ChipSiP Technology CWFB201-XXX 5G+2.4G 2T2R AP FMC User Manual

ChipSiP Technology Co.,Ltd. 5G+2.4G 2T2R AP FMC

Contents

user manual

Download: ChipSiP Technology CWFB201-XXX 5G+2.4G 2T2R AP FMC User Manual
Mirror Download [FCC.gov]ChipSiP Technology CWFB201-XXX 5G+2.4G 2T2R AP FMC User Manual
Document ID1786218
Application IDV0RuMDXOSLP7tgXKM24MKQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize60.63kB (757851 bits)
Date Submitted2012-09-08 00:00:00
Date Available2012-09-14 00:00:00
Creation Date2012-02-14 22:27:05
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2012-09-07 09:55:56
Document TitleMicrosoft Word - 11abgn 2x2 AP FMC CWFB201 20120208 V1.0.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: AceLiu

8F-1, No.186, Jian-yi Road, ChungHo City, Taipei
County, Taiwan Zip 235
TEL (886)-2-8227-1799 FAX (886)-2-8227-1798
E-mail Sales@ChipSiP.com
http://www.ChipSiP.com
:
:
:
Brief Datasheet
PRODUCT:
:
DESCRIPTION:
:
CWFB201
802.11a/b/g/n 2x2 Full Mini Card ( FMC ) AP
Module
Approved Signatures
Contact Person:
:
802.11a/b/g/n FMC
Description
Features
Chipsip Solution is a small-sized, 802.11n AP
board FMC ( Full Mini Card Form Factor) that
achieves a data rate up to 300Mbps. It is 6 times
faster than the legacy 11abg.
This product supports AP/Bridge mode. It is
ideal for multi-purpose installation to share
wireless connection.
Ralink Chipset with interface with Fast
Ethernet Turbo MII, Gigabit Ethernet
GMII,, USB & UART….
Boot from Flash
Date Rate up to 300Mbps
Security: 64/128-bits WEP, TKIP,WPA,
WPA2, AES
By supporting 64/128-bits WEP, TKIP, WPA,
WPA2 and WPS, helps protect your data and
privacy during transmission.
This module could be mounted on system
board like IPTV, STB, Media Player, Femto,
XDSL, Cable Modem, Industrial PC, Ethernet
Switch, Printer Server, Connected TV, Smart
Phone And Portable CPE For WiMAX/LTE
No could be configured as iNIC function to
support driver loading from host platform
Specification
Standard
Wireless LAN
Antenna
52-pin Interface
Frequency Range
IEEE 802.11 a/b/g/n
2T2R mode ( 5GHz 2x2 MIMO or 2.4GHz 2x2 MIMO )
iPex Connector *2
GMII/ MII *1 ( Turbo MII mode )
USB*1 ( Host mode )
UART*1
GPIO
Reset to Default
VCC/GND
802.11a 5.15~ 5.85GHz
802.11b/g 2.4~2.484GHz
802.11n 2.4~2.484GHz and 5.15GHz~ 5.85 GHz ( Subject to local
regulations)
Data Rate
802.11b: 1, 2, 5,5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps
March, 2011 Rev 0.4
802.11a/b/g/n FMC
Transmit Power +/- 2dBm
(EIRP)
Receiver Sensitivity
Range
Dimension
Certifications
11n HT40 MCS7 : +14dBm
11b : +17dBm
11gn :+15dBm
11a : +13dBm
11an/gn -66dBm at HT40 ( MCS7 )
11an/gn -67dBm at HT20 ( MCS15 )
11a/g -72dBm at 54Mpbs
11b -80dBm at 11Mpbs
Indoors: up to10~ 25 meters
Full Mini Card ( FMC )Form Factor 510x260x2.5mm
FCC/CE by request
Software function
Network Features:
 DHCP Client/Relay/Server
 Dynamic DNS
 NTP Client
 DNS Cache/Proxy
 Firewall
1. MAC/IP/Port Filter
2. Virtual Server
3. DMZ
4. Content Filter
WiFi:
 20MHZ/40MHZ bandwidth.
 Support Multiple SSID
 Clock rate up to 600MHz and High Throughput Modes.
 Support WPS
 High security with build-in: WEP 64/128, TKIP, WPA, WPA2, AES
mixed,802.1x and 802.11i
 802.1X Authentication with RADIUS Client
 QoS-WMM.WMM-PS
Golden Finger & Connector Information :
Pin definions of Mini Card could be used for standard mini PCI-e in PC/NB as well. Leverage unsed pins for
WiFi, Ethernet, control and VCC signals.
March, 2011 Rev 0.4
802.11a/b/g/n FMC
PIN DEFINITION
Pin Number
Signal
Pin Number
Signal
51
UART_RX
52
+3.3Vaux
49
UART_TX
50
GND
47
A/G band
48
+1.26V
45
WPS_PBC/Reset to default
46
NC
43
GND
44
NC
41
+3.3Vaux
42
WLAN_LED
39
+3.3Vaux
40
GND
37
GND
38
USB0_DP
35
GND
36
USB0_DN
33
MII_TXCLK
34
GND
31
MII_TXEN
32
NC
29
GND
30
NC
27
GND
28
+1.26V
25
MII_TXD0
26
GND
23
MII_TXD1
24
+3.3Vaux
21
GND
22
PERST#
19
MII_TXD2
20
WPS LED
17
MII_TXD3
18
GND
—
Mechanical Key
—
Mechanical Key
15
GND
16
NC
13
MII_RXCLK
14
NC
11
MII_RXDV
12
AP/client (SW RST)
GND
10
MII_MDIO
MII_RXD0
MII_MDC
MII_RXD1
+1.26V
MII_RXD2
GND
MII_RXD3
3.3Vaux
( HW RST_N )
March, 2011 Rev 0.4
802.11a/b/g/n FMC
Evaluation Test Board
March, 2011 Rev 0.4
802.11a/b/g/n FMC
Mini Card Connector
March, 2011 Rev 0.4
802.11a/b/g/n FMC
Mechanical Dimension:
March, 2011 Rev 0.4
Labeling
The RF module for controller labeled as below.
The label that is placed on the module is too small to hold the required FCC
information, then that information appear in the user manual for this device. In
addition, the” Contains FCC ID: O7N-CWFB201-XXX” label also must be placed
on the outside of the end product system.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : AceLiu
Create Date                     : 2012:02:14 22:27:05Z
Modify Date                     : 2012:09:07 09:55:56+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : AceLiu
Title                           : Microsoft Word - 11abgn 2x2 AP FMC CWFB201 20120208 V1.0.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:09:07 09:55:56+08:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:a61fedf7-63bc-4489-bcce-2176291d683f
Instance ID                     : uuid:1d959b9c-15b3-4aac-ae69-243922798637
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O7N-CWFB201-XXX

Navigation menu