3Com WX1200 3CRWX120695A Mobility System Software (MSS) Configuration Guide User Manual To The C53cc257 8ee0 4a72 A6a3 97f62f9e83ed
User Manual: 3Com WX1200 3CRWX120695A to the manual
Open the PDF directly: View PDF
Page Count: 728 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- About This Guide
- Using the Command-Line Interface
- WX Setup Methods
- Configuring AAA for Administrative and Local Access
- Managing User Passwords
- Configuring and Managing Ports and VLANs
- Configuring and Managing Ports
- Configuring and Managing VLANs
- Managing the Layer 2 Forwarding Database
- Port and VLAN Configuration Scenario
- Configuring and Managing IP Interfaces and Services
- MTU Support
- Configuring and Managing IP Interfaces
- Configuring the System IP Address
- Configuring and Managing IP Routes
- Managing the Management Services
- Configuring and Managing DNS
- Configuring and Managing Aliases
- Configuring and Managing Time Parameters
- Setting the Time Zone
- Configuring the Summertime Period
- Statically Configuring the System Time and Date
- Displaying the Time and Date
- Configuring and Managing NTP
- Adding an NTP Server
- Removing an NTP Server
- Changing the NTP Update Interval
- Resetting the Update Interval to the Default
- Enabling the NTP Client
- Displaying NTP Information
- Managing the ARP Table
- Pinging Another Device
- Logging In to a Remote Device
- Tracing a Route
- IP Interfaces and Services Configuration Scenario
- Configuring SNMP
- Overview
- Configuring SNMP
- Displaying SNMP Information
- Configuring and Managing Mobility Domain Roaming
- Configuring Network Domains
- About the Network Domain Feature
- Configuring a Network Domain
- Configuring Network Domain Seeds
- Specifying Network Domain Seed Peers
- Configuring Network Domain Members
- Displaying Network Domain Information
- Clearing Network Domain Configuration from a WX Switch
- Clearing a Network Domain Seed from a WX Switch
- Clearing a Network Domain Peer from a Network Domain Seed
- Clearing Network Domain Seed or Member Configuration from a WX Switch
- Network Domain Scenario
- Configuring MAP Access Points
- MAP Overview
- Configuring MAPs
- Specifying the Country of Operation
- Configuring an Auto-AP Profile for Automatic MAP Configuration
- Configuring MAP Port Parameters
- Configuring MAP-WX Security
- Configuring a Service Profile
- Creating a Service Profile
- Removing a Service Profile
- Changing a Service Profile Setting
- Disabling or Reenabling Encryption for an SSID
- Disabling or Reenabling Beaconing of an SSID
- Changing the Fallthru Authentication Type
- Changing Transmit Rates
- Enforcing the Data Rates
- Disabling Idle-Client Probing
- Changing the User Idle Timeout
- Changing the Short Retry Threshold
- Changing the Long Retry Threshold
- Configuring a Radio Profile
- Configuring Radio-Specific Parameters
- Mapping the Radio Profile to Service Profiles
- Assigning a Radio Profile and Enabling Radios
- Disabling or Reenabling Radios
- Configuring Local Packet Switching on MAPs
- Displaying MAP Information
- Displaying MAP Configuration Information
- Displaying Connection Information for Distributed MAPs
- Displaying a List of Distributed MAPs that Are Not Configured
- Displaying Active Connection Information for Distributed MAPs
- Displaying Service Profile Information
- Displaying Radio Profile Information
- Displaying MAP Status Information
- Displaying Static IP Address Information for Distributed MAPs
- Displaying MAP Statistics Counters
- Displaying the Forwarding Database for a MAP
- Displaying VLAN Information for a MAP
- Displaying ACL Information for a MAP
- Configuring RF Load Balancing for MAPs
- Configuring WLAN Mesh Services
- Configuring User Encryption
- Configuring RF AutoTuning
- Configuring MAPs To Be AeroScout Listeners
- Configuring Quality of Service
- Configuring and Managing Spanning Tree Protocol
- Overview
- Enabling the Spanning Tree Protocol
- Changing Standard Spanning Tree Parameters
- Configuring and Managing STP Fast Convergence Features
- Displaying Spanning Tree Information
- Spanning Tree Configuration Scenario
- Configuring and Managing IGMP Snooping
- Configuring and Managing Security ACLs
- About Security Access Control Lists
- Creating and Committing a Security ACL
- Mapping Security ACLs
- Modifying a Security ACL
- Using ACLs to Change CoS
- Enabling Prioritization for Legacy Voice over IP
- General Guidelines
- Enabling VoIP Support for TeleSym VoIP
- Enabling SVP Optimization for SpectraLink Phones
- Known Limitations
- Configuring a Service Profile for RSN (WPA2)
- Configuring a Service Profile for WPA
- Configuring a Radio Profile
- Configuring a VLAN for Voice Clients
- Configuring an ACL to Prioritize Voice Traffic
- Setting 802.11b/g Radios to 802.11b (for Siemens SpectraLink VoIP Phones only)
- Disabling RF Auto-Tuning Before Upgrading a SpectraLink Phone
- Restricting Client-To-Client Forwarding Among IP-Only Clients
- Security ACL Configuration Scenario
- Managing Keys and Certificates
- Why Use Keys and Certificates?
