Sanyo Electric Co SCP-55H Tri-Mode dual-Band Analog/ PCS Phone (AmPS/CDMA) User Manual
Sanyo Electric Co Ltd Tri-Mode dual-Band Analog/ PCS Phone (AmPS/CDMA) Users Manual
Contents
- 1. Users Manual
- 2. Users Manual per CRN 10231
- 3. Users Manual per CRN 10566
Users Manual
SCP-5500
Operating Guide
(Draft)
Dual-Band /Tri-Mode
1
Table of Contents
Table of ContentsTable of Contents
Table of Contents
Getting to Know your Phone
Getting to Know your PhoneGetting to Know your Phone
Getting to Know your Phone…
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
….
..
.6
66
6
Front View of Phone................................................................................................6
Viewing the Display Screen...................................................................................8
Turning your Phone On and Off ................................................... .......................9
Unlocking the Phone...............................................................................................9
Using the Battery ....................................................................................................10
Displaying your Phone Number ...........................................................................11
Making and Answering Calls
Making and Answering Calls Making and Answering Calls
Making and Answering Calls ................................
................................................................
...................................................
......................................
................... 1
11
12
22
2
Making Calls ............................................................................................................12
Answering Calls.......................................................................................................12
Using the Speakerphone ........................................................................................13
Changing Ringer Volume.......................................................................................13
Adjusting Volume During a Conversation..........................................................13
Muting a Call............................................................................................................13
Missed Call Notification .........................................................................................14
Calling Emergency Numbers ................................................................................14
Dialing Options ........................................................................................................14
In-Call Options.........................................................................................................15
End-of-Call Options.................................................................................................16
Saving a Phone Number.........................................................................................16
Finding a Phone Number.......................................................................................17
Dialing and Saving Phone Numbers With Pauses............................................17
Four-Digit Dialing ...................................................................................................18
Dialing From the Internal Phone Book...............................................................18
Using One-Touch Speed Dialing...........................................................................18
Controlling Your Phone
Controlling Your PhoneControlling Your Phone
Controlling Your Phone’
’’’s Settings
s Settingss Settings
s Settings ................................
................................................................
........................................................
................................................
........................ 19
1919
19
Sound Settings .........................................................................................................19
Ringer Types.............................................................................................................19
Selecting Ringer Types for Voice Calls…………………………………………..19
Selecting Ringer Types for Voicemail …..…….……………………....…..……..19
Selecting Ringer Types for Messages ...................................................................20
Setting Tone Length, Start-up/Power-off Tone or Voice Prompt .....................20
Adjusting the Phone’s Volume Settings...............................................................20
Alert Notification .....................................................................................................21
2
Silence All..................................................................................................................22
Display Settings ………………………………………...…………………………22
Changing the Greeting… .......................................................................................22
Changing the Backlight Time Length .................................................................23
Changing the Display Screen................................................................................23
Setting the Display for Incoming Calls................................................................24
Setting the Display for the Standby Mode..........................................................24
Changing the Screen Saver ...................................................................................25
Changing the Display for My Buddy ...................................................................25
Changing the Display Color...................................................................................25
Changing the Font Size ..........................................................................................26
Location Settings………………………………………………………………..…26
Setting Airplane Mode............................................................................................27
Setting TTY Mode....................................................................................................27
Phone Setup Options…………………………………...…………………………27
My Shortcut ..............................................................................................................27
Auto Answer Mode ..................................................................................................28
Setting Flip Options ................................................................................................28
Setting Any Key Answer.........................................................................................28
Setting Abbreviated Dialing ..................................................................................29
Headset Mode...........................................................................................................29
Setting Side Key Guard..........................................................................................29
Sleep Mode................................................................................................................30
Setting Message Notification.................................................................................30
Changing the Menu Language .............................................................................30
Setting Your Phone’s Security
Setting Your Phone’s SecuritySetting Your Phone’s Security
Setting Your Phone’s Security................................
................................................................
....................................................
........................................
.................... 31
3131
31
Accessing the Security Menu.................................................................................31
Locking Your Phone.................................................................................................31
Unlocking Your Phone ............................................................................................31
Changing the Lock Code ........................................................................................31
Calling in Lock Mode ..............................................................................................32
Restricting Calls.......................................................................................................32
Using Special Numbers..........................................................................................32
Erasing the Internal Phone Book.........................................................................33
Erasing the Downloads...........................................................................................33
Resetting Your Phone..............................................................................................33
Resetting and Locking Your Phone through SMS .............................................34
3
Controlling Your
Controlling Your Controlling Your
Controlling Your Roaming
Roaming Roaming
Roaming Experience
ExperienceExperience
Experience ................................
................................................................
......................................
............
...... 35
3535
35
Understanding Roaming........................................................................................35
Setting Your Phone’s Roam Mode ........................................................................36
Controlling Roaming Charges Using Call Guard..............................................36
Navigating Through Menus
Navigating Through MenusNavigating Through Menus
Navigating Through Menus................................
................................................................
........................................................
................................................
........................ 38
3838
38
Menu Navigation.....................................................................................................38
Menu Structure........................................................................................................38
Viewing the Menus..................................................................................................39
Managing Call History
Managing Call HistoryManaging Call History
Managing Call History................................
................................................................
................................................................
................................................................
................................ 41
4141
41
Viewing Call History...............................................................................................41
Call History Options ...............................................................................................41
Making a Call From Call History .........................................................................41
Saving a Phone Number From Call History .....................................................42
Prepending a Phone Number From Call History..............................................43
Erasing Call History ...............................................................................................43
Using your Internal Phone Book
Using your Internal Phone BookUsing your Internal Phone Book
Using your Internal Phone Book................................
................................................................
................................................
................................
................ 44
4444
44
Internal Phone Book Entry Options ....................................................................44
Selecting a Character Input Mode........................................................................45
Entering Characters Using T9 Text Input .........................................................45
Adding a Word to the T9 Database ......................................................................45
Entering Characters by Tapping the Keypad ....................................................46
Using Smart Punctuation ......................................................................................47
Entering Numbers, Symbols, Canned Suffix and Smileys ..............................47
Adding a New Internal Phone Book Entry.........................................................48
Finding Internal Phone Book Entries .................................................................49
Adding a Phone Number or Address to an Internal Phone Book Entry…....50
Editing an Internal Phone Book Entry ...............................................................51
Selecting a Ringer/Image Type for an Entry ......................................................52
Secret Internal Phone Book Entries ....................................................................52
Dialing PCS Services ..............................................................................................53
Storing Special Numbers in the Phone Book .....................................................53
Using Different Dialing Methods..........................................................................54
My PCS Phone Number .........................................................................................55
4
Personal Organizer
Personal OrganizerPersonal Organizer
Personal Organizer................................
................................................................
................................................................
................................................................
......................................
............
...... 56
5656
56
Managing Schedules...............................................................................................56
Adding an Event to the Scheduler........................................................................56
Event Alerts..............................................................................................................57
Event Alert Menu ....................................................................................................58
Editing an Event......................................................................................................58
Adding a Call Alarm to the Scheduler .................................................................58
Call Alarm Alerts .....................................................................................................59
Call Alarm Menu .....................................................................................................59
Editing Call Alarms.................................................................................................59
Erasing a Day’s Events or Call Alarms................................................................60
Going to Today’s Scheduler Menu.........................................................................60
Adding To Do Items.................................................................................................60
Viewing To Do List...................................................................................................61
Editing To Do Items.................................................................................................61
Adding To Do Item to Schedule.............................................................................61
Deleting Items from the To Do List ......................................................................61
Viewing Event, Call Alarm or To Do List ............................................................62
Purging All Events, Call Alarms or To Do List...................................................62
Displaying User Address........................................................................................62
Getting to know Icon Indication............................................................................63
Displaying the Version Information .....................................................................63
Using your Phone’s Tools………………………………………...………………..63
Using the Calculator ...............................................................................................63
Using World Clock...................................................................................................64
Using
Using Using
Using Your Phone
Your PhoneYour Phone
Your Phone’
’’’s
s s
s Voice Services
Voice ServicesVoice Services
Voice Services ................................
................................................................
............................................
........................
............ 65
6565
65
Using Voice-Activated Dialing..............................................................................65
Programming Voice Dial Tag to Your Phone......................................................65
Erasing All Voice Dialing Tags .............................................................................66
Recording Voice Memos .........................................................................................66
Voice Memo Options................................................................................................67
Erasing Voice Memos..............................................................................................67
Setting Up Screen Call ...........................................................................................68
Using Voicemail
Using VoicemailUsing Voicemail
Using Voicemail................................
................................................................
................................................................
................................................................
...........................................
......................
........... 70
7070
70
Setting Up Your Voicemail .....................................................................................70
Voicemail Notification.............................................................................................70
5
New Voicemail Message Alerts..............................................................................70
Retrieving Your Voicemail Messages....................................................................71
Voicemail Options ....................................................................................................71
Clearing the Message Icon.....................................................................................73
Using Caller ID........................................................................................................73
Responding to Call Waiting ...................................................................................73
Making a Three-Way Call ......................................................................................74
Using Call Forwarding ...........................................................................................74
Messages ...................................................................................................................75
New Messages..........................................................................................................75
Message Storage ......................................................................................................75
Displaying Messages...............................................................................................75
Changing the Displaying Font Size of a Message..............................................76
Message Options......................................................................................................76
Prepending a Phone Number From a Message .................................................76
Extracting Phone Numbers or E-mail/Web Address From a Message .................77
Creating Folders for Messages......................................................................... …78
Adding a Folder To the Message...................................................................... …79
Moving a Message Into the Other Folder.......................................................….79
Editing Folders....................................................................................................... .79
Erasing a Folder Including Messages................................................................ .80
Erasing All Messages.........................................................................................….80
Safety
Safety Safety
Safety ................................
................................................................
................................................................
................................................................
..........................................................
....................................................
.......................... 81
8181
81
Getting the Most Out of Your Reception .............................................................81
Maintaining Safe Use of and Access to Your Phone .........................................82
Caring for the Battery.............................................................................................84
Acknowledging Special Precautions and the FCC Notice................................85
![](/img.php?id=366831&img=bg7.png)
Nov 10, 03 (Mon)
10:30am
R-Link Web
10:30a Nov 10
25. Softkey
(right)
4. Camera
Lens
5.
Side Call
Key
13. Softkey
(left)
17. TALK
14.
Navigation
Key
15.
MENU/OK
16. Camera
Key
12. Main LCD
19. Accessories
Connector
21. Keypad
20. Battery
Charger Jack
2. Speaker
3. Antenna
1. Sub LCD
6.
Side
Camera
Key
18.
Microphone
11. Earpiece
23. END/POWER
10.
LED/Flash
9.
Ready Link
Key
7. Headset
Jack
8. Side
Volume
Key
24. BACK
22. SPEAKER
Key
Getting to Know your Phone
Front View of Phone
6
![](/img.php?id=366831&img=bg8.png)
7
1. Sub LCD:
Sub LCD: Sub LCD:
Sub LCD: Lets you monitor the phone’s status and see who’s calling without opening the
phone.
2.
2.2.
2.
SPEAKER
SPEAKERSPEAKER
SPEAKER: Allows you hands-free conversation while in speakerphone mode. Lets you hear
the different ringers and sounds.
3.
3.3.
3.
Anten
AntenAnten
Antenna
nana
na: Fully extend the antenna for the best reception.
4.
4.4.
4.
Camera Lens:
Camera Lens: Camera Lens:
Camera Lens: This built-in camera lens lets you take.
5. Side Call key:
Side Call key:Side Call key:
Side Call key: Let you place or receive calls without opening the phone.
6. Side Camera Key:
Side Camera Key:Side Camera Key:
Side Camera Key: Press to display Camera Mode. Let you mute the ringer when receiving
incoming calls.
7. Headset Jack:
Headset Jack: Headset Jack:
Headset Jack: Insert the plug of the headset (sold separately) for hands-free phone use.
8. Side Volume keys:
Side Volume keys: Side Volume keys:
Side Volume keys: Let you adjust the receiver volume during a call, or ringer volume in
standby mode.
9. Ready Link key
Ready Link keyReady Link key
Ready Link key: Press to activate Ready Link mode.
10. LED/Flash
LED/FlashLED/Flash
LED/Flash: Shows your phone ’s connection status at a glance. You can take pictures
clearly with this flash about 1.5 ft distance.
11. Earpiece
EarpieceEarpiece
Earpiece: Lets you hear the caller’s voice.
12. Main
Main Main
Main LCD
LCDLCD
LCD (display)
(display) (display)
(display): Displays the phone’s main menu, features, modes, etc.
13. Soft
SoftSoft
Softkey (left)
key (left)key (left)
key (left): Lets you select the menu corresponding to the bottom left line on the Main
LCD.
14. Navigation Key
Navigation KeyNavigation Key
Navigation Key: Lets you navigate quickly and easily through the menu options. You can
access a menu shortcuts by pressing =Phone Book (Find Name),
=My Shortcut, ▲ = Messaging and ▼ =Downloads.
15. M
MM
MENU/OK
ENU/OKENU/OK
ENU/OK: Lets you access the phone’s menus and select menu options.
16. Camera Key
Camera KeyCamera Key
Camera Key: Accesses the Pictures menu.
17. TALK
TALKTALK
TALK: Lets you place or receive a call, answer Call Waiting or use Three-Way Calling and
Voice Dial.
18. Microphone
MicrophoneMicrophone
Microphone: To speak into or record your voice.
..
.
19. Accessories Connector:
Accessories Connector: Accessories Connector:
Accessories Connector: Connect accessories, such as Travel Charger (included), Desktop
Charger, or PCS Connection Kit (sold separately).
20. Battery Charger Jack:
Battery Charger Jack: Battery Charger Jack:
Battery Charger Jack: To Charge your phone’s battery.
21. Keypad
KeypadKeypad
Keypad: Lets you enter numbers, letters and characters, and navigate within Menus. Press
and hold 2-9 key to make a Speed Dial call.
22. Speaker Key
Speaker KeySpeaker Key
Speaker Key: Lets you place or receive calls in speakerphone mode. You can also use it to
activate Voice Dial and Memo recording.
23. END/P
END/PEND/P
END/POWER
OWEROWER
OWER: Lets you turn the phone On/Off, end a call, or return to standby mode.
24. BACK
BACKBACK
BACK:
: :
: Lets you to clear characters from the screen Time/Date while the phone is in use.
25. Soft
SoftSoft
Softk
kk
key (right)
ey (right)ey (right)
ey (right): Lets you select the menu corresponding to the bottom right line on the Main
LCD.
![](/img.php?id=366831&img=bg9.png)
8
Viewing the Display Screen
Viewing the Display ScreenViewing the Display Screen
Viewing the Display Screen
This list identifies some of the more common symbols you’ll see on your display screen.
shows your current signal strength. The more lines you have, the stronger your
signal.
means your phone cannot find a signal.
tells you a call is in progress.
indicates the Vision services is dormant.
indicates the Vision services is active.
indicates the Vision services is disabled.
indicates you have text messages waiting.
indicates you have voicemail messages waiting. Press and hold 1 to call your
voicemail box.
indicates you have text messages and voicemail messages waiting.
indicates the phone is on another service provider’s network (Main LCD only).
shows the level of your battery charge. The more black you see, the more power
you have left. It turns while charging.
indicates you have menus to scroll (Main LCD only).
indicates the vibrate feature is set to ON.
indicates volume level 4 and vibrate feature is set to ON.
indicates the Location Service of your phone is enabled.
indicates the Location Service of your phone is disabled.
indicates you have new caller’s message.
indicates the Screen Call Auto setting is ON.
indicates you have new downloaded data.
indicates the speakerphone mode is set to ON
indicates Headset mode is Ready Link Call and Headset is connected.
indicates Ready Link Call is available.
indicates Ready Link Call is unavailable.
indicates TTY mode is set to ON when you connect TTY devices.
![](/img.php?id=366831&img=bga.png)
9
Softkeys
SoftkeysSoftkeys
Softkeys
You can select the menus, which are described at the bottom line of the display by pressing the
corresponding softkeys (left/right). In this User Manual, the explanation for selecting such
menus are as shown below:
Press Memo (right softkey).
(Press the right softkey corresponding to Memo).
Turning your Ph
Turning your PhTurning your Ph
Turning your Phone O
one Oone O
one On
nn
n and O
and O and O
and Off
ffff
ff
Turning your Phone On:
Turning your Phone On:Turning your Phone On:
Turning your Phone On:
To turn your phone on, press END/.
Once your phone is On, it displays “Looking for service...”, indicating that your phone is
searching for a signal. When your phone finds a signal, it automatically enters standby mode –
the phone’s idle state. At this point, you are ready to begin making and receiving calls. If your
phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your phone automatically returns to standby
mode.
In power save mode, your phone searches for a signal periodically without your intervention.
You can also initiate a search for PCS Service by pressing any key (when your phone is turned
On).
Tip:
Tip: Tip:
Tip: The Power Save feature helps to conserve your battery power when you are in an area
where there is no signal.
Turning your Phone Off:
Turning your Phone Off:Turning your Phone Off:
Turning your Phone Off:
Press and hold END/ for two seconds until you see the powering down animation on the display
screen.
Your screen remains blank while your phone is off (unless the battery is charging).
Unlocking the Phone
Unlocking the PhoneUnlocking the Phone
Unlocking the Phone
1. Press END/ to turn the phone on.
2. Press Unlock (left softkey).
3. Enter your four-digit lock code. For security purposes, the code is not visible as you
type.
![](/img.php?id=366831&img=bgb.png)
10
Using the Bat
Using the BatUsing the Bat
Using the Battery
terytery
tery
Installing
InstallingInstalling
Installing the Battery
the Battery the Battery
the Battery
Your PCS Phone comes with a Lithium Ion battery. Follow these steps to install it:
1. Place the battery into the space beneath the antenna with the metal contacts at the bottom,
facing downward.
2. Gently press down until it’s in place and the battery release latch snaps.
Removing
Removing Removing
Removing the
thethe
the Battery
Battery Battery
Battery
To remove your battery for charging or for other reason, follow these easy steps:
1. Make sure the power is off so that you don’t lose any stored numbers or messages.
2. Press up the battery release latch and hold the battery.
3. Then pull it up and out at a 45-degree angle.
Charging the Battery
Charging the BatteryCharging the Battery
Charging the Battery
Your PCS Phone comes with a rechargeable battery. You should charge the battery as soon as
possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level becomes too low, your
phone automatically turns off and you’ll lose all the information you were just working on. For a
quick check of your phone’s battery level, glance at the battery charge indicator located in the
upper-right corner of your phone’s display screen. If the battery charge gets too low, the battery
icon appears and the phone sounds a warning tone.
Always use a recommended Desktop Charger, Travel Charger or Vehicle Power Adapter to
charge your battery.
Warning!
Warning! Warning!
Warning! Using the wrong battery charger could cause damage to your phone and void the
warranty.
Using the
Using the Using the
Using the Travel
TravelTravel
Travel Charger
Charger Charger
Charger
To use the travel charger provided with your phone:
1. Plug the travel charger into a wall outlet.
2. Plug the other end into the travel charger into the bottom of your phone (with the battery
installed).
Charging when your phone is turned on:
The battery icon appears on the display while charging.
The battery icon turns to when charging is complete.
Charging when your phone is turned off:
The battery icon appears, and the message “BATTERY CHARGING-Power Off-” is
shown on the display while charging. When the battery is completely discharged, you may
![](/img.php?id=366831&img=bgc.png)
11
wait for several minutes until the message is shown on the display. The battery icon turns
to
, and message changes to “CHARGING COMPLETE-Power Off-” when charging is
complete.
Displaying your Phone Number
Displaying your Phone NumberDisplaying your Phone Number
Displaying your Phone Number
To display your phone number:
1. Press MENU/OK to display the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Phone Info
Phone InfoPhone Info
Phone Info and press MENU/OK.
4. Select Phone
PhonePhone
Phone#
##
# UserID
UserID UserID
UserID and press MENU/OK.
Note:
Note: Note:
Note: To access the phone’s main menu, press MENU/OK from standby mode. Menu
items may be selected by highlighting them with the Navigation key and pressing
MENU/OK, or you can press the number corresponding to the menu item on your keypad.
![](/img.php?id=366831&img=bgd.png)
12
Making
Making Making
Making and Answering
and Answering and Answering
and Answering Calls
CallsCalls
Calls
Making Calls
Making CallsMaking Calls
Making Calls
1. Make sure your phone is On.
2. Enter a phone number. (If you make a mistake while dialing, press Back to erase one digit
at a time. Press and hold Back to erase the entire number).
3. Press TALK or SPEAKER (To make a call when you are roaming and Call Guard is
enabled, press MENU/OK, highlight Roam Call
Roam CallRoam Call
Roam Call
or Roam:
Roam:Roam:
Roam:Speaker
SpeakerSpeaker
Speaker and press MENU/OK ).
4. When you’re finished, press END/.
Tip:
Tip: Tip:
Tip: To redial your last outgoing call, press TALK or SPEAKER twice.
Answering Calls
Answering CallsAnswering Calls
Answering Calls
1. Make sure your phone is on. If your phone is off, incoming calls go to voicemail.
2. When your phone rings, press TALK or SPEAKER.
Depending on your settings, your PCS Phone notifies you of incoming calls in the following
ways:
The phone rings and/or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Internal Phone Book, the Phone Book entry’s name is
displayed.
The picture is displayed when you have set the downloaded picture to “Incoming Calls”.
The following options are also displayed by pressing MENU/OK. To select an option, highlight
it and press MENU/OK.
Call Guard
Call GuardCall Guard
Call Guard to answer the call when you are in roaming (This feature appears when you
are in digital area and analog service area). See “Call Guard” on pages 36-37.
Answer
Answer Answer
Answer to answer the call.
Answer:Speaker
Answer:Speaker Answer:Speaker
Answer:Speaker to answer the call in speakerphone mode.
Screen Call
Screen Call Screen Call
Screen Call to answer the call by using pre-recorded announcement. (This feature appears
when you are in Service area or digital roaming area). See pages 68-69 for setting up.
Quie
QuieQuie
Quiet Ringer
t Ringer t Ringer
t Ringer to mute the ringer. (This feature appears when the ringer is set).
