8BITDO TECH GBROS 8BitDo GBros. Adapter for GC/Classic controller User Manual
SHENZHEN 8BITDO TECH CO., LTD. 8BitDo GBros. Adapter for GC/Classic controller
User manual
8BitDo GBros. Adapter for GC/classic controller
Instruction Manual
Compatibility
Wired GameCube controller
Wired NES Classic controller
Wired SNES Classic controller
Wired Wii Classic controller
Third party controller with the same controller port
Connectivity
Switch
1. Put the adapter on its S mode, gently press the HOME button to turn it on. Blue LED will
start to blink.
2. Press PAIR button for 2 seconds to enter its pairing mode. Blue LED will start to rapidly
blink.
3. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order to
pair with the adapter.
4. Blue LED will become solid when connection is successful.
Windows
1. Put the adapter on its X mode, gently press the HOME button to turn it on. Blue LED will
start to blink.
2. Press PAIR button for 2 seconds to enter its pairing mode. Blue LED will start to rapidly
blink.
3. Go to your Windows device’s Bluetooth setting, pair with [8BitDo GBros Adapter].
4. Blue LED will become solid when connection is successful.
Turbo Functionality
1. Hold the button you would like to set turbo functionality to, press the STAR button to GBros to
activate/deactivate the functionality.
2. LED on GBros will start to blink when turbo functionality has been applied successfully.
Analog sticks and Dpad are not included.
This does not apply to Switch.
Battery
Two AA batteries with 30 hours of play time.
*Auto shut down - 1 minute with no connection
- 15 minutes with no use on connection
Support
Please visit support.8bitdo.com for further information and additional support.
FCC Statement
15.19
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
15.21
Note: The grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user’s authority to operate
the equipment.
15.105(b)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help