2Wire Gateway Owners Manual Gateway_UG_5_29_21

2015-02-05

• Contents
• Introduction
• Networking Technology Overview
  • System Tab
• Viewing Your System Summary
  • Network at a Glance Panel
    • System Area of the Network at a Glance Panel
    • Broadband Link Area of the Network at a Glance Panel
    • Accessing the Broadband Link Summary Page
    • Launching the 2Wire Bandwidth Meter
      • Home Network Area of the Network at a Glance Panel
    • Accessing the Home Network Summary Page
  • Enabling Enhanced Services
    • Web Remote Access
    • Firewall Monitor
    • Parental Controls
• Setting a System Password
  • Resetting the System Password
    • Changing Your Time Zone Settings
• Viewing System Details
  • Broadband Link Tab
• Viewing Your Broadband Link Summary
  • Connection Status
  • Connection Speed
  • Connection Information
    • Finding Your Hardware Address
  • Connection Details
  • Monitor Internet Connection
  • Test Connection Speed
• Using Broadband Diagnostics
• Viewing Statistics
• Using Advanced Settings
  • Modifying DSL and ATM Settings
  • Modifying Broadband Connection Settings
  • Modifying the Hardware Address
  • Enabling Hostname Override
  • Modifying the Broadband IP
  • Modifying the Broadband DNS
    • Home Network Tab
• Viewing Your Home Network Summary
  • Understanding the Local Devices Panel
  • Understanding the Status at a Glance Panel
• Monitoring Your Wireless Settings
  • Customizing Security Settings
  • Configuring MAC Filtering
  • Configuring Additional Settings
• Configuring Advanced Settings
  • Setting up a Private Network
    • a. In the First DHCP Address field, enter the first DHCP address that you’ll be distributing over the private network.
    • b. In the Last DHCP Address field, enter the last DHCP address that you’ll be distributing over the private network.
    • c. In the Set DHCP Lease Time field, enter a value for the number of hours before the DHCP lease expires.
  • Setting Up a Public Routed Subinterface
  • Setting Up a Public Proxied Subnet
    • Selecting a Default DHCP Pool
  • Showing a Device as Inactive
    • VoIP Network Tab
• Configuring the VoIP Phones
  • Firewall Tab
• Firewall Features
• Viewing Your Firewall Summary
• Hosting an Application
  • Updating the Application Profile List
  • Adding an Application Profile
    • a. In the Protocol field, select the TCP or UDP radio button. If the application you are adding requires both, you must create a separate definition for each.
    • b. In the Port (or Range) field, enter the port or port range the application uses. For example, some applications may require only one port to be opened (such as TCP port 500); others may require that all TCP ports from 600 to 1000 be opened.
    • c. In the Protocol Timeout (seconds) field, you may optionally enter a value for the amount of time that can pass before the app...
    • d. In the Map to Host Port field, enter a value that will map the port range you established in step b to the local computer. Fo...
    • e. From the Application Type drop-down menu, select the application type. If you do not know the application type, select None (Default).
    • f. To edit the application profile, click EDIT. The Edit Application screen appears. Make the necessary changes to the application profile and click DONE.
    • g. To delete the application profile, click DELETE.
• Allowing all Applications (DMZplus)
• Viewing the Firewall Log
• Configuring the Firewall (Advanced)
  • Enabling Advanced Security
    • Stealth Mode
    • Block Ping
    • Strict UDP Session Control
  • Allowing Inbound and Outbound Traffic
  • Disabling Attack Detection
    • Management and Diagnostic Console
• Accessing the MDC
• Using the MDC
  • System Summary Page
  • Broadband Link Pages
  • Local Network Pages
  • Firewall Pages
  • Voice Pages
  • Troubleshooting Pages
  • Advanced Pages
• Remote Management Feature
• System Summary Page
• Broadband Link - Summary Page
• Broadband Link - Statistics Page
• Broadband Link - Detailed DSL Statistics Page
• Broadband Link - Configuration Page
  • Modifying DSL and ATM Settings
  • Modifying Internet Connection and Authentication Settings
  • Modifying Hardware Address
  • Modifying Internet Address Settings
  • Modifying DNS Information
• Local Network - Status Page
• Local Network - Statistics Page
• Local Network - Device List Page
• Local Network - Wireless Settings Page
  • Customizing Security Settings
  • Additional Settings
• Local Network - Configuration Page
  • Private Network Settings
  • Public Routed Subinterface Settings
  • Public Proxied Subnet Settings
  • Display Settings
  • Enable Router Behind Router Alert
• Firewall - Settings Page
  • Hosting an Application
  • Creating an Application Profile
  • Allowing all applications
• Firewall - Detailed Information Page
  • Pinholes
  • NAT Sessions
• Firewall - Advanced Settings Page
  • Enabling Security Features
  • Controlling Inbound and Outbound Traffic
  • Disabling Attack Detection
  • Enabling Full Logging
• Voice Server - Summary Page
• Voice - Configure Server Page
• Troubleshooting - DSL Diagnostics Page
  • Analyzing General Information
  • Reviewing Training History
  • Reviewing Bitloading
• Troubleshooting - Event Log Page
• Troubleshooting - Network Tests Page
• Troubleshooting - Upgrade History Page
• Troubleshooting - Resets Page
• Advanced - Syslog Settings Page
• Advanced - Provisioning Info Page
• Advanced - Configure Time Services Page
• Advanced - Configure Services Page
  • Routing
    • a. From the Windows desktop or the Start menu, right-click the My Network Places icon, then left-click Properties.
    • b. Right-click the icon that represents the network connection to the gateway, and left-click Properties.
    • c. Click Internet Protocol (TCP/IP), then click the Properties button.
    • d. In the General tab, click the Use the following IP address radio button. In the IP address field, enter an IP address between...
    • e. Click OK.
    • f. If required, reboot the system for the changes to take effect.
  • Changing Timeout Parameters
  • Enabling Broadband Status Notification
  • Enabling Missing DSL Filter Notification
  • Enabling SIP Application Layer Gateway
  • Changing the Upstream MTU
• Advanced - Static Routes
• Advanced - DNS Resolve Page
• Advanced - Traffic Shaping Page
• Advanced - Link Manager States Page
• Advanced - Detailed Log Page
  • Glossary
• A
• D
• E
• I
• L
• M
• N
• P
• R
• S
• T
• U
• V
• W
• Regulatory Information