8BITDO TECHNOLOGY SN30 8Bitdo SN30 2.4G Wireless GamePad for SNES/SFC Classic Edition User Manual

8BITDO TECHNOLOGY HK LIMITED 8Bitdo SN30 2.4G Wireless GamePad for SNES/SFC Classic Edition Users Manual

User Manual

SN30 2.4G and SF30 2.4GInstruction Manual（Image）ConnectionNES/SNES/SFC Classic Edition (wireless connection)1. Plug the 2.4G Retro Receiver into your NES / SFC / SNES Classic Edition.2. Press START on your controller to connect to the Retro Receiver.3. LED willbe solidblue when connection is successful.Home Menu Access for NES/SNES/SFC Classic EditionSELECT + DOWN = RESETIf connection is lost oryouwishtopair with a new retro receiver,press andholdSELECT on the controller for3 seconds.Blue LED will rapidly blink and be solid blue when connection is successful.Windows/macOS/Android (wired connection)1. Connect the controller to your Windows/macOS/Android via the USB cable.2. LED will be solid blue when connection is successful.X-Input: press and hold START+X for 3 seconds, blue LED blinks twice to indicate mode activation.D-Input: press and hold START+B for 3 seconds, blue LED blinks twice to indicate mode activation.macOS: press and hold START+A for 3 seconds, blue LED blinks twice to indicate mode activation.Default mode: D-inputBatteryStatus LED IndicatorLow battery Power LED in redBattery charging Power LED in greenBattery fully charged Power LED turns off·Built-in 180 mAh Li-on with 25 Hours of play time.·Rechargeable via USB cable with 60 minutes charging time.Power Saving·Sleep mode - 15 minutes with no use.SupportPlease visit support.8bitdo.com for further information and additional support.
FCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that maycause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:　Reorient or relocate the receiving antenna.　Increase the separation between the equipment and receiver.　Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.　Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Navigation menu