Kenetics Innovations HH-MR3 Volare HH-MR3 Reader User Manual
Kenetics Innovations Pte Ltd Volare HH-MR3 Reader
User Manual
Kenetics HH-MR3 Reader Quick Start Guide Document Version: 1.00 Release: 2016 Jan Prepared By: Zou QiZhang Approved By: 1 Packing Lists, Accessories and CD-Rom Contents 1.1 1.2 Basic Packing List 1 x HH-MR3 Reader 1 x CD-ROM 1 x USB cable 1 x rechargeable 7.2V battery pack Accessories AC/DC Universal Power adapter (Universal 100V/240V AC to 12 VDC, 1A) 1.3 CD-Rom Contents Software User Guide Front View Back Side 43 mm Bottom Figure 1.1 HH-MR3 Reader 2 2.1 Details on Front Face and Menu Navigation Front Face Information Front Face Information Reference Figure LCD Power LED Indicator (Red color) Activity LED Indicator (Blue color) Keypad Buttons √ Figure 6.1 8 rows, 16 characters per row. When lighted: Normal State: On When operating: On / Blinks When lighted: Normal State: Off When operating: On / Blinks Enter/Accept button: To exit demo mode, or execute a function. On button: To turn on the unit, press and release the OK button Off button: To turn off the unit, press and hold the OK button until the LCD and the LED go off. Cancel Esc/Back button: To back-up to a parent menu or to clear memory and restart a scanning action. Next Item: To scroll forward the items in a menu or to scroll forward a list of categories. Previous Item: To scroll backward the items in a menu or to scroll backward a list of categories. Scan tags button: There are two such buttons on the side of the HH-MR3. It is used to activate the RF power for scanning tags. 3 Getting Started – Install and charge the battery Step 1: Remove Battery Cover Step 2: Align the base of battery pack with the base of battery compartment before inserting the battery pack. Connector side 7.2 volts Battery base Slide down Step 3: Slide the battery pack up so that the connector clicks into place. Replace the Battery Cover. Step 4: Use an AC/DC adaptor to supply 12 VDC to charge the battery for at least 3 hours. Red LED will blink when charging is in progress. Red LED will stop blinking when charging is complete. 3.1 Switch the reader on and off To switch the reader on, press and hold the power key <√> until you see the red LED is on. If the LCD displays “Battery Low”, please charge the reader. To switch the reader off, press and hold the power key <√> for 2 seconds. 3.2 Standby Mode A blank screen overwrites the display when no function of the reader has been used for a certain period of time, unless the reader is connected to USB/Bluetooth/WIFI or Charger. To deactivate the screen saver, press and hold the <√> button for one second. Scan Functions 4.1 Scan Functions without USB/Bluetooth/WIFI Connection 4.1.1 Guide for UID Scanning Kenetics HH-MR3 V1.0 06 Jan 16 Waiting for Xxxxxxxxxxxxxxx Xxxxxxxxxxxxxxx Press X to exit 1.Press and hold down buttons to start scan tags 2.Direct reader to tag while holding down the buttons. Press “X” 3. Release buttons to stop scan tags SCANNED 0000 Demo mode 4.2 Scan Functions with USB/Bluetooth/WIFI Connection Note: Before use the Bluetooth/WIFI ,need to connect the reader to PC with USB cable, then configure the reader with “ILT Tool” in the CD. Refer to document “Item Level Tagging User Guide-Ver 2.0.docx” found in CDROM. 4.2.1 USB connection stet up procedure 4.2.1.1 Power on the reader 4.2.1.2 Connect the reader to PC with USB cable 4.2.1.3 Install the reader driver with “atm6124_cdc_signed”in the CD (only for the first time) 4.2.1.4 After the driver installed successfully, there will be a new comport in “Computer->Manage->Device Manger->Port(COM&LPT)”. 4.2.2 Bluetooth connection stet up procedure 4.2.2.1 Power on the reader 4.2.2.2 Connect to PC with USB cable, run” ILT Tool” (only for the first time) 4.2.2.3 Follow document” Item Level Tagging User Guide-Ver 2.0.docx” to open comport and set PIN code and set Wireless communication module to Bluetooth in setting tab control(only for the first time). 4.2.2.4 Close ” ILT Tool” and plug out USB cable (only for the first time) 4.2.2.5 Install a Bluetooth adapter or dongle to PC. 4.2.2.6 Click “Add a device” in “Control Panel\Hardware and Sound\Devices and Printers” to add the reader’s Bluetooth(HH-MR3) to PC(only for the first time) 4.2.2.7 Find out the comport name in “Computer->Manage->Device Manger>Port(COM&LPT)” (only for the first time) 4.2.2.8 Follow document” Item Level Tagging User Guide-Ver 2.0.docx” to open comport in ” ILT Tool” , then the Bluetooth will be connected to PC. 4.2.3 WIFI connection stet up procedure 4.2.3.1 Power on the reader 4.2.3.2 Connect to PC with USB cable, run” ILT Tool” (only for the first time) 4.2.3.3 Follow document” Item Level Tagging User Guide-Ver 2.0.docx” to open comport and set Wireless communication module to WIFI in setting tab control(only for the first time) 4.2.3.4 Close ” ILT Tool” (only for the first time) 4.2.3.5 Plug out USB cable then plug in USB cable again to PC, run” ILT Tool” (only for the first time) 4.2.3.6 Follow document” Item Level Tagging User Guide-Ver 2.0.docx” to open comport and set WIFI parameter in WIFI tab control(only for the first time) 4.2.3.7 Follow document” Item Level Tagging User Guide-Ver 2.0.docx” to close comport (only for the first time). Plug out USB cable. 4.2.3.8 Follow document” Item Level Tagging User Guide-Ver 2.0.docx” to create TCP socket with Net tab 4.2.4 Scan for UID with USB/Bluetooth/WIFI Kenetics HH-MR3 V1.0 06 Jan 16 Waiting for Xxxxxxxxxxxxxxx Xxxxxxxxxxxxxxx Press X to exit 1.Press and hold down buttons to start scan tags 2.Direct reader to tag while USB/Bluetooth/ WIFI connected holding down the buttons. 3. Release buttons to stop scan tags SCANNED 0000 Online mode 5 Compliance Statement Regulatory Notes An RFID system comprises an RF transmission device, and is therefore subject to national and international regulations. Prior to the powering and operation of the HHMR3 reader, relevant compliance certificate should be obtained from the associated watchdog agency. Sale, lease or operation in some countries may be subject to prior approval by the respective government body or other international compliance organization. For countries requiring FCC certification, a typical system configuration containing the HHMR3 reader has been tested and found to be compliant with the limits for a FCC Part 15C (intentional radiator) device. Nonetheless, it is still the responsibility of the customers to have their complete system tested and approved for use from the appropriate compliance agencies/authorities before operating or selling the system. As part of FCC part 15 compliance requirements, it should be noted that: Modifications not expressly approved by this company could void the user’s authority to operate the HHMR3 reader. The HHMR3 reader complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The HHMR3 reader may not cause harmful interference, and (2) must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 9 Page Layout : OneColumn Page Mode : UseNone Producer : doPDF Ver 7.2 Build 369 (Windows XP Professional Edition (SP 3) - Version: 5.1.2600 (x86)) Create Date : 2016:01:13 08:50:33+08:00EXIF Metadata provided by EXIF.tools