Rollei Car DVR 300 User Guide EN

User Manual: rollei Car DVR 300 - User Guide Free User Guide for Rollei Camcorder, Manual

Open the PDF directly: View PDF PDF.
Page Count: 30

DownloadRollei  Car DVR 300 - User Guide DVR-300 EN
Open PDF In BrowserView PDF
CarDVR-300

User Guide
in English
www.rollei.com

Contents (GPS)
About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WEEE Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Notes on Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Caution
.............................................. 6
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Inserting the Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Installing in Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2.1 Mount to Windshield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2.2 Adjust the Device Position . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3 Connecting to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4 Powering the Device On / Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4.1 Auto Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4.2 Manual Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.5 Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5.1 Set the Date and Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CarDVR-300

3 Using the Car Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1 Record Videos while Driving . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2 Parking Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.3 Emergency Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.4 The Recording Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Playback Videos and Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.1 The Playback Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.2 Deleting Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Adjusting the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 SuperCar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16
16
16
17
18
19
20
20
21
22
22
23
26
27
28
29

About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We made every effort to ensure that this User
Guide is accurate and complete. However, no liability is assumed for any errors
and omissions that may have occurred. The manufacturer reserves the right to
change the technical specifications without prior notice.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or
Battery by users in private households in the European Union.
This symbol on the product or on the packaging indicates that this
cannot be disposed of as a household waste. You must dispose of
your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic
equipment and/or battery. For more information about recycling of
this equipment and/or battery, please contact your city office, the shop where
you purchased the equipment or your household waste disposal service. The
recycling of materials will help to conserve natural resources and ensure that it
is recycled in a manner that protects human health and environment.
Battery Warning
• Never dismantle, crush, or pierce the battery, or allow the battery to
short-circuit. Do not expose battery being placed in high temperature
environment, if battery leaks or bulges, stop continue to use.
• Always charge using the system. Risk of explosion if battery is replaced by
an incorrect type.
• Keep the battery out of reach of children.
• Batteries may explode if exposed to naked fire. Never dispose of batteries in
a fire.
• Never replace the battery on your own; have the dealer do it for you.
• Disposed of used batteries observing local regulations.
• Before disposing the device, please remove the battery.
To remove the battery open the screws on the housing of the device.
4

Notes on Installation
1. This product shall be installed near the rear view-mirror, at the center of
windshield, if possible, for optimal viewing.
2. Make sure that the lens is within the wiping range of the windscreen wiper
to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on the
lens and will result in unclear videos or snapshots. Clean the lens on a
regular basis.
4. Do not install the device on a tinted window. Doing so may damage the tint
film.
5. Make sure that the installation position is not hindered by the tinted
window.
6. To use the products of the attached power charger only, please do not use
other brand power charger, in order to avoid equipment burn or cause the
battery explosion.

5

Caution
• Due to local laws and vehicles safety considerations, do not operate the
device while driving.
• Set up time and date accurately before you use this device.
• Please use SuperCar software in condition that Google Map is function
normally.
• The firmware function in the device is for reference only, please follow the
actual road condition.
• The results of GPS positioning are only for reference, and should not affect
the actual driving situation. The system also cannot ensure the positioning
accuracy.
• GPS positioning accuracy may differ depending on weather and location
such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except glass). Tinted window will also affect the performance of the GPS satellite reception.
• GPS reception performance on each device may differ. The system cannot
determine the accuracy of the positioning results from different devices.
• The values displayed in this system, such as speed, position, and the distance warning to the speed camera set points, may be inaccurate due to the
influence of surrounding environment. They are for your reference only.
• The system is used only for non-commercial use, within the maximum limits
permitted by applicable law. Our company does not accept any responsibility
for any data loss during the operation.
• It is normal that this product gets warm when in use.
• Improper use or operation of the product may result in damage of the
product or its accessories and void the warranty.

6

1

Introduction
Thank you for purchasing this advanced Car Recorder. This device is specifically designed for real time video and audio recording when driving.

1.1
•
•
•
•
•
•
•

Features
WFHD camera (2560x1080 @ 30fps)
2.4” LCD color screen
Wide angle lens
Motion detection
Automatic Emergency recording for collision detection
Supports SDHC up to 32GB
Supports WDR / GPS/ Parking Mode

1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.
1
2
3
4
5

Car Recorder
Quick start guide
CD-ROM
Bracket
Car adapter

1
2

3
4
5

7

1.3 Product Overview

1

2

3

5

8
9
10
11

7

12

14

13

6

No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
8

Item
Bracket Socket
Microphone
Power Button
Memory Card Slot
USB Connector
HD(Mini HDMI) Connector
Back Button ( )
LED Indicator
LCD Panel
Up Button ( )
Down Button ( )
Enter Button (OK)
Wide Angle Lens
Speaker

Note:
To operate the camcorder, press
the corresponding buttons
(7,10,11,12) according to guide
icons shown the screen.

2

Getting Started
2.1 Inserting the Memory Card
Insert memory card with the gold section facing upward and the screen of
the device facing upward too, as illustrated.
Push the memory card in until a click sound is heard, indicating the card is
in position.

To remove the memory card
Push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the device is turned on.
This may damage the memory card.
2. Please use a 32GB, Class 6 or above Micro SD card.
3. Please format the micro SD cards before the initial use.

9

2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Attach the bracket to the camcorder.
Slide it into the bracket holder until you hear a click.
2.

Before installing the bracket, please use alcohol to
clean the windshield and suction cup of the bracket.
Wait for dry and press suction-cup on the windshield.

3.

Hold the base firmly on the windshield and press
down the clamp to mount the car holder to the
windshield. Make sure the base is securely locked
in place.

Warning: Do not install the camcorder
on a tinted window. Doing so may
damage the tint film.
10

1.
2.

2.2.2 Adjust the Device Position
Loosen the knob (1) to swivel the
device vertically or horizontally.
Then tighten the knob to make sure the
device is securely locked in place.
1

11

2.3 Connecting to Power
Use only the supplied car adapter to power up on the device and charge
the built-in battery.

1.
2.

Connect one end of the car adapter to the USB connector of the device.
USB port input: DC 5V / 1A
Plug the other end of the car charger to the cigarette lighter socket of your
vehicle. Once the vehicle engine is started, the device automatically turns
on. Car charger input: DC 12 / 24V.

Note:
1. To use the products of the attached power charger only, please do not use
other brand power charger, in order to avoid equipment burn or cause the
battery explosion.
2. Red LED light indicates the battery is charging; when devices are connecting power cord to charge and the red light flashes, it indicates the device
temperature is too high and should unplug the power cord immediately.
3. Please take note if the environment temperature reaches 45°C or above,
the car adapter still can supply power to device, but it will not charge the
Lithium-ion battery. This is the characteristic of Lithium-ion and is not a
malfunction.
12

Battery Status Indicator:
Icon

Description
Full battery power.
2/3 battery power.
1/3 battery power.
Out of battery power.
Battery is charging.
Connect the car adapter to charge the battery,
battery is full charged.

Low Voltage

Note: If the device is connected to the car adapter and turned on, and the
screen displays a charging reminder symbol such as the image above, it means
that the available voltage is too low. Please wait for a few minutes until the
charging reminder symbol disappears before entering the video recording
mode to prevent invalid recording or file damage.

13

2.4 Powering the Device On / Off
2.4.1 Auto Power On/Off
Once the vehicle engine is started, the device automatically turns on. If
the Automatic Record function is enabled, the recording will automatically
start right away after the device turns on.
Once the vehicle engine is shut down, the camcorder automatically saves
the recording and turns off the power within 10 seconds
Note: Automatic power up and shut down assumes the power socket is
linked to the car ignition.
2.4.2 Manual Power On/Off
To manually turn on the power, press the
POWER button. Press power button shortly
to turn off the device.
To reset, press and hold the POWER button
for at least 8 seconds.

14

2.5 Initial Settings
Before using the device, we recommend you to enable the Automatic
Record function and set up the correct Date and Time.

1.
2.
3.
4.

2.5.1 Set the Date and Time
To set the correct date and time, follow
the steps as below:
Press the
button to enter the OSD menu.
Press the / button to select Date / Time
and press the OK button.
Press the / button to adjust the value and press the OK button to
move to another field.
Repeat step 3 until the date and time setting is complete.
Note: To ensure the accuracy of the video file time, please reset the date
and time when the battery power runs out or when not in use over 7 days.

15

3

•
•
•

16

Using the Car Recorder
3.1 Recording Videos
3.1.1 Record Videos while Driving
When the vehicle engine starts up, the camcorder automatically turns on
and starts recording.
Recording will automatically stop when the engine is switched off.
Note: On some cars, the recording will continue when the engine is
switched off.
With some vehicle models, the automatic power up and off feature of this
car camcorder will not function because the cigarette lighter/power socket
is not linked to the ignition system.
To work around this issue, please do one of the following:
Manually turn on or off the cigarette lighter/power socket if this is possible
with your vehicle model.
Manually plug in the power adapter into the socket to turn on the car
camcorder and unplug from the socket to turn off the car camcorder.
One video file is saved for every 3 or 5 minutes of recording. If the memory
card capacity is full, the oldest file in the memory card will be overwritten.

3.1.2 Parking Mode
If Parking Mode is activated, when manual power off, or turned off the car
adapter when the device is turned on, the system alert message “Press
OK Key to enter Parking Mode after 10sec.” will be displayed on the
screen. This means the system will enter Motion Detection automatically
in 10 seconds; when the device detects any motion or collision in front of
lens, Video Record will be activated for a duration the same as the length
setting.

1.
2.
3.
4.

1.
2.
3.

To set the parking mode, do the following:
Press the
button to enter the OSD menu.
Press the / button to select Parking Mode and press the
OK button.
Press the / button to select Motion Detection/ Parking Collision/ Dual
Mode and press the OK button.
Press the
button to exit the menu.
Note:
When the battery is fully charged and is in good condition, Motion
Detection can record continuously for about 30 minutes.
As the device is used, the battery storage capacity will decrease gradually.
This is a normal phenomenon for the battery
The LCD will be off in 30 seconds after the Motion Detection function is
enabled.

17

3.1.3 Emergency Recording
During normal video recording, press the OK
button to begin emergency recording mode.
The “Emergency” message will be displayed
immediately on the upper left corner of the
screen, and the recorded file will be continuous and protected from being overwritten.
After complete the emergency recording, it
will be back to normal recording mode

1.
2.

18

Note:
If the Collision Detection function is enabled and a collision is detected,
the camcorder will automatically trigger the emergency recording feature.
The emergency recording file is created as a new file, which will be
protected to avoid being overwritten by normal loop recording. 8 GB (or
above) memory card can save up to 10 emergency video files. The alert
message of “Emergency files are full” will pop up on the screen when the
emergency recording files are full, and the oldest emergency file will be
automatically deleted when a new emergency recording file is created.

3.1.4 The Recording Screen
1

6

10

2

7

3
4
5
No.
1
2
3
4
5

8

9

Item
Voice Record
Duration
Date and time
Guide icon (Menu)

Description
Indicates turn off voice record
Indicates the current recording duration.
Indicates the current recording date and time.
Press the
button to enter the OSD menu.

Guide icon
(Playback)

Press the button to switch to
Playback mode.

6 Resolution
7 Battery

1080P 30fps/ 720P 60fps/ 720P 30fps
Indicates the remaining battery power.

8

Guide icon
(Snapshot)

Press the
recording.

9

Guide icon
(Emergency)

Press the OK button to enter and initiate
emergency recording, and the recorded file
will be protected.

