Amped Wireless B1900EX AC1900 Wi-Fi Range Extender User Manual Amped Wireless
Amped Wireless AC1900 Wi-Fi Range Extender Amped Wireless
Users Manual
GOT QUESTIONS? Phone: 888-573-8820 or 909-217-3168 Email: techsupport@ampedwireless.com Web: www.ampedwireless.com/support SETUP GUIDE READ FIRST B1900EX AC1900 WI-FI RANGE EXTENDER ® Watch the Installation Video here: http://support.ampedwireless.com/b1900ex Find a Setup Location About Half-Way Between your Wi-Fi Router & your Wi-Fi Dead Zone RECOMMENDED SIGNAL STRENGTH >70% B1900EX Internet Wi-Fi Router Dead Zone Home/Office Network THE RANGE EXTENDER MUST RECEIVE A STRONG SIGNAL FROM YOUR WI-FI ROUTER. We recommend the signal from your router is >70%. We'll find out the exact strength in Step 6. If you are connecting to a dual band router, both 2.4GHz and 5GHz connections should be greater than 70%. Connect your Mobile Device or PC to the Range Extender - or - Amped_B1900EX... Attach the Power Adapter to the Range Extender’s port and an available power outlet. Connect to the Range Extender's Wi-Fi network: Amped_B1900EX_2.4 or Amped_B1900EX_5.0 PWR (See back for operating system specific instructions.) Attention Windows Users: - or - A prompt may appear asking: "Do you want to set up your network?" If so, select "Connect to the network without setting it up" or "No, just connect". Open your Web Browser Enter the setup web address into your browser: Amped Wireless http://setup.ampedwireless.com http://setup.ampedwireless.com If the URL fails to open, then try: http://192.168.1.240 Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox. ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS. THE MENU IS SERVED FROM THE RANGE EXTENDER. IF YOU HAVE PROBLEMS ACCESSING THE WEB MENU... a Disconnect your PC from all Wi-Fi networks. a) b Attach an Ethernet cable between the PC and the Range Extender. b) c Open your web browser and go to http://setup.ampedwireless.com again. c) Welcome to the Setup Wizard The Setup Wizard will guide you through the setup process. Click Scan to find available networks to extend. Welcome to the B1900EX Setup Tap Scan to find available networks to extend. Welcome to the B1900EX Setup Tap Scan to find available networks to extend. Tap Skip to to go the Dashboard. Scan Click here to Skip the Wizard and go to the Dashboard to configure the extender manually Setup screens for mobile devices will vary from desktop and tablet versions. Scan Skip Scan for a Home Network to Extend Highlight and select the wireless network that you wish to repeat. If you have a dual band network, select only the 5GHz network. >70% Recommended Signal Select the wireless network with a signal strength greater than 70% for the most reliable connection. Poor signal connections may cause slow speeds or dropped connections. Click Next to continue. If you do not see your desired wireless networks, or the signal strength is less than 70%, move the Range Extender closer to the router and scan again as it may be out of range. Home Network Security Settings (if necessary) If your wireless home networks has security enabled, you will need to enter the security key here. If you selected both a 2.4GHz and a 5GHz network to repeat, you will need to enter both security keys here. If your wireless home network does not have security enabled, leave the security field blank. Click Next to continue. Configure Settings for your Extended Networks The IDs of your Extended Networks are: Amped_B1900EX_2.4 & Amped_B1900EX_5.0 If you choose to "Clone" the settings from your Home Network, the wizard will copy the SSID and security key of your Home Network. The SSID of the Extended Network will have a "_RE" at the end of its name. For example: Home_Network_RE You can also manually enter a new network ID and security key. The new security key must be at least 8 characters