus
iPod touch (4th, 5th generation)
$SS5DGLR0RGH
!"#$%&'(')%"*
72-C $SS5DGLR0RGH
&O
Smartphone (Android) models
For details about Android device compatibility with this
product, refer to the information on our website.
=%('1&:998*>("&;">$
You can control applications for an iPhone or a smartphone
directly from the screen (";;-3?HC(,C?8).
In ";;-3?HC(,C?8, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
Important
To use ";;-3?HC(,C?8, install the AppRadio app on the
iPhone or smartphone in advance. For details about the
AppRadio app, visit the following site:
E==;[WWOOOR;HC:889R8<W";;-3?HC,C?8
Be sure to read Using app-based connected content before
you perform this operation.
Refer to Using app-based connected content on page 83
Content and functionality of compatible applications are
the responsibility of the App providers.
In ";;-3?HC(,C?8, usage is limited while driving, with
availability of functions and content determined by the
App providers.
";;-3?HC(,C?8 allows access to applications other
than those listed, subject to limitations while driving.
PIONEER IS NOT RESPONSIBLE AND DISCLAIMS
LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY
INACCURACIES OR INCOMPLETE INFORMATION.
p In this chapter, iPhone and iPod touch will be referred to as
“iPhone”.
p The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p Even though an application is not compatible with
";;-3?HC(,C?8, depending on the application an image
may be displayed. But you can not operate the application.
<#*)#('1&9)"3$>6)$
When connecting an iPhone or smartphone to this product,
select the method for connecting your device. Settings are
required according to the connected device.
Refer to Setup for iPod / iPhone or smartphone on page 34
p Touch the desired application icon after the AppRadio app is
launched.
After the desired application is launched, the application
operation screen appears.
p If you connect your device while an ";;-3?HC(,C?8-
compatible application is already running, the application
operation screen will appear on this product.
p Press the button to go back to the top menu screen.
P")&(B2"'$&6%$)%
p When you use an iPhone with a Lightning connector,
connect the iPhone to this product via Bluetooth wireless
technology and unlock the iPhone in advance.
Refer to Registering your Bluetooth devices on page 30
1 Connect your iPhone.
Refer to the Installation Manual.
2 Press the button.
3 Touch ["11)].
p When you use an iPhone with a 30-pin connector, messages
appear on the screen of this product and your iPhone.
Proceed to the next step.
p When you use an iPhone with a Lightning connector, the
";;-3?HC(3;; is launched, and the ";;-3?HC(,C?8
screen (Application menu screen) appears after this step. In
such a case, the following steps are not required.
4 Use your iPhone to launch the application.
The ";;-3?HC(3;; is launched.
5 Touch ['A] on the screen of this product.
The ";;-3?HC(,C?8 screen (Application menu screen)
appears.
P")&%,*)#92"'$&S:'>)"(>T&6%$)%
F88DAB
1 Register your smartphone and connect it to this
product via Bluetooth wireless technology.
Refer to Registering your Bluetooth devices on page 30
2 Unlock your smartphone and connect it to this
product.
Refer to the Installation Manual.
3 Press the button.
4 Touch ["11)].
The ";;-3?HC(3;; is launched, and the ";;-3?HC(,C?8
screen (Application menu screen) appears.
=%('1&#2$&A$-4"*)>&S/")&(B2"'$&
6%$)%T
When you tap the text input area of an application for iPhone,
a keyboard will be displayed on the screen. You can input the
desired text directly from this product.
p This function may not be available depending on your
iPhone.
p This function is only available in ";;-3?HC(,C?8 on the
iPhone.
CAUTION
For your safety, the keyboard functionality is only available
when the vehicle is stopped and the handbrake is engaged.
1 Set the keyboard language.
Refer to Setting the keyboard language with the application for
iPhone on page 60
2 Start up ";;-3?HC(,C?8.
Refer to Starting procedure on page 49
3 Touch the text input area on the application
operation screen.
A keyboard for entering text appears.
!"#$%&'(')%"*
$SS5DGLR0RGH
DZ
:>76%#('1&#2$&(,*1$&%(_$&S/")&
%,*)#92"'$&S:'>)"(>T&6%$)%T
F88DAB
Black dots may appear on the screen when using ";;-3?HC(
,C?8 with an Android device connected to this product.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p This function can be set when your Android device is able to
enter ";;-3?HC(,C?8.
p The setting screen automatically appears in the following
cases:
— When entering ";;-3?HC(,C?8 after a Bluetooth
connection using SPP (Serial Port Profile) has been
established.
— When a Bluetooth connection using SPP (Serial Port
Profile) has been established in ";;-3?HC(,C?8.
1 Display the “)KG=87” setting screen.
2 Touch [$:;<=W'<=;<=()8==H:DG].
3 Touch [";;-3?HC(#H?8C("?i<G=78:=].
4 Touch ['A].
5 Touch , , or to adjust the line to fit
smartphone image size.
6 Touch [198JH8O].
7 Touch ['A].
If you want to adjust the setting again from the
beginning, touch [-+)+&].
=%('1&#2$&*6>("&,(Z&/6'3#("'
You can output audio mixing AV source and an application for
iPhone or smartphone when ";;-3?HC(,C?8 is used.
p Depending on the application or the AV source, this function
may not be available.
p When the audio mix function is set to on, the voice guidance
of the navigation system is not output. To output the voice
guidance of the navigation system, set the audio mix func-
tion to off.
1 Start up ";;-3?HC(,C?8.
Refer to Starting procedure on page 49
2 Press the #'. (//0) button.
The audio mix menu will be displayed on the screen.
p The audio mix menu is displayed for four seconds. If the
screen disappears, press the #'. (//0) button again. The
screen reappears.
p The AV operation screen and the Application screen can be
switched by pressing the ,'@+ button.
1 2 3
1 Touch to mute. Touch again to unmute.
2 Sets whether to switch the sound mix function on or off.
Left tab:
The audio mix function is enabled (mix on) and the App
volume is displayed.
Right tab:
The audio mix function is disabled (mix off).
p The right tab is not displayed on the AV operation screen.
3 Adjusts the application audio volume.
p The App volume is not displayed when the right tab is
selected.
p You cannot adjust the volume of the main sound on the
screen. Press the #'. (//0) button to adjust the volume of
the main sound.
You can control applications for an iPhone directly from the
screen (";;B8(6391B3K).
In ";;B8(6391B3K, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
p This function is only available when using iPod function with
an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, or iPhone
5.
WARNING
Certain uses of an iPhone may not be legal while driving in
your jurisdiction, so you must be aware of and obey any such
restrictions.
If in doubt as to a particular function, only perform it while the
car is parked.
No feature should be used unless it is safe to do so under the
driving conditions you are experiencing.
=%('1&:99+$&@*)B+*-
Important
";;B8(6391B3K may not be available in your country or region.
For details about ";;B8(6391B3K, visit the following site:
E==;[WWOOOR3;;B8R4C7WHCGW439;B3K
Content and functionality of compatible applications are
the responsibility of the App providers.
In ";;B8(6391B3K, usage is limited while driving, with
availability of functions and content determined by the
App providers.
";;B8(6391B3K allows access to applications other than
those listed, subject to limitations while driving.
PIONEER IS NOT RESPONSIBLE AND DISCLAIMS
LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY
INACCURACIES OR INCOMPLETE INFORMATION.
p The compatible finger gestures vary depending on the
application for an iPhone.
<#*)#('1&9)"3$>6)$
When connecting an ";;B8(6391B3K-compatible device to this
product, select the method for connecting your device. Settings
are required according to the connected device.
Refer to Setup for iPod / iPhone or smartphone on page 34
p To achieve optimum usability of ";;B8(6391B3K, set the
driving position setting correctly according to the vehicle.
Refer to Setting the driving position on page 51
!99G08$532G5E
!"#$%&'(')%"*
$SS5DGLR0RGH !99G08$532G5E
D(
p You can adjust the guidance volume and alert sound vol-
ume separately from the main sound volume when ";;B8(
6391B3K is used.
Refer to Adjusting the volume on page 51
1 Connect an ";;B8(6391B3K-compatible device to
this product via USB.
Refer to the Installation Manual.
The Application menu screen appears.
p If an ";;B8(6391B3K-compatible device has been connected
and another screen is displayed, touch [";;B8(6391B3K] on
the top menu screen to display the Application menu screen.
p The Bluetooth connection with the ";;B8(6391B3K-
compatible device will be terminated automatically if ";;B8(
6391B3K is turned on. While ";;B8(6391B3K is turned on, only
a Bluetooth audio connection will be possible for devices
other than the device connected via ";;B8(6391B3K.
p Hands-free phoning via Bluetooth wireless technology is
not available while ";;B8(6391B3K is on. If ";;B8(6391B3K
is turned on during a call on a mobile phone other than the
";;B8(6391B3K-compatible device, the Bluetooth connection
will be terminated after the call ends.
p The route guidance by the internal navigation system will
stop automatically if the route guidance function in ";;B8(
6391B3K is launched.
<$##('1&#2$&>)(0('1&9"%(#("'
To achieve optimum usability of ";;B8(6391B3K, set the driving
position setting correctly according to the vehicle.
The default setting is “.8Q=”.
1 Display the “)KG=87” setting screen.
2 Touch [@9HJH:D(1CGH=HC:].
3 Touch the item.
.8Q=:
Select for a left-hand drive vehicle.
-HDE=:
Select for a right-hand drive vehicle.
The setting will be applied the next time an ";;B8(6391B3K-
compatible device is connected to this product.
:>76%#('1&#2$&0"+6,$
You can adjust the guidance volume and alert sound volume
separately from the main sound volume when ";;B8(6391B3K
is used.
1 Start up ";;B8(6391B3K.
Refer to Starting procedure on page 50
2 Press the #'. (//0) button.
The volume menu will be displayed on the screen.
p The volume menu is displayed for four seconds. If the menu
disappears, press the #'. (//0) button again. The menu
reappears.
3
21
1 Touch to mute. Touch again to unmute.
2 Displays the main sound volume.
p You cannot adjust the volume of the main sound on the
screen. Press the #'. (//0) button to adjust the volume of
the main sound.
3 Adjusts the guidance volume and alert sound volume.
p Each touch of [/] or [0] increases or decreases the volume
level.
F88DAB
F80DAB
You can control applications for a smartphone directly from the
screen (":?9CH?("<=C).
In ":?9CH?("<=C, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
p Android devices running Android 5.0 or higher are compati-
ble with ":?9CH?("<=C.
WARNING
Certain uses of a smartphone may not be legal while driving in
your jurisdiction, so you must be aware of and obey any such
restrictions.
If in doubt as to a particular function, only perform it while the
car is parked.
No feature should be used unless it is safe to do so under the
driving conditions you are experiencing.
=%('1&:'>)"(>&:6#"
Important
":?9CH?("<=C may not be available in your country or region.
For details about ":?9CH?("<=C, please refer to the Google
support site:
E==;[WWG<;;C9=RDCCDB8R4C7W3:?9CH?3<=C
Content and functionality of compatible applications are
the responsibility of the App providers.
In ":?9CH?("<=C, usage is limited while driving, with
availability of functions and content determined by the
App providers.
":?9CH?("<=C allows access to applications other than
those listed, subject to limitations while driving.
PIONEER IS NOT RESPONSIBLE AND DISCLAIMS
LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY
INACCURACIES OR INCOMPLETE INFORMATION.
p The compatible finger gestures vary depending on the
application for a smartphone.
<#*)#('1&9)"3$>6)$
When connecting an ":?9CH?("<=C-compatible device to this
product, select the method for connecting your device. Settings
are required according to the connected device.
Refer to Setup for iPod / iPhone or smartphone on page 34
!.C3-7C8!6/-™
!"#$%&'(')%"*
!99G08$532G5E !.C3-7C8!6/-™
D+
p To achieve optimum usability of ":?9CH?("<=C, set the
driving position setting correctly according to the vehicle.
Refer to Setting the driving position on page 52
p
You can adjust the guidance volume and alert sound volume sepa-
rately from the main sound volume when ":?9CH?("<=C is used.
Refer to Adjusting the volume on page 52
p If the auto-launch function is set, ":?9CH?("<=C will launch
automatically as soon as a connection to an ":?9CH?("<=C-
compatible device is established.
Refer to Setting the auto-launch function on page 52
1 Connect an ":?9CH?("<=C-compatible device to
this product via USB.
Refer to the Installation Manual.
2 Press the button.
3 Touch [":?9CH?("<=C].
A Bluetooth connection with the ":?9CH?("<=C-compatible
device will automatically be established and a Bluetooth connec-
tion with any other device will be terminated.
p
If three devices are already paired, the message confirming
whether to delete the registered device is displayed. If you want
to delete the device, touch ["D988]. If you want to delete other
device, touch [2&()8==H:DG] and delete the device manually.
Refer to Registering your Bluetooth devices on page 30
p If ":?9CH?("<=C is turned on during a call on a mobile
phone other than the ":?9CH?("<=C-compatible device,
the Bluetooth connection will switch to the ":?9CH?("<=C-
compatible device after the call ends.
<$##('1&#2$&*6#"G+*6'32&
/6'3#("'
If this function is set to on, ":?9CH?("<=C will launch automat-
ically when an ":?9CH?("<=C-compatible device is connected
to this product.
The default setting is “':”.
p ":?9CH?("<=C will launch automatically only when
“)739=;EC:8()8=<;” is correctly set for using ":?9CH?(
"<=C and an ":?9CH?("<=C-compatible device is correctly
connected to this product.
1 Display the “)KG=87” setting screen.
2 Touch [":?9CH?("<=C("<=CZB3<:4E] to switch
“':” or “'QQ”.
<$##('1&#2$&>)(0('1&9"%(#("'
To achieve optimum usability of ":?9CH?("<=C, set the driving
position setting correctly according to the vehicle.
The default setting is “.8Q=”.
1 Display the “)KG=87” setting screen.
2 Touch [@9HJH:D(1CGH=HC:].
3 Touch the item.
.8Q=:
Select for a left-hand drive vehicle.
-HDE=:
Select for a right-hand drive vehicle.
The setting will be applied the next time an ":?9CH?("<=C-
compatible device is connected to this product.
:>76%#('1&#2$&0"+6,$
You can adjust the guidance volume and alert sound volume
separately from the main sound volume when ":?9CH?("<=C
is used.
1 Start up ":?9CH?("<=C.
Refer to Starting procedure on page 51
2 Press the #'. (//0) button.
The volume menu will be displayed on the screen.
p The volume menu is displayed for four seconds. If the menu
disappears, press the #'. (//0) button again. The menu
reappears.
3
21
1 Touch to mute. Touch again to unmute.
2 Displays the main sound volume.
p You cannot adjust the volume of the main sound on the
screen. Press the #'. (//0) button to adjust the volume of
the main sound.
3 Adjusts the guidance volume and alert sound volume.
p Each touch of [/] or [0] increases or decreases the volume
level.
!"#$%&'(')%"*
!.C3-7C8!6/-™
DS
Playback screen 1
Skips files forward or backward.
Plays files in random order.
Playback screen
2
Sets a repeat play range.
Switches between playback
and pause.
Selects a file from the list.
Refer to Selecting files from the file name list on
page 53
p Depending on the Bluetooth audio player connected to this
product, the available operations with this product may be
limited to the following two levels:
— A2DP (Advanced Audio Distribution Profile): Only playing
back songs on your audio player is possible.
— A2DP and AVRCP (Audio/Video Remote Control Profile):
Playing back, pausing, selecting songs, etc., are possible.
p Depending on the Bluetooth audio player connected to this
product, some functions may not be available.
p While you are listening to songs on your Bluetooth device,
please refrain from operating the phone function as much as
possible. If you try operating, the signal may cause noise for
song playback.
p When you are talking on the Bluetooth device connected to
this product via Bluetooth, it may pause playback.
p By pressing the or button, you can also skip files
forwards or backwards.
p By pressing and holding the or button, you can
also perform fast reverse or fast forwards.
