u blox LISAU200 3.75G HSPA Wireless Module User Manual

u-blox AG 3.75G HSPA Wireless Module LISA U series

a href="https://usermanual.wiki/u-blox" itemprop="url"> u blox >

MANUAL

TTU-2830 Hardware & Installation Guide TTU-2830™ Hardware and Installation Guide 1 Introduction Welcome to the TTU-2830™Hardware and Installation Guide. This manual is intended to give you information on the basic setup and installation of the CalAmpTTU-2830™product(s) including hardware descriptions, environmental specifications, wireless network overviews and device installation. 1.1 About This Manual The TTU-2830™is one of the most flexible economy mobile tracking hardware products available. In order to accurately describe the functionality of these units we have broken this manual into the following sections: • Hardware Overview – Describes the physical characteristics and interfaces of the TTU-2830™. • Installation and Verification – Provides guidance for the installation of the TTU-2830™in a vehicle and instructions on how to verify the installation is performing adequately.
1.2 About the Reader In order to limit the size and scope of this manual, the following assumptions have been made about the reader. • You are familiar with GPS concepts and terminology • You have some experience with installing equipment in vehicles 1.3 About the CalAmp Location Messaging Unit-TTU-2830™ The CalAmp Location and Messaging Unit-TTU-2830™(TTU-2830™) is a mobile device that resides in private, commercial or government vehicles. The TTU-2830™is a single box enclosure incorporating a processor, a GPS receiver, a wireless data modem, and a vehicle-rated power supply. The TTU-2830™also supports inputs and outputs to monitor and react to the vehicular environment and/or driver actions. 2 System Overview 2.1 Overview The entire purpose behind a fleet management system is to be able to remotely contact a vehicle, determine its location or status, and do something meaningful with that information. This could include displaying the vehicle location on a map, performing an address look-up, providing real-time driving directions, updating the vehicles ETA, monitoring vehicle and driver status or dispatching the vehicle to its next pick up. These functions, of course, are completely dependent on the capabilities of the vehicle management application. The role of the CalAmpTTU-2830™is to deliver the location information when and where it is needed. A typical fleet management system based on a CalAmp device includes the following components: • A wireless data network • An TTU-2830™ • Backend mapping and reporting software from Actsoft which typically includes mapping and fleet reporting functions 2.2 Component Descriptions
Download:
Mirror Download [FCC.gov]
Document ID2967498
Application IDqmODKRIZwX8Wy6aCLAwgxA==
Document DescriptionMANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.62kB (232692 bits)
Date Submitted2016-04-22 00:00:00
Date Available2016-04-25 00:00:00
Creation Date2016-04-21 11:46:24
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2016-04-21 11:46:24
Document TitleMicrosoft Word - TTU2830_Installation_Guide
Document CreatorPScript5.dll Version 5.2.2
Document Author: Zhang-Cn
FCC ID Filing: XPYLISAU200

Navigation menu