3M Cogent ACD100P-CS Mini-Gate, Normal CPU, Philips card reader, standard version User Manual Mini Gate ACD100P
3M Cogent, Inc. Mini-Gate, Normal CPU, Philips card reader, standard version Mini Gate ACD100P
User Manual rev
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1801966 |
| Application ID | Rys7T/M7eGV9T8RNF+rF+Q== |
| Document Description | User Manual rev |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.56kB (632027 bits) |
| Date Submitted | 2012-09-26 00:00:00 |
| Date Available | 2012-09-28 00:00:00 |
| Creation Date | 2012-07-06 15:13:53 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2012-07-06 15:19:13 |
| Document Title | Mini-Gate User Manual-ACD100P... |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | mary |
Device Installation Guide Option 2 : The cassette (86x86) on wall Option 1 : On wall directly Step 1 Mini-Gate User Manual Address : 10/F，Tinwe Industrial Park Phase 2, Liufang Road No.6, Step 1 Step 3 Step 2 Step 1: Screw stainless steel plate according to the 4 holes marked on the drawing,choose right size of screws by different walls. Step 2: Insert installing device aimed to stainless steel plate. Step 3: Fasten this screw on the bottom. Area No.67, Baoan District, ShenZhen Tel ：+ 86 - 755 - 86013579 Step 2 Step 3 Step 4 Step 1: Cassette（86*86） Step 2: Screw fixing board to cassette, choose the right size of screws by different cassettes. Step 3: Cover the fixing board. Step 4: Screw stainless steel plate to fixing board, then install device on the stainless steel plate. Fax：+ 86 - 755 - 86013575 Introduction for Function and Technical Data LCD USB Port Fingerprint Sensor Processor：SAM9G45@400MHz, Processor Memory：128 MB DDR/ 128MB Flash Expansion Memory：Micro SD(2GB for default configuration) Mini-Gate biometric access control LCD Display：1.8" TFT Color LCD LED Indicator： Multi-color × 3 1 3 4 8 9 14 15 20 Type Fixing board B (plastic) Screw （PM4X5） 4+2 Screw（PWM3X5） Relay Wiegand Power Adapter（DC 12V/1.5A） RJ45 Network Port Connector DC12V Power Connector L spanner Mini-Gate User Manual Keypad：3 X 5 keypad Color Yellow Orange Audio：Beep PC Port：High Speed USB2.0 Black Brown Built-in Relay: 1 Power supply：12V DC/1.5A Current：450mA @ 12V Operating Temperature：0 ~ 50˚ C Storage Temperature：0 ~ 60˚ C Fingerprint Sensor：Cogent CSD100, Reset Botton Speaker Quantity Fixing board A (plastic) Key Pad Model：ACD100P-CS List LED Contactless Card Area (Keypad Part is for RF Card Reading Area) RS485 Power Ethernet Name No Relay 12V+ Relay- GND(Relay GND) Wiegand_In_D1/LED_Input Wiegand_In_D0 GND(Wiegand GND) Wiegand_Out_D1 Wiegand_Out_D0 P_GND(Safety GND) Purple Black White Green Yellow&Green & Black 10 GND(RS485 GND) 11 RS485+ Blue 12 RS485- Gray 13 GND(Power GND) Black 14 Power_In(12V) 15 16 17 RX- 18 RX+ 19 TX- Green White 20 TX+ Yellow 500dpi Optical Sensor, (FBI Certified) Matching Speed：1:1 ≤1.2s，1:N ≤2s (N≤5000) Red FRR：1% POE- Green FAR：0.001% POE+ Yellow Blue Matching Security Grade：Lower, Middle, High (Configurable) Acceptable Fingerprint Rotation：+/-15 degree (Default) Module and Function Guide Advanced Mode Standard Mode Add Administrator Time Setting OK OK Delete Administrator Administrator Setting and User Setting OK OK Lightness Setting Add User OK Note: Factory Default: Administrator user ID:"1"; Pin #:"1". This will be invalid after new admin setup. "User setting" should be changed to "admin setting" OK Delete User OK Voice Setting Fingerprint Mode OK For fingerprint identify, select this mode. OK Fingerprint + Card Mode OK Mode Setting OK For fingerprint + card identify, select this mode. Card + PIN Mode Network Setting OK For card + pin identify, select this mode. OK Fingerprint + Card + PIN Mode OK For fingerprint + card + pin identify, select this mode. FCC Statements changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for Remark: USB port is used to firmware upgrade purpose, without loading.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2012:07:06 15:13:53+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:07:06 15:19:13+08:00 Metadata Date : 2012:07:06 15:19:13+08:00 Format : application/pdf Creator : mary Title : Mini-Gate User Manual-ACD100P... Document ID : uuid:ea6f93e4-8556-4067-9ce9-80039c61a2b1 Instance ID : uuid:6382bde9-70f1-443c-80b0-64e1e827b4ef Page Count : 3 Author : maryEXIF Metadata provided by EXIF.tools