Symantec Getting Started Guide For Symantec™ Endpoint Protection Small Business Edition 12.0 QSG SEPSBE12.0

User Manual: symantec Endpoint Protection - 12.0 - Getting Started Guide Free User Guide for Symantec Endpoint Protection Software, Manual

Open the PDF directly: View PDF PDF.
Page Count: 14

Getting Started Guide for
SymantecEndpoint
Protection Small Business
Edition
The software described in this book is furnished under a license agreement and may be used
only in accordance with the terms of the agreement.
Documentation version 12.00.00.00.00
PN: 20015344
Legal Notice
Copyright © 2009 Symantec Corporation. All rights reserved.
Symantec, the Symantec Logo, LiveUpdate, TruScan, and Symantec Protection Center are
trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners.
This Symantec product may contain third party software for which Symantec is required
to provide attribution to the third party (Third Party Programs). Some of the Third Party
Programs are available under open source or free software licenses. The License Agreement
accompanying the Software does not alter any rights or obligations you may have under
those open source or free software licenses. Please see the Third Party Legal Notice Appendix
to this Documentation or TPIP ReadMe File accompanying this Symantec product for more
information on the Third Party Programs.
The product described in this document is distributed under licenses restricting its use,
copying, distribution, and decompilation/reverse engineering. No part of this document
may be reproduced in any form by any means without prior written authorization of
Symantec Corporation and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS,
REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,
ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO
BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING,
PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED
IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software
as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19
"Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights in
Commercial Computer Software or Commercial Computer Software Documentation", as
applicable, and any successor regulations. Any use, modification, reproduction release,
performance, display or disclosure of the Licensed Software and Documentation by the U.S.
Government shall be solely in accordance with the terms of this Agreement.
Symantec Corporation
20330 Stevens Creek Blvd.
Cupertino, CA 95014
http://www.symantec.com
Printed in the United States of America.
10987654321
Technical Support
Symantec Technical Support maintains support centers globally. Technical
Supports primary role is to respond to specific queries about product features
and functionality. The Technical Support group also creates content for our online
Knowledge Base. The Technical Support group works collaboratively with the
other functional areas within Symantec to answer your questions in a timely
fashion. For example, the Technical Support group works with Product Engineering
and Symantec Security Response to provide alerting services and virus definition
updates.
Symantecs maintenance offerings include the following:
A range of support options that give you the flexibility to select the right
amount of service for any size organization
Telephone and Web-based support that provides rapid response and
up-to-the-minute information
Upgrade assurance that delivers automatic software upgrade protection
Global support that is available 24 hours a day, 7 days a week
Advanced features, including Account Management Services
For information about Symantecs Maintenance Programs, you can visit our Web
site at the following URL:
www.symantec.com/techsupp/
Contacting Technical Support
Customers with a current maintenance agreement may access Technical Support
information at the following URL:
www.symantec.com/techsupp/
Before contacting Technical Support, make sure you have satisfied the system
requirements that are listed in your product documentation. Also, you should be
at the computer on which the problem occurred, in case it is necessary to replicate
the problem.
When you contact Technical Support, please have the following information
available:
Product release level
Hardware information
Available memory, disk space, and NIC information
Operating system
Version and patch level
Network topology
Router, gateway, and IP address information
Problem description:
Error messages and log files
Troubleshooting that was performed before contacting Symantec
Recent software configuration changes and network changes
Licensing and registration
If your Symantec product requires registration or a license key, access our technical
support Web page at the following URL:
www.symantec.com/techsupp/
Customer service
Customer service information is available at the following URL:
www.symantec.com/techsupp/
Customer Service is available to assist with the following types of issues:
Questions regarding product licensing or serialization
Product registration updates, such as address or name changes
General product information (features, language availability, local dealers)
Latest information about product updates and upgrades
Information about upgrade assurance and maintenance contracts
Information about the Symantec Buying Programs
Advice about Symantec's technical support options
Nontechnical presales questions
Issues that are related to CD-ROMs or manuals
Maintenance agreement resources
If you want to contact Symantec regarding an existing maintenance agreement,
please contact the maintenance agreement administration team for your region
as follows:
contractsadmin@symantec.comAsia-Pacific and Japan
semea@symantec.comEurope, Middle-East, and Africa
supportsolutions@symantec.comNorth America and Latin America
Additional enterprise services
Symantec offers a comprehensive set of services that allow you to maximize your
investment in Symantec products and to develop your knowledge, expertise, and
global insight, which enable you to manage your business risks proactively.
Enterprise services that are available include the following:
These solutions provide early warning of cyber attacks, comprehensive threat
analysis, and countermeasures to prevent attacks before they occur.
