LG Electronics USA 9QK-DMPD239 Pocket Photo User Manual

LG Electronics USA Pocket Photo

User Manual

Owner’s manualPlease read this manual carefully before operating your device.MODEL :PD239, PD239W, PD239Y, PD239P, PD239T, PD239TW, PD239TY, PD239TP, PD239SPBluetooth®ENGLISH
2Safety informationCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING: Do not install this equipment in a conned space such as a book case or similar unit.CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN
3CAUTION concerning the Power CordMost appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.NOTICE: For safety making information including product identication and supply ratings, please refer to the main label inside the apparatus.NOTICE: Only use the AC adaptor supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
4CAUTION: yThe apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus. yMinimum distance around the apparatus for sucient ventilation, no less than 5 cm. yThe ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc. yNo naked ame sources, such as lighted candles, should be placed on the apparatus. yInternal lithium battery in the unit should not be replaced by user because of danger of explosion if battery is incorrectly replaced ,and must be replaced with the same type battery by expert.Disposal of your old appliance1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.4. For more detailed information about disposal of your old appliance, please contact your city oce, waste disposal service or the shop where you purchased the product.
5Disposal of waste batteries/accumulators1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of your product it means they are covered by European Directive 2006/66/EC.2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.3. All batteries/accumulators should be disposed separately from the municipal waste stream via designatedcollection facilities appointed by the government or the local authorities.4. The correct disposal of your old batteries/ accumulators will help to prevent potential negative consequences for the environment, animal and human health.5. For more detailed information about disposal of your old batteries/ accumulators, please contact your city oce, waste disposal service or the shop where you purchased the product.
6LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU.Contact oce for compliance of this product: LG Electronics Inc EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands yPlease note that this is NOT a Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product. Indoor use only.RF Radiation Exposure StatementThis equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Device operating temperatureWhen operating in cold weather, the device shall not print. Bring it inside from the cold and give about 10 min to adjust to the specied operating temperature (5 °C - 40 °C). Then try printing again. (For the appropriate use, it is recommended not to operate it outdoors in winter.) , NoteCAUTION when using this product in environments of low humidity yIt may cause static electricity in environments of low humidity. yIt is recommended to use this product after touching any metal object which conducts electricity. > Caution
7ContentsSafety information ......................2STEP 1 Getting Started ..................8Supplied items............................8Product Overview.........................8Power On / O ............................9STEP 2 Charging Battery .................9STEP 3 Inserting Photo Paper .......... 11Cleaning printer head using Smart Sheet 11Paper Jam Solution ......................12STEP 4 Installing App ................. 12Installing App for Android phone ........12App Setting ..............................13Installing App for iPhone ................14Setting Bluetooth of iPhone .............14STEP 5 Printing Photo ................. 15Printing using Android phone............15Printing using iPhone ....................18Notes on the printing.................. 20Checking Label........................ 21About LED Indicator ................... 22Specications ......................... 23Troubleshooting ...................... 24
8STEP 1 Getting StartedSupplied itemsUSB cable ChargerLG Pocket Photo PrinterZINK Photo Paper Simple manualProduct OverviewMicro USB port (for recharging) Reset holePaper exit slotPaper insert slotSwitch (Power) LED indicatorUpper cover buttona b c
9Power On / OOn: Slide the switch to direction of the arrow.O: Slide the switch to the opposite direction. yWhen turning the device on, LED indicator (c) ashes for 5 sec. Then printing is available. yFor more information, see “About LED indicator” on page 22. , NoteSTEP 2 Charging BatteryThis device uses built-in battery. Before using it, charge the battery in full. (Refer to below)Battery charging time : 1 hourChecking the charging status with LED indicators yPower-o : Charging : Full charge : y10 % : ashes for about 3 sec. y0 % : ashes for about 30 sec. and turns o. yLG Pocket Photo is always charged when connected to the power supply except for being printed.
10Charger (AC Adapter) yModel : ADS-5MA-06A 05050GPG yManufacturer : SHENZHEN HONOR ELECTRONIC CO. ,LTD. yInput : 100 - 240 V ~, 50 / 60 Hz yOutput : 5 V 0 1.0 A yHandle with care during charging to prevent electric shock. yDo not place near heating appliance. yDo not disassemble or deform. yDo not give shock on. yAvoid too high or low temperature or humidity. > Caution yYou can connect the device to PC using the supplied USB cable, but charging time can be longer. yThe operating time on battery may vary depending on the battery status, operational status and environment conditions. yWhen the battery is discharged, printing is available after charging it for more than 10 min. (Charge in full to print in a row.) , Note
11STEP 3 Inserting Photo Paper1. Open the Paper insert door.2. Unwrap the pack of the photo papers. 3. Slide Smart Sheet (Blue) and photo papers together into the Paper insert slot. Smart Sheet will be ejected automatically before rst printing. yWhen you purchased photo paper seperately, do not insert more than 1 pack (10 Photo papers and 1 Smart Sheet). Otherwise 2 papers may be ejected at once or paper jam may occur. yRell the device after using up the papers in. yWhen power is turned it on, you cannot open the cover. To open it, turn o the power.Smart Sheet with Barcode side downPhoto Paper with White side upCleaning printer head using Smart SheetSmart Sheet cleans printer head and calibrates colors on photo. Keep the best print quality by using it repeatedly.
12Paper Jam SolutionDo not pull the paper out. Turn the device o and on again, the paper will be ejected automatically.If this problem is not solved, please refer to “Troubleshooting”. yDo not forcefully pull the paper out during printing. It may result in malfunction. yDo not damage or bend the papers. yUsing soiled paper may result in malfunction. yUsing photo papers from other company may result in malfunction, paper jam or low quality. yDo not place inside a car or, expose to direct sunlight or moisture. yDo not leave in a place where the temperature or humidity is too high or low. It may reduce the quality of the printed photo. > Caution yHandle with care when you touch the paper not to get dirt on. yEnsure to use the papers within its valid date. yOnce unpacked, the papers may begin to curl up after a period of time. It is recommended to use them as soon as possible. , NoteSTEP 4 Installing App Installing App for Android phone Bluetooth®From Play Store (Android market)Search for “LG Pocket Photo”.Using QR codeScan the QR code on the product box.
13Using NFCRefer to “Printing using NFC” on page 16.App Setting Bluetooth®Set the options in [Setting]. yNFC* : Prints using NFC (NFC-enabled phone only) yBluetooth : Prints using Bluetooth yGPS** : Saves the location where you took a photo* NFC : Near Field Communication** GPS : Global Positioning System using a satelliteSee “Help” for detailsFor more information about the App, touch “Help”.
14Installing App for iPhone From App StoreSearch for “LG Pocket Photo”.Using QR codeScan the QR code on the product box.Setting Bluetooth of iPhone 1. On your iPhone’s home screen, touch [Settings].2. Touch “Bluetooth” and touch the slider to turn Bluetooth [On]. 3. To connect your Pocket Photo device to the iPhone, turn on your device and make sure it is discoverable mode. 4. When your iPhone found the device, touch the name of Pocket Photo on the iphone screen.See “Help” for detailsFor more information about the App, touch “Help”.
15STEP 5 Printing PhotoPrinting using Android phone Bluetooth®Printing using Bluetooth (Bluetooth®)Preparation : Turn the device on, and start printing with the LED indicator (c) turning on. 1. Run LG Pocket Photo App on Android phone.2. Select a photo to print, and touch [ ].3. Touch [OK], then it will start searching for Bluetooth devices.4. When LG Pocket Photo is paired for the rst time, [Bluetooth pairing request] appears. To start printing, touch [Pairing] or input the PIN code ‘0000’. yIf Smart Sheet is in the device, it will be ejected before starting printing. ,You can print photos directly from Android phones or PC via Bluetooth without the App. Choose a photo and select [Bluetooth] in [Share] or [Menu].
16Printing using NFC (Bluetooth®) Check whether your Android phone supports NFC rst. yHow to read NFC tag : Make smartphone get near to NFC tag on the device.NFC1. Tagging for the rst time, it links to Play Store where you can download LG Pocket Photo App.2. Go to [Setting] in the App installed, and check [NFC].3. Choose a photo to print and tag, then printing is started immediately. From this time, you can run the App and print a photo by just tagging.Setting Pocket Photo App of Android phoneYou can check remaining battery, the number of the photos printed, device version, MAC address, and change the setting of print mode, etc.1. Run LG Pocket Photo App on Android phone. (To check [Device information], set to [On] the Bluetooth of smartphone.)
172. Go to [Setting]. 3. Touch [Device Information].Auto Exposure Corrects color in the image. (ON/OFF)Paper Full Prints without white space. (The edge of the image can be cut o.)Image Full Prints an image as a whole. (White space can occur at the edge of the paper.)Auto Power O Set a time so that the device turns itself o. (Default is [5 min]. If you set to [O], the device can be on for up to 2.5 hours when fully charged.)
18Printing using iPhone Printing using Bluetooth (Bluetooth®)Preparation : Turn the device on, and start printing with the LED indicator (c) turning on. 1. Run LG Pocket Photo App on iPhone.2. Select a photo to print, and touch [ ].3. “Do you want to print?” message will be appeared. Touch [OK] to start printing. yIf Bluethooth is not connected, “ Paired device not found” message is appeared. (refer to the Bluetooth setting for iPhone.) yIf Smart Sheet is in the device, it will be ejected before starting printing.
19Setting iPhone Pocket Photo AppYou can check remaining battery, the number of the photos printed, device version, MAC address, and change the setting of print mode, etc.1. Run LG Pocket Photo App on iPhone. (To check [Device information], set to [On] the Bluetooth of iPhone.)2. Go to [Setting]. 3. Touch Setting options to change. Auto Exposure Corrects color in the image. (ON/OFF)Paper Full Prints without white space. (The edge of the image can be cut o.)Image Full Prints an image as a whole. (White space can occur at the edge of the paper.)Auto Power O Set a time so that the device turns itself o. (Default is [5 min]. If you set to [O], the device can be on for up to 2.5 hours when fully charged.)