<#*)#('1&9)"3$>6)$
p Before using the Bluetooth audio player, register and con-
nect the device to this product.
Refer to Registering your Bluetooth devices on page 30
1 Pull out the connecting cable for using
";;-3?HC(,C?8.
p You cannot use Bluetooth audio player when the connecting
cable for using ";;-3?HC(,C?8 is connected.
2 Display the “)KG=87” setting screen.
3 Touch ["#()C<948()8==H:DG].
4 Confirm that “2B<8=CC=E("<?HC” is turned on.
5 Display the AV source selection screen.
6 Touch [2B<8=CC=E("<?HC].
2DKDBSHMFÐÆKDRÐEQNLÐSGDÐÆKDÐ
'*,$&+(%#
p This function is available only when the AVRCP version of the
Bluetooth device is 1.4 or higher.
1 Touch .
2 Touch a file or a folder on the list to play back.
)G60/--/<856C7-89G5E03
!"#$%&'(')%"*
)G60/--/<856C7-89G5E03
D&
F88DAB
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
p A High Speed HDMI® Cable (sold separately) is required for
connection.
Refer to the Installation Manual.
p You can set the screen size for the video image.
Refer to Changing the wide screen mode on page 69
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
<#*)#('1&9)"3$>6)$
1 Display the AV source selection screen.
2 Touch [S@,$].
Switches between the video input
and the sound input.
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.
Refer to the Installation Manual.
p You can set the screen size for the video image.
Refer to Changing the wide screen mode on page 69
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
<#*)#('1&9)"3$>6)$
You can display the video image output by the device connected
to video input.
1 Display the “)KG=87” setting screen.
2 Touch [$:;<=W'<=;<=()8==H:DG].
3 Confirm that “"Uj($:;<=” is turned on.
4 Display the AV source selection screen.
5 Touch ["Uj].
<$##('1&#2$&0(>$"&%(1'*+
When you connect this product to an AUX equipment, select the
suitable video signal setting.
The default setting is “"<=C”.
p You can operate this function only for the video signal input
into the AUX input.
1 Display the “#H?8C()8=<;” screen.
2 Touch [#H?8C()HD:3B()8==H:D].
3 Touch ["Uj].
4 Touch the item.
The following items are available:
"<=C, 1"., !&)6, 1".Z,, 1".Z!, )+6",.
+'0,VRXUFH!JK81-6340
!"#$%&'(')%"*
+'0,VRXUFH !JK81-6340
DD
Hides the touch panel keys.
To display again the keys, touch
anywhere on the screen.
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.
<#*)#('1&9)"3$>6)$&S/")&:J&
%"6)3$T
You can display the video image output by the device connected
to video input.
Refer to the Installation Manual.
1 Display the “)KG=87” setting screen.
2 Touch [$:;<=W'<=;<=()8==H:DG].
3 Touch ["#($:;<=].
4 Touch [)C<948].
p If “)C<948” is selected, “>:?(637893($:;<=” is automatically
set to “'QQ”.
Refer to Setting the second camera activation on page 59
5 Display the AV source selection screen.
6 Touch ["#].
<#*)#('1&9)"3$>6)$&S/")&3*,$)*T
You can display the image output by the camera connected to
video input.
Refer to the Installation Manual.
1 Display the “)KG=87” setting screen.
2 Touch [$:;<=W'<=;<=()8==H:DG].
3 Touch ["#($:;<=].
4 Touch [637893].
5 Display the AV source selection screen.
6 Touch [637893(#H8O].
p When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears.
Touch this key to switch the display between the rear view
image and 2nd camera image.
<$##('1&#2$&0(>$"&%(1'*+
When you connect this product to an AV equipment, select the
suitable video signal setting.
The default setting is “"<=C”.
p You can operate this function only for the video signal input
into the AV input.
1 Display the “#H?8C()8=<;” screen.
2 Touch [#H?8C()HD:3B()8==H:D].
3 Touch ["#].
4 Touch the item.
The following items are available:
"<=C, 1"., !&)6, 1".Z,, 1".Z!, )+6",.
!"87.96/
!"#$%&'(')%"*
!"87.96/
DV
Selects a track.
Turns on or off the MIXTRAX
original visual display.
Displays the LinkGate screen.
Touch the desired item. Songs
related to the selected item are
played.
Switches between playback and
pause.
Displays the item selected on the
LinkGate screen or item selection
screen.
Exits the MIXTRAX screen. Specifies the BPM.
Sets to the original BPM
(Beats Per Minute).
Specifies the playback portion.
: Plays back a middle portion.
: Plays back a long portion.
: Plays back a short portion.
*1
*2
*1
Selects an item from the list.
Refer to Selecting an item from the list on page
56
*2
Selects songs not to be played.
Refer to Selecting songs not to be played on page
56
=%('1&;D`?8:`
MIXTRAX is original technology for creating non-stop mixes of
selections from your audio library, complete with DJ effects that
make them sound.
p FLAC files are skipped during MIXTRAX playback.
<#*)#('1&9)"3$>6)$
1 Insert the SD memory card into the SD card
slot or plug the USB storage device into the
USB connector.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
2 Display the AV source selection screen.
3 Touch [U)2] or [)@].
4 Touch [,$j&-"j].
<$+$3#('1&*'&(#$,&/)",&#2$&+(%#
You can specify an item to play songs related to it.
1 Touch .
The following lists are available:
: displays the mix pattern list.
: displays the tag list.
: displays the file list.
2 Touch an item in the list.
<$+$3#('1&%"'1%&'"#&#"&4$&
9+*-$>
You can select items or songs not to be played.
1 Touch .
2 Touch .
3 Touch the category.
4 Touch the box on the left of the item or song
that you do not want to play.
0,;75$;
!"#$%&'(')%"*
0,;75$;
DJ
5(%9+*-('1&#2$&U;D`?8:`&
<$##('1%V&%3)$$'
1 Display the “)KG=87” setting screen.
2 Touch ["#()C<948()8==H:DG].
3 Touch [,$j&-"j()8==H:DG].
2DSSHMFÐSGDÐÇ@RGÐO@SSDQM
The flashing colour changes with the changes in the sound and
bass levels.
The default setting is “)C<:?d”.
1 Display the “,$j&-"j()8==H:DG” screen.
Refer to Displaying the “,$j&-"j()8==H:DG” screen on page
57
2 Touch [LB3GE(13==89:].
3 Touch the item.
)C<:?d to )C<:?e:
The flash pattern changes according to the sound level.
.Z13GGd to .Z13GGe:
The flash pattern changes according to the bass level.
-3:?C7d:
The flash pattern changes randomly according to the sound
level mode and low pass mode.
-3:?C7>:
The flash pattern changes randomly according to the sound
level mode.
-3:?C7^:
The flash pattern changes randomly according to the low
pass mode.
'QQ:
The flash pattern does not flash.
F88DAB
F80DAB
F980DAB
F9880DAB
Switches the display to the rear
view camera image.
The display switches only when the rear view
camera setting is set to “On” and the gearstick
is in the REVERSE (R) position.
The position of detected obstacles
Parking Assist screen
The fan direction
The heating setting for the seat
The internal temperature
setting for the seat
The fan speed
A/C Control screen
The status of the A/C function
=%('1&#2$&J$2(3+$&.6%&*>*9#$)
By connecting the optional Vehicle Bus adapter, you can display
the operation status of the vehicle’s parking sensor function and
climate control panel on the screen.
Important
For information on installing the Vehicle Bus adapter, see
the operating manual of the Vehicle Bus adapter.
After installing the Vehicle Bus adapter, be sure to check
operations.
For details about vehicle models that are compatible with
Vehicle Bus adapters, refer to the information on our website.
Functions and displays vary depending on the vehicle
model. For details of the functions available according to
the model, refer to the information on our website.
"0<74G080L679@0./87.B-3@5/7-.
!"#$%&'(')%"*
0,;75$; "0<74G080L679@0./87.B-3@5/7-.
D'
5(%9+*-('1&"4%#*3+$&>$#$3#("'&
('/"),*#("'
CAUTION
This function is intended solely to assist the driver’s vision.
It does not detect all dangers and obstacles and is not a
substitute for your attentiveness, judgement, and care while
parking your vehicle.
p This function is only available for vehicles equipped with a
parking sensor system.
p The “1395H:D("GGHG=” screen is not displayed until this
product boots up completely.
1 Turn on the parking assist sensor on your
vehicle.
The “1395H:D("GGHG=” screen appears.
5(%9+*-('1&#2$&"9$)*#('1&%#*#6%&
"/&#2$&3+(,*#$&3"'#)"+&9*'$+
When you operate the climate control panel of the vehicle, the
screen switches automatically to the “"W6(6C:=9CB” screen.
p The settings of the climate control panel operated before this
product is started are not displayed on the screen.
p Any climate control panel settings of the vehicle that are
turned off are not displayed on the screen.
p If the information displayed on the screen is reversed for
the left and right sides of the vehicle, change the “6BH73=8(
-8J89G8” setting to “':”.
Refer to Reversing the climate control status display on
page 60
5(%9+*-('1&#2$&U<-%#$,V&%$#G
#('1&%3)$$'
1 Press the button.
2 Touch , and then .
<$##('1&#2$&'*0(1*#("'&('/"),*G
#("'&4*)
You can set whether to display the guidance information of the
navigation on the AV operation screen.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [!3JHD3=HC:(-8B3=8?()8==H:DG].
3 Touch [!3JHD3=HC:(H:QC(OH:?CO] to switch
“':” or “'QQ”.
<$##('1&'*0(1*#("'&%3)$$'&
('#$))69#("'
You can set whether to automatically switch to the navigation
screen from the AV screen or the application screen when your
vehicle approaches a guidance point such as an intersection.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [!3JHD3=HC:(-8B3=8?()8==H:DG].
3 Touch ["#W";;(%<H?8(,C?8] to switch “':” or
“'QQ”.
<$##('1&.+6$#""#2&*6>("&%"6)3$&
*3#(0*#("'
The default setting is “':”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch ["#()C<948()8==H:DG].
3 Touch [2B<8=CC=E("<?HC] to switch “':” or
“'QQ”.
<$##('1&#2$&$0$)&%3)"++
When “+J89()49CBB” is set to “':”, the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is “'QQ”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [+J89()49CBB] to switch “':” or “'QQ”.
<$##('1&#2$&4$$9&#"'$
The default setting is “':”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [288;(&C:8] to switch “':” or “'QQ”.
<$##('1&#2$&)$*)&0($I&3*,$)*
A separately sold rear view camera (e.g. ND-BC8) is required
for utilising the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the gearstick is in the REVERSE (R) position.
637893(#H8O mode also allows you to check what is behind you
while driving.
Camera for Camera View mode
637893(#H8O can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
To display the camera image, touch [637893(#H8O] on the AV
source selection screen.
Refer to Source on the AV source selection screen on page
9
p To set the rear view camera as the camera for Camera View
mode, set “2345(637893($:;<=” to “':”.
p When using the 2nd camera, set “"#($:;<=” to “637893”.
CAUTION
Check to make sure settings for rear view camera displays a
mirror reversed image.
p Immediately verify whether the display changes to a
rear view camera image when the gearstick is moved to
REVERSE (R) from another position.
AE1/0@810//7.?1
!"#$%&'(')%"*
"0<74G080L679%
@0./87.B-3@5/7-.
AE1/0@810//7.?1
DO
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in “-8J89G8(%839()8==H:DR”.
p If you touch while the camera image is displayed, the
displayed image will turn off temporarily.
p When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears.
Touch this key to switch the display between the rear view
image and 2nd camera image.
<$##('1&)$*)&0($I&3*,$)*&*3#(0*#("'
The default setting is “'QQ”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [2345(637893($:;<=] to switch “':” or
“'QQ”.
<$##('1&#2$&9"+*)(#-&"/&#2$&)$*)&0($I&
3*,$)*
The default setting is “23==89K”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [-8J89G8(%839()8==H:DR].
23==89K:
The polarity of the connected lead is positive.
%9C<:?:
The polarity of the connected lead is negative.
p If no camera connection is made and the camera polarity
setting is wrong, a black screen is displayed as the rear view
camera image immediately after startup. In such a case,
press and hold the ,"1 button to release the rear view
camera screen and then change the camera polarity setting
to “23==89K”.
<$##('1&#2$&)$0$)%$>&(,*1$&>(%9+*-&
/")&#2$&)$*)&0($I&(,*1$
You can set whether to reverse the rear view camera images to
be displayed on the front screen.
The default setting is “'QQ”.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p This function is available when “2345(637893($:;<=” is set
to “':”.
Refer to Setting rear view camera activation on page 59
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [2345(637893[(-8J89G8(#H?8C] to switch
“':” or “'QQ”.
<$##('1&#2$&9*)A('1&*%%(%#&16(>$+('$%
5(%9+*-('1&#2$&9*)A('1&*%%(%#&
16(>$+('$%
You can set whether to display the parking assist guidelines on
the rear view camera images when backing up your vehicle.
The default setting is “'QQ”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [1395H:D("GGHG=(%<H?8] to switch “':” or
“'QQ”.
:>76%#('1&#2$&9*)A('1&*%%(%#&
16(>$+('$%
CAUTION
When adjusting the guidelines, be sure to park the vehicle
in a safe place and apply the handbrake.
Before getting out of the car to place the markings, be sure
to turn the ignition switch off (ACC OFF).
The range projected by the rear view camera is limited.
Also, the vehicle width and distance guidelines displayed
on the rear view camera image may differ from the actual
vehicle width and distance. (The guidelines are straight
lines.)
The image quality may deteriorate depending on the usage
environment, such as at night or in dark surroundings.
1 Park your vehicle in a safe place and apply the
handbrake.
2 Using packing tape or similar, place markings
as follows.
Rear bumper
25 cm
25 cm
50 cm
2 m
Markings
Markings
3 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
4 Touch [637893(G8==H:DG].
5 Touch [1395H:D("GGHG=(%<H?8("?i<G=].
6 Set the guidelines by dragging the four points.
Adjust the guidelines so that the guidelines can be overlaid to
the markings
p Touch / / / / / to adjust the guidelines if
necessary. Touch [@8Q3<B=] to reset the settings.
<$##('1&#2$&%$3"'>&3*,$)*
You can view images of the second camera (a front camera etc.)
on the screen of this product.
<$##('1&#2$&%$3"'>&3*,$)*&*3#(0*#("'
The default setting is “'QQ”.
p This function is synchronized with “"#($:;<=” setting.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [>:?(637893($:;<=] to switch “':” or
“'QQ”.
!"#$%&'(')%"*
AE1/0@810//7.?1
VZ
<$##('1&#2$&)$0$)%$>&(,*1$
The default setting is “'QQ”.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p This function is available when “"#($:;<=” is set to
“637893” or “>:?(637893($:;<=” is set to “':”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [>:?(637893[(-8J89G8(JH?8C] to switch
“':” or “'QQ”.
<$##('1&#2$&3*,$)*&/")&@*,$)*&
J($I&,">$
To display Camera View at all times, “637893(#H8O” needs to be
set to “':”. (The same mode is turned on when is touched
on the camera view screen. The setting value is synchronized.)
The default setting is “'QQ”.
p To set the rear view camera as the camera for Camera View
mode, set “2345(637893($:;<=” to “':”.
Refer to Setting rear view camera activation on page 59
p When using the second camera, set “"#($:;<=” to
“637893” or “>:?(637893($:;<=” to “':” (both settings are
synchronized).
Refer to Setting the second camera on page 59
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [637893(G8==H:DG].
3 Touch [637893(#H8O] to switch “':” or “'QQ”.
p You can also turn this function on by touching [637893(
#H8O] on the AV source selection screen or in the source
list.
<$##('1&#2$&%*/$&,">$
You can set the safe mode that regulate operating some func-
tions only when you stop your vehicle in a safe place and apply
the handbrake.
The default setting is “':”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)3Q8(,C?8] to switch “':” or “'QQ”.
<$##('1&#2$&>$,"&,">$
The default setting is “':”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [@87C(,C?8] to switch “':” or “'QQ”.