To answer a call when you are roaming and Call Guard is enabled, you must press MENU/OK,
highlight Answer
AnswerAnswer
Answer or Answer:Speaker
Answer:SpeakerAnswer:Speaker
Answer:Speaker and press MENU/OK to answer the call. See “Call
Guard” on pages 36-37.
Note:
Note: Note:
Note: If your phone is off. Incoming calls go to voicemail.
3. To disconnect the call, press END/ .
![](/img.php?id=366831&img=bge.png)
13
Using the Speakerphone
Using the SpeakerphoneUsing the Speakerphone
Using the Speakerphone
The speakerphone feature lets you hear audio through the speaker and talk without holding
the phone. When the speakerphone is activated, use the Side Volume key to adjust the volume.
To activate the speakerphone during a call:
Press SPEAKER.
-or-
Press Menu, highlight Speaker On
Speaker OnSpeaker On
Speaker On and press OK.
To turn the speakerphone off:
Press SPEAKER.
-or-
Press Menu, highlight Speaker Of
Speaker OfSpeaker Of
Speaker Off
ff
f and press OK.
Changing Ringer Volume
Changing Ringer VolumeChanging Ringer Volume
Changing Ringer Volume
To change the ringer volume, adjust the Side Volume key when the clamshell is open in
standby mode.
Note:
Note: Note:
Note: To change the ringer volume from the main menu, see “Adjusting the Phone’s Volume
Settings” on page 20.
Adju
AdjuAdju
Adjusting Volume During a Conversation
sting Volume During a Conversationsting Volume During a Conversation
sting Volume During a Conversation
Whether you need to hear more or less of a conversation, adjust the Side Volume key, or press
▲/▼ on the Navigation key during a call.
Muting a Call
Muting a CallMuting a Call
Muting a Call
There are times when it’s necessary to mute a call so that your caller does not hear you or
certain background noise.
To use this function during a call:
1. Press MENU/OK to display the options.
2. Highlight Mute
Mute Mute
Mute and press MENU/OK.
When the phone is muted, “Mute
“Mute“Mute
“Mute”
””
” appears on the display.
To unmute a call:
1. Press MENU/OK to display the options.
2. Highlight Unmute
Unmute Unmute
Unmute and press MENU/OK.
![](/img.php?id=366831&img=bgf.png)
14
Missed Call Notification
Missed Call NotificationMissed Call Notification
Missed Call Notification
When an incoming call is not answered, the Missed Call log is displayed on your screen.
To display the list of Missed Calls :
Press View (left softkey).
If the phone is locked, you need to press Unlock (left softkey), then enter the lock code and press
View (left softkey).
To dial the last Missed Call Number:
Highlight the entry and press TALK or SPEAKER .
Calling Emergency Numbers
Calling Emergency NumbersCalling Emergency Numbers
Calling Emergency Numbers
You can place calls to 911 (dial 9 1 1 and press TALK or SPEAKER), even if your phone is
locked or your account is restricted. Once the dial is made, you will enter Emergency mode.
The phone tries to dial to 911 automatically until the dial will be connected.
While you are in the Emergency mode, all phone calls can be received.
To exit from the Emergency mode, follow these instructions:
1. Press END/.
2. Press MENU/OK to display the options.
3. Highlight Exit Emergency
Exit EmergencyExit Emergency
Exit Emergency and press MENU/OK.
Dialing Options
Dialing OptionsDialing Options
Dialing Options
Dialing options are displayed when you press MENU/OK after entering numbers in the
standby mode.
To select an option, highlight it and press MENU/OK.
Call
Call Call
Call to dial the phone number. (If you are roaming and have the Call Guard feature
activated, you need take extra step. See “Call Guard” on pages 36-37).
Call:Speaker On
Call:Speaker On Call:Speaker On
Call:Speaker On to dial the phone number in speakerphone mode.(If you are roaming and
have the Call Guard feature activated, You need take extra step. See the “Call Guard” on
pages 36-37.)
Ready Link
Ready LinkReady Link
Ready Link to make a Ready Link Call.
Save Phone#
Save Phone# Save Phone#
Save Phone# to save the phone number in your Internal Phone Book. (See “Saving a Phone
Number” on page 16).
Find
Find Find
Find to display Internal Phone Book entries that end with the digits you enter. (See
“Finding a Phone Number” on page 17).
H
HH
H
Hard Pause
Hard Pause Hard Pause
Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With
Pauses” on page 17).
T
TT
T
2
22
2-
--
-Second Pause
Second Pause Second Pause
Second Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers
With Pauses” on page 17).
Hyphen
Hyphen Hyphen
Hyphen to insert a hyphen manually where you like, however they are mainly for show.
![](/img.php?id=366831&img=bg10.png)
15
(See “Dialing and Saving Phone Numbers With Pauses” on page 17).
Tip
TipTip
Tip: To speed dial a pone number from the standby mode, press and hold appropriate speed
dial key locations 2-9. See page 18 for setting.
This option appears when you press after entering 4-digit and press MENU/OK.
Abbrev. Dial
Abbrev. Dial Abbrev. Dial
Abbrev. Dial to dial the phone number in your Internal Phone Book that ends with the four
digits you enter. (See “Four-Digit Dialing” on page 18).
This option appears when you enter four or more digits and press MENU/OK.
In
InIn
In-
--
-Call Options
Call OptionsCall Options
Call Options
During a call, your phone displays menu options by pressing MENU/OK.
To select an option, highlight it and press MENU/OK.
Flash
Flash Flash
Flash to answer an incoming Call Waiting call or connect a third party during Three-Way
Calling.
Mute
Mute Mute
Mute or Unmute
UnmuteUnmute
Unmute
Select Mute
Mute Mute
Mute to mute your phone’s microphone. Select Unmute
Unmute Unmute
Unmute to reactivate the
Microphone.
Speaker On
Speaker OnSpeaker On
Speaker On or Speaker Off
Speaker OffSpeaker Off
Speaker Off to route the phone’s audio through the speaker. You can adjust
the speakerphone volume using the Side Volume key.
Three
Three Three
Three -
--
-Way Call
Way Call Way Call
Way Call to call a third party.
Call History
Call History Call History
Call History to use like a main menu. (See “Managing Call History” on
pages 41-43).
Phone Book
Phone Book Phone Book
Phone Book to use like a main menu. (See “Using Your Internal Phone Book” on pages
45-55).
Voicemail
Voicemail Voicemail
Voicemail to use like a main menu. (See pages 70-80).
Settings
Settings Settings
Settings to use like a main menu. (See “Controlling Your Phone’s Settings” on pages 19-30.)
Tool/Extras
Tool/ExtrasTool/Extras
Tool/Extras
to use like a main menu. (See “Calendar” menu instructions on
pages 56-62).
Voice Services
Voice ServicesVoice Services
Voice Services to use like a main menu. (See pages 65-67).
Note:
Note:Note:
Note: Flash menu appears in Call Waiting and Three-Way Call. Mute menu does not appear
during a 911 call. Three-Way Call Menu does not appear in Roaming area.
![](/img.php?id=366831&img=bg11.png)
16
End
EndEnd
End-
--
-of
ofof
of-
--
-Call Options
Call OptionsCall Options
Call Options
After receiving a call from or making a call to a phone number that is not in your Internal
Phone Book, the phone number and the duration of the call is displayed. You can display the
following menu options by pressing MENU/OK within 10 seconds after disconnecting the call.
To select an option, highlight it and press MENU/OK.
Call Again
Call Again Call Again
Call Again to dial the phone number.
Call: Speaker On
Call: Speaker On Call: Speaker On
Call: Speaker On to dial the phone number in speakerphone mode.
Save Phone#
Save Phone# Save Phone#
Save Phone# to save the phone number in your Internal Phone Book. (See “Saving a Phone
Number” on page 16).
After receiving a call from or making a call to a phone number that is in your Internal Phone
Book, the Phone Book entry name, phone number and the duration of the call are displayed.
You can display the following menu options by pressing MENU/OK within 10 seconds after
disconnecting the call.
To select an option, highlight it and press MENU/OK.
Call Again
Call Again Call Again
Call Again to dial the phone number.
Call:Speaker On
Call:Speaker On Call:Speaker On
Call:Speaker On to dial the phone number in speakerphone mode.
Go to
Go to Go to
Go to Phone Book
Phone BookPhone Book
Phone Book
to save the other phone number into the same entry in your Internal
Phone Book.
Note:
Note:Note:
Note:
The End-of-Call options are not displayed for calls identified as No ID or Restricted.
Saving a Phone Number
Saving a Phone NumberSaving a Phone Number
Saving a Phone Number
Your PCS Phone can store a total of 500 phone numbers in 300 Internal Phone Book entries.
Each Phone Book entry can store 7 phone numbers, and the entry’s name can contain 16
characters. Your phone automatically sorts the Internal Phone Book entries alphabetically.
To save a number from the main menu:
1. Enter a phone number.
2. Press MENU/OK.
3. Highlight Save Phone#
Save Phone# Save Phone#
Save Phone# and press MENU/OK.
4. Select a label by highlighting Home
HomeHome
Home, Work
WorkWork
Work, Mobile
MobileMobile
Mobile, Pager
PagerPager
Pager, Data
DataData
Data, Fax
Fax Fax
Fax or No Label
No Label No Label
No Label and press
MENU/OK.
5. Enter a Name, and press MENU/OK. (See “Selecting a Character Input Mode” on page
45.) Or you can also save the phone number without a name by pressing MENU/OK from
the name entry display, highlighting Yes
Yes Yes
Yes and then pressing MENU/OK. If you have
already stored entries in the Contacts, you are prompted to select the following entry
modes:
![](/img.php?id=366831&img=bg12.png)
17
New Name
New Name New Name
New Name to enter a name directly.
From Ph
From PhFrom Ph
From Ph.
..
. Book
Book Book
Book to select a name from Contacts entry list.
6. Press Save (left softkey).
After you have saved the number, the new Internal Phone Book entry is displayed. (See
“Internal Phone Book Entry Options” on page 44).
Finding a Phone Number
Finding a Phone NumberFinding a Phone Number
Finding a Phone Number
Your phone searches the phone number in your Internal Phone Book that ends with the digits
you entered.
To find a phone number:
1. Enter four or more digits and press MENU/OK. The more numbers you enter, the more
specific the search becomes.
2. Highlight Find
Find Find
Find and press MENU/OK.
3. The Contacts entry list that ends with the digits you entered appears.
4. Highlight your desired entry.
Press MENU/OK to display the entry details.
Press TALK or SPEAKER to dial.
Dialing and Saving Phone Numbers With
Dialing and Saving Phone Numbers WithDialing and Saving Phone Numbers With
Dialing and Saving Phone Numbers With Pauses
Pauses Pauses
Pauses
You can dial or save phone numbers with pauses for use with automated systems, such as
voicemail or credit card billing numbers. If you select a hard pause, the next set of numbers is
sent when you press TALK or SPEAKER. If you select a 2-second pause, your phone
automatically sends the next set of numbers after two seconds.
Note:
Note: Note:
Note: You can have multiple pauses in a phone number and combine 2-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter the phone number and press MENU/OK.
2. Highlight either Hard Pause
Hard Pause Hard Pause
Hard Pause or 2
22
2-
--
-Sec. Pause
Sec. Pause Sec. Pause
Sec. Pause and press MENU/OK. Hard Pauses are
displayed as an “H” and 2-sec. pauses as a “T”.
3. Enter additional numbers.
4. Press MENU/OK, highlight Call
CallCall
Call or Call:Speaker On
Call:Speaker OnCall:Speaker On
Call:Speaker On to dial the number or Save Phone#
Save Phone#Save Phone#
Save Phone# to
save the number in your Internal Phone Book and press MENU/OK.
When dialing a number with a Hard pause, press MENU/OK and highlight Send Tone
Send Tone Send Tone
Send Tone and
press MENU/OK to send the next set of numbers.
![](/img.php?id=366831&img=bg13.png)
18
Four
FourFour
Four-
--
-Digit Dialing
Digit DialingDigit Dialing
Digit Dialing
Enter four digits and press MENU/OK to display the 4-Digit Dialing option. If you select
Abbrev.Dial
Abbrev.DialAbbrev.Dial
Abbrev.Dial, your phone dials the phone number in your Internal Phone Book that ends with
the four digits you entered. See page 29 for setting this feature.
To use 4-Digit Dialing:
1. Dial the last four digits of an Internal Phone Book entry’s phone number.
2. Press MENU/OK to display the menu options.
3. Highlight Abbrev.Dial
Abbrev.Dial Abbrev.Dial
Abbrev.Dial and press MENU/OK or TALK or SPEAKER.
Note:
Note: Note:
Note: 4-Digit Dialing dials the first number in your Internal Phone Book that matches the four
digits.
Dialing From the In
Dialing From the InDialing From the In
Dialing From the Internal Phone Book
ternal Phone Bookternal Phone Book
ternal Phone Book
1. Press MENU/OK to access the main menu.
2. Highlight Contacts
ContactsContacts
Contacts
and press MENU/OK.
3. Highlight Find
Find Find
Find Entry
Entry Entry
Entry and press MENU/OK.
Press right on the Navigation key for the shortcut (steps 1 through 3).
4. Use your Navigation key to scroll through the Phone Book list and highlight one of the
appropriate entries and press MENU/OK.
5. Select the box under your desired memory location by scrolling.
6. Press Options (right softkey) for the menu options.
7. Highlight your desired feature and press MENU/OK.
Using One
Using OneUsing One
Using One-
--
-To
ToTo
Touch Speed Dialing
uch Speed Dialinguch Speed Dialing
uch Speed Dialing
With this feature, you can dial Speed Dial entries using one key press for locations 2-9.
To use One-Touch Dialing
for Speed Dial locations 2-9:
Press and hold the appropriate key for two seconds.
The display confirms that the number has been dialed when it shows “Connecting…”.
![](/img.php?id=366831&img=bg14.png)
19
Controlling Your Phone
Controlling Your PhoneControlling Your Phone
Controlling Your Phone’
’’’s Settings
s Settingss Settings
s Settings
Reminder:
Reminder:Reminder:
Reminder:
To access the phone ’s main menu, press MENU/OK from standby mode. Menu
items may be selected by highlighting them with the Navigation key and pressing
MENU/OK .
Sound Settings
Sound SettingsSound Settings
Sound Settings
Ringer Types
Ringer TypesRinger Types
Ringer Types
Ringer types help you identify incoming calls and messages. You can assign ringer types to
individual Internal Phone Book entries, types of calls and types of messages.
● Programmed Ringers
Programmed RingersProgrammed Ringers
Programmed Ringers include a variety of standard ringer types and familiar music.
●
Vibrating Ringer
Vibrating RingerVibrating Ringer
Vibrating Ringer alerts you to call or messages without disturbing others.
●
Downloaded
Downloaded Downloaded
Downloaded Ringers
Ringers Ringers
Ringers can be downloaded right to your phone.
Selecting Ringer Types for Voice Calls
Selecting Ringer Types for Voice CallsSelecting Ringer Types for Voice Calls
Selecting Ringer Types for Voice Calls
Your PCS Phone provides a variety of ringer options, which allow you to customize your ringer
and volume settings.
To select a ringer type for voice calls so you recognize when a certain type of call is coming in by
the ringer:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Sounds
SoundsSounds
Sounds and press MENU/OK.
4. Select Ringer Type
Ringer TypeRinger Type
Ringer Type and press MENU/OK.
5. Highlight Voice Calls
Voice CallsVoice Calls
Voice Calls and press MENU/OK.
6. Select the menu under With Caller ID
With Caller IDWith Caller ID
With Caller ID, No Caller ID
No Caller ID No Caller ID
No Caller ID or Roaming
RoamingRoaming
Roaming and
press MENU/OK.
7. Highlight your desired ringer type and press MENU/OK.
If you selected Animation Ringer, preview display starts after step 7 above.
:
Get New: Get New:
Get New: start up a Browser and you can select an item to download.
Selecting Ringer Types for Voicemail
Selecting Ringer Types for Voicemail Selecting Ringer Types for Voicemail
Selecting Ringer Types for Voicemail
To select a ringer type for voicemail:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Sounds
SoundsSounds
Sounds and press MENU/OK.
4. Select Ringer Type
Ringer TypeRinger Type
Ringer Type and press MENU/OK.
5. Highlight Voicemail
Voicemail Voicemail
Voicemail and press MENU/OK.
6. Select the menu under Voicemail
VoicemailVoicemail
Voicemail and press MENU/OK.
![](/img.php?id=366831&img=bg15.png)
20
7. Highlight your desired ringer type and press MENU/OK.
Get New:
Get New:Get New:
Get New: start up a Browser and you can select an item to download.
Selecting Ringer Types for Messages
Selecting Ringer Types for MessagesSelecting Ringer Types for Messages
Selecting Ringer Types for Messages
To select a ringer type for text messages:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Sounds
SoundsSounds
Sounds and press MENU/OK.
4. Select Ringer Type
Ringer TypeRinger Type
Ringer Type and press MENU/OK.
5. Highlight Messaging
MessagingMessaging
Messaging and press MENU/OK.
6. Select the menu under Messaging
MessagingMessaging
Messaging and press MENU/OK.
7. Highlight your desired ringer type and press MENU/OK.
Get New:
Get New:Get New:
Get New: start up a Browser and you can select an item to download.
Setting Tone Length, Start
Setting Tone Length, StartSetting Tone Length, Start
Setting Tone Length, Start-
--
-up/Power
up/Powerup/Power
up/Power-
--
-off Tone
off Toneoff Tone
off Tone or Voice Prompt
or Voice Prompt or Voice Prompt
or Voice Prompt
You can determine the length of your key beep (you hear this when you press any key) or type
of the Start-up/Power off tone (sounds when you turn the phone on/off on this feature).
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Sounds
SoundsSounds
Sounds and press MENU/OK.
4. Select Others
OthersOthers
Others and press MENU/OK.
5. Select the menu under Tone Length
Tone LengthTone Length
Tone Length, Start
StartStart
Start-
--
-up Tone
up Toneup Tone
up Tone, Power
PowerPower
Power-
--
-off Tone
off Toneoff Tone
off Tone or Voice Prompt
Voice Prompt Voice Prompt
Voice Prompt
and press MENU/OK.
6. Highlight your desired option and press MENU/OK.
Get New:
Get New:Get New:
Get New: start up a Browser and you can select an item to download.
Tip
TipTip
Tip: The volume of Start-up Tone and Power-off Tone can be set through the volume setting. See
page 20-21 for instructions.
Tip
TipTip
Tip:
: :
: When ringer volume is set to Silence All
Silence AllSilence All
Silence All, voice prompts cannot be heard.
Adjusting the Phone
Adjusting the PhoneAdjusting the Phone
Adjusting the Phone’
’’’s Volume Settings
s Volume Settingss Volume Settings
s Volume Settings
To change the ringer/ key volume
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Sounds
SoundsSounds
Sounds and press MENU/OK.
4. Select Ringer/Key Vol.
Ringer/Key Vol.Ringer/Key Vol.
Ringer/Key Vol., and press MENU/OK.
5. Highlight Ringer Volume,
Ringer Volume,Ringer Volume,
Ringer Volume, Start
StartStart
Start-
--
-up/Pw
up/Pwup/Pw
up/Pw-
--
-off
offoff
off or Key Beep
Key Beep Key Beep
Key Beep and Press MENU/OK.
6. Highlight your desired volume level and press MENU/OK.
![](/img.php?id=366831&img=bg16.png)
21
Vibrate
Vibrate Vibrate
Vibrate alerts you to calls or messages without disturbing others.
●
●●
●
Ringer Off
Ringer OffRinger Off
Ringer Off to set the Voice Call ringer volume to off.(Only appears in Ringer Volume
Setting).
●
●●
●
Silence All
Silence AllSilence All
Silence All to set all the ringer volume to off. (Only appears in Ringer Volume
Setting).
To Adjust Earpiece volume:
1. Press MENU/OK to access the main menu.
2. Select Settings
Settings Settings
Settings and press MENU/OK.
3. Select Sounds
Sounds Sounds
Sounds and press MENU/OK.
4. Select Receiver Vol.
Receiver Vol. Receiver Vol.
Receiver Vol. and press MENU/OK.
5. Select your desired volume level and press MENU/OK.
Tip
TipTip
Tip: You can adjust the ringer volume in standby mode by using the Side Volume key on or the
earpiece volume during a call by using ▲/▼ on the Navigation keys or
Side Volume key.
Alert Notification
Alert NotificationAlert Notification
Alert Notification
Your phone comes with several different options to keep you aware of what’s going on by
sounding the alert or ringer.
Service
ServiceService
Services
ss
s sets alert On or Off for network services parameter changes.
Voicemail
Voicemail Voicemail
Voicemail sets alert to notify you of caller’s message(s).
Messaging
Messaging Messaging
Messaging sets alert to notify you of text message(s).
Minute Beep
Minute BeepMinute Beep
Minute Beep sets a minute reminder that beeps ten seconds before the end of each minute
during a call.
Signal Fade
Signal FadeSignal Fade
Signal Fade sets alert to notify you when your phone loses a signal during a call.
To set the alerts:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Sounds
SoundsSounds
Sounds and press MENU/OK.
4. Select Alerts
AlertsAlerts
Alerts and press MENU/OK.
5. Highlight your desired option and press MENU/OK.
6. If you selected Service
ServiceService
Service, Minute Beep
Minute BeepMinute Beep
Minute Beep or Signal Fade
Signal FadeSignal Fade
Signal Fade, select On
OnOn
On or Off
OffOff
Off.
If you selected Voicemail
VoicemailVoicemail
Voicemail
or Messaging
MessagingMessaging
Messaging, select Once
OnceOnce
Once, Repeat Alert
Repeat AlertRepeat Alert
Repeat Alert or Off
OffOff
Off.
Tip:
Tip: Tip:
Tip: Repeat Alert
Repeat AlertRepeat Alert
Repeat Alert sounds every two minutes for twenty minutes.
![](/img.php?id=366831&img=bg17.png)
22
Silence All
Silence AllSilence All
Silence All
There may be times when you need to silence your phone entirely. The phone’s Silent Mode
allows you to mute all sounds without turning your phone off.
To change your phone’s Silent Mode:
1.
Press MENU/OK to access the main menu.
2. Select Settings
Settings Settings
Settings and press MENU/OK.
3.