- About Keys and Certificates
- Certificates Automatically Generated by MSS
- Creating Keys and Certificates
- Choosing the Appropriate Certificate Installation Method for Your Network
- Creating Public-Private Key Pairs
- Generating Self-Signed Certificates
- Installing a Key Pair and Certificate from a PKCS #12 Object File
- Creating a CSR and Installing a Certificate from a PKCS #7 Object File
- Installing a CA’s Own Certificate
- Displaying Certificate and Key Information
- Key and Certificate Configuration Scenarios
- Configuring AAA for Network Users
- About AAA for Network Users
- AAA Tools for Network Users
- Configuring 802.1X Authentication
- Configuring Authentication and Authorization by MAC Address
- Configuring Web Portal WebAAA
- Configuring Last-Resort Access
- Configuring AAA for Users of Third-Party APs
- Assigning Authorization Attributes
- Overriding or Adding Attributes Locally with a Location Policy
- Configuring Accounting for Wireless Network Users
- Displaying the AAA Configuration
- Avoiding AAA Problems in Configuration Order
- Configuring a Mobility Profile
- Network User Configuration Scenarios
- Configuring Communication with RADIUS
- Managing 802.1X on the WX Switch
- Configuring SODA Endpoint Security for a WX Switch
- About SODA Endpoint Security
- Configuring SODA Functionality
- Configuring Web Portal WebAAA for the Service Profile
- Creating the SODA Agent with SODA Manager
- Copying the SODA Agent to the WX Switch
- Installing the SODA Agent Files on the WX Switch
- Enabling SODA Functionality for the Service Profile
- Disabling Enforcement of SODA Agent Checks
- Specifying a SODA Agent Success Page
- Specifying a SODA Agent Failure Page
- Specifying a Remediation ACL
- Specifying a SODA Agent Logout Page
- Specifying an Alternate SODA Agent Directory for a Service Profile
- Uninstalling the SODA Agent Files from the WX Switch
- Displaying SODA Configuration Information
- Managing Sessions
- Rogue Detection and Countermeasures
- Overview
- About Rogues and RF Detection
- Summary of Rogue Detection Features
- Configuring Rogue Detection Lists
- Enabling Countermeasures
- Disabling or Reenabling Active Scan
- Enabling MAP Signatures
- Disabling or Reenabling Logging of Rogues
- Enabling Rogue and Countermeasures Notifications
- IDS and DoS Alerts
- Displaying RF Detection Information
- Managing System Files
- Troubleshooting a WX Switch
- Fixing Common WX Setup Problems
- Recovering the System When the Enable Password is Lost
- Configuring and Managing the System Log
- Running Traces
- Using display Commands
- Port Mirroring
- Remotely Monitoring Traffic
- Capturing System Information and Sending it to Technical Support
- Enabling and Logging Into Web View
- Supported RADIUS Attributes
- Traffic Ports Used by MSS
- DHCP Server
- Obtaining Support for Your 3Com Products
- Glossary
- Index
- Command Index