Cardinal Health Commercial Technologies FUSE005 Medicine pill dispenser User Manual
Cardinal Health Commercial Technologies, LLC Medicine pill dispenser
User Manual
© 2017 Cardinal Health. All Rights Reserved. CARDINAL HEALTH, the Cardinal Health LOGO and INPOWER are trademarks of Cardinal Health and may be registered in the US and/or in other countries. Document #: 36-6522 Version #: 2 Phone: 1-855-946-7697 (1-855-9IN-POWR) Rev. A 2017-08 Cardinal Health 1500 Waukegan Road Waukegan, IL 60085 Distributed by: A separation distance of at least 20 centimeters should be maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Any changes or modifications made to this product not expressly authorized by the manufacturer could void the user’s right to operate this device. Cat. FUSE-005 General Warnings and Precautions • WELLNESS SYSTEM The device is not waterproof, therefore: o Do not immerse the device in water. o Do not allow the device to become wet. o Do not place the device in a wet or humid area. • Do not place unused pods near the front of the Pod Pal while the Pod Pal is in use. This will cause delays in the software functionality. Pod Pal Instructions for Use • Ensure there are no vibrating devices or equipment on the same surface as the Pod Pal. • Only use the InPower™ medication pods provided to you by Cardinal Health. • Do not subject device to strong shocks, such as dropping on the floor. • Do not overload power outlets. Plug the device into the appropriate voltage outlet. Intended Use: The InPower™ Pod Pal device is intended to be used with the InPower™ pharmacy software. The Pod Pal weighs and programs the InPower™ medication pods. Refer to the InPower™ Pharmacy Software Learning Guide for information on how to use the Pod Pal with the InPower™ Pharmacy Software. • Do not plug or unplug the power cord from the electrical outlet with wet hands. • Keep lid closed when not in use to prevent damage to the internal scale. • Allow two hours for the device to acclimate to the temperature and humidity of its new environment after being unpacked and placed in the pharmacy. Feature Descriptions 1. Power adapter input: Receives power from the wall socket via the included AC/DC power adapter. Connect one end of the power adapter to the wall and the other end to the Pod Pal. Power specifications: ANS: Input: 120V AC 60Hz, Output: 5V DC 450mA. 2. USB input: Enables two-way communication between the Pod Pal and the computer via the included USB cord. Connect one end of the USB cord to the Pod Pal and the other end to the computer. 3. Pod bay: Place a medication pod inside the pod bay when adding, checking or fixing fills. 4. Pod holder: Holds the pod properly in place. Ensure the bottom of the pod is completely nested against the pod bay. InPower™ Pod Pal side view 5. Cover: Hinged cover (lid) must be closed when weighing pods during fills to ensure more accurate weight readings. The cover does not need to be closed during Check and Fix Fill process, unless you are re-weighing the pods. Keep the cover closed when the Pod Pal is not in use. Operating Instructions Maintenance & Disposal 1. Place the Pod Pal device on a flat, level, stable surface near a power outlet and the computer accessing the InPower™ Pharmacy Software. • Do not attempt to service or repair the Pod Pal device. 2. Plug the power adapter into the Pod Pal while holding the device. 3. Plug the power adapter into a power outlet. 4. Plug the USB cable into the Pod Pal while holding the device. • Do not use if maintenance is required. • Do not dispose of the device. Return it to Cardinal Health instead. Help Information • If experiencing issues with the Pod Pal, try the following: 5. Plug the USB cable into the computer accessing the InPower™ Pharmacy Software. o Ensure the bottom of the pod is completely nested against the pod bay. 6 Refer to the InPower™ Pharmacy Software Learning Manual for software use instructions. Cleaning o Ensure the USB cable and power adapter are completely plugged in • Clean the exterior surfaces of the Pod Pal using a soft cloth, an alcohol pad or a disinfectant wipe. • Do not use harsh chemicals to clean the device. • Do not immerse the device in any fluid or allow fluid to enter through the USB or power adapter ports. o Refresh the Pharmacy Software screen. o Disconnect the USB cable from the computer and reconnect. • If issues persist, contact Cardinal Health Technical Support at 1-855-9IN-POWR (1-855-946-7697).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Create Date : 2017:09:19 15:55:39-04:00 Metadata Date : 2017:09:19 15:55:40-04:00 Modify Date : 2017:09:19 15:55:40-04:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:d9b7e62d-5844-2649-ba4c-0e9bc810e8f1 Original Document ID : xmp.did:fe43597a-9807-4aa2-a454-7086e9c789c7 Document ID : xmp.id:74bbafac-e14c-4d52-aeb0-fce80fc15ea1 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:09:19 15:55:39-04:00 Derived From Instance ID : xmp.iid:78bbe815-8dee-4cc8-b3dd-a3f6808195b3 Derived From Document ID : xmp.did:fe43597a-9807-4aa2-a454-7086e9c789c7 Derived From Original Document ID: xmp.did:fe43597a-9807-4aa2-a454-7086e9c789c7 Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools