Westell 327WXX-6 802.11b/g Wireless ADSL 4port Ethernet/USB Router User Manual users manual page1 to 70
Westell Inc 802.11b/g Wireless ADSL 4port Ethernet/USB Router users manual page1 to 70
Westell >
Contents
- 1. users manual page1 to 70
- 2. users manual page71 to 155
users manual page1 to 70
![](/img.php?id=401961&img=bg1.png)
© Copyright 2004 Westell, Inc. 030-300390 Rev. A Draft 3
VERSALINK™ SMALL BUSINESS VERSALINK (MODEL 327)
USER GUIDE
![](/img.php?id=401961&img=bg2.png)
030-300390 Rev. A Draft 3 2 January 2004
VersaLink™ Small Business Router
User Guide
TABLE OF CONTENTS
1. PRODUCT DESCRIPTION ..................................................................................................................................4
2. SAFETY INSTRUCTIONS...................................................................................................................................4
3. REGULATORY INFORMATION........................................................................................................................5
3.1 FCC Compliance Note...............................................................................................................................5
3.2 Canada Certification Notice.......................................................................................................................6
4. NETWORKING REQUIREMENTS .....................................................................................................................8
5. HARDWARE FEATURES....................................................................................................................................9
5.1 LED Indicators...........................................................................................................................................9
5.2 Cable Connectors and Switch Locations ...................................................................................................9
5.3 Connector Descriptions............................................................................................................................10
5.4 Pinout Descriptions..................................................................................................................................10
6. INSTALLING THE HARDWARE......................................................................................................................12
6.1 Installation Requirements ........................................................................................................................12
6.2 Before you begin......................................................................................................................................12
6.3 Microfilters ..............................................................................................................................................12
6.4 Hardware Installations.............................................................................................................................13
7. CONFIGURING VERSALINK™ FOR INTERNET CONNECTION ...............................................................17
7.1 Setting Up an Account Profile.................................................................................................................17
7.2 Confirm a DSL Sync ...............................................................................................................................22
7.3 Establishing a PPP Session......................................................................................................................23
7.4 Disconnecting a PPP Session...................................................................................................................25
8. SETTING UP MACINTOSH OS X.....................................................................................................................27
9. SETTING UP ADVANCED CONFIGURATION ..............................................................................................32
10. HOME..................................................................................................................................................................33
10.1 Adding Account Profiles .........................................................................................................................34
10.2 Editing Account Profiles..........................................................................................................................35
11. STATUS...............................................................................................................................................................37
11.1 Connection Summary ..............................................................................................................................37
11.2 About .......................................................................................................................................................38
12. CONFIGURATION .............................................................................................................................................39
12.1 Single Static IP ........................................................................................................................................39
12.2 Service Configuration..............................................................................................................................45
12.3 Firewall Configuration.............................................................................................................................52
12.4 Wireless Configuration............................................................................................................................56
![](/img.php?id=401961&img=bg3.png)
030-300390 Rev. A Draft 3 3 January 2004
VersaLink™ Small Business Router
User Guide
12.5 Advanced LAN........................................................................................................................................62
12.6 Advanced WAN.......................................................................................................................................78
13. SETTING UP ADVANCED SERVICE CONFIGURATION.............................................................................96
13.1 Port Forwarding Ranges of Ports.............................................................................................................97
13.2 Adding Port Forwarding Ports.................................................................................................................97
13.3 Port Forwarding Trigger Ports.................................................................................................................98
13.4 Adding Local Trigger Ports.....................................................................................................................99
13.5 Static NAT...............................................................................................................................................99
13.6 Enabling Static NAT..............................................................................................................................100
13.7 Disabling Static NAT.............................................................................................................................101
14. MAINTENANCE...............................................................................................................................................103
14.1 Backup/Store..........................................................................................................................................103
14.2 Firewall Log ..........................................................................................................................................104
14.3 Administrative Password.......................................................................................................................106
14.4 Remote Access.......................................................................................................................................107
14.5 Update Device .......................................................................................................................................108
15. TROUBLESHOOTING .....................................................................................................................................113
15.1 System Self Tests...................................................................................................................................113
15.2 Diagnostic Logs.....................................................................................................................................115
15.3 Statistics.................................................................................................................................................118
15.4 Wireless Statistics..................................................................................................................................122
15.5 Status .....................................................................................................................................................124
16. NAT SERVICES................................................................................................................................................130
17. HELP..................................................................................................................................................................134
18. TECHNICAL SUPPORT INFORMATION......................................................................................................151
19. WARRANTY AND REPAIRS..........................................................................................................................151
20. PRODUCT SPECIFICATIONS.........................................................................................................................152
21. SOFTWARE LICENSE AGREEMENT............................................................................................................153
22. PUBLICATION INFORMATION.....................................................................................................................155
![](/img.php?id=401961&img=bg4.png)
030-300390 Rev. A Draft 3 4 January 2004
VersaLink™ Small Business Router
User Guide
1. PRODUCT DESCRIPTION
The Westell® VersaLink™ Small Business VersaLink provides reliable, high-speed, Internet access to your existing
small office phone line. Your ADSL connection is “always-on” ending the hassles of dial-up modems and busy
signals. Installation is easy ... no tools ... no headaches. Simply connect the hardware, apply power, and perform the
simple software configuration for VersaLink and you are on the Internet.
VersaLink™ is capable of data rates hundreds of times faster than a traditional analog modem. But unlike analog
modems, VersaLink™ allows you to use the same phone line for simultaneous voice/fax communications and high-
speed Internet access, eliminating the need for dedicated phone lines for voice and data needs. VersaLink™
supports a variety of networking interfaces wuch as wireless 802.11b/g/g+, ADSL, Ethernet and the following
optional features:
• VersaPort™: Alternate WAN uplink port
• Layer w/2 QOS with VLAN tagging
• HotSpot
• Somultaneous public/private network support
2. SAFETY INSTRUCTIONS
Never install any telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the
network interface.
Use caution when installing or modifying telephone lines.
WARNING
Risk of electric shock. Voltages up to 140 Vdc (with reference to
ground) may be present on telecommunications circuits.
![](/img.php?id=401961&img=bg5.png)
030-300390 Rev. A Draft 3 5 January 2004
VersaLink™ Small Business Router
User Guide
3. REGULATORY INFORMATION
3.1 FCC Compliance Note
(FCC ID: CH8-327WXX-6)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the Federal Communication Commission (FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to a different circuit from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications made to the product, unless expressly approved by Westell Inc., could void the users’ right to operate
the equipment.
RF EXPOSURE
This device has been tested and complies with FCC RF Exposure (SAR) limits in typical laptop computer
configurations and this device can be used in desktop or laptop computers with side-mounted PCMCIA slots, which
can provide 20 cm separation distance from the antenna to the body of the user or a nearby person. Thin laptop
computers may need special attention to maintain antenna spacing while operating. This device cannot be used with
handheld PDAs (personal digital assistants). Use in other configurations may not ensure compliance with FCC RF
exposure guidelines. This device and its antenna must not be co-located or operate in conjunction with another
antenna or transmitter.
PART 68 - COMPLIANCE REGISTRATION
This equipment (Model 327W15) complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. A label on the bottom of this equipment contains, among other information, the Ringer Equivalence Number
(REN) and the product identifier. For products approved after July 23, 2001 the product identifier is in the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g. 03 is a REN of 0.3).
The REN is used to determine the number of devices that may be connected to a telephone line. For earlier products,
the REN is separately shown on the label. If requested, this number must be provided to the telephone company.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most,
but no all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company.
This equipment is designated to connect to the telephone network or premises wiring using a compatible modular
jack that is Part 68 compliant. An FCC compliant telephone cord and modular plug is provided with the equipment.
See the Installation Information section of this User Guide for details.
![](/img.php?id=401961&img=bg6.png)
030-300390 Rev. A Draft 3 6 January 2004
VersaLink™ Small Business Router
User Guide
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instruction for details.
If this terminal equipment (Model 327W15) causes harm to the telephone network, the telephone company may
request you to disconnect the equipment until the problem is resolved. The telephone company will notify you in
advance if temporary discontinuance of service is required. If advance notification is not practical, the telephone
company will notify you as soon as possible. You will be advised of your right to file a complaint with the FCC if
you believe such action is necessary.
If you experience trouble with this equipment (Model 327W15), do not try to repair the equipment yourself. The
equipment cannot be repaired in the field. Contact your ISP, or contact the original provider of your DSL equipment.
The telephone company may make changes to their facilities, equipment, operations, or procedures that could affect
the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you
to make the modifications necessary to maintain uninterrupted service.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this
equipment (Model 327W15) does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
This equipment cannot be used on public coin phone service provided by the telephone company. Connection of this
equipment to party line service is subject to state tariffs.
3.2 Canada Certification Notice
The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain
telecommunications network protective, operations and safety requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements document(s). The department does not guarantee the equipment will
operate to the user’s satisfaction.
This equipment meets the applicable Industry Canada Terminal Equipment Technical Specification. This is
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration
was performed based on a Declaration of Conformity indicating that Industry Canada technical specification were
met. It does not imply that Industry Canada approved the equipment. The Ringer Equivalence Number (REN) is 0.0.
The Ringer Equivalence Number that is assigned to each piece of terminal equipment provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface
may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed five.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the
local Telecommunication Company. The equipment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the above conditions may not prevent degradation
of service in some situations. Connection to a party line service is subject to state tariffs. Contact the state public
utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this
equipment (Model 327W15) does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
If you experience trouble with this equipment (Model 327W15), do not try to repair the equipment yourself. The
equipment cannot be repaired in the field and must be returned to the manufacturer. Repairs to certified equipment
![](/img.php?id=401961&img=bg7.png)
030-300390 Rev. A Draft 3 7 January 2004
VersaLink™ Small Business Router
User Guide
should be coordinated by a representative, and designated by the supplier. Refer to section 12 in this User Guide for
further details.
The termination on an interface may consist of any combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
Users should ensure, for their own protection, that the electrical ground connections of the power utility, telephone
lines, and internal, metallic water pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should contact the
appropriate electrical inspection authority, or electrician, as appropriate.
![](/img.php?id=401961&img=bg8.png)
030-300390 Rev. A Draft 3 8 January 2004
VersaLink™ Small Business Router
User Guide
4. NETWORKING REQUIREMENTS
The following system specifications are required for optimum performance of the VersaLink™ via 10/100 Base-T
or Wireless installations.
CONNECTION
TYPE MINIMUM SYSTEM REQUIREMENTS NETWORKING
SCHEME
ETHERNET
• Pentium® or equivalent and above class machines
• Microsoft® Windows® (98, ME, NT 4.0, 2000, or
XP) or
Macintosh® OS X installed
• Linux / Unix / Solaris
• 64 MB RAM (128 MB recommended)
• 10 MB of free hard drive space
• TCP/IP Protocol stack installed
• 10/100 Base-T Network Interface Card (NIC)
• Computer Operating System CD-ROM on hand
Networking via 10/100
Base-T Ethernet
requires an available
Ethernet port with a
10/100 Base-T Network
Interface Card (NIC)
installed.
WIRELESS
IEEE 802.11g
• Pentium® or equivalent and above class machines
• Microsoft® Windows® (98, ME, 2000, or XP) or
Macintosh® OS X installed
• Computer Operating System CD-ROM on hand
• Internet Explorer 4.x or Netscape Navigator 4.x or
higher
• 64 MB RAM (128 MB recommended)
• 10 MB of free hard drive space
• An available IEEE 802.11b/g PC card or USB adapter
Networking via
Wireless or other
802.11b/g capable
network adapter card.
![](/img.php?id=401961&img=bg9.png)
030-300390 Rev. A Draft 3 9 January 2004
VersaLink™ Small Business Router
User Guide
5. HARDWARE FEATURES
5.1 LED Indicators
This section explains the LED States and Descriptions. LED indicators are used to verify the unit’s operation and
status.
LED States and Descriptions
LED State Description
Solid Green Power ON
No Light No Power
POWER
Solid Red
POST (Power On Self Test), Failure (not bootable) or Device
Malfunction. Note: The Power LED should be red no longer than
two seconds after the power on self test passes.
Solid Green 10/100 Base-T link/activity.
Flashing Green 10/100 Base-T traffic.
ETHERNET
OFF No Ethernet link or traffic for specific 10/100 Base-T connection.
Solid Green Wireless enabled and functioning.
Flashing Green Wireless activity present (traffic to/from any Wireless interface).
WIRELESS
OFF Wireless disabled or not functioning.
Solid Green Power ON and synchronized with ADSL line card.
OFF Modem power Off.
Flashing Green DSL attempting to sync with carrier detect signal.
DSL
Solid Amber Modem is in safe boot mode.
Solid Green Internet link established
OFF Modem Power is Off, Modem is in Bridge Mode, or the
connection is not present.
INTERNET
Flashing Green IP connection established and IP Traffic is passing through
device (in either direction).
5.2 Cable Connectors and Switch Locations
• DSL Connector (RJ-11)
• Reset Button
• (4) Ethernet Connector (RJ-45) with optional uplink port
(Note: When using the optional uplink port, Ehternet LAN connection is limited to 3)
• Power Connector
• Wireless IEEE 802.11b/g connector
![](/img.php?id=401961&img=bga.png)
030-300390 Rev. A Draft 3 10 January 2004
VersaLink™ Small Business Router
User Guide
(Note: When using the optional uplink port, Ethernet LAN connection is limited to 3)
5.3 Connector Descriptions
The following chart displays the connector types.
SYMBOL NAME TYPE FUNCTION
DSL LINE 6-pin RJ-11 modular jack Connects to an ADSL-equipped telephone jack or
DSL connection of a POTS splitter.
-
12V
POWER Barrel connector Power source.
ETHERNET 8-pin (RJ-45) modular jack Connects the Ethernet device to the PC.
Wireless ANTENNA SMA connector and antenna Connects to wireless IEEE 802.11b/g/g+
5.4 Pinout Descriptions
The following tables list the pinout descriptions.
DSL Pinouts
Pinout Description
1, 2, 5, 6 Not Used
3 DSL Tip
4 DSL Ring
Ethernet/Optional Uplink Port Pinouts
Pinout Description
1 Rx+
2 Rx-
3 Tx+
4,5,7,8 Not Used
6 Tx-
DSL Line
Connecto
r
ON/OFF
Switch
Power
Connecto
r
Ethernet Connectors
(
E1 throu
g
h E4
)
Reset
Button
Wireless
Connecto
r
![](/img.php?id=401961&img=bgb.png)
030-300390 Rev. A Draft 3 11 January 2004
VersaLink™ Small Business Router
User Guide
![](/img.php?id=401961&img=bgc.png)
030-300390 Rev. A Draft 3 12 January 2004
VersaLink™ Small Business Router
User Guide
6. INSTALLING THE HARDWARE
6.1 Installation Requirements
To install VersaLink™, you will need the following:
• A Network Interface Card (NIC) installed in your PC or
• An IEEE 802.11b/g PC card or USB adapter installed on your PC
NOTE: Internet service provider subscriber software and connection requirements may vary. Consult your ISP for
installation instructions. Please wait until you have received notification from your ISP that your DSL line has been
activated before installing VersaLink™ and the software.
6.2 Before you begin
Make sure that your kit contains the following items:
• Westell VersaLink™ Small Business VersaLink
• Power Supply
• RJ-45 Ethernet cable
• RJ-11 Phone cable
• SMA Antenna
• Westell CD-ROM containing User Guide in PDF format
• Quick Start Guide
6.3 Microfilters
ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, computer modem
or any similar conventional device. Failure to do so may degrade telephone voice quality and ADSL performance.
Install a microfilter if you desire to use the DSL-equipped line jack for telephone, answering machine, fax machine
or other telephone device connections. Microfilter installation requires no tools or telephone rewiring. Just unplug
the telephone device from the baseboard or wall mount and snap in a microfilter, next snap in the telephone device.
You can purchase microfilters from your local electronics retailer, or contact the original provider of your DSL
equipment.
![](/img.php?id=401961&img=bgd.png)
030-300390 Rev. A Draft 3 13 January 2004
VersaLink™ Small Business Router
User Guide
6.4 Hardware Installations
NOTE: Please wait until you have received notification from your ISP that your DSL line has been
activated before installing VersaLink.
NOTE: If you are using VersaLink™ in conjunction with an Ethernet Hub or Switch, refer to the manufacturer’s
instructions for proper installation and configuration. When using a Microfilter, be certain that the DSL phone cable
is connected to the “DSL/HPN” non-filtered jack. Westell recommends the use of a surge suppressor to protect
equipment attached to the AC power supply.
6.4.1 Installation via 10/100 Base-T Ethernet
NOTE: Before you connect via 10/100 Base-T, you must have an available Ethernet card installed in your
computer. If your Ethernet card does not auto-negotiate, you must set it to half duplex. Refer to the
Ethernet card manufacturer’s instructions for installing and configuring your Ethernet card.
1. Connect the power supply cord to the power connector marked 12V on the rear panel of VersaLink. Plug the
other end of the power supply into a wall socket.
2. Connect the DSL phone cable from the jack marked on the rear panel of VersaLink to the DSL-equipped
telephone line jack on the wall. IMPORTANT: Do not use a DSL filter on this connection. You must use the
phone cord that was provided with the kit.
3. Connect the yellow Ethernet cable from any one of the Ethernet jacks marked on the rear panel of
VersaLink to the Ethernet port on your computer. Repeat this step to connect up to three additional PCs to
VersaLink.
NOTE: You may connect to any of the four Ethernet jacks on the rear panel of VersaLink as they serve as an
Ethernet switch.
4. Check to see if the DSL/RDY LED is solid green. If this LED is solid green, VersaLink is functioning properly.
5. Check to see if the Ethernet LED lights solid green. Solid green indicates that the Ethernet connection is
functioning properly.
Congratulations! You have completed the Ethernet hardware installation. No software installation is required when
using only an Ethernet connection. Proceed to section 7 to configure VersaLink for Internet connection.
!
![](/img.php?id=401961&img=bge.png)
030-300390 Rev. A Draft 3 14 January 2004
VersaLink™ Small Business Router
User Guide
Figure 1. Connection via 10/100 Base-T Ethernet
6.4.2 Connecting PCs via Wireless
IMPORTANT: If you are connecting to VersaLink via a wireless network adapter, the SSID must be the same for
both VersaLink and your PC’s wireless network adapter. The default SSID for VersaLink is the serial number of the
unit (located below the bar code on the bottom of the unit and also on the Westell shipping carton). Locate and run
the utility software provided with your PC’s Wireless network adapter and enter the SSID value. The PC’s wireless
network adapter must be configured with the SSID (in order to communicate with VersaLink) before you begin the
account setup and configuration procedures. Later, for privacy you can change the SSID by following the
procedures outlined in section 12.4 (Wireless Configuration).
NOTE: Client PCs can use any Wireless Fidelity (Wi-Fi) 802.11b/g certified card to communicate with VersaLink.
The Wireless card and VersaLink must use the same Wired Equivalent Privacy (WEP) security code type. The
factory default for WEP is DISABLED. If you enable WEP, you must ensure the network setting for your wireless
adapter is set to “Must Use Shared Key for WEP” or “Open Wi-Fi.” You must ensure that your PC’s Wi-Fi adapter
is configured properly for whichever network setting you use. You can access the settings in the advanced properties
of the wireless network adapter.
![](/img.php?id=401961&img=bgf.png)
030-300390 Rev. A Draft 3 15 January 2004
VersaLink™ Small Business Router
User Guide
To network VersaLink to additional computers in your home or office using a wireless installation, you will need to
confirm the following:
1. Ensure that an 802.11b/g wireless network adapter has been installed in each PC on your wireless network.
2. Install the appropriate drivers for your Wireless IEEE802.11b or IEEE802.11g PC card or USB adapter.
3. Make sure the SMA antenna connector is loose. Orient the antenna in the proper configuration. Then, tighten
the antenna knob to lock it into place.
4. Connect the power supply cord to the power connector marked 12V on the rear panel of VersaLink. Plug the
other end of the power supply into a wall socket.
5. Connect the DSL phone cable from the connector marked on the rear panel of VersaLink to the DSL-
equipped telephone line jack on the wall. IMPORTANT: Do not use a DSL filter on this connection. You must
use the phone cord that was provided with the VersaLink kit.
6. Check to see if the DSL/RDY LED is flashing Green. If the DSL/RDY LED is flashing Green, VersaLink is
functioning properly.
7. Check to see if VersaLink’s Wireless LED lights solid Green. This means that the Wireless interface is
functioning properly.
Congratulations! You have completed the Wireless installation VersaLink. You must now go to section 7 to
configure VersaLink for Internet connection.
Figure 2. Connection via Wireless
![](/img.php?id=401961&img=bg10.png)
030-300390 Rev. A Draft 3 16 January 2004
VersaLink™ Small Business Router
User Guide
6.4.3 Ethernet and Wireless Combination Installation
The VersaLink™ supports simultaneous use of 10/100 Base-T Ethernet and Wireless. The following instructions
explain how to install VersaLink for simultaneous use of Ethernet and Wireless ports.
NOTE: Refer to Figure 1 and Figure 2 for instructions on hardware installation via Ethernet and Wireless
connections.
1. Ensure that an 802.11b/g wireless network adapter has been installed in each PC on your wireless network
2. Install the appropriate drivers for your Wireless IEEE802.11b or IEEE802.11g PC card or USB adapter.
3. Make sure the SMA antenna connector is loose. Orient the antenna in the proper configuration. Then, tighten
the antenna knob to lock it into place.
4. Connect the power supply cord to the power connector marked 12V on the rear panel of VersaLink. Plug the
other end of the power supply into a wall socket.
5. Connect the DSL phone cable from connector marked on the rear panel of VersaLink to the DSL-equipped
telephone line jack on the wall. IMPORTANT: Do not use a DSL filter on this connection. You must use the
phone cord that was provided with the kit.
6. Connect the yellow Ethernet cable from any one of the Ethernet jacks marked on the rear panel of
VersaLink to the Ethernet port on your computer. Repeat this step to connect up to three additional PCs to
VersaLink.
NOTE: You may connect to any of the four Ethernet jacks on the rear panel of VersaLink as they serve as an
Ethernet switch.
7. Check to see if the DSL/RDY LED is solid green. If the DSL/RDY LED is solid green, VersaLink is
functioning properly.
8. Check to see if the Ethernet LED lights solid green. Solid green indicates the Ethernet connection is functioning
properly.
9. Check to see if VersaLink’s Wireless LED lights solid Green. This means that the Wireless interface is
functioning properly.
Congratulations! You have completed the simultaneous hardware (Ethernet and Wireless) installation. You must
now go to section 7 to configure VersaLink for Internet connection.
![](/img.php?id=401961&img=bg11.png)
030-300390 Rev. A Draft 3 17 January 2004
VersaLink™ Small Business Router
User Guide
7. CONFIGURING VERSALINK™ FOR INTERNET CONNECTION
To surf the Internet using VersaLinK™, you must set up your account profile, confirm your DSL sync, and establish
a PPP session with your Internet Service Provider (ISP). Refer to the Internet service provider’s installation manual
to install the software required for your Internet connection.
NOTE: Internet service provider subscriber software and connection requirements may vary. Consult your Internet
service provider for installation instructions.
7.1 Setting Up an Account Profile
After connecting VersaLink, bring up your Web browser and type http://dslrouter or http://192.168.1.1 in the
browser’s address window. Press Enter on your keyboard. The Getting Started screen will appear. Click on next.
![](/img.php?id=401961&img=bg12.png)
030-300390 Rev. A Draft 3 18 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked on Next, the following screen will be displayed. This screen will allow you to set up your account
profile.
NOTE: Before you set up your account profile, you must obtain your Account ID, Account Password, and
VPI/VCI values from your Internet service provider. You will use this information when you set up your account
parameters. If you are at a screen and need help, click on the Help button to learn more about the screen, or see
section 17 (Help) for additional information on the help messages.
Type in your account parameters. (Account parameters are required before connecting to the Internet.)
Account Parameters include:
● Connection Name-the Connection Name is a word or phrase that you use to identify your account.
(You may enter up 64 characters in this field.)
● Account ID-the Account ID is provided by your Internet Service Provider.
(You may enter up 255 characters in this field.)
● Account Password-the Account Password is provided by your Internet Service Provider.
(You may enter up 255 characters in this field.)
When you enter your account parameters at the User Name screen, they will be displayed as shown in the screen
below. Click next if you want your account parameters to take effect. Click on reset if you do not want the account
parameters that you entered to take effect or if you want to re-enter the parameters.
![](/img.php?id=401961&img=bg13.png)
030-300390 Rev. A Draft 3 19 January 2004
VersaLink™ Small Business Router
User Guide
Enter the VPI and VCI values (0 for VPI and 35 for VCI default) you obtained from your Internet service provider.
Click on next.
N
OTE: Depending on your Internet Service
Provider, the VPI/VCI screen may come
pre-configured and it will be displayed here.
In this case, you should not change any
values in this screen. Click on next to go to
the PROTOCOL screen.
VPI = 0
VCI = 35
![](/img.php?id=401961&img=bg14.png)
030-300390 Rev. A Draft 3 20 January 2004
VersaLink™ Small Business Router
User Guide
Select the Protocol type that you obtained from your Internet Service Provider. Click on next.
When the SET-UP COMPLETE screen appears, you have successfully completed your Account Profile setup.
Click on done.
N
OTE: Depending on your Internet Service
Provider, the PROTOCOL screen may
come pre-configured and it will be displayed
here. In this case, you will need to click on
next to go to the SET-UP COMPLETE
screen.
![](/img.php?id=401961&img=bg15.png)
030-300390 Rev. A Draft 3 21 January 2004
VersaLink™ Small Business Router
User Guide
If you changed the VPI/VCI settings and clicked on done in the SET-UP COMPLETE screen, the following
screen will appear. Click on OK.
If you clicked on OK, the following screen will be displayed. VersaLink™ will be reset and the new configuration
will take effect. Next, proceed to section 7.2 to confirm your DSL sync.
![](/img.php?id=401961&img=bg16.png)
030-300390 Rev. A Draft 3 22 January 2004
VersaLink™ Small Business Router
User Guide
7.2 Confirm a DSL Sync
Remember, you must have active DSL service before VersaLink can synchronize with your ISP’s equipment. To
determine if VersaLink has a DSL sync, view the DSL Connection Rate in the Connection Overview section (see the
following homepage screen). If the status reads No DSL Connection, check the DSL physical connection, explained in
section 6 (INSTALLING THE HARDWARE) of this User Guide.
NOTE: If no DSL sync is established, the connection button will not be displayed in the following screen. To
determine if the DSL sync is established, check VersaLink’s DSL/RDY LED. If the DSL/RDY LED is not solid
green, you do not have a DSL sync established. Contact your ISP for further instructions.
![](/img.php?id=401961&img=bg17.png)
030-300390 Rev. A Draft 3 23 January 2004
VersaLink™ Small Business Router
User Guide
The screen below shows the connection rate, indicating that a successful SYNC has been established. The
connection rate values represent the transmission speed of your DSL line. (VersaLink might take time to report the
values.) Click on the Connect button to establish a PPP session.
7.3 Establishing a PPP Session
If you clicked on connect button in the Connection Overview window, the following screen will appear briefly.
The PPP Status in the Connection Overview window allows you to view the state of your ISP connection. When
the PPP Status displays Connecting…, this means that you are establishing a PPP session.
NOTE: VersaLink will handle transmission rates up to 8 Mbps in ADSL mode. Your actual DSL rates may vary
depending on your Internet service provider.
![](/img.php?id=401961&img=bg18.png)
030-300390 Rev. A Draft 3 24 January 2004
VersaLink™ Small Business Router
User Guide
Once a PPP session has been established, the PPP Status will display UP. Congratulations! You may now surf the
Internet.
![](/img.php?id=401961&img=bg19.png)
030-300390 Rev. A Draft 3 25 January 2004
VersaLink™ Small Business Router
User Guide
For example, if you want to visit Westell’s home page, type Http://www.westell.com in your browser’s address
window.
7.4 Disconnecting a PPP Session
If you have finished surfing the Internet and want to disconnect from your Internet service provider, click on the
Disconnect button in the Connection Overview screen (the preceding screen). The following pop-up screen will
appear. Click on OK to disconnect the PPP session.
If you clicked the Disconnect button in the preceding Connection Overview screen, the PPP Status should display
DOWN. This means that you no longer have a PPP session. In this event, VersaLink will maintain its DSL
connection. If you want to remove the DSL connection, power down VersaLink via the power switch on the rear of
VersaLink.
![](/img.php?id=401961&img=bg1a.png)
030-300390 Rev. A Draft 3 26 January 2004
VersaLink™ Small Business Router
User Guide
When you are ready to establish a PPP session, click on the connect button. (If you powered down VersaLink, you
must first power up VersaLink and log into your account profile before you establish a PPP session.)
NOTE: When you are ready to exit VersaLink’s interface, click on the X (close) in the upper right-hand corner of
the window. Closing the window will not affect your PPP Status (your PPP session will not be disconnected). You
must click on the disconnect button to disconnect your PPP session.
![](/img.php?id=401961&img=bg1b.png)
030-300390 Rev. A Draft 3 27 January 2004
VersaLink™ Small Business Router
User Guide
8. SETTING UP MACINTOSH OS X
This section provides instructions on how to use Macintosh Operating System 10 with VersaLink. Follow the
instructions in this section to create a new network configuration for Macintosh OS X.
NOTE: Macintosh computers must use VersaLink’s Ethernet installation. Refer to section 6,
(INSTALLING THE HARDWARE).
Open the System Preference Screen
After you have connected the Westell VersaLink to the Ethernet port of your Macintosh, the screen below will
appear. Click on the “Apple” icon in the upper right corner of the screen and select System Preferences.
Choose the Network Preferences
After selecting System Preferences…, from the previous screen, the System Preferences screen will be displayed.
From the System Preferences screen, click on the Network icon.
!
![](/img.php?id=401961&img=bg1c.png)
030-300390 Rev. A Draft 3 28 January 2004
VersaLink™ Small Business Router
User Guide
Create a New Location
After selecting the Network icon at the System Preferences screen, the Network screen will be displayed. Select
New Location from the Location field.
Name the New Location
After selecting New Location from the Network screen, the following screen will be displayed. In the field labeled
Name your new location:, change the text from “Untitled” to “Westell.” Click OK.
![](/img.php?id=401961&img=bg1d.png)
030-300390 Rev. A Draft 3 29 January 2004
VersaLink™ Small Business Router
User Guide
Select the Ethernet Configuration
After clicking on OK in the preceding screen, the Network screen will be displayed. The Network screen shows the
settings for the newly created location. From the Configure field in the Network screen, select Built-in Ethernet.
Click on Save.
NOTE: Default settings for the Built-in Ethernet configuration are sufficient to operate VersaLink.
Check the IP Connection
To verify that the computer is communicating with VersaLink, follow the instructions below.
1. Go to the “Apple” icon in the upper right corner of the screen and select System Preferences.
2. From the System Preferences screen, click on the Network icon. The Network screen will be displayed.
3. From the Configure field in the Network screen, select Built-in Ethernet.
4. View the IP address field. An IP address that begins with 192.168.1 should be displayed.
NOTE: The DHCP server provides this IP address. If this IP address is not displayed, check VersaLink’s wiring
connection to the PC. If necessary, refer to section 5 for hardware installation instructions.
![](/img.php?id=401961&img=bg1e.png)
030-300390 Rev. A Draft 3 30 January 2004
VersaLink™ Small Business Router
User Guide
Create a User Account
In the address window of your Internet Explorer web browser, type Http://dslVersaLink/. Press enter on your
keyboard.
The Getting Started screen will be displayed. You may now begin your Account Setup. Refer to section 7 of this
User Guide to configure your Westell VersaLink for Internet connection.
![](/img.php?id=401961&img=bg1f.png)
030-300390 Rev. A Draft 3 31 January 2004
VersaLink™ Small Business Router
User Guide
The following sections explain the advanced features of VersaLink™.
[This Page Left Blank Intentionally]
![](/img.php?id=401961&img=bg20.png)
030-300390 Rev. A Draft 3 32 January 2004
VersaLink™ Small Business Router
User Guide
9. SETTING UP ADVANCED CONFIGURATION
Advanced Configuration instructions are explained in Section 10 through
Section 16. If you want to set up advanced features for VersaLink™, follow
the instructions provided in sections 10 through 16.
STOP! The following sections assume that you have active DSL and Internet service.
