u blox 04 BMD-30X User Manual BMD 300

Rigado LLC BMD-30X BMD 300

UserManual.wiki >

User Manual

BMD-300-DS-V0.9.4 Page 1 of 25 Rigado LLC 3950 Fairview Industrial Dr. Salem, Oregon 97302 866-6-RIGADO  modules@rigado.com www.rigado.com/modules BMD-300 Series Module for Bluetooth 4.2 LE The BMD-300 Series from Rigado is a line of powerful, highly flexible, ultra-low power Bluetooth Smart modules based on the nRF52832 SoC from Nordic Semiconductor. With an ARM® Cortex™ M4F CPU, embedded 2.4GHz transceiver, and integrated antenna, they provide a complete RF solution with no additional RF design, allowing faster time to market. Providing full use of the nRF52832’s capabilities and peripherals, the BMD-300 Series can power the most demanding applications, all while simplifying designs and reducing BOM costs. With an internal DC-DC converter and intelligent power control, the BMD-300 Series provide class-leading power efficiency, enabling ultra-low power sensitive applications. Regulatory pre-approvals reduce the burden to enter the market, and the included BMD Software Suite provides access to great features like a secure BLE & UART bootloader, iOS & Android Bluetooth libraries, and more. 1. Features  Based on the Nordic nRF52832 SoC  Complete RF solution with integrated antenna (BMD-300) or U.FL connector (BMD-301)  Integrated DC-DC converter  No external components required  ARM® Cortex™-M4F 32-bit processor  Serial Wire Debug (SWD)  Nordic SoftDevice ready  Over-the-Air (OTA) firmware updates  512kB embedded flash memory  64kB RAM  32 General Purpose I/O Pins  12-bit/200KSPS ADC  -40C to +85 Temperature Range  BMD Software Suite included  FCC: 2AA9B04 (BMD-300/BMD-301)  Three SPI Master/Slave (8 Mbps)  Low power comparator  Temperature sensor  Random Number Generator  Two 2-wire Master/Slave (I2C compatible)  I2S audio interface  UART (w/ CTS/RTS and DMA)  20 channel CPU independent Programmable Peripheral Interconnect (PPI)  Quadrature Demodulator (QDEC)  128-bit AES HW encryption  5 x 32bit, 3 x 24bit Real Timer Counters (RTC)  NFC-A tag interface for OOB pairing  Dimensions: 14 x 9.8 x 1.9mm  IC: 12208A-04 (BMD-300/BMD-301)  Japan: 210-106799 (BMD-300)2. Applications  App-cessories  iBeacons™  Low-Power Sensors  Connected Appliances  Lighting Products  Fitness devices  Wearables

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 2 of 25 3. Ordering Information Email modules@rigado.com for quotes and ordering or visit www.rigado.com/BMD-300 Part Number Description BMD-300-A-CT BMD-300 module, Rev A, Cut Tape BMD-300-A-R BMD-300 module, Rev A, Tape & Reel, 1000 piece multiples BMD-301-A-CT BMD-301 module, Rev A, Cut Tape BMD-301-A-R BMD-301 module, Rev A, Tape & Reel, 1000 piece multiples BMD-300-EVAL-S BMD-300 Evaluation Kit with Segger J-Link programmer BMD-301-EVAL-S BMD-301 Evaluation Kit with Segger J-Link programmer w/antennas Table 1 – Ordering Part Numbers 4. Block Diagram BMD-300 Series Modules32 MHz CrystalnRF52832512kB FlashDC-DC InductorDecoupling CapacitorsBulk Capacitors2.4GHz RadioMulti-protocolTWI Master x2SPI Master x3SPI SlaveX3DC/DC Buck RegulatorCore LDO64kB RAMLow Power Comparator8-ch 12-bit ADCUART Quadrature DecoderSWD Debug & Programming Temperature SensorClock ManagementWatchdog TimerRandom Number GenTimer x5Accel Address ResolverAES CCM Mode EncryptionAES ECBReal Time Counter x3GPIO Task Event BlocksProgrammable Peripheral InterconnectARM Cortex-M4F@ 64MHz Matching NetworkAntenna / U.FLGPIO x32(Analog x8)I2STWI Slave x2 PWM PDMGeneral Purpose ComparatorNFC TagBalun Figure 1 – Block Diagram

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 4 of 25 5. Quick Specifications Bluetooth Version 4.2 (Bluetooth Smart) Concurrent Central & Peripheral (S132) Security AES-128 LE connections up to 8 as Central, or up to 7 as Central and 1 as Peripheral, Observer, Broadcaster (S132) Radio Frequency 2.360GHz to 2.500GHz Modulations GFSK at 1 Mbps, 2 Mbps data rates Transmit power +4 dBm Receiver sensitivity -96 dBm (BLE mode) Antenna Integrated Current Consumption TX only @ +4 dBm, 0 dBm @ 3V, DCDC enabled 7.5 mA, 5.3 mA TX only @ +4 dBm, 0 dBm 16.6 mA, 11.6 mA RX only @ 1 Mbps @ 3V, DCDC enabled 5.4 mA RX only @ 1 Mbps 11.7 mA CPU @ 64MHz from flash, from RAM 7.4 mA, 6.7 mA CPU @ 64MHz from flash, from RAM @ 3V, DCDC 3.7 mA, 3.3 mA System Off , On 0.7µA, 1.2 µA Additional current for RAM retention 20 nA / 4K block Dimensions Length 14.0 mm ± 0.2mm Width 9.8 mm ± 0.2mm Height 1.9 mm ± 0.1mm Hardware Interfaces SPI Master/Slave x 3 UART Two-Wire Master/Slave (I2C) x 2 GPIO x 32 I2S PWM PDM Power supply 1.7V to 3.6V Temperature Range -40 to +85°C Certifications FCC FCC part 15 modular certification BMD-300 FCC ID: 2AA9B04 BMD-301 FCC ID: 2AA9B04 IC Industry Canada RSS-210 modular certification BMD-300 IC: 12208A-04 BMD-301 IC: 12208A-04 CE EN 60950-1: 2011-01 3.1 (a) : Health and Safety of the User EN 301 489-17 V2.2.1 3.1 (b) : Electromagnetic Compatibility EN 300 328 V1.8.1 3.2 :Effective use of spectrum allocated Japan (TELEC) Ministry of Internal Affairs and Communications (MIC) of Japan pursuant to the Radio Act of Japan: 210-106799 Australia / New Zealand AS/NZS 4268 :2012+AMDT 1:2013, Radio equipment and systems – Short range devices Bluetooth RF-PHY Component (Tested) – DID: TBD (March 2016) Table 2 – Quick Specifications

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 5 of 25 6. Pin Descriptions Figure 2 – Pin out (Top View) Pin description Pin Name Direction Description 6 P0.25 In/Out GPIO3 7 P0.26 In/Out GPIO3 8 P0.27 In/Out GPIO3 9 P0.28 In/Out GPIO/AIN43 10 P0.29 In/Out GPIO/AIN53 11 P0.30 In/Out GPIO/AIN63 12 P0.31 In/Out GPIO/AIN73 13 P0.00 In/Out GPIO/XTAL1 (32.768kHz) 14 P0.01 In/Out GPIO/XTAL2 (32.768kHz) 15 P0.02 In/Out GPIO/AIN0 19 P0.03 In/Out GPIO/AIN1 20 P0.04 In/Out GPIO/AIN2 21 P0.05 In/Out GPIO/AIN3 22 P0.06 In/Out GPIO 23 P0.07 In/Out GPIO 24 P0.08 In/Out GPIO 25 P0.09 In/Out GPIO/NFC1 26 P0.10 In/Out GPIO/NFC2 27 P0.11 In/Out GPIO 28 P0.12 In/Out GPIO 31 P0.13 In/Out GPIO 32 P0.14 In/Out GPIO/TRACEDATA[3] 33 P0.15 In/Out GPIO/TRACEDATA[2] 34 P0.16 In/Out GPIO/TRACEDATA[1] 35 P0.17 In/Out GPIO

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 6 of 25 Pin Name Direction Description 36 P0.18 In/Out GPIO/TRACEDATA[0]/SWO 37 P0.19 In/Out GPIO 38 P0.20 In/Out GPIO/TRACECLK 39 P0.21 In/Out GPIO/ RESET̅̅̅̅̅̅̅̅1 40 P0.22 In/Out GPIO3 41 P0.23 In/Out GPIO3 42 P0.24 In/Out GPIO3 43 SWCLK In SWD Clock 44 SWDIO In/Out SWD IO 17 VCC Power +1.7V to +3.6V2 1, 2, 3, 4, 5, 16, 18, 29, 30, 45, 46, 47 GND Power Electrical Ground Note 1: The RESET̅̅̅̅̅̅̅̅ function can be assigned to another GPIO during programming. P0.21 is the default used by Rigado and Nordic example applications and development kits. Note 2: An internal 4.7µF bulk capacitor is included on the module. However, it is good design practice to add additional bulk capacitance as required for your application, i.e. those with heavy GPIO usage and/or current draw. Note 3: These pins are in close proximity to the nRF52 radio power supply and antenna pins. Radio performance parameters, such as sensitivity, may be affected by high frequency digital I/O with large sink/source current on these pins. Nordic recommends using only low frequency, low-drive functions when possible. Table 3 – Pin Descriptions 6.1 RigDFU Pin Functions Rigado RigDFU is programmed on the BMD-300 Series at the factory. Two GPIO pins are configured as UART pins for transferring new firmware images to the BMD-300. Pins are configured only when bootloader is running, and are fully available to the application firmware. RigDFU can be removed from the BMD-300 by performing a full-chip erase. Pin Name Direction RigDFU Functions 22 P0.06 Out UART TX for bootloader Hi-Z until bootloader activation message received on UART RX. 24 P0.08 In UART RX for bootloader Internal 12kΩ pull-down enabled Table 4 – RigDFU Functions

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 7 of 25 6.2 BMDware Pin Functions Rigado BMDware is programmed on the BMD-300 Series at the factory. BMDware provides UART-to-BLE Bridge, beaconing, and Direct Test Mode (DTM) functionality. The pins in Table 5 below describe the pin functionality in BMDware. DTM Mode, Beacon-Only Mode, and AT Command Mode pin states are checked at BMDware start-up to configure BMDware as required by the user, and are then set to Hi-Z to conserve power. For further details on BMDware operation, please see the BMDware Datasheet that can be found at www.rigado.com. BMDware can be overwritten by RigDFU with custom application firmware, or removed along with RigDFU by a full chip erase. Pin Name Direction BMDware Functions 21 P0.05 Out Bridge UART RTS Disabled in Beacon-Only & DTM modes, N/C if not used. 22 P0.06 Out Bridge UART TX Disabled in Beacon-Only & DTM modes, N/C if not used. 23 P0.07 In Bridge UART CTS Disabled in Beacon-Only & DTM modes, N/C if not used. 24 P0.08 In Bridge UART RX Disabled in Beacon-Only & DTM modes, N/C if not used. 27 P0.11 Out DTM UART TX Only enabled in DTM mode; N/C if not used. 28 P0.12 In DTM UART RX / DTM Mode Only enabled in DTM mode; N/C if not used. On BMDware Start-up: High = Enter DTM mode; Low = Enter Normal Operation Internal 12kΩ pull-down during BMDware start-up, then Hi-Z 31 P0.13 In Beacon Only Mode On BMDware Start-up: High = Bridge UART enabled; Low = Bridge UART disabled Internal 12kΩ pull-up during BMDware start-up, then Hi-Z 32 P0.14 In UART AT Command Mode On BMDware Start-up: High = Full pass-through mode; Low = AT command mode Internal 12kΩ pull-up during BMDware start-up, then Hi-Z Table 5 – BMDware Functions at Start-up

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 8 of 25 7. Electrical Specifications 7.1 Absolute Maximum Ratings Symbol Parameter Min. Max. Unit VCC_MAX Voltage on supply pin -0.3 3.9 V VIO_MAX Voltage on GPIO pins (VCC > 3.6V) -0.3 3.9 V VIO_MAX Voltage on GPIO pins (VCC ≤ 3.6V) -0.3 VCC + 0.3V V TS Storage Temperature Range -40 125 °C Table 6 – Absolute Maximum Ratings 7.2 Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC Operating supply voltage 1.7 3.0 3.6 V TR_VCC Supply rise time (0V to 1.7V) - - 60 ms TA Operating Ambient Temperature Range -40 25 85 °C Table 7 – Operating Conditions 7.3 General Purpose I/O The general purpose I/O is organized as one port enabling access and control of the 32 available GPIO pins through one port. Each GPIO can be accessed individually with the following user configurable features:  Input/output direction  Output drive strength  Internal pull-up and pull-down resistors  Wake-up from high or low level triggers on all pins  Trigger interrupt on all pins  All pins can be used by the PPI task/event system; the maximum number of pins that can be interfaced through the PPI at the same time is limited by the number of GPIOTE channels  All pins can be individually configured to carry serial interface or quadrature demodulator signals Symbol Parameter Min. Typ. Max. Unit VIH Input High Voltage 0.7 x VCC - VCC V VIL Input Low Voltage VSS - 0.3 x VCC V VOH Output High Voltage VCC − 0.4 - VCC V VOL Output Low Voltage VSS - VSS + 0.4 V RPU Pull-up Resistance 11 13 16 kΩ RPD Pull-down Resistance 11 13 16 kΩ Table 8 – GPIO

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 9 of 25 7.4 Debug & Programming The BMD-300 support the two pin Serial Wire Debug (SWD) interface and offers flexible and powerful mechanism for non-intrusive debugging of program code. Breakpoints, single stepping, and instruction trace capture of code execution flow are part of this support. The BMD-300 also supports ETM and ITM trace. Trace data from the ETM and the ITM is sent to an external debugger via a 4-bit wide parallel trace port. In addition to parallel trace, the TPIU supports serial trace via the Serial Wire Output (SWO) trace protocol. 7.5 Clocks The BMD-300 module requires two clocks, a high frequency clock and a low frequency clock. The high frequency clock is provided on-module by a high-accuracy 32-MHz crystal as required by the nRF52832 for radio operation. The low frequency clock can be provided internally by an RC oscillator or synthesized from the fast clock; or externally by a 32.768 kHz crystal. An external crystal provides the lowest power consumption. 32.768 kHz Crystal (LFXO) Symbol Parameter Typ. Max. Unit FNOM_LFXO Crystal frequency 32.768 - kHz FTOL_LFXO_BLE Frequency tolerance, Bluetooth low energy applications - ±250 ppm CL_LFXO Load Capacitance - 12.5 pF C0_LFXO Shunt Capacitance - 2 pF RS_LFXO Equivalent series resistance - 100 kΩ Cpin Input Capacitance on XL1 & XL2 pads 4 - pF Table 9 – 32.768 kHz Crystal 32.768 kHz Oscillator Comparison Symbol Parameter Min. Typ. Max. Unit ILFXO Current for 32.768kHz Crystal Oscillator - 0.25 - µA ILFRC Current for 32.768kHz RC Oscillator - 0.6 1 µA ILFSYNT Current for 32.768kHz Synthesized Oscillator - 100 - µA fTOL_LFXO_BLE Frequency Tolerance, 32.768kHz Crystal Oscillator (BLE Stack) - - ±250 ppm fTOL_LFXO_ANT Frequency Tolerance, 32.768kHz Crystal Oscillator (ANT Stack) - - ±100 ppm f TOL_LFRC Frequency Tolerance, 32.768kHz RC Oscillator - - ±2 % fTOL_LFSYNT Frequency Tolerance, 32.768kHz Synthesized Oscillator - - ±8 ppm Table 10 – 32.768 kHz Oscillator

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 10 of 25 8. Firmware 8.1 Factory Image All modules are shipped with factory programmed firmware. The factory programmed firmware version is indicated on the label, see Figure 3 – MAC Address on Label. 8.1.1 Firmware Version ‘AA’ Factory firmware version ‘AA’ contains the Rigado RigDFU OTA and Serial bootloader, Nordic S132 SoftDevice, and BMDware. Modules can be programmed with customer code via BLE and UART interfaces using Rigado provided tools. Examples apps for iOS and Android are provided that utilize the Rigablue Library for easy OTA updates. Visit the BMD Software Suite page at www.rigado.com for more information. Note: A full chip erase will clear the Rigado assigned MAC address from memory; see section 8.3 “MAC Address Info” on how to retain it. 8.2 SoftDevices Nordic Semiconductor protocol stacks are known as SoftDevices. SoftDevices are pre-compiled, pre-linked binary files. SoftDevices can be programmed in nRF52 series SoCs and are downloadable from the Nordic website. The BMD-300 with the nRF52832 SoC supports the S132 (BLE Central & Peripheral), S212 (ANT) and S312 (ANT and BLE) SoftDevices. 8.2.1 S132 The S132 SoftDevice is a Bluetooth® low energy (BLE) Central and Peripheral protocol stack solution supporting up to three Central and one Peripheral simultaneous connections and concurrent Observer and Broadcaster roles. It integrates a low energy Controller and Host, and provides a full and flexible API for building Bluetooth low energy System on Chip (SoC) solutions. Key Features  Bluetooth 4.2 compliant low energy single-mode protocol stack suitable for Bluetooth Smart products  Concurrent Central, Observer, Peripheral, and Broadcaster roles with up to: o Three connections as a central o One connection as a peripheral o Observer o Broadcaster  Link layer  L2CAP, ATT, and SM protocols  GATT and GAP APIs  GATT Client and Server  Complementary nRF52 SDK including Bluetooth profiles and example applications  Master Boot Record for over-the-air device firmware update  Memory isolation between application and protocol stack for robustness and security  Thread-safe supervisor-call based API  Asynchronous, event-driven behavior  No RTOS dependency o Any RTOS can be used  No link-time dependencies o Standard ARM® CortexTMM4F project configuration for application development  Support for concurrent and non-concurrent multiprotocol operation o Concurrent with the Bluetooth stack using concurrent multiprotocol timeslot API  Alternate protocol stack in application space

BMD-300 Module Datasheet Bluetooth 4.1 LE 03/08/2016 BMD-300-301-DS-V0.9 PRELIMINARY Page 11 of 25 8.2.2 S212 The S212 SoftDevice is an ANT protocol stack solution that provides a full and flexible Application Programming Interface (API) for building ANT System on Chip (SoC) solutions for the nRF52832 chip. The S212 SoftDevice simplifies combining the ANT protocol stack and an application on the same CPU. Key Features Advanced ANT stack  Simple to complex network topologies: o Peer-to-peer, Star, Tree, Star-to-star and more  Up to 15 logical channels, each with configurable: o Channel type, ID and period o RF frequency o Networks  Broadcast, Acknowledged, and Burst Data modes  Device search, pairing and proximity support  Enhanced ANT features: o Advanced Burst Transfer mode (up to 60 kbps) o Up to 15 channels encryption (AES-128) support o Additional networks – up to 8 o Event Filtering and Selective Data Updates o Asynchronous Transmission o Fast Channel Initiation SoftDevice features  Built-in NVM access and radio coexistence management  Master Boot Record for over-the air device firmware update  Memory isolation between application and protocol stack for robustness and security  Thread-safe supervisor-call based API  Asynchronous, event-driven behavior  No RTOS dependency o Any RTOS can be used o No link-time dependencies o Standard ARM® Cortex™ -M4F project configuration for application development  Support for concurrent and non-concurrent multiprotocol operation  Concurrent multiprotocol timeslot API  Alternate protocol stack running in application space 8.2.3 S332 The S332 SoftDevice is a combined ANT™ and Bluetooth® low energy (BLE) protocol stack solution. It supports all four Bluetooth low energy roles (central, peripheral, observer, broadcaster) and ANT. The S332 SoftDevice provides a full and flexible Application Programming Interface (API) for building concurrent ANT and BLE System on Chip (SoC) solutions. It simplifies combining an ANT and BLE protocol stack and an application on the same CPU, therefore eliminating the need for an added device to support concurrent multiprotocol.

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 12 of 25 8.3 MAC Address Info The BMD-300 module comes preprogrammed with a unique MAC address from the factory. The MAC address is also printed on a 2D barcode on the top of the module Figure 3 – MAC Address on Label The 6-byte BLE Radio MAC address is stored in the nRF52832 UICR at NRF_UICR_BASE+0x80 LSB first. Please read the MAC Address Provisioning application note if you are not using the built in bootloader to avoid erasing/overwriting the MAC address during programming. UICR Register: NRF_UICR + 0x80 (0x10001080): MAC_Addr [0] (0xZZ) NRF_UICR + 0x81 (0x10001081): MAC_Addr [1] (0xYY) NRF_UICR + 0x82 (0x10001082): MAC_Addr [2] (0xXX) NRF_UICR + 0x83 (0x10001083): MAC_Addr [3] (0x93) NRF_UICR + 0x84 (0x10001084): MAC_Addr [4] (0x54) NRF_UICR + 0x85 (0x10001085): MAC_Addr [5] (0x94)

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 13 of 25 9. Mechanical Data 9.1 BMD-300 Dimensions Figure 4 – Module Dimensions (All dimensions are in mm) 9.2 BMD-301 Dimensions Figure 5 – Module Dimensions (All dimensions are in mm)

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 14 of 25 9.3 Recommended PCB Land Pad The BMD-300 and BMD-301 have identical PCB layout footprints. Figure 6 – Module Dimensions (All dimensions are in mm) 10. Module Marking 10.1 BMD-300 Module Marking Figure 7 – Module Marking – Rev A – BMD-300

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 15 of 25 10.2 BMD-301 Module Marking Figure 8 – Module Marking – Rev A – BMD-301 11. RF Design Notes 11.1 Recommended RF Layout & Ground Plane For the BMD-300, the integrated antenna requires a suitable ground plane to radiate effectively. The area under and extending out from the antenna portion of the module should be kept clear of copper and other metal. The module should be placed at the edge of the PCB with the antenna edge facing out. Figure 9 – Recommended RF Layout

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 16 of 25 For the BMD-301, refer to the external antenna datasheet for antenna placement and grounding recommendations. 11.2 Mechanical Enclosure For the BMD-300, care should be taken when designing and placing the module into an enclosure. Metal should be kept clear from the antenna area, both above and below. Any metal around the module can negatively impact RF performance. The module is designed and tuned for the antenna and RF components to be in free air. Any potting, epoxy fill, plastic over-molding, or conformal coating can negatively impact RF performance and must be evaluated by the customer. For the BMD-301, refer to the external antenna datasheet for placement in or on a mechanical enclosure. 12. Evaluation Boards Rigado has developed full featured evaluation boards that provide a complete I/O pin out to headers, on-board programming and debug, 32.768 kHz crystal, power & virtual COM port over USB, 4 user LEDs, and 4 user buttons. The evaluation boards also provide the option to be powered from a CR2032 coin cell battery, and have current sense resistors and headers to allow for convenient current measurements. An Arduino Uno R3 style header is provided for easy prototyping of additional functions. The evaluation boards also support programming off-board BMD-300 modules. 13. Custom Development Rigado is a full-service design house offering end-to-end product development from concept to manufacturing. We can provide custom modules and do electrical and mechanical design, end product manufacturing, firmware and mobile development, and web and cloud integration. Please contact Rigado at info@rigado.com or 1-866-6-RIGADO for custom engineering options and fees.