<$+$3#('1&#2$&%-%#$,&+*'16*1$
p If the embedded language and the selected language setting
are not the same, text information may not display properly.
p Some characters may not be displayed properly.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)KG=87(.3:D<3D8].
3 Touch the language.
8$0$)%('1&#2$&3+(,*#$&3"'#)"+&
%#*#6%&>(%9+*-
When the optional vehicle bus adapter is connected, the left/
right display of the climate control status screen can be reversed
if the display does not match that of the vehicle.
The default setting is “'QQ”.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [6BH73=8(-8J89G8] to switch “':” or
“'QQ”.
<$##('1&#2$&A$-4"*)>&+*'16*1$&
I(#2&#2$&*99+(3*#("'&/")&(B2"'$
You can use the keyboard in ";;-3?HC(,C?8 by setting the
language of the keyboard for iPhone.
p This function is only available in ";;-3?HC(,C?8 on the
iPhone.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [A8KTC39?].
3 Touch the language.
:>76%#('1&#2$&)$%9"'%$&9"%(G
#("'%&"/&#2$&#"632&9*'$+&S#"632&
9*'$+&3*+(4)*#("'T
F80DAB
F980DAB
F980BT
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [&C<4E(13:8B(63BHT93=HC:].
3 Touch two corners of the screen along the
arrows, and then touch the centres of two +
marks at the same time twice.
4 Press the button.
The adjustment results are saved.
5 Press the button once again.
Proceed to 16-point adjustment.
6 Gently touch the centre of the “+” mark dis-
played on the screen.
The target indicates the order.
When you press the button, the previous
adjustment position returns.
When you press and hold the button, the
adjustment is cancelled.
7 Press and hold the button.
The adjustment results are saved.
!"#$%&'(')%"*
AE1/0@810//7.?1
V(
<$##('1&#2$&>(,,$)
<$##('1&#2$&>(,,$)&#)(11$)
The default setting is “"<=C”.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [@H7789()8==H:DG].
3 Touch [@H7789(&9HDD89].
4 Touch the item.
"<=C:
Switches the dimmer to on or off automatically according to
your vehicle’s headlight turning on or off.
,3:<3B:
Switches the dimmer to on or off manually.
&H78:
Switches the dimmer to on or off at the time you adjusted.
<$##('1&#2$&>(,,$)&>6)*#("'&('&>*-&
")&'(12#
The default setting is “@3K”.
p You can use this function when “@H7789(&9HDD89” is set to
“,3:<3B”.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [@H7789()8==H:DG].
3 Touch [@3KW!HDE=] to switch the following
items.
@3K:
Turns the dimmer function to off.
!HDE=:
Turns the dimmer function to on.
<$##('1&#2$&>(,,$)&>6)*#("'&
"9#("'*+
You can adjust the time that the dimmer is turned on or off.
The default setting is 18:00-6:00 (6:00 PM-6:00 AM).
p You can use this function when “@H7789(&9HDD89” is set to
“&H78”.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [@H7789()8==H:DG].
3 Touch [@H7789(@<93=HC:].
4 Drag the cursors to set the dimmer duration.
You can also set the dimmer duration touching
or .
p The time display of the dimmer duration adjusting bar is
depending on the clock display setting.
Refer to Setting the time and date on page 69
:>76%#('1&#2$&9(3#6)$
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the handbrake.
1 Display the screen you want to adjust.
2 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
3 Touch [1H4=<98("?i<G=78:=].
4 Touch the item to select the function to be
adjusted.
29HDE=:8GG:
Adjusts the black intensity. (–24 to +24)
6C:=93G=:
Adjusts the contrast. (–24 to +24)
4CBC<9:
Adjusts the colour saturation. (–24 to +24)
S<8:
Adjusts the tone of colour (which colour is emphasised, red
or green). (–24 to +24)
@H7789(.8J8B:
Adjusts the brightness of the display. (+1 to +48)
&87 ; 89 3 =< 9 8 :
Adjusts the colour temperature, resulting in a better white
balance. (–3 to +3)
p With some pictures, you cannot adjust “S<8” and “4CBC<9”.
When you touch [-839(#H8O] or [>:?(637893],
the mode changes to the selected camera mode.
By touching [)C<948], [!3JH] or [";;G], you can
return to the selected mode.
5 Touch , , , to adjust.
p The adjustments of “29HDE=:8GG”, “6C:=93G=” and “@H7789(
.8J8B” are stored separately for the on/off status of the dim-
mer function. These are switched automatically depending
on whether the dimmer function is on or off.
p The picture adjustment may not be available with some rear
view cameras.
p The setting contents can be memorised separately.
#HROK@XHMFÐSGDÐÆQLV@QDÐ
0$)%("'
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)KG=87($:QC973=HC:].
3 Touch [LH97O398($:QC973=HC:].
5(%9+*-('1&#2$&"9$'&%"6)3$&
+(3$'3$%
You can check the open source licenses of the functions that this
product is equipped with.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)KG=87($:QC973=HC:].
3 Touch [LH97O398($:QC973=HC:].
4 Touch [.H48:48].
4OC@SHMFÐÆQLV@QD
CAUTION
The external storage device for updating must contain only
the correct update file.
Never turn this product off, eject the SD memory card or
disconnect the USB storage device while the firmware is
being updated.
!"#$%&'(')%"*
AE1/0@810//7.?1
V+
You can only update the firmware when the vehicle is
stopped and the handbrake is engaged.
1 Download the firmware update files into your
computer.
2 Connect a blank (formatted) storage device
to your computer, and then locate the correct
update file and copy it onto the storage device.
3 Set the external storage device to this product.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
4 Turn the source off.
Refer to Selecting a source on page 9
5 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
6 Touch [)KG=87($:QC973=HC:].
7 Touch [LH97O398(U;?3=8].
8 Touch [6C:=H:<8] to display the data transfer
mode.
Follow the on-screen instructions to finish updating the
firmware.
p If an error message appears on the screen, touch the display
and perform the above steps again.
@2$3A('1&%$'%")&+$*)'('1&%#*#6%&
*'>&>)(0('1&%#*#6%
You can check the sensor learning status, such as the degree of
learning. You can also check the current sensor values and the
total number of speed pulses.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)KG=87($:QC973=HC:].
3 Touch [^@(63BHT93=HC:()=3=<G].
@+$*)('1&#2$&%#*#6%
You can delete the learned results stored in the sensor.
1 Display the “^@(63BHT93=HC:()=3=<G” screen.
2 Touch [@HG=3:48] or [);88?(1<BG8], and then
touch [*8G].
3 Touch [.839:H:D] and then touch [-8G8=("BB].
p Touch [-8G8=("BB] to reset the sensor after changing the
installation position or angle.
p If you touch [-8G8=(@HG=3:48], all learned results stored in
“@HG=3:48” are cleared.
@2$3A('1&#2$&3"''$3#("'%&"/&
+$*>%
Check that the leads are properly connected between this
product and vehicle.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch [)KG=87($:QC973=HC:].
3 Touch [6C::84=HC:()=3=<G].
%1)(":=8::3
Displays the connection status of the GPS aerial (“'A” or
“!'A”) and the reception sensitivity.
p If reception is poor, please change the installation position
of the GPS aerial.
1CGH=HC:H:D()=3=<G
Displays the positioning status (3D positioning, 2D posi-
tioning, or no positioning), the number of satellites used for
positioning (orange), and the number of satellites whose
signal has been received (yellow). If signals from more than
three satellites are received, the current location can be
measured.
Refer to Positioning technology on page 75
$:G=3BB3=HC:
Indicates whether the installation position of this product
is correct or not. If installed correctly, “'A” appears. When
this product is installed at an extreme angle exceeding
the limitation of the installing angle, “!'A`$:G=R(":DB8a”
will be displayed. If the installation of this product is
continually changed and it is not firmly fixed into place,
“!'A`#HT93=HC:a” will be displayed.
);88?(1<BG8
The speed pulse value detected by this product is shown.
$BB<7H:3=HC:
Displays the status of headlights or small lamps of the
vehicle.
2345()HD:3B
When the gearstick is shifted to “R” (reverse position), the
signal switches to “SHDE” or “.CO”. The signal displayed will
vary depending on the vehicle.
#8EH4B8(2<G(*1)
Displays the status of the vehicle bus adapter.
p (*1) LMM@"2/LMN@"2/LPMN@"2/LPMMN@"2
!"#$%&'(')%"*
AE1/0@810//7.?1
VS
5(%9+*-('1&#2$&U:6>("V&%$##('1&
%3)$$'
1 Press the button.
2 Touch , and then .
=%('1&/*>$)E4*+*'3$&*>76%#,$'#
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [L3?89W23B3:48].
p Only the balance can be adjusted when “':” is selected in
“-839();83589”. Touch [23B3:48] and skip to step 4.
Refer to Setting the rear speaker output on page 63.
3 Touch or to adjust the front/rear speaker
balance.
p Set “L9C:=” and “-839” to “N” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.
You can also set the value by dragging the point
on the displayed table.
<I(#32('1&%"6'>&,6#('1E
*##$'6*#("'
You can automatically mute or attenuate the AV source volume
and the iPhone or smartphone application volume when the
navigation outputs the guidance voice.
The default setting is “"&&”.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [,<=8(.8J8B].
3 Touch the item.
"&&:
The volume becomes 20 dB lower than the current volume.
,<=8:
The volume becomes 0.
'QQ:
The volume does not change.
:>76%#('1&%"6)3$&+$0$+%
)." (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p Settings are based on the FM tuner volume level, which
remains unchanged.
p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
3 Touch [)C<948(.8J8B("?i<G=89].
4 Touch or to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the )." setting will be changed to the value of the touched
point.
p “/f” to “0f” is displayed as the source volume is increased
or decreased.
p The default setting is “N”.
<$##('1&#2$&)$*)&%9$*A$)&"6#96#
A rear speaker output of this product can be turned on or off.
The default setting is “':”.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [-839();83589] to switch “':” or “'QQ”.
p If “'QQ” is selected, the rear speaker adjustment is not availa-
ble in “);83589(.8J8B”, “&H78("BHD:78:=” and “69CGGCJ89”.
<$##('1&#2$&%64I""/$)&"6#96#
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is “':”.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [)<TOCCQ89] to switch “':” or “'QQ”.
p If “'QQ” is selected, the rear speaker adjustment is not availa-
ble in “);83589(.8J8B”, “&H78("BHD:78:=” and “69CGGCJ89”.
:>76%#('1&#2$&36#"//&/)$Q6$'3-&
0*+6$
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
L9C:=, -839, )<TOCCQ89
p “-839” is available only when “-839();83589” is set to “':”.
Refer to Setting the rear speaker output on page 63
p “)<TOCCQ89” is available only when “)<TOCCQ89” is set to
“':”.
Refer to Setting the subwoofer output on page 63
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [69CGGCJ89] or [)<TOCCQ89()8==H:DG].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p The following items can also be set.
⁂⁚⁓⁥⁗:
Switches the subwoofer phase between normal and reverse
position.
.1L/S1L:
Switches the .1L/S1L setting to “':” or “'QQ”.
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.
<$+$3#('1&#2$&+(%#$'('1&9"%(#("'
You can select a listening position that you want to make as the
centre of sound effects.
The default setting is “'QQ”.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [.HG=8:H:D(1CGH=HC:].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
'QQ, L9C:=Z., L9C:=Z-, L9C:=, "BB.
!6C7-85CM61/@0./1
!"#$%&'(')%"*
!6C7-85CM61/@0./1
V&
:>76%#('1&#2$&%9$*A$)&"6#96#&
KDUDKRÐÆMDKX
Fine adjustments of the speaker output level can be made by
listening to audio output.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [);83589(.8J8B].
3 Touch [<] or [>] to select the listening position
if necessary.
The following items are available:
'QQ, L9C:=Z., L9C:=Z-, L9C:=, "BB.
p The default setting is “'QQ”.
p If you change the setting for the listening position, the
output levels of all the speakers will change according to the
setting.
4 Touch [<] or [>] to adjust the speaker output
level.
p “0>f” dB to “dN” dB is displayed as the level to be corrected
is increased or decreased.
The following items are available:
L9C:=(.8Q=, L9C:=(-HDE=, -839(.8Q=, -839(-HDE=, )<TOCCQ89
p If the Auto EQ measurement has been done, the result of the
Auto EQ measurement will be applied by touching [";;BK(
"<=C(+g] (the results are also applied to some settings
simultaneously).
:>76%#('1&#2$&#(,$&*+(1',$'#
By adjusting the distance from each speaker to the listening
position, time alignment is able to correct the time required for
sound to reach the listening position.
1 Measure the distance between the head of the
listener and each speaker unit.
2 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
3 Touch [&H78("BHD:78:=].
4 Touch [<] or [>] to select the listening position
if necessary.
The following items are available:
'QQ, L9C:=Z., L9C:=Z-, L9C:=, "BB.
p The default setting is “'QQ”.
p If you change the listening position setting, the distance
value of all the speakers will change in conjunction with the
setting.
5 Touch [<] or [>] to input the distance between
the selected speaker and the listening position.
The following items are available:
L9C:=(.8Q=, L9C:=(-HDE=, -839(.8Q=, -839(-HDE=, )<TOCCQ89
p You can input the value between 0 cm and 500 cm.
p The distance can be adjusted manually only when the listen-
ing position setting is set to “L9C:=Z.” or “L9C:=Z-”.
p If the Auto EQ measurement has been done, the result of the
Auto EQ measurement will be applied by touching [";;BK(
"<=C(+g] (the results are also applied to some settings
simultaneously).
If you touch [&"(':], the time alignment is turned
off mandatorily.
=%('1&#2$&$Q6*+(%$)
8$3*++('1&$Q6*+(%$)&36)0$%
There are multiple equalizer curves that you can easily recall at
any time. The equalizer curves you can recall are as follows:
)R23GG, 1CO89Q<B, !3=<93B, #C43B, LB3=, 6<G=C7d and 6<G=C7>
p The default setting is “1CO89Q<B”.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [%93;EH4(+g].
3 Touch the equalizer curve name.
@6%#",(%('1&#2$&$Q6*+(%$)&36)0$%
p If the preset equalizer curve other than “6<G=C7d” or
“6<G=C7>” is modified, the equalizer curve settings in
“6<G=C7d” will be overwritten.
p If the equalizer curve stored in “6<G=C7d” or “6<G=C7>” is
modified, each stored curve will be overwritten.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [%93;EH4(+g].
3 Select a curve that you want to use as the basis
of customising.
4 Touch the frequency for which you want to
adjust the level.
p If you touch “6<G=C7d” or “6<G=C7>”, recall the equalizer
curve currently stored in “6<G=C7d” or “6<G=C7>”.
p If you trail a finger across the bars of multiple equaliser
bands, the equaliser curve settings will be set to the value of
the touched point on each bar.
<$##('1&#2$&*6#"G*>76%#$>&$Q6*+(%$)
You can set the auto-adjusted equalizer to suit the vehicle’s
acoustics. To use this function, the Auto EQ measurement must
be done in advance.
Refer to Adjusting the equaliser curve automatically (Auto EQ)
on page 64
The default setting is “'QQ”.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch ["<=C(+gX&"] to switch “':” or “'QQ”.
:>76%#('1&#2$&$Q6*+(%$)&36)0$&
*6#",*#(3*++-&S:6#"&FaT
By measuring the vehicle’s acoustics, the equaliser curve can be
adjusted automatically to suit the vehicle interior.
WARNING
A loud tone (noise) may be emitted from the speakers when
measuring the vehicle’s acoustics. Never perform Auto EQ
measurement while driving.
CAUTION
Thoroughly check the conditions before performing Auto
EQ, as the speakers may be damaged if this is performed
under the following conditions:
— When the speakers are incorrectly connected. (For exam-
ple, when a rear speaker is connected as a subwoofer
output.)
— When a speaker is connected to a power amp delivering
output higher than the speaker’s maximum input power
capability.
If a microphone for acoustical measurement (sold
separately) is not placed in an appropriate location, the
measurement tone may become loud and measurement
may take a long time, resulting in battery drainage. Be sure
to place the microphone in the specified location.
