Download: | ![Schneider Electric 1021433 C-Bus Modular Transmitter User Manual Exhibit 8](/pdf.png) |
Mirror Download [FCC.gov] | ![Schneider Electric 1021433 C-Bus Modular Transmitter User Manual Exhibit 8](/pdf.png) |
Document ID | 1074985 |
Application ID | XGzKaEtsr+/s0n1dVdIwsQ== |
Document Description | Exhibit 8 |
Short Term Confidential | No |
Permanent Confidential | No |
Supercede | No |
Document Type | User Manual |
Display Format | Adobe Acrobat PDF - pdf |
Filesize | 10.81kB (135145 bits) |
Date Submitted | 2009-03-02 00:00:00 |
Date Available | 2009-03-02 00:00:00 |
Creation Date | 2009-01-30 14:18:14 |
Document Lastmod | 2009-03-02 11:41:51 |
Document Title | Exhibit 8 |
— lltilfififll.
Clipsal Australia Pty Ltd
January 29, 2009 ABN 27 007 573 629
A memes/oi Schneider Electric
CIS Engineering GA
12 Park Terrace. Eowden
South Australia 5007
T 461 B 8269 0511
Federal Communications Commission F +51 3 83401724
Office of Engineering and Technology Laboratory Division Contact us dipsaimwfeedback
7435 Oakland Mills Rd
Columbia MD 21046-1609
cllpsalxzom
Subject: Request For Limited Modular Approval — FCC lD:WZC1021433
Dear Application Examiner:
Clipsal Australia Pty Ltd is seeking FCC authorization for the Model 1021433 Transmitter Module
as a limited modular RF transmitter. The requirements of the FCC Public notice DA00—1407 are
addressed as follows:
1.
The Modular Transmitter must have its own RF shielding.
The Model 1021433 Transmitter Module was in compliance with FCC Part 15 Subpart C
(47CFR 15) Sections 15.203, 15.207, and 15.249 without any RF shielding.
The Modular Transmitter must have buffered modulation/data Inputs.
The Model 1021433 Transmitter Module has buffered modulated/data inputs.
The Modular Transmitter must have its own power supply regulation.
The Model 1021433 Transmitter Module requires a regulated power supply specified at 120
vac 1 1.0 %.
The Modular Transmitter must comply with the antenna requirement of Section
15.203 and 15.204c.
The antenna of the Model 1021433 Transmitter Module is a 0 dBi antenna mounted on the
printed circuit board and is not user replaceable.
The Module Transmitter must be test in a stand-alone configuration.
The Model 1021433 Transmitter Module was tested in the requested stand—alone
configuration.
The Module Transmitter must be labelled with its own FCC ID Number.
The Model 1021433 Transmitter Module will be labelled with its own FCC ID number. This
Model 1021433 Transmitter Module is only intended for use in products manufactured
and/or controlled by Clipsal Australia Pty Ltd. An appropriate FCC Label identifying the use
of a limited modular device will be affixed to the final product.
NAM/Na Rn zms ArflflJSl m
among a pa;
'ۤE'
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : No
Encryption : Standard V2.3 (128-bit)
User Access : Print, Print high-res
XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date : 2009:01:30 14:18:14+09:30
Modify Date : 2009:03:02 11:41:51-07:00
Metadata Date : 2009:03:02 11:41:51-07:00
Format : application/pdf
Document ID : uuid:9500f309-1657-4d98-9de1-3e2e9924ad8b
Instance ID : uuid:23f99f56-0eca-41b4-97f1-bb99a6e18dca
Page Count : 2
EXIF Metadata provided by EXIF.tools