8BITDO TECH GBROS 8BitDo GBros. Adapter for GC/Classic controller User Manual

SHENZHEN 8BITDO TECH CO., LTD. 8BitDo GBros. Adapter for GC/Classic controller

User manual

8BitDo GBros. Adapter for GC/classic controllerInstruction ManualCompatibilityWired GameCube controllerWired NES Classic controllerWired SNES Classic controllerWired Wii Classic controllerThird party controller with the same controller portConnectivitySwitch1. Put the adapter on its S mode, gently press the HOME button to turn it on. Blue LED willstart to blink.2. Press PAIR button for 2 seconds to enter its pairing mode. Blue LED will start to rapidlyblink.3. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order topair with the adapter.4. Blue LED will become solid when connection is successful.Windows1. Put the adapter on its X mode, gently press the HOME button to turn it on. Blue LED willstart to blink.2. Press PAIR button for 2 seconds to enter its pairing mode. Blue LED will start to rapidlyblink.3. Go to your Windows device’s Bluetooth setting, pair with [8BitDo GBros Adapter].4. Blue LED will become solid when connection is successful.Turbo Functionality1. Hold the button you would like to set turbo functionality to, press the STAR button to GBros toactivate/deactivate the functionality.2. LED on GBros will start to blink when turbo functionality has been applied successfully.
Analog sticks and Dpad are not included.This does not apply to Switch.BatteryTwo AA batteries with 30 hours of play time.*Auto shut down - 1 minute with no connection- 15 minutes with no use on connectionSupportPlease visit support.8bitdo.com for further information and additional support.
FCC Statement15.191. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.15.21Note: The grantee is not responsible for any changes or modifications not expressly approved bythe party responsible for compliance. Such modifications could void the user’s authority to operatethe equipment.15.105(b)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help

Navigation menu