SOUNDMAX ELECTRONICS DP6290 Car Radio User Manual 2
Soundmax Electronics Limited Car Radio 2
User Manual
Overview of the unit Listen to Digital Audio Broadcasts (DAB) Adjust Microphone Position Encoder Volume Knob Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. For better sound quality in make/receive phone call through Bluetooth, 1. Press and hold access into the Setup Menu, and then place the microphone near the mouth. press repeatedly to select the item to be adjusted Main Display DP-6290DAB For the first time when DAB mode is switched on. Press DP-6290DAB USB terminal General operation Select the available Source. if the,power is turned on. Short press to mute or restore volume. Turn the unit on. Press and hold again to turn the unit off. Confirm selection. Rotate it to increase or decrease the volume. Rotate it to select items. clip it on the sun-shield Tuner Mode: Select the FM bands (FM1/FM2/FM3) or AM1/AM2. Press and hold to access into Auto Store mode, the six strongest stations of the selected band will be saved in preset channel automatically: FM1, FM2, FM3(1-6), AM1, AM2. Media Playback Mode: Press to access into search Folder/File music mode. DAB Mode: Press repeatedly to select a band: DAB1,DAB2 or DAB3. Press and hold to starts searching for on-air DAB radio stations. repeatedly until [ SCAN 3. Press , the product starts scanning for on-air DAB radio ] is displayed. the detected stations are saved in the flash memory. Use Bluetooth Device Antenna Power Supply 12V On/Off 2. Press [12V OFF]: Enable Antenna power supply (12V). Returns to the previous item. BT Handfree Mode: To reject/end a call. 0700 BT Handfree Mode: During a telephone conversation, press and hold to transfer the call back to the Hand phone for privacy. Preset Numeric Buttons Tuner Mode: Press the Numeric buttons to recall the preset stations. Press and hold the Numberic buttons to store the listening station. Media Playback: Press the Numeric buttons to perform the below operation: DAB Mode: Press the Numberic buttons to store the listening station. 1. Press and hold 2. Press access into the Setup Menu. repeatedly until [PRUNE ] is displayed. To remove invalid stations from the listof scanned stations, press Intro Play/Pause Playing a USB device Repeat Folder Down Folder Up To exit the system menu, press Bend the appropriate tabs to hold the sleeve firmly in place. DP-6290DAB 18 53 mm Dashboard Control Panel Trim Plate USB Smart Phone 1A charging Sleeve to select USB mode, the unit starts playing from Remove the unit Trim plate Sleeve Frequency Range FM 87.5MHz to 108.0MHz AM FM Tuner Usable Sensitivity (S/N=20dB) 522kHz to 1620kHz 0.8uV AM Tuner Sensitivity/Selectivity (S/N=20dB) 30 uV -100dBm(Band III) Selectivity 40dB Supports Audio Format (OPTIONAL) Steering wheel remote(SWC) SWC adaptor (not include) OE SWC IR Remote In (Purple) Note: You can operate this unit using the Steering Wheel remote controller ( SWC ). For details & compatible SWC adaptor or black box, please consult the same car audio dealer as where this unit is purchased. Ground (Black) ANTEENA SOCKET DAB SOCKET MIC 5 7 6 8 FUSE SUB-W FRONT Audio Format 60000 Play Back Folder 255 FLAC/WAV/MP3/WMA Folder 60000 USB Device USB USB1.1 Full speed USB Port Type A USB Voltage 5.0V Maximum USB Memory Size 32G USB Flash Drive and Hard FAT16/FAT32 Bluetooth External Microphone ISO Connector (OPTIONAL) Aux input jack ISO Connector Wiring Chart Pin Color and function A4 Yellow Battery(+) Color and function Pin B1/B2 Violet Right rear speaker Violet/Black A5 Blue Right front speaker www.grundigcarradio.com Grey/Black A7 Red Connect to system control terminal of the power AMP or auto antenna relaycontrol terminal (Max 150MA12VDC) Ignition(ACC) A8 Black Ground Size: 525x296mm (After Folding size: 105x148mm Color: 4 color printing Paper: 105g粉纸 Printing: Double side printed 188 x 58 x 137.8mm Sensitivity Antenna Jack 2. Turn on the external component and start playing. Dimension (WxHxD) 20W x 4RMS (4Ω10%T.H.D) 2.0V ≥500mV -20~+60 Disassembly DP-6290DAB to select AUX mode. 4x40W 174 - 240MHz Listening to external Aux input 1. Press Maximum power output Continous power output Pre-AMP output voltage Aux-In level Operating Temperature Frequency Range REAR 3.5 mm Cable (not included) 12V DC (11V to 16V), negative ground 15A 4-8Ω 1. Slide the USB socket cover to right. 2. Insert the iPhone/Smart Phone device into the USB socket. 3. Once he iPhone/Smart Phone is connected and recognized, the iPhone/Smart Phone begins to charge. This USB only can charge Phones, but cannot play or decode music files stores inside the Smart Phones. Power Supply Fuse Suitable speaker impedance DAB Tuner Wiring Connection B3/B4 Grey B5/B6 White + White/Black B7/B8 Green + Green/Black Left front speaker Left rear speaker button to exit. 1. If there is an incoming call, the phone number will be displayed. If the incoming call has no phone number, [PHONE IN] will be displayed. 2. Press to answer / accept the call. 3. When conversation ends, press to terminate the call. Call Transfer You can transfer voice from car speakers to mobile phones during a telephone conversation. During a telephone conversation, press and hold voice transfers from car speakers to mobile phone. Selectable setting Adjust the Hours and Minutes Select the time format 12H or 24H Turn On or Off this beep sound Adjust the LCD display backlight level between Hight or Low Reset Restore the factory default settings. Tuner Mode Selectable setting RDS On/Off Turn On or Off the RDS function. PTY (Program Type) AF (Alternate Frequencies) Once inside the PTY mode, press the get into program type item, and rotat encoder volume knob to selected category. Available Program Type: POP M; ROCK M; EASY M; LIGHT M; CLASSICS; OTHER M; JAZZ M; COUNTRY; NATION M; OLDIES M; FOLK M; A-TEST; ALARM; NEWS; AFFAIRS; INFO; SPORT; EDUCATE; DRAMA; CULTURE; SCIENCE; VARIED; WEATHER; FINANCE; CHILDREN; SOCIAL; RELIGION; PHONE IN; TRAVEL; LEISURE; DOCUMENT ON: The unit will search for another station with stronger signal, but with the same program identification as the current station automatically. OFF: Turn off AF function ON: When there is traffic announcement,unit will automatically switch to the tuner mode (regardless TA of the current mode) and begins to broadcast the (Traffic announcemet on traffic conditions. When the traffic announcement is over, unit will automatically Announcement) return to the previous mode. OFF: Traffic announcement does not cut in. ON: Turn on the RDS clock. Time shown on the unit CT will synchronizes with the clock time of the RDS station. (Clock Time) OFF: Turn off the RDS clock. ON: only stations with strong signal can be broadcast. The Local indicator will light up. Local OFF: Stations of both strong and weak signals can be broadcast. Select suitable country area for this unit: Area EUROPE; ASIA; MID-EAST; AUSTRIA; USA; LATIN; BT Mode Selectable setting This feature allows to Re-connect or Dis-connect to the RE-CON paired mobile phone or Bluetooth device by manually. /DIS-CON Remote Control Operation(Optional) FCC STATEMENT Radio Tuner Disassembly DP-6290DAB You can dial number through the mobile phone. 1. Use the Mobile Phone to dial and make an outgoing call 2. Once completed the dialing, the phone number and [CALLING] is displayed. General Screw the USB device. 2m 1. Slide the USB socket cover to right. 2. Insert the USB device into the USB socket. Product Specifications Installing the unit Making a call Receiving a Call Erase the DAB station list to select a value/option. Dimmer access into the Setup Menu. [12V ON]: Disable Antenna power supply (12V). Press and hold to switch between Clock and Source Name. Tuner Mode: Press to view RDS received information. Media Playback: Press to view ID3 informations. DAB Mode: Press repeatedly to display available information that is transmitted by a DAB radio station. Pairing the Bluetooth device On your Bluetooth-enabled device, follow the steps below. 1. Search for Bluetooth devices. 2. In the device list, select DP6290. repeatedly until [12V ON] or [12V OFF] is displayed. 3. Enter the default password "0000", and then confirm the password entry. If the pairing is successful, the device name will be to select an option, and then press to displayed on the LCD screen of this system. 1. Press and hold 3. Rotate confirm. Press repeatedly to select a preset sound equalizer. Press to access into the Audio Menu mode to adjust the below options: FLAT->POP->USER->TECHNO->ROCK->CLASSIC->JAZZ->VOCAL Press and hold to access into the System Menu. Beep Tone access into the Setup Menu. 2. Press stations, Tuner Mode: Press to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. Media Playback Mode: Press to track Up/Down, press and hold for fast forward/backward. BT Audio Mode: Press to track Up/Down. DAB Mode: Press to tune to a detected station. Front Clock Set Clock Format 1. Press and hold BT ID: B018387 3. Press the System Mode Scan for on-air stations Main Unit 2. Rotate When you press or hold the following button(s)... Tape When you press or hold the following button(s)... NOTE 2. Place the microphone at a proper location, for example: Stick it onto the dashboard Aux-In jack DIGITAL RADIO TUNER DAB/DAB+ 3. Press 1. Make sure the supplied microphone is connected to the car audio system. The system performs auto scan. All the available DAB stations are stored. The radio tunes to the first available station DP-6290DAB Power/Mute on the main unit repeatedly to select DAB/DAB+. Adjust Setup Menu Settings Output Power Class 2 Frequency Band 2.4000 Ghz - 2.4835GHz ISM Band Range 3 meters (free space) Standard Bluetooth 2.1 specification Compatible Bluetooth Profiles Hands-Free Profiles (HFP) A2DP(Advanced Audio Distribution Profile) AVRCP1.3(Audio/Video Remote Control Profile) SRC AUDIO Press to mute or restore volume. Press increas the volume. Press decreas the volume. Tuner Mode: Press to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. Media Playback Mode: Press to track Up/Down, press and hold for fast forward /backward. SRC Select the available Source. AUDIO Press to access into the Audio Menu mode. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency nergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2017:03:23 11:23:38+08:00 Modify Date : 2017:03:23 11:23:38+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Administrator Creator : CorelDRAW X6 Title : 未命名 -2EXIF Metadata provided by EXIF.tools