Select Sounds
Sounds Sounds
Sounds and press MENU/OK.
4.
Select Ringer/Key Vol.
Ringer/Key Vol. Ringer/Key Vol.
Ringer/Key Vol. and press MENU/OK.
5.
Select the menu under Ringer Volum
Ringer VolumRinger Volum
Ringer Volume
ee
e
and press MENU/OK.
6.
Highlight Silence All
Silence All Silence All
Silence All and press MENU/OK.
Tip:
Tip: Tip:
Tip: When Ringer Volume is set as Silence Al
Silence AlSilence Al
Silence All
ll
l, other items are changed to Off
Off Off
Off and cannot be
highlighted by cursor.
Display Settings
Display SettingsDisplay Settings
Display Settings
Changing the Greeting
Changing the GreetingChanging the Greeting
Changing the Greeting
The greeting can be up to 15 characters and is displayed on the first line of your phone’s display
screen in standby mode.
To change your greeting:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Greeting
GreetingGreeting
Greeting and press MENU/OK.
5. Select either Username
UsernameUsername
Username or Custom
CustomCustom
Custom.
Username
UsernameUsername
Username to display the username when you are signed in.
Custom
CustomCustom
Custom to customize the greeting by entering characters (Press Back to erase single
character, press and hold Back to erase entire entry. See pages 46-48 for the entering
method.)
6.Press MENU/OK.
Note
NoteNote
Note: When Calendar or Screen Saver is set for standby display, greeting is not displayed.
![](/img.php?id=366831&img=bg18.png)
23
Changing the Backlight Time Length
Changing the Backlight Time LengthChanging the Backlight Time Length
Changing the Backlight Time Length
The backlight setting lets you select how long the display screen and keypad are backlit after
any key press is made.
To change the backlight setting:
1. Press MENU/OK to access the main menu.
2. Select Setti
SettiSetti
Settings
ngsngs
ngs and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Backlight
BacklightBacklight
Backlight and press MENU/OK.
5. Select the menu under Main
MainMain
Main LCD
LCDLCD
LCD or Key
KeyKey
Key and press MENU/OK.
6. Select Always On
Always OnAlways On
Always On, Always Off
Always OffAlways Off
Always Off or your defined time length, and press MENU/OK.
Always Off
Always OffAlways Off
Always Off always turns the Backlight off.
Always On
Always OnAlways On
Always On always turns the Backlight on.
Note
NoteNote
Note: Always On
Always OnAlways On
Always On setting returns to previous value on next power cycle.
To change Keypad backlight setting:
1.
From the step 5 above, select the menu under Key
Key Key
Key or Sub LCD
Sub LCD Sub LCD
Sub LCD and press MENU/OK.
2.
Select Always Off
Always Off Always Off
Always Off or your defined time length, and press MENU/OK.
Note
NoteNote
Note: Long backlight setting affects the battery’s talk and standby times.
Changing the Display Screen
Changing the Display ScreenChanging the Display Screen
Changing the Display Screen
This feature lets you display the animation as a display for Standby, Outgoing calls or Service
Search.
To assign the Animation:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Animation
AnimationAnimation
Animation and press MENU/OK.
5. Highlight Standby
StandbyStandby
Standby, Outgoing Calls
Outgoing Calls Outgoing Calls
Outgoing Calls or
Servi
ServiServi
Service Search
ce Searchce Search
ce Search and press MENU/OK.
● Press Preview (right softkey) to see an example display.
6. Select the menu under the item and press MENU/OK.
7. Highlight your desired option and press MENU/OK.
For standby, also set animation starting time. Select the option under after
after after
after then highlight
your desired setting time.
Preset
PresetPreset
Preset: the pre-programmed data.
Downloads
DownloadsDownloads
Downloads: start up a browser and you can select an item to download.
To deactivate this feature, select Off
Off Off
Off during step 7 above.
![](/img.php?id=366831&img=bg19.png)
24
Setting the Display for Incoming Cal
Setting the Display for Incoming CalSetting the Display for Incoming Cal
Setting the Display for Incoming Calls
lsls
ls
You can set the color or downloaded image (screen saver) data to be shown on the Incoming Call
display.
Follow these steps:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Incoming Calls
Incoming CallsIncoming Calls
Incoming Calls and press MENU/OK.
5. Select the menu under Incoming Calls
Incoming CallsIncoming Calls
Incoming Calls and press MENU/OK.
6. Highlight your desired color or downloaded image (screen saver) data or picture and press
MENU/OK.
● Get New
Get NewGet New
Get New: start up a Browser and you can select an item to download.
● If you select the downloaded image (screen saver) data or picture during step 6 above, press
Preview (right softkey) to see an example display.
Note
NoteNote
Note: PCS Connection kit must be purchased for downloading the data from PC.
Setting the Display for t
Setting the Display for tSetting the Display for t
Setting the Display for the Standby Mode
he Standby Modehe Standby Mode
he Standby Mode
This feature enables you to select a variety of items to display on the standby mode.
Follow these steps:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Stan
StanStan
Standby
dbydby
dby
Display
DisplayDisplay
Display and press MENU/OK.
5. Select your desired item and press MENU/OK.
Screen Saver
Screen SaverScreen Saver
Screen Saver selects the screen saver to display.
Calendar
CalendarCalendar
Calendar displays the Calendar.
Digital Clock
Digital Clock Digital Clock
Digital Clock displays the local time in digital mode.
Analog Clock
Analog ClockAnalog Clock
Analog Clock displays the local time in analog mode.
World Clock
World ClockWorld Clock
World Clock displays the time of the selected country along with the local time. You can
scroll the World Clock list by pressing right or left on the Navigation key for changing
country, Summer (left softkey) / Standard (right softkey) for changing between summer
and standard time if applicable. The " * " icon indicates the summer time.
Tip
TipTip
Tip: You can also display the World Clock from Tools/Extras menu. See “Using the World
Clock” on page 64.
Default
DefaultDefault
Default sets this feature to default.
6. After following each system prompt or confirming the preview display, press MENU/OK to
save the setting.
![](/img.php?id=366831&img=bg1a.png)
25
Changing the
Changing the Changing the
Changing the Screen Saver
Screen SaverScreen Saver
Screen Saver
Your new PCS Phone offers you the option of displaying a screen saver while in standby mode.
To assign a screen saver:
1. Press MENU/OK to access the main menu.
2. Select Settings
Settings Settings
Settings and press MENU/OK.
3. Select Display
Display Display
Display and press MENU/OK.
4. Highlight Standby Display
Standby Display Standby Display
Standby Display and press MENU/OK.
5. Select Screen Saver
Screen Saver Screen Saver
Screen Saver and press MENU/OK.
6. Select the menu under Screen Saver
Screen Saver Screen Saver
Screen Saver and press MENU/OK.
7. Highlight your desired screen saver, and press MENU/OK.
Get New:
Get New: Get New:
Get New: start up a Browser and you can select an item to download.
Press Preview (right softkey) during step 7 above to see an example display.
8. Press Save (left softkey) to save the screen saver.
Tip:
Tip: Tip:
Tip: In no service area, Screen Saver, Calendar, Time (Large), or World Clock cannot be shown
on the standby display.
Changing the Display for
Changing the Display for Changing the Display for
Changing the Display for My Buddy
My BuddyMy Buddy
My Buddy
This feature enables you to see a funny animation for 30 seconds on the Main LCD after
opening the flip.
Follow these steps:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight My Buddy
My Buddy My Buddy
My Buddy and press MENU/OK.
6. Select On
On On
On or Off
Off Off
Off and press MENU/OK.
Press Preview (right softkey) to see a display preview.
Changing th
Changing thChanging th
Changing the Display Color
e Display Colore Display Color
e Display Color
To change the display color scheme:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Color
ColorColor
Color and press MENU/OK.
5. Highlight Main LCD
Main LCD Main LCD
Main LCD or Sub LCD
Sub LCD Sub LCD
Sub LCD and press MENU/OK.
6. Select your desired color and press MENU/OK.
![](/img.php?id=366831&img=bg1b.png)
26
Changing
ChangingChanging
Changing
the
the the
the Font Size
Font SizeFont Size
Font Size
There are four font size settings for the message notification and browser. To change the font
size, follow these steps:
1. Press MENU/OK to access the main menu.
2. Select Setting
SettingSetting
Settings
ss
s and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Font Size
Font SizeFont Size
Font Size and press MENU/OK.
5. Highlight Message
MessageMessage
Message or Browser
BrowserBrowser
Browser and press MENU/OK.
6. Highlight Small
Small Small
Small or Normal
NormalNormal
Normal, and press MENU/OK.
7. Select your desired font size.
● Press Preview (right softkey) to display a font size example.
8. Press MENU/OK to set the selected font.
Tip
TipTip
Tip: From the font example display, you can see the larger/smaller font displays by pressing the
right or left on the Navigation key.
Location Settings
Location Settings Location Settings
Location Settings
To enable your phone’s Location feature:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Location
LocationLocation
Location and press MENU/OK.
4.Press MENU/OK or OK. Or wait a few seconds until the message scrolls down completely.
5.Select On
OnOn
On and press MENU/OK.
To deactivate this feature, select Off
OffOff
Off during step 5 above.
Tip
TipTip
Tip: These icons lets you know whether information of your position is sent to the network or
not. If you are in no service or roaming area, indication is always
indicates the Location Service is enabled.
indicates the Location Service is disabled.
![](/img.php?id=366831&img=bg1c.png)
27
Setting Airplane Mode
Setting Airplane ModeSetting Airplane Mode
Setting Airplane Mode
This feature shuts all Incoming Calls or Outgoing Calls (except for 911 dialing) to prevent
interference with aircraft electronics.
To set Airplane Mode:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Highlight Others
OthersOthers
Others and press MENU/OK.
4. Highlight Airplane Mode
Airplane ModeAirplane Mode
Airplane Mode and press MENU/OK.
5. Read the message, and press MENU/OK or OK (left softkey).
Press Cancel (right softkey) to return to the Setting display.
6. Select On
On On
On and press MENU/OK.
To deactivate this feature, select Off
OffOff
Off during step 5 above.
Note:
Note: Note:
Note: While in Airplane mode, your phone’s standby screen will display “Phone Off“.
Setting TTY Mo
Setting TTY MoSetting TTY Mo
Setting TTY Mode
dede
de
This feature set the TTY Mode to On or Off.
A TTY (also known as TDD or Text Telephone), is a telecommunications device that allows
people who are deaf or hard of hearing, or who have speech or language disabilities, to
communicate by telephone. Connect the TTY device to the Headset Jack of Your PCS Phone.
Then, type the message you want to send on the TTY’s keyboard.
To Turn the TTY Mode On or Off:
1. From the standby mode, press ##889.
2. Press MENU/OK.
3. Highlight Save Phone#
Save Phone#Save Phone#
Save Phone# and press MENU/OK.
4. Press MENU/OK or OK. Or wait a few seconds until the message scrolls down completely.
5. Select Enable
Enable Enable
Enable or Disable
DisableDisable
Disable and press MENU/OK.
Phone Setup Options
Phone Setup OptionsPhone Setup Options
Phone Setup Options
My Shortcut
My ShortcutMy Shortcut
My Shortcut
You can arrange your own shortcut menu.
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Others
OthersOthers
Others and press MENU/OK.
4. Highlight My Shortcut
My ShortcutMy Shortcut
My Shortcut and press MENU/OK.
5. Select the menu under My Shortcut
My ShortcutMy Shortcut
My Shortcut and press MENU/OK.
6. Highlight your desired menu option and press MENU/OK.
Press Info (right softkey) during step 5 above to see the My Shortcut information.
![](/img.php?id=366831&img=bg1d.png)
28
Auto Answer
Auto AnswerAuto Answer
Auto Answer Mode
Mode Mode
Mode
This feature sets the phone to automatically pick up after 5 or 15 seconds. This feature works
with the hands-free car kit and headset (sold separately).
To activate this feature:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Others
OthersOthers
Others and press MENU/OK.
4. Highlight Auto Answer
Auto Answer Auto Answer
Auto Answer and press MENU/OK.
5. Highlight Car Kit/Headset
Car Kit/HeadsetCar Kit/Headset
Car Kit/Headset and press MENU/OK.
6. Select either 5 Seconds
5 Seconds5 Seconds
5 Seconds or 15 seconds
15 seconds15 seconds
15 seconds and press MENU/OK.
To deactivate this feature, select Off
OffOff
Off during step 5 above.
Setting Flip Options
Setting Flip OptionsSetting Flip Options
Setting Flip Options
This feature enables you to answer incoming calls by opening the clamshell so that you don’t
have to press TALK or SPEAKER.
To activate this feature:
1. Press MENU/OK to access the main menu.
2. Select Settings
Settings Settings
Settings and press MENU/OK.
3. Select Others
Others Others
Others and press MENU/OK.
4. Highlight Open/Close Flip
Open/Close Flip Open/Close Flip
Open/Close Flip and press MENU/OK.
5. Highlight Open
Open Open
Open and press MENU/OK.
6. Select Answer Call
Answer CallAnswer Call
Answer Call and press MENU/OK.
To deactivate this feature, highlight No Action
No Action No Action
No Action during step 5 above.
Setting Any Key Answer
Setting Any Key AnswerSetting Any Key Answer
Setting Any Key Answer
This feature allows you to answer incoming calls by pressing any key (except MENU/OK, END,
BACK, Side Volume key, Ready Link key, and Navigation key).
To activate this feature:
1. Press MENU/OK to access the main menu.
2. Select S
SS
Settings
ettingsettings
ettings and press MENU/OK.-
3. Select Others
OthersOthers
Others and press MENU/OK.
4. Highlight Any Key Answer
Any Key AnswerAny Key Answer
Any Key Answer and press MENU/OK.
5. Select On
OnOn
On and press MENU/OK.
To deactivate this feature, select Off
OffOff
Off during step 5 above.
![](/img.php?id=366831&img=bg1e.png)
29
Setting
Setting Setting
Setting Abbreviated Dialing
Abbreviated DialingAbbreviated Dialing
Abbreviated Dialing
Abbreviated Dialing is another form of speed dialing. If the last four digits you enter do not
match any stored phone book entry, the digits are automatically prepended with the digits
specified using the following steps.
To activate this feature:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Others
OthersOthers
Others and press MENU/OK.
4. Highlight Abbrev. Dial
Abbrev. DialAbbrev. Dial
Abbrev. Dial and press MENU/OK.
5. Select Enable
EnableEnable
Enable and press MENU/OK.
6. Enter a six-digit number and press MENU/OK or OK (left softkey).
If you want to deactivate this feature, select Disable
DisableDisable
Disable during step 5 above.
Tip
TipTip
Tip: If you enter less than 6 digits, the display shows a warning message.
Headset Mode
Headset ModeHeadset Mode
Headset Mode
To set Headset mode:
1.
1.1.
1.Press to access the main menu.
2.
2.2.
2.Select Settings
Settings Settings
Settings and press MENU/OK .
3.
3.3.
3.Select Others
Others Others
Others and press MENU/OK.
4.
4.4.
4.Highlight Headset Mode
Headset Mode Headset Mode
Headset Mode and press MENU/OK.
5.
5.5.
5.Select Voice Call
Voice Call Voice Call
Voice Call or Ready Link
Ready Link Ready Link
Ready Link and press MENU/OK.
Press Info
InfoInfo
Info (right softkey) during step 5 above to see the Headset Mode information.
To deactivate this feature, select Off
Off Off
Off during step 5 above.
Setting Side Key Guard
Setting Side Key GuardSetting Side Key Guard
Setting Side Key Guard
This feature enables you to lock your side key (Ready Link key, Side Volume key and Side Call
key)while the clamshell is closed.
To activate this feature:
1. Press MENU/OK to access the main menu.
2. Select Settings
Settings Settings
Settings and press MENU/OK.
3. Select Others
Others Others
Others and press MENU/OK.
4. Highlight Side Key Guard
Side Key Guard Side Key Guard
Side Key Guard and press MENU/OK.
5. Select On
On On
On and press MENU/OK.
“Side Key Guard” message appears on the Sub LCD when you press any side key while the
clamshell is closed.
To deactivate this feature, select Off
OffOff
Off
during step 5 above.
Note
NoteNote
Note: This feature does not apply when the clamshell is open.
![](/img.php?id=366831&img=bg1f.png)
30
Sleep Mode
Sleep ModeSleep Mode
Sleep Mode
This feature helps conserve your battery power by restricting the display.
To set sleep mode:
1. From standby mode, press MENU/OK to display the main menu.
2. Select Sett
SettSett
Settings
ingsings
ings and press MENU/OK.
3. Select Display
DisplayDisplay
Display and press MENU/OK.
4. Highlight Sleep Mode
Sleep ModeSleep Mode
Sleep Mode and press MENU/OK.
5. Highlight Main LCD
Main LCD Main LCD
Main LCD or Sub LCD
Sub LCD Sub LCD
Sub LCD and press MENU/OK.
6. Select your desired option and press MENU/OK.
To deactivate this feature, highlight Off
OffOff
Off during step 6 above.
Setting Message Notification
Setting Message NotificationSetting Message Notification
Setting Message Notification
You can see message notification when you receive Text message or Voicemail while you are in
PCS applications or Browser mode.
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Messaging
MessagingMessaging
Messaging and press MENU/OK.
4. Check the box next to Games/Apps
Games/AppsGames/Apps
Games/Apps or Browser
Browser Browser
Browser and press Save (left softkey).
Press Info
InfoInfo
Info (right softkey) during step 4 above to see the Messages information.
Changing the Menu Language
Changing the Menu LanguageChanging the Menu Language
Changing the Menu Language
When you first turn your phone on, the menus are displayed in English.
To change the menu language to Spanish, follow these steps.
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Others
OthersOthers
Others and press MENU/OK.
4. Highlight Language
LanguageLanguage
Language and press MENU/OK.
5. Select Español
EspañolEspañol
Español and press MENU/OK.
![](/img.php?id=366831&img=bg20.png)
31
Setting Your Phone’s Security
Setting Your Phone’s SecuritySetting Your Phone’s Security
Setting Your Phone’s Security
Accessing the Security Menu
Accessing the Security MenuAccessing the Security Menu
Accessing the Security Menu
You must enter your lock code to view the Security menu.
To access the Security menu:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Security
Security Security
Security and press MENU/OK.
4. Enter lock code.
Tip:
Tip: Tip:
Tip: If you can’t recall your lock code, try using the last four digits of either your Social Security
number or PCS Phone Number or try 0000.
Locking Your Phone
Locking Your PhoneLocking Your Phone
Locking Your Phone
When your phone is locked, your phone allows you to restrict the incoming calls and make calls
except 911 and special numbers.
To lock your phone:
1. From the Security Menu display (See “Accessing the Security Menu” on page 31), select Lock
Lock Lock
Lock
Phone
PhonePhone
Phone and press MENU/OK.
2. Select Lock now
Lock nowLock now
Lock now or On Power
On Power On Power
On Power-
--
-u
uu
up
pp
p and press MENU/OK.
3. Depending on your preference, highlight either Full Lock
Full LockFull Lock
Full Lock or Except Incom.Calls
Except Incom.CallsExcept Incom.Calls
Except Incom.Calls and press
MENU/OK.
● Full Lock:
Full Lock: Full Lock:
Full Lock: All phone calls except for Emergency# or Special #s cannot be made. And no
phone calls can be received except for Special #s.
● Except Incom.Calls.:
Except Incom.Calls.: Except Incom.Calls.:
Except Incom.Calls.: All phone calls except for Emergency# or Special #s cannot be made.
But all incoming calls can be received.
Tip
TipTip
Tip: If you want to cancel the “On Power-up” setting before turning the phone off, select
Unlocked
UnlockedUnlocked
Unlocked during step 2 above.
Unl
UnlUnl
Unlocking Your Phone
ocking Your Phoneocking Your Phone
ocking Your Phone
To unlock your phone:
1. From the Locked display, press Unlock (left softkey).
2. Enter your lock code.
Changing the Lock Code
Changing the Lock CodeChanging the Lock Code
Changing the Lock Code
1. From the Security Menu display (See “Accessing the Security Menu” on page 31),
highlight Others
OthersOthers
Others and press MENU/OK.
2. Highlight Change Lock
Change LockChange Lock
Change Lock and press MENU/OK.
3.
Enter new lock code, 1234
1234 1234
1234 for example, in the box under New Cod
New CodNew Cod
New Code
ee
e.
4.
Reenter the new lock code in the box under Reenter Cod
Reenter CodReenter Cod
Reenter Code
ee
e.
![](/img.php?id=366831&img=bg21.png)
32
Calling in Lock M
Calling in Lock MCalling in Lock M
Calling in Lock Mode
odeode
ode
You can place calls to 911 and to your special numbers when in lock mode.
To place an outgoing call in lock mode:
To call an Emergency number or special number, enter the phone number and
press TALK or SPEAKER. (For Emergency numbers, see “Calling Emergency Numbers”
on page 14).
Restricting Calls
Restricting CallsRestricting Calls
Restricting Calls
You can restrict both incoming calls and outgoing calls if necessary. (The Restrict Calls setting
does not apply to 911).
To restrict calls:
1. From the Security Menu display (See “Accessing the Security Menu” on page 31), select
Others
OthersOthers
Others and press MENU/OK.
2. Highlight Limit Use
Limit UseLimit Use
Limit Use and press MENU/OK.
3. Select the menu under Outgoing Calls
Outgoing CallsOutgoing Calls
Outgoing Calls or Incoming Calls
Incoming CallsIncoming Calls
Incoming Calls and press MENU/OK.
4. Highlight your desired option and press MENU/OK.
Options:
Allow All
Allow AllAllow All
Allow All: You can make or receive all calls.
Phone Book Only
Phone Book OnlyPhone Book Only
Phone Book Only: Only Phone Book entries, Voicemail, or Special #s are available to make
or receive calls.
Special #s Only
Special #s OnlySpecial #s Only
Special #s Only: Only three special numbers’ entries are available to make or receive calls.
Note
NoteNote
Note: To unrestrict all calls, select Allow All
Allow All Allow All
Allow All during step 4 above.
Note
NoteNote
Note: Restricted incoming calls are forwarded to voicemail.
Using Special Numbers
Using Special NumbersUsing Special Numbers
Using Special Numbers
You can save three special numbers in addition to your Internal Phone Book entries (the same
number may be in both directories). You can make and receive calls from special numbers even
when your phone is locked.
To add or replace a special number:
1. From the Security Menu display (See “Accessing the Security Menu” on page 31), highlight
Others
OthersOthers
Others and press MENU/OK.
2. Highlight Special #s
Special #sSpecial #s
Special #s and press MENU/OK.
3. Highlight the box under the entry number and press MENU/OK.
4. Enter your desired phone number and press MENU/OK.
-or-
Press Options (right softkey), then highlight From Ph
From PhFrom Ph
From Ph.
..
. Book
Book Book
Book or Voicemail
VoicemailVoicemail
Voicemail and press
MENU/OK.
![](/img.php?id=366831&img=bg22.png)
33
To insert pauses into a number:
1. From the step 4 above, enter the phone number and press Options (right softkey) for the
options.
2. Highlight Hard Pause
Hard PauseHard Pause
Hard Pause, 2
22
2-
--
-Second Pause
Second PauseSecond Pause
Second Pause or Hyphen
HyphenHyphen
Hyphen, and press MENU/OK.
3.Finish entering the rest of the numbers, and press MENU/OK.
Note
NoteNote
Note: During Speed Dial entry, There are no Speed Dial options associated with special
numbers.
Erasing the Internal Phone Book
Erasing the Internal Phone BookErasing the Internal Phone Book
Erasing the Internal Phone Book
To erase all the names and phone numbers in your Internal Phone Book:
1.From the Security Menu display (See “Accessing the Security Menu” on page 31), highlight
Erase Ph
Erase PhErase Ph
Erase Ph.
. .
. Book
BookBook
Book and press MENU/OK.
2. If you’re sure you want to erase your Phone Book, highlight Yes
YesYes
Yes and press MENU/OK.
Erasing the Downloads
Erasing the DownloadsErasing the Downloads
Erasing the Downloads
To erase all the downloaded data from web:
1.From the Security Menu display (See “Accessing the Security Menu” on page 31), highlight
EraseDownload
EraseDownloadEraseDownload
EraseDownload and press MENU/OK.
2. If you’re sure you want to erase downloaded data from web, highlight Yes
YesYes
Yes and press
MENU/OK.
If you have assigned downloaded data, the function returns to its default setting.
Resetting Your Phone
Resetting Your PhoneResetting Your Phone
Resetting Your Phone
Resetting the phone restores all the factory defaults, including the ringer types and display
settings. The Internal Phone Book, Call History, Scheduler and Messages are not affected.
To reset your phone:
1.From the Security Menu display (See “Accessing the Security Menu” on page 31), highlight
Reset Phone
Reset PhoneReset Phone
Reset Phone, and press MENU/OK.
2. If you’re sure you want to reset your phone, highlight Yes
YesYes
Yes and press MENU/OK.
![](/img.php?id=366831&img=bg23.png)
34
Resetting and Locking Your Phone through SMS
Resetting and Locking Your Phone through SMSResetting and Locking Your Phone through SMS
Resetting and Locking Your Phone through SMS
When your phone is lost or stolen, you can erase your important personal information (such as
phone book entries, call history and messages) and lock your phone by sending a special
formatted SMS message to your phone.
Send the following format from your computer:
\\RESET **<Passcode>**RESET
<Passcode> – your defined passcode.
Default Passcode is 11-digit ESN(Electronic Serial Number) which is written on
the package or phone itself.
To activate this feature, the following presetting is required:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Security
SecuritySecurity
Security and press MENU/OK.
4. Enter your lock code.
5. Select Others
OthersOthers
Others and press MENU/OK.
6. Highlight Found Me
Found MeFound Me
Found Me and press MENU/OK.
7. Highlight Reset/Lock
Reset/LockReset/Lock
Reset/Lock and press MENU/OK.
8. Select Enable
EnableEnable
Enable and press MENU/OK.
To unlock a phone that has been locked through SMS, bring the phone to Customer center.
Changing the Passcode
Changing the PasscodeChanging the Passcode
Changing the Passcode
To change the passcode for the special formatted SMS messages.
1.
Press MENU/OK to access the main menu.
2.
Select Settings
Settings Settings
Settings and press MENU/OK.
3.
Select Security
Security Security
Security and press MENU/OK.
4.
Enter lock code.
5.
Select Others
Others Others
Others and press MENU/OK.
6.
Highlight Found Me
Found Me Found Me
Found Me and press MENU/OK.
7.
Highlight Chg passcode
Chg passcode Chg passcode
Chg passcode and press MENU/OK.
8.
Enter new passcode in the box under New Passcode
New Passcode New Passcode
New Passcode (11 digits).
9.
Reenter the new passcode in the box under Reenter Cod
Reenter CodReenter Cod
Reenter Code.
![](/img.php?id=366831&img=bg24.png)
35
Controlling Your Roaming Experience
Controlling Your Roaming ExperienceControlling Your Roaming Experience
Controlling Your Roaming Experience
Understanding Roaming
Understanding RoamingUnderstanding Roaming
Understanding Roaming
Recognizing Icons on the Display Screen
Recognizing Icons on the Display ScreenRecognizing Icons on the Display Screen
Recognizing Icons on the Display Screen
Your phone’s display screen always lets you know when you’re off the Nationwide PCS Network
and whether your phone is operating in analog or digital mode. The following chart indicates
what you’ll see depending on where you’re using your phone.
Main LCD
Main LCDMain LCD
Main LCD
Roaming Indicator
Roaming IndicatorRoaming Indicator
Roaming Indicator
Nationwide PCS Network
Other/Analog Networks
Sub LCD
Sub LCDSub LCD
Sub LCD
Roaming Indicator
Roaming IndicatorRoaming Indicator
Roaming Indicator
Analog
AnalogAnalog
Analog Indicator
Indicator Indicator
Indicator
Nationwide PCS Network
Other Digital Networks Digital Roam
Digital RoamDigital Roam
Digital Roam
Analog Networks
Analog Roam
Analog RoamAnalog Roam
Analog Roam
Tip:
Tip: Tip:
Tip: Remember, when you are using your phone off the Nationwide PCS Network, always dial
numbers using 11 digits (1 + area code + number).
Note:
Note: Note:
Note: You will pay a higher per-minute rate for roaming calls.
Roaming on Other Digital Networks
Roaming on Other Digital NetworksRoaming on Other Digital Networks
Roaming on Other Digital Networks
When you’re roaming on other digital networks, your call quality and security will be similar to
the quality you receive when making calls while on the enhanced Nationwide PCS Network.
You may not be able to access certain calling features.
Roaming on Analog Networks
Roaming on Analog NetworksRoaming on Analog Networks
Roaming on Analog Networks
When you roam on analog networks, you will experience a similar quality provided by other
analog carriers today. Although some calling features will be unavailable, you can still make
and receive calls and access voicemail. You will experience a few differences:
You are more likely to experience static, cross-talk, fade-out and dropped calls.
Some calling features, which are standard on the enhanced Nationwide PCS Network,
such as Call Waiting PCS products and services and direct international dialing, are
unavailable.
Though callers can leave voicemail messages while you are roaming, you will not receive
notification until you return to the Nationwide PCS Network. While roaming, you can
periodically check your voicemail for new messages by dialing 1+areacode+your PCS
Phone Number. Press * when you hear your greeting and enter your pass code at the
![](/img.php?id=366831&img=bg25.png)
36
prompt.
There are security and privacy risks (eavesdropping and cloning) that exist with
conventional analog services today.
Your battery needs recharging sooner when you use your phone for analog roaming.
Note:
Note: Note:
Note: If you’re on a call when you leave the Nationwide PCS Network and enter an area where
roaming is available (whether digital or analog), your call is dropped. If your call is
dropped in an area where you think PCS Service is available, turn your phone off and on
again to reconnect to the Nationwide PCS Network.
Note:
Note: Note:
Note: When using your phone in analog mode, the handset may feel warm. This behavior is
normal for analog operation.
Setting Your Phone
Setting Your PhoneSetting Your Phone
Setting Your Phone’
’’’s Roam Mode
s Roam Modes Roam Mode
s Roam Mode
Your PCS Phone allows you to control your ability to roam. By using the Roaming
Roaming Roaming
Roaming menu option,
you can determine which signals your phone accepts.
Set Mo
Set MoSet Mo
Set Mode
dede
de
Choose from three different settings on your dual band/tri mode phone to control your roaming
experience:
1.
Press MENU/OK to access the main menu.
2.
Select Settings
Settings Settings
Settings and press MENU/OK.
3.
Select Roaming
Roaming Roaming
Roaming and press MENU/OK.
4.
Highlight Set Mode
Set Mode Set Mode
Set Mode and press MENU/OK.
5.
To select an option, select it and press MENU/OK.
PCS
PCSPCS
PCS
Automatic
Automatic Automatic
Automatic
Analog
AnalogAnalog
Analog
Cellular
CellularCellular
Cellular
Controlling Roaming Charges Using
Controlling Roaming Charges Using Controlling Roaming Charges Using
Controlling Roaming Charges Using Call Guard
Call GuardCall Guard
Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming charges apply. This
feature makes it easy to manage your roaming charges by reminding you when you make or
receive roaming calls. It also requires you to take additional steps before placing or answering a
roaming call. These additional steps are not required when you make or receive calls while on
the enhanced Nationwide PCS Network.
To Turn the Call Guard Feature On or Off:
To Turn the Call Guard Feature On or Off:To Turn the Call Guard Feature On or Off:
To Turn the Call Guard Feature On or Off:
1. Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
![](/img.php?id=366831&img=bg26.png)
37
3. Select Roaming
Roaming Roaming
Roaming and press MENU/OK.
4. Highlight Call Guard
Call Guard Call Guard
Call Guard and press MENU/OK.
5. Select On
On On
On or Off
Off Off
Off and press MENU/OK.
To Place Roaming Calls With Call Guard On:
To Place Roaming Calls With Call Guard On:To Place Roaming Calls With Call Guard On:
To Place Roaming Calls With Call Guard On:
1.
From the standby mode, dial 1 + area code + the seven-digit number. (You can also initiate a
call from the Internal Phone Book, Call History or Messaging).
2.
Press TALK or SPEAKER or press MENU/OK, highlight Call
Call Call
Call or Call:Speaker On
Call:Speaker On Call:Speaker On
Call:Speaker On and press
MENU/OK.
3.
Press 1 to proceed while the pop-up message is displayed.
-or-
Press any key to erase the pop-up message, then press MENU/OK, highlight
Roam Call
Roam Call Roam Call
Roam Call or Roam:Speaker
Roam:Speaker Roam:Speaker
Roam:Speaker and press MENU/OK.
To Answer Inco
To Answer IncoTo Answer Inco
To Answer Incoming Roaming Calls With Call Guard On:
ming Roaming Calls With Call Guard On:ming Roaming Calls With Call Guard On:
ming Roaming Calls With Call Guard On:
1.
Press TALK or SPEAKER.
2.
Press 1 to proceed while the pop-up message is displayed.
-or-
1. Press MENU/OK, highlight Answer
Answer Answer
Answer or Answer:Speaker
Answer:Speaker Answer:Speaker
Answer:Speaker and press MENU/OK.
Remember if the Call Guard feature is set to On
OnOn
On, you need to take extra steps to make and
receive roaming calls even if you have selected the Analog
Analog Analog
Analog setting.
![](/img.php?id=366831&img=bg27.png)
38
Navigating Through Menus
Navigating Through MenusNavigating Through Menus
Navigating Through Menus
Menu Navigation
Menu NavigationMenu Navigation
Menu Navigation
The Navigation key on your PCS Phone allows you to scroll through menus quickly and easily.
To navigate through a menu, simply press the ▲/▼ on Navigation key. As you navigate
through the menu, menu options are highlighted. Select an option by highlighting it and
pressing MENU/OK.
Menu Structure
Menu StructureMenu Structure
Menu Structure
Selecting Menu Items
Selecting Menu ItemsSelecting Menu Items
Selecting Menu Items
As you navigate through a menu, the options are highlighted. Select an option by highlighting it
and pressing MENU/OK.
For example, if you want to view your last incoming call:
1.
Press MENU/OK to access the main menu.
2.
Highlight Call History
Call History Call History
Call History and press MENU/OK. (It may already be highlighted).
3.
Press ▼on the Navigation key to highlight Incoming Calls
Incoming Calls Incoming Calls
Incoming Calls and press MENU/OK.
If you have received any calls, they are displayed on the screen.
Backing Up Within a Menu
Backing Up Within a MenuBacking Up Within a Menu
Backing Up Within a Menu
To go to the previous menu:
Press Back
To go to the standby display:
Press END/.
Shortcuts
ShortcutsShortcuts
Shortcuts
Left Navigation key ( ) to take a shortcut to the My Shortcut menu.
Right Navigation key ( ) to take a shortcut to the phone book (Find Name).
Up Navigation key (▲) to take a shortcut to the Messaging.
Down Navigation key(▼) to take a shortcut to the Downloads.
39
Viewing the Menus
Viewing the MenusViewing the Menus
Viewing the Menus
Menu Diagram
Menus let you check or change your phone settings. The following outline shows your
phone’s menu structure.
1.
1.1.
1.
Call History
1. Outgoing Calls
2. Incoming Calls
3. Missed Calls
4. Erase History
2.
2.2.
2.
Contacts
1. Find/Add Entry
2. Speed Dial#s
3. My Phone#
4. Services
3.
3.3.
3.
Messaging
1. Send Message
2. PictureMail(xx)
3. Text Msg(xxx)
4. Go to PCS Mail
5. Voicemail
4.
4.4.
4.
Web
5.
5.5.
5.
Picture/Video
1. Take Picture
2. Take Video
3. My Video
4. Online Media
5. Account Info
6. Setting
6.
6.6.
6.
Downloads
1. Games
2. Ringers
3. Screen Savers
4. Applications
5. Dynamic
6. Others
7.
7.7.
7.
Settings
1. Sounds
2. Display
40
3. PCS Vision
4. Location
5. Roaming
6. Messaging
7. Security
8. Others
8.
8.8.
8.
Tools/Extras
1. Calendar
2. Calculator
3. World Clock
4. PC Sync
9.
9.9.
9.
Voice Services
1. Voice Memo
2. Screen Call
3. Voice Dial
![](/img.php?id=366831&img=bg2a.png)
41
Managing Call History
Managing Call HistoryManaging Call History
Managing Call History
Viewing Call History
Viewing Call History Viewing Call History
Viewing Call History
You’ll find your Call History invaluable. It is a list of the last 20 phone numbers or Internal
Phone Book entries for each calls you placed, accepted or missed. Call History makes redialing
a number fast and easy. It is continually updated as new numbers are added to the beginning of
the list and the oldest entries are removed from the bottom of the list.
Each entry contains the phone number (if it is available) and Internal Phone Book entry name
(if the phone number is in your Internal Phone Book). Duplicate calls (same number and type of
call) may only appear once on the list.
To view a Call History entry:
1.
Press MENU/OK to access the main menu.
2.
Highlight Call History
Call History Call History
Call History and press MENU/OK.
3.
Highlight Outgoing Calls
Outgoing CallsOutgoing Calls
Outgoing Calls, Incoming Calls
Incoming Calls Incoming Calls
Incoming Calls or Missed Calls
Missed Calls Missed Calls
Missed Calls and press MENU/OK.
Call History Options
Call History OptionsCall History Options
Call History Options
For additional information and options for a particular call, highlight a Call History entry and
press MENU/OK. This feature gives you the option of selecting:
Call
Call Call
Call to dial the phone number.
Call:Speaker On
Call:Speaker On Call:Speaker On
Call:Speaker On to dial the phone number with speakerphone mode.
Save Phone#
Save Phone# Save Phone#
Save Phone# to save the phone number if it is not already in your Internal Phone Book (if
applicable) or if the caller’s phone number has already been stored in the any Phone Book
entry, Go to Phone Book
Go to Phone Book Go to Phone Book
Go to Phone Book appears instead of Save Phone
Save PhoneSave Phone
Save Phone#. (See “Saving a Phone Number
From Call History” on page 42).
Prepend
Prepend Prepend
Prepend to add numbers to the beginning of the phone number. (See “Prepending a Phone
Number From Call History” on page 43).
View
View View
View to view the caller’s information.
..
.
Erase
Erase Erase
Erase to erase the entry.
Tip:
Tip: Tip:
Tip: You can also view the next Call History entry by pressing the Navigation key right or view
the previous entry by pressing the Navigation key left.
Making a Call from Call History
Making a Call from Call HistoryMaking a Call from Call History
Making a Call from Call History
To place a call from Call History:
1. Press MENU/OK to access the main menu.
2. Select Call History
Call History Call History
Call History and press MENU/OK.
3. Select Outgoing Calls
Outgoing CallsOutgoing Calls
Outgoing Calls, Incoming Calls
Incoming Calls Incoming Calls
Incoming Calls or Missed Calls
Missed CallsMissed Calls
Missed Calls.
4. Press MENU/OK.
5. Highlight the entry you want to call by scrolling through the list.
![](/img.php?id=366831&img=bg2b.png)
42
6. Press TALK or SPEAKER .
-or-
Press MENU/OK, highlight Call
Call Call
Call or Call:Speaker On
Call:Speaker OnCall:Speaker On
Call:Speaker On
and press MENU/OK.
Note:
Note: Note:
Note: You cannot make calls from Call History to entries identified as No ID or Restricted.
Saving a Phone Number Fr
Saving a Phone Number FrSaving a Phone Number Fr
Saving a Phone Number From Call History
om Call Historyom Call History
om Call History
Your PCS Phone can store up to 300 Internal Phone Book entries. Phone Book entries can store
up to a total of 500 phone numbers and each entry’s name can contain 16 characters.
To save a phone number from Call History:
1.
Highlight the call history entry you want to save.
2.
Press MENU/OK to display the options.
3.
Highlight Save Phone#
Save Phone# Save Phone#
Save Phone# and press MENU/OK.
4.
Highlight appropriate label (Home, Work, Mobile, Pager, Data, Fax or No Label), and press
MENU/OK.
5. Enter a Name, and press MENU/OK or OK (left softkey). Or you can also save the phone
number without a name by pressing MENU/OK from the name entry display, highlight
Yes
Yes Yes
Yes and then press MENU/OK. If you have already stored entries in the Phone Book, you
are prompted to select the following entry mode.
New Name
New Name New Name
New Name to enter a name directly.
From Ph. Book
From Ph. Book From Ph. Book
From Ph. Book to select a name from Phone Book entry list.
6.
Press Save (left softkey).
Note:
Note: Note:
Note: You cannot save phone numbers from calls identified as No ID or Restricted. If the
selected entry has already been stored in the phone book, “Alternate
AlternateAlternate
Alternate” appears during
step 3 above.
After you have saved the number, the new Internal Phone Book entry is displayed. (See
“Internal Phone Book Entry Options” on page 44.)
![](/img.php?id=366831&img=bg2c.png)
43
Prepending a Phone Number From Call Histor
Prepending a Phone Number From Call HistorPrepending a Phone Number From Call Histor
Prepending a Phone Number From Call History
yy
y
If you need to make a call from Call History and you happen to be outside your local area code,
you can add the appropriate prefix by following these steps:
1.
Highlight a call history entry and press MENU/OK.
2.
Highlight Prepend
Prepend Prepend
Prepend and press MENU/OK.
3.
Enter the digits you want to add to the number.
If you want to save the number, press MENU/OK and select Save Phone#
Save Phone# Save Phone#
Save Phone# from options.
If not, the changes only apply to the current call.
To select an option, highlight it and press MENU/OK.
Call
Call Call
Call to dial the phone number.
Call: Speaker On
Call: Speaker On Call: Speaker On
Call: Speaker On to dial the phone number with speakerphone mode.
Save Phone#
Save Phone# Save Phone#
Save Phone# to store the phone number in your Internal Phone Book.
Hard Pause
Hard Pause Hard Pause
Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With
Pauses” on page 17).
2
22
2-
--
-Sec
SecSec
Sec.
..
. Pause
Pause Pause
Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers With
Pauses” on page 17).
Erasing Call History
Erasing Call HistoryErasing Call History
Erasing Call History
To erase individual Call History entries, see “Call History Options” on page 41.
To erase Call History:
1.
Press MENU/OK to access the main menu.
2.
Select Call History
Call History Call History
Call History and press MENU/OK.
3. Select Erase History
Erase HistoryErase History
Erase History and press MENU/OK.
4. Highlight the category you want to erase and press MENU/OK.
5.
Highlight Yes
Yes Yes
Yes and press MENU/OK.
You can also select All Calls
All CallsAll Calls
All Calls at the previous step 4 above to erase all Call History.
![](/img.php?id=366831&img=bg2d.png)
44
Using your Internal Phone Book
Using your Internal Phone BookUsing your Internal Phone Book
Using your Internal Phone Book
Internal Phone Book Entry Options
Internal Phone Book Entry OptionsInternal Phone Book Entry Options
Internal Phone Book Entry Options
To access an Internal Phone Book Entry’s options, display the entry list, highlight an entry and
press MENU/OK, then select a phone number and press Options (right softkey). To select an
option, highlight it and press MENU/OK.
Edit
EditEdit
Edit to edit your desired label
Call
Call Call
Call to dial the phone number. (If you are roaming and have the Call Guard feature
activated, you are required to take an extra step to proceed. See “Controlling Roaming
Charges Using Call Guard” on pages 36-37).
Call:Speaker On
Call:Speaker On Call:Speaker On
Call:Speaker On to dial the phone number with speakerphone mode.
Call Alarm
Call Alarm Call Alarm
Call Alarm to set the call alarm to the entry.
Set Speed Dial
Set Speed Dial Set Speed Dial
Set Speed Dial to set the speed dial to the entry.
Set Voice Dial
Set Voice Dial Set Voice Dial
Set Voice Dial to set the voice dial to the entry.
Prepend
Prepend Prepend
Prepend to alter a phone number by adding additional numbers.
When you are in edit display the following options are displayed:
Send PCS Mail
Send PCS MailSend PCS Mail
Send PCS Mail to send the email. (Only Email
EmailEmail
Email label)
Visit Site
Visit Site Visit Site
Visit Site to visit the Website. (Only Web
Web Web
Web label)
Edit
EditEdit
Edit to edit your desired label.
Erase
Erase Erase
Erase to erase your desired label.
Tip:
Tip: Tip:
Tip: You can view the next entry by pressing the right Navigation key or view the
previous entry by pressing left on the Navigation key.
You can erase the selected entry from the Phone Book list.
1.Press right on the Navigation key to display the Phone Book list.
2.Press Options (Right softkey).
3.Highlight Erase Entry
Erase EntryErase Entry
Erase Entry and press MENU/OK.
4.Highlight Yes
Yes Yes
Yes and press MENU/OK.
![](/img.php?id=366831&img=bg2e.png)
45
Selecting a Character Input Mode
Selecting a Character Input ModeSelecting a Character Input Mode
Selecting a Character Input Mode
Your PCS Phone™ provides convenient ways to enter words, letters, punctuation and numbers
whenever you are prompted to enter text (for example, when adding an Internal Phone Book
entry).
To change the character input mode:
1.
When you display a screen where you can enter text, press right softkey to display the input
mode menu.
2.Highlight your desired mode from T9 Word, Alphabet
T9 Word, AlphabetT9 Word, Alphabet
T9 Word, Alphabet, SYMBOL, NUMBER
SYMBOL, NUMBERSYMBOL, NUMBER
SYMBOL, NUMBER,
CANNED SUFFIX
CANNED SUFFIX CANNED SUFFIX
CANNED SUFFIX ,or SMILEYS
SMILEYSSMILEYS
SMILEYS and press MENU/OK.
Entering Characters Using T9 Text Input
Entering Characters Using T9 Text InputEntering Characters Using T9 Text Input
Entering Characters Using T9 Text Input
T9 Text Input lets you enter text in your PCS Phone by pressing keys just once per letter. (To
select the T9 Word
T9 Word T9 Word
T9 Word mode when entering text, see “Selecting a Character Input Mode” on page
45).
T9 Text Input analyzes the letters you enter using an intuitive word database and creates a
suitable word. (The word may change as you type). If the word you want does not display after
you have entered all the letters, press Next 0 to scroll through additional word selections. To
accept a word and insert a space, press Space #.
If you make a mistake, press Back to erase a single character. Press and hold Back to delete an
entire entry.
Adding
Adding Adding
Adding a
a a
a Word to
Word to Word to
Word to the
the the
the T9 Database
T9 DatabaseT9 Database
T9 Database
If a word you want to enter does not display as an option when you are using T9 Text Input, you
can add it to the database.
To add a word to the database:
1.
Select the Alph
AlphAlph
Alphabet
abet abet
abet input mode.
2. Enter the word using multi-tap text entry. (See “Entering Characters by Tapping the
Keypad” on pages 46-47). Then press right softkey, highlight T9 Word
T9 Word T9 Word
T9 Word and press MENU/OK.
The word will appear as an option the next time you scroll through options during T9 Text
Input.
![](/img.php?id=366831&img=bg2f.png)
46
Entering
Entering Entering
Entering Characters by Tapping the Keypad
Characters by Tapping the KeypadCharacters by Tapping the Keypad
Characters by Tapping the Keypad
To enter characters by tapping the keypad, select the Alphabet
Alphabet Alphabet
Alphabet mode (see “Selecting a
Character Input Mode” on page 45). Press the corresponding key until the desired character
appears. By default, the first letter of a word is capitalized and following letters are lowercase.
Characters scroll in the following order:
English Sequence
Key
Upper Case Lower Case
1 . , @ 1 ? ! * # /
2 ABC2 abc2
3 DEF3 def3
4 GHI4 ghi4
5 JKL5 jkl5
6 MNO6 mno6
7 PQRS7 pqrs7
8 TUV8 tuv8
9 WXYZ9 wxyz9
0 0
# Space
* Unshifted One-character-shifted Caps Lock
In Spanish mode, characters scroll in the following order.
Spanish Sequence Key
Key
Upper Case Lower Case
1 . , @ 1 ¿ ? ¡ ! * # /
2 AÁBC2 aábc2
3 DEÉF3 deéf3
4 GHIÍ4 ghií4
5 JKL5 jkl5
6 MNÑOÓ6 mnñoó6
7 PQRS7 pqrs7
8 TUÚÜV8 tuúüv8
9 WXYZ9 wxyz9
0 0
# Space
* Unshifted One-character-shifted Caps Lock
See page 30 for changing Spanish entering mode.
After a character is entered, the cursor automatically advances to the next space after two
![](/img.php?id=366831&img=bg30.png)
47
seconds or when you enter a character not on the same key.
Using Smart Punctuation
Using Smart PunctuationUsing Smart Punctuation
Using Smart Punctuation
“Smart punctuation” is available while using in T9 mode. It’s a quick and easy way to type
email domains, possessive forms and contractions. When you press 1 ,
T9 displays a period.
However, as you continue to type, T9 determines the appropriate mark based on your word
database.
For example, to type “It’s Easy.”
Press 4 8 1 7 Space # 3 2 7 9 1 .
Tip:
Tip: Tip:
Tip: The beginning of the word after the space is changed to upper/lower case depending on the
entry field. You can change the shift by pressing Shift *.
Entering Numbers
Entering NumbersEntering Numbers
Entering Numbers,
, ,
, Symbols,
Symbols,Symbols,
Symbols,
Canned Suffix
Canned SuffixCanned Suffix
Canned Suffix and Smileys
and Smileys and Smileys
and Smileys
Entering NUMBER
Entering NUMBEREntering NUMBER
Entering NUMBER
To enter numbers, select the NUMBER
NUMBER NUMBER
NUMBER mode and press the appropriate key (see “Selecting a
Character Input Mode” on page 45).
1.
In a text entry field, press right soft key.
2.
Highlight NUMBER
NUMBER NUMBER
NUMBER and press MENU/OK.
3. Press the corresponding numeric key to enter the number.
Shortcut:
Shortcut:Shortcut:
Shortcut: Press and hold the corresponding numeric key to enter the number directly.
Entering SYMBOL
Entering SYMBOLEntering SYMBOL
Entering SYMBOL
To enter symbols, select the SYMBOL
SYMBOL SYMBOL
SYMBOL mode. (See “Selecting a Character Input Mode” on page
45).
1.
In a text entry field, press right soft key.
2.
Highlight SYMBOL
SYMBOLSYMBOL
SYMBOL and press MENU/OK.
3.
Highlight the line that includes your desired symbol.
4.
Press the corresponding key (1 ~ 0) with each symbol.
-or-
Highlight your desired symbol by using the Navigation key, and press MENU/OK.
![](/img.php?id=366831&img=bg31.png)
48
Symbol List
Symbol ListSymbol List
Symbol List
1
11
1
2
22
2
3
33
3
4
44
4
5
55
5
6
66
6
7
77
7
8
88
8
.
..
.
-
--
-
@
@@
@
?
??
?
!
!!
!
*
**
*
#
##
#
'
'''
(
((
(
)
))
)
“
““
“
:
: :
:
;
;;
;
" ^ `
``
`
<
<<
<
>
>>
>
+
++
+
/
/ /
/
$
$$
$
%
%%
%
&
&&
&
[
[[
[
]
]]
]
=
==
=
«
««
«
»
»»
»
_
__
_
|
||
|
~
~~
~
{
{{
{
}
}}
}
°
°°
°
¿
¿¿
¿
¡
¡¡
¡
¢
¢¢
¢
£
££
£
§
§§
§
Entering CANNED SUFFIX
Entering CANNED SUFFIXEntering CANNED SUFFIX
Entering CANNED SUFFIX
To enter canned suffix, select the CANNED SUFFIX
CANNED SUFFIXCANNED SUFFIX
CANNED SUFFIX mode (see “Selecting a Character Input
Mode” on page 45).
1. In a text entry field, press right soft key.
2. Highlight CANNED SUFFIX
CANNED SUFFIX CANNED SUFFIX
CANNED SUFFIX and press MENU/OK.
3. Highlight the line that includes your desired smiley.
4. Highlight your desired smiley by using the Navigation key and press MENU/OK.
Entering SMILEYS
Entering SMILEYSEntering SMILEYS
Entering SMILEYS
To enter smile picture, select the SMILEYS
SMILEYSSMILEYS
SMILEYS mode (see “Selecting a Character Input Mode” on
page 45).
1. In a text entry field, press right soft key.
2. Highlight SMILEYS
SMILEYS SMILEYS
SMILEYS and press MENU/OK.
3. Highlight the line that includes your desired smiley.
4. Press the corresponding key (1~4) with each smiley.
-or-
Highlight your desired smiley by using the Navigation key and press MENU/OK.
Adding a New Internal Phone Book Entry
Adding a New Internal Phone Book EntryAdding a New Internal Phone Book Entry
Adding a New Internal Phone Book Entry
Your PCS Phone can store up to 300 Internal Phone Book entries. Phone Book entries can store
up to a total of 500 phone numbers and the entry’s name can contain 16 characters.
To add a new entry:
1.
Press MENU/OK to access the main menu.
2.
Press MENU/OK to display the menu options.
3.
Highlight Save Phone
Save PhoneSave Phone
Save Phone#, and press MENU/OK.
4.
Highlight your desired label and press MENU/OK.
5.
Enter a name and press MENU/OK or OK (left softkey). Or you can also save the phone
number without a name by pressing MENU/OK from the name entry display, highlight Yes
Yes Yes
Yes
![](/img.php?id=366831&img=bg32.png)
49
and then press MENU/OK. If you have already stored entries in the Phone Book, you are
prompted to select the following entry mode.
New Name
New Name New Name
New Name to enter a name directly.
From Ph. Book
From Ph. Book From Ph. Book
From Ph. Book to select a name from Phone Book entry list.
6.
Press Save (left softkey).
-or-
1.
Press MENU/OK to access the main menu.
2.
Select Contacts
Contacts Contacts
Contacts and press MENU/OK.
3.
Select Add New Entry
Add New EntryAdd New Entry
Add New Entry and press MENU/OK.
4.
Enter a name and press MENU/OK or OK (left softkey).
5.
Select the box under your desired label and press MENU/OK.
6.
Enter the number or address and press MENU/OK.
7.
Press Save (left softkey).
If you want to store the number without name, press MENU/OK or OK (left softkey)
before you enter the name during step 4 above and select Yes
YesYes
Yes .
After you have saved the number, the new Internal Phone Book entry is displayed. (See
“Internal Phone Book Entry Options” on page 44).
Finding Internal Phone Book Entries
Finding Internal Phone Book EntriesFinding Internal Phone Book Entries
Finding Internal Phone Book Entries
There are several ways to display your Internal Phone Book entries. Follow the steps outlined
in the sections below to display entries from the Internal Phone Book menu.
Finding Names
Finding NamesFinding Names
Finding Names
You can review all the entries stored in your Internal Phone Book or find an entry quickly by
following these simple steps:
1.
Press MENU/OK to access the main menu.
2.
Select Contacts
ContactsContacts
Contacts and press MENU/OK.
3.
Select Find Name
Find NameFind Name
Find Name and press MENU/OK.
Press the right Navigation key for the shortcut (steps 1 through 3).
4.
To select the entry, scroll through the list using your Navigation key.
5. Highlight your desired entry and press MENU/OK to locate a specific label.
Press Options (right softkey) for the menu options.
Finding Entries
Finding EntriesFinding Entries
Finding Entries
To find an Internal Phone Book entry by its entry first letters:
1.
Press the right Navigation key.
2.
Enter the first letter of the name or part of a name using multi-tap method.
3.
Highlight your desired entry by scrolling through the phone book entry and press
MENU/OK.
![](/img.php?id=366831&img=bg33.png)
50
If you enter a single letter, the display shows the list that begins with that letter.
-or-
1.
From the standby mode, enter 4 digits or more.
2.
Press MENU/OK.
3.
Highlight Find
Find Find
Find and press MENU/OK.
4.
The phone book entry list that includes the numbers that ends with the digits you entered
appears.
5.
Scroll through the list to select your desired entry.
6.
Press TALK or SPEAKER to make a call.
Finding Speed Dial Numbers
Finding Speed Dial NumbersFinding Speed Dial Numbers
Finding Speed Dial Numbers
To find phone numbers you have stored in speed dial locations:
1.
Press MENU/OK to access the main menu.
2.
Highlight Contacts
Contacts Contacts
Contacts and press MENU/OK.
3.
Highlight Favorites
Favorites Favorites
Favorites and press MENU/OK.
4.
Speed dial numbers list appears.
Finding Voice Dial Numbers
Finding Voice Dial NumbersFinding Voice Dial Numbers
Finding Voice Dial Numbers
To find phone numbers you have stored in Voice Dial:
1.
Press MENU/OK to access the main menu.
2.
Select Voice Service
Voice ServiceVoice Service
Voice Services
ss
s
and press MENU/OK.
3.
Select Voice Dial
Voice Dial Voice Dial
Voice Dial and press MENU/OK.
4.
Select Review
Review Review
Review or Review:Speaker
Review:Speaker Review:Speaker
Review:Speaker and press MENU/OK.
5.
Voice Dial number’s list appears.
Adding a Phone Number or Address to an Internal Phone Book Entry
Adding a Phone Number or Address to an Internal Phone Book EntryAdding a Phone Number or Address to an Internal Phone Book Entry
Adding a Phone Number or Address to an Internal Phone Book Entry
To add a phone number or address to an entry:
1.
Press MENU/OK to access the main menu.
2.
Select Contacts
ContactsContacts
Contacts and press MENU/OK.
3.
Select Find
Find Find
Find Entry
Entry Entry
Entry and press MENU/OK.
Press the right Navigation key for the shortcut (steps 1 through 3).
4.
Highlight the entry you wish to add phone numbers/email/web addresses and press
MENU/OK.
5.
Highlight a phone number and press Options(right softkey).
Then highlight Edit
Edit Edit
Edit and press MENU/OK.
-or-
Highlight an Email address or Web address, then press Edit (right softkey).
6. Highlight the box under the label you wish to add.
7. Enter the number or address and press MENU/OK.
8.
Press Save (left softkey).
![](/img.php?id=366831&img=bg34.png)
51
Editing an Internal Phone Book Entry
Editing an Internal Phone Book EntryEditing an Internal Phone Book Entry
Editing an Internal Phone Book Entry
To make changes to an entry:
1.
Display an Internal Phone Book entry.
2.
Highlight the entry you wish to edit and press MENU/OK.
3. Select the Phone number and press Options(right softkey).Then highlight Edit and
Press MENU/OK.
-or-
Highlight an Email address or Web address, then press Edit (right softkey).
4. Highlight the box under the following labels and edit by using the Number keys.
Name
Name Name
Name to change the entry’s name. Enter the new name. (See “Entering Characters by
Tapping the Keypad” on pages 46-47).
Home
Home Home
Home to change the entry’s phone number. Enter the new home phone number.
Work
Work Work
Work to change the entry’s phone number. Enter the new work phone number.
Mobile
Mobile Mobile
Mobile to change the entry’s phone number. Enter the new mobile phone number.
Pager
Pager Pager
Pager to change the entry’s pager number. Enter the new pager number.
Data
Data Data
Data to change the entry’s number for data. Enter the new data number.
Fax
Fax Fax
Fax to change the entry’s fax number. Enter the new fax number.
No Label
No Label No Label
No Label to change the entry’s number. Enter the new number.
Email
Email Email
Email to change the entry’s email address. Enter the new email address.
Web
Web Web
Web to change the entry’s web address. Enter the new web address.
Ringer
Ringer Ringer
Ringer to assign a ringer type to the entry. (See “Selecting a Ringer/Image Type for an
Entry” on page 52).
Image
ImageImage
Image
to assign an image type to the entry. (See “Selecting a Ringer/Image Type for an
Entry” on page 52).
5. Press Save (left softkey).
Tip:
Tip: Tip:
Tip: You can also store the phone number in the Pager, Data and Fax Category.
![](/img.php?id=366831&img=bg35.png)
52
Selecting a Ringer/
Selecting a Ringer/Selecting a Ringer/
Selecting a Ringer/Image
Image Image
Image Type for an Entry
Type for an EntryType for an Entry
Type for an Entry
You can assign a ringer/image type to an Internal Phone Book entry so you can identify the
caller by the ringer or image type.
To select a ringer type for an entry:
1.
Press right on the Navigation key.
2.
. .
. Select the entry you want to set the incoming ringer or image, and press MENU/OK.
3. Press Options (right softkey).
4. Highlight Edit
Edit Edit
Edit and press MENU/OK.
5. Select the menu under Ringer
Ringer Ringer
Ringer or Image
Image Image
Image by scrolling up or down and
press MENU/OK.
6. Highlight your desired ringer type or images and then press MENU/OK.
Get New:
Get New:Get New:
Get New: Start up a Browser and you can select an item to download.
Normal:
Normal:Normal:
Normal: Ringer
RingerRinger
Ringer equivalents to With Caller ID or Roaming setting (see page 19). Image
Image Image
Image
equivalents to Incoming Calls setting (see page 24).
None:
None:None:
None: the setting equivalent to off.
7. Press Save (left softkey).
To confirm the ringer, highlight Ringer and press Play(right softkey).
To see a display preview, press Preview (right softkey)during step 7 above. Then
press Sub LCD(right softkey) to see the Sub LCD preview.(You may also check the
Image through the external display). Use your Navigation key to adjust the position
of the image.
If you set an Animation Ringer and an Image, your PCS Phone plays the ringer of
Animation Ringer and displays the selected Image.
Secret Internal Phone Book Entries
Secret Internal Phone Book EntriesSecret Internal Phone Book Entries
Secret Internal Phone Book Entries
You can hide an entry’s phone number(s) and require your lock code to edit the entry by making
it secret. The entry name is still displayed, but the entry’s phone number is replaced by
“(Secret).”
To make an entry secret:
1.
Press right on the Navigation key.
2.
Scroll to the Internal Phone Book entry you want to tag Secret.
3.
Press Options (right softkey) to display the menu options.
4.
Highlight Set Secre
Set SecreSet Secre
Set Secret
tt
t and press MENU/OK.
5.
Enter 4 digits lock code.
6.
Select On
On On
On and press MENU/OK.
● To make an entry public, select Off
OffOff
Off during step 6 above.
Tip:
Tip: Tip:
Tip: If you can’t recall your lock code, try using the last four digits of either your Social Security
number or PCS Phone Number or try 0000.
![](/img.php?id=366831&img=bg36.png)
53
Dialing PCS Services
Dialing PCS ServicesDialing PCS Services
Dialing PCS Services
You must be in digital mode to access PCS Services.
To dial a service:
1.
Press MENU/OK to access the main menu.
2.
Select Contacts
Contacts Contacts
Contacts and press MENU/OK.
3.
Select Services
Services Services
Services and press MENU/OK.
4. Select Dir Assistance
Dir AssistanceDir Assistance
Dir Assistance, Account Inf
Account InfAccount Inf
Account Info
oo
o, or VoiceCommand
VoiceCommand VoiceCommand
VoiceCommand and press MENU/OK.
5.
Press TALK or SPEAKER.
-or-
Press MENU/OK, highlight Call
Call Call
Call or Call:
Call:Call:
Call: Speaker On
Speaker OnSpeaker On
Speaker On and press MENU/OK.
Storing Special Numbers in the Phone Book
Storing Special Numbers in the Phone BookStoring Special Numbers in the Phone Book
Storing Special Numbers in the Phone Book
Using the Pause Feature
Using the Pause FeatureUsing the Pause Feature
Using the Pause Feature
Generally, when you call an automated system like voicemail boxes or credit card companies,
you are required to enter a password or calling card number. Rather than entering the numbers
manually each time, you can store the numbers in your Internal Phone Book, separated by
special characters called “pauses”.
Using Two Different Types of Pauses
Using Two Different Types of PausesUsing Two Different Types of Pauses
Using Two Different Types of Pauses
There are two different types of pauses that you can use when storing a number in your
Internal Phone Book.
Hard
Hard Hard
Hard P
PP
Pauses
auses auses
auses cause the phone to stop dialing until you select Send Tone
Send Tone Send Tone
Send Tone or press TALK or
SPEAKER .To display Send Ton
Send TonSend Ton
Send Tone
ee
e, press MENU/OK, highlight Send Tone
Send Tone Send Tone
Send Tone and press
MENU/OK.
2
22
2-
--
-Sec
SecSec
Sec.
..
. Pause
Pause Pause
Pause waits two seconds before sending the next string of digits.
To insert pauses into a number:
1.
Enter the number you want to dial.
2.
Press MENU/OK to display the menu options.
3.
Highlight:
Hard Pause
Hard Pause Hard Pause
Hard Pause for a hard pause.
2
22
2-
--
-Sec
SecSec
Sec.
..
. Pause
Pause Pause
Pause for a timed pause.
Hyphen
Hyphen Hyphen
Hyphen for a hyphen (see following section).
4.
Press MENU/OK to insert a pause or manual hyphen.
5.
Finish entering the rest of the numbers, then dial or save the entered number. See
pages16-17 for saving.
![](/img.php?id=366831&img=bg37.png)
54
Using Hyphens
Using HyphensUsing Hyphens
Using Hyphens
You can add hyphens to your Internal Phone Book numbers, however they are mainly for show.
You can insert hyphens manually where you like, or choose automatic hyphenation, which
inserts hyphens according to the North American Numbering Plan. Entering a manual hyphen
suspends any automatic hyphenation for that number.
Using Different Dialing Methods
Using Different Dialing MethodsUsing Different Dialing Methods
Using Different Dialing Methods
Prepend Dialing
Prepend DialingPrepend Dialing
Prepend Dialing
Prepend dialing allows you to alter a phone number in your Phone Book by adding additional
numbers. For example, if your Internal Phone Book entry was entered without an area code
and you are out of town, you can prepend that entry with the appropriate area code.
1.
Highlight the phone number stored in Contacts entry using one of the previously described
methods.
2.
Press Options (right softkey) to display the menu options.
3.
Highlight Prepend
PrependPrepend
Prepend, and press MENU/OK.
4.
Enter the digits you wish to prepend.
5.
Press TALK or SPEAKER.
-or-
Press MENU/OK to display the menu options, then highlight Call
CallCall
Call
or
Call:Speaker On
Call:Speaker OnCall:Speaker On
Call:Speaker On and press MENU/OK.
Using Speed Dial
Using Speed DialUsing Speed Dial
Using Speed Dial
With this feature you can dial Internal Phone Book entries with one key press for locations 2-9.
Save your memory locations 2-9 for speed dialing or your most commonly used phone numbers.
Speed dial numbers must be stored in your Contacts to use this feature.
To store a speed dial number:
1.
Press right on the Navigation key.
2.
Highlight the Internal Phone Book entry, which want to set a speed dial number.
3. Press MENU/OK.
4.
Select the box under the phone number you want to set a speed dial.
5.
Press Options (right softkey) to display the menu options.
6.
Highlight Set Favorites
Set Favorites Set Favorites
Set Favorites and press MENU/OK.
7.
To select a corresponding speed dial number from 2-9, highlight an unassigned number and
press MENU/OK.
-or-
1.
Press MENU/OK to access the main menu.
2.
Select Contac
ContacContac
Contacts
ts ts
ts and press MENU/OK.
3.
Select Favorites
Favorites Favorites
Favorites and press MENU/OK.
![](/img.php?id=366831&img=bg38.png)
55
4.
To select a corresponding speed dial number from 2-9, highlight an unassigned number and
press MENU/OK.
5.
Highlight the entry from the list and press MENU/OK.
6.
Select the phone number you want to set a speed dial, and press MENU/OK.
To use speed dial:
1.
From the standby mode, press and hold the appropriate key that corresponds to the
memory location for approximately two seconds.
-or-
1.
From the standby mode, press the appropriate key, and then press TALK or SPEAKER .
The display confirms that the number has been dialed when it shows
“Connecting…”.
My PCS Phone Number
My PCS Phone NumberMy PCS Phone Number
My PCS Phone Number
To display your phone number:
1. Press MENU/OK to access the main menu..
2. Select Contacts
Contacts Contacts
Contacts and press MENU/OK.
3. Select My Phone#
My Phone#My Phone#
My Phone# and press MENU/OK.
![](/img.php?id=366831&img=bg39.png)
56
Personal Organizer
Personal OrganizerPersonal Organizer
Personal Organizer
Managing Schedules
Managing SchedulesManaging Schedules
Managing Schedules
Calendar
CalendarCalendar
Calendar
Use the Calendar to remind you of events or important calls you need to make. You can
schedule up to 100 events, 15 Call Alarms and 20 To-Do Items.
Setting the Time/Date
Setting the Time/DateSetting the Time/Date
Setting the Time/Date
In no service area or Analog service area, it’s necessary to set actual time and date to use
Calendar function. Set the current Time/Date by using numeric keys and/or the Navigation key
(right or left: move cursor,▲/▼: change value). To display the time setting display, press
MENU/OK, then highlight Calendar
Calendar Calendar
Calendar and press MENU/OK.
It's available from 12:00 AM, Jan 1, 2000 to 11:59 PM, Dec 31, 2099.
Setting Holidays
Setting HolidaysSetting Holidays
Setting Holidays
You can set your personal holidays by displaying the data in red on the Calendar display. The
default holidays displayed in red are Sundays and National holidays.
You can set holidays from Jan 1,2000 to Dec 31,2020.
1.Press MENU/OK to access the main menu.
2. Select Tools/Extras
Tools/ExtrasTools/Extras
Tools/Extras and press MENU/OK.
3.
Select C
CC
Calenda
alendaalenda
alendar
rr
r and press MENU/OK.
4. Highlight the day you want to set to the holiday by using the Navigation key.
(left : previous day, right : next day, up : previous week, down: next week).
5.
Press Options (right softkey).
6.
Highlight Set Date
Set Date Set Date
Set Date or Set Wee
Set WeeSet Wee
Set Weekly
kly kly
kly from the options, and press MENU/OK.
Options:
Set Date
Set Date Set Date
Set Date sets the selected date to the holiday.
Set Weekly
Set Weekly Set Weekly
Set Weekly sets the weekly holidays.
Reset Date
Reset Date Reset Date
Reset Date resets the holiday setting for the selected date.
Reset Weekly
Reset Weekly Reset Weekly
Reset Weekly resets the weekly holiday setting.
Reset All
Reset All Reset All
Reset All resets all the holiday settings and returns to the default settings.
7.
If you selected Set Weekly
Set WeeklySet Weekly
Set Weekly, Reset Weekly
Reset Weekly Reset Weekly
Reset Weekly or Reset All
Reset AllReset All
Reset All, you’ll be prompted to select Yes
Yes Yes
Yes or No
NoNo
No.
Tip:
Tip: Tip:
Tip: The current day is framed by a rectangle.
Adding an Event to the Scheduler
Adding an Event to the SchedulerAdding an Event to the Scheduler
Adding an Event to the Scheduler
Your Scheduler helps organize your time and reminds you of important events.
To add an event:
1.
Press MENU/OK to access the main menu.
2. Select Tools/Extras
Tools/ExtrasTools/Extras
Tools/Extras and press MENU/OK.
3. Select Calendar
Calendar Calendar
Calendar and press MENU/OK.
![](/img.php?id=366831&img=bg3a.png)
57
4.
Highlight the day you want to add an event to by using the Navigation key and press
MENU/OK.
5.
From the event list display, press Options (right softkey) to display the options.
6.
Highlight Add Event
Add EventAdd Event
Add Event and press MENU/OK.
7.
Highlight Schedule
Schedule Schedule
Schedule and press MENU/OK.
8.
Enter the description and press MENU/OK or press MENU/OK without entering the
description.
9.
Select the menu under the following event details, and press MENU/OK.
Description
Description Description
Description Entering a description of your event (up to 14 characters).
From
From From
From Scheduling the start time.
To
To To
To Scheduling the end time.
Location
Location Location
Location Editing the location of your event (up to 14 characters).
Alarm
Alarm Alarm
Alarm Select your desired setting from On
OnOn
On or Off
OffOff
Off.
Alarm Time
Alarm Time Alarm Time
Alarm Time Editing the alarm time (number of hours or minutes before the event starts).
Default alarm times are 10 minutes.
Repeat
Repeat Repeat
Repeat Repeating the event. Select None
NoneNone
None, Daily
DailyDaily
Daily, Weekly
WeeklyWeekly
Weekly, Monthly
MonthlyMonthly
Monthly, or Yearly
YearlyYearly
Yea rl y.
10.
Press Save (left softkey) to add the event.
Tip:
Tip: Tip:
Tip: Press the up/down navigation to scroll by week through the Scheduler calendar, and
the Side Volume key to scroll by month.
Event Alerts
Event AlertsEvent Alerts
Event Alerts
There are several ways your PCS Phone alerts you of scheduled events:
By playing the alert tone. (Depends on the setting Alert and Key Volume).
By blinking the LED.
By displaying event’s description on the Main LCD when the clamshell is open.
By displaying event’s description on the Sub LCD when the clamshell is closed.
By lighting backlight of LCD. (Depends on the setting Backlight).
Note:
Note: Note:
Note: Default alarm times are 10 minutes for Meetings, Events and dining Appointments, 24
hours for Special Occasions and zero minutes for Call Alarms.
![](/img.php?id=366831&img=bg3b.png)
58
Event Alert Menu
Event Alert MenuEvent Alert Menu
Event Alert Menu
When your phone is turned on and you have an event alarm scheduled, your phone alerts you
and displays the event summary.
1.
Press MENU/OK or View (left softkey) to silence the alarm and see the unchecked event list.
2. Highlight the unchecked event and press MENU/OK to see the event details, or
press Options for following options. To select an option, highlight it and press
MENU/OK .
Snooze
Snooze Snooze
Snooze to repeat the alarm in ten minutes.
Exit
Exit Exit
Exit to delete the event (even if it is a repeating event).
Note:
Note: Note:
Note: If you press Exit (right softkey) during step 1, you are prompted to confirm unchecked
event. Select Yes
YesYes
Yes to view and No
No No
No to cancel.
Editing a
Editing aEditing a
Editing an E
n En E
n Event
ventvent
vent
1.
From the event list display, highlight one of events, and press MENU/OK.
2.
The event details appear.
3.
Select the box under each item you want to edit, and press MENU/OK.
4.
Enter or select a new setting and press MENU/OK.
5.
Press Save (left softkey).
Adding a Call Alarm to the Scheduler
Adding a Call Alarm to the SchedulerAdding a Call Alarm to the Scheduler
Adding a Call Alarm to the Scheduler
To add a Call Alarm from the Scheduler:
1.
Press MENU/OK to access the main menu.
2. Select Tools/Extras
Tools/ExtrasTools/Extras
Tools/Extras and press MENU/OK.
3. Select Calendar
Calendar Calendar
Calendar and press MENU/OK.
4.
Highlight the day you want to add an event to by using the Navigation key and press
MENU/OK.
5.
From the event list display, press Options (right softkey) to display the options.
6.
Highlight Add Event
Add EventAdd Event
Add Event and press MENU/OK.
7.
Highlight Call Alarm
Call AlarmCall Alarm
Call Alarm and press MENU/OK.
8.
Enter the phone number directly or press Options (right softkey) for options.
From
From From
From Ph
PhPh
Ph. Book
. Book. Book
. Book
select the number from your desired phone book entry.
Voicemail
Voicemail Voicemail
Voicemail select the number for voicemail access.
9.
Then select the box under the following items and press MENU/OK.
Time/Date
Time/Date Time/Date
Time/Date Editing the start time/date.
Repeat
Repeat Repeat
Repeat Repeating the Call Alarm. Select None
NoneNone
None, D
DD
Daily
ailyaily
aily, Weekly
WeeklyWeekly
Weekly, Monthly
Monthly Monthly
Monthly or Yearly
YearlyYearly
Yea rl y.
10.
Press Save (left softkey).
![](/img.php?id=366831&img=bg3c.png)
59
Call Alarm
Call Alarm Call Alarm
Call Alarm Alerts
AlertsAlerts
Alerts
There are several ways your PCS Phone alerts you of scheduled call alarm:
By playing the alert tone. (Depends on the setting Alert and Key Volume).
By blinking the LED.
By displaying name or phone number on the Main LCD when the clamshell is open.
By displaying name or phone number on the Sub LCD when the clamshell is closed.
By lighting backlight of LCD. (Depends on the setting Backlight).
Call Alarm
Call AlarmCall Alarm
Call Alarm Menu
Menu Menu
Menu
When your phone is turned on and you have scheduled a call alarm, your phone alerts you and
displays the following options. To select an option, highlight it and press MENU/OK.
1.
Press MENU/OK or View (left softkey) to see the call alarm details.
2.
Highlight the unchecked event and press to see the call alarm details.
3.
Press Options (right softkey) to display the options.
4.
Highlight an option and press MENU/OK.
Call
Call Call
Call to dial the scheduled phone number.
Call: Speaker On
Call: Speaker On Call: Speaker On
Call: Speaker On to dial the phone number in speakerphone mode.
Sno
SnoSno
Snooze
oze oze
oze to repeat the alarm in ten minutes.
Save Phone#
Save Phone# Save Phone#
Save Phone# to save the scheduled phone number if it is not already in your Internal
Contacts or if the caller’s phone number has already been stored in the any Phone Book
entry, Alternate
Alternate Alternate
Alternate appears instead of Save Pho
Save PhoSave Pho
Save Phone
nene
ne#
##
#.
Erase
Erase Erase
Erase to delete the call alarm (even if it is a repeating event).
Note:
Note: Note:
Note: If you press Exit (right softkey) during step 1, you are prompted to confirm
unchecked event. Select Yes
YesYes
Yes to view and No
No No
No to cancel.
Editing Call Alarms
Editing Call Alarms Editing Call Alarms
Editing Call Alarms
To change a Call Alarm:
1.
From the Event list display, highlight one of call alarms, and press MENU/OK.
2.
The call alarm details appear.
3.
Select the box under each item you want to edit and press MENU/OK.
4.
Enter or select a new setting and press MENU/OK.
5.
Press Save (left softkey).
![](/img.php?id=366831&img=bg3d.png)
60
Erasing a Day’s Events or Call Alarms
Erasing a Day’s Events or Call AlarmsErasing a Day’s Events or Call Alarms
Erasing a Day’s Events or Call Alarms
To erase a scheduled day’s events:
1.
From the Event list display, highlight one of event or call alarms, and press MENU/OK.
2.
The Event details appear and press Options (right softkey).
3.
Highlight Eras
ErasEras
Erase
e e
e and press MENU/OK.
4.
Select Yes
Yes Yes
Yes and press MENU/OK.
Going to Today’s Scheduler Menu
Going to Today’s Scheduler MenuGoing to Today’s Scheduler Menu
Going to Today’s Scheduler Menu
If you are viewing the Scheduler menu and wish to go to the Scheduler menu for today’s date:
To view your scheduled events and Call Alarms:
1.
From the standby mode, press MENU/OK.
2. Select Tools/Extras
Tools/ExtrasTools/Extras
Tools/Extras and press MENU/OK.
3.
Highlight Calendar
Calendar Calendar
Calendar and press MENU/OK.
Press ▲ on the Navigation key for the shortcut (steps 1 and 2).
4.
Then, a “ ” is displayed next to the date if an event or call alarms is scheduled.
5.
To view an individual day, highlight the day by using the Navigation key (left: previous day,
right: next day, up: previous week, down: next week) and press MENU/OK.
6.
Highlight one of the events or call alarms from the list, and press MENU/OK. The details
display appears.
To view a future/past day’s scheduled Events, follow these steps:
1.
From the Event list display, press Options (right softkey).
2.
Highlight Go To Date
Go To Date Go To Date
Go To Date and press MENU/OK.
3.
Enter the date by using numeric keys and the Navigation key and press MENU/OK
OK (left softkey).
4.
Press MENU/OK again to view the day’s Event List.
Adding To Do Item
Adding To Do ItemAdding To Do Item
Adding To Do Items
ss
s
Your phone can store and manage 20 To Do items.
To add an entry to your To Do List:
1.
From the Event list display, press Options (right softkey).
2.
Highlight To Do List
To Do ListTo Do List
To Do List and press MENU/OK.
3.
From To Do List display, press Options (right softkey).
4.
Highlight Add Item
Add ItemAdd Item
Add Item and press MENU/OK.
5.
Highlight Description
Description Description
Description or Priority
Priority Priority
Priority and press MENU/OK.
Description
Description Description
Description Entering a description of the To-Do (up to 14 characters).
Priority
Priority Priority
Priority Editing the To-Do’s priority. You can select from Normal
NormalNormal
Normal, !Urgent
!Urgent !Urgent
!Urgent or √Done
DoneDone
Done.
6. Press Save (left softkey).
![](/img.php?id=366831&img=bg3e.png)
61
Viewing To Do List
Viewing To Do ListViewing To Do List
Viewing To Do List
To view your To Do List:
1.
From Event list display, press Options (right softkey).
2.
Highlight To Do List
To Do List To Do List
To Do List and press MENU/OK.
To see the details of each To Do item, select an item and press MENU/OK.
Editing To Do Items
Editing To Do ItemsEditing To Do Items
Editing To Do Items
To edit your To Do item:
1. From the To Do list display, highlight the item you want to edit and
press MENU/OK.
2. Edit description or change the priority and press Save(right softkey).
Adding To Do Item to Schedule
Adding To Do Item to ScheduleAdding To Do Item to Schedule
Adding To Do Item to Schedule
To add your To Do item to schedule:
1. From the To Do List display, highlight the item you want to add to schedule and
press Options (right softkey).
2. Highlight Add to Schedule
Add to Schedule Add to Schedule
Add to Schedule and press
MENU/OK.
3. Enter the description using your keypad and press MENU/OK.
4. Press Save(right softkey).
Add To Schedule
Add To Schedule Add To Schedule
Add To Schedule extracts the item from the To-Do list and makes it a scheduled event.
Deleting Items from the To Do List
Deleting Items from the To Do ListDeleting Items from the To Do List
Deleting Items from the To Do List
1. From To Do List display, highlight the item you want to erase and press Options (right
softkey).
2. Highlight your Erase Item
Erase ItemErase Item
Erase Item, Erase Selections
Erase Selections Erase Selections
Erase Selections or Erase All
Erase AllErase All
Erase All and press MENU/OK.
Erase Item
Erase Item Erase Item
Erase Item erases an item from the To Do List.
Erase Selection
Erase Selection Erase Selection
Erase Selection erases the selected To Do item at one time. Press MENU/OK to check the box
next to To Do Item and press Erase (left softkey) to erase. To check all boxes, press Options
(right softkey), then highlight Check All
Check All Check All
Check All and press MENU/OK.
Erase All
Erase All Erase All
Erase All erases the all To Do items.
3.
Highlight Yes
Yes Yes
Yes and press MENU/OK.
![](/img.php?id=366831&img=bg3f.png)
62
Viewing
Viewing Viewing
Viewing Event, Call Alarm or To Do List
Event, Call Alarm or To Do ListEvent, Call Alarm or To Do List
Event, Call Alarm or To Do List
To view their memory space and options:
1.
From Event List display, press Options (right softkey).
2. Highlight View Memory
View MemoryView Memory
View Memory and press MENU/OK.
3.
Highlight Schedule Event
Schedule EventSchedule Event
Schedule Event, Call Alarm
Call Alarm Call Alarm
Call Alarm or To Do List
To Do ListTo Do List
To Do List and press MENU/OK.
For further options,
4.
Press Options (right softkey).
5.
Highlight an option and press MENU/OK.
Options:
Erase Old
Erase Old Erase Old
Erase Old deletes the old events or call alarms.
Erase Selection
Erase Selection Erase Selection
Erase Selection deletes the To Do you selected (see “Deleting Item from the To Do List” on
page 61).
Erase Done
Erase Done Erase Done
Erase Done deletes the To Do that is done.
Erase All
Erase All Erase All
Erase All deletes the all events, Call Alarms or To Do items.
6.
Highlight Yes
Yes Yes
Yes or No
NoNo
No, and press MENU/OK.
Purging All Events, Call Alarms or To Do List
Purging All Events, Call Alarms or To Do ListPurging All Events, Call Alarms or To Do List
Purging All Events, Call Alarms or To Do List
To delete all scheduled events, call alarms or To Do List:
1.
From Event list display, press Options (right softkey).
2.
Highlight Er
ErEr
Erase Memory
ase Memory ase Memory
ase Memory and press MENU/OK.
3.
Highlight one item from the Options and press MENU/OK.
Options:
Erase Old
Erase Old Erase Old
Erase Old deletes the old events, Call Alarms or completed To Do items.
Erase All
Erase All Erase All
Erase All deletes the all events, Call Alarms or To Do items.
4.
Highlight Yes
Yes Yes
Yes or N
NN
No
oo
o, and press MENU/OK.
Displaying User Address
Displaying User AddressDisplaying User Address
Displaying User Address
Display the current user address you have signed in:
1.
Press MENU/OK to access the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3.
Select Phone Inf
Phone InfPhone Inf
Phone Info
oo
o and press MENU/OK.
4. Select Phone#
Phone#Phone#
Phone# UserID
UserID UserID
UserID and press MENU/OK.
If you sign out, “Vision Disabled” appears on the display.
Your phone number also appears on the display.
![](/img.php?id=366831&img=bg40.png)
63
Getting to know Icon Indication
Getting to know Icon IndicationGetting to know Icon Indication
Getting to know Icon Indication
You can see the explanation of icons that appear on the display.
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Phone Info
Phone InfoPhone Info
Phone Info and press MENU/OK.
4. Select Help
HelpHelp
Help and press MENU/OK.
5. Select the item you want to see the explanation and press MENU/OK.
6. The icons explanation appears and scrolls down automatically.
7. Press Done (left softkey) or END/ to end.
Use the up/down Navigation key to scroll the message manually.
Displaying the Version Information
Displaying the Version InformationDisplaying the Version Information
Displaying the Version Information
Display the version number of the software, hardware, PRL (Preferred Roaming List), PRI
(Product Release Instructions), etc. Installed on your PCS Phone.
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Settings
SettingsSettings
Settings and press MENU/OK.
3. Select Phone Info
Phone InfoPhone Info
Phone Info and press MENU/OK.
4. Select Version
VersionVersion
Version and press MENU/OK.
Using your phone
Using your phoneUsing your phone
Using your phone’
’’’s Tools
s Toolss Tools
s Tools
In addition to features designed to help make you more efficient and organized, your
new PCS phone also offers for your entertainment and amusement.
Using the Calculator
Using the CalculatorUsing the Calculator
Using the Calculator
Your phone comes with a built-in calculator function.
To use this feature, follow these easy steps:
1.
From the standby mode, press MENU/OK to display the main menu.
2.
Select Tools/Extras
Tools/ExtrasTools/Extras
Tools/Extras, and press MENU/OK.
3.
Select Calculator
CalculatorCalculator
Calculator, and press MENU/OK.
4.
Enter numbers using your keypad. Press . (left softkey)
to insert a decimal point.
5.
Press the appropriate Navigation key for an arithmetic option.
(up for addition, down for subtraction, left for multiplication, right for division)
6.
Enter numbers, and press MENU/OK for the result.
To clear the numbers, press CLR (right softkey).
To end calculation, press END/.
![](/img.php?id=366831&img=bg41.png)
64
Using the World Clock
Using the World ClockUsing the World Clock
Using the World Clock
This feature is available only in digital area.
1.
From the standby mode, press MENU/OK to display the main menu.
2.
Select Tools/Extras
Tools/ExtrasTools/Extras
Tools/Extras, and press MENU/OK.
3.
Select World Clock
World ClockWorld Clock
World Clock, and press MENU/OK.
4.
World Clock display appears.
Press right or left on the Navigation key for changing country.
Press Summer (left softkey)
or Standard (right softkey) for changing between summer and
standard time if applicable. “*” is shown in the summer time.
![](/img.php?id=366831&img=bg42.png)
65
Using Your Phone
Using Your PhoneUsing Your Phone
Using Your Phone’
’’’s Voice Services
s Voice Servicess Voice Services
s Voice Services
Using
UsingUsing
Using Voice
Voice Voice
Voice-
--
-Activated Dialing
Activated DialingActivated Dialing
Activated Dialing
You can use a Voice Dial tag to automatically dial a phone number in your Internal
Phone Book.
To use a Voice Dial tag to call a phone number:
1. From the standby mode, press TALK or SPEAKER shortly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag into your phone’s
microphone.
Note
NoteNote
Note: Record Voice Dial tags in a quiet environment and without the aid of an accessory (for
example, a headset or Hands-Free Car Kit).
