BioSensics AP004 Medical Alert and Activity Monitor User Manual Use manual pt2
BioSensics LLC Medical Alert and Activity Monitor Use manual pt2
Contents
- 1. Use manual pt2.pdf
- 2. User manual pt1.pdf
Use manual pt2.pdf
ActivePERS TM Medical Alert and Activity Monitoring PRODUCT DESCRIPTION TM ActivePERS is a battery powered, water resistant, medical alert transmitter designed for use with a smartphone and compatible TM apps (requires Bluetooth 4.0). ActivePERS is supplied with a magnetic clasp lanyard and is designed to be worn around the neck. TM ActivePERS is sealed to ensure water-resistance. TM IMPORTANT: ActivePERS will arrive in a low-power mode and will TM not function until activated and registered through an ActivePERS compatible app (see “Quick Start” below). TM IMPORTANT: The ActivePERS battery is not replaceable. The pendant should be discarded at the end of its battery life or be sent to BioSensics for refurbishment. US patents #8,206,325, #9,005,141, and other patents pending. QUICK START TM ActivePERS will arrive in a mode designed to save power during TM shipping. In this mode, ActivePERS will not detect falls or send messages of any kind. TM To register ActivePERS : TM 1. Install and run an ActivePERS compatible app on your smartphone. For a list of compatible apps and devices see www.activepers.com. TM 2. Go to ActivePERS > My ActivePERS and click Register ActivePERS™ 3. Remove Pendant from Packaging 4. Press and hold the button until the light turns green, then release the button TM 5. Follow the on-screen prompts to register your ActivePERS pendant. BioSensics strongly recommends that the user test the pendant by pressing the button. The recommended frequency of testing is once a week. When the battery power is low, the pendant needs to be replaced immediately. USING ActivePERSTM The following instructions apply only to devices that have been activated and registered. TM Wearing ActivePERS : TM • ActivePERS should be worn around the neck like a necklace. TM The fall detection feature of ActivePERS will not work properly if TM ActivePERS is not worn around the neck. WARNING: ActivePERS LANYARD CLASP CONTAINS A RARE EARTH (NDFEB) MAGNET. NDFEB MAY INTERFERE WITH THE FUNCTION OF CARDIAC PACEMAKERS AND IMPLANTABLE CARDIOVERTERDEFIBRILLATOR (ICDS). INDIVIDUALS WITH SUCH DEVICES SHOULD EXERCISE CAUTION WHEN WEARING ACTIVEPERS AND KEEP THE LANYARD CLASP BEHIND THE NECK AREA AT ALL TIMES. Sending an alert signal: TM • To send an alert signal press and release the ActivePERS button. TM The light on the front of the ActivePERS sensor will turn green when a message is successfully sent. Fall Detection: TM • When a fall is detected, the red light on the front of the ActivePERS sensor will start blinking (it may take up to 6 seconds for the light to start blinking after a fall). • The light will blink for about 15 seconds before sending an alert signal to the smartphone. The light will turn solid red to indicate when the alert message has been sent. TECHNICAL SPECIFICATIONS • Dimensions: 2.1” x 1.4” x 0.6” • Enclosure Material: ABS plastic and silicone • Battery: Non-rechargeable Lithium battery • Battery Life: >1 year under normal usage • Water resistance: IPX5 – safe for showering and bathing • Weight: 1.0 oz. • Sensor: Accelerometer • Wireless: Bluetooth Low Energy (Bluetooth 4.0) • Wireless Range: Up to 75’ indoors and 300’ outdoors • Features: Fall detection, step counting, non-usage detection TM Bluetooth is a registered trademark of Bluetooth SIG Inc. ActivePERS is a trademark of BioSensics. All Rights Reserved. Designed in Massachusetts by BioSensics. Assembled in the USA. WARRANTY & DISCLAIMER Warranty: This device is not intended to be changed or modified by the user. Any changes or modifications to the device will void warranty and could void the user’s authority to use this device. For details please visit www.activepers.com/warranty TM Terms & Conditions: The use of ActivePERS is subject to the terms and conditions found at: www.activepers.com/terms and in the Terms and Conditions document TM Disclaimer: ActivePERS does not detect falls with perfect accuracy or precision. If the user needs help, the user must always push the pendant button if he/she is able to. If user needs help, the user must briefly press the button. The signal range of the pendant button may vary due to changing environmental factors. Copyright © 2016 BioSensics LLC. ActivePERS™ is a trademark of BioSensics. All rights reserved. Designed in Massachusetts by BioSensics. Assembled in the USA. US Patents #8,206,325, #9,005,141, and other patents pending.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Create Date : 2016:12:20 18:55:14-05:00 Metadata Date : 2016:12:20 18:55:14-05:00 Modify Date : 2016:12:20 18:55:14-05:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:b6875f20-4d9c-4d8d-a5bc-1256688425fc Original Document ID : xmp.did:C99DC4E1592068118A6DB51A6417BDC2 Document ID : xmp.id:04073940-04bf-e049-ba30-5d5060fe65d8 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:12:20 18:55:14-05:00 Derived From Instance ID : xmp.iid:b830fc90-891a-5046-b239-5f546ff7f23b Derived From Document ID : xmp.did:C99DC4E1592068118A6DB51A6417BDC2 Derived From Original Document ID: xmp.did:C99DC4E1592068118A6DB51A6417BDC2 Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Mode : FullScreen Page Count : 8 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools