Schneider Electric Systems Canada ER450-XXF01 Remote Radio Data Modem User Manual ER Leaflet

Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) Remote Radio Data Modem ER Leaflet

Advertising Material

Download: Schneider Electric Systems Canada ER450-XXF01 Remote Radio Data Modem User Manual ER Leaflet
Mirror Download [FCC.gov]Schneider Electric Systems Canada ER450-XXF01 Remote Radio Data Modem User Manual ER Leaflet
Document ID340236
Application ID2UhYUVg4eNyUYsfDyM0Njg==
Document DescriptionAdvertising Material
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.41kB (92663 bits)
Date Submitted2003-07-15 00:00:00
Date Available2003-07-15 00:00:00
Creation Date2003-05-22 14:34:18
Producing SoftwareAcrobat Distiller 4.05 for Macintosh
Document Lastmod2003-05-22 14:35:22
Document TitleER Leaflet
Document CreatorQuarkXPress(tm) 4.11
Document Author: Thomae

Remote Data Radio - ER450
E Series
Features and Specifications
Trio DataCom’s ER450 is an advanced high speed digital data radio modem designed for the most complex and demanding
requirements in both Point-to-Point and Point-to-Multipoint (Multiple Address Radio) SCADA and telemetry applications.
The powerful and flexible ER450 is part of the high performance E Series data radio system products that includes the
EB450 Advanced Base / Repeater and the EH450 Hot Standby Base / Repeater stations.
Features
Radio and Modem
- Fully integrated radio, modem and data
multiplexer
- True 19,200 bps over-air data rates
(also 4800 and 9600 bps)
- Fast data turnaround
- Simplex, Half Duplex and Full Duplex
- Broad frequency range with fully synthesized
all digital radio design
- Full specification operation from -30° to + 60°C
(+70°C option)
- Compact, rugged diecast alloy housing
- Low power consumption with sleep mode
operation
- Insurance against obsolescence with field
upgradeable firmware in flash memory
- Multi-function LED Front Panel Status Display
- Digital orderwire option
Data Ports
- Two independent configurable data ports and
separate system port
- Compatible with most industry standard data
protocols. eg: MODBUS, DNP-3, IEC 870 etc.
- Selectable 300 -76.8 k bps asynchronous RS-232
interface
- Multistream™ simultaneous data streams allow
for multiple vendor devices/protocols to be
transported on the one radio network
- Flexible data stream routing providing optimum
radio channel efficiency
- Internal repeater operation - buffered store and
forward
- Unique integrated C/DSMA collision avoidance
technology permits simultaneous polling and
spontaneous alarm reporting operation in the
same system
Network Management Remote Diagnostic option
(In conjunction with TView+™ Software)
- Exceptional network management tools
- Over-the-air user configuration
- Transparent Operation - simultaneous with
user data
- Network wide operation from any radio terminal
Innovative and sophisticated
digital communications
designs product s and solutions
Remote Data Radio - ER450
E Series
Radio
Diagnostics (Optional)
Frequency Range: 330-520 MHz (various
sub-frequency bands available)
Network wide operation from any
remote terminal.
Frequency Splits: Various Tx/Rx
frequency splits - programmable
Non intrusive protocol - runs
simultaneously with the application.
Channel Selection: Dual synthesizer,
6.25 kHz channel step
Over-the-air re-configuration of user
parameters.
Channel Spacing: 12.5 or 25 kHz
Programmable exception reporting of
alarms.
Frequency Accuracy: ±1ppm (-30 to 60°C)
(-22 to 140°F) ambient,
Optional (-30 to 70°C) (-22 to 158°F)
Aging: <= 1ppm/annum
Connections
Configuration: All configuration via
Windows based software
User Data Ports: 2 x DB9 female ports
wired as DCE (modem)
Compliances:
ETSI
EN300113, EN301489
FCC