Programming Voice Dial Tag to Your Phone
Programming Voice Dial Tag to Your PhoneProgramming Voice Dial Tag to Your Phone
Programming Voice Dial Tag to Your Phone
To program a voice dial tag:
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice
VoiceVoice
Voice
Service
ServiceService
Services
ss
s and press MENU/OK.
3. Select Voice Dial
Voice DialVoice Dial
Voice Dial and press MENU/OK.
4. Select Program
ProgramProgram
Program and press MENU/OK.
5. The phone will prompt you to say the name you want to program. Wait for the beep
and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the phone book entry list.
8. Press MENU/OK.
9. Select the labeled category that includes your desired phone number. Then display
shows “Voice Dial Recorded”.
Reviewing Voice Dialing Entries
Reviewing Voice Dialing EntriesReviewing Voice Dialing Entries
Reviewing Voice Dialing Entries
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Voice Dial
Voice DialVoice Dial
Voice Dial and press MENU/OK.
4. Select Revie
RevieRevie
Review
ww
w and press MENU/OK.
5. Highlight the desired entry and press MENU/OK.
-or-
Highlight the desired entry and press Options (right softkey). Highlight Play
PlayPlay
Play, and press
MENU/OK.
Highlight Erase
Erase Erase
Erase during step 5 above, and then select Yes
Yes Yes
Yes to erase voice dial tag.
![](/img.php?id=366831&img=bg43.png)
66
Erasing
Erasing Erasing
Erasing All
All All
All Voice Dialing
Voice Dialing Voice Dialing
Voice Dialing Tags
TagsTags
Tags
To erase all Voice Dialing tags:
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice Service
Voice ServiceVoice Service
Voice Service and press MENU/OK.
3. Select Voice Dial
Voice DialVoice Dial
Voice Dial and press MENU/OK.
4. Select Erase All
Erase AllErase All
Erase All and press MENU/OK.
5. Highlight Yes
YesYes
Yes and press MENU/OK.
Recording
Recording Recording
Recording Voice
Voice Voice
Voice Memos
MemosMemos
Memos
To record a memo in standby mode:
1. Press and hold Memo (right softkey). Starts recording after the beep.
-or-
1. From the standby mode press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Voice Memo
Voice MemoVoice Memo
Voice Memo and press MENU/OK.
4. Select Record
RecordRecord
Record and press MENU/OK.
5. Start recording after the beep.
To end the recording of your memo:
1. Wait for 18 seconds or press MENU/OK or BACK while recording.
-or-
1. Press END/ and disconnect the call while recording in Use State.
To record a conversation during a phone call:
1. Press MENU/OK to display the options.
2. Select Voice
Voice Voice
Voice Services
ServicesServices
Services and press MENU/OK.
3. Select Voice Memo
Voice MemoVoice Memo
Voice Memo and press MENU/OK.
4. Select Record
RecordRecord
Record and press MENU/OK.
5. Start recording after the beep.
To end the recording of your conversation:
1. Wait for 18 seconds or press MENU/OK BACK while recording.
-or-
1. Press END/ and disconnect the call while recording in Use State.
It also stops recording when the other party hangs up the call.
Recording Memo is disabled while you are in Analog Service area.
When the recording capacity is full, highlight old memo, and press Options (right softkey)
and select Eras
ErasEras
Erase
ee
e, and press MENU/OK.
Note:
Note: Note:
Note: Your phone can store a total of 4 memos for 18 seconds each.
![](/img.php?id=366831&img=bg44.png)
67
Voice
Voice Voice
Voice Memo Options
Memo OptionsMemo Options
Memo Options
To play the memos you have recorded:
1. From the standby mode press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Voice Memo
Voice MemoVoice Memo
Voice Memo and press MENU/OK.
Press Memo (right softkey) shortly for the shortcut step 1 to 3 above.
4. Select Play
PlayPlay
Play and press MENU/OK.
5. Highlight one memo from the list.
-or-
Highlight All
AllAll
All if you want to play all memos continuously.
6. Press MENU/OK.
You can change the speed of message playing by pressing Slow (left softkey) or Fast (right
softkey)
To play the newer/older memo, press left/right on the Navigation key.
Wait for ending or press MENU/OK to stop playing.
Press Options (right softkey), highlight Erase during step 5 above, and then select Yes
Yes Yes
Yes to
erase your desired one memo.
Tip
TipTip
Tip: Voice Memo is stored with the date and time stamp in reverse chronological order except
when it’s recorded in no service area.
Erasing
Erasing Erasing
Erasing Voice
Voice Voice
Voice Memos
MemosMemos
Memos
To erase all Voice Memo:
1. From the standby mode press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Voice Memo
Voice MemoVoice Memo
Voice Memo and press MENU/OK.
4. Select Play
PlayPlay
Play and press MENU/OK.
5. Display the memo list, highlight All
AllAll
All and press Options (right softkey).
6. Highlight Erase All
Erase AllErase All
Erase All and press MENU/OK.
7. Highlight Yes
YesYes
Yes and press MENU/OK.
-or-
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Voice Memo
Voice MemoVoice Memo
Voice Memo and press MENU/OK.
4. Select Erase All
Erase AllErase All
Erase All and press MENU/OK.
5. Highlight Yes
YesYes
Yes and press MENU/OK.
![](/img.php?id=366831&img=bg45.png)
68
Setting Up Screen Call
Setting Up Screen CallSetting Up Screen Call
Setting Up Screen Call
This feature enables you to answer incoming calls by using pre-recorded announcements, either
one that is pre-recorded or one that you record. You can also record the caller’s message into the
Voice Memo list (See “Using Your Phone’s Voice Services” on pages 65-67). You can decide
whether you answer the call immediately or not during the caller’s recording.
Activating Screen Call
Activating Screen CallActivating Screen Call
Activating Screen Call
To start Screen Call when you have incoming calls:
1. Press MENU/OK to display the options.
2. Highlight Screen Call
Screen CallScreen Call
Screen Call and press MENU/OK.
To set Auto Screen Call:
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Screen Call
Screen CallScreen Call
Screen Call and press MENU/OK.
4. Highlight Auto
AutoAuto
Auto and press MENU/OK.
5. Highlight On
OnOn
On and press MENU/OK.
If you want to change the answer time, enter your desired number (from 1 to 16
seconds) by using numeric keys or up/down on the Navigation key.
6. Press MENU/OK or OK (left softkey). Then the icon is displayed on the standby display.
Tip
TipTip
Tip: If new caller’s message is waiting, appears on the display. The memos recorded while
activating “Screen Call” are shown with “√” or “!” icon in the list. (“√”: once played, !: not
played yet)
Tip
TipTip
Tip: While the caller ’s recording:
Pressing END/ stops recording and disconnects the call.
Pressing TALK or SPEAKER answers call.
Selecting Announcement for Screen Call
Selecting Announcement for Screen CallSelecting Announcement for Screen Call
Selecting Announcement for Screen Call
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Screen Call
Screen CallScreen Call
Screen Call and press MENU/OK.
4. Highlight Announcement
AnnouncementAnnouncement
Announcement and press MENU/OK.
5. Depending on your preference, select Pre
PrePre
Pre-
--
-Recorded
Recorded Recorded
Recorded or Custom
CustomCustom
Custom.
6. Press MENU/OK.
Recording Name for Pre
Recording Name for PreRecording Name for Pre
Recording Name for Pre-
--
-Recorded Announcement
Recorded AnnouncementRecorded Announcement
Recorded Announcement
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Voice Services
Voice ServicesVoice Services
Voice Services and press MENU/OK.
3. Select Screen Call
Screen CallScreen Call
Screen Call and press MENU/OK.
4. Select Announcement
AnnouncementAnnouncement
Announcement and press MENU/OK.
![](/img.php?id=366831&img=bg46.png)
69
5. Select Pre
PrePre
Pre-
--
-Recorded
RecordedRecorded
Recorded press Options (right softkey).
6. Highlight Record Name
Record NameRecord Name
Record Name and press MENU/OK.
When your name has already been recorded, select Yes
YesYes
Yes or No
NoNo
No for overwriting.
7. Press MENU/OK to start 1st recording.
8. After the 1st recording, press MENU/OK to start the 2nd recording.
9. To stop recording, wait for 12 seconds or press MENU/OK.
Erasing the recorded name, select Erase Name
Erase NameErase Name
Erase Name during step 6 above.
Playing the pre-recorded announcement, select Play
PlayPlay
Play during step 6 above.
Recording Customized
Recording Customized Recording Customized
Recording Customized Announcement
AnnouncementAnnouncement
Announcement
1. Follow the step 1to 4 above.
2. Select Custom
CustomCustom
Custom and press Options (right softkey).
3. Highlight Record
RecordRecord
Record and press MENU/OK.
When your name has already been recorded, select Yes
YesYes
Yes or No
NoNo
No for overwriting.
4. Press MENU/OK to start 1st recording.
5. After the 1st recording, press MENU/OK again to start 2nd recording.
6. To stop recording, wait for 12 seconds or press MENU/OK.
Erasing the recorded announcement, select Erase
Erase Erase
Erase during step 3 above.
Playing the customized announcement, select Play
PlayPlay
Play during step 3 above.
![](/img.php?id=366831&img=bg47.png)
70
Using Voicemail
Using VoicemailUsing Voicemail
Using Voicemail
Setting Up Your Voicemail
Setting Up Your VoicemailSetting Up Your Voicemail
Setting Up Your Voicemail
All unanswered calls to your PCS Phone are automatically transferred to voicemail, even if
your phone is in use or turned off. Therefore, you will want to set up your PCS voicemail box
and personal greeting as soon as your PCS Phone is activated.
To set up voicemail:
1.
Press and hold 1 .
2.
Follow the system prompts to create your pass code, record your greeting, record your name
announcement and choose whether to activate One-Touch Message Access (a feature that lets
you press one key to access messages and bypasses the need for you to enter your pass code).
Note:
Note: Note:
Note: The voicemail setup process may vary in certain Affiliate areas.
Voicemail Notification
Voicemail NotificationVoicemail Notification
Voicemail Notification
There are several ways your PCS Phone alerts you:
By displaying a message on the Main LCD when the clamshell is open.
By displaying a message on the Sub LCD when the clamshell is closed.
By sounding the assigned ringer type.
By the LED blinking red.
By displaying at the top of the LCD.
New Voicemail Message Alerts
New Voicemail Message AlertsNew Voicemail Message Alerts
New Voicemail Message Alerts
When you receive a new voicemail message, your phone alerts you and prompts you to call your
voicemail, press TALK or SPEAKER. To call your Voicemail menu, press MENU/OK or OK
(left softkey).
Important
ImportantImportant
Important: When you are roaming off the Nationwide PCS Network, you may not receive
notification of new voicemail messages. It is recommended that you periodically check
your voicemail by dialing 1 + area code + your PCS Phone Number. When your voicemail
box answers, press * and enter your pass code. You will be charged roaming rates
when accessing voicemail while roaming off the Nationwide PCS Network.
Note:
Note:Note:
Note: Your phone accepts messages even when it is turned off. However, you are only notified of
new messages when your phone is turned on and you are in a PCS Service Area.
![](/img.php?id=366831&img=bg48.png)
71
Retrieving Your Voicemail Messages
Retrieving Your Voicemail MessagesRetrieving Your Voicemail Messages
Retrieving Your Voicemail Messages
You can review your messages directly from your PCS Phone or from any other touch-tone
phone. To dial from your PCS Phone, you can either speed dial your voicemail box or use
the menu keys.
Using One
Using OneUsing One
Using One-
--
-Touch Message Access:
Touch Message Access:Touch Message Access:
Touch Message Access:
Press and hold 1 . Follow the system prompts.
Using the Menu Keys on Your PCS Phone to Access your Messages:
Using the Menu Keys on Your PCS Phone to Access your Messages:Using the Menu Keys on Your PCS Phone to Access your Messages:
Using the Menu Keys on Your PCS Phone to Access your Messages:
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Message
MessageMessage
Message and press MENU/OK.
3. Select Voicemail
Voicemail Voicemail
Voicemail and press MENU/OK.
4. Highlight Call Voicemail
Call VoicemailCall Voicemail
Call Voicemail
or Call: Speaker On
Call: Speaker On Call: Speaker On
Call: Speaker On
and press MENU/OK.
Note
NoteNote
Note: You are charged for airtime minutes when you are accessing your voicemail from your
PCS Phone.
Using a Phone Other Th
Using a Phone Other ThUsing a Phone Other Th
Using a Phone Other Than Your PCS Phone to Access
an Your PCS Phone to Accessan Your PCS Phone to Access
an Your PCS Phone to Access
Your Messages:
Your Messages:Your Messages:
Your Messages:
1. Dial your PCS Phone Number.
2. When your voicemail answers, press * .
3. Enter your pass code.
Voicemail Options
Voicemail OptionsVoicemail Options
Voicemail Options
Your PCS Phone offers several options for organizing and accessing your voicemail.
Using Expert Mode
Using Expert ModeUsing Expert Mode
Using Expert Mode
Using the Expert mode setting for your personal voicemail box helps you navigate
Through the voice system more quickly by shortening the voice prompts you hear at
Each level.
To turn Expert mode on or off:
1.
Press and hold 1 to access your voicemail. If your voicemail box contains any new
or saved messages, press * to access the main voicemail menu.
2. Following the system prompts, press 3 to change your Personal Options.
3. Press 4 for expert mode.
4. Press 1 to turn Expert mode on or off.
Setting Up Gro
Setting Up GroSetting Up Gro
Setting Up Group Distribution Lists
up Distribution Listsup Distribution Lists
up Distribution Lists
Create up to 20 separate group lists, each with up to 20 customers.
1.
Press and hold 1 to access your voicemail.
2.
Following the system prompts, press 3 to change your Personal Options.
3.
Press 2 for Administrative Options.
4.
Press 5 for Group Distribution Lists.
5.
Follow the voice prompts to create, edit, rename or delete group lists.
![](/img.php?id=366831&img=bg49.png)
72
PCS Callback
PCS CallbackPCS Callback
PCS Callback
Return a call after listening to a message without disconnecting from voicemail.
1.
After listening to a message, press 8 .
2.
Enter the phone number.
3.
Once the call is complete, you’re returned to the voicemail main menu.
Voicemail
VoicemailVoicemail
Voicemail-
--
-to
toto
to-
--
-Voicemail Message
Voicemail MessageVoicemail Message
Voicemail Message
Record and send a voice message to other PCS Voicemail customers.
1.
From the main voicemail menu, press 2 to send a message.
2.
Follow the voice prompts to enter the phone number.
3.
Follow the voice prompts to record and send your voice message.
Voicemail
VoicemailVoicemail
Voicemail-
--
-to
toto
to-
--
-Voicemail Message Reply
Voicemail Message ReplyVoicemail Message Reply
Voicemail Message Reply
Reply to a voice message received from any other PCS Voicemail customer.
1.
After listening to a voice message, press 8 8 .
2.
Follow the voice prompts to record and send your reply.
Voicemail
VoicemailVoicemail
Voicemail-
--
-to
toto
to-
--
-Voicemail Message Forwarding
Voicemail Message ForwardingVoicemail Message Forwarding
Voicemail Message Forwarding
Forward a voice message, except those marked “Private,” to other PCS Voicemail customers.
1.
After listening to a message, press 4 .
2.
Follow the voice prompts to enter the phone number.
3.
Follow the voice prompts to record your introduction and forward the voice message.
Voicemail
VoicemailVoicemail
Voicemail-
--
-to
toto
to-
--
-Voicemail Receipt Request
Voicemail Receipt RequestVoicemail Receipt Request
Voicemail Receipt Request
Receive confirmation that your voice message has been listened to when you send, forward or
reply to a message to other PCS customers.
1.
After you have recorded a message, press 1 to indicate you are satisfied with the message
you recorded.
2.
Press 4 to mark receipt requested.
Continue Recording
Continue RecordingContinue Recording
Continue Recording
Before pressing to indicate you are satisfied with the message you recorded, press to
continue recording.
Extended Absence Greeting
Extended Absence GreetingExtended Absence Greeting
Extended Absence Greeting
When your phone is turned off or you are off the Nationwide PCS Network for an extended
period, this greeting can be played instead of your normal personal greeting.
1.
From the main voicemail menu, press 3 for Personal Options.
2.
Press 3 for Greetings.
3.
Press 3 to record an Extended Absence Greeting.
![](/img.php?id=366831&img=bg4a.png)
73
Clearing the Message
Clearing the Message Clearing the Message
Clearing the Message Icon
IconIcon
Icon
Your phone may temporarily continue to display the icon after you have checked your voice and
text messages.
To clear the icon from the display screen:
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Messaging
Messaging Messaging
Messaging and press MENU/OK.
3. Select Voicemail
Voicemail Voicemail
Voicemail and press MENU/OK.
4. Highlight Clear Count
Clear Count Clear Count
Clear Count and press MENU/OK.
5. Highlight Yes
Yes Yes
Yes and press MENU/OK.
Using Caller ID
Using Caller IDUsing Caller ID
Using Caller ID
Caller ID lets you know who’s calling by displaying the number of the person calling when your
phone rings. Similarly, if you call someone who has this feature, your phone number displays
on their phone. If the caller’s name and number are already stored in your Internal Phone Book,
the corresponding name appears with the number.
To block your phone number from being displayed for a specific outgoing call:
1.
Press * 6 7 .
2.
Enter the number you want to call.
3.
Press TALK or SPEAKER .
To permanently block your number, call Customer center.
Responding to Call Waiting
Responding to Call WaitingResponding to Call Waiting
Responding to Call Waiting
Call Waiting alerts you to incoming calls while you’re on a call by sounding beeps. The display
screen informs you that a call is coming in and shows the caller’s phone number (if it is
available and you are in digital mode).
To respond to an incoming call while you’re on a call:
Press TALK or SPEAKER (or press MENU/OK, highlight Flash
Flash Flash
Flash and press MENU/OK).
This puts the first caller on hold and answers the second call.
To switch back to the first caller, press TALK or SPEAKER (or press MENU/OK,
highlight Flash
Flash Flash
Flash and press MENU/OK) again.
Tip:
Tip: Tip:
Tip: For those calls where you don’t want to be interrupted, you can temporarily disable Call
Waiting by pressing before placing your call. Call Waiting is automatically reactivated
once you end the call.
![](/img.php?id=366831&img=bg4b.png)
74
Making a Three
Making a ThreeMaking a Three
Making a Three-
--
-Way Call
Way CallWay Call
Way Call
With Three-Way Calling, you can talk to two people at the same time. When using this feature,
the normal airtime rates will be charged for each of the two calls.
1.
Enter a number you wish to call and press TALK or SPEAKER.
2.
Once you have established the connection, press TALK or SPEAKER (or press MENU/OK,
highlight Three
ThreeThree
Three-
--
-Way Call
Way Call Way Call
Way Call and press MENU/OK) to put the first caller on hold.
3.
Dial the second number you wish to call.
4.
Press TALK or SPEAKER (or press MENU/OK, highlight Call
Call Call
Call or Call:
Call:Call:
Call: Speaker On
Speaker OnSpeaker On
Speaker On and
press MENU/OK).
5.
When you’re connected to the second party, press TALK or SPEAKER once more (or press
MENU/OK, highlight Flash
Flash Flash
Flash and press MENU/OK) to begin your three-way call.
If one of the people you called hangs up during your call, you and the remaining caller stay
connected. If you initiated the call and are the first to hang up, all three callers are
disconnected.
Tip:
Tip: Tip:
Tip: You can also select a phone number from Internal Phone Book, Call History or
Messages, etc. by pressing MENU/OK before you enter a phone number during step 3
above.
Note:
Note: Note:
Note: Call Waiting and Three-Way Calling may not be available while roaming off the
Nationwide PCS Network.
Using Call Forwarding
Using Call ForwardingUsing Call Forwarding
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when
your phone is turned off. You can continue to make calls from your phone with Call Forwarding
activated.
To
To To
To Activate Call Forwarding
Activate Call ForwardingActivate Call Forwarding
Activate Call Forwarding
1.
Press * 7 2 .
2.
Enter the area code and phone number to which your future calls should be forwarded.
3.
Press TALK or SPEAKER .You will hear a tone to confirm the activation of Call Forwarding.
To Deactivate Call Forwardin
To Deactivate Call ForwardinTo Deactivate Call Forwardin
To Deactivate Call Forwarding
gg
g
1.
1. 1.
1. Press * 7 2 0 .
2.
2. 2.
2. Press TALK or SPEAKER .You will hear a tone to confirm the deactivation.
Note:
Note: Note:
Note: You are charged a higher rate for calls you have forwarded.
![](/img.php?id=366831&img=bg4c.png)
75
Messages
MessagesMessages
Messages
These appear on your screen as Notifications
Notifications Notifications
Notifications and include numeric messages (pages),Messages,
Updates, and Mail.
New Messages
New MessagesNew Messages
New Messages
When you receive a new Message, your phone alerts you and press View (left softkey) to display
the message details.
Press Call (left softkey) to dial the phone number
Press Go (left softkey) to go to the web site.
Press Cancel (right softkey) to return to the message folder list.
Message Storage
Message StorageMessage Storage
Message Storage
Your PCS Phone can store up to 200 Messages. When the message memory is 90% full, a
warning message prompts you to erase messages to obtain additional memory space.
Displaying Messages
Displaying MessagesDisplaying Messages
Displaying Messages
To display a Message from the message notification alert, see “New Messages” on
page 75.
To display a Message from the main menu:
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Messag
MessagMessag
Messaging
inging
ing and press MENU/OK.
3. Select Notifications
NotificationsNotifications
Notifications and press MENU/OK. Then the folder list appears.
4. Highlight Unfiled
Unfiled Unfiled
Unfiled or your defined folder, and press MENU/OK.
5. Highlight the header of the message you want to see, and press MENU/OK.
An icon appears at the left side of each header of the message. The icons are as follows.
New message
Urgent message
Read message
Read Urgent message
If the sender’s information has already been stored in the phone book, the corresponding name
or phone number appears as the header of the message. If nothing has been stored, the phone
number or text that was included in the message appears as the header of the message.
To read other messages:
Press left on the Navigation key to read the previous message.
Press right on the Navigation key to read the next message.