Satellite
positioning icon

The
icon appears on the screen when
satellite positioning of the device is ready

10

button to take a snapshot during

19

3.2 Playback Videos and Photos
1. During recording, press   button to browse for the desired video and
photo file.
2. Press the / button to select the file that you want to browse and
press the OK button.
3. Press the / button to view the next or the previous file and press the
OK button to view the file in full screen.
4. When user want to playback the emergency video file, they could check on
file name as EMER.
3.2.1 The Playback Screen
Video Playback Screen

Photo Playback Screen

6

7

5
1

2

3

No. Item
1 Guide icon
(Back)
2 Guide icon
(Previous)
3 Guide icon
(Next)
4 Guide icon (Pause)
5 Duration
6 Battery
7 File name

20

4

6

7
1

2

3

Description
button to return to file selection
Press the
display.
Press the button to view the previous
video/photo.
Press the button to view the next
video/photo.
Press the OK button to pause the video playback.
Indicates the elapse time / total recording time.
Indicates the estimated remaining battery power.
Indicates video / photo file name.

1.
2.
3.
4.
5.

3.2.2 Deleting Files
To delete file(s), do the following:
If recording is in progress, press the
button to enter the OSD menu.
Press the / button to select File Deletion and press the OK button.
Press the / button to select Delete One or Delete All, then press the
OK button.
After select Delete One, press the / button to select that you want to
delete, then press the OK button.
After select Delete All, press the / button to select Video File or Image
File that you want to delete, then select YES or NO to delete.

Note:
1. Deleted files CANNOT be recovered. Ensure the files have backup before
deletion.
2. Emergency files cannot be deleted from this operation. They can be
deleted by inserting memory card into your PC or format memory card.

21

4

Adjusting the Settings
4.1 Using the Menu
You can customize the video recording and other general settings via the
on-screen display (OSD) menus. Please note that the menus consist of
several pages. The menus can be selected by the / button.

1.

If recording is in progress, press the
button to open enter the
OSD menu.
Press the / button to select a menu option and press the OK button
to enter the selected menu.
Press the / button to select the desired setting and press the OK
button to confirm the setting.
Press the
button to exit the menu, back to recording mode

2.
3.
4.

22

4.2 Menu Tree
Refer to the below table for details on menu items and available menu options.

Menu
option
Satellite
Status

Description

Available option

Displays the current state of
the satellite reception.
Press / button to set
the satellite time. You may
customize it between GMT
+14:00 ~ GMT -12:00

Date / Time

Automatically synchronize
with the local satellite time.
When this feature is enabled,
the system will use the satellite
time, and you cannot manually
change the time.
Set the date and time.

Voice
Record

Setting for activating audio in
the video.

On / Off

Set
Timezone

Press / button to adjust
the value, press the OK button
to switch the field and confirm
Resolution Set the video resolution.
1920 x 1080 30fps /
1280 x 720 30fps /
1280 x 720 60fps
EV
Set the exposure
Press / button to set the
exposure level. You may
compensation.
customize it between -2 ~ +2
LCD Setting Set LCD off time. Device screen On / Turn Off After 30 sec. /
will be off after a set time if no Turn Off After 3 min. / Off
operation is detected during
the standby or record mode.
Press any button will switch it
on. (Recording is not affected
when screen is off).

23

4.2 Menu Tree
Menu
option
Volume

24

Description

Available option

Set the volume up and down

1~10

Distance
Unit

Select the unit for distance display.

KM / MILE

Record
Interval

Save respective video files in a
length of the selected duration.

3 min. / 5 min.

Collision
Detection

Enable / Disable the collision
High Sensitivity /
detection. If this function is enabled Normal Sensitivity /
and any collision is detected, the
Low Sensitivity / off
device will automatically trigger the
emergency recording.

Parking
Mode

If Parking Mode is activated, when
manual power off, or turned off
the car adapter when the device is
turned on, the system alert message
“Press OK Key to enter Parking
Mode after 10sec.” will be displayed
on the screen. This means the
system will enter Motion Detection
automatically in 10 seconds; when
the device detects any motion or collision in front of lens, Video Record
will be activated for a duration the
same as the length setting

Off
Motion Detection
Parking Collision
Dual Mode

WDR

Present a crisp and clear picture
quality with harmonious contrast
in a high contrast, high discrepancy
environment.

On / Off

4.2 Menu Tree
Menu
option
Language
Anti-flicker

Description

Available option

Set the on-screen display menu
language.

English

The local power supply may vary by
region. You should be aware of the
„Table for voltage and frequency of
different countries“ for the correct
setting

50Hz / 60Hz

File Deletion Delete the file(s).
Format
Format the memory card inserted
in the equipment. All the files in the
card will be erased.
Default
Reset all settings to factory default
settings.
About

Delete One/ Delete All
Yes / No

Yes / No

Firmware Version

25

5. Installing the Software
1. Place the attached CD ROM into the CD player.
2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD.
The following screen will be shown up:

3.

26

Press the [Menu] item to start the installation process according to the
instructions on-screen

6. SuperCar

7

8

9
10
11
12
13
14
15
16

1
2
3
4
5
6

Nr.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Element
Video Player
Play / Pause
Previous
Next
Stop
Google Map
Compass
Speed Meter
File Path
Browser File
File List
File Name
Volume
Current Duration / Total Duration
Signal Noise Ratio (SNR)
G-Sensor

Note:
1. To display the route on Google
Maps, please make sure the
internet is connected before
starting the video playback
2. Video files (MOV / TS) and
GPS/G-Sensor files (NMEA)
must be stored in the same
folder before starting the
playback.
3. The included SuperCar
software is only for Windows
computers.

27

7. Specifications
Item
Image sensor
Effective pixels
Storage media
LCD display
Lens
Focus range
GPS
Movie Clip
Still image (Snapshot)
Shutter
G-Sensor
ISO
White Balance
Microphone
Speaker
Interface
Battery
Operating Temperature
Operating Humidity
Storage Temperature
Dimensions
Weight

28

Description
1/2.7” CMOS sensor
1920 (H) x 1080 (V)
Support Micro SDHC, up to 32GB class 6
or above
2.4” LCD color TFT (112K pixels)
Wide Angle Fixed Focus lens | F2.0, f=3.8mm
1.5m~Infinity
U-blox G7020-KT
Resolution: 1080p/30fps, 720p/60fps, 720p/30fps
Format: MOV
Resolution: 2M 1920(H) x 1080(V)
Format: DCF (JPEG, Exif: 2.2)
Electronic shutter
Auto: 1/33, 120- 1/30sec.
3-Axis G-Force sensor
Auto
Auto
Yes
Yes
Mini USB; Mini C Type HDMI
Built-in 470mAH Li-polymer rechargeable
0° ~ 60° C
20 ~ 70% RH
-20° ~ 70° C
70 x 63 x 31.3 mm
approx. 94 g

8 CE Conformity
The Manufacturer hereby declares that the CE marking was applied to the
Rollei CarDVR-300 in accordance with the basic requirements and other relevant provisions of the following CE Directives:
2011/65/EC
2004/108/EC
1999/5/EG
2006/95/EEC
2002/96/EG

RoHs Directive
Low Voltage Directive
R&TTE Directive
LVD Directive
WEEE Directive

The EC Declaration of Conformity can be requested from the address specified
on the Warranty card.

29

Distribution:
Rollei GmbH & Co. KG
Tarpen 40/Gebäude 7b
22419 Hamburg
Service Hotline:
+49 40 270750270
Rollei Return Service
Germany:
Denisstraße 28a
67663 Kaiserslautern

www.rollei.de/social
www.rollei.com/social

www.rollei.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 30
PDF Version                     : 1.4
Producer                        : Mac OS X 10.6.8 Quartz PDFContext
Creator                         : Adobe InDesign CC 2015 (Macintosh)
Create Date                     : 2016:06:07 14:30:19Z
Modify Date                     : 2016:06:07 14:30:19Z
EXIF Metadata provided by EXIF.tools

Navigation menu