PART 15, PART 90
IC
RS119, ICES-001
ACA
AS4295-1995
System Port: RJ45 for diagnostic,
configuration and re-programming
Transmitter
Power: 2 pin locking, mating
connector supplied
Modulation: User configurable narrow band
digitally filtered binary GMSK or 4 level FSK
Tx Keyup Time: <1mS
Timeout Timer: Programmable 0-255
seconds
regulatory conditions. Performance data
indicates typical values related to the
LED Display: Multimode Indicators for
Pwr, Tx, Rx, Sync, TxD and RxD data
LEDs (for both port A and B)
Modem
Data Serial Port #1: RS232, DCE, 60076,800 bps asynchronous
Data Serial Port #2: RS232, DCE, 30038,400 bps asynchronous
PTT Control: Auto (Data) / RTS line (Port
A or B) / System Port Override
System Port: RS232, 19,200 bps
asynchronous
Receiver
Flow Control: Selectable hardware /
software / 3 wire interface
Selectivity: Better than 80 dB
RF Channel Data Rate:
4800/9600/19,200 bps Half / Full duplex*
Intermodulation: Better than 75 dB
Data Buffer: 16 kbyte of on-board RAM
Spurious Response: Better than 80 dB
Bit Error Rate:
< 1x10-6 @ -110 dBm (4800 bps)
< 1x10-6 @ -108 dBm (9600 bps)
< 1x10-6 @ -106 dBm (19,200 bps)
AFC Tracking: Digital receiver
frequency tracking
the performance and suitability of individual
responsibility of the buyer to confirm these
Antenna: N female bulkhead. Separate
N (Tx) and SMA (Rx) connectors for
full duplex.*
Tx Spurious: <= -37 dBm
Sensitivity: -118 dBm for 12 dB SINAD
versions in different countries. It is the
In-built Error Rate testing capabilities.
Operational Modes: Simplex, Half duplex
or Full duplex*
Tx Power: 0.1 - 5W (+37 dBm) ±1 dB
User configurable with over-temperature
and reverse power protection
Local regulatory conditions may determine
Storage of data error and channel
occupancy statistics.
Mute: Programmable digital mute
Collision Avoidance: Trio DataCom’s
unique supervisory channel C/DSMA
collision avoidance system
Multistream™: Trio DataCom unique
simultaneous delivery of multiple data
streams (protocols)
Data Turnaround Time: <10mS
Firmware: Field upgradeable Flash memory
General
Power Supply: 13.8 Vdc nominal
(10-16 Vdc)
Transmit Current: 750 mA nom. @ 1 W
1600 mA nom. @5 W
Receive Current: <125 mA nom
Sleep Mode
Hardware: External control, < 1 mA
Software: User configurable modes
Dimensions: Rugged Diecast Enclosure
170 x 150 x 42mm
6.7 x 5.9 x 1.65 inches
With Mounting Plate
190 x 150 x 47mm
7.5 x 5.9 x 1.85 inches
Mounting: Fitted Mounting Plate
Weight: 1.27 kg (2.8lbs.)
Options
ERFD450 Full Duplex Operation with
separate N (Tx) and SMA (Rx)
connectors
DUPLX450BR External Duplexer, Band
Reject (for single antenna operation)
EDOVM Digital Order Wire Voice Module
NEMA 4/R Stainless Steel Enclosure
(IP65, NEMA 4 rated)
TVIEW+™ Configuration, Network
Management and Diagnostic Windows
GUI Software
DIAGS/E Network Management and
Remote Diagnostics Facilities per
Radio Modem
Related Products
EB450 Base Station
EH450 Hot Standby Base Station
95MSR 6 and 9 Port Stream Router
Multiplexer
described unit.
Information subject to change without notice.
Copyright 2003 Trio DataCom Pty Ltd.
* With ERFD450 full duplex option plus external
duplexer for single antenna operation
All rights reserved. Issue 05/03
Head Office
41 Aster Avenue, Carrum Downs
Victoria, Australia 3201
Phone +613 9775 0505 Fax +613 9775 0606
sales@trio.com.au www.trio.com.au

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2003:05:22 14:34:18
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : Thomae
Title                           : ER Leaflet
Creator                         : QuarkXPress(tm) 4.11
Modify Date                     : 2003:05:22 14:35:22+10:00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NI8ER450-XXF01

Navigation menu