Huawei Technologies ETS1270 Fixed Wireless Terminal User Manual ETS1270 backup

Huawei Technologies Co.,Ltd Fixed Wireless Terminal ETS1270 backup

User Manual

NoticeCopyright © 2008 Huawei Technologies Co., Ltd.All Rights Reserved1No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.2Trademarks3 and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders. 4Notice5The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, expressed or implied.Huawei Technologies Co., Ltd.Address:6Administration Building, Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, P. R. ChinaPostal Code: 518129Website: http://www.huawei.com
1Table of Contents 1Introduction 1Packing List ................................................1Front View ..................................................1Rear View ...................................................2Installation 3Installing the Battery...................................3Installing the UIM Card...............................3Installing the Power Adapter ......................4Installing the Indoor Antenna......................4Connecting the Terminal ............................4Viewing the Signal Strength .......................6Mounting the FWT......................................6General Functions 7Booting the FWT ........................................7Making or Answering Calls.........................7Adjusting the Voice Volume .......................7Advanced Functions 9Supplementary Services ............................9Internet Services ........................................9Facsimile Function (Optional)...................10Troubleshooting 11Warnings and Precautions 121Table of Contents
11Introduction1Introduction Packing List Note • The local radio signal strength helps you select an indoor antenna. • To access the Internet, you need to purchase the required data suite. For more information, please consult your local sales agent. Front View Note The figures are only for your reference, please refer color and shape to product.The main ports on the host are described as follows:The LEDs on the host are described as follows:Item QuantityFWT host 1Power adapter 1Phone cable 1Battery (Rechargeable) 1Certificate of Quality 1User Guide 1NO. Item1FWT switch2Telephone port 13Telephone port 24Data port5DC input6Antenna port78910123456
Rear View2 Rear ViewNO. Item7Signal strength indicators: More indica-tors indicate stronger signal strength.8Battery indicatorThe battery serves as the only power supply (without external power adapter):•In blue: The battery is in full electricity.•In red: The battery is in medium electric-ity.•In red with blinking: The battery needs to be recharged.The external power adapter is in use (with the battery inside):•In red: The battery is being charged.•In blue: The battery is fully charged.9Power indicatorIn blue: The FWT is connected with the power adapter.10 Operating status indicatorIn blue: The FWT is in work.No. Item1Wall-mounting brackets2R-UIM card slot3Battery container4Battery port5Battery container cover54 321
32Installation2Installation Note Before installing or removing the battery, indoor antenna, or R-UIM card, you need to swich off the FWT and disconnect the FWT from the power adapter. To prevent lighting from injuring human body. Installing the Battery Note • When the ambient temperature exceeds the temparature allowed for charging, the system will stop charging the battery.• When the power adapter is in use, the FWT will automatically charge the battery and stop charging when the battery is fully charged.• Remove the battery if the FWT is left unused for a long period.• Make sure that the battery has been charged for more than 8 hours before it supplies power for the FWT at the first time. The charging time depends on the environmental temperature and battery life.Insert the connection cable of the battery into the bat-tery port (make sure the battery is correctly inserted), and then seat the battery in the battery container. Installing the UIM Card Note • Consult the local agent to determine whether to install the UIM card or not.• The UIM card and contact point are vulnera-ble to damage such as scarring or bending, so you need to insert or remove it with care.Insert the card into the card slot. Put the side with a corner cutting backwards and the side with a golden contact downwards. Make sure the card is completely inserted into the slot.
Installing the Power Adapter4 Installing the Power AdapterIn normal conditions, the FWT relies on the external power adapter for power supply. 1Make sure that the FWT is switched off. 2Insert one end of the power adapter into the DC input port, and the other end into the power sup-ply jack. 3Switch on the FWT and wait for a few seconds. If the power indicator is in blue, the connection is correct.Use the battery only in the case that the electricity has failed or the external power adapter is unavail-able. You must make sure that the battery has been fully charged before putting it into use. Installing the Indoor Antenna 1Make sure that the FWT is switched off. 2Align the indoor antenna with the antenna port on the FWT host in the direction shown in the fig-ure, and then screw the antenna, ensuring that the connection is secure. Connecting the Terminal Note • Switch off the FWT and disconnect the power adapter.• Use the cable provided by the manufacturer.• The FWT can be connected to a telephone and a PC at the same time, but the voice and data services cannot be used simultaneously. You can use only one service at a time.
Connecting the Terminal 52InstallationConnecting the FWT to a TelephoneThe FWT provides two telephone ports. They are in parallel connection and use the same number.Connecting the FWT to a Facsimile Set Note Please affirm that your FWT supports facsimile before using this function. Connecting the FWT to a PCAfter purchasing the data service suite, you can use data services by connecting the FWT to a PC, and maintain and debug the FWT on the PC. For details, consult your local agent.
Viewing the Signal Strength6 Viewing the Signal StrengthPower on the FWT and wait until some signal strength indicators are on or until you can hear the dial tone.• If all signal strength indicators remain off for 5 minutes and only the re-dial tone is heard. No signals can be received. • Turn the antenna but all signal LEDs still keep off. The signal quality is very poor. If the dial tone can be heard in some area, position the antenna towards it.The required signal strength is level 1 or above. Note If the signal strength is in level 1 or 2, the signal strength indicators of level 1 or 2 should be on for 80 percent of the time. Mounting the FWTHorizontal MountingPlace the FWT on a smooth surface with cool air and good ventilation. Keep the FWT away from other objects around for at least 10 cm.Vertical MountingFix two wall screws into the wall with the screw heads extending approximately 3 mm from the surface of the wall, align the mounting brackets with the screws, push the host towards the wall, and mate the brack-ets with the screws, ensuring the host is stable. Number of Idi-cators Are OnSignal Level Signal Strength0 0 Poor1 1 OK2 2 Good
73General Functions3General Functions Booting the FWTThe boot process of the FWT will last about 20 sec-onds. Then you can view the signal strength. Note If the signal strength indicators remain off, the FWT may be faulty or the network is not cov-ered the area. Please consult the local agent. Making or Answering Calls 1Before off-hook, make sure at least one signal strength LED is on. 2Dial the number in either of the following ways:• Dial a telephone number in a regular way, and the number will be dialed out in several seconds.• Dial all the digits of the number plus one #. The FWT will immediately dial the number. 3Make sure to hook on the telephone in place, so that you can receive calls. Note • Enter ##58*n# to set the wait time for auto dial-out of the FWT, where n is in the range 0 to 9. Setting n to 0 will disable the function. Otherwise, the FWT will automatically dial out your desired number in n seconds. By default the wait time is 7 seconds.• To validate the auto dial-out wait time func-tion, you must restart the FWT. • The dial interval between two consecutive numerals cannot exceed the wait time for auto dial-out of the FWT.• When you use supplementary services, you may dial the numbers starting from * or # , you can dial the number in a regular way with the wait time of auto dial-out as non-0. Adjusting the Voice VolumeYou can adjust the voice volume either when the tele-phone is in standby mode or working mode. Four vol-ume levels are available, with level 1 being the lowest and level 4 the highest.
Adjusting the Voice Volume8Adjusting the Volume in Standby Mode 1Hook off and you can hear the dial tone, which means the telephone service is available. 2Press ##1 to adjust the volume. 3Press keys from 1 to 4 to select the desired vol-umn. The keys from 1 to 4 represents volumn level from 1 to 4. 4After selecting the desired volume, press * key to save it. If you hear the confirmation tone of a "toot", you have successfully set the volume level. 5You can hear the dial tone again, which means that the FWT has returned to the off-hook state, and you can proceed to make other operations. Note If you hear the reject tone of "toot, toot", you have pressed an incorrect key. The syetem will return to the off-hook state, and you can retry to make the setting after hearing the dial tone again.Adjusting the Volume During a Call 1If you are in a session with the remote party, you can press ##1 to adjust the volume. 2Press keys from 1 to 4 to select the desired vol-umn. The keys from 1 to 4 represents volumn level from 1 to 4. 3After selecting the desired volume, press * key to save it. If you hear the confirmation tone of a "toot", you have successfully set the volume level. 4Keep in session mode. Note If you hear the reject tone of "toot, toot" when setting the volume, you have pressed an incor-rect key and this setting attempt is failed. How-ever, the session mode remains and you can perform operations from Step 1 to 4 to adjust the volume again.
94Advanced Functions4Advanced Functions Supplementary ServicesYou need the network carrier to enable the services. Here are several typical services for your reference:Three-Way Calling, Call Transfer, Call Forwarding, Emergency Call. Internet ServicesInstall the modem driver and management program before the first use. 1Connect the FWT to a PC with a compatible data cable. The system finds the new hardware and installs the modem driver automatically. 2Wait for a while, and then the installation inter-face is displayed. Follow the instructions. 3When the installation completes, a shortcut icon displays and the FWT is restarted. 4Double-click the shortcut icon, and then you can make the following options.Configuring the Network ConnectionBefore accessing the Internet, you need to configure the network connection. If you want to apply the default settings, you can skip operations in this sec-tion. 1Click Properties, enter the phone number (by default, the phone number is #777.) 2On the General tab, select ETS modem in the Connect Using box. 3On the Options tab, select "Prompt for name and password certificate, etc." Creating a New Connection 1Click New. Then follow the instructions to select the connection type, the device that will be used to make the connection. 2Enter the phone number and the name of the new connection. Click Finish.
