VTech Telecommunications 80-6044-01 Cordless Telephone - Base User Manual

VTech Telecommunications Ltd Cordless Telephone - Base Users Manual

Users Manual

Download: VTech Telecommunications 80-6044-01 Cordless Telephone - Base User Manual
Mirror Download [FCC.gov]VTech Telecommunications 80-6044-01 Cordless Telephone - Base User Manual
Document ID727910
Application IDELJKXjvo/gFEG+mto09XzQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize127.65kB (1595660 bits)
Date Submitted2006-11-14 00:00:00
Date Available2006-11-14 00:00:00
Creation Date2006-04-18 17:46:29
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2006-07-24 14:43:07
Document TitleUsers Manual
Document CreatorAdobe InDesign CS2 (4.0)

Important ! Before using this
telephone, you must read Important
safety instructions on page 36 of
this manual.
NEED HELP?
This manual has all the feature operations and troubleshooting you need to install
and operate your new VTech telephone. Please take the time to review thoroughly
to ensure proper installation of this VTech innovative and feature rich product. You
can also visit our website at www.vtechphones.com for support, shopping, and
everything new at VTech.
In Canada, please visit www.vtechcanada.com.
VTech toll free 1(800)595-9511. In Canada, dial 1(800)267-7377
Table of contents
Installation
Parts checklist  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Choose a location  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Install handset battery  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Check dial mode   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  7
About caller ID information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  7
If you subscribe to DSL service  .  .  .  .  .  .  .  .  .  .  .  . 8
Settings
Handset layout   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  9
Telephone �����������
base layout   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
Set date and time  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
Set language   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
Set dial mode  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12
Set ring volume  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12
Set ring tone  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13
Reset to default settings   .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13
Basic Operation
Make, answer, and end calls  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Volume   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Speakerphone  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Mute .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Temporary tone dialing  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Call waiting   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Handset locator  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Advanced settings
Chart of characters  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16
Edit handset name   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17
Set key beeps tone  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17
Set low battery tone  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18
Set no coverage tone  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18
Set voicemail   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19
Change the PIN  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 20
Registration  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 21
De-registering a handset  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 22
Advanced operation
Phonebook  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 23
Store an entry in the phonebook  .  .  .  .  .  .  .  .  .  .  . 23
Search the phonebook  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 24
Dial a phonebook entry  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 24
Edit a phonebook entry  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 25
Delete a phonebook entry  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26
Delete entire phonebook  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26
Redial list  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 27
Store a redial number in the phonebook  .  .  .  .  .  .  . 27
Dial from the redial list   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 28
Delete an entry from the redial list   .  .  .  .  .  .  .  .  .  . 28
Delete entire redial list   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 29
Call log  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 30
Store an entry in the phonebook  .  .  .  .  .  .  .  .  .  .  . 30
Dial an entry in the call log  .  .  .  .  .  .  .  .  .  .  .  .  .  . 31
Delete an entry from the call log   .  .  .  .  .  .  .  .  .  .  . 31
Delete entire call log  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Intercom operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Internal call   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Transfer an external call  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 33
Conference call  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 33
www.vtechphones.com
Table of contents
Batteries  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Important safety instructions   .  .  .  .  .  .  .  .  .  .  .  .  .  . 36
Troubleshooting  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 37
Operating range  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 43
Maintenance .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 43
About cordless telephones   .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 44
Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 44
FCC, ACTA and IC regulations   .  .  .  .  .  .  .  .  .  .  .  .  . 45
Technical specifications  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 48
Index .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 49
www.vtechphones.com
Installation
Parts checklist:
1.
2.
3.
4.
5.
6.
Telephone base
Handset
Telephone line cord
Base power adaptor
Battery
User’s manual
Telephone base
Base power adaptor
Telephone line cord
www.vtechphones.com
Handset
Battery
User’s manual
Choose a location
Install the telephone base as shown below. Choose a central location within the home, away from
any electronic equipment and appliances such as personal computers, computer routers, television
sets, microwave ovens, and refrigerators.
Avoid excessive heat, cold, dust or moisture.
Plug the telephone line cord
into a telephone jack.
www.vtechphones.com
Basic operation
Plug power adapter into an
electrical outlet not controlled
by a wall switch.
Use only the
power cord
supplied with
this product.
If you need a
replacement,
call 1(800)2223111 in the U.S.
In Canada, call
1(866)288-4268.
Be sure to use an
electrical outlet
not controlled by
a wall switch.
Installation
Installation
Installation
Install handset battery
• Use only the
VTech battery
and AC power
adaptor supplied
with this
telephone.
• If the handset will
not be used for
a long period of
time, remove the
battery to prevent
possible leakage.
• Press tab and slide cover away from the battery compartment.
• Plug the battery connector securely into the jack inside the battery compartment according to the
color coded label.
• Insert battery in the center of the battery compartment.
• Press down on the wired side until the battery securely snaps into place.
• Neatly tuck the wires inside the battery compartment.
• Position the battery compartment cover and slide it towards the unit until it clicks into place.
• Put the handset in the telephone base to start charging the new battery for at least 16 hours.
You can keep battery charged by returning the handset to the telephone base after each use. When
the battery power is fully depleted, a full recharge takes about sixteen hours.
For further instruction on battery, refer to Batteries section.
CLICK
www.vtechphones.com
Installation
Installation
Check dial mode
If you have touch-tone service, the telephone is ready to use as soon as the battery is charged. If you
have pulse (rotary) service, the dial mode must be changed. Press TALK/FLASH and you should
hear a dial tone. If not, refer to the Setting dial mode section in Basic setting.
About caller ID information
Basic operation
The caller ID with call waiting features in this telephone let you see who is calling before you answer
the phone, even when you are on another call. These features require services provided by your
local telephone company.
Contact your telephone service provider if:
• you have both caller ID and call waiting, but as separate services (you may need combined
service),
• you have only caller ID service, or only call waiting service, or
• you do not subscribe to any caller ID or call waiting services but wish to try them now.
You can use this telephone with regular caller ID service, and you can use its other features without
subscribing to either caller ID or combined caller ID with call waiting service. There may be fees for
these services, and these services may not be available in all areas.
