Bilian Electronic BL-LW05-2M 3070-8D mould User Manual BL LW05 2M

Shenzhen Bilian Electronic Limited 3070-8D mould BL LW05 2M

Contents

user manual

BL-LW05-2MBL-LW05-2MBL-LW05-2MBL-LW05-2MProduct FeaturesProduct descriptionProduct Specifications Spotlight:◎ Exceptional wireless speed up to 150Mbps ◎ Wireless security encryption easily at a push of QSS button ◎ Supports sony PSP for online gameSoftware SpecificationStandards IEEE 802.11n,IEEE 802.11g, IEEE 802.11bWireless Signal Rates With Automatic Fallback 11g: Up to 54Mbps11n: Up to 150Mbps11b: Up to 11MbpsFrequency Range 2.4-2.4835GHzWireless Transmit Power 15dBm(MAX EIRP)Modulation Type OFDM/CCK/16-QAM/64-QAM130M: -68dBm@10% PER108M: -68dBm@10% PER54M: -68dBm@10% PER11M: -85dBm@8% PER6M: -88dBm@10% PER1M: -90dBm@8% PERWork Mode Ad-HocInfrastructureWireless SecuritySupport Operating System Windows 2000/XP/Vista/Win764/128 bit WEPWPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)Package Size：Net weight (g) 375g 420gGross weight (g) Cubic meter(mm)Pcs/box CartonBulk150 340*185*20mm◎ 150Mbps wireless transmission rate ◎ Provides two methods of operation: Infrastructure and Ad-Hoc ◎ Quick Secure Setup, complies with WPS for worry free wireless security ◎ Supports 64/128-bit WEP, complies with 128 bit WPA standard(TKIP/AES), supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X ◎ Supports Sony PSP for online game ◎ Supports Windows 2000/XP/Vista/Win7 OS ◎ Seamlessly compatible with 802.11b/g/n devicesCertifications CE, FCCOperating Temperature 0 C~40 C (32℉~104℉)Storage Temperature -40 C~70 C (-40℉~158℉)Relative Humidity 10% ~ 90%, non condensationStorage Humidity 5%~95% non-condensingDimensions 37.5*15mmHardware Specification° °° °Complied with Windows 2000/XP/Vista/Win7ADD: B-LINKELECTRONICFACTACTORY, GUANLAN TOWN, SHENZHEN, CHINATEL:0086-755-81599535 FAX:0086-755-28029002 Website:www.lefen.comTO the InternetWireless RouterUSB Wi reless LANRt3070Chipset14.8 mm39.4 mm1.0 mmUSB 802.11N 150M WIRELESS Module This product is designed to provide a high-speed and unrivaled wireless performance for your computer. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. This product Lite N USB Adapter complies with IEEE 802.11g, and IEEE 802.11b standards. It can perfectly interoperate with all the 802.11n/g/b devices. This product auto-sensing capability allows high packet transfer rate of up to 150Mbps for maximum throughput. Additionally, this product supports QSS function, which can help you create a wireless connection with effortless security setup, to prevent outside intrusion and protect your personal information from being exposed. Featuring high performance transmission rates, simple installation and adaptability, as well as strong security, this product Lite N USB Adapter is a perfect solution for small office and home need.Receiver Sensitivity(without Standards antenna)
FCC ID: GGOBL-LW05-2M This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC:10295A-BLLW052M The device complies with industry Canada license-exempt RSS standard(s).Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." Company: Shenzhen Bilian Electronic Limited Product: 3070-8D mould Model: BL-LW05-2M(3070-8D) country of origin: China Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement The modular is comply with any applicable RF exposure requirements. RF exposure restriction: 20cm
If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: GGOBL-LW05-2M." The Grantee may either provide such a label, an example of which must be included in the application for the equipment authorization, or, must provide adequate instructions along with the module which explains this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. The following exposure warning must be observed in the OEM design. Additionally, the statement must be placed in the user’s manual of the end product.

Navigation menu