.$/")$&"9$)*#('1&#2$&:6#"&Fa&
/6'3#("'
Perform Auto EQ in as quiet a place as possible, with the
vehicle engine and air conditioning switched off. Also, cut
!"#$%&'(')%"*
!6C7-85CM61/@0./1
VD
power to car phones or mobile phones in the vehicle, or
remove them in advance. Surrounding sounds may prevent
correct measurement of the vehicle’s acoustics.
Be sure to use the microphone for acoustical measurement
(sold separately). Using another microphone may prevent
measurement, or result in incorrect measurement of the
vehicle’s acoustics.
To perform Auto EQ, the front speakers must be connected.
When this product is connected to a power amp with input
level control, Auto EQ may be impossible if the power amp’s
input level is set below the standard level.
When this product is connected to a power amp with an LPF
(low pass filter), turn the LPF off before performing Auto EQ.
Also, set the cut-off frequency for the built-in LPF of an active
subwoofer to the highest frequency.
The distance has been calculated by a computer to provide
optimum delay to ensure accurate results. Do not change
this value.
— The reflected sound within the vehicle is strong and delays
occur.
— The LPF on active subwoofers or external amps delay the
lower sounds.
If an error occurs during measurement, check the following
before measuring the vehicle’s acoustics.
— Front speakers (left/right)
— Rear speakers (left/right)
— Noise
— Microphone for acoustical measurement (sold separately)
— Low battery
B$)/"),('1&:6#"&Fa
CAUTION
Do not turn off the engine while the measurement is in
progress.
p Auto EQ changes the audio settings as follows:
— The fader/balance settings return to the centre position.
Refer to Using fader/balance adjustment on page 63
— “,<=8(.8J8B” is set to “'QQ”.
Refer to Switching sound muting/attenuation on page 63
p Previous settings for Auto EQ will be overwritten.
1 Stop the vehicle in a quiet place, close all the
doors, windows and sun roof, and then turn the
engine off.
If the engine is left running, engine noise may prevent correct
Auto EQ.
p If driving restrictions are detected during measurement,
measurement is cancelled.
2 Fix the microphone for acoustical measurement
(sold separately) in the centre of the headrest
of the driver’s seat, facing forwards.
The Auto EQ may differ depending on where you place the micro-
phone. If desired, place the microphone on the front passenger
seat and perform Auto EQ.
3 Disconnect the iPhone or smartphone device.
4 Turn on the ignition switch (ACC ON).
If the vehicle’s air conditioner or heater is turned on, turn it off.
5 Turn the source off.
Refer to Selecting a source on page 9
6 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
7 Touch ["Z+gX&"(,83G<9878:=].
8 Connect the microphone for acoustical meas-
urement (sold separately) with this product.
F88DAB
F80DAB
Plug the microphone into the auto EQ microphone input jack on
this product.
Refer to Checking part names and functions on page 4
F980DAB
F980BT
Plug the microphone into the AUX input jack on the back panel
of this product.
Refer to the Installation Manual.
p Use an extension cable (sold separately) if the cord of the
Microphone (sold separately) is not long enough.
9 Touch [L9C:=(.8Q=] or [L9C:=(-HDE=] to select the
current listening position.
10 Touch [)=39=].
A 10-second countdown starts.
p The Bluetooth connection is disconnected before the pro-
cess starts.
11 Exit the vehicle and keep the doors closed until
the countdown finishes.
When the countdown finishes, a measurement tone (noise)
is emitted from the speakers and the Auto EQ measurement
begins.
12 Wait until the measurement is completed.
When Auto EQ is completed, a message is displayed.
p The measurement time varies depending on the type of
vehicle.
To stop the measurement, touch [)=C;].
13 Store the microphone carefully in the glove box
or another safe place.
If the microphone is subjected to direct sunlight for an extended
period, high temperatures may cause distortion, colour change
or malfunction.
=%('1&#2$&*6#",*#(3&%"6'>&+$0$+(_$)
During driving, noise in the car changes according to the driving
speed and road conditions. ASL (automatic sound levelizer)
monitors such varying noise and automatically increases the
volume level, if this noise becomes greater. The sensitivity
(variation of volume level to noise level) of ASL can be set to one
of five levels.
1 Display the “"<?HC” setting screen.
Refer to Displaying the “"<?HC” setting screen on page 63
2 Touch [").].
3 Touch the desired level.
!"#$%&'(')%"*
!6C7-85CM61/@0./1
VV
5(%9+*-('1&#2$&U?2$,$V&%$##('1&
%3)$$'
1 Press the button.
2 Touch , and then .
<$+$3#('1&#2$&I*++9*9$)
The wallpaper can be selected from some preset items.
Furthermore, you can set your original pictures.
1 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
2 Touch [2345D9C<:?].
3 Touch [SC78] or ["#] to switch the screen
displays.
The setting contents can be memorized separately for the AV
operation screen and the top menu screen.
4 Touch the item.
Preset displays: Selects the desired preset background
display.
(custom): Displays the background display image
imported from the external storage device.
Refer to Changing to the wallpaper stored on the external
storage device on page 66
(off): Hides the background display.
@2*'1('1&#"&#2$&I*++9*9$)&%#")$>&"'&
#2$&$Z#$)'*+&%#")*1$&>$0(3$
CAUTION
Do not turn off the engine while importing an image from the
external storage device.
p Background display image must be used within the follow-
ing formats.
— JPEG image files (.jpg or .jpeg)
— Allowable data size is 10 MB or smaller
— Allowable image size is 4 000 pixels × 4 000 pixels or
smaller
1 Set the external storage device.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
2 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
3 Touch [2345D9C<:?].
4 Touch .
5 Touch the desired external storage device.
6 Touch the image.
<$##('1&#2$&(++6,('*#("'&3"+"6)
The illumination colour can be selected from some preset colors.
Furthermore, the illumination can be switched between these
colors in order.
<$+$3#('1&#2$&3"+"6)&/)",&#2$&9)$%$#&
3"+"6)%
You can select an illumination colour from the colour list.
1 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
2 Touch [$BB<7H:3=HC:].
3 Touch the colour.
Coloured keys: Selects the desired preset colour.
(custom): Displays the screen to customise the illumina-
tion colour.
Refer to Creating a user-defined colour on page 66
(rainbow): Shifts gradually between the preset colors in
sequence.
"QD@SHMFÐ@ÐTRDQCDÆMDCÐBNKNTQ
You can create a user-defined colour. The created colour is
stored, and you can select the colour when setting the illumina-
tion colour the next time.
1 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
2 Touch [$BB<7H:3=HC:].
3 Touch .
4 Drag the colour bar to adjust the colour tone.
You can also adjust the colour tone by touching
or .
5 Touch and hold [,87C] to store the custom-
ised colour in the memory.
The customised colour is stored in the memory.
The set colour will be recalled from the memory the next time
you touch the same key.
<$+$3#('1&#2$&#2$,$&3"+"6)
1 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
2 Touch [&E878].
3 Touch the colour.
You can preview the top menu screen or the AV
operation screen by touching [SC78] or ["#]
respectively.
<$+$3#('1&#2$&%#-+$&"/&#2$&3+"3A
1 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
2 Touch [6BC45].
3 Touch the item.
Preset images: Selects the desired preset style for the clock.
(off): Hides the clock display.
@2*'1('1&#2$&9)$('%#*++$>&
%9+*%2&%3)$$'
You can change the splash screen to other images preinstalled
in this product.
1 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
2 Touch [);B3GE()4988:].
3 Touch the item.
Preset images: Selects the desired preset splash screen
image.
(custom): Displays the splash screen image imported
from the external storage device.
Refer to Changing to the splash screen stored on the external
storage device on page 67
,<0@08@0.6
!"#$%&'(')%"*
,<0@08@0.6
VJ
@2*'1('1&#"&#2$&%9+*%2&%3)$$'&%#")$>&
"'&#2$&$Z#$)'*+&%#")*1$&>$0(3$
CAUTION
Do not turn off the engine while importing an image from the
external storage device.
1 Set the external storage device.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
2 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
3 Touch [);B3GE()4988:].
4 Touch .
5 Touch the desired external storage device.
6 Touch the image.
8$9+(3*#('1&#2$&%$##('1%
You can export settings you have made on the “&E878” screen
to an external storage device. Also, you can import them from an
external storage device.
CAUTION
Do not turn off the engine while exporting or importing the
settings.
p If multiple external storage devices that include available
data are connected to this product, the order of priority for
the targets that the “&E878” settings are exported to or
imported from is as follows:
F88DAB
F80DAB
1 SD memory card
2 USB storage device (USB port 1)
3 USB storage device (USB port 2)
F980DAB
F980BT
1 USB storage device (USB port 1)
2 USB storage device (USB port 2)
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
FZ9")#('1&U?2$,$V&%$##('1%
1 Set the external storage device.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
2 Display the “&E878” screen.
Refer to Displaying the “&E878” setting screen on page 66
3 Touch [+I;C9=].
4 Touch the item you want to export.
The following items are available:
$BB<7H:3=HC:, &E878, );B3GE()4988:, )8B84=("BB
5 Touch [+I;C9=].
D,9")#('1&U?2$,$V&%$##('1%
1 Set the external storage device.
Refer to Inserting and ejecting an SD memory card on page
6
Refer to Plugging and unplugging a USB storage device on
page 6
A message confirming whether to import the stored setting data
appears.
2 Touch [$7;C9=].
<$##('1&69&#2$&0(>$"&9+*-$)
This setting is available only when “@HG4” is selected as the
source.
5(%9+*-('1&#2$&U5J5E5(0`&<$#69V&
%3)$$'
1 Press the button.
2 Touch , and then .
3 Touch [@#@W@HJj()8=<;].
<$##('1&#2$&#"9G9)(")(#-&+*'16*1$%
You can assign the top-priority language to the top-priority subti-
tle, audio and menu in initial playback. If the selected language
is recorded on the disc, subtitles, audio and menu are displayed
or output in that language.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [)<T=H=B8(.3:D<3D8], ["<?HC(.3:D<3D8]
or [,8:<(.3:D<3D8].
3 Touch the desired language.
When you select “'=E89G”, a language code input screen is
shown. Input the four-digit code of the desired language then
touch .
p You can switch the language by touching the switch lan-
guages key during playback.
p The setting made here will not be affected even if the lan-
guage is switched during playback using the appropriate
key.
<$##('1&#2$&*'1+$&(3"'&>(%9+*-
The angle icon can be set so it appears on scenes where the
angle can be switched.
The default setting is “':”.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [,<B=H(":DB8] to switch “':” or “'QQ”.
"7C0-810//7.?1
!"#$%&'(')%"*
,<0@08@0.6 "7C0-810//7.?1
V'
<$##('1&#2$&*%9$3#&)*#("
There are two kinds of displays. A wide screen display has a
width-to-height ratio (TV aspect) of 16:9, while a regular display
has a TV aspect of 4:3. If you use a regular rear display with a TV
aspect of 4:3, you can set the aspect ratio suitable for your rear
display. (We recommend use of this function only when you want
to fit the aspect ratio to the rear display.)
The default setting is “de[P”.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [&#("G;84=].
3 Touch the item.
de[P: Displays the wide screen image (16:9) as it is (initial
setting).
.8==89(2CI: Makes the image in the shape of a letterbox with
black bands on the top and bottom of the screen.
13:()43:: Cuts the image short on the right and left sides of
the screen.
p When playing discs that do not have a panscan system, the
disc is played back with “.8==89(2CI” even if you select the
“13:()43:” setting. Confirm whether the disc package bears
the mark.
p The TV aspect ratio cannot be changed for some discs. For
details, refer to the disc’s instructions.
<$##('1&9*)$'#*+&+"3A
Some DVD-Video discs let you use parental lock to set restric-
tions so that children cannot watch violent or adult-oriented
scenes. You can set the parental lock level in steps as desired.
p When you set a parental lock level and then play a disc fea-
turing parental lock, code number input indications may be
displayed. In this case, playback will begin when the correct
code number is input.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [1398:=3B].
3 Touch [N] to [P] to input a four-digit code
number.
4 Touch .
5 Touch any number between [d] to [M] to select
the desired level.
p The lower the level is set, the tighter the restriction is
applied.
p The default setting is “M”.
6 Touch .
p We recommend to keep a record of your code number in
case you forget it.
p The parental lock level is recorded on the disc. You can con-
firm it by looking at the disc package, the included literature
or the disc itself. You cannot use parental lock with discs that
do not feature a recorded parental lock level.
p With some discs, parental lock operates to skip certain
scenes only, after which normal playback resumes. For
details, refer to the disc’s instructions.
5(%9+*-('1&-"6)&5(0`&JK5&)$1(%#)*G
#("'&3">$
If you want to play DivX® VOD (video on demand) content on this
product, you must first register this product with your DivX VOD
content provider. You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
p Keep a record of the code as you will need it when you
register this product to the DivX VOD provider.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [@HJjk(#'@].
p If a registration code has already been activated, it cannot be
displayed.
3 Touch [-8DHG=93=HC:(6C?8].
Your 10-digit registration code is displayed.
p Make a note of the code as you will need it when you deregis-
ter from a DivX VOD provider.
5(%9+*-('1&-"6)&5(0`&JK5&>$)$1(%#)*G
#("'&3">$
A registration code registered with a deregistration code can
be deleted.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [@HJjk(#'@].
3 Touch [@898DHG=93=HC:(6C?8].
Your 8-digit deregistration code is displayed.
p Make a note of the code as you will need it when you deregis-
ter from a DivX VOD provider.
:6#",*#(3&9+*-4*3A&"/&5J5%
When a DVD disc with a DVD menu is inserted, this product will
cancel the menu automatically and start playback from the first
chapter of the first title.
The default setting is “'QQ”.
p Some DVDs may not operate properly. If this function is not
fully operable, turn this function off and start playback.
1 Display the “@#@W@HJj()8=<;” screen
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [@#@("<=C(1B3K] to switch “':” or “'QQ”.
<$##('1&#2$&0(>$"&%(1'*+&/")&#2$&
)$*)&0($I&3*,$)*
When you connect a rear view camera to this product, select the
suitable video signal setting.
The default setting is “"<=C”.
p You can operate this function only for the video signal input
into the AV input.
1 Display the “#H?8C()8=<;” screen.
2 Touch [#H?8C()HD:3B()8==H:D].
3 Touch [637893].
4 Touch the item.
The following items are available:
"<=C, 1"., !&)6, 1".Z,, 1".Z!, )+6",.
!"#$%&'(')%"*
"7C0-810//7.?1
VO
<$##('1&#2$&0(>$"&"6#96#&
/"),*#
You can switch the video output format of the rear display
between PAL and NTSC.
The default setting is “1".”.
p The video output format setting has no effect on “"Uj”,
“"#”, and “H1C?” sources (when the control mode is set to
iPod).
p This function is available when “)C<948('LL” is selected on
the AV source, and a source for the rear display other than
“@HG4”, “U)2d”, “U)2>”, and “)@” is selected.
1 Display the “@#@W@HJj()8=<;” screen.
Refer to Displaying the “@#@W@HJj()8=<;” screen on page
67
2 Touch [#H?8C('<=;<=(LC973=] to switch “1".”
or “!&)6”.
Registering your favourite menu items in shortcuts allows you to
quickly jump to the registered menu screen by a simple touch on
the “L3JC9H=8G” screen.
p Up to 12 menu items can be registered in the favourite
menu.
@)$*#('1&*&%2")#36#
1 Display the setting menu screen.
2 Touch the star icon of the menu item.
The star icon for the selected menu is filled in.
To cancel the registration, touch the star icon in
the menu column again.
<$+$3#('1&*&%2")#36#
1 Display the “L3JC9H=8G” screen.
2 Touch the menu item.
8$,"0('1&*&%2")#36#
1 Display the “L3JC9H=8G” screen.
2 Touch the favourite menu column.
The selected menu item is removed from the “L3JC9H=8G” screen.
