nextbike NXTBFVM2 Boardcomputer with card reader User Manual 150129 Manual Boardcomputer Final
nextbike GmbH Boardcomputer with card reader 150129 Manual Boardcomputer Final
nextbike >
User Manual
Nextbike GmbH Nextbike Boardcomputer Instruction Manual 13.01.2015 Read me first o Before using the device, please read the entire manual and all safety instructions to ensure safe and proper use. o The descriptions in this manual is based on the default settings of the device. o The images and screenshots used in this manual may differ from the actual product. o The contents of this manual may differ from the product, or from software provided, software versions are individually created based on the requirements of the particular bicycle rental system. o Formatting and delivery of this manual is based on nextbike operating systems. o Functions of this boardcomputer may be different from those provided with the bicycles - functions vary by region or hardware specifications. o Please keep this manual for future reference. Copyright © 2014 nextbike GmbH This manual is protected under international copyright laws. No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of nextbike GmbH. Table of contents 1. Summary .............................................................................................................................................................. 3 2. Applications ......................................................................................................................................................... 3 3. Hardware Description .......................................................................................................................................... 3 4. Functional Description ......................................................................................................................................... 8 5. Specification ....................................................................................................................................................... 10 6. Usage ................................................................................................................................................................. 10 7. GPS Usage .......................................................................................................................................................... 12 8. Cautions ............................................................................................................................................................. 12 9. FCC Statement ................................................................................................................................................... 13 1. Summary The nextbike on-boardcomputer is integrated into the nextbike smart bike. This onboardcomputer enables the customers to rent and return smart bikes directly through its interface via Smart Card and mobile number including PIN code, automating the release and lock process for all registered customers. Customers without Smart Cards or personal log in information also have the choice to activate the rental via App or phone call to the IVR-service hotline. Furthermore, the system is connected to the nextbike Office Software via existing GSM/GPRS network and GPS satellites, which permits locating and monitoring bicycle in real time on kiosk terminals, App or calling the IVR-service hotline. 2. Applications o Bicycle rental/return o Bicycle tracking 3. Hardware Description 3.1 Nextbike’s components: On the bike a boardcomputer (above the rear wheel) and a lock unit (at the front) is mounted, which are connected by a 2-pin cable. The lock unit contains a motor for locking a bar and two switches for detecting an inserted bar and the motor end position. Apart from that, the boardcomputer is connected to the generator parallel to the two lamps of the bicycle. The lock unit FVML is encapsulated in a plastic housing board. The built-in components and connections are clearly in Figure 2. The boardcomputer FVM2 consists of two PCBs (base PCB and antenna PCB) that are connected by an 8 pin ribbon cable and inserted into a housing. The structure is shown in Figure 1. On the bottom side of the housing a 4-pin connector is screwed, which is soldered to the base PCB. So the generator and the lock unit can be connected. Besides boardcomputer includes the following main components: A 10-number keyboard to wake up the system and to enter information (codes, ID numbers and pins) A RFID-Reader to wake up the system and to read customer cards A display and LEDs to show status, lock codes and other information A speaker for key feedback and alert tones A GSM module for communication with central server A WPAN-module (Synapse SM200) for local data exchange with the terminal o A boost converter and a high side switch for supplying the lock unit A power supply unit including battery A Microcontroller with serial data flash memory The system is supplied by an on-board battery that is charged by the bicycle generator. Cautions: A. Are developed with particular focus on vandalism and weather resistance (temperature range between 14 °F and 122 °F). B. Are developed for energy efficiency. As a standard the boardcomputer rests in sleep modus. With activating the unit via numeric key-pad the unit wakes up for seconds if no other activity is recognized. The boardcomputer is designed to operate without any recharging for several weeks. One ride per week of 15-30 minutes will be sufficient to recharge the battery to 100%. C. The units are fixed in the upper cover of the back wheel. D. The electric components are covered by a waterproof glued acrylic box. E. Please maintain a minimum distance of 20 cm from the antenna. 3.2 Design Front Face Rear Face Interior Interior Front Face Interior Top Face Interior Bottom Face 3.3 Block Diagramm Cable Connector Female – WEiPU - SP1711/S4 ( IP Rating IP 68) 1. GND 2. +12V 3. GND 4. V-D 4. Functional Description 4.1 Powermanagement The boardcomputer mostly lingers in the sleep mode to reduce power consumption. The LED display is completely off during this time and the status LEDs indicate status cyclically by flashing. Waking up the system can happen from following wake up sources: Push a button Apply a RFID-Card Ride the bike Connect a fast charger Timer interrupt for central server via GSM-Call the boardcomputer from terminal via WPAN In operating mode control and display elements, acoustic feedback and communication are active. Depending on the Battery charge level the boardcomputer switch to a power saving mode. In this case, the system status is not indicated by the flashing LEDs. In addition, the device cannot wake up. Charging the batteries during riding the bicycle is controlled by the µC. The charge current depends on the speed of the bicycle, the Battery charge level and the ambient light. By connecting a fast charger (5V maximum voltage, current maximum 4A), the battery can be charged completely within about 20 minutes. During that the current charge status [%] is displayed. 4.2 Control and display In idle mode red or green LED blinking indicates, if the bike is available for a rental or not. Pushing a button or placing a customer card wakes up the system. After pushing a button, the customer is prompted to enter either the current lock code or phone number and pin. Entering the lock code directly leads to an opening of the lock. This happens if the customer has just temporarily parked the bike or the rent it another way (eg. mobile phone). By entering the phone number and pin, a client can authenticate similar to placing a customer card. This leads either to a query via WPAN, in internal memory or via GSM. Thus, the lock is only opened after appropriate approval by the central server or the successful check in the internal memory. If the user authenticates himself as a service employee, an appropriate message is displayed and a connection between boardcomputer and central server is established for exchanging data. For example, a new lock code can be transmitted. After every key press a short acoustic feedback sounds, after each RFID authentication a long one. After 1st key operation a message is displayed in the default language. Thereafter, a user specific language can be used. 4.3 Communication via GSM 4.3.1. Frequency band and access to the medium The communication between boardcomputer and central server is running via GSMband. The boardcomputer initiates a TCP connection to the central server, which is afterwards used for shipping messages in both directions. 4.3.2. Communication sequence Prior to establishing the communication the modem needs to be initialized. This is done via AT commands. After initiation of communication by the boardcomputer, the server is always the master. It sends requests, commands and data to the boardcomputer. The communication is terminated by the server or a timeout. 4.4. Communication via WPAN Unlike the communication via GSM local communication can also be initiated from the terminal. For this, the boardcomputer listens every 3 seconds on the bus. Accordingly, the terminal must send a burst for more than 3 seconds. After establishing the connection, the two communication paths are identical. 4.4.1. Encryption The data transfer is encrypted by AES128. 4.5. Position recognition via GPS After switching on the GSM modem, GPS position is queried. The transfer of the determined coordinates is initiated by the central server. 4.6. Data memory In the data memory of the boardcomputer customer data are stored. So after authentication in a very short time can be determined, whether the user is allowed to borrow the bike. Additionally an individual user language can be stored. If the user cannot be found in the internal database, a request is sent to the central server. With a positive response, the bike can be released. If data memory shall not be used, it just stays empty. Thus all data is automatically requested at the central server. 5. 6. Specification Content BC specification Dimensions 222 mm x 119 mm x 44 mm Weight 500 g Network GSM/GPRS/UMTS Band 850/900/1800/1900Mhz GPS Sensitivity -159dBm GPS Accuracy 5m Charging V 5V Charging A Battery 2.1 A Chargeable 3.2V 1100 mAh Li-ion battery Standby Approx. 960 hours Storage Temp. -40 °F to 140 °F Operation Temp. 1.4 °F to 131 °F Humidity 5%-95% non-condensing Usage 6.1 All components are already installed. 6.2 The battery charger is provided as a set. Content Charger specification Model No.: FPPS 5-10W PRI 100-240 V/AC 60/50 Hz, 350 mA SEC 5V/DC, 2100 mA, 10.5VA 10 6.3 Charger 6.3.1 Charging The battery level is displayed on the LCD and the charging process is completed when the display shows “99 PROZ.” If the battery level is not displayed within 10 seconds, unplug the charger and try again after 60 seconds. 6.3.2 On-bike Charging The charging cable is connected directly to the front dynamo hub of the smart bike and charges automatically while the bike is underway. CAUTIONS: A. The Li-ion battery contains harmful chemicals and may burst. Please don’t take care not use excessive force while handling the battery to prevent puncturing. Please keep the battery off fire. B. Please charge the battery in time to guarantee the highest performance. 6.3.3 Rental* There are two options utilizing the boardcomputer for bike rentals. 1. Via Smart Card: Holding the customer card onto the card reader on the boardcomputer. The boardcomputer sends a signal to the smart lock, releasing the lock. The boardcomputer displays “Rented.” 2. Via mobile number and PIN code: Pressing the a button to activate the boardcomputer. Entering mobile number and PIN code. The boardcomputer sends a signal to the smart lock, releasing the lock. The boardcomputer displays “Rented.” 11 6.4 Returning* Corresponding to the rental options, there are two options utilizing the boardcomputer for returning the bike. 1. Via Smart Card: o Holding the customer card onto the card reader on the boardcomputer. o The boardcomputer sends a signal to the smart lock. o The customer locks the bike by removing the cable from the holder at the basket and insert it into the left side of the bike fork. o A signal confirms successful return. o The boardcomputer displays “Successful Return.” 2. Via mobile number and PIN code: o Pressing the “OK-Button” to activate the boardcomputer. o Entering mobile number and PIN code. o Pressing the “OK-Button” for returning the bike. o The boardcomputer sends a signal to the smart lock, releasing the lock. o The boardcomputer displays “Successful Return.” *The rental and return are also possible via App, boardcomputer, kiosk terminal or by calling the IVR-service hotline. In addition, the rental and return procedures are individually programmed per bike scheme and may differ from the described process. 7. GPS Usage o The GPS location can be displayed in the nextbike Office Software. o Please log in to user account to locate the location of bikes on nextbike’s online location map. o The GPS settings are programed automatically and can’t be changed by users. 8. Cautions o Please comply with the instruction to maximize the unit life. o Keep the unit interior dry. Any liquid, i.e. rain, may destroy or damage the inside circuitry. o Don’t expose the unit to temperatures outside aforementioned temperature range. o Please handle the unit with care. Excessive vibration or shaking might damage the unit. o Clean the unit with a clean cloth, don’t use any chemicals or detergent. o Don’t disassemble or refit unit. o Please use charger provided by manufacturer only. Using other chargers might resolve in damaging the unit. 12 9. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 14 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 Producer : GPL Ghostscript 9.04 Keywords : () Modify Date : 2015:01:30 11:06:45+01:00 Create Date : 2015:01:30 11:06:45+01:00 Creator Tool : PDFCreator Version 1.2.3 About : 44698f4c-aac3-11e4-0000-183699327f0.�.�.2015-01-30T11:06:45+01:00 Document ID : uuid:44698f4c-aac3-11e4-0000-183699327f01 1(�c.. Format : application/pdf Title : 150129_Manual_Boardcomputer_Final Creator : juergen Description : () Author : juergen Subject :EXIF Metadata provided by EXIF.tools