VersaLink™ allows you to make changes to advanced features such as account profiles, routing configurations, and
firewall settings. The following sections will explain each feature and show you how to make changes to
VersaLink’s settings. If you are at a screen and need help, click on the Help button to learn more about that screen.
NOTE: As you navigate through the various screens of VersaLink, the name of the active page that you have
selected will appear in the left-hand side of the homepage screen, as shown below. Please note that the actual values
might differ from the values displayed in the screens.
![](/img.php?id=401961&img=bg21.png)
030-300390 Rev. A Draft 3 33 January 2004
VersaLink™ Small Business Router
User Guide
10. HOME
If you have set up your account profile and established your PPP session as discussed in section 7, the following
settings will be displayed when you click on your Home page. Click on profile editor to edit your connection
profile.
NOTE: If you have created multiple account profiles, select the radio button for the active account profile.
Connection Overview Displays your DSL connection rate.
Connection Name This Connection Name is from the connection profile that you established in section 7.
PPP Status UP = PPP session established
DOWN = No PPP session established.
Connect/Disconnect CONNECT = Establish a PPP session
DISCONNECT = Disconnect a PPP session
Profile Editor This allows you to make changes to the profile that you created in section 7.
![](/img.php?id=401961&img=bg22.png)
030-300390 Rev. A Draft 3 34 January 2004
VersaLink™ Small Business Router
User Guide
10.1 Adding Account Profiles
If you select the Profile Editor button from your Home page, the Advanced Home screen will appear, as shown
below. Click on the new connection button in the Advanced Home screen. The New Connection screen will
appear. Enter your account profile information and click on New. Next, click on OK in the pop-up screen to save
your new connection. If you do not want to add a connection profile, click on Close in the New Connection screen.
NOTE: You may store up to eight unique user profiles in VersaLink. Details on the New Connection screen are
located at the end of this section.
If you clicked OK in the “Save new connection?” pop-up screen, the following screen will be displayed. This
screen will allow you to edit a connection profile. Select a profile name from the Connection Name field and click
on the edit button adjacent to the name.
![](/img.php?id=401961&img=bg23.png)
030-300390 Rev. A Draft 3 35 January 2004
VersaLink™ Small Business Router
User Guide
10.2 Editing Account Profiles
If you clicked on Edit in the preceding screen, the Edit “My Connection” screen will appear. Follow the steps in
the Edit “My Connection” screen to change your existing connection profile, which you set up in section 7. If you
do not want to change your connection profile, click on close in the screen. Click on delete if you want to delete
your connection profile.
![](/img.php?id=401961&img=bg24.png)
030-300390 Rev. A Draft 3 36 January 2004
VersaLink™ Small Business Router
User Guide
Connection Name This field allows you to enter a new connection name of your choice (up to 64
characters).
Account ID Use the same account ID that you used in section 7 if you are connecting to the
same Service Provider. If you have multiple Service Providers, you can enter this
information at this time.
Account Password Use the same account password that you used in section 7 if you are connecting
to the same Service Provider. If you have multiple Service Providers, you can
enter this information at this time.
Service Profile Westell recommends that you use the Default parameter.
Manual Factory default = MANUAL
Selecting this feature allows you to manually establish your PPP session.
On Demand Selecting this feature allows VersaLink to automatically re-establish your PPP
session upon demand.
Always On Selecting this feature allows VersaLink to establish an “always-on” PPP session
if it goes down.
Save Password Selecting this feature allows you to save the password for your new connection
profile in VersaLink so that you will not have to re-enter it in case of a re-boot.
Minutes for Connection Time Out This option allows you to specify the number of minutes that you want a PPP
session to stay active before it is disconnected due to inactivity. (This feature
works if you have selected the Time Out Enable feature explained above.)
![](/img.php?id=401961&img=bg25.png)
030-300390 Rev. A Draft 3 37 January 2004
VersaLink™ Small Business Router
User Guide
11. STATUS
11.1 Connection Summary
The following settings will be displayed if you select Connection Summary from the Status menu.
DSL Connection Information
Connection Rate This field will let you know if you have a DSL Sync (UP/DOWN) and the DSL rate at
which you are connected.
Connection Status This field will show how much information was received (IN) or sent (OUT) in packets.
IP Network Address PPP = An IP address identifies your device on the Internet
Primary DNS = Provided by your Service Provider
Note: The actual values might differ from the values displayed in this screen.
0
35
![](/img.php?id=401961&img=bg26.png)
030-300390 Rev. A Draft 3 38 January 2004
VersaLink™ Small Business Router
User Guide
Secondary DNS = Provided by your Service Provider
Ethernet Status This field will display your Ethernet information that was received (IN) or sent (OUT) in
packets on your Ethernet port.
ATM Network Address This field will display your VPI and VCI values, which are provided by your ISP.
Firewall Status This field will display your firewall traffic in packets.
Passed: Monitors information traffic that was successfully received (IN) or transmitted
(OUT) in packets.
Dropped: Monitors information traffic that was not successfully received (IN) or
transmitted (OUT) due to your firewall settings.
PPP Connection Information
Connection Name This is from the connection profile that you established in section 7.
Connection Duration This field will display how long your PPP session has been connected.
Status This field will display the status of your PPP session.
UP=Connected
DOWN=Disconnected
Number of Reconnects This field will display the number of attempts that were made to establish a PPP session.
11.2 About
The following settings will be displayed if you select About from the Status menu.
Model Number VersaLink manufacturer’s model number.
Serial Number VersaLink manufacturer’s serial number.
MAC Address Media Access Controller (MAC) i.e., hardware address of this device.
Software Version Version of Application Software.
Software Model VersaLink application type.
Description Product description.
Boot Loader Version of boot loader software
Note: The actual values mi
g
ht differ from the values dis
p
la
y
ed in this screen.
A90-327W15-06
![](/img.php?id=401961&img=bg27.png)
030-300390 Rev. A Draft 3 39 January 2004
VersaLink™ Small Business Router
User Guide
12. CONFIGURATION
12.1 Single Static IP
The following settings will be displayed if you select Single Static IP from the Configuration menu.
STOP: Static NAT must be disabled before you can enable Single Static IP. To disable Static NAT, select Service
Configuration from the Configuration menu. Next, click on the static NAT button. Select the device from the
Static NAT Device drop-down menu and click on disable. Return to Single Static IP Configuration by selecting
Single Static IP Configuration from the Configuration menu.
![](/img.php?id=401961&img=bg28.png)
030-300390 Rev. A Draft 3 40 January 2004
VersaLink™ Small Business Router
User Guide
12.1.1 Enabling Single Static IP Configuration
To enable Single Static IP, select a device from the options listed in the window that will share your Single Static IP.
Click on enable.
NOTE: The Single Static IP Configuration screen allows you to select the device on your LAN that will share your
Single Static IP.
If you clicked on enable, the following pop-up screen will appear. Click on OK to enable this device for Single
Static IP. Click on Cancel if you do not want to enable Single Static IP.
NOTE: The actual device name may differ from the name displayed in this screen.
![](/img.php?id=401961&img=bg29.png)
030-300390 Rev. A Draft 3 41 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked on OK in the preceding pop-up screen, the following pop-up screen will appear. VersaLink must be
reset in order for the new configuration to take effect. Click on OK.
If you clicked on OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and
the new configuration will take effect.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session). Next, Select Single Static IP from the
Configuration menu to confirm that Single Static IP is enabled, as shown in the following screen.
![](/img.php?id=401961&img=bg2a.png)
030-300390 Rev. A Draft 3 42 January 2004
VersaLink™ Small Business Router
User Guide
STOP! After you enable Single Static IP, you must reboot your computer.
12.1.2 Disabling Single Static IP
To disable Single Static IP, select Single Static IP from the Configuration menu. Click on disable.
![](/img.php?id=401961&img=bg2b.png)
030-300390 Rev. A Draft 3 43 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked on disable in the preceding screen, the following pop-up screen will be displayed. Click on OK.
If you clicked on OK in the Disable IP Passthrough? screen, the following pop-up screen will be displayed. This
screen will allow the modem to be reset and the new configuration will take effect. Click on OK.
If you clicked on OK in the preceding screen, the following screen will be displayed. VersaLink will be reset and
the new configuration will take effect.
After a brief delay, the home page will be displayed. Confirm that you have a DSL sync and that your PPP session
displays UP. (Click on the connect button to establish a PPP session). Next, Select Single Static IP from the
Configuration menu to confirm that Single Static IP is disabled, as shown in the following screen.
![](/img.php?id=401961&img=bg2c.png)
030-300390 Rev. A Draft 3 44 January 2004
VersaLink™ Small Business Router
User Guide
STOP! After you disable Single Static IP, you must reboot your computer.
12.1.3 Configuring Static IP on Your PC
If you have static IP service (your Internet Service Provider [ISP] supplies static IP addresses), you will need to
perform the following steps to obtain Internet access:
1. Configure your PC settings to obtain an IP address automatically. (Refer to your Windows Help screen for
instructions.)
2. Follow the instruct ions in section 7 (Configuring VersaLink™ for Internet Connection).
3. View the settings at the VPI/VCI screen (section 7). The values should read 0 (for VPI) and 35 (for VCI). If you
type any other value in the fields and click on next, you will lose your DSL connection. The connection cannot
be restored until the VPI/VCI is set to 0/35.
4. Select the Configuration menu, and then select Advanced WAN > VC.
5. Click on the edit button in the row that displays the VPI/VCI equal to 0/35. The VC 1 Configuration screen
will be displayed.
6. Select Bridge from the list of Protocol options. Next, under the VC 1 Bridge Settings, select Routed Bridge as
the Mode.
![](/img.php?id=401961&img=bg2d.png)
030-300390 Rev. A Draft 3 45 January 2004
VersaLink™ Small Business Router
User Guide
7. Disable DHCP Client (if enabled) by clicking on the Disable radio button adjacent to DHCP Client.
8. Replace the addresses in the fields labeled IP address, Subnet Mask, VersaLink, DNS Primary, and DNS
Secondary with the addresses you obtained from your Internet service provider.
9. Click on the set VC button.
10. Click on OK in the VC Configuration pop-up screen.
11. Click on OK in the reset modem pop-up screen.
After you complete the preceding steps, VersaLink will be reconfigured and your new settings will take effect. After
VersaLink has been reset, confirm that you have a DSL sync and that your PPP session displays UP before
continuing VersaLink’s configuration.
12.2 Service Configuration
The following settings will be displayed if you select Services from the Configuration menu.
Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on VersaLink are
open and that the required application traffic can pass through your LAN. For a list of supported services, go to
section 16 (NAT Services).
Current Profile Displays the NAT (Network Address Translation) services that you have
selected.
Service Name Drop down selection menu of NAT (Network Address Translation) service you
can select to configure you VersaLink.
![](/img.php?id=401961&img=bg2e.png)
030-300390 Rev. A Draft 3 46 January 2004
VersaLink™ Small Business Router
User Guide
12.2.1 Adding NAT Services to a Profile
This section explains how to add NAT services to your NAT service profile. Remember, you may attach an
unlimited number of NAT services to your profile.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By
selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on
VersaLink are open and that the required application traffic can pass through your LAN. For a list of supported NAT
services, go to section 16 (NAT Services).
To add a NAT service, select Services from the Configuration menu. Next, Select a NAT service from the options
provided at the Service Name drop-down arrow and click on enable.
If you clicked on enable, the following Host Service screen will be displayed. Click on OK. This will load the new
NAT Configuration and the settings will be saved automatically.
If you clicked on OK in the preceding pop-up screen, the Host Device screen will be displayed. The Host Device
screen will allow you to select which device will host the NAT service you selected on your local area network. You
![](/img.php?id=401961&img=bg2f.png)
030-300390 Rev. A Draft 3 47 January 2004
VersaLink™ Small Business Router
User Guide
must either select the device from the Host Device drop-down arrow or type an IP address in the field labeled IP
Address. Click on done.
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to
your profile, you must first select the new NAT service. Then, you must load the new NAT Configuration, as
explained earlier in this section.
Once you have selected a NAT service and you have saved it to your NAT service profile, the following screen will
be displayed. It shows which NAT service is active for the selected profile.
![](/img.php?id=401961&img=bg30.png)
030-300390 Rev. A Draft 3 48 January 2004
VersaLink™ Small Business Router
User Guide
If you select the details button in the Service Configuration screen, the following screen will display the details of
the selected NAT service. If you click on the delete button in the Service Configuration screen, you will remove
that NAT service from your NAT service profile. Click on close to continue.
NOTE: If you would like to set up additional Advanced Service Configuration options, refer to section 13 (Setting
Up Advanced Service Configuration).
12.2.2 Creating a New NAT Service Profile
If you select new from the preceding Service Configuration screen, the Create new Service Profile? pop-up
screen will be displayed. Click on OK to begin creating your new NAT service profile. Click Cancel if you do not
want to create a new NAT service profile.
If you clicked on OK, the following screen will be displayed. Select “A New Service Profile #1” from the
Current Profile drop-down arrow.
NOTE: You may create up to four NAT profiles and attach an unlimited number of services to each profile.
![](/img.php?id=401961&img=bg31.png)
030-300390 Rev. A Draft 3 49 January 2004
VersaLink™ Small Business Router
User Guide
If you selected “A New Service Profile #1” from the Current Profile drop-down arrow, the following screen will
be displayed. This screen shows that you have chosen to create a new NAT service profile. You may create up to
four NAT service profiles and attach an unlimited number of services to each profile.
![](/img.php?id=401961&img=bg32.png)
030-300390 Rev. A Draft 3 50 January 2004
VersaLink™ Small Business Router
User Guide
12.2.3 Editing a NAT Service Profile
Once you have created a NAT service profile, you may edit the profile. If you select edit from the Service
Configuration screen, the following screen will be displayed. By selecting the edit button, you can make changes to
your NAT profile by adding or deleting NAT applications that will work with VersaLink. Type your new NAT
service profile name into the field labeled Profile Name.
The following screen shows that a new profile name called ‘My NAT Profile’ was entered into the Profile Name
field. If you want save the new NAT profile, click on save. If you do not want to save the new NAT profile, click on
close.
![](/img.php?id=401961&img=bg33.png)
030-300390 Rev. A Draft 3 51 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked on save in the Edit NAT Profile screen, the following pop-up screen will be displayed. Click OK to
save your new profile settings. If you click on Cancel, your new profile settings will not be saved.
The following screen displays the current profile. If desired, you may create a new profile and delete or edit an
existing profile.
NOTE: You may create up to four NAT profiles and attach an unlimited number of services to each profile.
![](/img.php?id=401961&img=bg34.png)
030-300390 Rev. A Draft 3 52 January 2004
VersaLink™ Small Business Router
User Guide
12.3 Firewall Configuration
The following settings will be displayed if you select Firewall from the Configuration menu.
High High security level only allows basic Internet functionality. Only Mail, News, Web, FTP, and
IPSEC are allowed. All other traffic is prohibited.
Medium Factory Default = MEDIUM
Like High security, Medium security only allows basic Internet functionality by default. However,
Medium security allows customization through NAT configuration so that you can enable the traffic
that you want to pass.
Low The Low security setting will allow all traffic except for known attacks. With Low security,
VersaLink is visible to other computers on the Internet.
None Firewall is disabled. (All traffic is passed)
Custom Custom is an advanced configuration option that allows you to edit the firewall configuration
directly. NOTE: only the most advanced users should try this.
If you select Edit from the Security Level screen, the User Defined Firewall Rules screen will be displayed. This
screen allows you to change the security parameters on your Inbound and Outbound Firewall rules via the User
Defined Firewall Rules drop-down arrow. If you select Inbound, this will restrict inbound traffic from the WAN to
the LAN. Outbound restricts outbound traffic to the WAN from the LAN. To apply the new settings, click Apply in
the screen labeled User Defined Firewall Rules.
NOTE: Westell recommends that you do not change the settings in the User Defined Firewall Rules screen. If you
need to reset VersaLink to factory default settings, push the reset button on the rear of VersaLink.
![](/img.php?id=401961&img=bg35.png)
030-300390 Rev. A Draft 3 53 January 2004
VersaLink™ Small Business Router
User Guide
The information displayed in the following screen depends upon the Firewall security setting you have selected. If
you selected “None” in the preceding Firewall Security Level screen, no values will be displayed in the following
User Defined Firewall Rules screen.
If you clicked Apply in the User Define Firewall Rules screen, the following pop-up screen will be displayed.
