think dig High Tech Solutions OM9401US Data Transceiver User Manual thd BA E orderman 1196
think dig High Tech Solutions GmbH Data Transceiver thd BA E orderman 1196
Manual
t h i n k H i g h d i g T e c h O R D E R M A N® t h i n k S o l u t i o n s H i g h d i g T e c h O R D E R M A N® S o l u t i o n s O R D E R M A N® O R D E R M A N® Operating Manual Operating Manual Your Customer Service: Your Customer Service: t h i n k Edition 11/96 H i g h d i g T e c h S o l u t i o n s t h i n k Edition 11/96 H i g h d i g T e c h S o l u t i o n s O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s CERTIFICATE OF APPROVAL t h i n k H i g h d i g T e c h O R D E R M A N® O R D E R M A N® t h i n k S o l u t i o n s H i g h CONTENTS d i g T e c h S o l u t i o n s CERTIFICATE OF APPROVAL Contents.....................................................................2 General Information ...................................................3 Safety Instructions.....................................................4 Technical Data............................................................5 Keyboard....................................................................6 Display .......................................................................7 Setup Menu................................................................8 Setting-into-Operation .............................................12 Power Supply...........................................................13 Operation .................................................................15 Maintenance.............................................................16 Certificate of Approval..............................................17 Model Plaques .........................................................17 Authorization for Usage in... ................................... 18 Germany: Austria: G117 521F FW funkzugelassen CEPT LPD A ORDERMAN MODEL PLAQUE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to user: Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Germany: Austria: G117 521F FW funkzugelassen CEPT LPD A ORDERMAN MODEL PLAQUE d i g T e c h O R D E R M A N® S o l u t i o n s CONTENTS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to user: Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. O R D E R M A N® Type: OM-9401 S/N: B SB Made in Austria nur mitgeliefertes Steckernetzgerät verwenden use specified charger only think dig High Tech Solutions GmbH Type: OM-9401 S/N: B SB Made in Austria nur mitgeliefertes Steckernetzgerät verwenden use specified charger only think dig High Tech Solutions GmbH STORAGE BATTERY MODEL PLAQUE STORAGE BATTERY MODEL PLAQUE Type: OMP-9401 S/N: A12693SB NI-CD BATTERY PACK 7,2V 600mAh Use specified chargers only. Do not shortcircuit. May explode if disposed of in fire Page 17 H i g h Contents.....................................................................2 General Information ...................................................3 Safety Instructions.....................................................4 Technical Data............................................................5 Keyboard....................................................................6 Display .......................................................................7 Setup Menu................................................................8 Setting-into-Operation .............................................12 Power Supply...........................................................13 Operation .................................................................15 Maintenance.............................................................16 Certificate of Approval..............................................17 Model Plaques .........................................................17 Authorization for Usage in... ................................... 18 O R D E R M A N® Certificates, Plaques t h i n k Type: OMP-9401 S/N: A12693SB NI-CD BATTERY PACK 7,2V 600mAh Use specified chargers only. Do not shortcircuit. May explode if disposed of in fire Contents Page 2 Certificates, Plaques Page 17 Contents Page 2 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s OPERATING Never hold the Orderman in the area of the integrated antenna. This could lead to range impairments. Placement on a Tray t h i n k H i g h d i g T e c h O R D E R M A N® O R D E R M A N® t h i n k S o l u t i o n s H i g h SAFETY INSTRUCTIONS d i g T e c h S o l u t i o n s OPERATING d i g T e c h O R D E R M A N® S o l u t i o n s SAFETY INSTRUCTIONS Carefully read through this operating manual before setting the Orderman into operation. The Orderman is only to be run with the supplied storage battery and power pack. The Orderman is only to be run with the supplied storage battery and power pack. The Orderman complies with CE-guidelines and has the approval of the Federal Bureau for Approval in Telecommunication. The Orderman complies with CE-guidelines and has the approval of the Federal Bureau for Approval in Telecommunication. Warning Warning The Orderman should never be exposed to rain, hale or snow fall. The Orderman should never be exposed to rain, hale or snow fall. The Orderman is not to be disassembled. There are no parts inside the Orderman which can be serviced by a non-specialist. Contact Customer Service for repairs. Never hold the Orderman in the area of the integrated antenna. This could lead to range impairments. Placement on a Tray Always place the Orderman with the storage battery side on the tray. The Orderman is waterproof up to a height of 10 mm. Free Fall Free Fall Experiments with free falling from a height of approx. 1 - 1.2 meters merely left damage to the surface (cracks) of the housing. The Orderman remains functional. Experiments with free falling from a height of approx. 1 - 1.2 meters merely left damage to the surface (cracks) of the housing. The Orderman remains functional. Page 15 H i g h Carefully read through this operating manual before setting the Orderman into operation. Always place the Orderman with the storage battery side on the tray. The Orderman is waterproof up to a height of 10 mm. Maintenance t h i n k Safety Instructions Page 4 Maintenance Page 15 The Orderman is not to be disassembled. There are no parts inside the Orderman which can be serviced by a non-specialist. Contact Customer Service for repairs. Safety Instructions Page 4 O R D E R M A N® t h i n k H i g h d i g T e c h t h i n k S o l u t i o n s POWER SUPPLY H i g h d i g T e c h O R D E R M A N® O R D E R M A N® t h i n k S o l u t i o n s H i g h KEYBOARD d i g T e c h POWER SUPPLY The power supply takes place by means of a storage battery. The power supply takes place by means of a storage battery. Inserting the storage battery Inserting the storage battery Description of the Keyboard Insert the storage battery without force. Permanent service life The keyboard can be randomly configurated from the application program. For the exact function and usage of the individual keys, refer to the description of the application program. Insert the storage battery without force. - without backlight ...................... approx. 12 hours Before the storage battery is completely discharged, the storage battery's warning symbol on the display begins to blink. This serves as notification that the storage battery is to be recharged or replaced. Power Supply Page 13 d i g T e c h O R D E R M A N® S o l u t i o n s KEYBOARD The keyboard can be randomly configurated from the application program. For the exact function and usage of the individual keys, refer to the description of the application program. ON .......................................................... ON/OFF key ON .......................................................... ON/OFF key Key name and definition: Key name and definition: F ............................................................. function key F ............................................................. function key SPLIT ............................................................ splitting SPLIT ............................................................ splitting - ....................................................................... minus - ....................................................................... minus .................................................................. upwards .................................................................. upwards TOTAL ................................................................. total TOTAL ................................................................. total CANCEL ........................................................... cancel PRINT ................................................................. print ............................................................. downwards ST .................................................................. subtotal Never touch the contacts on the Orderman - risk of breakage ! Permanent service life ...................................................... choice of table - with backlight ............... approx. 2 hours, 40 min H i g h Description of the Keyboard ST .................................................................. subtotal Never touch the contacts on the Orderman - risk of breakage ! t h i n k S o l u t i o n s - with backlight ............... approx. 2 hours, 40 min ........................................................ price look up - without backlight ...................... approx. 12 hours ..................................................................... clear ................................................ digit keysten ....................................................... enter, confirm Keyboard Page 6 PRINT ................................................................. print ............................................................. downwards ...................................................... choice of table ........................................................ multiplication ................................................................. comma CANCEL ........................................................... cancel Before the storage battery is completely discharged, the storage battery's warning symbol on the display begins to blink. This serves as notification that the storage battery is to be recharged or replaced. Power Supply Page 13 ........................................................ multiplication ........................................................ price look up ................................................................. comma ..................................................................... clear ................................................ digit keysten ....................................................... enter, confirm Keyboard Page 6 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s With the key, the display of both arrows can be switched on/off. If the arrows are displayed, the time for the automatic switch-off can be modified through the keys Intervals of 1 to 7 minutes can be set. „-“ means that the switch-off function is deactivated. t h i n k H i g h d i g T e c h O R D E R M A N® O R D E R M A N® t h i n k S o l u t i o n s H i g h d i g T e c h S o l u t i o n s O R D E R M A N® S o l u t i o n s The setup menu serves to set the background lighting, contrast, automatic switch-off and the radio channels. The setup menu is accessed by pressing the key during which the ON key is slightly pressed, turning on the Orderman. The setup menu serves to set the background lighting, contrast, automatic switch-off and the radio channels. The setup menu is accessed by pressing the key during which the ON key is slightly pressed, turning on the Orderman. The following image appears: With the key, the display of both arrows can be switched on/off. If the arrows are displayed, the time for the automatic switch-off can be modified through the keys Intervals of 1 to 7 minutes can be set. „-“ means that the switch-off function is deactivated. The following image appears: Exit SNR ................................... Orderman's serial number SNR ................................... Orderman's serial number 22° ............................................ internal temperature 22° ............................................ internal temperature 7.8V .............................. voltage of the storage battery 7.8V .............................. voltage of the storage battery channel...................................... transmission channel channel...................................... transmission channel backlight...................................... background lighting backlight...................................... background lighting power-off.................................... automatic switch-off exit .............................................................. terminate The individual points can be selected by the keys and confirmed by contrast.......................................... contrast light/dark After having made the required changes, move the pointer to the „exit“ field and confirm with The question „save“ appears: Setting the Channels The Orderman now starts normal operation. d i g T e c h SETUP MENU contrast .......................................... contrast light/dark 1 for yes ............. changes are permanently stored 0 for no ...........changes are not permanently stored, but remain active until switch-off. H i g h SETUP MENU Exit After having made the required changes, move the pointer to the „exit“ field and confirm with The question „save“ appears: t h i n k power-off.................................... automatic switch-off exit .............................................................. terminate The individual points can be selected by the keys and confirmed by Setting the Channels Attention: The channels are determined during installation and may not be changed, as otherwise the radio connection is interfered with ! 1 for yes ............. changes are permanently stored 0 for no ...........changes are not permanently stored, but remain active until switch-off. The Orderman now starts normal operation. Attention: The channels are determined during installation and may not be changed, as otherwise the radio connection is interfered with ! The radio channels of all radio frequency basis The radio channels of all radio frequency basis stations to be found in the system must be entered in the channel list (but no others). stations to be found in the system must be entered in the channel list (but no others). Setup Setup Setup Setup Page 11 Page 8 Page 11 Page 8 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s t h i n k H i g h O R D E R M A N® d i g T e c h O R D E R M A N® t h i n k S o l u t i o n s H i g h d i g T e c h S o l u t i o n s t h i n k H i g h S o l u t i o n s AUTHORIZATION FOR USAGE IN AUTHORIZATION FOR USAGE IN Austria Austria GZ412120-ZB/94 GZ358967-ZB/95 GZ412120-ZB/94 GZ358967-ZB/95 Germany G117521F Germany G117521F Switzerland BAKOM 95.0394.K.P. Switzerland BAKOM 95.0394.K.P. Denmark ALR 9539 TELESTYRELSEN Denmark ALR 9539 TELESTYRELSEN GREECE EK 394 Greece Greece GREECE EK 395 Belgium GREECE EK 394 GREECE EK 395 RTT/D/X1219 Belgium RTT/D/X1219 The Netherlands NL95092270 The Netherlands NL95092270 NL95092271 NL95092271 Copyright by think dig High Tech Solutions Gmbh Copyright by think dig High Tech Solutions Gmbh All rights reserved All rights reserved It is illegal to reproduce, copy, distribute or translate this text or any parts of it without the permission of think dig High Tech Solution Gmbh. It is illegal to reproduce, copy, distribute or translate this text or any parts of it without the permission of think dig High Tech Solution Gmbh. We reserve the right to make any technical modifications. We reserve the right to make any technical modifications. Authorization for Usage in ... Page 1 O R D E R M A N® d i g T e c h Page 18 Authorization for Usage in ... Page 1 Page 18 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s t h i n k H i g h d i g T e c h O R D E R M A N® O R D E R M A N® t h i n k S o l u t i o n s H i g h d i g T e c h S o l u t i o n s t h i n k H i g h d i g T e c h GENERAL INFORMATION MAINTENANCE GENERAL INFORMATION MAINTENANCE The Orderman has been specially designed for the food & beverage industry. It is an electronic radio ordering pad component of an ordering system. High Temperatures The Orderman has been specially designed for the food & beverage industry. It is an electronic radio ordering pad component of an ordering system. High Temperatures An ordering system, at a minimum, consists of an Orderman, a radio frequency basis station and a host computer with an application program. The application program on the host computer controls the entire dialog to the Orderman. Only the standard unit is described in this manual. If the manufacturer of the utilized application program had his requirements adapted to the unit, refer to this in the description of the application program. General Information Page 3 Do not expose the Orderman to extremely warm irradiation (i.e., direct sun light, heaters). An ordering system, at a minimum, consists of an Orderman, a radio frequency basis station and a host computer with an application program. Repairs Never attempt to disassemble the Orderman. There are no parts in the interior which can be serviced by a non-expert. Contacts Never touch the contacts on the Orderman - danger of breakage. The application program on the host computer controls the entire dialog to the Orderman. Only the standard unit is described in this manual. If the manufacturer of the utilized application program had his requirements adapted to the unit, refer to this in the description of the application program. O R D E R M A N® S o l u t i o n s Do not expose the Orderman to extremely warm irradiation (i.e., direct sun light, heaters). Repairs Never attempt to disassemble the Orderman. There are no parts in the interior which can be serviced by a non-expert. Contacts Never touch the contacts on the Orderman - danger of breakage. Cleaning Cleaning Wipe off the Ordermann with a clean, soft cloth. Never use any cleaning agents, chemicals or compressed air to remove dust. Wipe off the Ordermann with a clean, soft cloth. Never use any cleaning agents, chemicals or compressed air to remove dust. Liquids Liquids The Orderman is splashproof (IP 54) and liquidresistant up to the seam. If any liquid penetrates into the Orderman, it can become damaged in this way. Should liquid have penetrated into the unit, it must be examined by our Customer Service for any possible damages. The Orderman is splashproof (IP 54) and liquidresistant up to the seam. If any liquid penetrates into the Orderman, it can become damaged in this way. Should liquid have penetrated into the unit, it must be examined by our Customer Service for any possible damages. Maintenance Page 16 General Information Page 3 Maintenance Page 16 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s t h i n k H i g h d i g T e c h O R D E R M A N® O R D E R M A N® t h i n k S o l u t i o n s H i g h d i g T e c h S o l u t i o n s TECHNICAL DATA TECHNICAL DATA Splashproof ....................................................... IP 54 Splashproof ....................................................... IP 54 Integrated antenna within the display area Integrated antenna within the display area Frequency range............ 433.050 MHz - 434.790 MHz Operating frequency ..... 433.175 MHz - 434.650 MHz Frequency range ............ 433.050 MHz - 434.790 MHz Operating frequency ..... 433.175 MHz - 434.650 MHz Radio output ............................................ less 10 mW (compare with radio telephone up to 600 mW) Signalling frequency ................................. 9,600 baud Range - in buildings ........................................... up to 50 m Planar occulation ............................ up to 7,800 m2 Note: Building construction and metal parts could influence the range. Nominal voltage of the storage battery ............... 7.2 V Service life of the storage battery - permanent with „backlight“ .. up to 2 hours, 40 min - without „backlight“ ......................... up to 12 hours Recharging the Storage Battery Radio output ............................................ less 10 mW (compare with radio telephone up to 600 mW) The recharging of the storage battery takes place by plugging in the power pack. The unit can be used during the loading procedure. The loading time of a completely discharged storage battery amounts to a max. of 6 hours. During the charging process, the red light in the „0“ key lights up (when viewing, can be dimmed by placing a hand over it). When the red light begins to blink, the charging process is ended (Compensation operation to off-set self-discharging). Signalling frequency ................................. 9,600 baud Range - in buildings ........................................... up to 50 m Planar occulation ............................ up to 7,800 m2 Note: Building construction and metal parts could influence the range. Nominal voltage of the storage battery ............... 7.2 V Service life of the storage battery - permanent with „backlight“ .. up to 2 hours, 40 min - without „backlight“ ......................... up to 12 hours Storage battery's charging time with - power pack on the Ordermann .......... max. 6 hours - charging station ..................... max. 1 hour, 30 min Storage battery's charging time with - power pack on the Ordermann .......... max. 6 hours - charging station ..................... max. 1 hour, 30 min Dimensions ................ 90 (W) x 190 (W) x 28(D) mm Dimensions ................ 90 (W) x 190 (W) x 28(D) mm t h i n k H i g h d i g T e c h O R D E R M A N® S o l u t i o n s Recharging the Storage Battery The recharging of the storage battery takes place by plugging in the power pack. The unit can be used during the loading procedure. The loading time of a completely discharged storage battery amounts to a max. of 6 hours. During the charging process, the red light in the „0“ key lights up (when viewing, can be dimmed by placing a hand over it). When the red light begins to blink, the charging process is ended (Compensation operation to off-set self-discharging). Weight of the storage battery ............................ 390 g General Advice Weight of the storage battery ............................ 390 g General Advice Operating temperature range ............. -10°C to +40°C Never short-circuit the contact surfaces of the storage battery! Do not open the storage battery's housing! Only the storage battery in our supply range is to be used. In order to avoide short circuiting, do not overheat the storage battery. Do not place the storage battery in an open fire danger of explosion! If the Orderman is not being used for a longer period of time, remove the storage battery and store it in a cool, dry place. The serice life of the storage battery can be extended by occasionally using the Orderman up to the storage battery's warning. A defective storage battery is to be disposed of according to the local authorities'regulations for NiCd batteries. Operating temperature range ............. -10°C to +40°C Never short-circuit the contact surfaces of the storage battery! Do not open the storage battery's housing! Only the storage battery in our supply range is to be used. In order to avoide short circuiting, do not overheat the storage battery. Do not place the storage battery in an open fire danger of explosion! If the Orderman is not being used for a longer period of time, remove the storage battery and store it in a cool, dry place. The serice life of the storage battery can be extended by occasionally using the Orderman up to the storage battery's warning. A defective storage battery is to be disposed of according to the local authorities'regulations for NiCd batteries. Power pack - input voltage ...................... 220-240 V ~, 50-60 Hz - max. power consumption from power supply ........................... 84mA/19.4VA Number of the Certificate of Approval from the Federal Bureau for Approvals inTelecommunication (GFR) ................ G117521F FW Supplied Accessories 1 operating manual 1 power pack 1 storage battery Technical Data Page 5 Power Supply Page 14 Power pack - input voltage ...................... 220-240 V ~, 50-60 Hz - max. power consumption from power supply ........................... 84mA/19.4VA Number of the Certificate of Approval from the Federal Bureau for Approvals inTelecommunication (GFR) ................ G117521F FW Supplied Accessories 1 operating manual 1 power pack 1 storage battery Technical Data Page 5 Power Supply Page 14 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s Special Keys The display contrast can be modified by combining the following keys: ON + ............................................. increase contrast ON + ............................................ decrease contrast t h i n k H i g h O R D E R M A N® d i g T e c h O R D E R M A N® t h i n k S o l u t i o n s H i g h SETTING-INTO-OPERATION d i g T e c h S o l u t i o n s Special Keys Setting-into-operation takes place by quickly pressing the ON key. The following display appears: The display contrast can be modified by combining the following keys: ON + ............................................. increase contrast ON + ............................................ decrease contrast This modification is not permanently stored and is only valid until switching off the Orderman. For a permanent modification,see the chapter "Set-up Menu". This modification is not permanently stored and is only valid until switching off the Orderman. For a permanent modification,see the chapter "Set-up Menu". DISPLAY DISPLAY Setting-into-operation takes place by quickly pressing the ON key. The following display appears: V1.51E ............................................. Software version Before the first setting-into-operation, verify the settings in the Setup menu. No radio connection No radio connection If no radio connection to a radio frequency basis station exists (i.e., outside of the radio range), digits appear on the display in the upper right-hand corner. If no radio connection to a radio frequency basis station exists (i.e., outside of the radio range), digits appear on the display in the upper right-hand corner. - 6 x 8 matrix - 8 x 14 matrix These display the radio channel change. The Orderman attempts to pick up radio connection to a radio frequency basis station. Depending on the lettering and its size, up to 8 lines with 21 characters each can be displayed. These display the radio channel change. The Orderman attempts to pick up radio connection to a radio frequency basis station. Graphics can likewise be shown on the display. Graphics can likewise be shown on the display. Page 7 SETTING-INTO-OPERATION Before the first setting-into-operation, verify the settings in the Setup menu. - 8 x 14 matrix Display S o l u t i o n s V1.51E ............................................. Software version - 6 x 8 matrix The display can be randomly controlled from the application program on the host computer. Refer to the description of the application program on the different display layouts (input masks, etc.) O R D E R M A N® d i g T e c h SNR ...........................s erial number of the Orderman 2 sizes of lettering are available: General Reference H i g h SNR ...........................s erial number of the Orderman 2 sizes of lettering are available: Depending on the lettering and its size, up to 8 lines with 21 characters each can be displayed. t h i n k Note: Inverse-displayed digits can also mean that the entered data cannot be accepted by the host computer. Setting-into-Operation Page 12 General Reference The display can be randomly controlled from the application program on the host computer. Refer to the description of the application program on the different display layouts (input masks, etc.) Display Page 7 Note: Inverse-displayed digits can also mean that the entered data cannot be accepted by the host computer. Setting-into-Operation Page 12 O R D E R M A N® t h i n k H i g h d i g T e c h S o l u t i o n s This is the only way to guarantee that the Orderman is functioning perfectly in the entire area. The order and position of the entries is of no importance. t h i n k H i g h O R D E R M A N® d i g T e c h O R D E R M A N® t h i n k S o l u t i o n s - 1-99 secounds by the keys H i g h and d i g T e c h S o l u t i o n s This is the only way to guarantee that the Orderman is functioning perfectly in the entire area. The order and position of the entries is of no importance. The following keys are available: The following keys are available: ............alternate between „move“ and „change“ , ........Pointer moves when „move“ is indicated. Radio channel setting is changed one time each when „change“ is indicated „-, print“....Radio channel setting is changed ten times when „change“ is indicated. ..........Radio channel setting is cancelled at the present pointer position. ............alternate between „move“ and „change“ ........Pointer moves when „move“ is indicated. Radio channel setting is changed one time each when „change“ is indicated „-, print“....Radio channel setting is changed ten times when „change“ is indicated. ..........Radio channel setting is cancelled at the present pointer position. t h i n k H i g h O R D E R M A N® d i g T e c h S o l u t i o n s - 1-99 secounds by the keys and Setting of Contrast Setting of Backlight Setting of Contrast Setting of Backlight With the key, the display of both arrows can be With the key, the display of both arrows can be switched on/off. If the arrows are displayed, the switched on/off. If the arrows are displayed, the contrast can be changed through the contrast can be changed through the keys. The result can be seen immediately on the display. keys. The result can be seen immediately on the display. The background lighting can be set by the key as follows: - always on ....................................... always in operation The background lighting can be set by the key as follows: - always on ....................................... always in operation Setting of Power-off Setting of Power-off - off ......................................................... always shut off - off ......................................................... always shut off After expiration of the set time, the automatic switch- After expiration of the set time, the automatic switch- off disconnects after the Orderman's last key off disconnects after the Orderman's last key depression. depression. Setup Setup Setup Setup Page 9 Page 10 Page 9 Page 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2000:02:03 10:48:20 Producer : Acrobat Distiller 3.01 für Power Macintosh Author : 8500er Creator : QuarkXPressª 3.32: LaserWriter 8 D1-8.5.1 Title : thd_BA_E_orderman_1196 Modify Date : 2001:04:06 12:21:57+02:00 Page Count : 10 Page Mode : UseThumbs Page Layout : SinglePage Has XFA : NoEXIF Metadata provided by EXIF.tools