20Notes on the printing yThe color of impression can be dierent between printed photo and image on smartphone’s display. yOnce the battery is fully charged, you can print up to 30 papers in a row. It depends on the battery condition. yThe Bluetooth searching and transferring may fail depending on its environment. Check the Bluetooth condition on your phone and try again. yIf there are more than a LG Pocket Photo device, check MAC address on the label to choose one you want to use. (Refer to “Checking Label” on page 21.) yDo not pull paper out by force during printing. yDo not open the paper insert door during printing. yDo not place an object at the front of the Paper exit slot. yIf the device is vibrated or given shock, the quality of the printed photo may be reduced. > Caution
21Checking LabelIn case there are more than a LG Pocket Photo device, check MAC address on the product label to choose one you want to use. When power is turned it on, you cannot open the cover. To open it, turn o the power. , Note2. You can nd the product label. yBe sure the device is o before opening. Be sure the Paper insert door is opened when you close the Upper Cover. yIt is recommended not to open the Upper cover as possible except for checking the label. yDo not detach the black rubber pad. It may cause malfunction. > Caution1. Open the Paper insert cover.
22About LED IndicatorThe LED indicators shows the device condition.a b cLED color Condition/Power Description/cWaiting/ OnWaits for printing. Device turns itself o if it is left unused for a while./aFull charge/ OTo print, turn on the device./aCharging/ OTo print, turn on the device./bError/ OnNo paper, Paper jam, Cancelled, Opened, Low temperature, Unsupported le format/aLow battery/ OnTo print, charge the device./bPrinting/ OnTransferring data via Bluetooth, PrintingCooling mode/ OnAfter continuous prints the device may automatically cool down its internal temperature. Wait for a while to print again.
23SpecicationsPhoto size 50 mm x 76 mm (Dot size : 640 x 1224)Image le type/sizePNG, JPEG (Baseline) / less than 10 MB (Progressive JPEG is not supported.)Media paper usedZINKTM Photo Paper (exclusive for LG)Media paper storage environmentTemperature : 20 - 25 °C Humidity : 40 - 55 % RHDevice operation environmentTemperature : 5 - 40 °C Humidity : less than 70 % (35 °C) (An temperature alert pops up in the App.)Optimum print environmentTemperature : 15 - 32 °C Humidity : less than 70 % (32 °C)LED indicatorPower / Waiting / Bluetooth transmitting / Charged / Discharged / Error / Condition of printerCommunicationBluetooth 4.0 + EDROperation distance : about 10 mExternal connectorMicro USB port for charging batteryBus Power Supply (USB) DC 5 V 0 1.0 ABattery life500 mAh Li-Polymer rechargeable battery Maximum 30 prints when fully chargedPower supply500 mAh Li-Polymer rechargeable battery AC adapter (DC 5 V 0 1.0 A)Image resolution More than 1280 x 2448 pixels
24Dimensions (W x D x H) 76 mm x 126 mm x 20 mmNet Weight 202 g yYour phone may be incompatible with the device depending on its manufacturer, environment or (Android or iOS) operating system. yDesign and specications are subject to change without prior notice.TroubleshootingSymptom Cause / SolutionNo power The battery is discharged.Be sure the device is connected to charger or PC properly when charging.Bluetooth paring does not work well. Switch Bluetooth o and on again on your smartphone, then pair with the device in the smartphone’s settings.Turn on the device and try printing (pairing) again in 5 sec.Be sure the device is on.
25The paper jammed before printing.1. Turn the device o and on again then paper is ejected automatically.2. If above solution does not work, open the Upper cover and arrange the papers. Then insert them with Smart Sheet (Blue) or pull the paper out slowly and gently.The paper jammed during printing.The printed photo has lines.Open the Upper cover, arrange the papers and insert them with Smart Sheet locating at the bottom. Then try printing again. (To open the Upper cover, refer to “Checking Label” on 21.)No or incomplete image is printed.The edge of the image on the photo is cut o.Set [Print mode] to [Image Full] in the App’s setting then the image is printed as a whole.White space appears at the edge of the paper.When [Print mode] is set to [Image Full], white space may appears if the aspect ratio of the paper and your image is not the same. When [Paper Full], the edge of the image can be cut o or little white space at the edge of the paper may appear.Quality of printed photo is too low.In case you magnify an image using [ ] menu in the App, the quality of the printed photo may be reduced.Turn o the device and insert Smart Sheet locating at the bottom of the papers. Then try printing again.Be sure the photo size is bigger than the proper resolution.(1280 x 2448 pixels)When using Smart Sheet, it should be used with photo papers in the same pouch.
26Device does not print.Be sure there are papers in the device.It may take time to print after Smart Sheet is ejected.Be sure the photo le is less than 10 MB. Baseline JPEG, PNG format is supported only.Device is turned o automatically.Check [Auto Power O] time in the App’s setting. Above solutions do not work.Press Reset hole with a pointed thing like mechanical pencil to initialize.
27NotesChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Cet appareil radio est conforme au CNR-210 d’Industrie Canada.L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateurdu dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.> FCC/ IC Warning經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。」第十四條：「低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。> NCC

Navigation menu