long. Amped_HeliosEX_5.0 Amped_HeliosEX_2.4 Click Next to apply the settings. DO NOT LEAVE OR REFRESH THIS PAGE Allow the countdown to complete and the wizard will automatically redirect you to the next step. Connect to the New Extended Network During the countdown process, the Range Extender will reboot and disconnect the Wi-Fi connection. At this point, you will need to reconnect your PC or tablet to the new Extended Network. You may connect to either the 2.4GHz or 5GHz Extended Network. Follow the instructions on the screen to connect. Once you have connected, click OK to complete the setup process. If there are problems with your configuration, the setup wizard will inform you to rescan for a network to extend. If there are no problems, you will see the Setup Summary page below. Setup Summary Congratulations, the Range Extender is now successfully configured. Your settings are now saved. You may also attach any wired network devices to the wired ports on the back of the Range Extender. The wizard will notify you if there is a newer firmware for the Extender. We recommend that you upgrade your Extender at this time if an update is available. If you experience any problems during this process, please contact Amped Wireless Elite Support: 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com/support If you haven’t already positioned your Range Extender in an optimal location, you may do so now. All Range Extender settings are saved and can be safely powered off for relocation. Finding an Optimal Placement Location (Signal Strength LED) OPTIMAL INSTALLATION Signal Strength LED helps you find the perfect location Green: Excellent Signal 70-100% Yellow: Moderate Signal 60-69% Red: Poor Signal 59% and below The Range Extender is equipped with a Signal Strength LED on front of the device to help you find the most optimal location. It may take 1-3 minutes for the LED to register after powering on the Extender. After setup, the LED can be your guide for positioning the Extender to a better location (if needed). We recommend a signal strength of at least 70%, or when the LED is green. Note: The LED will not turn on if the Extender setup has not been completed first. v061417 This is the second page of the Setup Guide. Start on the opposite side first. How to Connect Wirelessly to the Range Extender Connecting to the 5GHz network requires that you have a 5GHz capable network adapter. Windows 10 Windows 8 Access the taskbar on the bottom right of your screen, tap on the Wi-Fi icon, enable Wi-Fi, and select Amped_B1900EX_2.4 or Amped_B1900EX_5.0. Swipe in from the right edge to access the charms bar, tap on Settings, select the Wi-Fi icon, and select Amped_B1900EX_2.4 or Amped_B1900EX_5.0. Amped_B1900EX Network01 Network02 Amped_B1900... Mac OS X iPhone Click on the Wireless icon to see available wireless networks. Select Amped_B1900EX_2.4 or Amped_B1900EX_5.0 network. Tap on your Settings icon, select Wi-Fi, and choose the network, Amped_B1900EX_2.4 or Amped_B1900EX_5.0. Amped_B1900EX_5.0 Amped_B1900EX... iPad Tablet A. B. C. D. E. Tap the "Home" button to get to the home page. Tap the "Settings" app icon. Tap on Wi-Fi to enter the iPad’s Wi-Fi settings. Toggle the Wi-Fi "On/Off" selector switch to "On". Under "Choose a Network," select: Amped_B1900EX_2.4 or Amped_B1900EX_5.0 Amped_B1900EX_5.0 Android Tablet A. B. C. D. E. Tap the "Apps" menu on the tablet screen. Locate and tap the "Settings" app icon. Under "Wireless & networks," tap "Wi-Fi settings". Tap the Wi-Fi box to turn on Wi-Fi and scan. Under "Wi-Fi networks," select: Amped_B1900EX_2.4 or Amped_B1900EX_5.0 Amped_B1900EX_5.0 Wi-Fi Protected Setup (One-Touch Setup or Push Button Configuration) If your wireless adapter has WPS one-touch setup, you can use it when connecting to the Range Extender. Hold down the WPS button on the Range Extender (back panel) for 3 seconds. The Power/WPS LED will begin to blink. As it blinks, push the WPS button on your wireless adapter or enable WPS with the provided software for your wireless adapter. Using the Features on the Range Extender The Range Extender is equipped with many powerful features like advanced security features, all of which can be accessed through the web menu: 12:26 Wireless Access Scheduling Control when your Wi-Fi is on/off. Location: More Settings > 2.4 or 5GHz Wi-Fi Settings > Access Schedule User Access Control Restrict network access to specific users. Location: More Settings > 2.4 or 5GHz Wi-Fi Settings > User Access Wireless Coverage Control Adjust the distance of your wireless network Location: More Settings > 2.4 or 5GHz Wi-Fi Settings > Wireless Coverage Auto Reboot Automatically reboot the Range Extender at set intervals for maintenance. Web Menu (left side) Location: More Settings > Management > Reboot If you are unfamiliar or want more information on the security features of the Range Extender, please visit the website: http://support.ampedwireless.com/b1900ex Setting the Range Extender’s System Clock In order for your Access Schedules and logs to perform using the correct time stamps and schedules you will need to set your System Clock. To do so, go under Management and access the System Clock tab to sync the System Clock with your computer’s time or to sync with the Internet. Additional Features Reset the Range Extender to Default Settings There are two options to reset the Range Extender back to factory default settings: Access the Reset button through the web menu on the left side under More Settings > Management > Save/Reload Settings. Select the Reset Settings to Default. Access the physical Reset button on the back panel of the Range Extender: Hold down the Reset button for five to ten (5-10) seconds. You may need to use a pen tip or pin to access the button. Pressing the Reset button for less than five (5) seconds will simply reboot the Range Extender while saving your existing settings. Wired Ports Wired Port LEDs • Indicates when a device is connected to a wired port (modem or local network) on the back of the Range Extender. The LED will light up when wired data traffic is transmitted or received. The green LEDs display when there is an active gigabit connection. Reset Button LED Lights On/Off c LED Lights On/Off • LED Lights On/Off: Push button to turn the LED indicators on the front of the Range Extender on or off. Setting a Login & Password for the Web Menu This login/password is NOT the wireless network key used to connect to your wireless network. For added security you may want to set a login and password to access the web menu. To do this, go to More Settings > Management > Password on the left side of the web menu. If you forget your login and password, you will need to reset the Range Extender back to default settings to access the web menu. To reset the Range Extender to default settings, hold the reset button on the top of the Range Extender for 5-10 seconds. Tips: Power Outages, Rebooting Routers & Channel Changes Wireless routers operate on specific wireless channels to avoid interference with neighboring networks. Some wireless routers are set to automatically scan for the best wireless channel. A power outage, or a simple reboot, may cause your home wireless router to change its wireless channel and cause the Range Extender to disconnect from your home network. After a minute or two the Range Extender will automatically reconnect to your Home Network with the new settings. However, if for whatever reason it does not, simply log onto the Range Extender’s web menu by opening your web browser and going to http://setup.ampedwireless.com. If the page does not load, try resetting the Range Extender by holding down the Reset button on the back panel for five to ten seconds. After the Range Extender has rebooted, open your web browser and run through the Setup Wizard again. Autoloading Web Menu When the Range Extender loses its connection with your Home Network, the web menu will automatically load on your web browser. All web address entries will be redirected to the Dashboard of the Range Extender. This redirect feature is meant to notify and help you to easily reconfigure your Range Extender in the event of a disconnection. You may disable this feature through the web menu (left side): More Settings > Network Settings > IP Settings. The feature is titled: Auto-DNS. Troubleshooting Tips PROBLEM: SOLUTIONS: PROBLEM: SOLUTIONS: PROBLEM: SOLUTIONS: I entered setup.ampedwireless.com and it failed to open the web menu. a. b. c. d. e. Make sure your computer is connected to the Range Extender’s Wi-Fi network: Amped_B1900EX_2.4 or Amped_B1900EX_5.0 Try to use a different web browser. We recommend the Google Chrome web browser. Try to open your web browser to the default IP address by putting this number into your web browser instead: 192.168.1.240 Power off (unplug) the Range Extender and power it back on. Try again. Reset your Range Extender to default settings by holding the Reset button (located on the back panel) for ten (10) seconds and try again. f. If steps (a) through (e) fail, disconnect your PC from all Wi-Fi networks. Attach an Ethernet cable between the Range Extender and your PC. Try to access http://setup.ampedwireless.com again. My Range Extender was working fine previously, but now I can no longer access the Internet through the Range Extender. a. The connection to your Home Network may have been dropped or the router settings may have changed. Changes to the router could be a result of several events, such as a power outage. When this occurs, connect to the Range Extender and access the setup menu using the web address: http://setup.ampedwireless.com. Run the Wizard to reconnect the Range Extender to your network. b. Using the setup menu (setup.ampedwireless.com) check to see that the signal strength between the Range Extender and your Home Network is above 70%. The Range Extender may be too far from your router and not maintaining a signal strength of above 70%. Check the signal strength between the router and the Range Extender through the web menu (left side): More Settings > Management > Device Status. The Signal Strength readout will be under the Home Wireless Network Settings section. This Signal Strength must be above 70%. If it is below, move the Range Extender closer to your router, or reposition the Range Extender. I cannot find my Home Network when scanning for wireless networks in the web menu Scan page. a. The Range Extender may be out of range. Move the Range Extender closer towards the wireless router and try the Setup Wizard again from the web menu. b. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden. Hidden SSIDs will require that you manually enter the SSID into the Wireless Settings > Home Network menu. If you continue to have issues setting up the Range Extender, give us a call — we’re here to help: 888-573-8820 or 909-217-3168 Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support Amped Wireless A Division of Newo Corporation Copyright © 2017 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation. v061417 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device is restricted to indoor use. High Power Radars: High power radars are allocated as primary users (meaning they have priority) in the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These radars could cause interference and/or damage to Wireless LAN devices used in Canada. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250 - 5350 MHz et 5650 - 5850 MHz. Ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps CAN ICES-3 (B)/NMB-3(B)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2017:06:14 16:42:59-07:00 Modify Date : 2017:09:15 16:27:18+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Title : Amped Wireless Creator : Metadata Date : 2017:09:15 16:27:18+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 76 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10401 bytes, use -b option to extract) Instance ID : uuid:11143ef0-4171-4f34-bbbc-dbb3dad91a4f Document ID : xmp.did:32FC6A475751E711A251BD81EE8BA229 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:433d2959-af27-451e-952b-9123f6c7e442 Derived From Document ID : xmp.did:33CECA1F5AF5E6119622C7AE8E32AC9C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:F77F117407206811818C85DF6A1A75C3, xmp.iid:F4CBB9B7DEA8DF119CD2D5D617E62685, xmp.iid:2139DD18AFA9DF1187989215F681EB83, xmp.iid:467BB2CF79AADF119D7D8D3D65AFF696, xmp.iid:28E7D7AF63C8DF118ED8C8770561A43A, xmp.iid:2AE7D7AF63C8DF118ED8C8770561A43A, xmp.iid:1021A3F1EAD0DF11A24EA4D0BAA9256D, xmp.iid:1F3291662703E011987EA2742DC86DD7, xmp.iid:3686EE6F571CE011943D97A9548209CD, xmp.iid:EF5CF75B031DE011A743EBD63087DDFD, xmp.iid:CAB804E5151DE011A791A651417E705A, xmp.iid:E032D81D4E35E011BB95FF550D49F3AC, xmp.iid:CD82354D45D3E011BA968D3E36968328, xmp.iid:CF82354D45D3E011BA968D3E36968328, xmp.iid:6313169A83D9E0119A33E96FC22071D2, xmp.iid:6513169A83D9E0119A33E96FC22071D2, xmp.iid:6BB8F34894D9E01190D8CB5986B7DF04, xmp.iid:F005A66339DAE0118446ACFF899E2DFE, xmp.iid:A938DD3156DDE0118F40904C436C2A8D, xmp.iid:75BD722C16E3E011A683FD78C1059E72, xmp.iid:9D396793DC04E111926E93D0AADC138F, xmp.iid:AB891ADA5E14E111A663CFE0694B5D58, xmp.iid:B267700EC237E111A908AF160E31B47A, xmp.iid:1A4F03B63B5EE111988E9A21218FF9B5, xmp.iid:720F3A00EB90E211AC029B9C6E008672, xmp.iid:42F356E17B91E211ACCA9D72C8EF6650, xmp.iid:F5622868B191E2119C1E958993B62CEA, xmp.iid:E297FFE72DB7E211AC0B92E997D53760, xmp.iid:6798D335F7B7E2118F2986C7FEB483A3, xmp.iid:5C783A3632C3E211BEA7E92D3EB1C267, xmp.iid:BC688A37823FE411A8C3C8338C7FE0D6, xmp.iid:24DBDC0F9455E411878C9892F112D361, xmp.iid:F312F0F984FDE411959DAC2230BCBF44, xmp.iid:0F6B4DFB4BFEE411B1ABEDCBCBBFEA2B, xmp.iid:CEE670340204E511B1FDE82F893C2427, xmp.iid:1E903D731616E51182EEE4EB5F87E9DD, xmp.iid:0B20E7EBB8C3E6119A129FACDFEBA75A, xmp.iid:0D20E7EBB8C3E6119A129FACDFEBA75A, xmp.iid:33CECA1F5AF5E6119622C7AE8E32AC9C, xmp.iid:32FC6A475751E711A251BD81EE8BA229 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:27 14:40:42-07:00, 2010:08:15 21:33:56-05:00, 2010:08:16 22:25:34-05:00, 2010:08:17 22:36:39-05:00, 2010:09:24 22:13:52-07:00, 2010:09:24 23:14:07-07:00, 2010:10:05 21:20:32-07:00, 2010:12:08 16:13:55-08:00, 2011:01:09 17:17:48-08:00, 2011:01:10 15:25:29-08:00, 2011:01:10 16:01:09-08:00, 2011:02:10 12:23:33-08:00, 2011:08:30 13:19:02-07:00, 2011:08:30 17:13:47-07:00, 2011:09:07 12:00:07-07:00, 2011:09:07 13:40:02-07:00, 2011:09:07 13:59:32-07:00, 2011:09:08 11:02:05-07:00, 2011:09:12 10:01:18-07:00, 2011:09:19 16:21:59-07:00, 2011:11:01 15:55:21-07:00, 2011:11:21 09:34:11-08:00, 2012:01:05 09:24-08:00, 2012:02:23 09:08:40-08:00, 2013:03:19 17:03:15-07:00, 2013:03:20 10:29:57-07:00, 2013:03:20 17:11:27-07:00, 2013:05:07 09:06:21-07:00, 2013:05:08 13:08:36-07:00, 2013:05:22 16:10:26-07:00, 2014:09:18 17:49:40-07:00, 2014:10:16 17:25:13-07:00, 2015:05:18 11:58:44-07:00, 2015:05:19 11:00:13-07:00, 2015:05:26 16:52:02-07:00, 2015:06:18 17:02:18-07:00, 2016:12:16 10:58:33-08:00, 2016:12:16 11:50:04-08:00, 2017:02:17 13:43:31-08:00, 2017:06:14 16:42:50-07:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : \\192.168.10.198\Amped\PM Folder\Logo\01_solo\AmpedWireless_Logo_transparent_white.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - RTA2200T\SetupGuide\00_images\setupwizard\01_00_00_welcome_mobile.png, \\192.168.10.198\Amped\PM Folder\PM\Dan\00_Stocks\Technology Mocks\iPhone\iPhone6-_front_black.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\SetupGuide\00_images\00_ssw_00_02_scan.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\ProductImages\01_main_right\B1900EX_main_right_3000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - RE1300M\SetupGuide\00_images\00_ssw_00_00_dashboard_notconnected.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - RE2200T\SetupGuide\00_images\chrome_ui.png, C:\Users\kimsun\Desktop\router_not_setup.png, C:\Users\kimsun\Documents\ampedwireless_work\SR10000\Setup Guide\00_images\New folder\DoNotsetupSS.PNG, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\SetupGuide\00_images\00_ssw_01_04_00_sum_A.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\SetupGuide\00_images\01_01_00_countdown_POPUP.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\SetupGuide\00_images\00_ssw_00_06_extnet_02_blankfield.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\SetupGuide\00_images\00_ssw_00_03_sec.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\RE1900A\ProductImages\v2\06_top_leds\RE1900A_top_leds_3000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\ProductImages\01_main_right\B1900EX_main_right_3000.png, C:\Users\Amped\Desktop\IOS_9_Homescreen.png, D:\ampedwireless_work\REC10\Setup Guide\00_images\00_reference\ios_wifi_select.PNG, \\192.168.10.198\Amped\PM Folder\PM\Dan\00_Stocks\Technology Mocks\iPhone\iPhone6-_front_black.png, D:\ampedwireless_work\TAN1\Product Images\tablet_2000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\ProductImages\04_back\B1900EX_back_3000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\a - B1900EX\ProductImages\02_main_front\B1900EX_main_front_3000.png, \\192.168.10.198\Amped\PM Folder\PRODUCTS\000_HowItWorksDiagram\assets_jesse\HIW_House.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 612.285156 Max Page Size H : 2661.732422 Max Page Size Unit : Pixels Font Name : Arial-BoldMT, HelveticaNeueLTStd-BdEx, HelveticaNeueLTStd-LtEx, HelveticaNeueLTStd-Lt, HelveticaNeueLTPro-Bd, HelveticaNeueLTPro-BdEx, HelveticaNeueLTPro-Lt, HelveticaNeueLTPro-LtEx, HelveticaNeue-Roman, HelveticaNeue-Light, MyriadPro-Regular, Lato-Black, Lato-Heavy, SFUIDisplay-Light, Roboto-Regular, TrebuchetMS-Bold Font Family : Arial, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue, Helvetica Neue, Myriad Pro, Lato, Lato, SF UI Display, Roboto, Trebuchet MS Font Face : Bold, 73 Bold Extended, 43 Light Extended, 45 Light, 75 Bold, 73 Bold Extended, 45 Light, 43 Light Extended, 55 Roman, 45 Light, Regular, Black, Heavy, Light, Regular, Bold Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Type 1, Type 1, Open Type, TrueType, TrueType, Open Type, Open Type, Open Type Font Version : Version 6.90, OTF 1.029;PS 001.000;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.000;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, 001.102, 001.002, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.015; 2015-08-06; http://www.latofonts.com/, Version 2.015; 2015-08-06; http://www.latofonts.com/, 12.0d0e2, Version 1.00000; 2011, Version 5.14 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arialbd.ttf, HelveticaNeueLTStd-BdEx.otf, HelveticaNeueLTStd-LtEx.otf, HelveticaNeueLTStd-Lt.otf, HelveticaNeueLTPro-Bd.otf, HelveticaNeueLTPro-BdEx.otf, HelveticaNeueLTPro-Lt.otf, HelveticaNeueLTPro-LtEx.otf, hlr.PFB; hlr.pfm, hll.PFB; hll.pfm, MyriadPro-Regular.otf, Lato-Black.ttf, Lato-Heavy.ttf, SF-UI-Display-Light.otf, Roboto-Regular.ttf, trebucbd.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 376 C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 59.375000 Swatch Groups Colorants Magenta : 89.453101 Swatch Groups Colorants Yellow : 0.781298 Swatch Groups Colorants Black : 0.000000 Producer : Adobe PDF library 9.00 Page Count : 3EXIF Metadata provided by EXIF.tools