Corning Optical Communication 1RXU REMOTE EXTENDER UNIT User Manual Installation

Download:
Mirror Download [FCC.gov]
Document ID	2067431
Application ID	A77300I1OH7H12Rc43I2RA==
Document Description	Installation User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.14kB (314296 bits)
Date Submitted	2013-09-10 00:00:00
Date Available	2013-09-13 00:00:00
Creation Date	2013-07-12 10:04:01
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-07-12 10:04:01
Document Title	Installation User Manual
Document Creator	Adobe InDesign CS6 (Macintosh)

RxU
Remote Expansion Unit
Quick Installation Sheet
Corning ONE™ Wireless Platform
CMA-261-AEN
GENERAL INFORMATION
1.
2.
RxU expands the RAU band support to two additional MIMO bands.
RxU is assembled in the RAU enclosure (hot pluggable).
This document describes the installation procedure for the ONE™ Remote Expansion Unit (RxU).
1.
PACKAGE CONTENTS
Check your package contents to verify that the items in the packing list are included:
• Item		
Quantity
Remote Expansion Unit (RxU)
Item
2.	Assemble Rxu in rau enclosure
Note:
There is no need to disconnect the composite
cable fiber and DC wires leading from the
ceiling.
Step 1:
Remove the screw securing the bracket safety
tab to the RAU (located above MGMT port).
Step 2:
Slide the RAU back into wide end of bracket
screw holes so that it “clicks,” and remove unit.
Step 3:
Unscrew (five) screws securing the RAU
enclosure cover and remove cover.
See Figure 1 for location of screws.
QUICK INSTALLATION SHEET | CMA-261-AEN | JULY 2013 | PAGE 1 OF 2
Unit
Remove Three Screws
Remove
Screw
Remove
Screw
Remove Front Flap
Figure 1. Removing RAU Enclosure Cover
ONE™ Wireless Platform
Step 3: 	Plug the RxU in to the right side of the RAU as
indicated in Figure 2. RxU and RAU interface
ports should face the same direction.
Step 4:
3.
RxU
Module
Replace the cover except for the front panel
and screws, as shown in Figure 3
RF CONNECTIONS
If required by site planner – connect the filter to
the RF filter connectors on the RxU. Refer to
Figure 3 for location of RAU and RxU filter
connections.
Figure 2. RxU Module Assembly
To External Filter
To MIMO Service
Antenna
To External Filter
4.
ASSEMBLE RAU FRONT ACCESS
PANEL AND REMOUNT
RxU
RAU
Figure 3. Assembled RxU Interfaces
5.
VERIFY NORMAL OPERATION
Step 1:
Verify that LEDs on front cover indicate
normal operation status:
•
RUN – Blinking green
•
POWER – Steady green
•
LINK – Steady green
Run LED
Power LED
Link LED
Refer to Figure 4 for LEDs.
6.
ASSEMBLE RAU FRONT ACCESS
PANEL AND REMOUNT
Figure 4. RAU Enclosure LEDS
Corning MobileAccess, Inc. • 13221 Woodland Park Road, Suite 400 • Herndon, Virginia 20171 USA
866-436-9266 • FAX: 703-848-0280 • Tech Support Hotline: 410-553-2086 or 800-787-1266 • www.corning.com/mobileaccess
Corning MobileAccess reserves the right to improve, enhance and modify the features and specifications of Corning MobileAccess products without prior notification. ONE is a trademark of Corning
Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners. Corning MobileAccess is ISO 9001 certified. © 2013 Corning MobileAccess. All rights reserved.
Published in the USA. CMA-261-AEN / July 2013
QSG_GENII_RxU_709C012501_RevA00_19MAR13FINAL
QUICK INSTALLATION SHEET | CMA-261-AEN | JULY 2013 | PAGE 2 OF 2
ONE™ Wireless Platform

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2013:07:12 10:04:01-04:00
Metadata Date                   : 2013:07:12 10:04:01-04:00
Modify Date                     : 2013:07:12 10:04:01-04:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:9817b6d0-8071-3e46-801b-be15490941f1
Original Document ID            : xmp.did:4BF0D29C3A206811822AA7057B9D1D49
Document ID                     : xmp.id:B0BCBA83072068118083D93CBEDE19C9
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:AFBCBA83072068118083D93CBEDE19C9
Derived From Document ID        : xmp.did:9085F3D42E206811822AFD07FDF2C384
Derived From Original Document ID: xmp.did:4BF0D29C3A206811822AA7057B9D1D49
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2013:07:12 10:04:01-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools