3Si Security Systems AT140720A Asset Tracking and Alert Device User Manual 3SI Regulatory Notices AT140720US 2015 01 09
3Si Security Systems Inc. Asset Tracking and Alert Device 3SI Regulatory Notices AT140720US 2015 01 09
Contents
- 1. quick reference guide
- 2. regulatory user notices
regulatory user notices
Important Safety Information Warning: Use of a non-3SI supplied battery may present a risk of fire, explosion, leakage, or other hazard. • Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. • Don’t use tools, sharp objects, or excessive force to insert or remove the battery as this can damage the battery. • Don’t let the device or battery come in contact with liquids. Liquids can get into the device’s circuits, leading to corrosion • Use with an already tested/certified micro-USB wall charger. Regulatory Notices FCC ID: Q6KAT140720A Model: AT140720US INDUSTRY CANADA ID: 5043A-AT140720A Model: AT140720US a) NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the FCC authorization to operate this equipment. c) Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other (than provided by 3SI) antenna or transmitter. d) NOTICE: This transmitter is authorized by rule under the Low Power Radio Service (47 CFR part 95) and must not cause harmful interference to TV reception or United States Navy SPASUR installations. You do not need an FCC license to operate this transmitter. This transmitter may only be used to provide: auditory assistance to persons with disabilities, persons who require language translation, or persons in educational settings; health care services to the ill; law enforcement tracking services under agreement with a law enforcement agency; or automated maritime telecommunications system (AMTS) network control communications. Two-way voice communications and all other types of uses not mentioned above are expressly prohibited. e) NOTICE: This device may not interfere with TV reception or Federal Government radar. a.) NOTICE: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : • l'appareil ne doit pas produire de brouillage et • l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. b.) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the IC authorization to operate this equipment. Toute modification non autorisée par 3SI Security Systems,Inc apportée à cet équipement pourrait entrainer l'annulation de l'autorisation de la IC d'opérer cet équipement. c.) Radio frequency radiation exposure Information: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux exigences d’exposition aux radiofréquences de la IC pour un environnement non contrôlé. Il devrait être installé et opéré d'une distance minimum de 20 cm entre le radiateur et votre corps. Le transmetteur ne doit pas être situé ou opéré en conjonction avec une autre antenne ou transmetteur. d.) Antenna Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Normas Oficiales Mexicanas Model: AT140720US NOTICE: This device complies with the NOM safety standards: •NOM-001-SCFI-1993 •NOM-003-SCFI-2000 •NOM-016-SCFI-1993 •NOM-019-SCFI-2000 2015-01-09 AT140720REG
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e61e2036-9c30-11e4-0000-8eea7872c4f6 Producer : GPL Ghostscript 9.07 Keywords : () Modify Date : 2015:01:11 16:04:00-05:00 Create Date : 2015:01:11 16:04:00-05:00 Creator Tool : PDFCreator Version 1.7.1 Document ID : uuid:e61e2036-9c30-11e4-0000-8eea7872c4f6 Format : application/pdf Title : 3SI_Regulatory_Notices_AT140720US_2015-01-09 Creator : WSierocinski Description : () Author : WSierocinski Subject :EXIF Metadata provided by EXIF.tools