Harman Becker Automotive Systems BE2728 BLUETOOTH AUTOMOTIVE INFOTAINMENT UNIT User Manual Antenna App Note
Harman Becker Automotive Systems, Inc. BLUETOOTH AUTOMOTIVE INFOTAINMENT UNIT Antenna App Note
Contents
- 1. Antenna App Note
- 2. Users Guide
Antenna App Note
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1454989 |
| Application ID | F6Wc8sSHmzS5ZfdHXS3C5A== |
| Document Description | Antenna App Note |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.61kB (557579 bits) |
| Date Submitted | 2011-04-27 00:00:00 |
| Date Available | 2011-05-11 00:00:00 |
| Creation Date | 2003-01-24 15:15:11 |
| Producing Software | Acrobat PDFWriter 5.0 for Windows NT |
| Document Lastmod | 2003-01-24 15:20:49 |
| Document Title | bcant-an-001Pa BlueCore Inverted-F and Meander Line Antenn… |
| Document Creator | Microsoft Word |
| Document Author: | sm01 |
BlueCore™ Inverted-F and Meander Line Antennas Application Note January 2003 CSR Unit 400 Cambridge Science Park Milton Road Cambridge CB4 0WH United Kingdom Registered in England 3665875 Tel: +44 (0)1223 692000 Fax: +44 (0)1223 692001 www.csr.com bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Contents Contents Introduction.......................................................................................................................................................................3 Inverted-F Antenna .........................................................................................................................................................4 Meander Line Antenna ...................................................................................................................................................5 Real Designs.....................................................................................................................................................................6 Proximity to Metal Objects ...........................................................................................................................................7 Proximity to Dielectric Materials.................................................................................................................................8 Network Analyser............................................................................................................................................................9 Final Tuning ................................................................................................................................................................... 10 Conclusion ..................................................................................................................................................................... 12 Acronyms and Definitions ................................................................................................................................................. 13 Record of Changes.............................................................................................................................................................. 14 List of Figures Figure 2.1: Inverted-F Antenna...............................................................................................................................................4 Figure 3.1: Meander Line Antenna.........................................................................................................................................5 Figure 3.2: Input Impedance of Two Meander Line Antennas ...........................................................................................5 Figure 4.1: Approximate Dimensions of Inverted-F Antenna.............................................................................................6 Figure 4.2: Approximate Dimensions of Meander Line Antenna.......................................................................................6 Figure 7.1: Preparation Before Measurement......................................................................................................................9 Figure 7.2: Assembled System Ready to Measure.............................................................................................................9 Figure 8.1: Locating Product in Far Field of Antenna....................................................................................................... 10 Figure 8.2: Final Tuning Procedure .................................................................................................................................... 