ruwido austria 761B Remote Control with BT 4.0 Low Energy User Manual CONFIDENTIAL

Download:
Mirror Download [FCC.gov]
Document ID	2883126
Application ID	w01gpPCkaNCwHjPOTE737g==
Document Description	User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.59kB (207426 bits)
Date Submitted	2016-01-25 00:00:00
Date Available	2016-01-26 00:00:00
Creation Date	2015-11-20 08:17:23
Document Lastmod	2015-11-20 08:17:23
Document Title	CONFIDENTIAL
Document Author:	Thomas Mirlacher

ble remote control guide
please note: this document must not be shared with third parties without
prior written consent from ruwido
product types:
2761-515, 2761-525,
2761-526, 2761-531
ruwido austria gmbh . Köstendorfer Str. 8 . Austria . t +43 6216 4571-0 . www.ruwido.com
Page 1 of 3
This document is intellectual property of ruwido austria gmbh and contains confidential information. Reproduction, modification,.
communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido austria. © 2015.
1 LED behaviour during regular operation

LED behaviour: green LED when BLE command is transmitted (as long as button is
pressed)

red LED when IR command is transmitted (as long as button is pressed)
2 manual pairing

power on STB / plug in USB dongle (in case usb dongle is used)

press "On Demand" and "Play/Pause" keys for 3 sec to start pairing process (continues
red flashing)
 LED will stop flashing red if pairing was successful

to delete pairing from remote control press 4 and 6 keys for 3 seconds to delete pairing
 LED will flash 4 times red if paring deletion was successful
3 factory settings

to set remote control back to factory mode press 7 and 9 keys for 3 seconds
 LED will flash 4 times
4 notes

factory default settings: BLE mode (with rstep) and voice enabled

pairing information will remain if batteries are being removed / changed

mode settings will remain if batteries are being removed / changed
2761-515 RCU user guide-2015-11-20.docx
page 2 of 3
copyright 2015 ruwido austria gmbh – this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
DECLARATION
User Information FCC 15.2:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Part 15 Statement. FCC 15.19/RSS Gen Issue 3 Sect. 7.1.3
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Statement Class B Digital Device FCC 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
2761-515 RCU user guide-2015-11-20.docx
page 3 of 3
copyright 2015 ruwido austria gmbh – this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : de-AT
Tagged PDF                      : Yes
Title                           : CONFIDENTIAL
Author                          : Thomas Mirlacher
Creator                         : Microsoft® Word 2010
Create Date                     : 2015:11:20 08:17:23+01:00
Modify Date                     : 2015:11:20 08:17:23+01:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools