Zhongshan K mate General Electronics BTT009 Bluetooth Transmitter and Receiver with Docking Station User Manual 1 User s manual 2010 12 06
Zhongshan K-mate General Electronics Co., Ltd Bluetooth Transmitter and Receiver with Docking Station 1 User s manual 2010 12 06
Users Manual
![BTT009 Before use……………………………………………………..1 1. About BTT009……………………………………………………..1 2. System requirements…………………………………………….…1 3. Overview……………………………………………….…………..1 Getting started………………………………………………..2 1. Charging the battery of BTT009…………………….……………..2 TX Mode……………………………………………………...2 1. Switching on/off the transmitter……………………………...……2 2. Pairing with a Bluetooth device……………………………………3 3. Reconnecting to a Bluetooth device………………………………..4 4. Auto-off…………………………………………………………….4 5. Clearing pairing list………………………………………………...4 6. LED indicator…………………………………………….………...4 RX Mode……………………………………………………...5 1. Switching on/off the receiver……………………….………...……5 2. Pairing with a Bluetooth device……………………………………5 How to enter pairing mode………………………………………...5 Pairing with a Bluetooth cell phone……………………………….5 3. Listening to music………………………………………………….6 4. Reconnecting to a Bluetooth device………………………………..6 5. Auto-off…………………………………………………………….6 6. Clearing pairing list………………………………………………...7 7. LED indicator…………………………………………….…….…..7 Care and maintenance……………………………………….7 FAQs………………………………………………………..…7 Specifications………………………………………..………..8 Bluetooth Transmitter and Receiver with docking station](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-1.png)
![read this user’s manual carefully before use. Before use 1. About BTT009 Bluetooth transmitter, it can be connected to your walkman or PC to wirelessly transmit the music to your Bluetooth stereo receiver (Such as Bluetooth stereo headset, Bluetooth stereo speaker and so on). When it is used as a Bluetooth receiver, it can be connected to your common stereo receiver for wireless playing music from your Bluetooth audio player. 2. System requirements a) When BTT009 is used as a Bluetooth transmitter, you need to prepare a audio player with 3.5mm audio-out jack and a Bluetooth A2DP receiver, such as Bluetooth stereo headset, Bluetooth stereo speaker and so on. b) When BTT009 is used as a Bluetooth receiver, you need to prepare a stereo receiver with 3.5mm audio-in jack and a Bluetooth A2DP transmitter, such as Bluetooth cell phone, Bluetooth MP3 and so on. 3. Overview 1 Multi-function button (MFB): Switching on/off, pairing 43.5mm audio jack 2 Charging jack 5TX/RX switch 3 LED indicator 63.5mm to 3.5mm audio cable 1 Welcome to use this Bluetooth transmitter and receiver with docking station,BTT009. PleaseBTT009 is a Bluetooth transmitter and receiver with docking station.When itis used as a](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-2.png)
![ Getting started 1. Charging the battery of BTT009 BTT009 comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When BTT009 is low power, red LED flashes. Please recharge the battery of BTT009. Connect the charger to a standard power outlet and the charger plug to the charging jack of BTT009. Red LED is on while charging. It takes about 3 hours to charge the battery fully. When charging is completed, red LED will be off. Note: Please don’t attempt to take out battery from BTT009, in case of damaging BTT009. Warning: 1) The battery is recyclable. 2) Do not dispose of the battery in fire, as it may cause explosion. TX Mode Selecting mode: Please turn the TX/RX switch to TX mode before switching on BTT009. Note: TX or RX mode can not be changed after switching on BTT009. 1. Switching on/off the transmitter Function Operation LED indicator Switching on transmitter Press button for 3-4 seconds Blue LED is on for 1second Switching off transmitter Press button for 3-4 seconds Red LED is on for 1 second and then off 2](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-3.png)
![2. Pairing with a Bluetooth device After the transmitter connecting to a Bluetooth stereo receiver, you can enjoy music wirelessly. Before pairing, please make sure your Bluetooth stereo receiver supports Bluetooth A2DP profile. The pairing steps are as follows: 1) Make sure the transmitter is off, otherwise switch it off; 2) Keep the transmitter and your Bluetooth stereo receiver within 1 meter; 3) Switch on your Bluetooth stereo receiver and make it enter pairing mode; 4) Press and hold MFB button of the transmitter for 5~7 seconds and do not release it until red and blue LEDs flash alternately, at this time, the transmitter entered pairing mode; 5) The transmitter will automatically search for Bluetooth stereo receiver and finish connection; 6) After successful connecting, blue LED of the transmitter flashes twice every 4 seconds; 7) Connect the transmitter to your music player through 3.5mm audio jack to play music. Notes: The pairing mode will last 2 minutes. The transmitter will enter standby mode if no devices can be connected within 2 minutes. The transmitter can pair with a Bluetooth stereo receiver whose PIN NO.. is “0000”, “1234”or “1111”, “8888”. 3](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-4.png)
![3. Reconnecting to a Bluetooth device 1) Automatic connecting Every time the transmitter is switched on, it will automatically connect to last connected device. 2) Manual connecting When the transmitter is in standby mode and doesn’t connect to any devices, short press button once, it will automatically connected to last connected device. 3) Can be connected In addition, when the transmitter is in standby mode and doesn’t connect to any devices, it can accept the connecting request sent by the receiver that have paired with the transmitter before. 4. Auto-off The transmitter will automatically switch off if no devices can be connected within 5 minutes. 5. Clearing pairing list Make sure the transmitter is off, press and hold button for about 10 seconds, and don’t release it until red LED is on for 1 second and then blue LED is on for 1 second. 6. LED indicator LED indicator Status of the transmitter Blue LED flashes continuously Pairing mode Blue LED flashes once every 1 second Standby mode and not connected to a device Blue LED flashes twice every 4 seconds Connected to a device Red LED flashes Low power 4](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-5.png)
![ RX Mode Selecting mode: Please turn the TX/RX switch to RX mode before switching on BTT009. Note: TX or RX mode can not be changed after switching on BTT009. 1. Switching on/off the receiver Function Operation LED indicator Switching on receiver Press button for 3-4 seconds Blue LED is on for 1 second Switching off receiver Press button for 3-4 seconds Red LED is on for 1 second and then off 2. Pairing with Bluetooth devices How to enter pairing mode Function Operation Entering pairing mode Make sure the receiver is off, press and hold button for about 5~7 seconds, and do not release it until red and blue LEDs flashes alternately Note: The pairing mode will last 2 minutes. The receiver will automatically switch to standby mode if no devices can be connected within 2 minutes. Pairing with a Bluetooth cell phone Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different models of cell phones. Please refer to your cell phone’s user’s manual for further information. The general pairing steps are as follows: 1) Keep the receiver and Bluetooth cell phone within 1 meter when pairing; 2) Enter the receiver’s pairing mode (refer to “How to enter pairing mode”); 3) Active your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range. After the search is completed, select “BTT009” from the list of devices shown; 4) According to the indication, enter password or PIN No:“0000”; 5) If prompted by your cell phone to connect, select “Yes”; 6) After successful connecting, blue LED of the receiver will flash twice every 4 seconds. 5](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-6.png)
![Notes: If the pairing is failed, please switch off the receiver and re-pair according to steps 1~6 mentioned above. After pairing is successful, the receiver and the cell phone will remember each other, they will no need to re-pair next time. The receiver can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced. Every time the receiver is switched on, it will connect to the last connected device automatically. If you want to pair it to other devices, please turn off the current device’s Bluetooth function first and try to pair the receiver to the new device according to steps 1~6 mentioned above. 3. Listening to music When BTT009 is used as a receiver, you can connect it to a 3.5mm stereo headset or stereo speaker with a 3.5mm to 3.5mm audio cable. Now you can listen to music and control pause/play of music. Function Status of the receiver Operation Pause Playing music Short press button once Play Pausing Short press button once 4. Reconnecting to a Bluetooth device 1) Automatic connecting Every time the receiver is switched on, it will automatically connect to last connected device. 3) Manual connecting When the receiver is in standby mode and doesn’t connect to any devices, short press button once, it will automatically connected to last connected device. 5. Auto-off The receiver will automatically switch off if no devices can be connected within 5 minutes. 6](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-7.png)
![6. Clearing pairing list Make sure the receiver is off, press and hold button for about 10 seconds, and don’t release it until red LED is on for 1 second and then blue LED is on for 1 second. 7. LED indicator LED indicator Status of the receiver Red and blue LEDs flash alternately Pairing mode Blue LED flashes once every 1 second Standby mode and not connected to a device Blue LED flashes twice every 4 seconds Connected to a device Red LED flashes Low power Care and maintenance Before using BTT009, please read the following recommendations, it will help you to enjoy the product for many years. Do not expose the product to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Do not expose the product to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don’t use abrasive cleaning solvents to clean the product. Don’t dispose of the product in a fire as it will result in an explosion. Don’t expose the product to contact with sharp objects as this will cause scratches and damage. Don’t let the product fall down onto the floor. The internal circuit might get damaged. In case the headset doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem. FAQs 1. What to do when BTT009 can’t be switched on? Please charge it. 7](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-8.png)
![2. What to do when BTT009 can’t pair and connect to a Bluetooth device? 1) Make sure Bluetooth stereo receiver supports A2DP; 2) Make sure Bluetooth stereo receiver is placed within 5 meters; 3) Make sure Bluetooth stereo receiver has already entered into pairing mode. 3. What to do when BTT009 can’t be switched off? Please charge it for about 2 seconds. Specifications Bluetooth specification Bluetooth V2.1 Bluetooth profiles A2DP and AVRCP Frequency range 2.402GHz-2.480GHz Operating distance Up to 10 meters Charging input voltage DC 5V TX: Up to 11 hours Working time RX: UP to 6 hours Charging time About 3 hours Dimensions 51.4×34.7×8.6mm Weight 48.5g Notes: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 8](https://usermanual.wiki/Zhongshan-K-mate-General-Electronics/BTT009/User-Guide-1537006-Page-9.png)