skyline security SKSFE1002W 2.4G WIFI Camera User Manual 10
Shenzhen skyline security co.,ltd 2.4G WIFI Camera 10
10 User Manual
Quick Start
2.4G WIFI Camera
SKS-FE1002W
User manual
1Diagram
USB interface: 5V external power supply
Micro SD card slot: For local storage, up to 128G
2Scan to download APP
Visit Apple APP Store or Google Play to download
and install “Showmo” on your smart phone. Launch
the APP and create a new account. Alternatively you
may scan the following QR Code with your smart
phone which will bring you to the site:
（Scan QR code and download）
3Camera connection
Get the camera connected with power and wait until
red light blinks.
Connected your Android or IOS device to your Wi-Fi
and enter Wi-Fi password in APP as guided (5G Wi-Fi
is not available for now), turn on the phone volume
and get it close to the camera. When heard beeping
sound from camera, please tab “next” and wait until
green light blink accompany with the voice “camera
ready” which means connection is done.
Name the camera and enjoy the video.
Q&A
1Why is the camera not connected online?
Please check you have entered the right Wi-Fi
password. Change password if there is any special
symbol.
Make sure DHCP of router is enabled.
4How can I playback recorded video on Micro SD card?
Move the cursor on the time line to the exact date and time,
then can play the recorded video itself.
Instruction
①Indicating light
Stable red Power is on
Blink red Waiting for Wi-Fi password
Stable green Waiting for connection to Internet
Blink green Camera is working
②Working Temperature
The camera is fit for the environment between -5～40℃。
It’s normal if you feel the camera a bit hot when in
working condition.
③Camera reset
User will need to reset the camera when there is a
requirement to:
Change of Wi-Fi name or password.
Change of Wi-Fi router
Change of user to pair with the camera
*Ensure the camera is on working condition.
*Insert the end of a SIM eject tool into the Reset hole on the camera
and Press firmly and push the tool straight.
○4 Package list
Camera
Power adaptor & cable
User’s manual
Product qualified card
APP Illustration
Warranty terms
We are entitled to discontinue the warranty period if
product has been serviced or tempered with by
unauthorized personnel.
We reserve the right to modify the contents of the
product at any time without prior notice.
Unless otherwise specified, this warranty only covers
the defect in material, design and workmanship of the
hardware components of the product as originally
supplied. The warranty does not cover any software,
consumable items, or accessories even if packaged or
sold together with the product.
Note
Please be sure the power is off when remove/insert
micro SD card.
Keep the product out of children’s reach.
Keep it away from direct sunlight, strong light or dust
The camera is suitable for indoor environment; please
keep it away from humidity such as around the
humidifier.
To make the connection well among router, camera
and phone, please ensure the devices are all in the
effective range if Wi-Fi.
FCC Warning:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution: Any changes or modifications to this device not
explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to thefollowing two conditions: (1) This device may not
cause harmful interference, and (2)this device must accept any
interference received, including interference that maycause
undesired operation.
To comply with FCC RF exposure compliance requirements, this
grant is applicable to only mobile configurations. The antennas
used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or
transmitter.