You can also remove a shortcut by touching the
registered menu column.
p In the favourite menu, “&"($:=899<;=” under “-3?HC(
)8==H:DG” and “@"2()8==H:DG” are managed as the same
item.
<$##('1&#2$&#(,$&*'>&>*#$
1 Touch the current time on the screen.
2 Touch one of the items to adjust.
p You can change the time display format to “d>EC<9” (default)
or “>fEC<9”.
p You can change the order of date display format: Day-month,
Month-day.
<$##('1&#2$&U<"6'>&8$#)($0$)V&
/6'3#("'
The “)C<:?(-8=9H8J89” function automatically enhances com-
pressed audio and restores rich sound.
The default setting is “Mode1”.
1 Touch to switch the settings.
(Mode1), (Mode2): Activates the “)C<:?(
-8=9H8J89” function.
p Mode2 has a stronger effect than Mode1.
(Off): Deactivates the “)C<:?(-8=9H8J89” function.
@2*'1('1&#2$&I(>$&%3)$$'&
,">$
The default setting is “L<BB”, and for JPEG images is “!C973B”.
p JPEG can be set to either “!C973B” or “&9H77H:D” in wide
screen mode.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Touch the following key.
&5>-637/08@0.6N/<038B6.4/7-.1
!"#$%&'(')%"*
"7C0-810//7.?1 &5>-637/08@0.6 N/<038B6.4/7-.1
JZ
2 Touch the desired mode.
L<BB:
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
_CC7:
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.
!C973B:
A 4:3 picture is displayed normally, without changing its
proportion.
&9H77H:D
An image is displayed across the entire screen with the
horizontal-to-vertical ratio left as is. If the screen ratio differs
from the image, the image may be displayed partly cut off
either at the top/bottom or sides.
p Different settings can be stored for each video source.
p When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p The video image will appear coarser when viewed in “_CC7”
mode.
<#")('1&%"'1&('/"),*#("'&#"&*'&
(B">&S(?6'$%®&?*11('1T
You can store song information to the iPod when this product
receives song information. The songs will appear in a playlist
called “Tagged playlist” in iTunes the next time you synchronize
your iPod. You can directly buy the songs via iTunes.
p The iTunes® Tagging function is available when the song
information is available.
p This function is available for the following iPod models:
iPhone 3G, 3GS, 4, 4s
iPod touch 1st, 2nd, 3rd, 4th generation
iPod classic 1st, 2nd generation
p The version of iTunes must be 7.4 or higher.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch ["#()C<948()8==H:DG].
3 Touch [&3D(LC9O39?H:D] to select the USB port
you use.
4 Tune into the broadcast station.
Refer to Radio on page 37
5 Touch the song information.
The information on the song on air is stored in this product.
When the information is acquired, turns off and is
displayed.
p The song information for up to 50 songs can be stored in this
product.
6 Connect your iPod.
The song information is transferred to your iPod.
p When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch
the song information.
<$+$3#('1&#2$&0(>$"&/")&#2$&)$*)&
>(%9+*-
You can choose either to show the same image as the front
screen or to show the selected source on the rear display.
p Video files on the external storage device are not available as
a source for the rear display when [";;B8(6391B3K] is acti-
vated in [)739=;EC:8()8=<;].
LMM@"2/LMN@"2
p Video files on the external storage device are not available as
a source for the rear display when [":?9CH?("<=C] is acti-
vated in [)739=;EC:8()8=<;].
1 Display the AV source selection screen.
2 Touch [-839].
3 Touch the source you want to show on the rear
display.
,H99C9
The video on the front screen of this product is output to the
rear display.
— Not all videos or sounds can be output to the rear display.
@#@W6@
The video and sound of a disc are output to the rear display.
— Compatible video types are DVD-V, Video-CD, DivX, MPEG-
1, MPEG-2, and MPEG-4 only.
U)2WH1C?d
The video and sound of the USB storage device or iPod are
output to the rear display.
— The port that supports the rear display will only be USB
port 1.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.
)@ (*1)
The video and sound of the SD memory cards are output to
the rear display.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.
"#
The video and/or sound of the AV input source are output to
the rear display.
— The video image and sound are output only when “"#(
$:;<=” is set to “)C<948”.
Refer to Starting procedure (for AV source) on page 55.
)C<948('LL
Nothing is output to the rear display.
p (*1) LMM@"2/LMN@"2
<$##('1&#2$&*'#(G#2$/#&/6'3#("'
You can set a password for this product. If the back-up lead is cut
after the password is set, this product prompts for the password
at the time of next boot up.
Important
If you forgot your password, contact the nearest authorized
Pioneer Service Station.
<$##('1&#2$&9*%%I")>
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch
1
, followed by
2
, and then touch and
hold
3
.
!"#$%&'(')%"*
N/<038B6.4/7-.1
J(
123
3 Touch [)8=(13GGOC9?].
4 Enter the password.
p 5 to 16 characters can be entered for a password.
5 Touch [%C].
6 Enter a password hint.
p Up to 40 characters can be entered for a hint.
7 Touch [%C].
p If you want to change the password currently set, enter the
current password and then enter the new one.
8 Check the password, and then touch ['A].
5$+$#('1&#2$&9*%%I")>
The current password and password hint can be deleted.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch
1
, followed by
2
, and then touch and
hold
3
.
Refer to Setting the password on page 70.
3 Touch [6B839(13GGOC9?].
4 Touch [*8G].
5 Touch ['A].
6 Enter the current password.
7 Touch [%C].
A message indicating that the security setting is cancelled
appears.
8$%#")('1&#2(%&9)">63#&#"&#2$&
>$/*6+#&%$##('1%
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
p Some of the settings and recorded contents will not be reset.
Method 2: Restore the default settings from the
“System” menu
Refer to Restoring the default settings on page 71.
Method 3: Press the RESET button
Refer to Resetting the microprocessor on page 4
p Some of the settings and recorded contents will not be reset.
8$%#")('1&#2$&>$/*6+#&%$##('1%
CAUTION
Do not turn off the engine while restoring the settings.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “)KG=87” setting screen.
Refer to Displaying the “)KG=87” setting screen on page
58
2 Touch ["#()C<948()8==H:DG].
3 Touch [-8G=C98()8==H:DG].
A message confirming whether to initialise the settings appears.
4 Touch the item you want to initialise.
"BB()8==H:DG
Almost all settings or recorded content returns to the
default.
"<?HC()8==H:DG
p This setting is available when the source is turned off.
&E878()8==H:DG
2B<8=CC=E()8==H:DG
5 Touch [-8G=C98].
?)"64+$%2""#('1
If you have problems operating this product, refer to this section.
The most common problems are listed below, along with likely
causes and solutions. If a solution to your problem cannot
be found here, contact your dealer or the nearest authorised
Pioneer service facility.
@",,"'&9)"4+$,%
A black screen is displayed, and operation is not possible
using the touch panel keys.
A “1CO89('LL” mode is on.
— Press any button on this product to release the mode.
A The rear view camera image is displayed with no camera
connection and the wrong camera polarity setting.
— Press and hold the ,"1 button to release the rear view
camera screen and then change the camera polarity
setting to “23==89K”.
B)"4+$,%&I(#2&#2$&:J&%3)$$'
CD or DVD playback is not possible.
A The disc is inserted upside down.
— Insert the disc with the label upward.
A The disc is dirty.
— Clean the disc.
A The disc is cracked or otherwise damaged.
— Insert a normal, round disc.
A The files on the disc are in an irregular file format.
— Check the file format.
A The disc format cannot be played back.
— Replace the disc.
A The loaded disc is a type this product cannot play.
— Check what type of disc it is.
The screen is covered by a caution message and the video
cannot be shown.
A The handbrake lead is not connected or the handbrake is not
applied.
— Connect the handbrake lead correctly, and apply the
handbrake.
A The handbrake interlock is activated.
— Park your vehicle in a safe place and apply the handbrake.
No video output from the connected equipment.
A The “"#($:;<=” or “"Uj($:;<=” setting is incorrect.
— Correct the settings.
The audio or video skips.
A This product is not firmly secured.
— Secure this product firmly.
!990.C7O
!"#$%&'(')%"*
N/<038B6.4/7-.1 !990.C7O
J+
No sounds are produced. The volume level will not rise.
A Cables are not connected correctly.
— Connect the cables correctly.
A The system is performing still, slow motion, or frame-by-
frame playback with DVD-Video.
— There is no sound during still, slow motion, or frame-by-
frame playback with DVD-Video.
A The system is paused or performing fast reverse or forwards
during the disc playback.
— For the media other than music CD (CD-DA), there is no
sound on fast reverse or forwards.
The icon is displayed, and operation is impossible.
A The operation is not compatible with the video configuration.
— The operation is not possible. (For example, the DVD
playing does not feature that angle, audio system, subtitle
language, etc.)
The picture stops (pauses) and this product cannot be
operated.
A The reading of data is impossible during disc playback.
— Stop playback once, then restart.
The picture is stretched, with an incorrect aspect ratio.
A The aspect setting is incorrect for the display.
— Select the appropriate setting for that image.
A parental lock message is displayed and DVD playback
is not possible.
A The parental lock is on.
— Turn the parental lock off or change the level.
The parental lock for DVD playback cannot be cancelled.
A The code number is incorrect.
— Input the correct code number.
The DVD video is not played back with the audio/subtitle
language specified in “@#@W@HJj()8=<;”.
A The DVD does not support the language selected in “@#@W
@HJj()8=<;”.
— Playback in the selected language is not possible if the
language selected in “@#@W@HJj()8=<;” is not recorded
on the disc.
The picture is extremely unclear/distorted and dark during
playback.
A The disc features a signal to prohibit copying. (Some discs
may have this.)
— Since this product is compatible with the copy guard
analogue copy protect system, the picture may suffer from
horizontal stripes or other imperfections when a disc with
that kind of protection signal is viewed on some displays.
This is not a malfunction.
iPod cannot be operated.
A The iPod is frozen.
— Reconnect the iPod with the USB interface cable for iPod /
iPhone.
— Update the iPod software version.
A An error has occurred.
— Reconnect the iPod with the USB interface cable for iPod /
iPhone.
— Park your vehicle in a safe place, and then turn off the
ignition switch (ACC OFF). Subsequently, turn the ignition
switch to on (ACC ON) again.
— Update the iPod software version.
A Cables are not connected correctly.
— Connect the cables correctly.
Sound from the iPod cannot be heard.
A The audio output direction may switch automatically when
the Bluetooth and USB connections are used at the same
time.
— Use the iPod to change the audio output direction.
B)"4+$,%&I(#2&#2$&92"'$&%3)$$'
Dialling is impossible because the touch panel keys for
dialling are inactive.
A Your phone is out of range for service.
— Retry after re-entering the range for service.
A The connection between the mobile phone and this product
cannot be established.
— Perform the connection process.
B)"4+$,%&I(#2&#2$&:99+(3*#("'&%3)$$'
A black screen is displayed.
A While operating an application, the application was ended
on the smartphone side.
— Press the button to display the top menu screen.
A The smartphone OS may be awaiting screen operation.
— Stop the vehicle in a safe place and check the screen on
the smartphone.
The screen is displayed, but operation does not work at all.
A An error has occurred.
— Park your vehicle in a safe place, and then turn off the
ignition switch (ACC OFF). Subsequently, turn the ignition
switch to on (ACC ON) again.
— When an Android device is connected, disconnect the
Bluetooth connection from this product and then recon-
nect it.
The smartphone was not charged.
A Charging stopped because the temperature of the smart-
phone rose due to prolonged use of the smartphone during
charging.
— Disconnect the smartphone from the cable, and wait until
the smartphone cools down.
A More battery power was consumed than was gained from
charging.
— This problem may be resolved by stopping any unneces-
sary services on the smartphone.
The status of the vehicle for the forwards and backwards
directions are reversed.
A Since part of the vehicle status is sent to the connected
device when you use the ":?9CH?("<=C function, this
problem occurs when the reverse gear polarity setting of this
product is incorrect.
— Check the polarity and re-select the correct setting.
F))")&,$%%*1$%
When problems occur with this product, an error message
appears on the display. Refer to the table below to identify the
problem, then take the suggested corrective action. If the error
persists, record the error message and contact your dealer or
your nearest Pioneer service centre.
@",,"'
",1(+99C9
A This product fails to operate or the speaker connection is
incorrect; the protective circuit is activated.
— Check the speaker connection. If the message fails to
disappear even after the engine is switched off/on, contact
your dealer or an authorised Pioneer Service Station for
assistance.
&+,1
A The temperature of this product is outside the normal operat-
ing range.
— Wait until this product returns to a temperature within the
normal operating limits.
19C?<4=(CJ89E83=l(LC9(;9C=84=HC:(=E8()KG=87(OHBB(GE<=(?CO:(
3<=C73=H43BBK(H:(1 m H:<=8R(-8Z4K4B8(=E8(HD:H=HC:(=C(98G=39=(
=E8(;9C?<4=($Q(=EHG(78GG3D8(588;G(GECOH:Dl(;B83G8(4C:=34=(
KC<9(?83B89(C9(BC43B(G89JH48(48:=98
A The temperature is too high for this product to operate.
— Follow the instructions displayed on the screen. If this
does not solve the problem, contact your dealer or an
authorised Pioneer Station for assistance.
!"#$%&'(')%"*
!990.C7O
JS
1CGH=HC:H:D(HG(:C=(;CGGHTB8(?<8(=C(E39?O398(899C9R(1B83G8(
4C:G<B=(KC<9(?83B89(C9(BC43B(3<=EC9HG8?(G89JH48(48:=98R
A The location display is not possible due to hardware failure.
— Contact your dealer or an authorised Pioneer Station for
assistance.
!C(%1)(3:=8::3R(6E845(4C::84=HC:R
A GPS reception is lost.
— Check the aerial connection. If the message fails to disap-
pear even after the engine is switched off/on, contact your
dealer or an authorised Pioneer Station for assistance.
%1)(3:=8::3(;9CTB87(?8=84=8?R(6C:=34=(?83B89(C9(G89JH48(
48:=89R
A GPS aerial lead is short-circuited.
— Contact your dealer or an authorised Pioneer Station for
assistance.
63BHT93=HC:(OHBB(G=39=l(T<=(73K(T8(H:344<93=8(OH=EC<=(G;88?(
;<BG8R
A The speed pulse sensor is not connected correctly.
— Contact your dealer or an authorised Pioneer Station for
assistance.
)8:GC9(899C9R(1B83G8(4C:=34=(KC<9(?83B89(C9(1HC:889()89JH48(
68:=89R
A An error has occurred with the sensor.
— Contact your dealer or an authorised Pioneer Station for
assistance.
@8=84=8?(<:<G<3B(G;88?(;<BG8GR
A The speed pulse cannot be detected correctly.
— Contact your dealer or an authorised Pioneer Station for
assistance.
@8=84=8?(4E3:D8G(H:(=E8(H:G=3BB3=HC:(3:DB8(C9(;CGH=HC:R(&E8(
H:Z?3GE(9848HJ89(HG(<;?3=H:D(=E8(G8:GC9(B839:H:D(?3=3R
A Changes in the installation angle or position are detected.
— Wait until the sensor learning finishes.
);88?(;<BG8(OH98(HG(:C=(4C::84=8?R(&E8(GKG=87(OHBB(C;893=8(
H:(GH7;B8(EKT9H?(7C?8R
A Speed pulse wire is not connected.
— The speed pulse cannot be detected if the speed pulse
wire is not connected correctly.
5:.&#6'$)
6E845(":=8::3
A The aerial connection is incorrect.
— Check the aerial connection. If the message fails to disap-
pear even after the engine is switched off/on, contact your
dealer or the nearest authorised Pioneer service centre for
assistance.
5(%3
+99C9ZN>ZjjWLLZLL
A The disc is dirty.
— Clean the disc.
A The disc is scratched.
— Replace the disc.
A The disc is loaded upside down.
— Check that the disc is loaded correctly.
A There is an electrical or mechanical error.
— Press the -+)+& button.