Facsimile Function (Optional)10Dialing Up to the InternetSelect a connection or create a new connection. Then Click Connect. If the user name and password are correct, you can connect to the Internet. Note The connection rate shown after the dial-up is connected may be the connection rate of the data port. For details, consult your carrier. Facsimile Function (Optional) Note • The function requires the network support. The success rate of sending or receiving is related to the performance of the network.• When using the facsimile function, do not use other services.• Here, only the brief introduction of using the facsimile set is provided. For detailed options, refer to the instructions of relevant facsimile sets.• In certain network conditions, the FWT sup-ports the voice to facsimile function, that is, you can operate in normal mode to send or receive a facsimile. For details, consult your carrier.Sending a FacsimileDial the number, with ##0 before the number and * after the number. After hearing "toot", press send but-ton.It is recommended that the called party configure the auto-receive mode.Receiving a Facsimile 1Dial ##36* and after the "toot", the FWT is in fac-simile receive mode. 2Exit from facsimile receive mode:• Dial ##30* and wait the sound of "toot".• Restart the FWT. Note You can make a call or send a fax when the FWT is in facsimile receive mode, but you can-not answer a call.
115Troubleshooting5TroubleshootingThe FWT is not connected to a power adapter. The switch of the FWT is switched on, but the battery indi-cator and the operating status indicator is still off.Check whether the battery is installed.If the battery is installed, the problem may result from low power supply of the battery. Please charge the battery.Connect the power adapter to the FWT, switch the FWT, but the power indicator remains off.Check whether the output voltage of the power adapter meet the requirement of the FWT.Switch on the FWT, the power indicator is in normal state, but all signal strength indicators are off.Check whether the antenna is correctly installed.The signal strength indicator is in normal state, but no dial tone is heard after off hook.Check the connection between the telephone and the FWT.The voice is unstable and discontinuous.Check how many signal indicators are on. If less than 1 are on, the network signal is weak. Move the FWT to a position with stronger signal. The signal strength may be led by environmental interference. For details, consult the carrier.The volume is too loud or too low.Following the "Adjusting the Volume during a call"The facsimile cannot be received.Configure the FWT to facisimile receive mode.Answering a call fails.Check if the FWT is in facisimile receive mode. Please exit from this mode first.Sending a facsimile fails (pressing the send key after hearing the sound of "toot")It may be caused by the following reasons:1. The network signal is weak.2. You have dialed a wrong fax number.3. The called party has configured manually receiving mode but not started receiving.4. The called party is busy.The handfree function cannot be used.If an FWT is connected with two phones at the same time, and one is in use, the other phone's handfree function may not work. You can use the handset.The modem driver can not be installed automatically.1. Restart your FWT.2. Make sure the FWT is powered on and the USB cable is well connected.3. Make sure your operating system is Windows 2000, Windows XP, or Vista (32-bit or 64-bit).4. Check your computer, if there is a virtual CD-ROM, right-click it and select 'open'. Then you can find the ETS_setup.exe and double-click it to start the installation.5. If the above methods cannot help you, contact your local dealer.
126Warnings and PrecautionsTo use the FWT correctly and safely, read the following cau-tions and let your children know these before using the FWT. Basic Cautions• According to the packing list, check items in the package box to make sure that they are complete and undamaged.• Before installing and using the FWT, read this user guide carefullyElectronic DevicePower off your FWT near high-precision electronic devices. The FWT may affect the performance of these devices.Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer and confirm whether the radio waves affect the operation of the electronic device.HospitalPay attention to the following points in hospitals or health care facilities:• Do not take your FWT into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU)• Power off your FWT near medial devices• Observe any instructions wherever the use of wireless device is prohibitedTraffic Safety•Do not use your FWT while driving. Secure the FWT on its holder. Do not place the FWT on the seat or other places where it can get loose in a sudden stop or collision.•Observe the rules and regulations of airline companies. Power off your FWT before boarding an aircraft.Operating Environment•Do not place magnetic storage media such as magnetic cards and floppy disks near the FWT. Radiation from the FWT may erase the information stored on them.• Do not put your FWT, battery, or other accessories in con-tainers with strong magnetic field, such as the induction cooker and microwave oven. Otherwise, circuit failure, fire, or explosion may result.• Do not place or use the FWT, the battery or the power adapter near any heat sources such as fire or a heater; or places with flammable gases; or areas with electrical appli-ances that give out heat. Otherwise, it will cause fire, explo-sion and breakdown of the FWT.• Because the FWT needs to eliminate heat during working, put the FWT and the power supply in a ventilated and shad-owy place. Never airproof the FWT or put something on it or place it near water, fire as well as inflammable and explo-sive materials.• Because the FWT contains precision devices, you should put it in a dry place and away from moist materials.• Before cleaning the FWT, please power off the FWT, and then disconnect the power supply and take out the battery. Before moving the FWT, please disconnect the external power supply.