![](/img.php?id=366831&img=bg4d.png)
76
Changing the Displaying Font Size of a Message
Changing the Displaying Font Size of a MessageChanging the Displaying Font Size of a Message
Changing the Displaying Font Size of a Message
After you display a Message, press MENU/OK to display message options.
To adjust the displaying font size:
1. Highlight Font Size
Font Size Font Size
Font Size by scrolling, and press MENU/OK.
2. Highlight your desired font size, and press MENU/OK.
Message Options
Message OptionsMessage Options
Message Options
After you display a Message, press MENU/OK to display message options. To select an option,
highlight it and press MENU/OK.
Call Back
Call Back Call Back
Call Back to dial the phone number of the sender (if applicable).
Call:Speaker On
Call:Speaker On Call:Speaker On
Call:Speaker On to dial the phone number of the sender with speakerphone mode
(if applicable)
Save Phone#
Save Phone# Save Phone#
Save Phone# to save the sender’s phone number if it is not already in your Internal Phone
Book (if applicable). Or if the sender’s phone number has already been stored in the any
Phone Book entry, Alternate
Alternate Alternate
Alternate appears instead of Save Phone
Save PhoneSave Phone
Save Phone#.
Prepend
Prepend Prepend
Prepend to add numbers to the beginning of the phone number (if applicable). (See
Prepending a Phone Number from a Message” on page 76).
Extract Info
Extract Info Extract Info
Extract Info to extract phone numbers, email or web addresses (if there are numbers or
addresses contained in the text message). (See pages 77-78).
Erase
Erase Erase
Erase to erase the message.
Add Folder
Add Folder Add Folder
Add Folder to add the folder. (See “Adding a Folder to the Messages” on
Page79).
Move Message
Move Message Move Message
Move Message to move the message into the other folder. (See “Moving a Message Into the
Other Folder” on page 79).
Font Size
Font Size Font Size
Font Size to adjust the font size depending on your preference. (See “Changing the
Displaying Font Size of a Message” on page 76).
Note:
Note: Note:
Note: If the incoming message does not have a call back number, “Call Back”, “Call:Speaker On
“,”Alternate/Save Phone#” and “Prepend” are not shown.
Prepending a Phone Number From a Message
Prepending a Phone Number From a MessagePrepending a Phone Number From a Message
Prepending a Phone Number From a Message
After you display a Message that contains call back number, press MENU/OK to display
message options.
If you happen to be outside your local area code and need to add a prefix to a phone number:
1. Highlight Prepend
Prepend Prepend
Prepend and press MENU/OK.
2. Enter the digits or pauses (see below) you want to add to the number. If you want to save
the number, press MENU/OK and select the Save Phone#
Save Phone#Save Phone#
Save Phone# option. If not, the changes only
apply to the current call.
![](/img.php?id=366831&img=bg4e.png)
77
3. To select an option, highlight it and press MENU/OK.
Call
Call Call
Call to dial the phone number.
Call: Speaker On
Call: Speaker On Call: Speaker On
Call: Speaker On to dial the scheduled phone number with speakerphone mode.
Save
Save Save
Save Phone#
Phone# Phone#
Phone# to store the phone number in your Internal Phone Book.
Hard Pause
Hard Pause Hard Pause
Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With
Pauses” on page 17).
2
22
2-
--
-Second Pause
Second Pause Second Pause
Second Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers With
Pauses” on page 17).
Extracting
Extracting Extracting
Extracting Phone Numbers or
Phone Numbers or Phone Numbers or
Phone Numbers or Email/Web Address From a Message
Email/Web Address From a MessageEmail/Web Address From a Message
Email/Web Address From a Message
After you display a message, press MENU/OK to display message options.
To extract a phone number contained in the message:
1 Highlight Extract Info
Extract InfoExtract Info
Extract Info,
and press MENU/OK.
2 Highlight Phon
PhonPhon
Phone
ee
e#, Email Address
Email Address Email Address
Email Address or Web Address
Web AddressWeb Address
Web Address, and press MENU/OK. All the phone
numbers, email addresses or web addresses contained in the message are displayed. (If
there is no appropriate information to extract from the message, the numbers or addresses
are not displayed).
3 Highlight the number or address you want to extract.
4 Press MENU/OK to display the options.
5 To select an option, highlight it and press MENU/OK.
“Phone#” options:
“Phone#” options:“Phone#” options:
“Phone#” options:
Call
Call Call
Call to dial the phone number.
Call: Speaker On
Call: Speaker On Call: Speaker On
Call: Speaker On to dial the scheduled phone number with speakerphone mode.
Save Phone#
Save Phone# Save Phone#
Save Phone# to save the phone number if it is not already in your Internal Phone Book. Or
if the phone number has already stored in the Phone Book entry, Alternate
Alternate Alternate
Alternate appears
instead of Save Phone
Save PhoneSave Phone
Save Phone#.
Display Phone#
Display Phone# Display Phone#
Display Phone# to display the phone number.
Prepend
Prepend Prepend
Prepend to add numbers to the beginning of the phone number. (See “Prepending a Phone
Number From a Message” on pages 76-77.)
“Email Address” options:
“Email Address” options:“Email Address” options:
“Email Address” options:
Send PCS Mail
Send PCS Mail Send PCS Mail
Send PCS Mail to send email
Display Address
Display Address Display Address
Display Address to display the email or Web address.
Save Address
Save Address Save Address
Save Address to save the email address if it is not already in your Internal Phone Book. Or
if the email address is already stored in the Phone Book entry, Alternate
Alternate Alternate
Alternate appears instead of
Save Addres
Save AddresSave Addres
Save Address
ss
s.
“Web Address” options:
“Web Address” options:“Web Address” options:
“Web Address” options:
Visit Site
Visit Site Visit Site
Visit Site to visit the website (if applicable).
Displ
DisplDispl
Display Address
ay Address ay Address
ay Address to display the web address.
![](/img.php?id=366831&img=bg4f.png)
78
Save Address
Save Address Save Address
Save Address to save the web address if it is not already in your Internal Phone Book. Or if
the web address is already stored in the Phone Book entry, Alternate
Alternate Alternate
Alternate appears instead of
Save Address
Save AddressSave Address
Save Address.
Creating
Creating Creating
Creating F
FF
Folders for
olders for olders for
olders for Messages
MessagesMessages
Messages
You can create up to ten folders to store your Messages.
1. From the standby mode, press MENU/OK to display the main menu.
2. Select Messaging
MessagingMessaging
Messaging and press MENU/OK.
3. Select Notifications
NotificationsNotifications
Notifications and press MENU/OK. Then the folder list appears.
4. From the folder list display, press Options (right softkey).
5. Highlight Create Folder
Create Folder Create Folder
Create Folder and press MENU/OK.
6. Enter a folder name from 3 to 13 letters and press MENU/OK or OK (left softkey). See
“Selecting a Character Input Mode” on page 45.
Pressing Save (left softkey) allows you to save the folder name.
7. If you want the message to be filed into the folder automatically, select the menu under the
Auto Filing
Auto FilingAuto Filing
Auto Filing and press MENU/OK.
8. Highlight On
On On
On and press MENU/OK.
9. Select the box under the Keyword
Keyword Keyword
Keyword by scrolling down and press MENU/OK.
10. Enter a keyword from 3 to 14 letters and press MENU/OK or OK (left softkey).
11. Press Save (left softkey).
Note:
Note: Note:
Note: If 10 user-defined folders exist, “Create Folder” menu disappears.
If you want to add a set optional feature to the new folder:
1. From the step 7 above, scroll down to select menu under the other option and highlight it and
press MENU/OK.
Notify
Notify Notify
Notify to select displaying the notification to on or off when you have a message matching
the defined folder.
Envelop
EnvelopEnvelop
Envelope
ee
e Icon
Icon Icon
Icon to select displaying the envelope icon on or off when you have a message
matching the defined folder.
2.
After selecting the each setting, press Save (left softkey).
![](/img.php?id=366831&img=bg50.png)
79
Adding a Folder To the Message
Adding a Folder To the MessageAdding a Folder To the Message
Adding a Folder To the Message
When the message contains any word of 3 to 14 letters, you can classify the message to your
defined folder. If 10 user defined folder exist, “Add Folder” menu disappears.
1. After you display a message, press MENU/OK to display message options.
2. Highlight Add Folder
Add Folder Add Folder
Add Folder by scrolling and press MENU/OK.
3. Enter a folder name from 3 to 13 letters and press MENU/OK or OK (left softkey). See
“Selecting a Character Input Mode” on page 45.
4. If you want the message to be filed into the folder automatically, select the menu under the
Auto Filing
Auto Filing Auto Filing
Auto Filing and press MENU/OK.
5. Highlight On
On On
On and press MENU/OK.
6. Select the box under the Keyword
Keyword Keyword
Keyword by scrolling
down
and press MENU/OK.
7. Enter a keyword and press MENU/OK.
-or-
Go to Keyword Match
Keyword MatchKeyword Match
Keyword Match and press MENU/OK. Select a keyword from the Keyword Match list.
8. Press Save (left softkey).
If you want to set optional feature to the added folder:
1.
From the step 7 above, scroll down to select other menu options. Highlight the menu under
each item and press MENU/OK.
Notify
Notify Notify
Notify to select displaying the notification to on or off when you have a message matching
the defined folder.
Envelop
EnvelopEnvelop
Envelope
ee
e Icon
Icon Icon
Icon to select displaying the envelope icon to on or off when you have the
message matching the defined folder.
2.
After selecting the each setting, press Save (left softkey).
Moving a
Moving a Moving a
Moving a Message
MessageMessage
Message Into the Other Folder
Into the Other Folder Into the Other Folder
Into the Other Folder
After you display a Message, press MENU/OK to display message options. You need at least
one defined folder.
If you want to move the message into the other folder:
1. Highlight Move Message
Move Message Move Message
Move Message by scrolling and press MENU/OK.
2. Highlight your desired folder and press MENU/OK.
Editing Folders
Editing FoldersEditing Folders
Editing Folders
To edit a folder:
1. From the folder list display, highlight your desired folder except for Unfiled
UnfiledUnfiled
Unfiled.
2. Press Options (right softkey).
3. Highlight Edit Folder
Edit Folder Edit Folder
Edit Folder and press MENU/OK.
4. Select the box under the desired option to edit and press MENU/OK.
Folder Name
Folder Name Folder Name
Folder Name to edit the folder name.
![](/img.php?id=366831&img=bg51.png)
80
Auto
AutoAuto
Auto Filing
Filing Filing
Filing to set auto filing to on or off.
Keyword
Keyword Keyword
Keyword to change the folder’s keyword. Incoming messages are automatically filtered into
the folder if they contain the Keyword you enter.
Notif
NotifNotif
Notify
yy
y
to change the notification setting to on or off.
Envelop
EnvelopEnvelop
Envelope
ee
e Icon
Icon Icon
Icon to change the icon setting to on or off.
5. Enter or select your new name/setting.
6. Press MENU/OK or OK (left softkey).
7. Press Save (left softkey).
Erasing a Folder Including Messages
Erasing a Folder Including MessagesErasing a Folder Including Messages
Erasing a Folder Including Messages
1. From the folder list display, highlight the folder you want to erase.
2. Press Options (right softkey).
3. Highlight Erase Folder
Erase Folder Erase Folder
Erase Folder and press MENU/OK.
4. Highlight Yes
Yes Yes
Yes and press MENU/OK.
Note:
Note: Note:
Note: The messages within the folder are also erased. If the folder contains a new message, you
are prompted to select Erase
Erase Erase
Erase or Don’t Erase
Don’t EraseDon’t Erase
Don’t Erase.
Erasing All Messages
Erasing All MessagesErasing All Messages
Erasing All Messages
To erase all messages:
1. From the folder list display, press Options (right softkey) to display the menu options.
2. Highlight Erase All Msgs
Erase All Msgs Erase All Msgs
Erase All Msgs and press MENU/OK.
3. Highlight In This Folder
In This Folder In This Folder
In This Folder or In All Folders
In All Folders In All Folders
In All Folders and press MENU/OK.
4. Highlight Yes
Yes Yes
Yes and press MENU/OK.
To erase all messages already read:
1. From the folder list display, press Options (right softkey) to display the menu options.
2. Highlight Erase Old Msgs
Erase Old Msgs Erase Old Msgs
Erase Old Msgs and press MENU/OK.
3. Highlight In This Folder
In This Folder In This Folder
In This Folder or In All Folder
In All FolderIn All Folder
In All Folders
ss
s
and press MENU/OK.
4. Highlight Yes
Yes Yes
Yes and press MENU/OK.
Note:
Note: Note:
Note: If the folder contains a new message, you are prompted to select Erase
Erase Erase
Erase or Don’t Erase
Don’t EraseDon’t Erase
Don’t Erase.
Note:
Note: Note:
Note: To erase an individual message, see “Message Options” on 76.
![](/img.php?id=366831&img=bg52.png)
81
Safety
SafetySafety
Safety
Getting the Most Out of Your Reception
Getting the Most Out of Your ReceptionGetting the Most Out of Your Reception
Getting the Most Out of Your Reception
Keeping Tabs on Signal Strength
Keeping Tabs on Signal StrengthKeeping Tabs on Signal Strength
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal strength in your area. Your phone
informs you of the current strength by displaying a number of bars next to the signal strength icon.
The more bars displayed, the stronger the signal. If you’re inside a building, being near a window
may give you better reception.
Understanding Power Save Feature
Understanding Power Save FeatureUnderstanding Power Save Feature
Understanding Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it periodically rechecks service availability or you can
check it yourself by pressing any key. Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Oper
Understanding How Your Phone OperUnderstanding How Your Phone Oper
Understanding How Your Phone Operates
atesates
ates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and
transmits radio frequency (RF) signals. When you use your phone, the system handling your call
controls the power level. This power can range from 0.01 μwatts to 0.2 watts in digital mode.
Knowing Radio Frequency Safety
Knowing Radio Frequency SafetyKnowing Radio Frequency Safety
Knowing Radio Frequency Safety
The design of your Phone complies with updated NCRP standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards
Institute (ANSI) joined in updating ANSI’s 1982 standard for safety levels with respect to human exposure to RF
signals. More than120 scientists, engineers and physicians from universities, government health agencies and
industries developed this updated standard after reviewing the available body of research. In 1993, the Federal
Communications Commission (FCC) adopted this updated standard in a regulation. In August 1996, the FCC
adopted hybrid standard consisting of the existing ANSI/IEEE standard and the guidelines published by the
National Council of Radiation Protection and Measurements (NCRP).
Maintaining Your Phone’s Peak Performance
Maintaining Your Phone’s Peak PerformanceMaintaining Your Phone’s Peak Performance
Maintaining Your Phone’s Peak Performance
There are several simple guidelines to operating your phone properly and maintaining safe,
satisfactory service.
Hold the phone with the antenna up, fully-extended and over your shoulder.
Try not to hold, bend or twist the phone’s antenna.
Don’t use the phone if the antenna is damaged.
Speak directly into the mouthpiece.
Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet,
immediately turn the power off and remove the battery. If it’s inoperable, return it to a Store or
call Customer center for service.
Note
NoteNote
Note: For the best care of your phone, only authorized personnel should service your phone and accessories.
Faulty service may void the warranty.
![](/img.php?id=366831&img=bg53.png)
82
Maintaining Safe Use of and Access to Your Phone
Maintaining Safe Use of and Access to Your PhoneMaintaining Safe Use of and Access to Your Phone
Maintaining Safe Use of and Access to Your Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
Using Your Phone While Driv
Using Your Phone While DrivUsing Your Phone While Driv
Using Your Phone While Driving
inging
ing
Talking on the phone while driving (or operating the phone without a hands-free device) is
prohibited in some jurisdictions. Laws vary as to specific restrictions. Remember that safety always
comes first. When using your phone in the car:
Get to know your phone and its features, such as speed dial and redial.
When available, use a hands-free device.
Position your phone within easy reach.
Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions.
Do not take notes or look up phone numbers while driving.
Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into
traffic.
Do not engage in stressful or emotional conversations that may divert your attention from the road.
Dial 9 1 1 TALK to report serious emergencies. It’s free from your wireless phone.
Use your phone to help others in emergencies.
Call roadside assistance or a special non-emergency wireless number when necessary.
Tip
TipTip
Tip: Purchase an optional Hands-Free Car Kit.
Following Safety Guidelines
Following Safety GuidelinesFollowing Safety Guidelines
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special regulations in a given area.
Turn your phone off in areas where use is forbidden or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Using Your Phone Near Other Electronic DevicesUsing Your Phone Near Other Electronic Devices
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, RF
signals from wireless phones may affect inadequately shielded electronic equipment. RF signals may
affect improperly installed or inadequately shielded electronic operating and entertainment systems
in motor vehicles. Check with the manufacturer or its representative to determine if these systems
are adequately shielded from external RF signals. Also check with the manufacturer regarding any
equipment that has been added to your vehicle. Consult the manufacturer of any personal medical
devices, such as pacemakers and hearing aids, to determine if they are adequately shielded from
external RF signals.
Note
NoteNote
Note: Always turn off the phone in health care facilities and request permission before using the
phone near medical equipment.
Turning Off Your Phone Before Flying
Turning Off Your Phone Before FlyingTurning Off Your Phone Before Flying
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft
systems, the U.S. Federal Aviation Administration (FAA) regulations require you to have permission
from a crew member to use your phone while the plane is on the ground. To prevent any risk of
![](/img.php?id=366831&img=bg54.png)
83
interference, FCC regulations prohibit using your phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
Turning Off Your Phone in Dangerous AreasTurning Off Your Phone in Dangerous Areas
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your phone when in a blasting area or in other
areas with signs indicating that two-way radios should be turned off. Construction crews often use
remote-control RF devices to set off explosives. Turn off your phone when you’re in any area that has
a potentially explosive atmosphere.
Although it’s rare, your phone or its accessories could generate sparks. Sparks could cause an
explosion or a fire resulting in bodily injury or even death. These areas are often, but not always,
clearly marked. They include:
Fueling areas such as gas stations
Below deck on boats
Fuel or chemical transfer or storage facilities
Areas where the air contains chemicals or particles such as grain, dust or metal powders
Any other area where you would normally be advised to turn off your vehicle engine
Note
NoteNote
Note: Never transport or store flammable gas, liquid or explosives in the compartment of your vehicle that
contains your phone or accessories.
Restricting Children ’s Access to Your Phone
Restricting Children ’s Access to Your PhoneRestricting Children ’s Access to Your Phone
Restricting Children ’s Access to Your Phone
Your PCS Phone is not a toy. Children should not be allowed to play with it because they could hurt
themselves and others, damage the phone or make calls that increase your phone bill.
![](/img.php?id=366831&img=bg55.png)
84
Caring for the Battery
Caring for the BatteryCaring for the Battery
Caring for the Battery
Protecting Your Battery
Protecting Your BatteryProtecting Your Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s performance.
Use only PCS-approved batteries and desktop chargers. These chargers are designed to
maximize battery life. Using other batteries or chargers voids your warranty and may cause
damage.
In order to avoid damage, charge the battery only in temperatures that range from 32º F to 113º
F (0º C to 45º C).
Don’t use the battery charger in direct sunlight or in high humidity areas, such as the
bathroom.
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long period of time.
It’s best to replace the battery when it no longer provides acceptable performance. It can be
recharged hundreds of times before it needs replacing.
Don’t store the battery in high temperature areas for long periods of time. It’s best to follow
these storage rules:
Less than one month: 4º F to 140º F (-20º C to 60º C)
More than one month: 4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (LiIon) Batteries
Disposal of Lithium Ion (LiIon) BatteriesDisposal of Lithium Ion (LiIon) Batteries
Disposal of Lithium Ion (LiIon) Batteries
For safe disposal options of your LiIon batteries, contact your nearest PCS-authorized service center.
Special note
Special noteSpecial note
Special note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in
household or business trash may be prohibited.
Note
NoteNote
Note: For safety, do not handle a damaged or leaking LiIon battery.
![](/img.php?id=366831&img=bg56.png)
85
Acknowledging Special Precautions and the FCC Notice
Acknowledging Special Precautions and the FCC NoticeAcknowledging Special Precautions and the FCC Notice
Acknowledging Special Precautions and the FCC Notice
FCC Notice
FCC NoticeFCC Notice
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving equipment. The
FCC can require you to stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National
Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA02269, Attn: Publication Sales Division.
Note
NoteNote
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Cautions
CautionsCautions
Cautions
Any changes or modifications to your phone not expressly approved in this document could void your
warranty for this equipment and void your authority to operate this equipment. Only use approved
batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and
voids the phone warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid
dropping, hitting, bending or sitting on it.
Body
BodyBody
Body-
--
-Worn Operation
Worn OperationWorn Operation
Worn Operation
To maintain compliance with FCC RF exposure requirements, Body-worn operations are restricted
to belt-clips, holsters or similar accessories that have no metallic component in the assembly and
that provide at least xx cm separation between the device, including its antenna whether extended
or retracted, and the user’s body. Use of non-recommended accessories may violate FCC RF exposure
requirements.
For more information about RF exposure, please visit the FCC website at www.fcc.gov.
Specific Absorption Rate (SAR) for Wireless Phones
Specific Absorption Rate (SAR) for Wireless PhonesSpecific Absorption Rate (SAR) for Wireless Phones
Specific Absorption Rate (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a
user of a wireless handset. The SAR value of a phone is the result of an extensive testing, measuring
and calculation process. It does not represent how much RF the phone emits. All phone models are
86
tested at their highest value in strict laboratory settings. But when in operation, the SAR of a phone
can be substantially less that the level reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design and other factors. What is important
to remember is that each phone meets strict federal guidelines. Variations in SARs do not represent
a variation in safety.
All phones must meet the federal standard, which incorporates a substantial margin of safety. As
stated above, variations in SAR values between different model phones do not mean variations in
safety. SAR values at or below the federal standard of 1.6 W/kg are considered safe for use by the
public.
The highest reported SAR values of SCP-5500 are:
AMPS/CDMA modes (Part 22) - Head: xx W/kg; Body-worn: xx W/kg
PCS CDMA mode (Part 24) - Head: xx W/kg; Body-worn: xx W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines. FCC ID number:
XXXX. More information on the phone’s SAR can be found from the following FCC website:
http://www.fcc.gov/oet/fccid.