Lorex Technology M2251 2.4G Video Baby Monitor User Manual BB2411 Video Baby Monitor User s Guide

Lorex Technology Inc. 2.4G Video Baby Monitor BB2411 Video Baby Monitor User s Guide

Users Manual

www.lorexbaby.comENGLISH FRANÇAIS ESPAÑOLSWEET PEEP MAXVIDEO BABY MONITORVersion 1.0USER’S GUIDE
DC 6VSafety Precautions• Adult assembly is required. Keep small parts away from children when assembling.• This product is not a toy. Do not allow children or infants to play with it.• This video monitor is not a substitute for responsible adult supervision.• Test the video monitor before use. Become familiar with its functions.• Keep the cords out of reach from children and infants.• Never use extension cords with power adapters.• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.• Only insert batteries/battery pack of the same type.• Insert batteries with the correct polarity.• Do not mix new and used batteries.• Do not mix alkaline, standard, and rechargeable batteries.• Remove exhausted batteries from the product.• Keep all batteries away from children and infants.• Dispose or recycle batteries in accordance with local laws, which may vary by location.• If you do not plan to use the unit for a prolonged period of time, remove the battery or ensure you charge it at least once every 6 months.• Do not cover the video monitor with a towel or blanket.• Do not use the video monitor near water.• Do not install the video monitor near a heat source.• Do not touch the plug contacts with sharp or metal objects.• Keep this user’s guide for future reference.To Avoid Injury to Children & Infants:• MAKE SURE to keep the camera and all power cords are least 3ft / 1m away from cribs and out of reach of your child.• Use the included cable clips to help keep power cords away from your child.3ft / 1m
Product Includes ..............................2Monitor Overview ...........................3Camera Overview ...........................4Getting Started ...............................5Optional - Camera Batteries .....................7Optional - Wall Mounting the Camera .......8Using Your Baby Monitor ................9Using the Menus .....................................9Talking to Your Baby ..............................10Changing Channels ...............................10Using Scan Mode (multiple cameras only) ...... 10Adjusting Volume .................................. 12Adjusting Screen Brightness ....................12Using Digital Zoom................................13Turning on the Night-Light ....................... 14Playing Lullabies ...................................14Temperature Alerts ................................. 15Selecting Fahrenheit or Celsius ................16Enabling VOX Mode (Voice Trigger) ........ 17Video Off Mode (Audio Only Mode) .......18Pairing Additional Cameras ..........19Technical Specifications .................21Camera ...............................................21Monitor ................................................21Troubleshooting ............................22Need Help? ...................................22ENGLISH1Table of Contents:
2Product Includesx1*x1CameraMonitorPower Adapterx2*x2**Contents may vary by modelx1*Screws & Anchors Power Adapterx1Cable Clipsx2*LINKBatteryx1
ENGLISH3SpeakerStandBattery CompartmentAntennaMonitor OverviewLINKPower LEDLink LEDVolume LEDsMenu Power / Video Off2x Zoom / Volume Up1x Zoom / Volume DownPlay / Stop LullabiesMicrophoneTwo-way TalkChange / Pair CameraVideo Display
4DC 6VPAIRCamera OverviewLight Sensor Night-lightLensPower LEDMicrophoneAntennaNighttime LED’sMounting Stand AAA Battery CompartmentPower SwitchPower Port Temperature SensorSpeakerPair Button
DC 6VDC 6VMake sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child.ENGLISH5Getting Started12Connect the power adapter to the camera.Slide the power switch to ON. The power LED glows.Power Switch3Using a flathead screwdriver (not included), remove the battery compartment cover on the monitor.Unscrew using flathead screwdriver
Power Button7Press and hold the power button to turn onthe monitor.6Connect the power adapter to the monitor.The power LED glows.LINKLINKIf you do not plan to use the unit for a prolonged period of time, remove the battery or ensure you charge it at least once every 6 months.64Insert the included battery as shown below.5Replace the battery compartment coverand secure with screw.
Pull up to extend antenna• It is recommended to charge the battery for 6 hoursbefore use.• For overnight monitoring, it is recommended to connectthe power adapter. When fully charged, the monitor will stay on up to 6 hours in normal mode or 10 hours on Video OFF mode (see page 18).• For better reception, flip up the antenna on the monitorand camera.TipsAAA batteries are not intended for overnight monitoring. The camera can operate for up to 4 hours on battery power.Optional - Camera BatteriesUnscrew the battery compartment under the camera and insert 4x AAA batteries (not included). Replace the battery compartment door and screw.4x AAA Batteries (not included)Battery Compartment Screw• If using batteries, it is recommended to use the poweradapter whenever possible to save battery life.• The camera power adapter cannot chargerechargeable AAA batteries.NotesDC 6VLINKENGLISH7
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child.Mounting points68mm68mmCable Clips8Optional - Wall Mounting the CameraTap anchors into holes with a hammer. Insert screws 2/3 of the way. Before permanently mounting the camera: • Determine where you will get the best view of your baby. • Ensure the power cable is long enough to power the camera.1Drill 2 holes in the wall with centers exactly 68mm apart.23Align the mounting points with the screws and push the camera down.
1Press and hold to open the menuLINK2Press repeatedly to browse menu optionsLINKPress to adjust menu options3Press to save changes and exit the menuLINKENGLISH9Using Your Baby MonitorThe monitor shows the following icons during use:Icon MeaningSignal strength1Selected channelScan Scan mode activatedVolume mutedX2 Digital zoom activatedMove zoom areaSong currently playing Talk activatedIcon MeaningVOX (Voice Trigger) onBattery fullBattery lowBattery chargingBattery finished charging70°F Current room temperaturePairing channelCamera out of range or off (e.g. batteries dead)Using the Menus
Press and hold to talk to the currently selected cameraPress to cycle through connected cameras or select Scan mode.The currently selected camera is shown on screen.The monitor only plays sound from the camera that is currently being viewed.1LINK1LINKAudio from the camera is muted while using this feature.When two or more cameras are connected, you may use Scan mode to cycle through video from each camera. Each camera channel is displayed for 10 seconds. Scan 1To enable Scan mode:Using Scan Mode (multiple cameras only)Press repeatedly until Scan is shown on screenLINK10Talking to Your BabyChanging Channels C1
When Scan mode is activated, the monitor changes channel automatically every few seconds. A Scan icon appears next to the currently selected channel number.To connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 19.1 ScanCurrently selected channel Scan mode activatedLINKLINKLINKENGLISH11If you wish to only monitor some of your cameras using Scan mode, you may choose to hide certain channels. Hidden channels will not be shown in Scan mode. C1 Press to change a checkmark and an X2 C1 Press to cycle through connected cameras to the channel you wish to show or hide.1By default, each channel name has a checkmarkbeside it, which means it is enabled for monitoring and included in the viewing cycle on Scan mode.To show / hide channels in Scan mode:An X will disable video from the channel and remove it from the viewing cycle in Scan mode.
1LINKPress to adjust the volume of the monitor1Press and hold to open the menuLINK2Press repeatedly until is shownLINK3LINKPress to adjust the brightness4Press to save changes and exit menu.12Adjusting VolumeAdjusting Screen Brightness
Press to adjust the volume of the monitorPress and hold to open the menuPress repeatedly until is shownPress to adjust the brightnessPress to save changes and exit menu.3Use the arrow keys to move the zoom area.1LINKPress and holdto zoom in2While zoomed in, press . Four arrows appear on the monitor.x2LINKBefore you can return to normal viewing mode, you must press to disable the on-screen arrows. 4LINKPress and holdto zoom outx1ENGLISH13Using Digital Zoom
1Press and hold to open the menuLINKTurning on the Night-Light2Press repeatedly until is shownLINK3LINKPress to turn the night-light on / off4Press to save changes and exit menu.OFFPlaying LullabiesThe camera can play 5 different pre-loaded songs.1Press to play the first lullabyLINK2LINKPress to select a different lullabyON14
Press and hold to open the menuPress repeatedly until is shownPress to turn the night-light on / offPress to save changes and exit menu.Press to play the first lullabyPress to select a different lullaby3Press to stop playing lullabiesLINK3Press to adjust the low temperature. If the temperature at the selected camera goes below this temperature, the monitor will beep and the temperature reading on the monitor will flash orange.If you select a temperature below 62°F / 17°C, the low temperature alert will be turned OFF.The temperature alert feature allows you to ensure the baby’s room is at a comfortable, safe temperature. The monitor beeps if the temperature gets too hot or cold. Temperature sensor is accurate within 3°F/1°C.You can control the high and low temperatures that trigger alerts or disable temperature alerts. Temperature AlertsTo setup temperature alerts:1Press and hold to open the menuLINK2Press repeatedly until Lo is shownLINKLo 68° FIf a lullaby is playing, it will stop when the talk feature is used.ENGLISH15
5Press to adjust the high temperature. If the temperature at the selected camera goes above this temperature, the monitor will beep and the temperature reading on the monitor will flash orange.If you select a temperature above 86°F / 30°C, the high temperature alert will be turned OFF.4Press repeatedly until Hi is shownLINKHi 82° F6Press to save changes and exit menu.3Press to select °F (Fahrenheit) or °C (Celsius)4Press to save changes and exit menu.Selecting Fahrenheit or CelsiusYou can select if you would like temperature readings and alerts to be in Fahrenheit or Celsius.1Press and hold to open the menuLINK2Press repeatedly until is shownLINK ° F16
Press repeatedly until Hi is shownPress to save changes and exit menu.Press and hold to open the menuPress repeatedly until is shown1Press and hold to open the menuLINK2Press repeatedly until is shownLINK3LINKPress to set VOX sensitivityVOX OFFVOX VOX mode is offVOX mode is onLow sensitivityMedium SensitivityHigh SensitivityIf you want softer noises to trigger the monitor (such as a faint whimper), set the sensitivity setting higher. If you only want louder noises to trigger the monitor (such as a loud cry), set the sensitivity setting lower.4Press to exit menu.While VOX is activated, the monitor’s screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. Press any button to turn the screen back on. When VOX is on, a VOX icon is shown on the screen.VOX mode will not work while Scan mode is activated.ENGLISH17In VOX mode, the monitor’s screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. This conserves battery power, and alerts you only when needed.Enabling VOX Mode (Voice Trigger)
The monitor’s video display is turned off. The monitor plays sound from the selected channel only.Video Off Mode (Audio Only Mode)Press any button to turn the video display back on.• If Scan mode is enabled, the monitor will play sound from the channel that is currently selected.• VOX mode will override Video Off mode. See “Enabling VOX Mode (Voice Trigger)” on page 17 for details.Notes21Press to enter Video Off modeLINK18
Press to enter Video Off mode21Place the camera and monitor next to each other. Make sure the camera is turned on.Press and hold until is shown on the monitor.LINKC1 3LINKPress to to select the channel you would like to pair the camera toC2If a camera is already connected to this channel, the new camera will replace the existing camera.4Press to confirm the pairing channel. The Link LED will begin flashingLINKTo pair a camera with the monitor:ENGLISH19Pairing Additional CamerasThe camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# LB2251AC1), OR if your monitor and camera are not paired up, follow the steps below.
5Press the PAIR button on the back of the camera.PAIR PAIR button• Immediately move the camera away from the monitor to avoid speaker feedback.• The monitor can connect up to 4 cameras.NotesVideo from the camera is immediately shown on the monitor once the camera is successfully paired.If your monitor reads “Out of Range“, then pairing was not successful. Complete the pairing process again.203.4in 87mm
DC 6VLINKENGLISH21Technical SpecificationsCameraFrequency 2.4GHzMaximum Range Up to 450ft / 138m outdoors*Up to 150ft / 46m indoors*Image Sensor 1/5” Color CMOSLens 3.0mm F2.5IR LED 6 pcsPower Adapter 6.0V DC 800mABattery Supports 4x AAA Batteries (not included)Battery Life Up to 4 hours on AAA batteriesWeight 0.3lbs / 0.1kgMonitorFrequency 2.4GHzDisplay 4.3” TFT Color LCDPower Adapter 6.0V DC 800mABattery Li-ion Rechargeable Battery 3.7V DC 1700mAhBattery Life Up to 6 hours in normal modeUp to 10 hours in Video OffWeight 0.5lbs / 0.2kg*Based on unobstructed line of sight. Actual range will vary based on surroundings.3.4in 87mm5.8in 148mm 1.0in 25mm3.4in 87mm5.3in 135mm3.8in 97mmDC 6V
22TroubleshootingProblem SolutionNo video displayed on the monitor • Press and hold the button to power on the monitor.• Monitor is out of batteries. Plug in the monitor power adapter.• Video Off or VOX mode is on. Press any button to turn the screen back on. Monitor screen keeps turning off • VOX mode is on. See “Enabling VOX Mode (Voice Trigger)” on page 17 for details on disabling VOX mode.• The monitor battery is low. Plug in the monitor power adapter.The camera is not detected; “Out of Range” is shown on the monitor• Wrong channel selected. Press repeatedly to select the channel.• Make sure the camera is powered on.• Camera may be out of batteries. Replace the batteries or plug in the camera power adapter.• The camera and monitor may be out of range. Extend the antennas on the monitor and camera or move the monitor and camera closer together.• You may need to pair the camera and the monitor again. See “Pairing Additional Cameras” on page 19 for details.Feedback / squealing noise coming from the monitor• Your camera and monitor may be too close to each other. Move them further apart.• For optimal performance, avoid placing the monitor and camera near televisions, computers, cordless/mobile phones, or other electrical equipment.• Press to lower the monitor volume.Product Support is available 24/7 including product information, user guides, quick start guides, and FAQ’s at www.lorexbaby.com/supportNeed Help?
23CLEANINGClean the monitor and camera with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents.• Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth.• Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.• Every effort has been made to ensure high standards of reliability for your baby monitor. However, if something does go wrong, please do not try to repair it yourself. Contact Customer Service for assistance.DISPOSAL OF THE DEVICEAt the end of the product life cycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide, and/or box indicates this.Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.NOTICESWARNING: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.FCC NOTICEThis device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. However, it is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury.CAUTION: To maintain compliance with the FCCʼs RF exposureguidelines, place the camera at least 20cm (7.87in) from nearbypersons.For monitor, our device has been tested and it confirms to the SARlimit value. This device was tested for typical body-worn operations kept 0 cm from the body. CANADA/IC NOTICEThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. 

Navigation menu