136Warnings and Precautions• Do not subject your FWT, battery, and power adapter to seri-ous collision or shock. Otherwise, battery leakage, FWT malfunction, overheats, fire, or explosion may result.• Do not place sharp metal objects such as pins near the ear-piece. The earpiece may attract these objects and hurt you when you are using the FWT.• Do not place the FWT in the area over the air bag or in the air bag deployment area. Otherwise, the FWT may hurt you owing to the strong force when the air bag inflates.• In raining and lightning, disconnect the power adapter from external power supply and power off the FWT.• Put your FWT, battery, and power adapter in places beyond the reach of children. Do not allow children to use the FWT, battery, or power adapter without guidance.• Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the FWT to operate at a power level higher than needed.• The network signal condition will directly affect the quality and stability of the call. Consequently, you should place the FWT in a place where it can receive network signal well. Do not put FWT in a building with an iron or metal roof. The dis-tance between FWT and other metal materials (such as metal brackets or metal doors and windows) should be greater than 25cm and the distance between FWTs should be greater than 30cm.• Do not open the chassis in any case and the device should be maintained by a qualified maintenance department.• Without permission, you are not allowed to modify the archi-tecture and security design of FWT. You must bear any con-sequence resulted from the operation without permission.•Your FWT is designed to conform to the authoritative inter-national radio frequency (RF) specifications. Use FWT accessories approved by Huawei only.•The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all per-sons.•Please observe the national local regulations in the location where product is to be used. This product may be restricted for use in some or all countries of European Union.Emergency CallYou can use your FWT for emergency calls. However, connec-tions in all conditions cannot be guaranteed. You should never rely solely on the FWT for essential communications.Battery• If the battery fluid gets into eyes, do not rub them. Wash with clean water and seek medical assistance immediately.• If the battery fluid contacts skin or cloth, wash with clean water immediately to avoid irritation to the skin.• Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode.• When installing the battery on your FWT, do not push the battery by force lest battery fluid leak out or the battery crack.• Do not connect two poles of the battery with metallic materi-als such as cables.
14• Do not disassemble the battery or solder the battery poles. Otherwise, fluid leakage, overheat, fire, or explosion may result.• If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open flame to avoid fire or explosion.• Disconnect the power adapter and take out the battery when the FWT is not used for a long time.• Do select its self-contained complete battery and power adapter; otherwise, the FWT may be spoiled. Huawei Tech-nologies Co., Ltd is not responsible for any consequences caused by using non-standard batteries or power supplies. Dispose of used batteries according to the instructions.• Dispose of the battery according to local laws or regulations.Power Adapter•Use AC power as specified for the power adapter. Any viola-tion of this rule may result in fire or malfunction of the power adapter.• Do not short-circuit the power adapter. Short-circuiting the power adapter may cause fire or malfunction of the power adapter.• Remove the dust on the power plug regularly.• Do not use worn-out power cords. Otherwise, electric shock, short-circuiting of the power adapter, or fire may result.• Do not put the power adapter near the container filled with liquid such as water. If the liquid comes into the power adapter, electrical leakage or other faults may result.• If the liquid such as water comes into the power adapter accidentally, remove the plug of the power adapter from the socket immediately.• Disconnect the power adapter from the socket before clean-ing or maintaining it. Otherwise, electric shock or short-circuiting of the battery or power adapter may result.• Ensure the plug of the power adapter is properly inserted into the power socket when charging the battery. Improper insertion may result in electric shock, fire, or explosion.•Do not place any heavy object on the power cord of the power adapter. Do not damage, change, or pluck the power cord.Using the USB CableWhen using the USB cable, observe the following require-ments. Otherwise, the FWT or PC may fail.• When the USB cable is used to connect the FWT to a PC, connect the USB cable with the FWT first.• When the FWT communicates with a PC, do not disconnect the USB cable with the FWT or PC may fail.• When disconnecting the USB cable, disconnect it from the PC first.Environmental ProtectionPlease abide by the local laws in proposing of the package materials of your FWT, consumed batteries and used FWT, and try to recycle them.FCC Statement
156Warnings and PrecautionsThis device complies with Part 15 of the FCC Rules. Opera-tion is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital Device, pursuant to Part 15 of the FCC rules.Version: V100R001_01 Part Number: 31019618

Navigation menu