3J Tech ILP0001F IDEAL LIFE POD User Manual
3J Tech. Co., Ltd. IDEAL LIFE POD Users Manual
3J Tech >
Users Manual
IDEAL LIFE Pod ™ Communication Gateway (Access Point) Model ILP0001 INSTRUCTION MANUAL Read before use For use with devices from the IDEAL LIFE Health Management System™ Products may vary from images shown NOTE: The system is intended for information purposes only, for expert advice make sure to consult a healthcare professional. Any instructions for change in treatment and health related information or advice should only be made directly with a healthcare professional. 08 LP0001 CellPod manual v7.0 Jan 2015 Table of Contents Table of Contents TABLE OF CONTENTS.....................2 INTRODUCTION...............................3 PACKAGE CONTENTS.....................4 LOCATION/INTERFERENCE...........5 Your IDEAL LIFE Pod™......................6 08 LP0001 CellPod manual v7.0 Jan 2015 Connecting Your IDEAL LIFE Cellular Pod™........................................7 SPECIFICATIONS .................................8 FCC STATEMENT..................................9 SERVICE REQUIREMENTS................10 Introduction Introduction Preface Thank you for purchasing the IDEAL LIFE Cellular Pod™, also called ILP 0001. This is an optional product that is used together with your other IDEAL LIFE products. The Pod allows you to automatically send and record information, to help you better manage your health with your health care provider. After readings are taken, they are stored and the Pod transmits them so that they can be viewed online as graphs and tables. CAUTION: Before using this product, read all instructions thoroughly. For any questions or comments, please call IDEAL LIFE customer service toll-free at 1-866-IDEAL-41 (1-866-433-2541). 08 LP0001 CellPod manual v7.0 Jan 2015 Package Contents Package Contents Your System includes: ILP 0001 IDEAL LIFE Cellular POD™ AC ADAPTER INSTRUCTION MANUAL ------------------------------------------------------------------------------------------------------------------------------------Optional Accessory (may be included) RJ45 CABLE 08 LP0001 CellPod manual v7.0 Jan 2015 IDEAL LIFE Cellular Pod™ Location/Interference Location/Interference The IDEAL LIFE Cellular Pod™ uses wireless radio waves to transfer information from your IDEAL LIFE Manager™. For the best distance and least interference, the recommended IDEAL LIFE Cellular Pod™ location is: • Away from electrical appliances such as a TV, personal computer or a cordless phone • In a HIGH and CENTRAL location with no obstructions such as walls 08 LP0001 CellPod manual v7.0 Jan 2015 Your IDEAL LIFE Pod™ Your IDEAL LIFE Cellular Pod™ LED Display Antenna attachment AC adapter jack Internet Cable RJ45 Jack USB Port (not used) 08 LP0001 CellPod manual v7.0 Jan 2015 Connecting Your IDEAL LIFE Cellular Pod™ Connecting Your IDEAL LIFE Cellular Pod™ USING CELLULAR INTERNET Information may be transmitted using cellular Internet. Make sure Pod is Powered On. To do this, simply connect the small end of the power supply into the power AC jack on the back of the IDEAL LIFE Cellular Pod™ marked POWER. Plug the other end into an AC power outlet. Your IDEAL LIFE Cellular Pod™will automatically power up once it is plugged in to an AC power outlet. Information from the IDEAL LIFE Manager™ will automatically be uploaded to the IDEAL LIFE website. USING AN RJ45 JACK Another way to transmit information is using the Ethernet cord and the RJ45 jack. To do this, plug one end of the Ethernet cord into a modular RJ45 wall jack. Plug the other end of the Ethernet cord into the RJ45 jack on the back of your IDEAL LIFE Pod™. Connect the small end of the power supply into the power AC jack on the back of the IDEAL LIFE Pod™marked POWER. Plug the other end into an AC power outlet. Your IDEAL LIFE Cellular Pod™ will automatically power up once it is plugged in to an AC power outlet. 08 LP0001 CellPod manual v7.0 Jan 2015 IDEAL LIFE Cellular Pod™ Model: ILP 0001 IDEAL LIFE Cellular Pod™ Connectivity: USB and Ethernet Antenna: External Operating System: Linux Display: 4 LEDs + 4 Signal Strength Bars Power Source: Class 2 Power Adapter 6.3V 1A Operating Temperature/Humidity: 32 F - 131 F / Below 85% relative humidity Storage temperature/Humidity: 0F - 185F / Below 90% relative humidity Console weight: 5.11 oz Outer dimensions: Approx. 4.72” Width x 1.32” Height x 4.29” Depth Note: 08 LP0001 CellPod manual v7.0 Jan 2015 FCC Statement FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: - Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. - This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 08 LP0001 CellPod manual v7.0 Jan 2015 Service Requirements Service Requirements In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. It is the responsibility of the User to report the need for service to our Company or authorized agent. Please refer to the original location of purchase for service details. 08 LP0001 CellPod manual v7.0 Jan 2015 10 IDEAL LIFE INC. Customer Support Hours: Between 9:00 am and 8:00 pm (EST) Monday to Friday Tel 1-866-IDEAL-41 1-866-433-2541 www.IDEALLIFEonline.com At all other times, you should contact your healthcare professional for assistance. © 2001 - 2015 IDEAL LIFE INC. All rights reserved. IDEAL LIFE is a registered trademark in the United States for Manager, IDEAL LIFE BP-Manager, IDEAL LIFE Gluco-Manager, IDEAL LIFE Pod, IDEAL LIFE Step Manager, IDEAL LIFE Breath Manager, IDEAL LIFE Direct Connect, IDEAL LIFE SpO2 Manager, IDEAL LIFE Medication Manager, IDEAL LIFE Health Tablet, IDEAL LIFE Communication Enabler, Caregiver Relief, Your Gateway to Health, Leveraging the Power of Communication, Reinventing Healthcare for an IDEAL LIFE, IDEAL LIFE Health & Wellness Solution, are all proprietary trademarks of IDEAL LIFE INC. Contents are covered by issued U.S. patents and one or more U.S. patents pending. Manufactured for IDEAL LIFE INC., 2200 Yonge St., Suite 1300 Toronto, Ontario M4S 2C6 Canada. Made in China. Products may vary from pictures shown.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:04:04 01:54:04+08:00 Metadata Date : 2015:12:17 16:37:08+08:00 Modify Date : 2015:12:17 16:37:08+08:00 Creator Tool : Adobe InDesign CC (Windows) Thumbnail Width : 200 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11753 bytes, use -b option to extract) Instance ID : uuid:a5fcffaa-2f95-4417-a54a-994fba11cd6a Original Document ID : xmp.did:176C278706EAE011932EE537ABAB0084 Document ID : xmp.id:9adb088a-3ce7-3040-85ad-6b6d1640ef58 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5d048497-6688-7f43-8321-8fac955c40b1 Derived From Document ID : xmp.did:A10792B23E7AE311A1FD8B0967DF2746 Derived From Original Document ID: xmp.did:176C278706EAE011932EE537ABAB0084 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Windows) History Changed : / History When : 2014:04:04 01:54:04+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 612.000000 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : MyriadPro-Regular, GillSansMT-Bold Font Family : Myriad Pro, Gill Sans MT Font Face : Regular, Bold Font Type : Open Type, TrueType Font Version : Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.01 Font Composite : False, False Font File Name : MyriadPro-Regular.otf, fontscore.com_g-gill-sans-mt-bold.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Has XFA : No Page Count : 11 Creator : Adobe InDesign CC (Windows)EXIF Metadata provided by EXIF.tools