@HQQ898:=(-8DHC:(@HG4
A The disc does not have the same region number as this
product.
— Replace the DVD with one bearing the correct region
number.
U:;B3K3TB8(@HG4
A This type of disc cannot be played on this product.
— Replace the disc with one that can be played on this
product.
U:;B3K3TB8(LHB8
A This type of file cannot be played on this product.
— Select a file that can be played.
)5H;;8?
A The inserted disc contains DRM protected files.
— The protected files are skipped.
19C=84=
A All the files on the inserted disc are embedded with DRM.
— Replace the disc.
&EHG(@HJj(98:=3B(E3G(8I;H98?R
A The inserted disc contains expired DivX VOD content.
— Select a file that can be played.
#H?8C(98GCB<=HC:(:C=(G<;;C9=8?
A Files that cannot be played on this product are included in
the file.
— Select a file that can be played.
4M@AKDÄSNÄVQHSDÄSNÄØ@RGÄLDLNQX
A The playback history for VOD contents cannot be saved for
some reason.
— Retry.
— If the message appears frequently, consult your dealer.
8NTQÄCDUHBDÄHRÄMNSÄ@TSGNQHYDCÄSNÄOK@XÄSGHRÄ#HU7ÄOQNSDBSDCÄ
JH?8CR
A This product’s DivX registration code has not been author-
ised by the DivX VOD contents provider.
— Register this product to the DivX VOD contents provider.
#H?8C(Q9378(93=8(:C=(G<;;C9=8?
A DivX file’s frame rate is more than 30 fps .
— Select a file that can be played.
"<?HC(LC973=(:C=(G<;;C9=8?
A This type of file is not supported on this product.
— Select a file that can be played.
FZ#$)'*+&%#")*1$&>$0(3$&S=<.N&<5T
+99C9ZN>ZPjWZ@j
A Communication failed.
— Turn the ignition switch OFF and back ON.
— Disconnect the USB storage device.
— Change to a different source. Then, return to the USB
storage device.
U:;B3K3TB8(LHB8
A This type of file cannot be played on this product.
— Select a file that can be played.
A Security for the connected external storage device (USB, SD)
is enabled.
— Follow the external storage device (USB, SD) instructions
to disable security.
)5H;;8?
A The connected external storage device (USB, SD) contains
DRM protected files.
— The protected files are skipped.
19C=84=
A All the files on the connected external storage device (USB,
SD) are embedded with DRM.
— Replace the external storage device (USB, SD).
$:4C7;3=HTB8(U)2
A The connected USB storage device is not supported by this
product.
— Disconnect your device and replace it with a compatible
USB storage device.
$:4C7;3=HTB8()@
A The SD memory card is not supported by this product.
— Remove your device and replace it with a compatible SD
memory card.
— Format the SD memory card. It is recommended that you
use SD Formatter for formatting SD memory cards.
!"#$%&'(')%"*
!990.C7O
J&
6E845(U)2
A The USB connector or USB cable has short-circuited.
— Check that the USB connector or USB cable is not caught
in something or damaged.
A The connected USB storage device consumes more than
maximum allowable current.
— Disconnect the USB storage device and do not use it. Turn
the ignition switch to OFF, then to ACC or ON and then
connect a compliant USB storage device.
SU2(+99C9
A The connected USB hub is not supported by this product.
— Directly connect the USB storage device to this product.
!C(-8G;C:G8
A This product cannot recognise the connected USB storage
device.
— Disconnect the device and replace it with another USB
storage device.
#H?8C(98GCB<=HC:(:C=(G<;;C9=8?
A Files that cannot be played on this product are included in
the file.
— Select a file that can be played.
U)2d(O3G(?HG4C::84=8?(QC9(?8JH48(;9C=84=HC:R(@C(:C=(98ZH:Z
G89=(=EHG(U)2(787C9K(H:=C(=E8(<:H=R(198GG(98G8=(=C(98G=39=(
U)2(787C9KR
(U)2>(O3G(?HG4C::84=8?(QC9(?8JH48(;9C=84=HC:R(@C(:C=(98ZH:Z
G89=(=EHG(U)2(787C9K(H:=C(=E8(<:H=R(198GG(98G8=(=C(98G=39=(
U)2(787C9KR)
A The USB connector or USB cable is short-circuited.
— Check that the USB connector or USB cable is not caught
in something or damaged.
A The connected USB storage device consumes more than
maximum allowable current.
— Disconnect the USB storage device and do not use it. Turn
the ignition switch to OFF, then to ACC or ON and then
connect a compliant USB storage device.
A The USB interface cable for iPod / iPhone is short-circuited.
— Confirm that the USB interface cable for iPod / iPhone or
USB cable is not caught in something or damaged.
"<?HC(LC973=(:C=(G<;;C9=8?
A This type of file is not supported on this product.
— Select a file that can be played.
(B">
+99C9ZN>ZejWZPjWZ@j
A iPod failure.
— Disconnect the cable from the iPod. Once the iPod’s main
menu is displayed, reconnect the iPod and reset it.
+99C9ZN>Zem
A The iPod firmware version is old.
— Update the iPod version.
(?6'$%&#*11('1
+99C9ZM@
A Built-in FLASH ROM encountered an error.
— Turn the ignition switch to OFF and then to ON.
&3D(G=C98(Q3HB8?R
A Tag information cannot be stored in this product.
— Tr y again.
"B983?K(G=C98?R
A This tag information is already stored in memory.
— Tag information can only be saved once for any given
song. Tag information cannot be saved for the same song
more than once.
,87C9K(Q<BBR(6C::84=(H1C?R
A The tag information is successfully stored. The flash memory
of this product has become full.
— The tag information on this product is transferred to the
iPod automatically when an iPod is connected.
,87C9K(Q<BBR(&3DG(:C=(G=C98?R(6C::84=(H1C?R
A This product’s flash memory used as the temporary storage
area is full.
— The tag information on this product is transferred to the
iPod automatically when an iPod is connected.
H1C?(Q<BBR(&3DG(:C=(=93:GQ8998?R
A Memory used for tag information on the iPod is full.
— Synchronize the iPod with iTunes and clean up the tagged
playlist.
&3D(=93:GQ89(Q3HB8?R(-84C::84=(KC<9(H1C?R
A This product’s tag information cannot transfer to the iPod.
— Check the iPod and try again.
:99+$&@*)B+*-
Attempting to connect to Apple CarPlay.
A Communication failed and the system is trying to connect.
A Wait for a while. Then, perform the actions below if the error
message is still displayed.
— Restart the iPhone.
— Disconnect the cable from the iPhone, and then connect
the iPhone again after a few seconds.
— Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
.+6$#""#2
+99C9ZdN
A The power failed for the Bluetooth module of this product.
— Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
!"#$%&'(')%"*
!990.C7O
JD
:'>)"(>&:6#"
":?9CH?("<=C(E3G(G=C;;8?R
A The connected device is not compatible with ":?9CH?("<=C.
— Check if the device is compatible with ":?9CH?("<=C.
A The startup of ":?9CH?("<=C failed for some reasons.
— Disconnect the cable from the smartphone, and then
connect the smartphone again after a few seconds.
— Restart the smartphone.
— Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
A The time set in this product is not correct.
— Check if GPS signals are received and the time is correctly
set.
2B<8=CC=E(;3H9H:D(Q3HB8?R(1B83G8(;3H9(KC<9(":?9CH?(;EC:8(
73:<3BBKR
A The Bluetooth pairing failed for some reasons.
— Pair this product with the device manually.
":?9CH?("<=C(43::C=(4C::84=(9HDE=(:COR(FE8:(G3Q8(=C(?C(
GCl(;B83G8(4E845(KC<9(":?9CH?(;EC:8R
A The default settings are displayed on the screen of the
Android Auto-compatible device or images are not output
from the Android Auto-compatible device.
— Park your vehicle in a safe place, and follow the instruc-
tions displayed on the screen. If the error message is
still displayed after performing a on-screen instructions,
please reconnect the device.
B"%(#("'('1&#$32'"+"1-
B"%(#("'('1&4-&XB<
The Global Positioning System (GPS) uses a network of satellites
orbiting the Earth. Each of the satellites, which orbit at a height
of 68 900 000 feet (21 000 km), continually broadcasts radio
signals giving time and position information. This ensures that
signals from at least three can be picked up from any open area
on the earth’s surface.
The accuracy of the GPS information depends on how good the
reception is. When the signals are strong and reception is good,
GPS can determine latitude, longitude and altitude for accurate
positioning in three dimensions. But if signal quality is poor, only
two dimensions, latitude and longitude, can be obtained and
positioning errors are somewhat greater.
B"%(#("'('1&4-&>$*>&)$3A"'('1
The built-in sensor in the navigation system also calculates your
position. The current location is measured by detecting driving
distance with the speed pulse, the turning direction with the gyro
sensor and inclination of the road with the G sensor.
The built-in sensor can even calculate changes of altitude, and
correct the discrepancies in the distance travelled caused by
driving along winding roads or up slopes.
If you use this navigation system with connecting the speed
pulse, the system will become more accurate than no connec-
tion of speed pulse. So you connect the speed pulse without fail
to get the accuracy of positioning.
p The position of the speed detection circuit vary depending
on the vehicle model. For details, consult your authorised
Pioneer dealer or an installation professional.
p Some types of vehicles may not output a speed signal while
driving at just a few kilometres per hour. In such a case, the
current location of your vehicle may not be displayed cor-
rectly while in traffic jam or in a car park.
H"I&>"&XB<&*'>&>$*>&)$3A"'('1&
I")A&#"1$#2$)\
For maximum accuracy, your navigation system continually com-
pares GPS data with your estimated position as calculated from
the data of built-in sensor. However, if only the data from the
built-in sensor is available for a long period, positioning errors
are gradually compounded until the estimated position becomes
unreliable. For this reason, whenever GPS signals are available,
they are matched with the data of the built-in sensor and used to
correct it for improved accuracy.
p If you use chains on your wheels for winter driving or put on
the spare wheel, errors may suddenly increase because of
difference in wheel diameter. Initialise the sensor status and
it may recover the accuracy to normal condition.
For details, refer to Clearing the status on page 62.
;*9&,*#32('1
As mentioned, the positioning systems used by this navigation
system are susceptible to certain errors. Their calculations may,
on occasion, place you in a location on the map where no road
exists. In this situation, the processing system understands that
vehicles travel only on roads, and can correct your position by
adjusting it to a nearby road. This is called map matching.
With map matching
Without map matching
!"#$%&'(')%"*
!990.C7O
JV
H*'>+('1&+*)1$&$))")%
Positioning errors are kept to a minimum by combining GPS,
dead reckoning and map matching. However, in some situa-
tions, these functions may not work properly, and the error may
become bigger.
W2$'&9"%(#("'('1&4-&XB<&(%&
(,9"%%(4+$
GPS positioning is disabled if signals cannot be received
from more than two GPS satellites.
In some driving conditions, signals from GPS satellites may
not reach your vehicle. In this case, it is impossible for the
system to use GPS positioning.
In tunnels or enclosed parking garages
Under elevated roads or similar structures
When driving among high buildings
When driving through a dense forest or tall trees
If a car phone or mobile phone is used near the GPS aerial,
GPS reception may be lost temporarily.
Do not cover the GPS aerial with spray paint or car wax,
because this may block the reception of GPS signals. Snow
buildup can also degrade the signals, so keep the aerial
clear.
p If a GPS signal has not been received for a long time, your
vehicle’s actual position and the current position mark on
the map may diverge considerably or may not be updated. In
such case, once GPS reception is restored, accuracy will be
recovered.
@"'>(#("'%&+(A$+-&#"&3*6%$&'"#(3$*4+$&
9"%(#("'('1&$))")%
For various reasons, such as the state of the road you are trav-
elling on and the reception status of the GPS signal, the actual
position of your vehicle may differ from the position displayed on
the map screen.
If you make a slight turn.
If there is a parallel road.
If there is another road very nearby, such as in the case of an
elevated motorway.
If you take a recently opened road that is not on the map.
!"#$%&'(')%"*
!990.C7O
JJ
If you drive in zigzags.
If the road has a series of hairpin bends.
If there is a loop or similar road configuration.
If you take a ferry.
If you are driving on a long, straight road or a gently curving
road.
If you are on a steep mountain road with many height
changes.
If you enter or exit a multi-storey car park or similar structure
using a spiral ramp.
If your vehicle is turned on a turntable or similar structure.
If your vehicle’s wheels spin, such as on a rough track or in
snow.
!"#$%&'(')%"*
!990.C7O
J'
If you put on chains, or change your tyres for ones with a
different size.
If trees or other obstacles block the GPS signals for a consid-
erable period.
If you drive very slowly, or in a start-and-stop manner, as in a
traffic jam.
If you join the road after driving around a large car park.
When you drive around a roundabout.
When starting driving immediately after starting the engine.
8"6#$&%$##('1&('/"),*#("'
1NTSDÐRD@QBGÐRODBHÆB@SHNMR
Your navigation system sets a route to your destination by apply-
ing certain built-in rules to the map data. This section provides
some useful information about how a route is set.
CAUTION
When a route is calculated, the route and voice guidance
for the route are automatically set. Also, for day or time
traffic regulations, only information about traffic regulations
applicable at the time when the route was calculated is
considered. One-way streets and street closures may not
be taken into consideration. For example, if a street is open
during the morning only, but you arrive later, it would be
against the traffic regulations so you cannot drive along the
set route. When driving, please follow the actual traffic signs.
Also, the system may not know some traffic regulations.
The calculated route is one example of the route to your
destination decided by the navigation system while taking
the type of streets or traffic regulations into account. It is not
necessarily an optimum route. (In some cases, you may not
be able to set the streets you want to take. If you need to take
a certain street, set a waypoint on that street.)
If the destination is too far, there may be instances where the
route cannot be set. (If you want to set a long-distance route
going across several areas, set waypoints along the way.)
During voice guidance, turns and intersections from the
motorway are announced. However, if you pass intersec-
tions, turns, and other guidance points in rapid succession,
some may delay or not be announced.
It is possible that guidance may direct you off a motorway
and then back on again.
In some cases, the route may require you to travel in the
opposite direction to your current heading. In such cases,
you are instructed to turn around, so please turn around
safely by following the actual traffic rules.
In some cases, a route may begin on the opposite side of
a railway or river from your actual current location. If this
happens, drive towards your destination for a while, and try
route calculation again.
When there is a traffic jam ahead, a detour route may not
be suggested if driving through the traffic jam would still be
better than taking the detour.
There may be instances when the starting point, the way-
point and the destination point are not on the highlighted
route.
!"#$%&'(')%"*
!990.C7O
JO
The number of roundabout exits displayed on the screen
may differ from the actual number of roads.
8"6#$&2(12+(12#('1
Once set, the route is highlighted in bright colour on the
map.
The immediate vicinity of your starting point and destination
may not be highlighted, and neither will areas with particu-
larly complex road layouts. Consequently, the route may
appear to be cut off on the display, but voice guidance will
continue.
:6#"&)$)"6#$&/6'3#("'
If you deviate from the set route, the system will re-calculate
the route from that point so that you remain on track to the
destination.
This function may not work under certain conditions.
H*'>+('1&*'>&3*)$&"/&>(%3%
Some basic precautions are necessary when handling your
discs.
.6(+#G('&>)(0$&*'>&3*)$
Use only conventional, fully circular discs. Do not use
shaped discs.
Do not use cracked, chipped, warped, or otherwise damaged
discs as they may damage the built-in drive.
Use 12-cm discs. Do not use 8-cm discs or an adapter for
8-cm discs.
When using discs that can be printed on label surfaces,
check the instructions and the warnings of the discs.
Depending on the discs, inserting and ejecting may not be
possible. Using such discs may result in damage to this
equipment.
Do not attach labels, write on or apply chemicals to the
surface of the discs.
Do not attach commercially available labels or other materi-
als to the discs.
To clean a disc, wipe it with a soft cloth, moving outward
from the centre.
Condensation may temporarily impair the built-in drive’s
performance.
Playback of discs may not be possible because of disc
characteristics, disc format, recorded application, playback
environment, storage conditions and so on.
Road shocks may interrupt disc playback.
Read the precautions for discs before using them.
:,4($'#&3"'>(#("'%&/")&9+*-('1&*&>(%3
At extremely high temperatures, a temperature cutout
protects this product by switching it off automatically.
Despite our careful design of the product, small scratches
that do not affect actual operation may appear on the disc
surface as a result of mechanical wear, ambient conditions
for use or handling of the disc. This is not a sign of the
malfunction of this product. Consider it to be normal wear
and tear.
B+*-*4+$&>(%3%
5J5GJ(>$"
p is a trademark of DVD Format/Logo Licensing
Corporation.
It is not possible to play DVD-Audio discs. This DVD drive
may not be able to play all discs bearing the marks shown
above.
@5
:J@H5&)$3")>$>&>(%3%
This unit is not compatible with discs recorded in AVCHD
(Advanced Video Codec High Definition) format. Do not insert
AVCHD discs. If inserted, the disc may not be ejected.
B+*-('1&56*+5(%3
DualDiscs are two-sided discs that have a recordable CD
for audio on one side and a recordable DVD for video on the
other.
Playback of the DVD side is possible with this product.
However, since the CD side of DualDiscs is not physically
compatible with the general CD standard, it may not be
possible to play the CD side with this product.
Frequent loading and ejecting of a DualDisc may result in
scratches to the disc.
Serious scratches can lead to playback problems on this
product. In some cases, a DualDisc may become stuck
in the disc-loading slot and will not eject. To prevent this,
we recommend you refrain from using DualDisc with this
product.
Please refer to the manufacturer for more detailed informa-
tion about DualDiscs.
5"+4-&5(1(#*+
This product will down-mix Dolby Digital signals internally and
the sound will be output in stereo.
p Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
5$#*(+$>&('/"),*#("'&/")&9+*-*G
4+$&,$>(*
@",9*#(4(+(#-
@",,"'&'"#$%&*4"6#&>(%3&
3",9*#(4(+(#-
Certain functions of this product may not be available for
some discs.
Compatibility with all discs is not guaranteed.
It is not possible to play back DVD-RAM discs.
!"#$%&'(')%"*
!990.C7O
'Z
Playback of discs may become impossible with direct expo-
sure to sunlight, high temperatures, or depending on the
storage conditions in the vehicle.
DVD-Video discs
DVD-Video discs that have incompatible region numbers
cannot be played on this DVD drive. The region number of
the player can be found on this product’s chassis.
DVD-R/DVD-RW/DVD-R SL (Single Layer)/DVD-R DL
(Dual Layer) discs
Unfinalised discs which have been recorded with the Video
format (video mode) cannot be played back.
Discs which have been recorded with the Video Recording
format (VR mode) cannot be played back.
DVD-R DL (Dual Layer) discs which have been recorded with
Layer Jump recording cannot be played back.
For detailed information about recording mode, please
contact the manufacturer of media, recorders, or writing
software.
CD-R/CD-RW discs
Unfinalised discs cannot be played back.
It may not be possible to playback CD-R/CD-RW discs
recorded on a music CD recorder or a computer because
of disc characteristics, scratches or dirt on the disc, or dirt,
scratches or condensation on the lens of the built-in drive.
Playback of discs recorded on a computer may not be pos-
sible, depending on the recording device, writing software,
their settings, and other environmental factors.
Please record with the correct format. (For details, please
contact manufacturer of media, recorders, or writing
software.)
Titles and other text information recorded on a CD-R/CD-RW
disc may not be displayed by this product (in the case of
audio data (CD-DA)).
Read the precautions with CD-R/CD-RW discs before using
them.
@",,"'&'"#$%&*4"6#&#2$&$Z#$)'*+&
%#")*1$&>$0(3$&S=<.N&<5T
Do not leave the external storage device (USB, SD) in any
location with high temperatures.
Depending on the kind of the external storage device (USB,
SD) you use, this product may not recognize the storage
device or files may not be played back properly.
The text information of some audio and video files may not
be correctly displayed.
File extensions must be used properly.
There may be a slight delay when starting playback of files
on an external storage device (USB, SD) with complex folder
hierarchies.
Operations may vary depending on the kind of an external
storage device (USB, SD).
It may not be possible to play some music files from SD or
USB because of file characteristics, file format, recorded
application, playback environment, storage conditions, and
so on.
Copyright protected files cannot be played back.
SD memory cards
For details about SD memory card compatibility with this
product, refer to Specifications on page 85
Some SD memory cards may not be recognised by this
unit even if the SD memory cards can be recognised by a
computer. Formatting the SD memory cards using a dedi-
cated formatter may resolve the problem. SD memory cards
formatted using the standard formatting function on a com-
puter do not comply with the SD standard. Problems such
as that those cards cannot be read or written could occur. It
is recommended that you use a dedicated formatter to avoid
such problems. All of the data stored on an SD memory
card will be deleted when the card is formatted. Back up any
needed data beforehand as necessary. A dedicated format-
ter for SD memory cards can be obtained from the following
site.
E==;G[WWOOORG?439?RC9DW
This product is not compatible with the Multi Media Card
(MMC).
USB storage devices
For details about USB storage device compatibility with this
product, refer to Specifications on page 85.
Protocol: bulk
You cannot connect a USB storage device to this product via
a USB hub.
Partitioned USB storage device is not compatible with this
product.
Firmly secure the USB storage device when driving. Do not
let the USB storage device fall onto the floor, where it may
become jammed under the brake or accelerator.
There may be a slight delay when starting playback of audio
files encoded with image data.
Some USB storage devices connected to this product may
generate noise on the radio.
Do not connect anything other than the USB storage device.
For a USB storage device that plays music files alone, the
playback or search sequence with this product may be
different from that of the device.
"NLLNMÐMNSDRÐ@ANTSÐ#HU7ÐÆKDR
Only DivX files downloaded from DivX partner sites are guar-
anteed for proper operation. Unauthorised DivX files may not
operate properly.
DRM rental files cannot be operated until playing back is
started.
This product corresponds to a DivX file display of up to 1
590 m inutes 43 seconds. Search operations beyond this time
limit are prohibited.
DivX VOD file playback requires supplying the ID code of this
product to the DivX VOD provider. Regarding the ID code,
refer to Displaying your DivX VOD registration code on page
68.
For details on the Divx video versions that can be played on
this product, refer to Specifications on page 85.
For more details about DivX, visit the following site:
http://www.divx.com/
DivX subtitle files
Srt format subtitle files with the extension “.srt” can be used.
Only one subtitle file can be used for each DivX file. Multiple
subtitle files cannot be associated.
Subtitle files that are named with the same character string
as the DivX file before the extension are associated with the
DivX file. The character strings before the extension must be
exactly the same. However, if there is only one DivX file and
one subtitle file in a single folder, the files are associated
even if the file names are not the same.
The subtitle file must be stored in the same folder as the
DivX file.
Up to 255 subtitle files may be used. Any more subtitle files
will not be recognised.
Up to 64 characters can be used for the name of the subtitle
file, including the extension. If more than 64 characters
are used for the file name, the subtitle file may not be
recognised.
The character code for the subtitle file should comply with
ISO-8859-1. Using characters other than ISO-8859-1 m ay
cause the characters to be displayed incorrectly.
The subtitles may not be displayed correctly if the displayed
characters in the subtitle file include control code.
For materials that use a high transfer rate, the subtitles and
video may not be completely synchronised.
If multiple subtitles are programed to display within a very
short time frame, such as 0.1 seconds, the subtitles may not
be displayed at the correct time.
;$>(*&3",9*#(4(+(#-&32*)#
X$'$)*+
Files may not be played back properly depending on the
environment in which the file was created or on the contents
of the file.
!"#$%&'(')%"*
!990.C7O
'(
This product may not play back files, depending on the
application used to encode the files.
This product may not operate correctly, depending on the
application used to encode WMA files.
Depending on the version of Windows Media™ Player used to
encode WMA files, album names and other text information
may not be correctly displayed.
There may be a slight delay when starting playback of audio
files encoded with image data.
This product is not compatible with packet write data
transfer.
This product can recognise up to 32 ch aracters, beginning
with the first character, including extension for the file and
folder name. Depending on the display area, this product
may try to display them with a reduced font size. However,
the maximum number of the characters that you can display
varies according to the width of each character, and of the
display area.
Folder selection sequence or other operations may be
altered, depending on the encoding or writing software.
Regardless of the length of blank section between the songs
of original recording, compressed audio discs play with a
short pause between songs.
Maximum playback time of audio file stored in the disc: 60 h
Maximum playback time of audio file stored on an external
storage device (USB, SD): 7.5 h (450 m inutes)
This product assigns folder numbers. The user cannot
assign folder numbers.
CD-R/-RW
File system: ISO9660 level 1.ISO9660 level 2.Romeo, Joliet.UDF
1.02/1.50/2.00/2.01/2.50
Maximum number of folders: 700
Maximum number of files: 999
Playable file types: MP3, WMA, AAC, DivX, MPEG1, MPEG2,
MPEG4
DVD-R/-R SL/-R DL/ DVD-RW
File system: ISO9660 level 1.ISO9660 level 2.Romeo, Joliet.UDF
1.02/1.50/2.00/2.01/2.50
Maximum number of folders: 700
Maximum number of files: 3 500
Playable file types: MP3, WMA, AAC, DivX, MPEG1, MPEG2,
MPEG4
USB storage device/SD memory card
File system: FAT16/FAT32/NTFS
Maximum number of folders: 1 500
Maximum number of files: 15 000
Playable file types: MP3, WMA, AAC, WAV, FLAC, H.264, MPEG-
2, MPEG-4, WMV, FLV, MKV, JPEG
;BO&3",9*#(4(+(#-
Ver. 2.x of ID3 tag is prioritised when both Ver. 1.x and Ver. 2.x
exist.
This product is not compatible with the following: MP3i (MP3
interactive), mp3 PRO, m3u playlist
CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW
File extension: .mp3
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 16 kHz to 48 kHz (32 kHz , 44.1 kHz ,48 kHz
for emphasis)
ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3
USB storage device/SD memory card
File extension: .mp2, .mp3, .m2a, .mka
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3, 2.4
W;:&3",9*#(4(+(#-
This product is not compatible with the following: Windows
Media™ Audio 9 Professional, Lossless, Voice
CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW
File extension: .wma
Bit rate: 5 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
USB storage device/SD memory card
File extension: .wma
Bit rate: 5 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz
W:J&3",9*#(4(+(#-
The sampling frequency shown in the display may be
rounded.
WAV files on the CD-R/-RW, DVD-R/-RW/-R SL/-R DL cannot
be played.
USB storage device/SD memory card
File extension: .wav
Format: Linear PCM (LPCM)
Sampling frequency: 16 kHz to 48 kHz
Quantization bits: 8 bits and 16 bits
::@&3",9*#(4(+(#-
This product plays back AAC files encoded by iTunes.
CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW
File extension: .m4a
Bit rate: 8 kbps to 320 kbps (CBR)
Sampling frequency: 8 kHz to 44.1 kHz
USB storage device/SD memory card
File extension: .aac, .adts, .mka, .m4a
Bit rate: 8 kbps to 320 kbps (CBR)
Sampling frequency: 8 kHz to 48 kHz
PC:@&3",9*#(4(+(#-
FLAC files on the CD-R/-RW, DVD-R/-RW/-R SL/-R DL cannot
be played.
USB storage device/SD memory card
File extension: .flac, .ogg
Bit rate: 8 kbps , 16 kbps , 24 kbps
Sampling frequency: 8 kHz to 48 kHz
5(0`&3",9*#(4(+(#-
This product is not compatible with the following: DivX Ultra
format, DivX files without video data, DivX files encoded with
LPCM (Linear PCM) audio codec
Depending on the file information composition, such as the
number of audio streams, there may be a slight delay in the
start of playback on discs.
If a file contains more than 4 GB , playback stops before the
end.
Some special operations may be prohibited because of the
composition of DivX files.
Files with high transfer rates may not be played back cor-
rectly. The standard transfer rate is 4 Mbps for CDs and
10.08 Mbps for DVDs.
DivX files on the external storage device (USB, SD) cannot
be played.
CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW
File extension: .avi/.divx
Profile (DivX version): Home Theater Ver. 3.11/Ver. 4.x/Ver. 5.x/
Ver. 6.x
Compatible audio codec: MP3, Dolby Digital
Bit rate (MP3): 8 kbps to 320 kbps (CBR), VBR
Sampling frequency (MP3): 16 kHz to 48 kHz (32 kHz , 44.1 kHz ,
48 kHz for emphasis)
Maximum image size: 720 pixels × 576 pixels
Maximum file size: 4 GB
TCHNÐ@MCÐUHCDNÐÆKDRÐBNLO@SHAHKHSXÐ
S=<.N&<5T
Files may not be able to be played back depending on the bit
rate.
Only USB storage devices can play back VOB files.
.avi
Compatible video codec: MPEG-4/H.264/H.263/Xvid
Compatible audio codec: Linear PCM (LPCM)/MP3/AAC
!"#$%&'(')%"*
!990.C7O
'+
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.mp4
Compatible video codec: MPEG-4/H.264/H.263
Compatible audio codec: MP3/AAC
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.3gp
Compatible video codec: MPEG-4/H.264/H.263
Compatible audio codec: AAC
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.mkv
Compatible audio codec: MPEG-4/H.264/VC-1/Xvid
Compatible audio codec: MP3/AAC/Vorbis
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.mov
Compatible video codec: MPEG-4/H.264/H.263
Compatible audio codec: MP3/AAC
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.f4v
Compatible video codec: H.264/H.263
Compatible audio codec: MP3/AAC
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.wmv
Compatible video codec: WMV/VC-1
Compatible audio codec: WMA
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.asf
Compatible video codec: WMV/VC-1
Compatible audio codec: WMA
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.flv
Compatible video codec: H.264
Compatible audio codec: MP3/AAC
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.vob
Compatible video codec: H.264/MPEG-2
Compatible audio codec: Linear PCM (LPCM)/MP3/AAC
Maximum resolution: 720 pixels × 480 pixels
Maximum Frame rate: 30 fps
Maximum file size: 4 GB
Maximum playback time: 150 m inutes
.+6$#""#2
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PIONEER CORPORATION is under license. Other trademarks
and trade names are those of their respective owners.
<5H@
SDHC Logo is a trademark of SD-3C, LLC.
W;:EW;J
Windows Media is either a registered trademark or trademark
of Microsoft Corporation in the United States and/or other
countries.
p This product includes technology owned by Microsoft
Corporation and cannot be used or distributed without a
license from Microsoft Licensing, Inc.
PC:@
Copyright © 2000-2009 Josh Coalson
Copyright © 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
— Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
— Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
— Neither the name of the Xiph.org Foundation nor the names
of its contributors may be used to endorse or promote prod-
ucts derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
5(0`
!"#$%&'(')%"*
!990.C7O
'S
DivX Certified® devices have been tested for high-quality DivX®
(.divx, .avi) video playback. When you see the DivX logo, you
know you have the freedom to play your favourite DivX movies.
DivX®, DivX Certified® and associated logos are trademarks of
DivX, LLC and are used under license.
This DivX Certified® device has passed rigorous testing to ensure
it plays DivX® video.
To play purchased DivX movies, first register your device at vod.
divx.com. Find your registration code in the DivX VOD section of
your device setup menu.
Refer to Displaying your DivX VOD registration code on page
68
::@
AAC is short for Advanced Audio Coding and refers to an audio
compression technology standard used with MPEG-2 and
MPEG-4. Several applications can be used to encode AAC files,
but file formats and extensions differ depending on the appli-
cation which is used to encode. This unit plays back AAC files
encoded by iTunes.
X""1+$N&X""1+$&B+*-N&:'>)"(>™
Google, Google Play and Android are trademarks of Google Inc.
:'>)"(>&:6#"
Android Auto is a trademark of Google Inc.
;D`?8:`
MIXTRAX is a trademark of the PIONEER CORPORATION.
5$#*(+$>&('/"),*#("'&)$1*)>('1&
3"''$3#$>&(B">&>$0(3$%
Pioneer accepts no responsibility for data lost from an
iPod, even if that data is lost while using this product.
Please back up your iPod data regularly.
Do not leave the iPod in direct sunlight for extended
amounts of time. Extended exposure to direct sunlight
can result in iPod malfunction due to the resulting high
temperature.
Do not leave the iPod in any location with high
temperatures.
Firmly secure the iPod when driving. Do not let the iPod
fall onto the floor, where it may become jammed under the
brake or accelerator.
For details, refer to the iPod manuals.
(B2"'$&*'>&(B">
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod or
iPhone, respectively, and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod or iPhone
may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trade-
marks of Apple Inc., registered in the U.S. and other countries.
C(12#'('1
Lightning is a trademark of Apple Inc.
:99&<#")$
App Store is a service mark of Apple Inc.
(K<
iOS is a trademark on which Cisco holds the trademark right in
the US and certain other countries.
(?6'$%
iTunes is a trademark of Apple Inc., registered in the U.S. and
other countries.
:99+$&;6%(3
Apple Music is a trademark of Apple Inc., registered in the U.S.
and other countries.
:99+$&@*)B+*-
Apple CarPlay is a trademark of Apple Inc.
Use of the Apple CarPlay logo means that a vehicle user inter-
face meets Apple performance standards. Apple is not responsi-
ble for the operation of this vehicle or its compliance with safety
and regulatory standards. Please note that the use of this prod-
uct with iPhone or iPod may affect wireless performance.
=%('1&*99G4*%$>&3"''$3#$>&
3"'#$'#
Important
Requirements to access app-based connected content
services using this product:
Latest version of the Pioneer compatible connected
content application(s) for the smartphone, available from
the service provider, downloaded to your smartphone.
A current account with the content service provider.
Smartphone Data Plan.
Note: if the Data Plan for your smartphone does not pro-
vide for unlimited data usage, additional charges from
your carrier may apply for accessing app-based connected
content via 3G, EDGE and/or LTE (4G) networks.
Connection to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi
network.
Optional Pioneer adapter cable connecting your iPhone to
this product.
Limitations:
Access to app-based connected content will depend on the
availability of cellular and/or Wi-Fi network coverage for
the purpose of allowing your smartphone to connect to the
Internet.
!"#$%&'(')%"*
!990.C7O
'&
Service availability may be geographically limited to the
region. Consult the connected content service provider for
additional information.
Ability of this product to access connected content is
subject to change without notice and could be affected
by any of the following: compatibility issues with future
firmware versions of smartphone; compatibility issues with
future versions of the connected content application(s)
for the smartphone; changes to or discontinuation of the
connected Content application(s) or service by its provider.
Pioneer is not liable for any issues that may arise from
incorrect or flawed app-based content.
The content and functionality of the supported applications
are the responsibility of the App providers.
In ";;-3?HC(,C?8, ";;B8(6391B3K and ":?9CH?("<=C,
functionality through the product is limited while driving,
with available functions determined by the App providers.
Availability of ";;-3?HC(,C?8, ";;B8(6391B3K and
":?9CH?("<=C functionalities is determined by the App
provider, and not determined by Pioneer.
";;-3?HC(,C?8, ";;B8(6391B3K and ":?9CH?("<=C allow
access to applications other than those listed (subject to
limitations while driving), but the extent to which content
can be used is determined by the App providers.
H5;D
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
;HC
MHL, the MHL Logo, and Mobile High-Definition Link are trade-
marks or registered trademarks of MHL, LLC in the United States
and other countries.
DJK!:&?$Z#G#"G<9$$32
!"#(3$&)$1*)>('1&0(>$"&0($I('1
Remember that use of this system for commercial or public view-
ing purposes may constitute an infringement on the author’s
rights as protected by the Copyright Law.
!"#(3$&)$1*)>('1&5J5GJ(>$"&
0($I('1
This item incorporates copy protection technology that is pro-
tected by U.S. patents and other intellectual property rights of
Rovi Corporation. Reverse engineering and disassembly are
prohibited.
-NSHBDÐQDF@QCHMFÐ,/ÐÆKDÐ
6%*1$
Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenue-gen-
erating) real time broadcasting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming via internet, intranets
and/or other networks or in other electronic content distribution
systems, such as pay-audio or audio-on-demand applications.
An independent license for such use is required. For details,
please visit
http://www.mp3licensing.com.
!"#(3$&)$1*)>('1&"9$'&%"6)3$&
+(3$'3$%
For details about the open source licences for the functions that
this product is equipped with, please visit
http://www.oss-pioneer.com/car/multimedia/
;*9&3"0$)*1$
For details about the map coverage of this product, refer to the
information on our website.
=%('1&#2$&C@5&%3)$$'&3"))$3#+-
H*'>+('1&#2$&C@5&%3)$$'
When the LCD screen is subjected to direct sunlight for
a long period of time, it will become very hot, resulting in
possible damage to the LCD screen. When not using this
product, avoid exposing it to direct sunlight as much as
possible.
The LCD screen should be used within the temperature
ranges shown in Specifications on page 85.
Do not use the LCD screen at temperatures higher or lower
than the operating temperature range, because the LCD
screen may not operate normally and could be damaged.
The LCD screen is exposed in order to increase its visibility
within the vehicle. Please do not press strongly on it as this
may damage it.
Do not push the LCD screen with excessive force as this may
scratch it.
Never touch the LCD screen with anything besidess your
finger when operating the touch panel functions. The LCD
screen can scratch easily.
C(Q6(>&3)-%#*+&>(%9+*-&SC@5T&%3)$$'
If the LCD screen is near the vent of an air conditioner, make
sure that air from the air conditioner is not blowing on it.
Heat from the heater may break the LCD screen, and cool
air from the cooler may cause moisture to form inside this
product, resulting in possible damage.
Small black dots or white dots (bright dots) may appear on
the LCD screen. These are due to the characteristics of the
LCD screen and do not indicate a malfunction.
The LCD screen will be difficult to see if it is exposed to direct
sunlight.
When using a mobile phone, keep the aerial of the mobile
phone away from the LCD screen to prevent disruption of the
!"#$%&'(')%"*
!990.C7O
'D
video in the form of disturbances such as spots or coloured
stripes.
;*('#*('('1&#2$&C@5&%3)$$'
When removing dust from or cleaning the LCD screen, first
turn this product off and then wipe the screen with a soft dry
cloth.
When wiping the LCD screen, take care not to scratch the
surface. Do not use harsh or abrasive chemical cleaners.
CF5&S+(12#G$,(##('1&>(">$T&4*3A+(12#
A light emitting diode is used inside the display to illuminate the
LCD screen.
At low temperatures, using the LED backlight may increase
image lag and degrade the image quality because of the
characteristics of the LCD screen. Image quality will improve
with an increase in temperature.
The product lifetime of the LED backlight is more than
10 000 h ours. However, it may decrease if used in high
temperatures.
If the LED backlight reaches the end of its product lifetime,
the screen will become dimmer and the image will no longer
be visible. In that case, please consult your dealer or the
nearest authorised Pioneer Service Station.
2ODBHÆB@SHNMR
X$'$)*+
Rated power source ......................................................... 14.4 V DC
( 12.0 - 14.4 V allowable)
Earthing system ..........................................................Negative type
Maximum current consumption ........................................... 10.0 A
Dimensions (W × H × D):
LMM@"2
DIN
Chassis ...........................................178 mm × 100 mm × 157 mm
Nose ..................................................188 mm × 118 mm × 29 mm
D
Chassis ............................................178 mm × 100 mm × 164 mm
Nose ....................................................171 mm × 97 mm × 21 mm
LMN@"2
DIN
Chassis ...........................................178 mm × 100 mm × 157 mm
Nose ..................................................188 mm × 118 mm × 27 mm
D
Chassis ............................................178 mm × 100 mm × 164 mm
Nose .....................................................171 mm × 97 mm × 20 mm
LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
DIN
Chassis ...........................................178 mm × 100 mm × 157 mm
Nose ..................................................188 mm × 118 mm × 16 mm
D
Chassis ............................................178 mm × 100 mm × 164 mm
Nose ......................................................170 mm × 97 mm × 8 mm
LMM@"2/LMN@"2
Weight .......................................................................................2.1 kg
LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
Weight .......................................................................................1.8 kg
NAND flash memory ................................................................16 GB
!*0(1*#("'
GPS receiver:
System ................................................................... L1, C/Acode GPS
SPS (Standard Positioning Service)
Reception system ......50-channel multi-channel reception system
Reception frequency ................................................... 1 575.42 MHz
Sensitivity ................................................................. –140 dBm (typ)
Position update frequency.......................Approx. once per second
GPS aerial:
Aerial ........ Micro strip flat aerial/right-handed helical polarization
Aerial cable ............................................................................ 3.55 m
Dimensions (W × H × D) ..................33 mm × 14.7 mm × 36 mm
Weight ......................................................................................73.7 g
5(%9+*-
LMM@"2/LMN@"2
Screen size/aspect ratio ..... 6.95 inch wide/16:9 (effective display
area: 156.6 mm × 81.6 mm)
LPMN@"2/LPMN2&/LPMMN@"2/LPMMN2&
Screen size/aspect ratio ......6.2 inch wide/16:9 (effective
display area: 136.2 mm × 72 mm)
Pixels .................................................... .... 1 152 000 ( 2 400 × 480 )
Display method ........................................ TFT Active matrix driving
Colour system ........ PAL/NTSC/PAL-M/PAL-N/SECAM compatible
Durable temperature range:
Power off ................................................................ –20 °C to +80 °C
:6>("
Maximum power output ................................................... 50 W × 4
Continuous power output ..... 22 W × 4 (50 Hz to 15 kHz , 5 %THD,
/2$'%RWK&KDQQHOV'ULYHQ
Load impedance .....................................WRDOORZDEOH
Preout output level (max) ......................................................... 4.0 V
Equaliser (13-Band Graphic Equaliser):
Frequency ........50 Hz /80 Hz /125 Hz /200 Hz /315 Hz /500 Hz /800 Hz
/1.25 kHz /2 kHz /3.15 kHz /5 kHz /8 kHz /12.5 kHz
Gain .......................................................................................±12 dB
HPF:
Frequency ..........50 Hz /63 Hz /80 Hz /100 Hz /125 Hz /160 Hz /200 Hz
Slope ......................................... –6 dB /oct, –12 dB /oct, –18 dB /oct
Subwoofer (mono):
Frequency ..........50 Hz /63 Hz /80 Hz /100 Hz /125 Hz /160 Hz /200 Hz
Slope ......................................... –6 dB /oct, –12 dB /oct, –18 dB /oct
Gain ...................................................................... –24 dB to +10 dB
Phase ...................................................................... Normal/Reverse
Time alignment .....................................0 to 200 step (2.5 cm/step)
5J5&>)(0$
System ........DVD-Video, VCD, CD, MP3, WMA, AAC, DivX, MPEG
player
Region number ................................................................................2
Usable discs .............................DVD-VIDEO, VIDEO-CD, CD, CD-R,
CD-RW, DVD-R, DVD-RW, DVD-RDL
Frequency response ...... 5 Hz to 44 000 Hz (with DVD, at sampling
frequency 96 kHz)
Signal-to-noise ratio .... 96 dB (1 kHz ) (IEC-A network) (RCA level)
Output level:
Video .............................................................1.0 V SS9 )
Number of channels ..........................................................2 (stereo)
MP3 decoding format .................... MPEG-1, 2 & 2.5 A udio Layer 3
WMA decoding format ...Ver.7, 8, 9 (2 ch audio) (Windows Media
Player)
AAC decoding format ..........MPEG-4 A AC (iTunes encoded only):
.m4a (Ver. 11 and earlier)
DivX decoding format ......Home Theater Ver.3.11, Ver.4.X, Ver.5.X,
Ver.6.X : .avi, .divx
MPEG video decoding format ................ MPEG-1: mpg, mpeg, dat
MPEG-2 PS: mpg, mpeg
MPEG-4 Part2 (Visual), MS MPEG-4 V er.3: avi
=<.
USB standard spec ......................... USB 1.1, USB 2.0 High speed
Max current supply .................................................................. 1.6 A
USB Class ................................ MSC (Mass Storage Class) device,
iPod (AudioClass, HID Class) device
File system ........................................................FAT16, FAT32, NTFS
MP3 decoding format .............. MPEG-1/Layer 1, MPEG-1/Layer 2,
MPEG-1/Layer 3, MPEG-2/Layer 1, MPEG-2/Layer 2, MPEG-2/
Layer 3, MPEG-2.5/Layer 3
WMA decoding format ..........................WMA10 Std, WMA10 Pro,
WMA9 Lossless
AAC decoding format .............MPEG-2 A AC-LC, MPEG-4 A AC-LC
WAV signal format ........................................................Linear PCM
FLAC decoding format .......Ver. 1.3.0 (Free Lossless Audio Codec)
H.264 video decoding format ........ Base Line Profile, Main Profile,
High Profile
WMV video decoding format ................. VC-1 SP/MP/AP, WMV 7/8
MPEG4 video decoding format ................................ Simple Profile,
Advanced Simple Profile (except GMC)
!"#$%&'(')%"*
!990.C7O
'V
JPEG decoding format .............................................................JPEG
<5
LMM@"2/LMN@"2
Compatible physical format ........................................... Version 2.0
File system ........................................................FAT16, FAT32, NTFS
MP3 decoding format .............. MPEG-1/Layer 1, MPEG-1/Layer 2,
MPEG-1/Layer 3, MPEG-2/Layer 1, MPEG-2/Layer 2, MPEG-2/
Layer 3, MPEG-2.5/Layer 3
WMA decoding format ..........................WMA10 Std, WMA10 Pro,
WMA9 Lossless
AAC decoding format .............MPEG-2 A AC-LC, MPEG-4 A AC-LC
WAV signal format ........................................................Linear PCM
FLAC decoding format .......Ver. 1.3.0 (Free Lossless Audio Codec)
H.264 video decoding format ........ Base Line Profile, Main Profile,
High Profile
WMV video decoding format ................. VC-1 SP/MP/AP, WMV 7/8
MPEG4 video decoding format ..Simple Profile, Advanced Simple
Profile (except GMC)
JPEG decoding format .............................................................JPEG
.+6$#""#2
Version .............................................Bluetooth 3.0 + EDR certified
Output power.............................................................. +4 dB m Max.
(Power class 2)
Frequency band ......................................2 400 MHz to 2 483.5 MHz
P;&#6'$)
Frequency range ......................................... 87.5 MHz to 108.0 MHz
Usable sensitivity ............11 dB f 9PRQR61G% )
Signal-to-noise ratio .....................................72 dB (IEC-A network)
;W&#6'$)
Frequency range .................................531 kHz to 1 602 kHz (9 kHz )
Usable sensitivity ............................................... 25 µV (S/N: 20 dB )
Signal-to-noise ratio .....................................62 dB (IEC-A network)
CW&#6'$)
Frequency range ................................................ 153 kHz to 281 kHz
Usable sensitivity ............................................... 28 µV (S/N: 20 dB )
Signal-to-noise ratio .....................................62 dB (IEC-A network)
5:.&#6'$)
LMM@"2/LMN@"2
Frequency range
Band $................................174.928 MHz to 239.200 MHz (5A-13F)
L Band ............................ 1 452.960 MHz to 1 490.624 MHz (LA-LW)
Usable sensitivity ..............................................................–100 dBm
S/N RATIO ................................................................................. 85 dB
Specifications and design are subject to possible modifica-
tions without notice due to improvements.
!"#$%&'(')%"*
!990.C7O
© 2016 PIONEER CORPORATION. All rights reserved.
To keep up to date with the latest navigational data,
you can periodically update your navigation system.
For further details, please visit:
http://pioneer.naviextras.com
!"gQgh(V9"*
!"#$%&'(')%"*
< CRB4818-B > EU
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/
Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404

Navigation menu