ChipSiP Technology CWFB201-XXX 5G+2.4G 2T2R AP FMC User Manual

ChipSiP Technology Co.,Ltd. 5G+2.4G 2T2R AP FMC

Contents

user manual

  8F-1, No.186, Jian-yi Road, ChungHo City, Taipei County, Taiwan Zip 235 TEL (886)-2-8227-1799 FAX (886)-2-8227-1798 E-mail Sales@ChipSiP.com http://www.ChipSiP.com  Brief Datasheet  PRODUCT::::    CWFB201 DESCRIPTION::::      802.11a/b/g/n  2x2  Full  Mini  Card  (  FMC  )  AP Module     Approved Signatures   Contact Person::::
 802.11a/b/g/n FMC     March, 2011 Rev 0.4    Chipsip Solution is a small-sized, 802.11n AP board FMC ( Full Mini Card Form Factor) that achieves a data rate up to 300Mbps. It is 6 times faster than the legacy 11abg.  This product supports AP/Bridge mode. It is ideal for multi-purpose installation to share wireless connection.  By supporting 64/128-bits WEP, TKIP, WPA, WPA2 and WPS, helps protect your data and privacy during transmission.  This module could be mounted on system board like IPTV, STB, Media Player, Femto, XDSL, Cable Modem, Industrial PC, Ethernet Switch, Printer Server, Connected TV, Smart Phone And Portable CPE For WiMAX/LTE      No could be configured as iNIC function to support driver loading from host platform     Ralink Chipset with interface with Fast Ethernet Turbo MII, Gigabit Ethernet GMII,, USB & UART….    Boot from Flash    Date Rate up to 300Mbps  Security: 64/128-bits WEP, TKIP,WPA, WPA2, AES       Standard IEEE 802.11 a/b/g/n  Wireless LAN  2T2R mode ( 5GHz 2x2 MIMO or 2.4GHz 2x2 MIMO ) Antenna iPex Connector *2 52-pin Interface  GMII/ MII *1 ( Turbo MII mode )   USB*1 ( Host mode ) UART*1 GPIO Reset to Default   VCC/GND  Frequency Range 802.11a 5.15~ 5.85GHz 802.11b/g 2.4~2.484GHz 802.11n  2.4~2.484GHz  and  5.15GHz~  5.85  GHz  (  Subject  to  local regulations) Data Rate 802.11b: 1, 2, 5,5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Description Features Specification
 802.11a/b/g/n FMC     March, 2011 Rev 0.4  Transmit Power +/- 2dBm (EIRP)   11n HT40 MCS7 : +14dBm 11b : +17dBm 11gn :+15dBm     11a : +13dBm Receiver Sensitivity 11an/gn -66dBm at HT40 ( MCS7 ) 11an/gn -67dBm at HT20 ( MCS15 ) 11a/g -72dBm at 54Mpbs 11b -80dBm at 11Mpbs Range  Indoors: up to10~ 25 meters   Dimension Full Mini Card ( FMC )Form Factor  510x260x2.5mm Certifications FCC/CE by request   Software function   Network Features:  DHCP Client/Relay/Server  Dynamic DNS    NTP Client    DNS Cache/Proxy    Firewall 1. MAC/IP/Port Filter 2. Virtual Server  3. DMZ 4. Content Filter  WiFi:  20MHZ/40MHZ bandwidth.  Support Multiple SSID  Clock rate up to 600MHz and High Throughput Modes.  Support WPS    High security with build-in: WEP 64/128, TKIP, WPA, WPA2, AES mixed,802.1x and 802.11i  802.1X Authentication with RADIUS Client    QoS-WMM.WMM-PS   Golden Finger & Connector Information : Pin definions of Mini Card could be used for standard mini PCI-e in PC/NB as well. Leverage unsed pins for WiFi, Ethernet, control and VCC signals.
 802.11a/b/g/n FMC     March, 2011 Rev 0.4  PIN DEFINITION Pin Number  Signal  Pin Number Signal 51  UART_RX  52  +3.3Vaux 49  UART_TX  50  GND 47  A/G band  48  +1.26V 45  WPS_PBC/Reset to default  46  NC 43  GND  44  NC 41  +3.3Vaux  42  WLAN_LED 39  +3.3Vaux  40  GND 37  GND  38  USB0_DP 35  GND  36  USB0_DN 33  MII_TXCLK  34  GND   31  MII_TXEN  32 NC 29  GND  30 NC 27  GND  28  +1.26V 25  MII_TXD0  26  GND 23  MII_TXD1  24  +3.3Vaux 21  GND  22 PERST#      ( HW RST_N ) 19  MII_TXD2  20 WPS LED 17  MII_TXD3  18  GND —  Mechanical Key  —  Mechanical Key 15  GND  16 NC 13  MII_RXCLK  14 NC 11  MII_RXDV  12 AP/client (SW RST) 9  GND  10 MII_MDIO 7  MII_RXD0  8 MII_MDC 5  MII_RXD1  6  +1.26V 3  MII_RXD2  4  GND 1  MII_RXD3  2  3.3Vaux
 802.11a/b/g/n FMC     March, 2011 Rev 0.4    Evaluation Test Board
 802.11a/b/g/n FMC     March, 2011 Rev 0.4  Mini Card Connector
 802.11a/b/g/n FMC     March, 2011 Rev 0.4  Mechanical Dimension:
Labeling The RF module for controller labeled as below. The label that is placed on the module is too small to hold the required FCC information, then that information appear in the user manual for this device. In addition, the” Contains FCC ID: O7N-CWFB201-XXX” label also must be placed on the outside of the end product system.

Navigation menu