The caller ID features will work only if both you and the caller are in areas offering caller ID service,
and if both telephone companies use compatible equipment.
www.vtechphones.com
Installation
If you subscribe to DSL service
If there is interference during telephone conversations and/or your caller ID features are not functioning
properly, install a noise filter to the telephone line between the telephone base and the telephone
wall jack. Contact your DSL provider for a noise filter.
Telephone
line cord
Noise filter (For
DSL users)
To single telephone jack
(RJ11C)
www.vtechphones.com
Settings
Handset layout
CLEAR
(SPEAKERPHONE)
• Press to activate the handset
speakerphone.
• Press again to resume normal handset
use.
CID
• While on a call, press to increase the
volume.
• While the telephone is not in use, press
to display caller ID information.
• Press to scroll up menu or list when in
menu.
TALK/FLASH
• Press to make or answer a call or to dial
a number, then press TALK/FLASH to
call.
• During a call, press to put current call
on hold and receive an incoming call, if
you subscribe to call waiting service.
INTERCOM
• Press to initiate an interc om
conversation.
MENU/SELECT
• Press to display menu, or to confirm
selected item from menu.
Basic operation
Settings
• Press to backspace number or character
display on screen.
• Press to exit the current menu and go
back to the last menu.
• Press to mute or un-mute microphone
when in call.
• While on a call, press to decrease
the volume.
• While the telephone is not in use,
press to display phonebook list.
• Press to scroll down menu or list
when in menu or list.
REDIAL
• Press to display redial list.
OFF
• During a call, press to hang up.
• While using menus, press to cancel
an operation and exit without
making changes
www.vtechphones.com
Settings
Telephone base layout
FIND HANDSET
• Press to page the handset, enter registration
mode, and reset to default setting.
10
www.vtechphones.com
Settings
Set date and time
•
•
•
•
Year
2006
Date
1.01
Time
2:05a
Set language
At this menu, you can select the language used in all menus and screen
displays. Choices are English, French and Spanish.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display menu.
• Press
twice to reach Setup HS. Press MENU/SEL to confirm.
• Press
three times to reach Language. Press MENU/SEL to
confirm.
• Use
or
to choose your desired language. Current choice is marked
with a tick.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
www.vtechphones.com
• The time is
automatically
set and updated
with incoming
caller ID
information if
you have this
service.
• If you have
more than one
handset, setting
one handset’s
date and time
will automatically
update all other
handsets.
Language
Reset
English
French
Spanish
11
Basic operation
Settings
Make sure the handset is in idle mode.
Press MENU/SEL to display menu.
Press
twice to reach Date/Time, then press MENU/SEL to select.
Use the dial pad to set the last two digits of the year. Press MENU/SEL
when you are done setting the year.
• Use the dial pad to set the date. Press MENU/SEL when you are done
setting the date.
• Use the dial pad to set the time. Press
or
to select a.m. or p.m.
• Press MENU/SEL when you are done setting the time. The screen will
display Stored and you will hear a confirmation tone (if the Key beeps
setting is on).
Settings
Set dial mode
• If you have
pulse (rotary)
service, the
dial mode must
be changed.
The dial mode is preset to touch tone. If you’d like to change the setting to
pulse:
• Make sure the handset is idle (off).
• Press MENU/SEL to display menu.
• Press
three times to reach Setup BS, then press MENU/SEL to
select.
• Press
to select Dial mode and press MENU/SEL to select.
• Use
or
to select pulse or touch tone (DTMF).
• Press MENU/SEL to confirm your selection. The screen will display Stored
and you will hear a confirmation tone (if the Key beeps setting is on).
Set ring volume
This feature allows you to adjust the ringer volume. The menu includes options
for five different levels of volume. You will hear a sample of each ringer volume
as you scroll through the choices.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display menu.
• Press
twice to reach Setup HS. Press MENU/SEL to select.
• Press
to reach Ring volume, and press MENU/SEL to select.
• Use or to scroll through the choices. Current selection is marked with
a tick and a sample of ringer will be played.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
12
www.vtechphones.com
Dial mode
Voice mail
DTMF
Pulse
Ring volume
Tones
Stored
Settings
Set ring tone
Reset to default settings
You can reset the telephone to its original factory default settings. All
changes you have made will be lost. You can reset the handset and
telephone base settings in either the Setup HS or Setup BS menu.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display menu.
• Press
twice to reach Setup HS, or press
three times to reach
Setup BS. Press MENU/SEL.
• Press
twice to reach Reset, and press MENU/SEL.
• Press MENU/SEL to confirm. The screen will display Stored and
you will hear a confirmation tone (if the Key beeps setting is on).
www.vtechphones.com
Ring melody
Ring volume
Melody 1
Melody 2
Melody 3
Melody 4
• If you choose
to reset to the
default settings,
all entries in the
phonebook, call
log and redial list
will be deleted.
Reset
Reset ?
Stored
13
Basic operation
Settings
This feature allows you to customize the ringer. The menu includes options
for six ring tones (or melodies.) You will hear a sample of each ringer as
you scroll through the choices.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display menu.
• Press
twice to reach Setup HS. Press MENU/SEL.
• Press MENU/SEL to select Ring melody.
• Use or to scroll through the choices. Current selection is marked
with a tick and a sample of ringer will be played.
• Press MENU/SEL to confirm your selection. The screen will display
Stored and you will hear a confirmation tone (if the Key beeps setting
is on).
Basic operation
Make, answer, and end calls
• Not possible
is displayed
on screen if
one of the
other handsets
is already
engaged on a
call.
Not possible
• Press TALK/FLASH or , then dial the number.
-OR• Dial the number (use CLEAR to backspace and make corrections), then press TALK/FLASH or
to call.
• To answer a call, press TALK/FLASH, or , if you want to use speakerphone.
• Press OFF to end a call.
Volume
There are five levels of volume to choose from during call. Press �
or
to adjust the volume.
Phone 00:00:10
Speakerphone
• During a call, press
to toggle between handsfree speakerphone and the normal handset use.
Press OFF to hang up.
Mute
You can silence the microphone so that the caller cannot hear your
conversation with a third party, but you can still hear the caller.
• Press CLEAR during call to mute. MUTE is displayed on the screen.
• Press CLEAR again to un-mute and resume.
14
www.vtechphones.com
Phone 00:00:10
18005959511
MUTE
Basic operation
Temporary tone dialing
If you have pulse (rotary) service, you can change from pulse to touch tone dialing during a call by
pressing . This is useful if you need to send touch tone signals for access to telephone banking or
long distance services.
• Dial the number.
• Press .
• After you hang up, the telephone automatically returns to pulse dial service.
Basic operation
Settings
Basic
operation
Call waiting
• If you have call waiting service, press TALK/FLASH during call if you
have another incoming call. Press TALK/FLASH again to switch back
to the original call.
Handset locator
• Press the key on the telephone base to page the handset.
• Paging will display on the screen of all handsets.
• To cancel the page, press the key on the telephone base again, or, press
TALK/FLASH or OFF on handset, or place handset in the telephone
base.
www.vtechphones.com
Paging
15
Advanced settings
Chart of characters
Use the dial pad and the chart below to enter a name (up to 15 characters). Each press of a particular
key causes characters to be displayed in the following order:
Keys
Characters by number of key presses
1st
2nd
space
3rd
4th
5th
6th
7th
‘
8th
9th
•	�����������������������������
When editing characters, use CLEAR to backspace and delete. A long press of CLEAR will delete
the entire string.
• A long press of the 0 key will insert a dialing pause.
16
www.vtechphones.com
Advanced settings
Edit handset name
You can personalize the name of the handset and assign numbers to identify
different handsets (if you have more than one handset).
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
twice to reach Setup HS. Press MENU/SEL to select.
• Press
three times to reach Handset Name, and press MENU/SEL.
• Use the dial pad to enter characters. (See the chart on the previous
page.)
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
Handset name
Language
Name
Stored
Set key beeps tone
www.vtechphones.com
Advanced operation
The handset is preset to beep when any key is pressed. To change the
setting:
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
twice to reach Setup HS. Press MENU/SEL.
• Press
twice to reach Tones, and press MENU/SEL.
• Use
twice to reach Key beeps. Press MENU/SEL.
• Use
or
to select On or Off.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if you have set the Key beeps setting to on).
Tones
Handset name
Key beeps
17
Advanced settings
Set low battery tone
The handset is preset to beep when battery level is low. You have the option
to set it on or off.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
twice to reach Setup HS. Press MENU/SEL.
• Press
twice to reach Tones, and press MENU/SEL.
• Press MENU/SEL to select Battery low.
• Use
or
to choose On or Off.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
Set no coverage tone
The handset is able to beep when there is no coverage. It is preset at the
factory to off. If you’d like to change the setting:
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
twice to reach Setup HS, press MENU/SEL.
• Press
twice to reach Tones, press MENU/SEL.
• Press
to reach No coverage, press MENU/SEL.
• Use
or
to select between On or Off.
• Press MENU/SEL to confirm. The screen will display Stored and you will
hear a confirmation tone (if the Key beeps setting is on).
18
www.vtechphones.com
On
Off
Battery low
No coverage
Key beeps
Battery low
No coverage
Key beeps
On
Off
Advanced settings
Set voicemail
•
•
•
•
•
Make sure the handset is in idle mode.
Press MENU/SEL to display the menu.
Press
three times to reach Setup BS. Press MENU/SEL.
Press
twice to reach Voice mail, and press MENU/SEL.
The screen will display Voice mail off? Press MENU/SEL to turn it
off. Press OFF or CLEAR to exit this menu and keep it on.
Voice mail
Reset
Voice mail off?
• Press MENU/SEL to confirm. The screen will display Stored and
you will hear a confirmation tone (if the Key beeps setting is on).
Stored
Advanced operation
www.vtechphones.com
19
Advanced settings
Change the PIN
• Wrong PIN will
be displayed if
a wrong PIN is
entered.
Wrong PIN
A personal identification number (PIN) is required for registering and
deregistering of handsets. The factory preset PIN is 0000.
• Make sure the handset is in idle mode.
• Press MENU/SEL to display the menu.
• Press
three times to reach Setup BS. Press MENU/SEL.
• Press MENU/SEL to select Change PIN.
• Enter the current PIN (enter the preset PIN of 0000 if it is first time
PIN change). Press MENU/SEL.
• Enter your new PIN and press MENU/SEL.
Change PIN
Dial mode
Enter PIN
****
New PIN
• Repeat PIN is displayed. Enter your new PIN again and press
MENU/SEL to confirm.
• Press MENU/SEL to confirm. The screen will display Stored
and you will hear a confirmation tone (if the Key beeps setting
is on).
20
www.vtechphones.com
Repeat PIN
Advanced settings
Registration
When an additional handset is first powered up or the handset has been deregistered, Register! will display on the screen prompting you to register the
handset. Follow these steps to register a handset:
• Locate the handset beside the telephone base.
• Press FIND HANDSET on the telephone base for about 15 seconds.
• Press MENU/SEL to enter menu.
• Press ** # * ## to activate the registration menu.
• Press MENU/SEL to select Registration.
Register!
Registration
Register
Deregister
• Press MENU/SEL to select Register.
• Registered should display on the screen and you will hear a confirmation
tone (if the Key beeps setting is on).
Searching
Registered
www.vtechphones.com
• If a handset is
not registered,
it cannot make
or receive calls
or access the
call log. All other
menus and
features can still
be used.
21
Advanced operation
• Use the dial pad to enter PIN (factory preset PIN: 0000), and press MENU/
SEL to confirm, Searching is displayed on screen.
•	�����������������
If the telephone
base cannot
detect the
handset, or a
wrong PIN is
entered, No base
will be displayed.
Keep the handset
close to the
telephone base
and repeat the
above steps to
register again.
Advanced settings
De-registering a handset
Register
Deregister
• Press MENU/SEL to enter menu.
• Press ** # * ## to activate the registration menu.
Enter PIN
• Press MENU/SEL to select Registration.
• Press
to reach Deregister, and press MENU/SEL to confirm.
• Use the dial pad to enter the PIN (factory preset PIN: 0000), and press
MENU/SEL.
• All registered handset numbers are displayed. Use
and
to select
the handset you want to deregister, and press MENU/SEL.
• Deregister? is displayed. Press MENU/SEL.
• Stored is displayed and you will hear a confirmation tone (if Key beeps
setting is on).
Handset 1
Handset 2
22
Deregister?
www.vtechphones.com
Stored
Advanced operation
Phonebook
This telephone phonebook can store a maximum of 50 entries. The name
can be up to 12 characters and the number up to 20 digits.
• Phonebook menu can be entered in idle mode either by pressing the ,
or pressing MENU/SEL twice.
• Press CLEAR or OFF to quit the menu without saving the change.
• Empty is displayed on screen when there is no entry in the phonebook.
• Full is displayed on screen when the phonebook is full.
• It is permissible for duplicate entries to be stored in the phonebook, or for
the same number to be stored under two names.
Empty
Full
Store an entry in the phonebook
Press MENU/SEL to display menu.
Press MENU/SEL to select Phonebook.
Press MENU/SEL to enter Phonebook menu.
Press MENU/SEL to select New.
Use the dial pad to enter the telephone number and press MENU/SEL to
confirm.
• Use the dial pad to enter the name and press MENU/SEL to confirm.
• The screen will display Stored and you will hear a confirmation tone (if
the Key beeps setting is on).
043
Name
New
Select
Advanced operation
Advanced
operation
•
•
•
•
•
Number
Aha
www.vtechphones.com
23
Advanced operation
Search the phonebook
Entries are sorted alphabetically, and names beginning with numbers are presented in list first.
An alphabetical search can be done after entering the phonebook. Enter the first letter of the name
using the method entering characters (see chart on page 16). The first name beginning with that
letter will be displayed.
For example, press 5 (JKL) once to find Jenny, twice to find Kristen, or three times to find Linda.
Dial a phonebook entry
•   Press
to enter phonebook.
• Press
or
to scroll through the list until you see the entry you want
to dial.
• Press TALK/FLASH or
to dial.
Anna
Joyce
If you want to change the way the number will be dialed (for example with
or without an area code):
• Press MENU/SEL when you see the entry you want to dial.
• Press
to reach Select, and press MENU/SEL.
• Use CLEAR and dial pad to change the way the number will be dialed
(1 + area code + number, area code + number, 1 + number, number
only).
• Press TALK/FLASH or
to dial.
24
www.vtechphones.com
Select
Edit
Advanced operations
Edit a phonebook entry
• Press
• Press
to edit.
to enter phonebook.
or
to scroll through the list until you see the entry you want
Edit
Delete
• Press MENU/SEL to enter the phonebook menu.
• Press
twice to reach Edit, and press MENU/SEL.
18005959511
• Use CLEAR and the dial pad to edit the number. Press MENU/SEL.
• Use CLEAR and the dial pad to edit the name. Press MENU/SEL to
confirm.
Peter
Advanced operation
Advanced
operation
• The screen will display Stored, and you will hear a confirmation tone (if
Key beeps setting is on).
Stored
www.vtechphones.com
25
Advanced operation
Delete a phonebook entry
• Press
to enter phonebook.
• Press
or
to scroll through the list until you see the entry you
want to delete.
• Press MENU/SEL to enter the phonebook menu.
• Press
three times to reach Delete, and press MENU/SEL.
• Press MENU/SEL again when Delete? is displayed.
• The screen will display Deleted, and you will hear a confirmation
tone (if Key beeps setting is on).
Delete
Delete list
Delete?
Deleted
Delete list
Delete entire phonebook
• Press
to enter phonebook.
• Press MENU/SEL to enter the phonebook menu.
• Press
four times to reach Delete, and press MENU/SEL.
• Press MENU/SEL again when Delete list? is displayed.
• The screen will display Deleted, and you will hear a confirmation
tone (if Key beeps setting is on).
26
www.vtechphones.com
Delete list?
Deleted
Advanced operation
Redial list
This telephone’s redial list can store a maximum of ten most recent dialed
numbers. You can review, redial, or copy the number into your phonebook.
• When there are already ten numbers in the redial list, the oldest number
is deleted to make room for the new one.
• Press CLEAR or OFF to quit the menu without saving the change.
• Empty is displayed on the screen if there is no dialed number in the list.
• The name is displayed rather than the number if the number dialed is in
the phonebook.
• If a call dialed is already in the list, the new number will be added to the
list and the previous one deleted.
Store a redial number in the phonebook
Press REDIAL to enter redial list.
Use
or
to scroll through the list until the desired entry is displayed.
Press MENU/SEL to enter redial menu.
Press
to reach Store No., and press MENU/SEL.
18005959511
Peter
Store No.
Delete
Advanced operation
Advanced
operation
•
•
•
•
Empty
Name
• Use the dial pad to enter the name, and press MENU/SEL.
• The screen will display Stored, and you will hear a confirmation tone (if
Key beeps setting is on).
www.vtechphones.com
Peter
27
Advanced operation
Dial from the redial list
• Press REDIAL to enter redial list.
• Use
or
to scroll through the list until the desired entry is
displayed.
• Press TALK/FLASH, or
to dial.
If you want to change the way the number will be dialed (for example
with or without area code):
• Press MENU/SEL when you see the entry you want to dial.
• Press
to reach Select, and press MENU/SEL.
• Use CLEAR and dial pad to change the way the number will be
dialed (1 + area code + number, area code + number, 1 + number,
number only).
• Press TALK/FLASH or
to dial.
18005959511
Peter
Select
Store No.
Delete
Delete list
Delete an entry from the redial list
• Press REDIAL to enter redial list.
• Use
or
to scroll through the list until the desired entry is
displayed.
• Press MENU/SEL to enter the redial menu.
• Press
twice to reach Delete, and press MENU/SEL.
• The screen will display Delete? Press MENU/SEL.
• The screen will display Deleted, and you will hear a confirmation
tone (if Key beeps setting is on).
28
www.vtechphones.com
Delete?
Deleted
Advanced operation
Delete entire redial list
•
•
•
•
•
Press REDIAL to enter redial list.
Press MENU/SEL to enter the redial menu.
Press
three times to reach Delete list, and press MENU/SEL.
The screen will display Delete list? Press MENU/SEL.
The screen will display Deleted, and you will hear a confirmation tone
(if Key beeps setting is on).
Delete list
Delete list?
Deleted
Advanced operation
Advanced
operation
www.vtechphones.com
29
Advanced operation
Call log
If you subscribe to caller ID service, information about each incoming call
will be displayed.
The call log can be entered in idle mode by either pressing , or entered
through the menu:
• Press MENU/SEL to enter the menu.
• Press
and press MENU/SEL.
• You can review, redial, or copy the number into your phonebook.
• Press CLEAR or OFF to quit the menu without saving the change.
• The call log can store up to 50 entries. Calls are displayed in reverse
chronological order (the latest first).
• When the call log is full, the earliest entry is deleted to make room for new
incoming call information.
• Empty will be displayed after entering pressing
if there is no entry in
the call log.
• NEW will be displayed on the screen if there are new call log entries
(missed call and unread).
• Duplicates or anonymous calls (no CID) entries will not be stored in the
call log.
Empty
John
18005959511
2/23 5:27 PM
Store an entry in the phonebook





30
Press
to enter call log.
Use
or
to scroll through the list until the desired entry is displayed.
Press MENU/SEL.
Press
to reach Store No., and press MENU/SEL.
Use the dial pad to enter the name, and press MENU/SEL.
www.vtechphones.com
Store No.
Delete
Advanced operation
 The screen will display Stored, and you will hear a confirmation tone (if
Key beeps setting is on).
Name
Dial an entry in the call log
 Press
to display call log.
 Use
or
to scroll through the list until the desired entry is
displayed.
 Press TALK/FLASH, or
to dial.
Delete an entry from the call log
• Press
to enter call log.
• Use
or
to scroll through the list until the desired entry is
displayed.
• Press MENU/SEL.
• Press
twice to reach Delete, and press MENU/SEL.
• The screen will display Delete? Press MENU/SEL.
• The screen will display Deleted, and you will hear a confirmation tone
(if Key beeps setting is on).
www.vtechphones.com
Select
Store No.
Advanced operation
Advanced
operation
If you want to change the way the number will be dialed (for example with
or without area code):
• Press MENU/SEL when you see the entry you want to dial.
• Press
to reach Select, and press MENU/SEL.
• Use CLEAR and dial pad to change the way the number will be dialed (1 +
area code + number, area code + number, 1 + number, number only).
• Press TALK/FLASH or
to dial.
Aha
Delete
Delete list
Delete?
31
Advanced operation
Delete entire call log
• Press
to enter call log.
• Press MENU/SEL.
• Press
three times to reach Delete list, and press MENU/SEL.
• The screen will display Delete list? Press MENU/SEL.
Deleted
Delete list
• The screen will display Deleted, and you will hear a confirmation tone
(if Key beeps setting is on).
Deleted
Delete list?
Intercom operation
The intercom feature allows conversation between system handsets, call
transfer, and conference calling with different handsets and the external
line.
Internal call
• Press INTERCOM while in idle mode.
• Enter the handset number (1, 2, 3, 4) you want to call.
• Selected handset will ring, press TALK/FLASH or
internal call.
• Press OFF on both handsets to end the call.
32
www.vtechphones.com
Number
to answer an
Advanced operation
Transfer an external call
This feature allows you to transfer an external call from one handset to
another handset.
• During a call, press INTERCOM on the first handset (HS1).
• Enter handset number of selected handset you want to transfer to (for
this example, we’ll call it HS2).
• Once HS2 answers the intercom page, press OFF on HS1 to transfer the
call.
• If HS2 does not answer the intercom page, press OFF on HS1 to return
to the external call, this stops the ringing at HS2.
• If an internal call
is made to a
handset that is
not available,
Not possible
will be displayed
on screen for 15
seconds, and
then the handset
returns to idle.
Conference call
www.vtechphones.com
Conference
Switching
• If the internal call
is not answered,
the ring will not
end until OFF is
pressed in either
handsets.
CONF 00:02:08
33
Advanced operation
Advanced
operation
This feature allows the external call have conversation with up to two
handsets at the same time.
• During a call, press INTERCOM.
• Enter handset number of selected handset you want to have conference
call with.
• Press TALK/FLASH on the selected handset to answer.
• Press MENU/SEL on the selected handset to enter intercom menu.
• Press MENU/SEL to select Conference, the conference call will be
connected.
• Press OFF on either handset to disconnect from the conference call.
The external call will only be disconnected if OFF is pressed on both
handsets.
Advanced operation
When an internal call is connected, you have the option of switching between
the external call and internal call.
• While on an external call press MENU/SEL.
• Use
to select Switching, and press MENU/SEL to toggle between
external call and internal call.
During a conference call, you also have the option to change to a single
call.
• Press MENU/SEL during a conference call.
• Press MENU/SEL to select Single call.
• You can now talk to the other handset while the external call is put on
hold.
34
www.vtechphones.com
Switching
Single call
Batteries
After the battery is fully charged, you can expect the following performance:
Operation
Operating time
While in use (talking)
10 hours
While not in use (standby*)
100 hours (approximately 4 days)
*Handset is off the telephone base but not in base.
The battery needs charging when:
• A new battery is installed in the handset.
• The telephone beeps twice once taken off the base.
• Battery indicator on screen is empty.
www.vtechphones.com
35
Appendix
CAUTION:
To reduce the risk of fire or injury to persons, read and follow these instructions:
1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal
instructions.
3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte
may toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery to conductive materials such as rings, bracelets, and keys. The battery
and/or conductor may overheat and cause burns.
5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified
in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is easily accessible.
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bathtub, kitchen sink, or swimming pool).
5. Do not place this product on an unstable surface, such as a table, shelf or stand. This product may fall, causing serious damage.
6. Slots and openings in the back or bottom of the base unit and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked
by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or hear register. This product should not be
placed in ay area where proper ventilation is not provided.
7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your
dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.
9. Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk
of fire or electric shock. Never spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing pars of the base or handset other than
specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
11. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
12. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions, as improper
adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.
E. If the product has been dropped and the base and/or handset has been damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
15. Only put the handset of your telephone next to your ear when it is in normal talk.
CAUTION: Use only the power adapter provided with this product. To obtain a replacement, call 1(800)222-3111. In Canada, call 1(866)288-4268.
SAVE THESE INSTRUCTIONS
36
www.vtechphones.com
Troubleshooting
If you have difficulty operating your telephone, the suggestions below should solve the problem. If you still have difficulty
after trying these suggestions, call VTech Communications at 1(800)595-9511. In Canada, call VTech Telecommunications
Canada Ltd. at 1(800)267-7377.
Problem
Suggestion
My telephone doesn’t
work at all.
• Make sure the power adaptor is plugged in.
• Make sure the telephone line cord is plugged firmly into the telephone base and the telephone
wall jack.
• Disconnect the power adaptor for a few minutes, and then reconnect it.
• Charge the battery in the handset for 16 hours. For optimum daily performance, return the
handset to its telephone base when not in use.
• Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back
in. Allow up to one minute for the handset and telephone base to reset.
• You may need to purchase a new battery, please refer to the Batteries sections in this user’s
manual.
www.vtechphones.com
37
Appendix
I c annot get a dial • Try all the suggestions above.
tone.
• Move the handset closer to the telephone base. You might have moved out of range.
• Make sure the telephone is set to the correct dial mode for the type of service that you have
(pulse or touchtone). Refer to the Installation section of this user’s manual to set the dial
mode.
• Your line cord might be malfunctioning. Try installing a new line cord.
• If the previous suggestions do not work, disconnect the telephone base from the telephone
jack and connect a different telephone. If there is no dial tone on that telephone either, the
problem is in the wiring or local service. Contact your local telephone company.
Troubleshooting
Problem
Suggestion
I cannot dial out.
• Make sure there is a dial tone before dialing. It is normal for handset to take a second or two
to find the telephone base and produce a dial tone. Wait an extra second before dialing.
• Make sure the telephone is set to the correct dial mode for the type of service that you have
(pulse or touchtone). Refer to the Installation section of this user’s manual to set the dial
mode.
• If the other telephones in your home are having the same problem, the problem is in your wiring
or local service. Contact your local telephone company.
• Eliminate any background noise. Noise from a television, radio or other appliance may cause the
telephone not to dial out properly. If you cannot eliminate the background noise, first try muting
the handset before dialing, or dialing from another room in your home with less background
noise.
The batteries do not
hold a charge.
• Charge the battery in the handset for 16 hours. For optimum daily performance, return the
handset to its telephone base when not in use.
• You may need to purchase a new battery, please refer to the Batteries section in this user’s
manual.
• Your telephone might be malfunctioning. Please refer to the Warranty section of this user’s
manual for further instruction.
38
www.vtechphones.com
Troubleshooting
Problem
Suggestion
I get noise, static, or • Other electronic products can cause interference with your cordless telephone. Try installing
weak signal even when
your telephone away from these types of electronic devices: wireless routers, radios, radio
I’m near the telephone
towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers,
base.
kitchen appliances and other cordless telephones.
• Microwave oven operates on the same frequency as your telephone. It is normal to experience
static on your telephone while the microwave oven is running. Do not install this telephone in
the same outlet or near the microwave oven.
• If your telephone is plugged in with a modem or surge protector, plug the telephone (or modem/
surge protector) into a different location. If this solves the problem, re-locate your telephone
or modem farther apart from one another, or use a different surge protector.
• Relocate your telephone base to a higher location. The telephone will likely get better reception
if not installed in a lower area.
• If the other telephones in your home are having the same problem, the problem is in your wiring
or local service. Contact your local telephone company (charges may apply).
• Make sure the power cord is plugged in.
I hear other calls while
using my telephone.
• Disconnect your telephone base from the telephone jack, and plug in a regular telephone. If
you still hear other calls, the problem is probably in your wiring or local service. Call your local
telephone company.
www.vtechphones.com
39
Appendix
I hear noise in the
handset, and none of
the keys or buttons
work.
Troubleshooting
Problem
Suggestion
My handset does not • Make sure you have the ringer activated. Refer to the section(s) on ringer selection in this
ring when I receive
user’s manual.
a call.
• Make sure the telephone line cord is plugged firmly into the telephone base and the telephone
jack. Make sure the power cord is plugged in.
• The handset may be too far from the telephone base.
• Charge the battery in the handset for 16 hours. For optimum daily performance, return the
handset to its telephone base when not in use.
• You may have too many extension telephones on your telephone line to allow all of them to
ring. Try unplugging some of the other telephones.
• The layout of your home or office might be limiting the operating range. Try moving the telephone
base to another location, preferably on an upper floor.
• If the other telephones in your home are having the issue, the problem is in your wiring or local
service. Contact your local telephone company (charges may apply).
• Test a working telephone at the telephone jack. If another telephone has the same problem, the
problem is the telephone jack. Contact your local telephone company (charges may apply).
• Other electronic products can cause interference with your cordless telephone. Try installing
your telephone as far away from these types of electronic devices as possible: wireless routers,
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless telephones
• Your line cord might be malfunctioning. Try installing a new line cord.
40
www.vtechphones.com
Troubleshooting
Problem
Suggestion
My calls fade or cut in
and out while I’m using
my handset.
• Other electronic products can cause interference with your cordless telephone. Try installing
your telephone as far away from these types of electronic devices as possible: wireless routers,
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless telephones.
• Microwave oven operates on the same frequency as your telephone. It is normal to experience
static on your telephone while the microwave oven is running. Do not install this telephone in
the same outlet or near the microwave oven.
• If your telephone is plugged in with a modem or surge protector, plug the telephone (or modem/
surge protector) into a different location. If this solves the problem, re-locate your telephone
or modem farther apart from one another, or use a different surge protector.
• Relocate your telephone base to a higher location. The telephone will get better reception if
not installed in a lower area.
• If the other telephones in your home are having the issue, the problem is in your wiring or local
service.
My caller ID isn’t
working.
• Caller ID is a subscription service. You must subscribe to this service for this feature to work
on your telephone.
• Your caller must be calling from an area that supports caller ID.
• Both you and your caller’s telephone companies must use caller ID compatible equipment.
41
Appendix
www.vtechphones.com
Troubleshooting
Problem
Suggestion
Common cure for
electronic equipment
If the unit does not seem to be responding normally, then try putting the handset in its telephone
base. If it does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the telephone base.
2. Disconnect the handset battery, and spare battery, if applicable.
3. Wait a few minutes.
4. Connect power to the telephone base.
5. Re-install the battery(ies).
6. Wait for the handset to re-establish its link with the telephone base. To be safe, allow up to
one minute for this to take place.
42
www.vtechphones.com
Operating range
This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a
certain distance ----which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office.
When the handset is out of range, the handset will display Searching. The user can access the handset phonebook, and certain parts of the menu system, i.e. handset setting and registration,
but not the time setting and base setting. Not possible will be displayed if access is tried.
If there is a call while the handset is out of range, it might not ring, or if it does ring, the call might not connect well when you press TALK/FLASH. Move closer to the telephone base, then press
TALK/FLASH to answer the call.
If the handset moves out of range during a telephone conversation, there might be interference.
To improve reception, move closer to the base.
Maintenance
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your base unit near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, use caution when using electric appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild soap. Do not use excess water or
cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If your base unit should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG
THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Then pull the unit out by the unplugged cords.
43
Appendix
www.vtechphones.com
About cordless telephones
•
•
•
•
•
Privacy: the same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the base and the cordless handset by radio waves, so
there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of
cordless phone conversations as being as private as those on corded phones.
Electrical Power: The base unit of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be
made from the cordless handset if the base unit is unplugged or switched off, or if the electrical power is interrupted.
Potential TV Interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the base
unit of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone father away from the TV or VCR will often reduce or eliminate the
interference. (Applies to 25-channel cordless phones only).
Rechargeable Batteries: This product contains either Nickel-Cadmium or Nickel-Metal Hydride rechargeable batteries. Exercise care in handling batteries in order not to short the battery
with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.
Nickel-Metal Hydride Rechargeable Batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could
release caustic material which could cause injury.
Warranty
What does this limited warranty cover?
The manufacturer of this Vtech product, Vtech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by Vtech
in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance
with operation instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America.
What will Vtech Communications do if the Product is not free from material defects in materials and workmanship during the limited warranty period (“Materially Defective
Product”)?
During the limited warranty period, Vtech’s authorized service representative will repair or replace at Vtech’s option, without charge, a Materially Defective Product. If we repair this product, we
may use new or refurbished replacement parts. If we choose to replace this product, we may replace it with a new or refurbished product of the same or similar design. Vtech will return repaired
or replacement produces to you in working condition. Vtech will retain defective parts, modules, or equipment. Repair or replacement of Product, at Vtech’s option, is your exclusive remedy. You
should expect the repair or replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the product extends for ONE (1) YEAR from the date of purchase if we repair or replace a Materially Defective Product under the terms of this limited warranty. This
limited warranty also applies to repaired or replacement Products for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining
on the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, negligent, inundation, fire, water or other liquid
intrusion; or
2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of Vtech; or
3. Product to the extent that the problem experienced is cause by signal conditions, network reliability or cable or antenna systems; or
4. Product to the extent that the problem is caused by use with non-Vtech electrical accessories; or
5. Product whose warranty/quality stickers, Product serial numbers plates or electronic serial numbers have been removed, altered or rendered illegible; or
6. Product purchased, used serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to Products used for rental
purposes); or
44
www.vtechphones.com
Warranty
7.
Product returned without valid proof of purchase (see 2 below); or
8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty service?
• To obtain warranty service in the United States of America, call 1(800)595-9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual.
A check of the Product controls and features may save you a service call.
• Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of
Product(s) to the service location. VTech will return repaired or replaced product under this limited warranty to you, transportation, delivery or handling charges prepaid. VTech assumes no
risk for damage or loss of the Product in transit.
• If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, Vtech will notify you and will request that you authorize the
cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.
What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the Vtech service location along with a description of the malfunction or difficulty;
2. Include “valid proof or purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
Other Limitations
• This warranty is the complete and exclusive agreement between you and Vtech. It supersedes all other written or oral communications related to this Product. Vtech provides no other warranties
for this product. The warranty exclusively describes all of Vtech’s responsibilities regarding the product.
There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.
State Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an written warranty that the product is fit for ordinary use) are limited to one year from date
of purchase, Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
•
In no event shall Vtech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the product, or other
associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this product, some states do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FCC, ACTA and IC regulations
VTech Communications Inc.
CUSTOMER SERVICE at 1(800)595-9511. In Canada, call Vtech Telecommunications Canada Ltd. at 1(800)267-7377.
For repair/warranty information. The telephone company may ask you to disconnect this equipment from the line network until the problem has been corrected.
www.vtechphones.com
45
Appendix
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. It also complies with regulations RSS213 and CS-03 of Industry and Science Canada.
A label is located on the underside of the base unit containing either the FCC registration number and Ringer Equivalence Number (REN) or the IC registration number and Load Number. You
must, upon request, provide this information to your local telephone company.
This equipment is compatible with inductively coupled hearing aids.
Should you experience trouble with this telephone equipment, please contact:
FCC, ACTA and IC regulations
FCC Part 15
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the
product. This product has been tested and found to comply with the criteria. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. It may be safely held against the
ear of the user. The base unit shall be installed & used such that parts of the user’s body other than the hands should be maintained at a comfortable distance of approximately 20cm or more.
FCC Part 68 and ACTA
If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment
was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for
Terminal Attachments (ACTA). We are required to provide you with the following information.
1. Product identifier and REN information
The label on the back or bottom of this equipment contains, among other things, an identifier indicating product approval and the Ringer Equivalence Number (REN). This information must be
provided to your local telephone company upon request. For equipment approved prior to July 23, 2001, the product identifier is preceded by the phrase “FCC Reg No.” and the REN is listed
separately. For equipment approved after that date, the product identifier is preceded by “US” and a colon (:), and the REN is encoded in the product identifier without a decimal point as the sixth
and seventh characters following the colon. For example, the product identifier US:AAAEQ3T123XYZ would indicate an REN of 0.3. The REN is used to determine how many devices you may
connect to your telephone line and still have them ring when you are called. In most, but not all areas, the sum of all RENs should be five (5.0) or less. You may want to contact your local telephone
company for more information.
2. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipment to the premises wiring and the telephone network must comply with the applicable Part 68 rules and technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used
for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual. This equipment may not be used with Coin Telephone Lines or with Party Lines. If
you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.
3. Repair instructions
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer
or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.
4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. The telephone company is required to notify you before
interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to
inform you of your right to file a compliant with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning
of this product. The telephone company is required to notify you if such changes are planned.
5. Hearing aid compatibility
46
www.vtechphones.com
FCC, ACTA and IC regulations
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
6. Programming/testing of emergency numbers
If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three
things in mind:
a. We recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn’t work.
b. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature.
c. Testing the emergency telephone numbers you have stored is not recommended. However, if you do make a call to an emergency number:
• You must remain on the line and briefly explain the reason for the call before hanging up.
• Programming/testing of emergency numbers should be performed during off-peak hours, such as in the early morning or late evening, when the emergency services tend to be less busy.
IC (Industry Canada)
This telephone is registered for use in Canada.
This Class B digital apparatus complies with Canadian ICES-003.
The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
Notice:
This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration
number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada
approved the equipment.
Notice:
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN assigned to each terminal equipment provides an indication of the maximum number of terminal allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed five.
Before installing this equipment, user should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of services in some situations. Privacy of communications
may not be ensured when using this telephone.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to requires the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.
Caution:
Users should not attempt to make sue connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.
Your Cordless Phone is designed to operate at the maximum power allowed by the FCC and IC. This means your handset and base unit can communicate only over a certain distance – which will
depend on the location of the base unit and handset, weather, and the construction and layout of your home or office.
47
Appendix
www.vtechphones.com
Technical specifications
Frequency control
Crystal controlled
PLL synthesizer
Frequency
Base: 1921.536 - 1928.448 MHz
Handset: 1921.536 - 1928.448 MHz
Channels
Five
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Size
Handset: 143.0mm X 48.0mm X 30.0mm
Base: 108.0mm X 103.0mm X 43.0mm
Weight
Handset: 125.6 grams (including battery)
Base: 128.0 grams
Power requirements
Handset: 2.4V DC 600mAh NiMH battery
Base: 6V DC @ 300mA
Memory
Memory: Directory 50, 12 characters and 20 digits each.
Call log: 50 memory locations.
48
www.vtechphones.com
Index
About caller ID information 7
About cordless telephones 44
Advanced operation 23–33
Advanced settings 16–21
Batteries 35
Call log 30
Call waiting 15
Change the PIN 20
Chart of characters 16
Check dial mode 7
Choose a location 5
Conference call 33
De-registering a handset 22
Delete an entry from the call log 31
Delete an entry from the redial list 28
Delete a phonebook entry 26
Delete entire call log 32
Delete entire phonebook 26
Delete entire redial list 29
Dial an entry in the call log 31
Dial a phonebook entry 24
Dial from the redial list 28
Edit a phonebook entry 25
Edit handset name 17
FCC, ACTA and IC regulations 45–47
Maintenance 43
Make, answer, and end calls 14
Mute 14
Operating range 43
Parts checklist 4
Phonebook 23
Handset layout 9
Handset locator 15
Redial list 27
Registration 21
Reset to default settings 13
If you subscribe to DSL service 8
Important safety instructions 36
Installation 4–7
Install handset battery 6
Intercom operation 32
Internal call 32
Search the phonebook 24
Set date and time 11
Set dial mode 12
Set key beeps tone 17
Set low battery tone 18
Set no coverage tone 18
Set ring tone 13
Set ring volume 12
www.vtechphones.com
49
Index
Settings 9–14
Set voicemail 19
Speakerphone 14
Store an entry in the phonebook 23,
30
Store a redial number in the phonebook
27
Technical specifications 48
Telephone base layout 10
Temporary tone dialing 15
Transfer an external call 33
Troubleshooting 37–42
Volume 14
Warranty 44
50
www.vtechphones.com
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon
Distributed in Canada by VTech Telecommunications Canada, Ltd., Richmond, B.C.
Copyright ©2006 for VTECH TELECOMMUNICATIONS LTD.
Printed in China.
91-000xxx-010-000
User’s Manual
www.vtechphones.com
Waiting the
Photo
Model: DE6010

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
About                           : 3fd4a1b9-1513-11da-b7a7-a13d668fa461
Create Date                     : 2006:04:18 17:46:29+08:00
Metadata Date                   : 2006:07:24 14:43:07+08:00
Modify Date                     : 2006:07:24 14:43:07+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7929 bytes, use -b option to extract)
Instance ID                     : uuid:9ac75ab6-0804-4212-8dfd-a78e76e67823
Document ID                     : adobe:docid:indd:4933ee3b-cb66-11da-8f7f-d8df4045c6fa
Rendition Class                 : proof:pdf
Derived From Instance ID        : 4933ee3a-cb66-11da-8f7f-d8df4045c6fa
Derived From Document ID        : adobe:docid:indd:9e93107a-c34b-11da-b13d-f4e6eade38bd
Manifest Link Form              : ReferenceStream
Manifest Placed X Resolution    : 72.00
Manifest Placed Y Resolution    : 72.00
Manifest Placed Resolution Unit : Inches
Manifest Reference Document ID  : uuid:83369d3b-d46b-4d5a-a4fb-5bf91d4c685f
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 52
Creator                         : Adobe InDesign CS2 (4.0)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EW780-6044-01

Navigation menu