Symantec Early Warning Solutions
These services remove the burden of managing and monitoring security devices
and events, ensuring rapid response to real threats.
Managed Security Services
Symantec Consulting Services provide on-site technical expertise from
Symantec and its trusted partners. Symantec Consulting Services offer a variety
of prepackaged and customizable options that include assessment, design,
implementation, monitoring, and management capabilities. Each is focused on
establishing and maintaining the integrity and availability of your IT resources.
Consulting Services
Educational Services provide a full array of technical training, security
education, security certification, and awareness communication programs.
Educational Services
To access more information about Enterprise services, please visit our Web site
at the following URL:
www.symantec.com
Select your country or language from the site index.
Getting Started
This document includes the following topics:
About Symantec Endpoint Protection Small Business Edition
Planning the installation
What's included in Symantec Endpoint Protection Small Business Edition
System requirements
Where to get more information about Symantec Endpoint Protection Small
Business Edition
About Symantec Endpoint Protection Small Business
Edition
Symantec Endpoint Protection Small Business Edition combines virus protection
with advanced threat protection to proactively secure your computers against
known and unknown threats.
Symantec Endpoint Protection Small Business Edition is a client-server solution
that protects the client computers in your network. Providing low maintenance
and high power, Symantec Endpoint Protection Small Business Edition
communicates over your network to automatically safeguard computers against
viruses and security threats.
Planning the installation
This topic describes the high-level process for installing Symantec Endpoint
Protection Small Business Edition.
Note: See the Implementation Guide for Symantec Endpoint Protection Small
Business Edition for comprehensive instructions for planning, installing, and
configuring the product.
Table 1-1 summarizes the installation steps for Symantec Endpoint Protection
Small Business Edition.
Table 1-1 Installation planning
DescriptionActionStep
Identify the computers on which you want to install Symantec Endpoint
Protection Small Business Edition.
Plan network
architecture
Step 1
Purchase a license within 30 days of product installation.Review product license
requirements
Step 2
Make sure your computers comply with the minimum system requirements.
See System requirementson page 11.
Review system
requirements
Step 3
Uninstall other virus protection software from your computers.
Symantec does not recommend that you run two virus protection programs on
the same computer. Follow your company's procedure to uninstall the other
software before installing Symantec Endpoint Protection Small Business Edition.
For example, you can use Windows Add or Remove Programs to uninstall the
program.
Prepare computers for
installation
Step 4
Identify the user names, passwords, email addresses, and other installation
settings. Have the information on hand during the installation.
Identify installation
settings
Step 5
Install Symantec Protection Center.Install serverStep 6
Optionally migrate policy and group settings from your Symantec legacy virus
protection software.
Migrate Symantec legacy
virus protection software
Step 7
Prepare for client installation as follows:
Identify the methods to use to deploy the client software to your computers.
Uninstall third-party virus protection software from your computers.
Modify or disable the firewall settings on your computers.
Prepare your computers for remote client deployment.
Set up the console computer groups to match your organizational structure.
Prepare computers for
client installation
Step 8
Getting Started
Planning the installation
8
Table 1-1 Installation planning (continued)
DescriptionActionStep
Install the Symantec Endpoint Protection Small Business Edition client on your
unprotected computers.
Symantec recommends that you also install the client on the computer that
hosts Symantec Protection Center.
Install clientsStep 9
Identify the tasks that you want to perform after you install Symantec Endpoint
Protection Small Business Edition.
The post-installation tasks include the following tasks:
Install additional clients, if necessary.
Migrate Symantec legacy virus protection software if you did not perform
this task earlier.
Become familiar with the features and functions of the console.
Verify that your client computers are online and protected.
Check the LiveUpdate schedule and adjust if necessary.
Check notifications.
Set up computer groups.
Create additional administrator accounts.
Register your product serial number, and import your license file into the
console.
Identify post-installation
tasks
Step 10
What's included in Symantec Endpoint Protection
Small Business Edition
Table 1-2 lists the Symantec Endpoint Protection Small Business Edition
components.
9Getting Started
What's included in Symantec Endpoint Protection Small Business Edition
Table 1-2 Product components
DescriptionComponent
Symantec Protection Center centrally manages the
client computers that connect to your company's
network.
Symantec Protection Center comprises the following
software:
The console software coordinates and manages
security policies and client computers.
The server software provides secure communication
to and from the client computers and the console.
Symantec Protection Center
A database stores security policies, events, and product
licenses. The database is installed on the computer that
hosts Symantec Protection Center.
Database
The Symantec Endpoint Protection Small Business
Edition client enforces virus and other protection
technologies on the client computers. It runs on the
servers, desktops, and portable computers that you want
to protect.
Symantec Endpoint Protection
Small Business Edition client
Getting Started
What's included in Symantec Endpoint Protection Small Business Edition
10
Figure 1-1 Symantec Endpoint Protection Small Business Edition components
Firewall
Computers running the
Symantec Endpoint
Protection Small
Business Edition client,
connecting through a
VPN tunnel
Internet
Local Ethernet Network
Symantec Protection Center, with
the Symantec Endpoint
Protection Small Business Edition
client installed
Computers running the Symantec
Endpoint Protection Small
Business Edition client
System requirements
Symantec Endpoint Protection Small Business Edition requires specific operating
systems and hardware. All the computers on which you install the product should
meet or exceed the recommended system requirements.
The Symantec Protection Center system requirements are as follows:
32-bit processor: 1-GHz Intel Pentium III or equivalent minimum (Intel Pentium
4 or equivalent recommended)
64-bit processor : 2-GHz Pentium 4 with x86-64 support or equivalent minimum
Intel Itanium IA-64 is not supported.
Operating systems: Windows 2000 Server, Windows XP (32-bit, 64-bit),
Windows Server 2003 (32-bit, 64-bit), Windows Server 2008 (32-bit, 64-bit),
11Getting Started
System requirements
Windows Small Business Server 2008 (64-bit), or Windows Essential Business
Server 2008 (64-bit)
Windows Vista (32-bit, 64-bit) is not officially supported.
RAM memory: 1 GB of RAM minimum (2 GB of RAM recommended)
Hard disk: 4 GB or more free space
The client system requirements are as follows:
32-bit processor: 1-GHz Intel Pentium III or equivalent minimum (Intel Pentium
4 or equivalent recommended)
64-bit processor: 2-GHz Pentium 4 with x86-64 support or equivalent minimum
Intel Itanium IA-64 is not supported.
Operating systems: Windows 2000 Professional/Server, Windows XP (32-bit,
64-bit), Windows XP Embedded , Windows Vista (32-bit, 64-bit), Windows
Server 2003 (32-bit, 64-bit), Windows Server 2008 (32-bit, 64-bit), Windows
Small Business Server 2008 (64-bit), or Windows Essential Business Server
2008 (64-bit)
RAM memory: 256 MB of RAM minimum (1 GB of RAM recommended)
Hard disk: 700 MB or more free space
Browser: Internet Explorer 6 or later
The Remote Push Installation client deployment method does not verify that
Internet Explorer 6.0 or later is installed on computers. If the computers do
not have the correct version of Internet Explorer, the installation fails without
warning.
Where to get more information about Symantec
Endpoint Protection Small Business Edition
Symantec Endpoint Protection Small Business Edition includes the following
sources of information:
Getting Started Guide for Symantec Endpoint Protection Small Business Edition
Implementation Guide for Symantec Endpoint Protection Small Business Edition
Client Guide for Symantec Endpoint Protection Small Business Edition
Remote Installation Troubleshooting
This file includes background information on the Push Deployment Wizard.
The Push Deployment Wizard helps you deploy the client software on
computers remotely from a computer that does not run Symantec Protection
Getting Started
Where to get more information about Symantec Endpoint Protection Small Business Edition
12
Center. You can find the tool in the Tools\PushDeploymentWizard folder of
the product disc.
Symantec Client Firewall Policy Migration Guide
This guide includes information on how to convert policies from Symantec
Client Firewall Administrator to Symantec Protection Center.
Readme for Symantec Endpoint Protection Small Business Edition
Online Help for Symantec Protection Center
Online Help for the Symantec Endpoint Protection Small Business Edition
client
The user documentation might be updated between product releases.
You can locate the latest user documentation at the Symantec Technical Support
Web site.
Technical Support resources
Table 1-3 lists the Symantec Web sites where you can find more information .
Table 1-3 Symantec Web sites
Web addressTypes of information
http://www.symantec.com/business/products/
downloads/
Symantec Endpoint Protection Small
Business Edition trialware
http://www.symantec.com/business/support/
overview.jsp?pid=55357
Public Knowledge Base
Releases
Manuals and documentation updates
Contact options
Release Notes and additional
post-release information
http://securityresponse.symantec.comVirus and other threat information
and updates
http://enterprisesecurity.symantec.comProduct news and updates
http://www.symantec.com/communitySymantec Endpoint Protection Small
Business Edition forums
http://www.symantec.com/education/
endpointsecurity
Free online technical training
13Getting Started
Where to get more information about Symantec Endpoint Protection Small Business Edition
Getting Started
Where to get more information about Symantec Endpoint Protection Small Business Edition
14

Navigation menu