3D Systems MERCURY Mercury RFID User Manual
3D Systems Corporation Mercury RFID
Contents
- 1. user manual
- 2. User Manual
user manual
![](/img.php?id=3835014&img=bg1.png)
SLS SINGLE USE MQC
SYSTEM
User Guide
Original Instructions
![](/img.php?id=3835014&img=bg2.png)
3D Systems, Inc. p/n 77-D005 Rev_A
3D Systems, Inc. p/n xx-xxxx Rev_A
Contents
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 1
ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 1
What’s Inside? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 1
2 INTRODUCTION TO THE MQC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 2 ProX® Material Quality Control (MQC) System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 2
ProX® MQC Single use System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4
ProX® MQC Single Use System User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .4
ProX® MQC Single Use System Stack Light Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .4
Fresh Material Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .5
3 SAFETY GUIDELINES & INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 6 General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Training and Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 6
Machine Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 6
Material Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 6
Alarms and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 6
Safety Symbols and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 7
First Aid Section – What to do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7
Burns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .7
Electrocution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .7
Material Inhalation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .7
SLS Equipment Safety Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 8
Safety Interlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .8
Limited Access and Barrier Shielding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .8
![](/img.php?id=3835014&img=bg3.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Other Active Safety Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .8
Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 9 Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Material Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .10
Material Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 10
Material Ignition Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .10
Finding Material Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .10
Material Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .11
Material Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .11
Safe Material Handling Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .11
Nitrogen/Oxygen Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 12
Oxygen Deprivation Effects and Symptoms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .12
4 PROX® MQC SINGLE USE SYSTEM OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 13
How the prox® MQC single use System Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 13 Receiving and Storing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .13
Blending and Sending Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .13
Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 13
Turning on the ProX® MQC Single Use System: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .13
Shutting Down the ProX® MQC Single Use System Completely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .14
Cleaning the ProX® MQC Single Use System Before Breakout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .14
i
Verifying Material Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .14
Removing the Print Cake from the Print Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 14 Where to Cool Down the Print Cake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .14
Unloading the Print Cake After a Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .15
![](/img.php?id=3835014&img=bg4.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Breaking Out Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 17 Part Finishing After Breakout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Operational Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .18
System Setup/Service Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .18
Prox MQC single use System User Interface Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Display Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .19
ProX MQC Single Use System Main Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .19 In opposite screen: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
First line display may change based on MQC current status: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
ProX MQC Single Use System Main Control Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .20
Operational Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .21
To Load Fresh Powder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .21
To change Replenish percentage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .22
Diagnostics Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .24
Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .24
Material Tracking Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .24
Fresh-Bin Diag Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .25
Blend-Bin Diag Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .25
Sifter Diag Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .26
Generic I/O Diag Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .26
5 PROX® MQC SINGLE USE SYSTEM MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 27
MQC – USER MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 27
6 LEGAL NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 28 7 BASIC REGULATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3D Systems, Inc. p/n 77-D005 Rev_A
ii
![](/img.php?id=3835014&img=bg6.png)
3D Systems, Inc. p/n 77-D005 Rev_A
INTRODUCTION
Thank you for purchasing the 3D Systems ProX™ MQS (Material Quality Control) 3D Production Printer, auxiliary SLS
equipment, and 3D Systems materials! Before you start printing parts with your process facility, please read this guide carefully
to enjoy optimum process performance and longer equipment service life .
ABOUT THIS GUIDE
This guide describes how to operate and maintain your ProX® Material Quality Control (MQC) System used for the SLS process .
For part printing instructions, refer to the Material Guide for your specific material.
WHAT’S INSIDE?
MQC System Operations
This section details the operation of the MQC System including part breakout .
Safety Guidelines and Instructions
The Safety section tells you what you need to know to avoid injury or equipment damage . Read this section before you switch
on power to any SLS equipment or handle any material .
ProX® MQC Single Use System Operations
This section details the operation of the ProX® MQC System including part breakout .
![](/img.php?id=3835014&img=bg7.png)
3D Systems, Inc. p/n 77-D005 Rev_A
2 INTRODUCTION TO THE MQC
PROX® MATERIAL QUALITY CONTROL (MQC) SYSTEM
The ProX® MQC Single Use System is designed to be used as the material handling unit for the ProX® SLS 6100 SLS line of
printers . It is responsible for delivering material to the printer, storing and mixing fresh and used material, and breaking out
the SLS parts from the print cake which is produced by the printer .
SLS Single MQC System – Front View
Power Switch: This switch enables and disables power to the ProX® MQC Single User System .
Blended Material Bin: Material which is a combination of used material and fresh material is stored for production use
in this hopper . The system handles this automatically .
Fresh Material Input: Fresh material is loaded at this location . The user must scan the RFID tag on the container across
the RFID reader . .
RFID Reader: The RFID reader is used to scan the RFID tag of the material container . This ensures that the system keeps
track of material quantity and fresh-to-new powder ratios . The tag must be scanned to unlock the Fresh Material input
doors and add the material to the system .
I
A
K
G
H
B
C
D
E
F
J
A
B
C
D
![](/img.php?id=3835014&img=bg8.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Breakout Area: The print cake is brought here using the Print Transfer Cart Assembly .
Reject Chute: Spent material (as determined by the user) is loaded into the reject chute .
Thermocouples: Two temperature gauges for the print cake are used to determine whether or not the print cake has
cooled sufficiently before breaking out the parts.
Nitrogen Blanket: This lid is placed on top of a filled print cake cylinder to control the cooldown of the print cake using
nitrogen .
Stowaway Area: Underneath the breakout area, there is a space which can be used to store part extraction cylinders
when they are not in use .
Sifter: The user removes the parts from the print cake in the breakout area and places the material for reuse into the
sifter .
SLS Single MQC System Operator Controls: User interface for operation of the SLS Single MQC System .
I
E
A
B
C
D
F
G
H
E
F
G
H
I
J
K
![](/img.php?id=3835014&img=bg9.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Ethernet Adaptor (3x): Network connections to service 1 printer and a laptop (for service personnel only) .
USB Adapter
4-Pin Connector for Oxygen Sensor
Nitrogen Inlet: Input for nitrogen supply .
Quick-Disconnect Air Fitting: Input for compressed air coming into the MQC System
Pressure Regulator (Nitrogen)
Pressure Regulator (Air)
Pressure Regulator (Air)
Transport Filter: The material filter for the ProX® MQC Single Use System .
PROX® MQC SINGLE USE SYSTEM COMPONENTS
ProX® MQC Single Use System User Interface
The User Interface, located on the front panel of the ProX® MQC Single Use System, consists of a dial-operated menu screen
that allows the user to access the functionality of the system . An E-Stop control is located to the right of the screen and the
system power switch is located to the left .
B
C
D
A
A
B
C
D
E
F
G
H
I
![](/img.php?id=3835014&img=bga.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Power Switch: This switch enables and disables power to the ProX® MQC Single Use System.
LED Display: The display is operated using the Control Dial (see below) . It gives the user access to all functionality of
the machine .
Emergency Stop Button: Depress the E-Stop button to cut off all power to the machine . This function is usually
reserved for situations where the machine cannot be stopped normally .
Control Dial: The user selects functions on the LED Display using this dial control .
ProX® MQC Single Use System Stack Light Conditions
Fresh Material Input
The material input hatch takes fresh material from the user and feeds it to the ProX® MQC Single Use System . To unlock the
hatch, the user must first swipe the tag of the material container across the tag reader.
Light Color
Solid
Flashing
Off
Red
E-Stop condition
System fault active
Normal
Yellow
System is in service mode
System warning active and/ or
message present on user
interface
E-Stop condition or
normal
Green
System is active . Printer
transports are enabled
System is active . Printer transports
are disabled
E-Stop condition or
normal
A
B
C
D
![](/img.php?id=3835014&img=bgb.png)
3D Systems, Inc. p/n 77-D005 Rev_A
3 SAFETY GUIDELINES & INSTRUCTIONS
GENERAL GUIDELINES
Before using your SLS equipment, your company should have a safety program in place . The safety program should:
• Point out hazardous equipment, materials, and procedures.
• Explain what to do in case of an emergency.
• Provide information about the hazards of the equipment and materials in the form of Safety Data Sheets (SDS).
The Safety Data Sheets are provided with all materials supplied by 3D Systems.
All SLS equipment is designed with safety in mind . However, improper use, malfunctions, and excessive exposure could cause
injury .
TRAINING AND INSTRUCTIONS
Follow these general safety guidelines when operating any SLS equipment:
• Do not operate any SLS equipment before receiving proper training.
• Read and follow all operating instructions.
• Follow all safety rules in this section and heed all hazard warnings in this guide.
• Do not try to perform any equipment maintenance procedures you were not trained to do.
• Operators are trained to operate the system and perform all the necessary tasks to print a part.
![](/img.php?id=3835014&img=bgc.png)
3D Systems, Inc. p/n 77-D005 Rev_A
• Certified service personnel are those who have completed the 3D Systems service training package and are
certified to
perform service tasks. Certification may occur at various levels, and servicers should only perform tasks
they are authorized and certified to complete.
MACHINE HANDLING
• Do not try to access, service, or adjust any components inside any SLS equipment enclosure.
• Do not try to open any panel or door while a machine is running.
• Do not access any area of the machine near the print chamber during printing.
• Use special caution when handling a heated print cake and when dealing with the heated, inert environment
inside the SLS system’s print chamber. Take note of all thermal hazard warning labels on the machines.
• Secure electrical cables and coolant hoses to prevent tripping.
MATERIAL HANDLING
• Do not use any material without first reviewing its Safety Data Sheet (SDS).
• To prevent injury and equipment damage, be sure to follow all handling guidelines detailed in the appropriate
Material Guide.
ALARMS AND WARNINGS
• If you see an error, alarm, or warning message on any SLS equipment display, note the state of that machine’s
stack light. Clear the alarm, error, or warning message before resuming operation.
• Displayed error, alarm, or warning messages can result from unsafe practices, such as opening an enclosure
door or panel when equipment is powered up and running.
SAFETY SYMBOLS AND DEFINITIONS
The following safety labels are posted at various points on the machine to indicate potentially hazardous conditions:
HOT SURFACES HAZARD: There are surfaces and materials in the vicinity that may be hot and
could cause severe burns.
ELECTRIC SHOCK HAZARD: High voltage electricity is accessible in the vicinity of this sign or
behind the access panel. High voltage can cause severe burns or death. Access panels are for
service only and should be opened only by certified service personnel or trained maintenance
personnel.
CAUTION: Indicates something may happen that could cause loss of data, damage to equipment,
or personal injury.
FIRST AID SECTION – WHAT TO DO
In the case of an accident while using any SLS equipment, seek medical attention immediately. Use
the following guidelines for specific safety instances.
![](/img.php?id=3835014&img=bgd.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Burns
This equipment contains high temperatures and burning laser radiation which could cause 2nd degree burns . Do not attempt to
remove any protective panels . There are no user serviceable parts inside .
If a burn occurs, seek first aid and immediate medical attention. Pushing the E-stop button will de-energize the equipment and
diffuse the hazardous situation .
Electrocution
The SLS system contains equipment energized at 208 volts, 3-phase delta . Do not attempt to remove protective panels . There
are no user serviceable parts inside .
If electrocution occurs, seek first aid and medical attention immediately. Pushing the E-stop button will de-energize the
equipment and diffuse the hazardous situation .
Material Inhalation
The part cleaning process may create a choking or air restriction hazard. If someone has difficulty breathing or a “loss of
breath” sensation, transport the person to a well-ventilated room or outside of the facility . If the condition persists, seek
immediate medical attention .
SLS EQUIPMENT SAFETY FEATURES
A major design goal for all SLS equipment is to provide a safe operating environment . The frame and enclosure designs
passively limit hazardous access while the electronics and software actively and automatically sense and react to unsafe
conditions when they arise . For example, if the SLS system detects unsafe operating conditions, it will immediately stop
operating and, in some cases, shut down completely .
CAUTION: If any SLS equipment safety features fail, your actions may be all that will prevent
potentially hazardous operating conditions.
Safety Interlocks
Safety interlock devices on the SLS equipment help prevent accidental laser exposure, electrical shocks, crush injuries, burns,
and fires. SLS equipment will not operate unless all safety interlocks are satisfied.
CAUTION: Never try to disable or override any safety interlock device on any SLS equipment.
Operating equipment without all safety interlocks enabled can cause equipment damage, injury, or
death. If you suspect a safety interlock device is not working properly, do not operate your SLS
equipment. Rather, disconnect power from the equipment and contact 3D Systems Customer Support for
assistance.
a. Internal panels are for service access only. Several interlocked panels are for customer maintenance: overflow cleanout,
blackbody cleaning port, and the filter box located on back of machine.
Limited Access and Barrier Shielding
SLS equipment frame and enclosure designs limit access to the following:
• Service areas, such as cabinets and enclosures for electrical power and automation controls. This prevents
accidental exposure to electrical shock hazards.
• Material areas, such as material feed hoppers, storage bins, and transport tubes. This prevents:
• burn hazards by minimizing exposure to heated material
• slip hazards by keeping material from dropping on the floor
• fire hazards by minimizing airborne dust cloud formation and potential ignition. See SDS for complete
material hazard details.
![](/img.php?id=3835014&img=bge.png)
3D Systems, Inc. p/n 77-D005 Rev_A
Other Active Safety Features
• The ProX® MQC Single Use System, coupled with the Dust Collector, removes airborne material during part
breakout in accordance with standard industrial ventilation practices.
• An optional room oxygen monitor automatically initiates SLS system shutdown when it detects too little oxygen in
the room.
• Software in the SLS system automatically initiates immediate equipment shutdown if certain unsafe conditions
are detected during operation.
ELECTRICAL SAFETY
To prevent electrical shock, SLS equipment will not operate unless all external panels are installed and all electrical safety
interlock circuits are closed .
ELECTRICAL HAZARD: Hazardous voltage exists inside the enclosures of all SLS equipment. Injury
or death from electrical shock can result if you remove external panels or try to defeat safety
interlocks. Panels should only be removed, and interlocks should only be defeated, by trained and
certified 3D Systems Customer Support personnel.
ELECTRICAL HAZARD: Verify your facility’s electrical service ratings before connecting