Click on OK if you want your new firewall setting to take effect. If you click on Cancel, your new firewall settings
will not take effect.
If you want to save your new firewall settings, click on save in the screen labeled User Define Firewall Rules.
NOTE: Westell recommends that you do not change the settings in the User Defined Firewall Rules screen. If you
need to reset VersaLink to factory default settings, push the reset button on the rear of VersaLink.
Note: The information displayed in this screen
depends on the level of security you have selected.
![](/img.php?id=401961&img=bg36.png)
030-300390 Rev. A Draft 3 54 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked save in the User Define Firewall Rules screen, the following pop-up screen will be displayed. Click
OK when asked Do you wish to save these Rules to Flash and switch you Security Level to “User”? This will
save your new firewall settings. If you click Cancel, your new firewall settings will not be saved.
Note: The information displayed in this screen
depends on the level of security you have selected.
![](/img.php?id=401961&img=bg37.png)
030-300390 Rev. A Draft 3 55 January 2004
VersaLink™ Small Business Router
User Guide
If you select Help in the screen labeled User Defined Firewall Rules, the following screen will be displayed. This
screen gives a detailed explanation of the Firewall Rules.
![](/img.php?id=401961&img=bg38.png)
030-300390 Rev. A Draft 3 56 January 2004
VersaLink™ Small Business Router
User Guide
12.4 Wireless Configuration
The following fields will be displayed if you select Wireless from the Configuration menu.
IMPORTANT: If you are connecting to VersaLink via a wireless network adapter, the SSID must be the same for both
the Westell VersaLink and your PC’s wireless network adapter. The default SSID for VersaLink is the serial number of
the unit (located below the bar code on the bottom of the unit and also on the Westell shipping carton). Locate and run
the utility software provided with your PC’s Wireless network adapter and enter the SSID value. The PC’s wireless
network adapter must be configured with the SSID (in order to communicate with VersaLink) before you begin
VersaLink’s account setup and configuration procedures. For privacy, you may change the Network Name (SSID)
value in the Wireless Configuration screen to your desired value.
NOTE: Client PCs can use any Wireless Fidelity (Wi-Fi) 802.11b/g/g+ certified card to communicate with
VersaLink. The Wireless card and VersaLink must use the same Wired Equivalent Privacy (WEP) security code
type. The factory default for WEP is DISABLED. If you enable WEP, you must ensure the network setting for your
wireless adapter is set to “Must Use Shared Key for WEP” or “Open Wi-Fi.” You must ensure that your PC’s Wi-Fi
adapter is configured properly for whichever network setting you use. You can access the settings in the advanced
properties of the wireless network adapter.
To select a network setting, click on the drop-down arrow at the field labeled Authentication Type, and then select
either Open System or Shared Key. If you change any settings in this screen, you must click on the Save button to
ensure that the settings take effect.
NOTE: For privacy, you may change the Network Name (SSID) value to your desired value.
![](/img.php?id=401961&img=bg39.png)
030-300390 Rev. A Draft 3 57 January 2004
VersaLink™ Small Business Router
User Guide
Wireless Card Information
Wireless Operation Factory Default = Enabled.
When disabled, no stations will be able to connect to the VersaLink.
Network Name (SSID) This string, (32 characters or less) is the name associated with the AP. To connect to
the AP, the SSID on a Station card must match the SSID on the AP card or be set to
“ANY.”
Channel The AP transmits and receives data on this channel. The number of channels to
choose from is pre-programmed into the AP card. Station cards do not have to be set
to the same channel as the AP; the Stations scan all channels, and look for an AP to
connect to.
Mode This setting allows station to communicate with VersaLink.
Possible Responses:
Mixed: Station using any of the 802.11b, 802.11b+, and 802.11g rates can
communicate with VersaLink.
11b only: Communication with VersaLink is limited to 802.11b
11b+: Stations using any of the 802.11b and 802.11b+ rates can communicate with
VersaLink
11g only: Communication with VersaLink is limited to 802.11g
4x Support Factory Default = Disabled
When selected, this enables/disables the 4X.
If enabled, 4X support provides additional algorithms for increased throughput.
Advanced Configuration Selecting this button allows access to the Wireless Advanced Configuration settings.
Privacy Settings
Authentication Type Factory Default = Open System
Possible Response:
Open System: Open System authentication is the default selection.
Shared Key: To use Shared Key authentication, WEP must be enabled, and a valid
WEP key must be present. Enabling WEP does not force the use of Shared Key
authentication. It is permissible to have WEP enabled and still use Open System
authentication.
WEP Security WEP
Security
WEP (Wired Equivalent Privacy)
Factory Default=DISABLED
The AP card supports 64-bit, 128-bit, or 256-bit WEP encryption. If WEP is
disabled, any station can connect to the AP (as long as its SSID matches the AP
SSID).
IF WEP is enabled, the risk of someone nearby accessing the AP is minimized.
Key Select If selected, the WEP Key is treated as a string of text characters, and the number of
characters must be either 5 (for 64-bit encryption) or 13 (for 128-bit encryption) or
29 (for 256-bit encryption). If not selected, the WEP key is treated as a string of
hexadecimal characters, and the number of characters must be either 10 (for 64-bit
encryption), 26 (for 128-bit encryption), or 58 (for 256-bit encryption). The only
allowable hexadecimal characters are 0-9 and A-F.
NOTE: The WEP key must be the same value and type for both Versa Link and the
wireless network adapter. “Pass Phrase” is not the same as “text” and should not be
used.
Key Mapping Table button Selecting this button will allows access to the Wireless Key Mappings settings.
Hide SSID Factory Default = Disabled.
If Enabled, stations will need to set the SSID to match the Network Name (SSID) in
order to connect to Versa Link.
MAC Address Filtering Factory Default = Disabled.
If Enabled, only the stations in the MAC Filter Table can connect to Versa Link.
MAC Filter Table button Selecting this button allows access to the Wireless MAC Address Filter Table.
![](/img.php?id=401961&img=bg3a.png)
030-300390 Rev. A Draft 3 58 January 2004
VersaLink™ Small Business Router
User Guide
12.4.1 Wireless Advanced Configuration
The following screen will be displayed if you click on the Advanced Configuration button in the Wireless
Configuration screen.
Beacon Period The time interval between beacon frame transmissions. Beacons contain rate and
capability information. Beacons received by stations can be used to identify the
access points in the area.
RTS Threshold RTS/CTS handshaking will be performed for any data or management MPDU
containing a number of bytes greater than the threshold. If this value is larger than
the MSDU size (typically set by the fragmentation threshold), no handshaking will
be performed. A value of zero will enable handshaking for all MPDUs.
Fragmented Threshold Any MSDU or MMPDU larger than this value will be fragmented into an MPDU of
the specified size.
Preamble Algorithm Factory Default = Local STA’s
Possible Responses:
Always Long: Transmissions are done using the long preamble algorithm.
Always Short: Transmissions are done using the short preamble algorithm.
Local STA’s: If all associated stations support short preamble, then the short
preamble algorithm is used. Otherwise, the long preamble algorithm is used.
Slot Time Algorithm Factory Default = Local STA’s
Possible Response:
Always Off: Transmissions are done using a 20 usec slot time.
![](/img.php?id=401961&img=bg3b.png)
030-300390 Rev. A Draft 3 59 January 2004
VersaLink™ Small Business Router
User Guide
Always ON: Transmissions are done using a usec slot time (SST).
Local STA’s: If all associated stations support SST, then the 9 usec slot time is used.
Otherwise, the 20 uses slot time is used.
Enhanced Dynamic: Similar to Local STA’s, with the following extension: If
associated stations that do not support SST do not transmit for a period of time, the 9
usec slot time is used.
PBCC Algorithm Factory Default = Enhanced Dynamic
Possible Response:
Always Off: PBCC is not used, operation at 22 Mbps is not possible.
Always ON: PBCC is used.
Local STA’s: If all associated stations support PBCC, then PBCC is used.
Otherwise, PBCC is not used.
Dynamic: Similar to local STA’s with the following extension: PBCC setting is also
dependent on Beacon frames from overlapping BSS. If Beacon frames are received
that do not support PBCC, then PBCC is not used.
Enhanced Dynamic: Similar to Dynamic with the following extension: If associated
stations that do not support PBCC do not transmit for a period of time, then PBCC is
not used.