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 17 of 25 14. Bluetooth Qualification (pending) The BMD-300 Series modules are qualified as a Bluetooth End Product with Declaration ID TBD using Nordic’s S132 SoftDevice (Bluetooth Smart 4.2). The BMD-300 Series has also been certified as a Component (tested) for RF-PHY with Declaration ID TDB. This allows customers to use different SoftDevices that have been certified by Nordic without the need to complete additional RF-PHY testing, provided that the design is not changed. 15. Regulatory Statements Note: Regulatory Statements are for reference only pending the completion of testing and approvals. 15.1 FCC Statement: This device has been tested and found to comply with part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and the receiver  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Operation is subjected to the following two conditions: (1) This device may no cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modification to this product will void the user’s authority to operate this equipment. Note: Modification to this product will void the users’ authority to operate this equipment. 15.2 FCC Important Notes: (1) FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in this document. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the user authority to operate the equipment.

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 18 of 25 (2) Co-location Warning: This device and its antenna(s) must not be co-located or operating in conjunction with any other transmitter antenna. (3) OEM integration instructions： This device is intended only for OEM integrators under the following conditions: The antenna and transmitter must not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as the two (2) conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements with this module installed (for example, digital device emission, PC peripheral requirements, etc.) In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstance, the OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization. Caution! The OEM is still responsible for verifying compliance with FCC Part 15, subpart B limits for unintentional radiators through an accredited test facility. (4) End product labeling： The final end product must be labeled in a visible area with the following:  BMD-300: “Contains FCC ID: 2AA9B04”  BMD-301: “Contains FCC ID: 2AA9B04” Any similar wording that expresses the same meaning may be used. The FCC Statement below should also be included on the label. When not possible, the FCC Statement should be included in the User Manual of the host device. “This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.” (5) Information regarding the end user manual： The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual (Section 15.2(4)).

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 19 of 25 15.3 IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Avertissement d'exposition RF: L'équipement est conforme aux limites d'exposition aux RF établies pour un incontrôlés environnement. L'antenne (s) utilisée pour ce transmetteur ne doit pas être co-localisés ou onctionner en conjonction avec toute autre antenne ou transmetteur . 15.4 IC Important Notes: 1. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 2. To comply with IC RF exposure compliance requirements, the antenna used for this transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter, except in accordance with IC multi‐transmitter product procedures. 3. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented two‐ways authentication between module and the host system. 4. The host device shall be properly labelled to identify the module within the host device. The final end product must be labeled in a visible area with the following:  BMD-300: “Contains IC: 12208A-04“  BMD-301: “Contains IC: 12208A-04 “ Any similar wording that expresses the same meaning may be used. The IC Statement below should also be included on the label. When not possible, the IC Statement should be included in the User Manual of the host device. “This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le onctionnement.”

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 20 of 25 15.5 CE Regulatory: This device will be tested and compliant against the following standards. OEM integrators should consult with qualified test house to verify all regulatory requirements have been met for their complete device. From Directive 2006/95/EC:  EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 From R&TTE Directive 1999/5/EC:  ETSI EN 300 328 V 1.8.1 From Directive 2004/108/EC:  ETSI EN 301 489-1 V1.9.2  EN 61000-3-2: 2014, EN 61000-3-3:2013  ETSI EN 301 489-17 V2.2.1 Declarations of Conformity and supporting test reports are available at www.rigado.com. 15.6 Japan (MIC) The BMD-300 Series modules have received type certification and is labeled with its own technical conformity mark and certification number as required to conform to the technical standards regulated by the Ministry of Internal Affairs and Communications (MIC) of Japan pursuant to the Radio Act of Japan. Integration of this module into a final end product does not require additional radio certification provided installation instructions are followed and no modifications of the module are allowed. Additional testing may be required: • If the host product is subject to electrical appliance safety (for example, powered from an AC mains), the host product may require Product Safety Electrical Appliance and Material (PSE) testing. The integrator should contact their conformance laboratory to determine if this testing is required. • There is a voluntary Electromagnetic Compatibility (EMC) test for the host product administered by VCCI: http://www.vcci.jp/vcci_e/index.html The label on the final end product which contains a BMD-300 Series module must follow the MIC marking requirements. Labeling requirements for Japan available at the Ministry of Internal Affairs and Communications (MIC) website: http://www.tele.soumu.go.jp/e/index.htm. The BMD-300 module is labeled with its assigned technical conformity mark and certification number. The final end product in which this module is being used must have an external label referring to the type certified module inside:

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 22 of 25 17. Packaging and Labeling 17.1 Carrier Tape Dimensions Figure 11 – Carrier Tape Dimensions 17.2 Reel Packaging Modules come on 330mm reels loaded with 1000 modules. Each reel is placed in an antistatic bag with a desiccant pack and humidity card and placed in a 340x350x65mm box. On the outside of the bag an antistatic warning and reel label are adhered. Figure 12 – Reel Cartons

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 23 of 25 17.3 Packaging Label Figure 13 – Packaging Label

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 24 of 25 18. Cautions 1) The guidelines of this document should be followed in order to assure proper performance of the module. 2) This product is for use in office, business, and residential applications, but not medical devices. 3) This module may short-circuit. If a short circuit can result in serious damage or injury then failsafe precautions should be used. This could be accomplished by redundant systems and protection circuits. 4) Supply voltage to the module should not be higher than the specified inputs or reversed. Additionally, it should not contain noise, spikes, or AC ripple voltage. 5) Avoid use with other high frequency circuits. 6) Use methods to eliminate static electricity when working with the module as it can damage the components. 7) Contact with wires, the enclosure, or any other objects should be avoided. 8) Refer to the recommended pattern when designing for this module. 9) If hand soldering is used, be sure to use the precautions outlined in this document. 10) This module should be kept away from heat, both during storage and after installation. 11) Do not drop or physically shock the module. 12) Do not damage the interface surfaces of the module. 13) The module should not be mechanically stressed at any time (storage, handling, installation). 14) Do not store or expose this module to:  Humid or salty air conditions  High concentrations of corrosive gasses.  Long durations of direct sunlight.  Temperatures lower than -40°C or higher than 125°C. 19. Life Support Policy This product is not designed to be used in a life support device or system, or in applications where there is potential for a failure or malfunction to, directly or indirectly, cause significant injury. By using this product in an application that poses these risks, such as described above, the customer is agreeing to indemnify Rigado for any damages that result. 20. Document History Revision Date Changes / Notes 0.8 11/06/2015 Initial preliminary release 0.8.1 11/10/2015 Updated Table 5, Figure 5, Section 7.5 Corrected antenna references 0.8.2 11/11/2015 Updated Figure 1 0.8.3 11/20/2015 Updated current ratings from nRF52832 OPC v0.6.3 Corrected Table 3 0.9 03/17/2016 Added BMD-301, GPIO notes, MSL, updated certifications, updated electrical specifications 0.9.4 03/23/2016 Added BMD-301 antennas

BMD-300 Series Module Datasheet Bluetooth 4.2 LE 03/23/2016 BMD-300-DS-V0.9.4 Page 25 of 25 21. Related Documents Rigado Documents:  BMD-300-Series-EVAL-UG: Evaluation Kit User Guide  RIGDFU-DS-1: RigDFU Secure Bootloader Datasheet  BMDWARE-DS-1: BMDware Datasheet Nordic Documents: Visit infocenter.nordicsemi.com for a comprehensive library of Nordic technical documentation.  nRF52832-PS: nRF52832 Product Specification  S132-SDS – nRF52832 S132 Soft Device Specification  S212-SDS – nRF52832 S132 Soft Device Specification  S332-SDS – nRF52832 S132 Soft Device Specification

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA