shengzhen commercial and trade GDR12 Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3576339
Application ID	xvEr9QSAcewPSzElyZRKyg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.56kB (569536 bits)
Date Submitted	2017-09-23 00:00:00
Date Available	2017-09-23 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Foxit PhantomPDF Printer Version 6.1.0.0923
Document Lastmod	2017-09-16 13:02:30
Document Title	User manual

INSTRUCTIONS TO PROGRAM A REMOTE:
1. Press and release the purple learn button on the back of the motor unit. The light will illuminate for 30
seconds. This indicates the unit is in programming mode.
2. Within 15 seconds press the button you wish to program on the remote control.
3. You will hear an audible click and/or the light on the motor unit will turn off indicating the remote successful
programming.
*Repeat steps 1-3 for any additional remotes you wish to program. Wait 60 seconds before programming another
remote control.
INSTRUCTIONS TO ERASE ALL CODES FROM MEMORY:
Press and hold the purple learn button the back of the motor unit for 6 seconds or until the lght turns off.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This equipment must not be collocated or operating in conjunction with
any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 2
Producer                        : Foxit PhantomPDF Printer Version 6.1.0.0923
Author                          : 
Creator                         : 
Subject                         : 
Title                           : 
Modify Date                     : 2017:09:16 13:02:30+08:00

EXIF Metadata provided by EXIF.tools