3e Technologies WLAN-MP2 3eTI WLAN mini-PCI Module User Manual Revised
3e Technologies International, Inc. 3eTI WLAN mini-PCI Module Users Manual Revised
Users Manual Revised
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 581082 |
| Application ID | SIoWtqZbvQubVnL6vgdRKg== |
| Document Description | Users Manual Revised |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.69kB (183574 bits) |
| Date Submitted | 2005-09-13 00:00:00 |
| Date Available | 2005-09-13 00:00:00 |
| Creation Date | 2005-09-08 09:32:41 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2005-09-08 17:37:12 |
| Document Title | Users Manual Revised |
3eTI WLAN Mini-PCI Module CM9 Internal Installation Manual (FCC ID: QVT-WLAN-MP2) 20000505-001 Revision A August, 2005 Important Note: The CM9 module, combined with the proven high-gain antennas, is only for 3e Technologies International (3eTI) internal use to build Wireless Local Area Network (WLAN) Equipment. 3eTI does not sell the CM9 WLAN module to either end users or OEM parties. Proprietary: This document is issued in strict confidence on condition that it is not copied, reprinted, or disclosed to a third party, either wholly or in part, without prior written consent of 3e Technologies International, Inc. 20000505-001 Revision A CM9 Internal Installation Manual Copyright © 2005 3e Technologies International. All rights reserved. No part of this documentation may be reproduced in any form or by any means or to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3e Technologies International. 3e Technologies International reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of 3e Technologies International to provide notification of such revision or change. 3e Technologies International provides this documentation without warranty, term or condition of any kind, either implied or expressed, including, but not limited to, the implied warranties, terms, or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. 3e Technologies International may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. If there is any software or removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the printed documentation, or on the removable media in a readable file such as license.txt or the like. If you are unable to locate a copy of the license, contact 3e Technologies International and a copy will be provided to you. UNITED STATES GOVERNMENT LEGEND If you are a United States Government agency, then this documentation and the product described herein are provided to you subject to the following: All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in 3e Technologies International’s standard commercial license for the software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide. 3e Technologies International and the 3e Technologies International logo are registered trademarks. Windows is a registered trademark of Microsoft Corporation. Any other company and product name mentioned herein is a trademark of the respective company with which they are associated. EXPORT RESTRICTIONS 3e Technologies International products contain encryption and may require U.S. and/or local government authorization prior to export to another country. FEDERAL COMMUNICATION COMMISSION STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the 3eTI for help. FCC Caution: To assure continued compliance (example - use only shielded interface cables when connecting to computer or peripheral devices), any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Page 2 of 10 Proprietary & Confidential August, 2005 CM9 Installation Manual ########-### Revision A IMPORTANT NOTES RF APPLICATION This FCC ID (QVT-WLAN-MP2) for the combination of the CM9 WLAN module and high gain antennas is restricted to the outdoor application only. It is only used for 3eTI WLAN outdoor equipment application and the module cannot be sold to endusers or OEM parties directly. It has to always meet the conditions below: 1. The antenna model 4010 or equipment of the module should be installed and operated with a minimum distance of one (1) meter between the radiator and all persons. The other antenna model HG5822G or equipment of the module should also be installed and operated with minimum distance of one (1) meter between the radiator and all persons. 2. The directional antennas should be separated from other WLAN directional antennas with the similar frequency at a minimum distance of one (1) meter. The antennas cannot be pointed to the same direction. As long as the two conditions above are met, further transmitter testing will not be required. However, 3eTI is still responsible for testing the 3eTI end product for any additional compliance requirements required with this module installed (e.g., FCC part 15 for digital device emissions test). FCC ID In the event that these conditions listed above cannot be met (e.g., use of the 5.8GHZ high gain antennas for indoor application), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the 3eTI will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. END PRODUCT LABELING This transmitter module is authorized only for use in devices where the antenna may be installed such that one (1) meter (refer to RF Application Note above) may be maintained between the antenna and users (e.g., wireless outdoor access points and bridges). The final end product must be labeled in a visible area with the following: "Contains FCC ID: QVT-WLAN-MP2". PROHIBITIONS The end user SHALL NOT be provided with any instructions on how to remove or install the CM9 device. Revision 00.01.00 PRINTED COPY UNCONTROLLED UNLESS PRINTED ON IVORY PAPER – VERIFY LATEST REVISION ONLINE. Proprietary Page 3 of 10 20000505-001 Revision A CM9 Internal Installation Manual APPROVALS Prepared By: Frank Li (Date) Norm Lutz (Date) John Fossaceca (Date) Thurston Brooks (Date) Hardware Engineering: Software Engineering Vice President of Engineering CHANGE HISTORY Revision Release Doc Approval Date 08/18/05 Change Description Initial Release. TABLE OF CONTENTS 1. INTRODUCTION .................................................................................................................. 5 1.1. Features ............................................................................................................................................ 5 1.2. Basic System Requirements............................................................................................................ 5 1.3. RF Connection ................................................................................................................................. 5 2. HARDWARE SPECIFICATION............................................................................................ 5 3. HARDWARE INSTALLATION & ANTENNA INFORMATION ............................................. 5 4. FCC LABEL ......................................................................................................................... 6 5. ANTENNA INSTALLATION ................................................................................................. 6 6. APPENDIX A - FIGURES..................................................................................................... 7 7. APPENDIX B - TABLES .................................................................................................... 10 Page 4 of 10 Proprietary & Confidential August, 2005 CM9 Internal Installation Manual 1. 20000505-001 Revision A INTRODUCTION The CM9 Wireless Local Area Network (WLAN) module supports the IEEE 802.11a/b/g specification. It uses the standard mini-PCI interface as the digital port and a special U.FL connector as the RF port. The CM9 WLAN mini-PCI Module provides a wireless networking function. The dual-band wireless 802.11a/b/g mini-PCI bus adapter operates seamlessly and simultaneously in both the 2.4GHz and 5GHz frequency spectrums supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11a (5.8GHz, 54Mbps/108Mbps turbo mode) and 802.11g (2.4GHz, 54Mbps) wireless standards. It is the best way to add wireless capability to an existing wired network, or to add bandwidth to a wireless installation. To protect wireless connectivity, the dual-band wireless 802.11a/b/g mini-PCI bus adapter can encrypt all wireless transmissions through 64/128/152-bit WEP data encryption. Dynamic Frequency Selection (DFS) puts the network on the cleanest channel in a given location. 1.1. Features • • • • • • • • • 1.2. Basic System Requirements • 1.3. High-Speed data transfer rate up to 108Mbps 64-bit and 128-bit WEP Encryption MAC Address filtering Web-Based Network Manager/Telnet for Configuring and Managing Access Points SNMP MIB I and MIB II supported Capable of acting as a DHCP Server Remote Management supported Firmware Upgrade via WEB/TFTP IEEE802.1x/RADIUS Client (EAP-MD5/TLS/TTLS) Support A computer system that supports the mini- PCI platform and contains: • 32MB of memory, or greater • 200MHz processor, or higher RF Connection The CM9 WLAN module uses 50 ohm impedance U.FL connectors with maximum RF power of 18dbm. It has two RF connectors for the two RF ports (primary and secondary). The two RF ports provided an antenna diversity feature such that only the port with the best receiving signal quality will be used dynamically. The two ports support both 802.11b and 802.11g in the 2.4GHZ band, and 802.11a in the 5.8GHZ band with a software switch. See Figure A for details. 2. HARDWARE SPECIFICATION Table A lists the hardware specification for the CM9 Wireless Local Area Network (WLAN) module. 3. HARDWARE INSTALLATION & ANTENNA INFORMATION The FCC ID for the CM9 module when combined with proven high gain antennas shall be used only for the 3eTI outdoor WLAN access point or bridge applications. The module is not allowed to be sold to any retail party or to any OEM party. Due to FCC frequency restrictions and to the requirement of the high gain antennas for indoor and outdoor applications, the 5.15GHZ to 5.25GHZ indoor frequency band is disabled in 3eTI outdoor products. Figure C shows an example of the outdoor bridge 3e-523. Figure D is the open case view of the 3e-523 : The 3e-523 Processor PCBA loaded with the CM9 module is mounted in the outdoor enclosure. August, 2005 Proprietary & Confidential Page 5 of 10 20000505-001 Revision A 4. CM9 Internal Installation Manual FCC LABEL The CM9 Module must be labeled with its FCC ID (see Figure F). If the FCC ID label shown in Figure F is not visible when the module is installed inside another (external) device, the external device must also display a label referring to the enclosed module. The exterior label can be “Contains Transmitter Module FCC ID:QVT-WLAN-MP2” or similar wording (see Figure G). 5. ANTENNA INSTALLATION The high gain antennas must be installed outdoors on rooftops, towers, or poles in compliance with FCC rules. 3eTI enforces the requirement that its products must have professional installation due to the technical difficulty level during installation for all products that use standard polarity RF connectors. This professional installation requirement is written into the User Manual and sales agreement for 3eTI products. The following text provides an example of the requirement from the 3e-525A-2 Users Manual (Document 29000154-001 Revision A Page 11). FCC Regulations require that the 3e-525A-2 be professionally installed by an installer certified by the National Association of Radio and Telecommunications Engineers or equivalent institution. Only the following antenna types can be used: • Antenna 1: Vendor: NEARSON, Model: 4010 (use on the 2400-2483.5 MHz band only). ALERT!: The module antennae should be installed and operated with minimum distance of one (1) meter - 100 cm - between the radiator and all persons. • Antenna 2: Vendor: HyperGain, Model: HG5822G (use on the 5725-5826 MHz band only). ALERT!: The module antennae should be installed and operated with minimum distance of one (1) meter - 100 cm - between the radiator and all persons. Page 6 of 10 Proprietary & Confidential August, 2005 CM9 Internal Installation Manual 6. 20000505-001 Revision A APPENDIX A - FIGURES Figure A. Front View of the CM9 WLAN Module U.FL connector for the primary antenna port U.FL connector for the secondary antenna port Figure B. Rear View of the CM9 WLAN Module August, 2005 Proprietary & Confidential Page 7 of 10 20000505-001 Revision A CM9 Internal Installation Manual Figure C. Internal View - CM9 Card Mounted on the 3e-523 Processor PCBA Figure D. 3e-523 Open Case View Figure E. 3e-523 Outside View Reverse Polarity SMA connector for the RF ports Page 8 of 10 Proprietary & Confidential August, 2005 CM9 Internal Installation Manual 20000505-001 Revision A Figure F. CM9 Module FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure G. External Device CM9 Module FCC ID Citation Label August, 2005 Proprietary & Confidential Page 9 of 10 20000505-001 Revision A 7. CM9 Internal Installation Manual APPENDIX B - TABLES Item Frequency range Modulation technique Channels support Operation voltage Maximum Output Transmit Power Power consumption Operation distance Operation System supported Security Operation mode Transfer data rate Operation temperature Storage temperature Wi-Fi Alliance WHQL FAA Media access protocol Page 10 of 10 Key specifications U-NII: 5.725 ~ 5.825Ghz 2.400 – 2.483GHz 802.11b/g DSSS (DBPSK, DQPSK, CCK) OFDM for data rate > 20 Mbps 802.11a OFDM(BPSK,QPSK, 16-QAM, 64-QAM) 802.11b/g US/Canada: 11 (1 ~ 11) 802.11a 1). US/Canada:4 non-overlapping channels (5.725 ~ 5.825GHz) 3.3V +/- 5% 802.11a 20.27 dBm 802.11b 22.72 dBm 802.11g 22.91 dBm 802.11a 802.11b 802.11g Continuous Tx 490~510mA @18dBm 570~590mA @18dBm 610~640mA@18dBm Continuous Rx 340~350mA 360~380mA 420~440mA FTP Tx 420~440mA 510~530mA 530~545mA FTP Rx 400~420mA 470~485mA 490~510mA Standby mode 360~380mA 440~450mA 450~470mA Power saving mode 50mA 50mA 50mA RF Kill 40mA 40mA 40mA 802.11a Outdoor: 40m@72Mbps,85m@54Mbps,250m@48Mbps,310m@36Mbps Indoor:20m@72Mbps,25m@54Mbps,35m@48Mbps,40m@36Mbps 802.11b Outdoor:300m@11Mbps,465m@5.5Mbps,500m@2Mbps,515m@1Mbps Indoor: 60m@11Mbps,70m@5.5Mbps,83m@2Mbps,85m@1Mbps 802.11g Outdoor: 82m@54Mbps,100m@48Mbps,300m@36Mbps Indoor:20m@54Mbps,25m@48Mbps,35m@36Mbps Windows 98SE, ME, 2K, XP 64-bit,128-bit, 152-bit WEP Encryption 802.1x Authentication AES-CCM & TKIP Encryption Infrastructure & Ad-hoc mode 802.11b/g 11, 5.5, 2, 1 Mbps, auto-fallback, up to 54 Mbps 802.11a (Normal mode) 54, 48, 36, 24, 18, 12, 9, 6Mbps, auto-fallback 802.11a (Turbo mode) 108,96,72,48,36,24,18,12 Mbps, auto-fallback 0o ~ 70o C -20o ~ 80o C WECA Compliant Microsoft 2K, XP Complaint S/W audio On/Off support CSMA/CA with ACK architecture 32-bit MAC Proprietary & Confidential August, 2005
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2005:09:08 09:32:41Z Modify Date : 2005:09:08 17:37:12+08:00 Page Count : 10 Creation Date : 2005:09:08 09:32:41Z Mod Date : 2005:09:08 17:37:12+08:00 Producer : Acrobat Distiller 5.0 (Windows) Metadata Date : 2005:09:08 17:37:12+08:00EXIF Metadata provided by EXIF.tools