11 bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 2 of 14 BlueCore™ Inverted-F and Meander Line Antennas Introduction Introduction This document outlines two types of Printed Circuit Board (PCB) antennas used by CSR. § Inverted-F § Meander Line bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 3 of 14 BlueCore™ Inverted-F and Meander Line Antennas Also discussed in this document is the effect of placing metallic or dielectric materials near an antenna. Inverted-F Antenna Inverted-F Antenna Quarterwave Figure 2.1: Inverted-F Antenna The inverted-F is a quarterwave antenna. It is bent into an L-shape. The shorter side is connected to earth. The longer side is left open circuit at the end. The feed point is located somewhere between the earth end and the open end. The resulting structure resembles the letter F and possesses the properties of both a loop antenna due to the circulating current from the feed point to ground and a whip antenna due to the open circuited straight section. In the PCB version the antenna is printed on the top layer and a ground plane is placed near the antenna on the top layer. There must not be a ground plane underneath the antenna. The aim is to make the quarterwave section resonate at midband frequency (which is 2441MHz for Bluetooth™). The feed point (which is the input/output connection) is connected to the L-Shape at the point corresponding to 50Ω. Experiment with measurement to determine correct location for the feed point and length of this antenna. bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 4 of 14 BlueCore™ Inverted-F and Meander Line Antennas Input Output Meander Line Antenna Meander Line Antenna Input Output Figure 3.1: Meander Line Antenna The length of the meander line antenna is difficult to predict. It is usually a bit longer than a quarterwave but dependent on its exact geometry and proximity to the ground plane. Note: In Figure 3.1 the ground plane is shown in black. S is the distance from the ground plane. See Figure 4.2 for approximate dimensions. This type of antenna is always a PCB version. The antenna is printed on the top layer and a ground plane is placed near the antenna on the top layer. There must be no ground plane underneath the radiating section of the antenna. Smith Chart Figure 3.2: Input Impedance of Two Meander Line Antennas The real part of the impedance of this antenna is about 15-25Ω, depending on geometry and proximity to the ground plane. The impedance matching is done by adjusting the length of the antenna until the input impedance is at the unity conductance circle (when normalised to 50Ω), in the top half of the Smith chart (Point A). A shunt capacitor is then connected between the antenna input and ground to match to 50Ω (Point B). Experimental measurement is used to determine the correct design. bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 5 of 14 BlueCore™ Inverted-F and Meander Line Antennas Ground Plane Real Designs Real Designs 18.0mm 13.5mm 5 .0mm Not to scale Ground Plane Actual Size Figure 4.1: Approximate Dimensions of Inverted-F Antenna 1.0mm 8 .0 mm 1.5mm 4.4mm Width=0.5mm 2.8mm 1.7mm Not to scale Ground Plane 1.5pF Capacitor Placed immediately after Feedpoint Feedpoint Actual Size Figure 4.2: Approximate Dimensions of Meander Line Antenna bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 6 of 14 BlueCore™ Inverted-F and Meander Line Antennas 6 .0mm Width=0.8mm Proximity to Metal Objects Proximity to Metal Objects CSR recommends keeping metal objects as far away from the antenna as possible. Keeping metallic objects out of the near field is usually adequate. Near Field = 2D2 / λ Notes: λ is the wavelength of the signal in freespace. At Bluetooth frequencies, λ=122mm in freespace. Substituting D=λ/4 into the Near Field equation gives Near Field = λ/8. Near Field = 122/8 mm = 15.25mm. bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 7 of 14 BlueCore™ Inverted-F and Meander Line Antennas D is the largest dimension of the antenna. In the case of these antennas, this is approximately a quarterwave (λ/4). Proximity to Dielectric Materials Proximity to Dielectric Materials Dielectric materials (like plastic or FR-4) detune an antenna by lowering its resonant frequency. The effect is not as serious as placing an antenna next to metal objects and can be corrected by reducing the length of the antenna. Therefore it is important for the antenna to be tuned when it is in the product. This is done during the development of the product. BlueCore™ Inverted-F and Meander Line Antennas bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 8 of 14 Network Analyser Network Analyser A Vector Network Analyser (VNA) is used to perform the initial tuning of the antenna: The PCB track (trace), just before the antenna matching network is cut to isolate the filter and previous stages from the measurement. 2. A coaxial cable is connected between the VNA and the PCB of the product. The outer conductor of the coaxial cable is soldered to the ground plane of the PCB as close as possible to the input of the antenna matching network. The inner conductor of the coaxial cable is left floating. The coaxial cable must have ferrite beads over the outer sleeve of the coaxial cable. The ferrite beads help to prevent RF currents from flowing on the outside of the coaxial cable (which would disturb the measurement). 3. A One-Port calibration is performed on the VNA with Open, Short, Loads connected at the end of the coaxial cable inside the product. 4. The inner conductor of the coaxial cable is soldered to the input of the antenna matching network. 5. The antenna is tuned by adjusting the values of any “matching network” components, the feed point of the antenna or the length of the antenna until the S11 trace (displayed on the VNA) is at the centre of the Smith chart at the midband frequency 2441MHz. 6. The antenna is now roughly tuned and the cut track can be repaired by putting a small amount of solder over the cut. Figure 7.1: Preparation Before Measurement Figure 7.2: Assembled System Ready to Measure bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 9 of 14 BlueCore™ Inverted-F and Meander Line Antennas 1. Final Tuning Final Tuning After tuning the antenna using the VNA procedure, it is necessary to perform fine tuning. This will yield a small improvement and will be the final optimisation of the antenna. It is best to perform this procedure in an anechoic chamber, but when this is not possible an indoor or outdoor test range can be used. It is important to minimise radio signal reflections. Avoid metallic objects such as lab-benches, filing cabinets, lampposts and cars. BlueCore™ Inverted-F and Meander Line Antennas Figure 8.1: Locating Product in Far Field of Antenna bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 10 of 14 Final Tuning Connect omni directional receive antenna to a spectrum analyser Place fully assembled Bluetooth product approximately 2m away from receive antenna Put Bluetooth product into continuous transmit BlueCore™ Inverted-F and Meander Line Antennas Watch power level of received signal on the specturm analyser while moving receive antenna ±10cm in each of x,y,z planes to ensure it is not located in a null point. A sudden dip in received power indicates a null point Yes Is antenna located in a null point? No Rotate Bluetooth product around in the x,y,z planes until the maximum power level is observed on the spectrum analyser. This ensures that the dominant polarisation mode of the antenna is measured. No Has the maximum possible power level been observed on the spectrum analyser? Yes Record power level observed on the spectrum analyser. Turn off Bluetooth product, disassemble it and make adjustments to length of antenna, feed point or matching components Reassemble Bluetooth product and place it in the same location and orientation as before No Has the maximum receive power been obtained? Yes End of procedure Repeat process on multiple devices to ensure results are repeatable Figure 8.2: Final Tuning Procedure bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 11 of 14 Conclusion Conclusion Metal objects should be kept at least 15.25mm away from the Inverted-F and Meander Line types of antennas in the Bluetooth frequency band in order for the antenna to work efficiently. If that is not possible, then extra experimentation is required to determine an acceptable trade-off between antenna performance and product size. bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 12 of 14 BlueCore™ Inverted-F and Meander Line Antennas Even if these rules are followed, antenna detuning can occur. Usually the resonant frequency of the antenna will be lowered. This can be corrected by reducing the length of the antenna. Acronyms and Definitions Acronyms and Definitions Group term for CSR’s range of Bluetooth chips Bluetooth Set of technologies providing audio and data transfer over short-range radio connections CSR Cambridge Silicon Radio PCB Printed Circuit Board RF Radio Frequency VNA Vector Network Analyser bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. BlueCore™ Inverted-F and Meander Line Antennas BlueCore Page 13 of 14 Record of Changes Record of Changes Date: Revision 24 JAN 03 Reason for Change: Original publication of this document. (CSR reference bcant-an-001Pa). Inverted-F and Meander Line Antennas Application Note bcant-an-001Pa January 2003 Bluetooth™ and the Bluetooth logos are trademarks owned by Bluetooth SIG Inc, USA and licensed to CSR. BlueCore is a trademark of CSR. All other product, service and company names are trademarks, registered trademarks or service marks of their respective owners. CSR’s products are not authorised for use in life-support or safety-critical applications. bcant-an-001Pa © Copyright CSR 2003 This material is subject to CSR’s non-disclosure agreement. Page 14 of 14 BlueCore™ Inverted-F and Meander Line Antennas BlueCore™
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:01:24 15:15:11Z Modify Date : 2003:01:24 15:20:49Z Page Count : 14 Page Mode : UseOutlines Page Layout : SinglePage Creation Date : 2003:01:24 15:15:11Z Author : sm01 Producer : Acrobat PDFWriter 5.0 for Windows NT Mod Date : 2003:01:24 15:20:49Z Metadata Date : 2003:01:24 15:20:49Z Title : bcant-an-001Pa BlueCore Inverted-F and Meander Line Antenn… Creator : sm01EXIF Metadata provided by EXIF.tools