ERP Protection Algorithm Factory Default = Dynamic
Possible Response:
Always Off: ERP is not used
Always ON: ERP is used.
Local STA’s: If there are any associated stations than do not support ERP, a
protection algorithm is used to prevent contention.
Dynamic: Similar to local STA’s with the following extension: The ERP protection
setting is also dependent on Beacon frames from overlapping BSS. IF Beacon
frames are received that indicate ERP is not supported, then a protection algorithm is
used.
Enhanced Dynamic: Similar to Dynamic with the following extension: If associated
stations that do not support ERP do not transmit for a period of time, then protection
algorithm is not used.
Rate Adaptation Factory Default = Enable
If disabled, the highest rate shared between VersaLink and STA is used for each
transmission.
Rate Fallback Factory Default = After 1 Retry
The number of retries to attempt before falling back to the next lower rate. If
Fallback is disabled, the starting rate is the only rate tried. IF Rate Adaptation is also
disabled, the maximum rate shared with the STA is always the starting rate and the
only rate tried. This may not work in noisy environments, and will reduce roaming
distances.
Possible Response: After 1 Retry/ Disable/ After 1 Retry/ After 2 Retry
802.11b Rates (Mbps)
802.11g Rates (Mbps) These are the allowable communication rates that VersaLink will attempt to use. The
rates are also broadcast within the connection protocol as the rates supported by
VersaLink.
![](/img.php?id=401961&img=bg3c.png)
030-300390 Rev. A Draft 3 60 January 2004
VersaLink™ Small Business Router
User Guide
12.4.2 Wireless Key Mappings
The following screen will be displayed if you click on the Key Mapping Table button in the Wireless
Configuration screen.
WEP Key Select Enable is you want this WEP key enabled for the listed MAC Address.
MAC Address The MAC address assigned to the station for which you want to assign a WEP key.
Key Length The number of bits the encryption is going to use for WEP. The options are 64, 128,
or 256 bits.
Key Value The WEP key to be used for this station.
![](/img.php?id=401961&img=bg3d.png)
030-300390 Rev. A Draft 3 61 January 2004
VersaLink™ Small Business Router
User Guide
12.4.3 Wireless Filter Table
The following screen will be displayed if you click on the MAC Filter Table button in the Wireless Configuration
screen.
Traffic Allowed: When the MAC Filter is enabled, only stations in the MAC Filter Table
(which are set to “Allowed”) will have access to the AP.
Blocked: This allows the station to remain in the table, but no access to the
VersaLink is allowed.
MAC Address The MAC address assigned to the station that you want to Allow access to.
Station Name The station name or description that the MAC address is assigned to. This is an
optional field that is useful in identifying the station.
![](/img.php?id=401961&img=bg3e.png)
030-300390 Rev. A Draft 3 62 January 2004
VersaLink™ Small Business Router
User Guide
12.5 Advanced LAN
This section explains the configurable features of VersaLink that are available if you select Advanced LAN from
the Configuration menu.
12.5.1 DNS Configuration
The following settings will be displayed if you select DNS from the Advanced LAN menu.
![](/img.php?id=401961&img=bg3f.png)
030-300390 Rev. A Draft 3 63 January 2004
VersaLink™ Small Business Router
User Guide
User Assigned DNS
Domain Name
NOTE: Some ISP’s may
require the name for
identification purposes.
This field allows you to enter a Domain Name for VersaLink.
To add a Domain Name, in the field under User Assigned DNS, type in your
new domain name and click Set.
Static Host Assignment
Host Name This field allows you to enter a HOST name for VersaLink.
To add a new Host name, in the field under Static Host Assignment, type in the
Host Name and the IP address and click Set.
IP Address Displays the IP address that is assigned to the Host Name.
Discover Local Devices
This field displays a list of the computers on the LAN that were assigned a DHCP Address. The computer
name, MAC address, and IP address of each discovered device is displayed.
If you want to add a new Host Name and IP address to your DNS server, enter VersaLink’s Host Name and IP
Address in the fields provided in the Static Host Assignment section.
The following screen displays a Host Name and an IP Address in the fields. Now click on add.
![](/img.php?id=401961&img=bg40.png)
030-300390 Rev. A Draft 3 64 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked on add, the following screen will be displayed. The Host Name and IP Address have been added to
the Static Host Assignment.
![](/img.php?id=401961&img=bg41.png)
030-300390 Rev. A Draft 3 65 January 2004
VersaLink™ Small Business Router
User Guide
12.5.2 DHCP Configuration (Private LAN)
The following settings will be displayed if you select DHCP from the Advanced LAN menu.
DHCP Server This setting allows VersaLink to automatically assign IP addresses to local
devices connected on the LAN. Westell advises setting this to enabled for the
private LAN.
Off = DHCP Server is disabled
Private LAN = DHCP addresses will be saved into the Private LAN
configuration.
Public LAN = DHCP addresses will be saved into the Public LAN
configuration. This option is only available if the Public LAN DHCP server is
enabled.
NOTE: These addresses will be overwritten if the Internet Service Provider
supports dynamic setting of these values.
DHCP Start Address Factory Default = 192.168.1.15
This field displays the first IP address that the DHCP server will provide. The
DHCP Start Address must be within the IP address and lower than the DHCP
End Address. You may use any number from 0 to 254 in this address.
DHCP End Address Factory Default = 192.168.1.47
This field displays the last IP address that the DHCP server will provide. The
DHCP End Address must be within the IP address and higher than the DHCP
Start Address. You may use any number from 0 to 254 in this address.
![](/img.php?id=401961&img=bg42.png)
030-300390 Rev. A Draft 3 66 January 2004
VersaLink™ Small Business Router
User Guide
DHCP Lease Time Factory Default = 01:00:00:00
Displays the amount of time the provided addresses will be valid, after which
the DHCP client will usually re-submit a request.
NOTE: DHCP Lease Time is displayed in the format (dd:hh:mm:ss)*. This
value must be greater than 10 seconds. Seconds must be between 0 and 59,
minutes must be between 0 and 59, and hours must be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds)
12.5.3 Disabling the DHCP Server
If you click on the drop-down arrow at DHCP Server:, a list of options will be displayed.
If you want to disable your DHCP server, select Off from the DHCP Server drop-down arrow. Click on save.
If you selected Off at DHCP Server:, the following screen will be displayed. Click on save to save the DHCP
Server setting.
![](/img.php?id=401961&img=bg43.png)
030-300390 Rev. A Draft 3 67 January 2004
VersaLink™ Small Business Router
User Guide
If you clicked on save, in the preceding DHCP Configuration screen, the following pop-up screen will appear.
Click on OK.
![](/img.php?id=401961&img=bg44.png)
030-300390 Rev. A Draft 3 68 January 2004
VersaLink™ Small Business Router
User Guide
12.5.4 Enabling the DHCP Server
If you want to enable your DHCP Server settings, select Private LAN at the DHCP Server drop-down arrow.
If you have recently disabled the DHCP Server for Private LAN, select Private LAN while in the following screen.
![](/img.php?id=401961&img=bg45.png)
030-300390 Rev. A Draft 3 69 January 2004
VersaLink™ Small Business Router
User Guide
If you selected Private LAN, the following screen will be displayed automatically. Click on save to save your
DHCP Server setting. If you click on reset, your DHCP Server will be reset to factory default. (Private LAN is the
factory default for the DHCP Server.)
If you clicked on save, the following pop-up screen will appear. Click on OK.
![](/img.php?id=401961&img=bg46.png)
030-300390 Rev. A Draft 3 70 January 2004
VersaLink™ Small Business Router
User Guide
12.5.5 Private LAN Configuration
The following settings will be displayed if you select Private LAN from the Advanced LAN menu. (Private LAN
is the default configuration for this VersaLink.)
NOTE: Private LAN allows you to set up a network behind VersaLink.
If you change the settings in this screen, click on save. If you click on reset, the changes will not take effect.
If you made changes and clicked on save, the following pop-up screen will be displayed. Click on OK. This will
save your Private LAN Configuration settings. If you click Cancel, your new settings will not take effect.
Private LAN DHCP Server Enable Default = CHECKED
If this box is CHECKED, it enables DHCP addresses to be served
from the Private LAN pool.
Private LAN Enable Default = CHECKED
If this box is CHECKED, it enables the addresses from the Private